Pasar al contenido principal

Detectors for molecular imaging

RYC2021-031744-I

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Desarrollar, Atraer y Retener Talento
Subprograma Subprograma Estatal de Incorporación
Convocatoria Ramón y Cajal
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Design and first experimental results of an edgeless PET prototype for breast imaging: DeepBreast

  • Freire-López-Fando, Marta
  • Jiménez-Serrano, Santiago|||0000-0003-2917-6053
  • García-Aparisi, Francisco Brandan|||0000-0001-6569-0864
  • Toledo Alarcón, José Francisco|||0000-0002-9782-4510
  • Vidal San Sebastian, Luis Fernando|||0000-0001-8852-8560
  • Loignon-Houle, Francis
  • Alfonso Laguna, Carlos De|||0000-0002-2378-021X
  • Rodríguez-Álvarez, M.J.|||0000-0001-8333-8792
  • F Sánchez
  • González Martínez, Antonio Javier
  • Gonzalez-Montoro, Andrea
  • Barbera, Julio
  • Alamo, Jorge
  • Torres-Espallardo, Irene
  • Echegoyen-Blasco, Sara
[EN] BackgroundBreast cancer causes the largest number of cancer-related deaths among women worldwide. With the aim of improving Positron Emission Tomography (PET) technology for accurate breast cancer diagnosis and staging, we propose a system design based on monolithic crystals with inherent Depth of Interaction (DOI) capabilities and an innovative edgeless detector ring. This approach eliminates the physical gaps between PET detectors, improving the system detection efficiency while potentially enhancing the image quality since edge effects are reduced. We have developed a dedicated breast PET system prototype (DeepBreast) to show the feasibility of this design. The system is composed of 14 curved LYSO monolithic scintillators of 12.5 mm thickness glued side-by-side with a high-refractive index compound. The useful transaxial and axial Field of View (FOV) of the system are 160 mm and 50 mm, respectively. A Neural Network technique was used for the x- and y- photon impact position estimation. The impact DOI and energy values were determined using the Voronoi calibration methodology. An initial experimental evaluation of the DeepBreast system has been performed inspired by the NEMA protocols for whole-body and small-animals PET scanners.ResultsA nearly flat spatial resolution as a function of radial position was obtained, which indicates the DOI capability of the system to mitigate parallax errors. An average spatial resolution of 1.9 +/- 0.1 mm, 1.9 +/- 0.1 mm and 1.7 +/- 0.1 mm FWHM was achieved at the center of the axial FOV for the radial, tangential, and axial directions, respectively. A maximum sensitivity value of 2% was measured at the center of the FOV. The noise equivalent count rate peak reached 15 kcps at 13.4 MBq. Moreover, percent contrast values of 27.9%, 28.8%, 56.8%, 72.5%, 87.2% and 84.2% were achieved for 4.5 mm, 6 mm, 9 mm, 12 mm, 15 mm and 20 mm cylinders of a larger dedicated IQ phantom, respectively.ConclusionsThe initial experimental results demonstrate the feasibility of the DeepBreast as an innovative PET scanner for breast cancer imaging., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

NEMA NU 4-2008 performance and MRI-compatibility study of the edgeless preclinical PET insert: ScintoTube

  • Gonzalez-Montoro, Andrea
  • Lopez-Berenguer, Fernando
  • Alamo. Jorge
  • Barberá, Julio
  • Berr, Stuart S.
  • Correcher, Carlos
  • Rispoli, Joseph V.
  • Sachs, Jennifer L.
  • Vidal, Luis F.
  • Williams, Mark B.
  • Benlloch, Jose M.
  • Gonzalez, Antonio J.
  • Freire-López-Fando, Marta
  • Alfonso Laguna, Carlos De|||0000-0002-2378-021X
  • Moliner Martínez, Laura
[EN] Objective. The goal of this work is to evaluate the performance of a preclinical Positron emission tomography (PET) system, named ScintoTube, which was constructed using a continuous (edgeless) LYSO:Ce scintillator. The PET compatibility tests with high-field magnetic resonance imaging (MRI) scanners are also reported. Approach. We constructed a preclinical PET system based on a single, continuous-annular LYSO:Ce scintillator, with inner and outer diameters of 64 mm and 80 mm, respectively, and an axial coverage of 96 mm. The system has 24 virtual detectors, being each one composed of a matrix of 9 × 9 silicon photomultipliers. A novel trigger topology was implemented to retrieve the entire light distribution (LD) profiles. This information was used to provide the 3D photon impact coordinates which included the depth of interaction (DOI) information. To evaluate the ScintoTube performance, the National Electrical Manufacturers Association NU 4-2008 protocol was followed. Dead time and quantification corrections were implemented in the reconstruction process. Moreover, since the system is intended to be used as an insert for high-field MRI scanners, it was evaluated when working under the influence of 7 T and 9.4 T MRI scanners by acquiring data with different MRI sequences. Results. This work successfully implements the edgeless concept for small animal PET insert and demonstrates that it is possible to retrieve homogeneous 3D photon impact positioning accuracy (in the 1 mm range) across the axial field of view by using an edgeless design. The reported results also validate the capabilities of the PET insert to work under the influence of high-field MRI. There is almost no influence of the MR in our PET insert regarding spatial and energy resolutions and photopeak position. All PET parameter deviations are within the ±5% range when compared to non-MRI case. Significance. Overall, the obtained results show that the designed ScintoTube is a promising system to be used as an insert with unique capabilities such as fully characterizing the entire LD profiles (3D positioning), suppressing edge effects in the transaxial and axial directions, and improving sensitivity., Andrea Gonzalez-Montoro is supported by the Spanish Ministry of Science and Innovation and the European Social Fund Project: RYC2021-031744-I.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Impact on PET spatial resolution through positron range confinement in a high magnetic field across tissue-equivalent materials

  • Lopez-Berenguer, Fernando
  • Gonzalez-Montoro, Andrea
  • Berr, S. S.
  • Williams, M. B.
  • Freire-López-Fando, Marta
  • González Martínez, Antonio Javier
[EN] Objective. The spatial resolution of positron emission tomography (PET) imaging is intrinsically limited by the finite range of positrons before annihilation, an effect that becomes increasingly relevant for high-energy emitters and for preclinical studies targeting small structures. In integrated PET/ magnetic resonance imaging (MRI) systems, the magnetic field can modify positron trajectories, reducing their transverse spread and introducing anisotropic resolution effects. However, experimental evidence of the combined influence of positron energy and material density under high-field preclinical conditions remains limited. This work experimentally investigates the effect of a 9.4 T magnetic field on positron-range blurring for different radionuclides and tissue-equivalent phantoms in a preclinical PET/MRI environment. Approach. Experiments were performed using a high-resolution preclinical PET insert operating simultaneously inside a preclinical 9.4 T MRI system to study three positron-emitting radionuclides (18F, Zr-8(9) and 6(8)Ga). Capillary line sources were embedded in three tissue-equivalent phantoms with increasing density. Spatial resolution was quantified along the three spatial directions using the full width at half maximum and full width at tenth maximum (FWTM). Complementary measurements with a microDerenzo phantom were performed to assess rod resolvability. Main results. In low-density material, spatial resolution remains essentially unchanged by the magnetic field for all radionuclides. In contrast, in medium- and high-density materials, a marked transverse confinement is observed at 9.4 T for 6(8)Ga, with transverse FWTM values reduced by about 60% compared with 0 T, while the axial component remains largely unaffected. For Zr-8(9), transverse improvements of about 25% are observed. These trends are consistent with the microDerenzo results: for 6(8)Ga, no rod sector is resolvable at 0 T, whereas at 9.4 T rods close to 1.0 mm become resolvable. Significance. This study provides a systematic experimental assessment of positron-range confinement in high-field preclinical PET/MRI and demonstrates that the magnitude of magnetic-field-induced resolution improvements depends on both positron energy and material density., This work was supported by the Generalitat Valenciana under Grant No. CIPROM/2021/003 and Funding from the University of Virginia Focused Ultrasound Cancer Immunotherapy Center and the FUS Foundation. We acknowledge additional support from the National Institutes of Health award R01EB029450 to S.S.Berr and A.J.Gonzalez. A. Gonzalez-Montoro is supported by the Spanish Ministry of Science and Innovation and the European Social Fund project: RYC2021-031744-I. M. Freire is supported by Generalitat Valenciana through CIAPOS/2023/141 postdoctoral grant. The experimental work carried out at the University of Virginia was supported through the iMOVE mobility programme of the Spanish National Research Council (CSIC).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

First Results of the 4D-PET Brain System

  • A González
  • Álamo-Valenzuela, Jorge
  • Barberá-Ballester, Julio
  • Lucero-Ruiz, Alejandro
  • Díaz González, Karel
  • Álvaro Mondejar
  • Morera-Ballester, Constantino
  • John Prior
  • Jiménez-Serrano, Santiago|||0000-0003-2917-6053
  • Cucarella-Melo, Neus
  • Freire-López-Fando, Marta
  • González Martínez, Antonio Javier
  • Moliner Martínez, Laura
  • Sanchez-Gonzalo, David
  • Benlloch Baviera, Jose María|||0000-0001-6073-1436
[EN] Positron Emission Tomography (PET) imaging is the molecular technique of choice for studying many illnesses, including the ones related to the brain. Nevertheless, the use of PET scanners in neurology is limited by several factors, such as their limited availability for brain imaging due to the high oncology demand for PET and the low sensitivity and poor spatial resolution in the brain of the standard PET scanners. To expand the PET application in neurology, brain-specific systems with increased clinical and physical sensitivities and higher spatial resolution are required. The present work reports on the design and development process of a compact dedicated PET scanner suitable for human brain imaging. This paper includes the description and experimental validation of the detector components and their implementation in a full-size system called 4D-PET. The detector has been designed to simultaneously provide photon DOI and TOF information. It is based on the semi-monolithic LYSO modules optically coupled to SiPMs and connected to a multiplexing readout. The analog output signals are fed to the PETsys TOFPET2 ASIC circuits enabling scalability of the readout. The evaluation of the 4D-PET modules resulted in average detector resolutions of 2.1±1.0 mm, 3.4±1.8 mm, and 386±9 ps for the y- (transaxial direction), DOI-, and CTR TOF, respectively. The preliminary 4D-PET imaging performance is reported through simulations and, for the first time, through the real reconstructed images (collected in the La Fe Hospital, Valencia)., This work was supported in part by the European Research Council (ERC) under the European Union's Horizon 2020 Research and Innovation Program under Grant 695536, and in part by the Generalitat Valenciana through the Program Equipamiento e Infraestructuras FEDER 2021-22 under Grant IDIFEDER/2021/004. The work of Andrea Gonzalez-Montoro was supported by MICIU/AEI/SFE/RYC2021-031744-I.All authors contributed equally to this work.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

NEMA NU 4-2008 performance and MRI-compatibility study of the edgeless preclinical PET insert: ScintoTube

  • González Montoro, Andrea
  • Freire, Marta
  • López Berenguer, Fernando
  • Alamo, Jorge
  • Alfonso, Carlos de
  • Barberá Ballester, Julio
  • Berr, Stuart S.
  • Correcher Salvador, Carlos
  • Moliner Martínez, Laura
  • Rispoli, Joseph Vincent
  • Sachs, Jennifer L.
  • Vidal, Luis F.
  • Williams, Mark B.
  • Benlloch Baviera, José María
  • González Martínez, Antonio Javier
[Objective] The goal of this work is to evaluate the performance of a preclinical Positron emission tomography (PET) system, named ScintoTube, which was constructed using a continuous (edgeless) LYSO:Ce scintillator. The PET compatibility tests with high-field magnetic resonance imaging (MRI) scanners are also reported., [Approach] We constructed a preclinical PET system based on a single, continuous-annular LYSO:Ce scintillator, with inner and outer diameters of 64 mm and 80 mm, respectively, and an axial coverage of 96 mm. The system has 24 virtual detectors, being each one composed of a matrix of 9 × 9 silicon photomultipliers. A novel trigger topology was implemented to retrieve the entire light distribution (LD) profiles. This information was used to provide the 3D photon impact coordinates which included the depth of interaction (DOI) information. To evaluate the ScintoTube performance, the National Electrical Manufacturers Association NU 4-2008 protocol was followed. Dead time and quantification corrections were implemented in the reconstruction process. Moreover, since the system is intended to be used as an insert for high-field MRI scanners, it was evaluated when working under the influence of 7 T and 9.4 T MRI scanners by acquiring data with different MRI sequences., [Results] This work successfully implements the edgeless concept for small animal PET insert and demonstrates that it is possible to retrieve homogeneous 3D photon impact positioning accuracy (in the 1 mm range) across the axial field of view by using an edgeless design. The reported results also validate the capabilities of the PET insert to work under the influence of high-field MRI. There is almost no influence of the MR in our PET insert regarding spatial and energy resolutions and photopeak position. All PET parameter deviations are within the ±5% range when compared to non-MRI case., [Significance] Overall, the obtained results show that the designed ScintoTube is a promising system to be used as an insert with unique capabilities such as fully characterizing the entire LD profiles (3D positioning), suppressing edge effects in the transaxial and axial directions, and improving sensitivity., Andrea Gonzalez-Montoro is supported by the Spanish Ministry of Science and Innovation and the European Social Fund Project: RYC2021-031744-I., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Impact on PET spatial resolution through positron range confinement in a high magnetic field across tissue-equivalent materials

  • López Berenguer, Fernando
  • González Montoro, Andrea
  • Freire, Marta
  • Berr, Stuart S.
  • Williams, Mark B.
  • González Martínez, Antonio Javier
[Data availability statement] The data that support the findings of this study are available from the corresponding author upon reasonable request. The data are not publicly available at the time of publication due to their large size and the absence of an institutional repository for this dataset., Objective.The spatial resolution of positron emission tomography (PET) imaging is intrinsically limited by the finite range of positrons before annihilation, an effect that becomes increasingly relevant for high-energy emitters and for preclinical studies targeting small structures. In integrated PET/ magnetic resonance imaging (MRI) systems, the magnetic field can modify positron trajectories, reducing their transverse spread and introducing anisotropic resolution effects. However, experimental evidence of the combined influence of positron energy and material density under high-field preclinical conditions remains limited. This work experimentally investigates the effect of a 9.4 T magnetic field on positron-range blurring for different radionuclides and tissue-equivalent phantoms in a preclinical PET/MRI environment.Approach.Experiments were performed using a high-resolution preclinical PET insert operating simultaneously inside a preclinical 9.4 T MRI system to study three positron-emitting radionuclides (18F, ⁸⁹Zr and6⁸Ga). Capillary line sources were embedded in three tissue-equivalent phantoms with increasing density. Spatial resolution was quantified along the three spatial directions using the full width at half maximum and full width at tenth maximum (FWTM). Complementary measurements with a microDerenzo phantom were performed to assess rod resolvability.Main results.In low-density material, spatial resolution remains essentially unchanged by the magnetic field for all radionuclides. In contrast, in medium- and high-density materials, a marked transverse confinement is observed at 9.4 T for6⁸Ga, with transverse FWTM values reduced by about 60% compared with 0 T, while the axial component remains largely unaffected. For ⁸⁹Zr, transverse improvements of about 25% are observed. These trends are consistent with the microDerenzo results: for6⁸Ga, no rod sector is resolvable at 0 T, whereas at 9.4 T rods close to 1.0 mm become resolvable.Significance.This study provides a systematic experimental assessment of positron-range confinement in high-field preclinical PET/MRI and demonstrates that the magnitude of magnetic-field-induced resolution improvements depends on both positron energy and material density., This work was supported by the Generalitat Valenciana under Grant No. CIPROM/2021/003 and funding from the University of Virginia Focused Ultrasound Cancer Immunotherapy Center and the FUS Foundation. We acknowledge additional support from the National Institutes of Health award R01EB029450 to S.S.Berr and A.J.Gónzalez. A. Gonzalez-Montoro is supported by the Spanish Ministry of Science and Innovation and the European Social Fund project: RYC2021-031744-I. M. Freire is supported by Generalitat Valenciana through CIAPOS/2023/141 postdoctoral grant. The experimental work carried out at the University of Virginia was supported through the iMOVE mobility programme of the Spanish National Research Council (CSIC)., Peer reviewed