Pasar al contenido principal

COLLOIDAL SYSTEMS FOR THE DESIGN OF POLYMER/INORGANIC HYBRID NANOSTRUCTURES

RYC-2013-13451

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i
Subprograma Subprograma Estatal de Incorporación
Convocatoria Ramón y Cajal
Año convocatoria 2013
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario UNIVERSITAT DE VALÈNCIA
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Controlling dielectrical properties of polymer blends through defined PEDOT nanostructures

  • Sanchis Sánchez, María Jesús|||0000-0002-3528-3966
  • Carsí Rosique, Marta|||0000-0003-2315-3344
  • Redondo Foj, María Belén
  • Ortiz Serna, Mª Pilar
  • Culebras, Mario
  • Gomez, Clara M.
  • Cantarero, Andres
  • Munoz-Espi, Rafael
[EN] The paper reports the crucial role of the morphology of poly(3,4-ethylenedioxythiophene) (PEDOT) nanostructures on the thermal and dielectric properties of polymer blends prepared thereof. PEDOT nanostructures with two different morphologies (nanoparticles and nanowires) were synthesized. The size for the nanoparticles was in the range 10 40 nm and the diameter of the nanowires was of ca. 200 nm. These nanostructures were blended with an insulating polymer matrix, poly(methyl methacrylate) (PMMA), to evaluate the dielectrical properties of the materials. The results of broadband dielèctric spectroscopy showed a strong correlation between the morphology of the nanostructure and the improvement of the electrical properties of the material., The authors acknowledge the financial support of the DGCYT through Grant MAT2015-63955-R. R. M. E. also acknowledges the financial support from the Spanish Ministry of Economy and Competitiveness through a Ramon y Cajal grant (grant No. RYC-2013-13451) and M. C. acknowledges the FPU program of the Spanish Ministry of Culture, Education and Sports.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Conducting PEDOT Nanoparticles: Controlling Colloidal Stability and Electrical Properties

  • Culebras,M.
  • Serrano-Claumarchirant, José F.
  • Landfester, Katharina
  • Cantarero, A.
  • Gomez- Clari, Clara Maria
  • Muñoz-Espí, Rafael
  • Sanchis Sánchez, María Jesús|||0000-0002-3528-3966
[EN] The synthesis of conducting polymer nano particles by oxidative polymerization can be a challenge because the addition of oxidizers may compromise the colloidal stability of the system. In this work, we report the successful synthesis of poly(3,4-ethylenedioxythiophene) (PEDOT) nanoparticles by means of miniemulsion polymerization. We study the role of oxidizing agents (iron(III) p-toluenesulfonate and hydrogen peroxide) during the particle formation and in the electric properties. The presence of hydrogen peroxide is demonstrated to be crucial in the macroscopic stability of the suspensions and in the morphology of the resulting nanoparticles. The obtained suspensions, containing particles of diameters of around 30 nm, are stable for several months. The electrical conductivity increases with increasing the content of iron(III) p-toluenesulfonate, but it decreases with addition of hydrogen peroxide, which can be explained by secondary reactions in the polymerization process., The authors acknowledge the financial support from the Direction General de Investigation Cientifica y Tecnica through a grant of the Program Consolider Ingenio (Grant CSD2010-0044) and Grant MAT2015-63955-R. The authors also thank the Max Planck Society through the funding of the Max Planck Partner Group on Colloidal Methods for Multifunctional Materials (CM3) at the University of Valencia, headed by R.M.E. M.C. acknowledges the financial support by the Spanish Ministry of Education, Culture and Sport through the FPU training program and the German Academic Exchange Service (DAAD) for a short-term research scholarship at the Max Planck Institute for Polymer Research. Finally, R.M.E. thanks the financial support from the Spanish Ministry of Economy and Competitiveness through a Ramon y Cajal grant (Grant RYC-2013-13451).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Electrochemical Synthesis of an Organic Thermoelectric Power Generator

  • Serrano-Claumarchirant. José F.
  • Brotons-Alcázar, Isaac
  • Culebras, M.
  • Cantarero, A.
  • Muñoz-Espí, Rafael
  • Gomez, C.M.
  • Sanchis Sánchez, María Jesús|||0000-0002-3528-3966
[EN] Energy harvesting through residual heat is considered one of the most promising ways to power wearable devices. In this work, thermoelectric textiles were prepared by coating the fabrics, first with multiple-wall carbon nanotubes (MWCNTs) by using the layer-by-layer technique and second with poly(3,4-ethylenedioxythiophene) (PEDOT) deposited by electrochemical polymerization. Sodium deoxycholate and poly(diallyldimethylammonium chloride) were used as stabilizers to prepare the aqueous dispersions of MWCNTs. The electrochemical deposition of PEDOT on the MWCNT-coated fabric was carried out in a three-electrode electrochemical cell. The polymerization of PEDOT on the fabric increased the electrical conductivity by ten orders of magnitude (through the plane), establishing an excellent path for electric transport across the fabrics. In addition, the fibers showed a Seebeck coefficient of 14.3 ¿V K¿1, which is characteristic of highly doped PEDOT. As a proof of concept, several thermoelectric modules were made with different elements based on the coated acrylic and cotton fabrics. The best generator made of 30 thermoelectric elements using acrylic fabrics exhibited an output power of 0.9 ¿W with a temperature difference of 31 K., This research was supported by the General Direction of Scientific and Technical Research of the Spanish Government through a grant of the Program Consolider Ingenio (grant no. CSD2010-0044) and grant MAT2015-63955-R. J.F.S.-C. and I.B.-A. acknowledge the financial support by the Spanish Ministry of Education, Culture and Sport through the FPU Training Program. Finally, R.M.-E. thanks the financial support of the Spanish Ministry of Science and Innovation through a Ramon y Cajal grant (grant no. RYC-2013-13451).