Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

Repositorio Digital de la UPF
Publicación Artículo científico (JournalArticle)

Remote electrical stimulation by means of implanted rectifiers

  • Ivorra Cano, Antoni, 1974-
Miniaturization of active implantable medical devices is currently compromised by the available means for electrically/npowering them. Most common energy supply techniques for implants – batteries and inductive couplers – comprise bulky/nparts which, in most cases, are significantly larger than the circuitry they feed. Here, for overcoming such miniaturization/nbottleneck in the case of implants for electrical stimulation, it is proposed to make those implants act as rectifiers of high/nfrequency bursts supplied by remote electrodes. In this way, low frequency currents will be generated locally around the/nimplant and these low frequency currents will perform stimulation of excitable tissues whereas the high frequency currents/nwill cause only innocuous heating. The present study numerically demonstrates that low frequency currents capable of/nstimulation can be produced by a miniature device behaving as a diode when high frequency currents, neither capable of/nthermal damage nor of stimulation, flow through the tissue where the device is implanted. Moreover, experimental/nevidence is provided by an in vivo proof of concept model consisting of an anesthetized earthworm in which a commercial/ndiode was implanted. With currently available microelectronic techniques, very thin stimulation capsules (diameter/n,500 mm) deliverable by injection are easily conceivable., This author's research is currently supported by a Ramón y Cajal fellowship from the Spanish Ministry for Science and Innovation (RYC-2009-04271) and a Marie Curie International Reintegration Grant (256376 – “TAMIVIVE”) from the European Commission. The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript.
Repositorio Digital de la UPF
Publicación Artículo científico (JournalArticle)

In vivo demonstration of addressable microstimulators powered by rectification of epidermically applied currents for miniaturized neuroprostheses

  • Becerra Fajardo, Laura
  • Ivorra Cano, Antoni, 1974-
Electrical stimulation is used in order to restore nerve mediated functions in patients with neurological disorders, but its applicability is constrained by the invasiveness of the systems required to perform it. As an alternative to implantable systems consisting of central stimulation units wired to the stimulation electrodes, networks of wireless microstimulators have been devised for fine movement restoration. Miniaturization of these microstimulators is currently hampered by the available methods for powering them. Previously, we have proposed and demonstrated a heterodox electrical stimulation method based on electronic rectification of high frequency current bursts. These bursts can be delivered through textile electrodes on the skin. This approach has the potential to result in an unprecedented level of miniaturization as no bulky parts such as coils or batteries are included in the implant. We envision microstimulators designs based on application-specific integrated circuits (ASICs) that will be flexible, thread-like (diameters <0.5 mm) and not only with controlled stimulation capabilities but also with sensing capabilities for artificial proprioception. We in vivo demonstrate that neuroprostheses composed of addressable microstimulators based on this electrical stimulation method are feasible and can perform controlled charge-balanced electrical stimulation of muscles. We developed miniature external circuit prototypes connected to two bipolar probes that were percutaneously implanted in agonist and antagonist muscles of the hindlimb of an anesthetized rabbit. The electronic implant architecture was able to/ndecode commands that were amplitude modulated on the high frequency (1 MHz) auxiliary current bursts. The devices were capable of independently stimulating the target tissues, accomplishing controlled dorsiflexion and plantarflexion joint movements. In addition, we/nnumerically show that the high frequency current bursts comply with safety standards both in terms of tissue heating and unwanted electro-stimulation. We demonstrate that addressable microstimulators powered by rectification of epidermically applied currents are feasible., This work was supported in part by the Ramón y Cajal fellowship (RYC-2009-04271) from the Spanish government and by a Marie Curie grant (IRG 256376) from the European Commission.
Repositorio Digital de la UPF
Publicación Contribución de congreso (ConferenceOutput)

Injectable rectifiers as microdevices for remote electrical stimulation: an alternative to inductive coupling

  • Ivorra Cano, Antoni, 1974-
  • Sacristán, Jordi
  • Baldi, Antonio
Presented at World Congress on Medical Physics and Biomedical Engineering; 2012 May 26-31; Beijing, China., Miniaturization of implantable medical elec-tronic devices is currently compromised by the available means for electrically powering them. Most common energy supply techniques for implants – batteries and inductive cou-plers – comprise bulky parts which, in most cases, are signifi-cantly larger than the circuitry they feed. For overcoming such miniaturization bottleneck in the case of implants for electrical stimulation, we recently proposed and demonstrated a method based on making the implants operate as rectifiers of bursts of high frequency current supplied by remote electrodes. In this way, low frequency current is generated locally around the implant and this low frequency current performs stimulation of excitable tissues whereas the high frequency current only causes innocuous heating. The present paper reports further progress in this technology. We first describe construction and functional test of an injectable stimulator consisting of a single miniature diode (300 μm × 300 μm × 600 μm) and two thin electrodes which is implanted trough a 19G needle into an anesthetized earthworm. We then propose a circuit architec-ture for implementing smart implants based on this technol-ogy. Both accomplishments are steps towards the implementa-tion of injectable addressable microsystems for neuroprosthetics. These systems based on the proposed tech-nology will look like short pieces of flexible thread rather than rigid capsules, as it was the case of previous miniature electri-cal stimulation implants. With currently available microelec-tronic techniques, very thin stimulation implants (diameter < 200 μm) are easily conceivable. This technology may be foun-dational to a broad range of new developments in the field of implantable medical devices with applications ranging from wound healing to nerve stimulation for pain relief. In addition, other non-medical devices could also emerge such as implant-able identification devices., AI’s research is supported by a Ramón y Cajal fellow-ship from the Spanish Ministry for Science and Innovation and a Marie Curie IRG from the European Commission
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Injectable rectifiers as microdevices for remote electrical stimulation: an alternative to inductive coupling

  • Ivorra Cano, Antoni, 1974-
  • Sacristán, Jordi
  • Baldi, Antonio
Presented at World Congress on Medical Physics and Biomedical Engineering; 2012 May 26-31; Beijing, China., Miniaturization of implantable medical elec-tronic devices is currently compromised by the available means for electrically powering them. Most common energy supply techniques for implants – batteries and inductive cou-plers – comprise bulky parts which, in most cases, are signifi-cantly larger than the circuitry they feed. For overcoming such miniaturization bottleneck in the case of implants for electrical stimulation, we recently proposed and demonstrated a method based on making the implants operate as rectifiers of bursts of high frequency current supplied by remote electrodes. In this way, low frequency current is generated locally around the implant and this low frequency current performs stimulation of excitable tissues whereas the high frequency current only causes innocuous heating. The present paper reports further progress in this technology. We first describe construction and functional test of an injectable stimulator consisting of a single miniature diode (300 μm × 300 μm × 600 μm) and two thin electrodes which is implanted trough a 19G needle into an anesthetized earthworm. We then propose a circuit architec-ture for implementing smart implants based on this technol-ogy. Both accomplishments are steps towards the implementa-tion of injectable addressable microsystems for neuroprosthetics. These systems based on the proposed tech-nology will look like short pieces of flexible thread rather than rigid capsules, as it was the case of previous miniature electri-cal stimulation implants. With currently available microelec-tronic techniques, very thin stimulation implants (diameter < 200 μm) are easily conceivable. This technology may be foun-dational to a broad range of new developments in the field of implantable medical devices with applications ranging from wound healing to nerve stimulation for pain relief. In addition, other non-medical devices could also emerge such as implant-able identification devices., AI’s research is supported by a Ramón y Cajal fellow-ship from the Spanish Ministry for Science and Innovation and a Marie Curie IRG from the European Commission
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

In vivo demonstration of addressable microstimulators powered by rectification of epidermically applied currents for miniaturized neuroprostheses

  • Becerra Fajardo, Laura
  • Ivorra Cano, Antoni, 1974-
Electrical stimulation is used in order to restore nerve mediated functions in patients with neurological disorders, but its applicability is constrained by the invasiveness of the systems required to perform it. As an alternative to implantable systems consisting of central stimulation units wired to the stimulation electrodes, networks of wireless microstimulators have been devised for fine movement restoration. Miniaturization of these microstimulators is currently hampered by the available methods for powering them. Previously, we have proposed and demonstrated a heterodox electrical stimulation method based on electronic rectification of high frequency current bursts. These bursts can be delivered through textile electrodes on the skin. This approach has the potential to result in an unprecedented level of miniaturization as no bulky parts such as coils or batteries are included in the implant. We envision microstimulators designs based on application-specific integrated circuits (ASICs) that will be flexible, thread-like (diameters <0.5 mm) and not only with controlled stimulation capabilities but also with sensing capabilities for artificial proprioception. We in vivo demonstrate that neuroprostheses composed of addressable microstimulators based on this electrical stimulation method are feasible and can perform controlled charge-balanced electrical stimulation of muscles. We developed miniature external circuit prototypes connected to two bipolar probes that were percutaneously implanted in agonist and antagonist muscles of the hindlimb of an anesthetized rabbit. The electronic implant architecture was able to/ndecode commands that were amplitude modulated on the high frequency (1 MHz) auxiliary current bursts. The devices were capable of independently stimulating the target tissues, accomplishing controlled dorsiflexion and plantarflexion joint movements. In addition, we/nnumerically show that the high frequency current bursts comply with safety standards both in terms of tissue heating and unwanted electro-stimulation. We demonstrate that addressable microstimulators powered by rectification of epidermically applied currents are feasible., This work was supported in part by the Ramón y Cajal fellowship (RYC-2009-04271) from the Spanish government and by a Marie Curie grant (IRG 256376) from the European Commission.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Remote electrical stimulation by means of implanted rectifiers

  • Ivorra Cano, Antoni, 1974-
Miniaturization of active implantable medical devices is currently compromised by the available means for electrically/npowering them. Most common energy supply techniques for implants – batteries and inductive couplers – comprise bulky/nparts which, in most cases, are significantly larger than the circuitry they feed. Here, for overcoming such miniaturization/nbottleneck in the case of implants for electrical stimulation, it is proposed to make those implants act as rectifiers of high/nfrequency bursts supplied by remote electrodes. In this way, low frequency currents will be generated locally around the/nimplant and these low frequency currents will perform stimulation of excitable tissues whereas the high frequency currents/nwill cause only innocuous heating. The present study numerically demonstrates that low frequency currents capable of/nstimulation can be produced by a miniature device behaving as a diode when high frequency currents, neither capable of/nthermal damage nor of stimulation, flow through the tissue where the device is implanted. Moreover, experimental/nevidence is provided by an in vivo proof of concept model consisting of an anesthetized earthworm in which a commercial/ndiode was implanted. With currently available microelectronic techniques, very thin stimulation capsules (diameter/n,500 mm) deliverable by injection are easily conceivable., This author's research is currently supported by a Ramón y Cajal fellowship from the Spanish Ministry for Science and Innovation (RYC-2009-04271) and a Marie Curie International Reintegration Grant (256376 – “TAMIVIVE”) from the European Commission. The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript.