Pasar al contenido principal

CATALYTIC CONVERSION OF HYDROCARBONS INTO HIGH VALUE-ADDED PRODUCTS

RYC-2013-12494

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i
Subprograma Subprograma Estatal de Incorporación
Convocatoria Ramón y Cajal
Año convocatoria 2013
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced reduction of few-layer graphene oxide via supercritical water gasification of glycerol

  • Torres Gamarra, Daniel
  • Arcelus-Arrillaga, Pedro
  • Millan, Marcos
  • Pinilla Ibarz, José Luis
  • Suelves Laiglesia, Isabel
A sustainable and effective method for de-oxygenation of few-layer graphene oxide (FLGO) by glycerol gasification in supercritical water (SCW) is described. In this manner, reduction of FLGO and valorization of glycerol, in turn catalyzed by FLGO, are achieved simultaneously. The addition of glycerol enhanced FLGO oxygen removal by up to 59% due to the in situ hydrogen generation as compared to the use of SCW only. Physicochemical characterization of the reduced FLGO (rFLGO) showed a high restoration of the sp2-conjugated carbon network. FLGO sheets with a starting C/O ratio of 2.5 are reduced by SCW gasification of glycerol to rFLGO with a C/O ratio of 28.2, above those reported for hydrazine-based methods. Additionally, simultaneous glycerol gasification resulted in the concurrent production of H2, CO, CH4 and valuable hydrocarbons such as alkylated and non-alkylated long chain hydrocarbon (C12–C31), polycyclic aromatic hydrocarbons (PAH), and phthalate, phenol, cresol and furan based compounds., This work was funded by FEDER and the Spanish Economy and Competitiveness Ministry (MINECO) (ENE2011-28318-C03-01 and ENE2014-52189-C02-01-R). D.T. thanks for the award of his under the frame of ENE2011-28318-C03-01 project. J.L.P. thanks MINECO for his Ramon y Cajal research contract (RYC-2013-12494). Authors acknowledge the “Laboratorio deMicroscopías Avanzadas” at “Instituto de Nanociencia de Aragón—Universidad de Zaragoza” for offering access to their instruments and expertise., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Co-, Cu- and Fe-doped Ni/Al2O3 catalysts for the catalytic decomposition of methane into hydrogen and carbon nanofibers

  • Torres Gamarra, Daniel
  • Pinilla Ibarz, José Luis
  • Suelves Laiglesia, Isabel
The catalytic decomposition of methane (CDM) process produces hydrogen in a single stage and avoids CO2 emission thanks to the formation of high added value carbon nanofilaments as a by-product. In this work, Ni monometallic and Ni–Co, Ni–Cu, and Ni–Fe bimetallic catalysts are tested in the CDM reaction for the obtention of fishbone carbon nanofibers (CNF). Catalysts, in which Al2O3 is used as textural promoter in their formulation, are based on Ni as main active phase for the carbon formation and on Co, Cu, or Fe as dopants in order to obtain alloys with improved catalytic behaviour. Characterization of bimetallic catalysts showed the formation of particles of Ni alloys with a bimodal size distribution. For the doping content studied (5 mol. %), only Cu formed an alloy with a lattice constant high enough to be able to favor the carbon diffusion through the catalytic particle against surface diffusion, resulting in higher carbon formations, longer activity times, and activity at 750 ◦C; whereas Ni, Ni–Co, and Ni–Fe catalysts were inactive. On the other hand, Fe also improved the undoped catalyst performance presenting a higher carbon formation at 700 ◦C and the obtention of narrow carbon nanofilaments from active Ni3Fe crystallites., This work was funded by FEDER and the Spanish Economy and Competitiveness Ministry (MINECO) (ENE2014-52189-C02-01-R). DT thanks for the award of his PhD under the frame of the ENE2011-28318-C03-01 project. JLP thanks MINECO for his Ramon y Cajal research contract (RYC-2013-12494). The microscopy works have been conducted in the “Laboratorio de Microscopías Avanzadas” at “Instituto de Nanociencia de Aragón—Universidad de Zaragoza”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Liquid-phase hydrodeoxygenation of guaiacol over Mo2C supported on commercial CNF. Effects of operating conditions on conversion and product selectivity

  • Moreira, Rui
  • Ochoa, Elba
  • Pinilla Ibarz, José Luis
  • Portugal, António
  • Suelves Laiglesia, Isabel
2 Tablas,7 Figuras, 14 Páginas., In this work, a Mo2C catalyst that was supported on commercial carbon nanofibers (CNF) was synthetized and tested in the hydrodeoxygenation (HDO) of guaiacol. The effects of operating conditions (temperature and pressure) and reaction time (2 and 4 h) on the conversion of guaiacol and products selectivity were studied. The major reaction products were cresol and phenol, followed by xylenols and toluene. The use of more severe operating conditions during the HDO of guaiacol caused a diversification in the reaction pathways, and consequently in the selectivity to products. The formation of phenol may have occurred by demethylation of guaiacol, followed by dehydroxylation of catechol, together with other reaction pathways, including direct guaiacol demethoxylation, and demethylation of cresols. X-ray diffraction (XRD) analysis of spent catalysts did not reveal any significant changes as compared to the fresh catalyst., This work was funded by FEDER and the Spanish Economy and Competitiveness Ministry (MINECO) (ENE2014-52189-C02-01-R and ENE2017-83854-R). Elba Ochoa thanks for the award of her PhD under the frame of this project. J.L.P. thanks MINECO for his Ramon y Cajal research contract (RYC-2013-12494). Rui Moreira is extremely grateful to ICB-CSIC for partially financing living costs during his short term mission., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of carburization time on the activity of Mo2C/CNF catalysts for the HDO of guaiacol

  • Ochoa, Elba
  • Torres Gamarra, Daniel
  • Pinilla Ibarz, José Luis
  • Suelves Laiglesia, Isabel
6 Figuras, 3 Tablas.-- Documentación suplementaria disponible en línea en la página web del editor.-- © 2019. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Carbon nanofiber (CNF) supported β-Mo2C-based catalysts were synthetized by carbothermal hydrogen reduction at 750 °C for different times (1, 2, 4, 6 and 18 h) in order to study both the carbide phase formation and the CNF stability during this key stage. Catalysts were characterized by N2 physisorption, X-ray diffraction (XRD), X-ray photoelectron spectroscopy, inductively coupled plasma optical emission spectrometry and scanning transmission electron microscopy. Subsequently, catalysts were evaluated in the hydrodeoxygenation (HDO) of guaiacol using a batch autoclave reactor at mild conditions of temperature and pressure (300 °C and 20 bar of H2). Liquid products were analysed after 2 h of reaction by gas chromatography. In all cases, β-Mo2C phase was formed during the carburization, and crystal sizes increased (from 6 to 18 nm as measured by XRD) as the carburization time did. However, a deep gasification of the support was observed in catalysts carburized above 6 h, resulting in a dramatic loss of specific surface area. In the guaiacol HDO reaction, higher conversions (72–80 %) and HDO ratios (53–63 %) were obtained using catalysts carburized for 2 h and onwards. Considering the carbide content in the catalyst, 1 and 2 h carburized catalysts exhibited the highest values of formation of HDO products: phenol, cyclohexane + benzene and anisole. Besides this, a clear relationship between the Mo2C surface area (SMo2C) and the product formation rate could be inferred for the catalysts carburized at 1, 2 and 4 h, in which the textural properties were not affected by the carburization time. On the other hand, longer carburization times had a worse performance despite the largest values of SMo2C, being this fact related to the dramatic loss of the catalyst textural properties., The authors were grateful for the financial support by FEDER and the Spanish Economy and Competitiveness Ministry (MINECO) (ENE2014-52189-C02-01-R and ENE2017-83854-R). EO acknowledges MINECO for her PhD grant under the frame of the aforementioned project. JLP thanks MINECO for his Ramon y Cajal research contract (RYC-2013-12494)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Performance and stability of counter electrodes based on reduced few-layer graphene oxide sheets and reduced graphene oxide quantum dots for dye-sensitized solar cells

  • Torres Gamarra, Daniel
  • Sebastián del Río, David
  • Lázaro Elorri, María Jesús
  • Pinilla Ibarz, José Luis
  • Suelves Laiglesia, Isabel
  • Aricò, Antonino Salvatore
  • Baglio, Vincenzo
9 Figuras, 4 Tablas.-- Material suplementario disponible en línea en la web del editor.-- © 2019. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Graphene-based materials represent an attractive alternative to platinum in dye-sensitized solar cells (DSSC) counter electrodes to contribute to an efficient conversion of solar energy into electricity. Despite the slower kinetics of carbon for the reduction of triiodide compared to platinum, they are characterized by low cost and promising stability. In this work, two different materials are investigated: reduced few-layer graphene oxide (rFLGO) and reduced graphene oxide quantum dots (rGOQD). The electrochemical performance of DSSC assembled with either rFLGO or rGOQD at the counter electrode is correlated to their most important physico-chemical features. The domain size of graphene sheets had an important effect on the performance at the counter electrode, with quantum dots performing 13% higher efficiency than rFLGO, correlated with a higher density of active sites. Both graphene nanostructures exhibited a better stability behavior upon electrochemical cycling and seasoning of the cells as compared to Pt counter electrode., ICB-CSIC authors acknowledge the Raw Materials Network of Infrastructure “ITO substitution in opto-electronic devices” (European Union), and the funding of the FEDER and the Spanish Science, Innovation and Universities Ministry (MICINN) (ENE2011-28318-C03-01 and ENE2014-52189-C02-01-R). JLP and DS thank MICINN for their Ramón y Cajal research contracts (RyC-2013-12494 and RyC-2016-20944)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Carbon nanofiber supported Mo2C catalysts for hydrodeoxygenation of guaiacol: The importance of the carburization process

  • Ochoa, Elba
  • Torres Gamarra, Daniel
  • Moreira, Rui
  • Pinilla Ibarz, José Luis
  • Suelves Laiglesia, Isabel
13 Figuras, 4 Tablas.-- Material suplementario disponible en línea en la web del editor.-- © 2018. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Molybdenum carbide catalysts supported on carbon nanofibers (β-Mo2C/CNF) were synthetized employing different carburization parameters: five temperatures (550–750 °C) and four heating rates (1–10 °C/min) were tested. The carburization process of the Mo precursor in the catalysts was studied by thermogravimetric analysis, X-ray diffraction, X-ray photoelectron spectroscopy, N2 physisorption, inductively coupled plasma optical emission spectrometry and transmission electron microscopy. The formation of the carbide phase was confirmed by the presence of the oxycarbide and carbide phases which were observed on the surface of all catalysts. Higher carburization temperatures resulted in an increase of the carbide phase content and crystal size at the expenses of the oxycarbide phase disappearance. High carburization temperatures and low heating rates were needed in order to obtain well-defined β-Mo2C crystals over the catalysts, which involved a substantial improvement of their catalytic activity in the hydrodeoxygenation of guaiacol., This work was funded by FEDER and the Spanish Economy and Competitiveness Ministry (MINECO) (ENE2014-52189-C02-01-R and ENE2017-83854-R). EO thanks for the award of her PhD under the frame of the aforementioned project. JLP thanks MINECO for his Ramon y Cajal research contract (RYC-2013-12494). The microscopy works have been conducted in the “Laboratorio de Microscopías Avanzadas” at “Instituto de Nanociencia de Aragón - Universidad de Zaragoza”. Authors acknowledge the LMA-INA for offering access to their instruments and expertise. RM is extremely grateful to ICB for partially financing his short term mission at the institution., Peer reviewed