Pasar al contenido principal

ESTRUCTURAS SUBWAVELENGTH PARA LA FOCALIZACION DE ULTRASONIDOS DE ALTA INTENSIDAD

TEC2015-70939-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2015
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Dirección General de Investigación Científica y Técnica
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 25
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Design of Binary-Sequence Zone Plates in High Wavelength Domains

  • Fuster Escuder, José Miguel|||0000-0001-7778-8834
  • Candelas Valiente, Pilar|||0000-0002-9924-7673
  • Rubio Michavila, Constanza|||0000-0002-4395-7473
  • Pérez-López, Sergio
[EN] The design of zone plates is an important topic in many areas of physics, such as optics, X-rays, microwaves or ultrasonics. In this paper, a zone plate design method, which provides high flexibility in the shaping of the focusing profile, is analyzed. This flexibility is achieved through the use of binary sequences that produce zone plates with different properties and applications. It is shown that this binary-sequence method works properly at low wavelengths, but requires a modification term to work accurately in high wavelength domains. This additional term extends this powerful design method to any wavelength. Simulation results show acoustic focusing profiles for Fresnel, Fibonacci and Cantor zone plates operating at a wavelength of 1.5 mm without any distortion., This work was supported by the Spanish MINECO (TEC2015-70939-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Sound Focusing Capability of a CO2 Gas-Filled Cuboid

  • Tarrazó-Serrano, Daniel|||0000-0001-9986-0884
  • Rubio Michavila, Constanza|||0000-0002-4395-7473
  • Uris Martínez, Antonio|||0000-0002-2005-2305
  • Minin, O. V.
  • Minin, I. V.
[EN] The ability of focus waves with concave or convex surfaces is well known both in optics and in acoustics. Nowadays, the possibility of beamforming sound with flat lenses is a hot topic because of its application in different areas such as biomedical engineering or non-destructive techniques. In this paper, we propose a gas filled cuboid lens that has a different sound speed than that of the surrounding medium (air in our case) as a beamforming acoustic device. This constitutes an experimental visualization of the capability of sound focusing with flat surfaces lens and allows understanding the corresponding physic phenomenon., This work was financially supported by the Spanish MINECO through project TEC2015-70939-R and partially was carried out within the framework of the Tomsk Polytechnic University Competitiveness Enhancement Program, Russia. D.T.-S. acknowledges financial support from Ministerio de Ciencia, Innovacion y Universidades de Espana through grant BES-2016-077133.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

On the use of phase correction rings on Fresnel zone plates with ultrasound piston emitters

  • Sergio Pérez-López
  • Fuster Escuder, José Miguel|||0000-0001-7778-8834
  • Candelas Valiente, Pilar|||0000-0002-9924-7673
  • Rubio Michavila, Constanza|||0000-0002-4395-7473
  • Belmar Ibáñez, Francisco|||0000-0003-4412-0007
[EN] In this work, the distortion of the Fresnel Zone Plate focusing profile generated by a piston emitter in ultrasound applications is significantly reduced through the use of phase correction rings, which compensate the effect of the piston emitter radiation diagram. Both simulation and experimental results demonstrate the improvement achieved with this design method over the conventional case., This work has been supported by Spanish MINECO (TEC2015-70939-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Application of Phase-Reversal Fresnel Zone Plates for Improving The Elevation Resolution in Ultrasonic Testing with Phased Arrays

  • Dolmatov, Dmitry O.
  • Filippov, German A.
  • Minin, Igor V.
  • Minin, Oleg V.
  • Sednev, Dmitry A.
  • Tarrazó-Serrano, Daniel|||0000-0001-9986-0884
[EN] Currently, phased arrays have found wide application in ultrasonic nondestructive testing. Volumetric results provided by the inspections with linear phased arrays have low lateral resolution in the elevation direction of such probes. This fact complicates the defects characterization task. In this paper, we suggest the application of the Phase-Reversal Fresnel Zone Plate to increase the resolution of volumetric imaging with linear phased arrays. Application of such plates is aimed at ultrasonic focusing in the elevation plane whereas focusing on the active aperture plane is provided by the application of the Sampling Phased Array. Furthermore, the use of the Phase-Reversal Fresnel Zone Plate is advantageous due to the capability of its 3D printing and introduction to the existing automated testing systems avoiding making changes to the current software and hardware. The effectiveness of the plates was verified experimentally on the existing automated testing system. The obtained experimental results demonstrate that the application of the Phase-Reversal Fresnel Zone Plate allowed achieving the results of the higher resolution as well as improving the signal to noise ratio., This work has been supported by the Spanish MINECO (TEC2015-70939-R) and MICINN (RTI2018-100792-B-I00). The research is funded by the Governmental program "Science", research projects No. 11.3683.2017/4.6 and No. 11.6342.2017/8.9. The research is carried out within the framework of Tomsk Polytechnic University Competitiveness Enhancement Program grant, the Project number is VIU-IShNKB-77/2019.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Sound focusing of a wavelength-scale gas-filled flat lens

  • Rubio Michavila, Constanza|||0000-0002-4395-7473
  • Tarrazó-Serrano, Daniel|||0000-0001-9986-0884
  • Uris Martínez, Antonio|||0000-0002-2005-2305
  • Minin, Oleg V.
  • Minin, Igor V.
[EN] The capability of focusing of a novel acoustic lens based on a mesoscale acoustic cuboid particle filled with CO2 gas is analysed. This flat lens is able to focus sound in the same way that conventional curved acoustic lenses do. It is shown that the sound speed inside the cuboid is the responsible for this effect. By changing the percentage of CO2, the sound speed inside the cube changes and, therefore, the focusing properties change as well. The focusing effect is numerically investigated and experimentally validated. The results obtained allow the design of new flat low cost acoustic lenses with wavelength-scale dimensions for different applications., This work has been supported by TEC2015-70939-R (MINECO/FEDER). The research was partially supported by Tomsk Polytechnic University Competitiveness Enhancement Program. IVM and OVM would like to thank Dr RUBEN PICO VILA for useful discussions.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

MRI Compatible Planar Material Acoustic Lenses

  • Tarrazó-Serrano, Daniel|||0000-0001-9986-0884
  • Castiñeira-Ibáñez, Sergio|||0000-0001-6414-3906
  • Uris Martínez, Antonio|||0000-0002-2005-2305
  • Rubio Michavila, Constanza|||0000-0002-4395-7473
  • Sánchez Aparisi, Eugenio
[EN] Zone plate lenses are used in many areas of physics where planar geometry is advantageous in comparison with conventional curved lenses. There are several types of zone plate lenses, such as the well-known Fresnel zone plates (FZPs) or the more recent fractal and Fibonacci zone plates. The selection of the lens material plays a very important role in beam modulation control. This work presents a comparison between FZPs made from different materials in the ultrasonic range in order to use them as magnetic resonance imaging (MRI) compatible materials. Three different MRI compatible polymers are considered: Acrylonitrile butadiene styrene (ABS), polymethyl methacrylate (PMMA) and polylactic acid (PLA). Numerical simulations based on finite elements method (FEM) and experimental results are shown. The focusing capabilities of brass lenses and polymer zone plate lenses are compared., This research was funded by spanish Ministerio de Economía y Competitividad (MINECO) TEC2015-70939-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Wavelength-scale gas-filled cuboid acoustic lens with diffraction limited focusing

  • Rubio Michavila, Constanza|||0000-0002-4395-7473
  • Tarrazó-Serrano, Daniel|||0000-0001-9986-0884
  • Uris Martínez, Antonio|||0000-0002-2005-2305
  • Minin, Oleg V.
  • Minin, Igor V.
[EN] Per the laws of geometrical optics, a plane-parallel medium does not possess focusing properties. However, in this paper, we demonstrate for the first time that an acoustic cuboid particle filled with CO2 is able to focus sound despite its flat surface. It is worth noting that traditional lenses focus sound through their curved surfaces. We report both numerically and experimentally the acoustic focusing of a cuboid of 2¿ side, where ¿ is the wavelength in air. From these results, it can be derived that its focusing capabilities are close to the diffraction limit: at frequency of 5000 Hz, acoustic beam waist is about 0.5 wavelength and the gain is 8.8 dB. The flat structure lens proposed open new possibilities to design and built new lightweight and low cost acoustic lenses for different applications., This work was financially supported by the Spanish MINECO through project TEC2015-70939-R and IVM was partially supported by Tomsk Polytechnic University Competitiveness Enhancement Program.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Polyadic Cantor Fractal Ultrasonic Lenses: Design and Characterization

  • Castiñeira-Ibáñez, Sergio|||0000-0001-6414-3906
  • Tarrazó-Serrano, Daniel|||0000-0001-9986-0884
  • Fuster Escuder, José Miguel|||0000-0001-7778-8834
  • Candelas Valiente, Pilar|||0000-0002-9924-7673
  • Rubio Michavila, Constanza|||0000-0002-4395-7473
[EN] Traditional acoustic lenses modulate the ultrasonic beam due to their curved surfaces and the refractive material of which they are made. In this work, a different type of acoustic lens, based on Polyadic Cantor Fractals (PCF), is presented and thoroughly analyzed. These new Polyadic Cantor Fractal Lenses (PCFLs) are completely flat and easy to build, and they present interesting modulation capabilities over the acoustic profile. The dependence of the focusing profile on the PCFL design parameters is fully characterized, and it is shown that certain design parameters provide a dynamic control, which is critical in many medical applications such as thermal ablation of tumors., Spanish MINECO/FEDER (TEC2015-70939-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Design, modelling, characterization and implementation of acoustic lenses for modulation of ultrasound beams.

  • Tarrazó-Serrano, Daniel|||0000-0001-9986-0884
[ES] La capacidad de controlar y modificar los haces de energía ha sido motivo de investigación por parte de la comunidad científica desde largo tiempo atrás. En el campo de la acústica, este control energético de las ondas mecánicas tiene numerosas aplicaciones. Desde las aplicaciones industriales, alimentarias, farmacéuticas, etcétera hasta la biomedicina. Esta tesis se basa en la aplicación del control y modulación focal de los ultrasonidos para el uso en este último campo. Se puede modular y controlar los focos de ultrasonidos de diferentes formas. En este caso, se han desarrollado lentes planas que utilizan el principio de la difracción para lograr focalizar los haces. Las ventajas del uso de lentes planas de focalización permiten ser implementadas de forma sencilla en procesos de mecanización e incluso mediante impresión 3D. Se propone utilizar transductores planos que al emitir sobre una lente acústica, se produzca una conformación focal de características controladas. La lente conocida como lente de Fresnel (FZP) ha sido escogida como base de diseño en la implementación de las diferentes soluciones que logran cumplir con los objetivos marcados. Mediante la aplicación de modificaciones en una FZP se puede lograr pasar de una lente con capacidades extraordinarias de focalización a una lente capaz de controlar la resolución lateral y la profundidad de foco e incluso mejorar la ganancia. El objetivo final de aplicación es el uso en transductores de ultrasonidos de alta intensidad conocidos como HIFU. Mejorar la capacidad de resolución hace que se puedan desarrollar mejores terapias oncológicas que supongan un índice mayor de éxito en la lucha contra el cáncer. En la presente tesis se ha propuesto, además, una novedosa lente FZP basada en el cambio de fase que puede resultar un antes y un después en aplicaciones biomédicas. Se ha conseguido no solo mejorar la eficiencia de una FZP, sino que se ha conseguido implementar en materiales compatibles con resonancia magnética. Se han desarrollado modelos numéricos basados en el método de los elementos finitos que emulan la física involucrada. Las medidas han sido realizadas en condiciones controladas por un sistema robotizado de alta precisión. Todos los resultados obtenidos y publicados han sido desarrollados de forma numérica y experimental, validándose el método de trabajo y dando consistencia a las soluciones propuestas., [CA] La capacitat de controlar i modificar els feixos d'energia ha sigut motiu d'investigació per part de la comunitat científica des de llarg temps arrere. En el camp de l'acústica, este control energètic de les ones mecàniques té nombroses aplicacions. Des de les aplicacions industrials, alimentàries, farmacèutiques, etcètera fins la biomedicina. Esta tesi es basa en l'aplicació del control i modulació focal dels ultrasons per a l'ús en este últim camp. Es pot modular i controlar els focus d'ultrasons de diferents formes. En este cas, s'han desenvolupat lents planes que utilitzen el principi de la difracció per a aconseguir focalitzar els feixos. Els avantatges de l'ús de lents planes de focalització permeten ser implementades de forma senzilla en processos de mecanització i inclús per mitjà d'impressió 3D. Es proposa utilitzar transductores plans que a l'emetre sobre una lent acústica, es produïsca una conformació focal de característiques controlades. La lent coneguda com a lent de Fresnel (FZP) ha sigut triada com a base de disseny en la implementació de les diferents solucions que aconseguixen complir amb els objectius marcats. Per mitjà de l'aplicació de modificacions en una FZP es pot aconseguir passar d'una lent amb capacitats extraordinàries de focalització a una lent capaç de controlar la resolució lateral i la profunditat de focus i inclús millorar el guany. L'objectiu final d'aplicació és l'ús en transductores d'ultrasons d'alta intensitat coneguts com HIFU. Millorar la capacitat de resolució fa que es puguen desenvolupar millors teràpies oncològiques que suposen un índex major d'èxit en la lluita contra el càncer. En la present tesi s'ha proposat, a més, una nova lent FZP basada en el canvi de fase que pot resultar un abans i un després en aplicacions biomèdiques. S'ha aconseguit no sols millorar l'eficiència d'una FZP, sinó que s'ha aconseguit implementar en materials compatibles amb ressonància magnètica. S'han desenvolupat models numèrics basats en el mètode dels elements finits que emulen la física involucrada. Les mesures han sigut realitzades en condicions controlades per un sistema robotitzat d'alta precisió. Tots els resultats obtinguts i publicats han sigut desenvolupats de forma numèrica i experimental, validant-se el mètode de treball i donant consistència a les solucions proposades., [EN] The ability to control and modify energy beams has been the subject of research by the scientific community for a long time. In the acoustic field, this energetic control of mechanical waves has numerous applications. From industrial, food, pharmaceutical applications, et cetera, to biomedicine. This thesis is based on the ultrasound control and focal modulation applications. It is possible to modulate and control the ultrasound focii in different ways. In this case, flat lenses were developed based on the principle of diffraction to focus the beams. The advantages of using flat focusing lenses allow them to be easily implemented in machining and drilling processes and even through 3D printing. It was proposed to use planar transducers that when emitting on an acoustic lens, controlled characteristics of focal conformation were produced. The lens known as Fresnel Zone Plane (FZP) was chosen as the implementation design basis for the different solutions that manage to fulfill the objectives set. By applying modifications to an FZP it was possible to go from a lens with extraordinary focusing capabilities to a lens that was capable to control lateral resolution, depth of focus and even improving the gain. The final objective application was the use in high intensity ultrasound transducers known as HIFU. Improving the ability to resolve makes it possible to develop better cancer therapies that represent a higher rate of success in the fight against cancer. In the present thesis, a novel FZP lens based on phase change has also been proposed that can be a before and after in biomedical applications. It has not only been possible to improve the efficiency of an FZP, but it has also been possible to implement it in materials compatible with magnetic resonance imaging. Numerical models based on the finite element method were developed for emulating the involved physics. Measurements were carried out under controlled conditions by a high precision robotic system. All the results obtained and published were developed numerically and experimentally, validating the working method and giving consistency to the proposed solutions., I want to acknowledge the following public funding sources that have made possible this research: Grant BES-2016-077133 (Ministerio de Ciencia, Innovación y Universidades de España) Project TEC2015-70939-R (MINECO/FEDER). Tomsk Polytechnic University within the framework of Tomsk Polytechnic University Competitiveness Enhancement Program.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Design of Acoustic Lenses for Ultrasound Focusing Applications

  • Pérez López, Sergio
[ES] La focalización de ultrasonidos tiene muchas aplicaciones en una gran variedad de áreas tanto científicas como industriales. Los ultrasonidos focalizados son una de las herramientas principales usada por médicos en todo el mundo para obtener imágenes biomédicas de diferentes tipos de tejidos y órganos de manera no invasiva. En las últimas décadas, el uso de ultrasonidos focalizados de alta intensidad (HIFU, por sus siglas en inglés) ha surgido como una de las técnicas principales para el tratamiento de cáncer mediante la ablación térmica de tumores de manera no invasiva. Además, los ultrasonidos focalizados están emergiendo en los últimos años como uno de los métodos más prometedores para el tratamiento de las enfermedades cerebrales, con la aparición de nuevas técnicas disruptivas como la apertura reversible de la barrera hematoencefálica o la neuromodulación. En entornos industriales, los ultrasonidos son ampliamente utilizados como uno de los métodos principales para la evaluación no destructiva de materiales y estructuras, debido a que las ondas acústicas pueden penetrar en los objetos a distancias donde la luz no puede debido a la elevada absorción y dispersión. En este sentido, diseñar estructuras capaces de focalizar ultrasonidos es de una gran relevancia tanto para la comunidad científica como para los sectores médicos e industriales. Esta tesis presenta nuevos diseños de lentes acústicas capaces de controlar los parámetros principales del haz de ultrasonidos focalizados, proporcionando diferentes tipos de perfiles de focalización adecuados para una gran variedad de aplicaciones y escenarios. En particular, se han diseñado y adaptado al campo de los ultrasonidos las lentes de Fresnel (Fresnel Zone Plates, FZPs), ampliamente utilizadas en el campo de la óptica. Se ha presentado una nueva técnica de modulación espacio-temporal capaz de controlar la posición del foco de ultrasonidos tanto en espacio como en tiempo, aumentando así la versatilidad de este tipo de dispositivos. También se ha demostrado el funcionamiento en el campo de la acústica de nuevos diseños basados en aplicar secuencias binarias a una lente de Fresnel convencional, como las secuencias fractales de Cantor o las secuencias de M-bonacci generalizadas, capaces de modificar las propiedades de focalización de las lentes, incluyendo el número, posición y forma de los focos acústicos. Además, se introduce un nuevo diseño de lentes esféricas rellenas de líquido capaces de generar jets ultrasónicos, con mucho potencial en aplicaciones de imagen de alta resolución en campo cercano. Se ha demostrado que, cambiando el líquido interno de la lente o ajustando el ratio de mezcla entre dos líquidos, se pueden controlar los parámetros principales del jet. Los diseños propuestos en la tesis han sido validados tanto empleando simulaciones numéricas como realizando medidas experimentales, allanando el camino para el uso de este tipo de estructuras en aplicaciones de focalización de ultrasonidos., [CA] La focalització d'ultrasons té moltes aplicacions en moltes àrees científiques i industrials. Els ultrasons focalitzats són una de les eines principals utilitzada per metges a tot el món per obtenir imatges biomèdiques de diferents tipus de teixits i òrgans de manera no invasiva. En les últimes dècades, els ultrasons focalitzats d'alta intensitat (HIFU, per les seues sigles en anglès) han aparegut com una de les tècniques principals per al tractament de càncer mitjançant l'ablació de tumors de manera no invasiva. A més, els ultrasons focalitzats estan emergint en els últims anys com un dels mètodes més prometedors per al tractament de les malalties cerebrals, amb l'aparició de noves tècniques disruptives com l'obertura reversible de la barrera hematoencefàlica o la neuromodulació. En entorns industrials, els ultrasons són àmpliament utilitzats com un dels mètodes principals per a l'avaluació no destructiva de materials i estructures, pel fet que les ones acústiques poden penetrar en els objectes a distàncies on la llum no pot a causa de l'elevada absorció i dispersió. En aquest sentit, dissenyar estructures capaces de focalitzar ultrasons és d'una gran rellevància tant per a la comunitat científica com per als sectors mèdics i industrials. Aquesta tesi presenta nous dissenys de lents acústiques capaços de controlar els paràmetres principals del feix d'ultrasons focalitzats, proporcionant diferents tipus de perfils de focalització adequats per a una gran varietat d'aplicacions i escenaris. En particular, s'han dissenyat i adaptat al camp dels ultrasons les lents de Fresnel (Fresnel Zone Plates, FZPs), àmpliament utilitzades en el camp de l'òptica. S'ha presentat una nova tècnica de modulació espai-temporal capaç de controlar la posició del focus d'ultrasons tant en espai com en temps, augmentant així la versatilitat d'aquest tipus de dispositius. També s'ha demostrat el funcionament en el camp de l'acústica de nous dissenys basats en aplicar seqüències binàries a una lent de Fresnel convencional, com les seqüències fractals de Cantor o les seqüències de M-bonacci generalitzades, capaces de modificar les propietats de focalització de les lents, incloent el nombre, posició i forma dels focus acústics. A més, s'introdueix un nou disseny de lents esfèriques plenes de líquid capaces de generar jets ultrasònics, amb molt potencial en aplicacions d'imatge d'alta resolució en camp proper. S'ha demostrat que, canviant el líquid intern de la lent o ajustant la ràtio de barreja entre dos líquids, es poden controlar els paràmetres principals del jet. Els dissenys proposats en la tesi han estat validats tant emprant simulacions numèriques com realitzant mesures experimentals, aplanant el camí per a l'ús d'aquest tipus d'estructures en aplicacions de focalització d'ultrasons., [EN] Ultrasound focusing has many applications in a wide range of fields. Focused ultrasound is one of the main tools used by doctors all over the world to obtain biomedical images of different kind of tissues non-invasively. In the past decades, high intensity focused ultrasound (HIFU) appeared as one of the fundamental techniques for cancer treatment through non-invasive thermal tumor ablation. In addition, focused ultrasonic waves are recently emerging as one of the main tools to treat brain diseases, with novel disruptive techniques such as blood-brain barrier opening or neuromodulation. In industrial environments, ultrasonic waves are widely employed as one of the primary methods for the non-destructive evaluation (NDE) of materials and structures, as acoustic waves are able to penetrate deep into objects otherwise opaque using optical techniques. In this sense, designing structures capable of focusing ultrasonic waves is of great interest and relevance for the scientific, the industrial, and the biomedical sectors. This thesis devises new designs of acoustic lenses capable of controlling the main parameters of the focused ultrasound beam, achieving different kinds of focusing profiles suitable for a wide variety of scenarios. In particular, Fresnel Zone Plates (FZPs), commonly used in optics, are designed and adapted to the ultrasound domain. A novel spatio-temporal modulation technique capable of controlling the ultrasound focus location in both time and space is presented, increasing the versatility of this kind of devices. New design techniques based on applying a binary sequence to FZPs are also demonstrated, such as Cantor fractal sequences or generalized M-bonacci sequences, which modify the focusing properties of the lens, including the number, location, and shape of the different acoustic foci. In addition, acoustic jets generated by liquid-filled spherical lenses are devised for near-field high resolution imaging, demonstrating their applicability in the ultrasound domain. It is demonstrated that, by changing the inner liquid of the spherical lens or by tuning the mixing ratio between two liquids, the main focal parameters of the ultrasonic jet can be accurately controlled. The proposed designs are validated using both numerical simulations and experimental measurements, paving the way for the use of these kind of structures in focused ultrasound applications., This work would not have been possible without the following funding sources: PAID-01-18 personal FPI grant from Universitat Politècnica de València; Spanish government MINECO TEC2015-70939-R project; Spanish government MICINN RTI2018-100792-B-I00 project; Generalitat Valenciana AICO/2020/139 project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Liquid-liquid core-shell configurable mesoscale spherical acoustic lens with subwavelength focusing

  • Pérez-López, Sergio
  • Minin, Oleg V.
  • Minin, Igor V.
  • Candelas Valiente, Pilar|||0000-0002-9924-7673
  • Fuster Escuder, José Miguel|||0000-0001-7778-8834
  • Rubio Michavila, Constanza|||0000-0002-4395-7473
[EN] In this work, we present a lens based on a thin hollow ABS spherical container structure, which can be filled up with different compatible liquids. The acoustic jet can be dynamically shaped by either shifting the operating frequency or modifying the geometry of the lens. We show for the first time that a spherical Ethanol ABS core¿shell acoustical lens immersed in water with low diameter-to-wavelength ratio equal to 6.67 and refraction index of 1.24 achieves a focusing spot narrower than 0.85¿. Experimental measurements validate simulation results and demonstrate the viability of these configurable spherical lenses in underwater acoustic focusing applications., This work has been supported by Spanish MINECO TEC2015-70939-R and MICINN RTI2018-100792-B-I00 projects. S.P.-L. acknowledges financial support from Universitat Politècnica de València grant program PAID-01-18. I.V.M. and O.V.M. acknowledge the Tomsk Polytechnic University Competitiveness Enhancement Program.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Observation of ultrasonic Talbot effect in perforated plates

  • Candelas Valiente, Pilar|||0000-0002-9924-7673
  • Fuster Escuder, José Miguel|||0000-0001-7778-8834
  • Uris Martínez, Antonio|||0000-0002-2005-2305
  • Rubio Michavila, Constanza|||0000-0002-4395-7473
  • Pérez-López, Sergio
[EN] The Talbot effect using ultrasonic waves transmitted through a periodic perforated plate is presented. The ultrasonic wave-field at the exit of the perforated plate replicates the perforated pattern at the Talbot distance. Experimental results are validated by an analytical model. The measured propagating wave-field is consistent with the analytical results. The influence of the grating size and the filling fraction on the Talbot effect are also studied, and it is found that both parameters affect the formation of Talbot images., This work was financially supported by the Spanish MINECO through project TEC2015-70939R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Pinhole Zone Plate Lens for Ultrasound Focusing

  • Rubio Michavila, Constanza|||0000-0002-4395-7473
  • Fuster Escuder, José Miguel|||0000-0001-7778-8834
  • Castiñeira-Ibáñez, Sergio|||0000-0001-6414-3906
  • Uris Martínez, Antonio|||0000-0002-2005-2305
  • Belmar Ibáñez, Francisco|||0000-0003-4412-0007
  • Candelas Valiente, Pilar|||0000-0002-9924-7673
[EN] The focusing capabilities of a pinhole zone plate lens are presented and compared with those of a conventional Fresnel zone plate lens. The focusing properties are examined both experimentally and numerically. The results confirm that a pinhole zone plate lens can be an alternative to a Fresnel lens. A smooth filtering effect is created in pinhole zone plate lenses, giving rise to a reduction of the side lobes around the principal focus associated with the conventional Fresnel zone plate lens. The manufacturing technique of the pinhole zone plate lens allows the designing and constructing of lenses for different focal lengths quickly and economically and without the need to drill new plates., This work has been supported by Spanish MINECO (TEC2015-70939-R)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Phase Method for Visualization of Hidden Dielectric Objects in the MillimeterWaveband

  • Minin, Igor V.
  • Minin, Oleg V.
  • Castiñeira-Ibáñez, Sergio|||0000-0001-6414-3906
  • Rubio Michavila, Constanza|||0000-0002-4395-7473
  • Candelas Valiente, Pilar|||0000-0002-9924-7673
[EN] A method of detecting dielectric objects hidden behind an opaque barrier located on a reflective background, based on the distortion of interference fringes, is proposed in this article. Experiments conducted in the millimeter wavelength range demonstrated the effectiveness of the method under consideration, which does not require a holographic image reconstruction. Such a system can be classified as contour imaging., This research was funded by Ministerio de Economía y Competitividad (MINECO), grant number RTI 2018-I00792-B-100
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Manipulation of focal patterns in acoustic Soret type zone plate lens by using reference radius/phase effect

  • Tarrazó-Serrano, Daniel|||0000-0001-9986-0884
  • Rubio Michavila, Constanza|||0000-0002-4395-7473
  • Candelas Valiente, Pilar|||0000-0002-9924-7673
  • Minin, Igor V.
  • Minin, Oleg V.
[EN] The manipulation of focal patterns of acoustic underwater Soret Zone Plate lens in far fields, such as manipulation (optimization) of Sidelobe Level and the design of long depth of focus by selecting the simple free parameter called reference radius (phase) has been demonstrated. Two effects have been studied by means of numerical simulations. Regarding the first effect, simulations demonstrate diffraction limited focal spot (0.47 wavelength) and 3 dB reduction of the first Side Lobe Level using Soret ZP with an optimal reference radius and without causing neither main lobe broadening or gain reduction. In the second effect, by using numerical simulations an increasing of depth of focus, more than 2 times, in comparison with classical Soret ZP with high numerical aperture (F/D=2.5), was observed., This work has been supported by TEC2015-70939-R (MINECO/FEDER).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

On the focusing enhancement of Soret zone plates with ultrasound directional transducers

  • Pérez-López, Sergio
  • Fuster Escuder, José Miguel|||0000-0001-7778-8834
  • Candelas Valiente, Pilar|||0000-0002-9924-7673
  • Rubio Michavila, Constanza|||0000-0002-4395-7473
[EN] This work analyzes the influence of the distribution of transparent Fresnel regions over the focusing profile of Soret Zone Plates. It is shown that this effect becomes very significant in those fields where directional transducers are employed, such as microwaves or acoustics. A thorough analysis on both the lens transmission efficiency and the focusing enhancement factor is presented. Moreover, experimental measurements are also carried out, validating the theoretical model and demonstrating that the distribution of transparent Fresnel regions becomes a critical parameter in applications requiring directional emitters., This work was supported by Spanish MINECO TEC2015-70939-R and MICINN RTI2018-100792-B-I00 projects. S.P.-L. acknowledges financial support from Universitat Politecnica de Valencia Grant Program No. PAID-01-18.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Acoustic Focusing Enhancement In Fresnel Zone Plate Lenses

  • Tarrazó-Serrano, Daniel|||0000-0001-9986-0884
  • Candelas Valiente, Pilar|||0000-0002-9924-7673
  • Uris Martínez, Antonio|||0000-0002-2005-2305
  • Rubio Michavila, Constanza|||0000-0002-4395-7473
  • Pérez-López, Sergio
[EN] The development of flat acoustic lenses for different applications such as biomedical engineering is a topic of great interest. Flat lenses like Fresnel Zone Plates (FZPs) are capable of focusing energy beams without the need of concave or convex geometries, which are more difficult to manufacture. One of the possible applications of these type of lenses is tumor ablation through High Intensity Focused Ultrasound (HIFU) therapies with real time Magnetic Resonance Imaging (MRI) monitoring. In order to be MRI compatible, the FZP material cannot have electromagnetic interaction. In this work, a Phase-Reversal FZP (PR-FZP) made of Polylactic Acid (PLA) manufactured with a commercial 3D printer is proposed as a better, more efficient and MRI compatible alternative to conventional Soret FZPs. Phase-Reversal lenses, unlike traditional FZPs, take advantage of all the incident energy by adding phase compensation regions instead of pressure blocking regions. The manufactured PR-FZP achieves 21.9 dB of focal gain, which increases the gain compared to a Soret FZP of its same size by a factor of 4.0 dB. Both numerical and experimental results are presented, demonstrating the improved focusing capabilities of these types of lenses., This work has been supported by Spanish MINECO (TEC2015-70939-R). S.P.-L. acknowledges financial support from Universitat Politècnica de València through grant program PAID-01-18.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Fractal lenses based on Cantor binary sequences for ultrasound focusing applications

  • Pérez-López, Sergio
  • Fuster Escuder, José Miguel|||0000-0001-7778-8834
  • Candelas Valiente, Pilar|||0000-0002-9924-7673
  • Rubio Michavila, Constanza|||0000-0002-4395-7473
[EN] In this work, we demonstrate the application of Cantor fractal lenses in acoustics. The Cantor Zone Plate (CZP), previously introduced in optics, is designed from a conventional Fresnel Zone Plate (FZP) using a binary sequence governed by the distribution of a generalized Cantor set. The CZP maintains its main focus at the same focal distance than its associated FZP, providing a softer multi-foci focusing profile which is very useful in certain ultrasound therapeutic applications. Experimental measurements are in good agreement with the theoretical model, demonstrating that CZPs are suitable for the ultrasound field., This work has been supported by Spanish MINECO (TEC2015-70939-R), MICINN (RTI2018-100792-B-I00) and by Universitat Politecnica de Valencia research grant program PAID-01-18.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Analysis of Fresnel Zone Plates Focusing Dependence on Operating Frequency

  • Fuster Escuder, José Miguel|||0000-0001-7778-8834
  • Candelas Valiente, Pilar|||0000-0002-9924-7673
  • Castiñeira-Ibáñez, Sergio|||0000-0001-6414-3906
  • Rubio Michavila, Constanza|||0000-0002-4395-7473
  • Pérez López, Sergio
[EN] The focusing properties of Fresnel Zone Plates (FZPs) against frequency are analyzed in this work. It is shown that the FZP focal length depends almost linearly on the operating frequency. Focal depth and focal distortion are also considered, establishing a limit on the frequency span at which the operating frequency can be shifted. An underwater FZP ultrasound focusing system is demonstrated, and experimental results agree with the theoretical analysis and simulations., Spanish MINECO (TEC2015-70939-R) supported this work.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Tunable depth of focus of acoustical pupil masked Soret Zone Plate

  • Castiñeira-Ibáñez, Sergio|||0000-0001-6414-3906
  • Tarrazó-Serrano, Daniel|||0000-0001-9986-0884
  • Rubio Michavila, Constanza|||0000-0002-4395-7473
  • Minin, Igor V.
  • Minin, Oleg V.
[EN] In acoustical lenses both resolution and depth of focus are determined by diffraction and the smaller the lens aperture the worse the resolution and the greater the depth of focus. Diffraction-limited resolution has a Soret Zone Plate, but a long depth of focus has an axicon. Nevertheless, these are two different devices each of which requires its own independent design. In this paper, we have shown that the transition from focusing to a diffraction limited spot to a quasi-diffraction free beam can be realized in the same focusing device without changing its topology. It has been shown that using a classical planar Soret Zone Plate lens made of a concentric array of circular aperiodical rings with an amplitude pupil mask placed closely to the surface of lens allows to form a quasi-Bessel beams under specific conditions, part of a diffracted wave collimates, producing an elongated focus. Experiments are performed in water tanks in order to verify the simulation results. Experimental verification shown that the depth of focus of a pupil-masked Soret Zone Plate increases 1.63 times and resolution increases 1.2 times (with minimal beam waist about of 0.67 of wavelength and depth of focus about 5.72 of wavelength). By dynamically controlling the size of the amplitude pupil mask, it is possible to quickly control the depth of focus of an acoustic lens., This work has been supported by Spanish MINECO (TEC2015-70939-R) and was partially supported by Tomsk Polytechnic University Competitiveness Enhancement Program.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enhancement of pupil-masked wavelength-scale gas-filled flat acoustic lens based on anomaly apodization effect

  • Rubio Michavila, Constanza|||0000-0002-4395-7473
  • Tarrazó-Serrano, Daniel|||0000-0001-9986-0884
  • Uris Martínez, Antonio|||0000-0002-2005-2305
  • Minin, Igor V.
  • Minin, Oleg V.
[EN] In this letter, the improvement in focus by the use of a pupil mask produced in an acoustic mesoscale cuboid particle ¿lled with CO2 is reported. Thereby, the result shows that the pupil mask increases the sound intensity and also increases the resolution (or a reduction of the full width at half maximum, FWHM) in focus compared to the non-masked one. These results are important because they con¿rm the effect of abnormal amplitude apodization for a one-wavelength dimension acoustic lens and demonstrate that it is possible to improve sound focusing of a cuboid gas-¿lled lens with one wavelength dimension. This is the smallest size of an acoustic lens ever considered in this type of literature, with side dimensions of the cube equal to one wavelength and a diameter to focus ratio of 2.5, the sound ampli¿cation in focus is 5.4 dB at 4125 Hz, with the resolution near to the diffraction limit., This work has been supported by TEC2015-70939-R (MINECO/FEDER). The research was partially supported by Tomsk Polytechnic University Competitiveness Enhancement Program.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental Ultrasound Transmission through Fluid-Solid and Air-Solid Phononic Plates

  • Gómez Lozano, Vicente|||0000-0002-4564-8287
  • Rubio Michavila, Constanza|||0000-0002-4395-7473
  • Candelas Valiente, Pilar|||0000-0002-9924-7673
  • Uris Martínez, Antonio|||0000-0002-2005-2305
  • Belmar Ibáñez, Francisco|||0000-0003-4412-0007
[EN] Underwater ultrasonic transmissions for fluid-solid and air-solid phononic brass plates are reported in this work. Although the structure is roughly the same, experimental results show very different behaviour between fluid-solid and air-solid phononic plates, due to most of the properties of the fluid-solid perforated plates rely on Fabry-Perot resonances,Wood anomalies and Lamb modes. In air-solid phononic plates Fabry-Perot resonance is highly attenuated due to impedances difference between air and water, and therefore some transmission modes are now distinguishable due to surface modes coupling., This work has been supported by Spanish MINECO (TEC2015-70939-R) and Generalitat Valenciana (AICO/2015/119).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Numerical simulation and laboratory measurements on the influence of fractal dimension on the acoustic beam modulation of a Polyadic Cantor Fractal lenses

  • Tarrazó-Serrano, Daniel|||0000-0001-9986-0884
  • Castiñeira-Ibáñez, Sergio|||0000-0001-6414-3906
  • Candelas Valiente, Pilar|||0000-0002-9924-7673
  • Fuster Escuder, José Miguel|||0000-0001-7778-8834
  • Rubio Michavila, Constanza|||0000-0002-4395-7473
[EN] The possibility of modulating the ultrasound beam produced by a transducer through lenses has become an important task. The fact that these lenses are flat, facilitates their design, construction and applications. If, in addition, the design itself incorporates geometries that affect differently the foci profile on the axial axis of the lens, improvements become more significant. In this work the design of a flat lens based on a Polyadic Cantor fractal geometries is presented. The influence of the so-called fractal dimension on the modulation of the ultrasonic beam to obtain the foci is analysed. In this paper, experimental results under controlled conditions are presented. The numerical solutions obtained have been validated., Investigation supported by the Ministry of Economy, Industry and Competitiveness, and the European Regional Development Fund TEC2015-70939-R (MINECO/FEDER).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Tunable subwavelength ultrasound focusing in mesoscale spherical lenses using liquid mixtures

  • Pérez-López, Sergio
  • Minin, Igor V.
  • Minin, Oleg V.
  • Fuster Escuder, José Miguel|||0000-0001-7778-8834
  • Candelas Valiente, Pilar|||0000-0002-9924-7673
[EN] In this work, we present a configurable spherical lens for underwater focusing applications, which consists on a hollow ABS container filled with a liquid mixture. Two miscible liquids with different sound speeds are required to implement this novel configurable lens. We show that by adjusting the mixing ratio between the volumes of both liquids, the sound speed of the liquid mixture can be accurately selected. This results in a modification of the acoustic jet properties and a continuous tuning on the lens focal length. This procedure can be fully automatized providing a dynamic control mechanism that can shift the lens focal length to any desired value inside a continuous range in both directions. Depending on the acoustic properties of the selected liquids, subwavelength resolution or even beyond the diffraction limit resolution can be achieved. We provide experimental measurements for ethanol-water mixtures achieving subwavelength resolution for a certain focal length ranging between 34.6 and 42.8 mm., This work has been supported by Spanish MINECO TEC2015-70939-R and MICINN RTI2018-100792-B-I00 projects. S.P.-L. acknowledges financial support from Universitat Politecnica de Valencia grant program PAID01-18. I.V.M. and O.V.M. acknowledge support from the Tomsk Polytechnic University Enhancement Program.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Design of Acoustical Bessel-Like Beam Formation by a Pupil Masked Soret Zone Plate Lens

  • Tarrazó-Serrano, Daniel|||0000-0001-9986-0884
  • Castiñeira-Ibáñez, Sergio|||0000-0001-6414-3906
  • Candelas Valiente, Pilar|||0000-0002-9924-7673
  • Rubio Michavila, Constanza|||0000-0002-4395-7473
  • Minin, Oleg V.
  • Minin, Igor V.
[EN] The image performance of acoustic and ultrasound sensors depends on several fundamental parameters such as depth of focus or lateral resolution. There are currently two different types of acoustic diffractive lenses: those that form a diffraction-limited spot with a shallow depth of focus (zone plates) and lenses that form an extended focus (quasi-Bessel beams). In this paper, we investigate a pupil-masked Soret zone plate, which allows the tunability of a normalized angular spectrum. It is shown that the depth of focus and the lateral resolution can be modified, without changing the lens structure, by choosing the size of the pupil mask. This effect is based on the transformation of spherically-converging waves into quasi-conical waves, due to the apodization of the central part of the zone plate. The theoretical analysis is verified with both numerical simulations and experimental measurements. A Soret zone plate immersed in water with D/2F = 2.5 and F = 4.5l changes its depth of focus from 2.84l to 5.9l and the lateral resolution increases from 0.81l to 0.64l at a frequency of 250 kHz, by modifying the pupil mask dimensions of the Soret zone plate., This work has been supported by the Spanish MINECO (TEC2015-70939-R) and was partially supported by the Tomsk Polytechnic University Competitiveness Enhancement Program.