Pasar al contenido principal

Advanced catalysts for efficient and cost-effective fuel cells and batteries

RYC-2016-20944

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i
Subprograma Subprograma Estatal de Incorporación
Convocatoria Ramón y Cajal
Año convocatoria 2016
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Methanol-tolerant M-N-C catalysts for oxygen reduction reactions in acidic media and their application in direct methanol fuel cells

  • Lo Vecchio, Carmelo
  • Sebastián del Río, David
  • Lázaro Elorri, María Jesús
  • Aricò, Antonino Salvatore
  • Baglio, Vincenzo
Direct methanol fuel cells (DMFCs) are emerging technologies for the electrochemical conversion of the chemical energy of a fuel (methanol) directly into electrical energy, with a low environmental impact and high efficiency. Yet, before this technology can reach a large-scale diffusion, specific issues must be solved, in particular, the high cost of the cell components. In a direct methanol fuel cell system, high capital costs are mainly derived from the use of noble metal catalysts; therefore, the development of low-cost electro-catalysts, satisfying the target requirements of high performance and durability, represents an important challenge. The research is currently addressed to the development of metal–nitrogen–carbon (M–N–C) materials as cheap and sustainable catalysts for the oxygen reduction reaction (ORR) in an acid environment, for application in polymer electrolyte fuel cells fueled by hydrogen or alcohol. In particular, this mini-review summarizes the recent advancements achieved in DMFCs using M–N–C catalysts. The presented analysis is restricted to M–N–C catalysts mounted at the cathode of a DMFC or investigated in rotating disk electrode (RDE) configuration for the ORR in the presence of methanol in order to study alcohol tolerance. The main synthetic routes and characteristics of the catalysts are also presented., D.S. acknowledges the Spanish Ministry of Science, Innovation, and University (MICINN) for his Ramón y Cajal research contract (RyC-2016-20944)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Performance and stability of counter electrodes based on reduced few-layer graphene oxide sheets and reduced graphene oxide quantum dots for dye-sensitized solar cells

  • Torres Gamarra, Daniel
  • Sebastián del Río, David
  • Lázaro Elorri, María Jesús
  • Pinilla Ibarz, José Luis
  • Suelves Laiglesia, Isabel
  • Aricò, Antonino Salvatore
  • Baglio, Vincenzo
9 Figuras, 4 Tablas.-- Material suplementario disponible en línea en la web del editor.-- © 2019. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Graphene-based materials represent an attractive alternative to platinum in dye-sensitized solar cells (DSSC) counter electrodes to contribute to an efficient conversion of solar energy into electricity. Despite the slower kinetics of carbon for the reduction of triiodide compared to platinum, they are characterized by low cost and promising stability. In this work, two different materials are investigated: reduced few-layer graphene oxide (rFLGO) and reduced graphene oxide quantum dots (rGOQD). The electrochemical performance of DSSC assembled with either rFLGO or rGOQD at the counter electrode is correlated to their most important physico-chemical features. The domain size of graphene sheets had an important effect on the performance at the counter electrode, with quantum dots performing 13% higher efficiency than rFLGO, correlated with a higher density of active sites. Both graphene nanostructures exhibited a better stability behavior upon electrochemical cycling and seasoning of the cells as compared to Pt counter electrode., ICB-CSIC authors acknowledge the Raw Materials Network of Infrastructure “ITO substitution in opto-electronic devices” (European Union), and the funding of the FEDER and the Spanish Science, Innovation and Universities Ministry (MICINN) (ENE2011-28318-C03-01 and ENE2014-52189-C02-01-R). JLP and DS thank MICINN for their Ramón y Cajal research contracts (RyC-2013-12494 and RyC-2016-20944)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrochemical oxidation of ordered mesoporous carbons and the influence of graphitization

  • Pérez Rodríguez, Sara
  • Sebastián del Río, David
  • Lázaro Elorri, María Jesús
6 Figuras.- 4 Tablas.- Datos suplementarios disponibles en línea en la página web del editor., Ordered mesoporous carbon materials (OMC), obtained by the template carbonization pathway from silica templates (sacrificial method), exhibit promising features for many applications mainly due to their large surface area. Graphitization is a common approach to improve the electrical conductivity and degradation resistance. We have investigated the graphitization of two different OMC at 1500 °C and the electrochemical oxidation by potential holding at 1.4 V vs. reversible hydrogen electrode (RHE) in acidic electrolyte. Graphitization conducts to a significant reduction of the electrooxidation associated charge, between 50 and 90% depending on the carbon properties, together with a decrease of surface area of 35–48%. The materials still exhibit a large electrochemical surface area, according to electrochemical impedance and cyclic voltammetry experiments. Upon electrooxidation, the relative amount of oxygen increases according to a comparative analysis of X-ray photoelectron spectroscopy test of the electrodes before and after potential holding. The results are of interest to define strategies towards the amelioration of carbon degradation by electrooxidation in electrochemical devices., The authors gratefully acknowledge financial support given by Spanish Ministry of Science, Innovation and Universities MICINN (ENE2017-83976-C2-1-R) and to the Aragón Government to the Fuel Conversion Group (T06_17R). DS acknowledges also MICINN for his Ramón y Cajal contract (RyC-2016-20944)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Insights on the electrochemical oxidation of ordered mesoporous carbons

  • Pérez Rodríguez, Sara
  • Sebastián del Río, David
  • Lázaro Elorri, María Jesús
6 Figures, 3 Tables., Ordered mesoporous carbon materials (OMC) present a developed porosity, making them promising candidates for electrochemical energy-conversion devices. However, OMC undergo electrochemical oxidation causing the degradation of electrodes and exhibit low electrical conductivities due to their amorphous carbon structure. To address these issues, OMC can be graphitized by thermal treatments. Herein, the electrooxidation behavior of different OMC, prior and upon graphitization, is studied by chronoamperometry in a highly acidic electrolyte (0.5 M H2SO4). Several oxidation potentials and temperatures are used to gain insights on the electrooxidation mechanism. Potential holding tests evidenced differences in the oxidation behavior of as-synthesized and graphitized materials. Graphitization results in a strong decrease of the oxidation charge from 93 to 7% depending on the carbon properties, applied potential and temperature. Temperature plays an important role on carbon degradation of not-graphitized OMC, with a strong electrochemical capacitance loss (90%–93%) after tests at 40 °C and 60 °C. Conversely, graphitized materials present a raise of the capacitance by the creation of oxygen-functionalities as confirmed by post-mortem X-ray photoelectron spectra analysis. Additionally, graphitized materials show an increase of the apparent activation energy associated to electrooxidation (7 times higher), indicative of their improved resistance., The authors gratefully acknowledge financial support given by Spanish Ministry of Science, Innovation and Universities MICINN (ENE2017-83976-C2-1-R) and to the Aragón Government to the Fuel Conversion Group (T06_17R). DS acknowledges also MICINN for his Ramón y Cajal contract (RyC-2016-20944)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Capacitance enhancement of hydrothermally reduced graphene oxide nanofibers

  • Torres Gamarra, Daniel
  • Pérez Rodríguez, Sara
  • Sebastián del Río, David
  • Pinilla Ibarz, José Luis
  • Lázaro Elorri, María Jesús
  • Suelves Laiglesia, Isabel
9 figures, 4 tables., Nanocarbon materials present sp2-carbon domains skilled for electrochemical energy conversion or storage applications. In this work, we investigate graphene oxide nanofibers (GONFs) as a recent interesting carbon material class. This material combines the filamentous morphology of the starting carbon nanofibers (CNFs) and the interlayer spacing of graphene oxide, and exhibits a domain arrangement accessible for fast transport of electrons and ions. Reduced GONFs (RGONFs) present the partial removal of basal functional groups, resulting in higher mesoporosity, turbostratic stacking, and surface chemistry less restrictive for transport phenomena. Besides, the filament morphology minimizes the severe layer restacking shown in the reduction of conventional graphene oxide sheets. The influence of the reduction temperature (140–220 °C) on the electrochemical behaviour in aqueous 0.5 M H2SO4 of RGONFs is reported. RGONFs present an improved capacitance up to 16 times higher than GONFs, ascribed to the unique structure of RGONFs containing accessible turbostratic domains and restored electronic conductivity. Hydrothermal reduction at 140 °C results in the highest capacitance as evidenced by cyclic voltammetry and electrochemical impedance spectroscopy measurements (up to 137 F·g−1). Higher temperatures lead to the removal of sulphur groups and slightly thicker graphite domains, and consequently a decrease of the capacitance., This research was funded by FEDER, the Spanish Ministry of Science, Innovation and Universities MICINN (ENE2017-83976-C2-1-R & ENE2017-83854-R) and by the Aragón Government to the Fuel Conversion Group (T06_17R). DS thanks MICINN for his Ramón y Cajal research contract (RyC-2016-20944)., Peer reviewed