Pasar al contenido principal

Energy efficiency in buildings

RYC2021-034265-I

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Desarrollar, Atraer y Retener Talento
Subprograma Subprograma Estatal de Incorporación
Convocatoria Ramón y Cajal
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE ZARAGOZA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 13
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Energy Self-Sufficiency Urban Module (ESSUM): GIS-LCA-based multi-criteria methodology to analyze the urban potential of solar energy generation and its environmental implications

  • Guillén-Lambea, S.
  • Sierra-Pérez, J.
  • García-Pérez, S.
  • Montealegre, A. L.
  • Monzón-Chavarrías, M.
The concentration of the population in cities has turned them into sources of environmental pollution, however, cities have a great potential for generating clean energy through renewable sources such as a responsible use of solar energy that reaches its rooftops. This work proposes a methodology to estimate the level of energy self-sufficiency in urban areas, particularly in a district of the city of Zaragoza (Spain). First, the Energy Self-Sufficiency Urban Module concept (ESSUM) is defined, then the self-sufficiency capacity of the city or district is determined using Geographical Information Systems (GIS), Light Detection and Ranging (LiDAR) point clouds and cadastral data. Secondly, the environmental implications of the implementation of these modules in the rooftops of the city using the LCA methodology are calculated. The results obtained show that total self-sufficiency of Domestic Hot Water (DHW) can be achieved using 21 % of available rooftop area, meanwhile the rest of rooftop area, dedicated to photovoltaic (PV), can reach 20 % of electricity self-sufficiency, supposing a final balance of a reduction in CO2 emissions of 12,695.4 t CO2eq/y and energy savings of 372,468.5 GJ/y. This corresponds to a scenario where full self-sufficiency of DHW was prioritized, with the remaining roof area dedicated to PV installation. In addition, other scenarios have been analyzed, such as the implementation of the energy systems separately.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Life cycle assessment of power generation systems in Spain: Exploring a broader view from a consequential perspective

  • Guillén-Lambea, Silvia
  • Abrahão, Raphael
  • Carvalho, Monica
Developing new clean power generation systems is a research priority for the energy sector, and selection should be based on environmental performance over the entire lifetime. Consequential Life Cycle Assessment evaluates the consequences of this selection and provides environmental data to support decision-making. This research uses a consequential approach to assess the environmental impacts of two medium power generation systems. The selected environmental impact assessment methods are IPCC 2013 GWP 100y and ReCiPe 2016. Moreover, the work describes a methodology for finding the marginal mix technologies for electricity and cooling energy production depending on the time horizon. The positive environmental consequences associated with short-term marginal energy mixes (electricity and cooling) progressively disappear when the marginal energy mix varies throughout time. The environmental results strongly depend on the marginal mix of technologies and evidence the necessity to develop methodologies and standards to improve the robustness of environmental assessments. A new line of discussion is opened concerning the temporal variation of environmental impacts of an energy production system, which could also be considered in Attributional Life Cycle Assessments.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Is IoT monitoring key to improve building energy efficiency? Case study of a smart campus in Spain

  • García-Monge, Miguel
  • Zalba, Belén
  • Casas, Roberto
  • Cano, Enrique
  • Guillén-Lambea, Silvia
  • López-Mesa, Belinda
  • Martínez, Ignacio
This work validates and demonstrates the potential of a methodology based on a continuous monitoring system with real time measurements, as a key support to make decisions on buildings energy systems based on quantitative data. For this work, a continuous loop-based monitoring methodology was designed and implemented to enhance the performance of Heating Ventilation and Air Conditioning (HVAC) systems by improving the energy efficiency of university buildings and the quality of life of the people who use them. The results from the case study, used to demonstrate the proposed methodology, can be extrapolated to the entire university in order to transform it into a smart campus. The case study also shows that the continuous measurement of temperatures allows to avoid excessive heating, reducing unnecessary energy consumption. Additionally, the case study shows the importance of monitoring CO2 concentration in rooms where occupancy is fluctuating, since it enables a control of the HVAC system based on the instantaneous CO2 level (and predictive in the immediate aftermath). This proposed measurement can save between 40% and 70% of HVAC energy consumption. The positive results obtained in this research show that implementing Internet of Things (IoT) smart ecosystems contribute to promote data-driven decisions in public tertiary buildings among decision-makers, politicians, and other stakeholders.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Ecological Costs of A Microbrewery in The Brazilian Northeast

  • Diniz, Daniel de Paula
  • Guillén-Lambea, Silvia
  • Abrahao, Raphael
  • Pessoa de Oliveira, Ana Katarina
  • Peruchi, Andreza da Silva Santana
  • Carvalho, Monica
Objective: The aim of this study is to investigate the environmental and economic impacts of craft beer production in the Brazilian Northeast, to evidence the main hotspots and propose mitigation alternatives. Theoretical Framework: Life Cycle Thinking proposes a way of thinking that aggregates systems and preserves their interrelationships, to understand the whole of production systems and identify critical points in their subsystems, processes and flows. Here, environmental analysis was carried out through Life Cycle Assessment and economic analysis through Life Cycle Cost Assessment and Ecological Costs. Method: The methodology adopted for this research includes the use of Life Cycle Assessment to quantify environmental emissions, and Life Cycle Cost Assessment and Ecological Costs to quantify economic impacts in a microbrewery located in the Northeast of Brazil. Data was collected through interviews and questionnaires with those responsible for specific sectors of the brewery. Results and Discussion: The results showed that the main environmental hotspot was the local and regional distribution of beer using a gasoline-powered light commercial vehicle. In terms of economics, beer packaged in stainless steel kegs had the lowest cost and beer in aluminum cans had the highest manufacturing cost. When environmental costs were taken into account, beer packaged in a PET growler obtained the best result and beer packaged in a stainless-steel keg obtained the worst economic result. With the implementation of electric vehicle distribution, in addition to the environmental benefits, there were also economic benefits, especially in terms of environmental costs (ecocosts). Research Implications: The practical implications of this research have shown that the use of electric vehicles to distribute the final product (beer) can mitigate environmental emissions, bringing environmental and economic benefits to the company studied. Originality/Value: This study contributes to the literature by being the first Brazilian study to quantify the environmental and economic impacts of craft beer production and distribution. The relevance and value of this research is evidenced by the fact that it proposes tangible solutions to the hotspots identified.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Humberto Santos - Identifying the environmental hotspots in the production of xylitol to be used as a phase change material

  • Da Silva Santos, Humberto
  • Guillén Lambea, Silvia
Life cycle assessment (LCA) allows the quantification of environmental impacts of the complete life cycle of a product. In line with initiatives to decarbonize the energy sector by using thermal energy storage systems, the objective is to compare the environmental impacts of the chemical and biotechnological production processes of xylitol and identify the environmental hotspots.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Reseña (Review)

Environmental assessment of xylitol production routes for thermal energy storage applications: A critical review

  • Santos, Humberto
  • Guillen-Lambea, Silvia
Studies show xylitol as a promising material for thermal energy storage applications. This work aims to critically review, collect, and produce useful data about the life cycle impacts of xylitol's production. One of the practical implications of this work is that it allows the identification of inputs that require attention in decision-making according to various environmental impact indicators. The methodology included a review of the production pathways and market, a systematic review, and a life cycle assessment comparing the production routes. The systematic review showed great variability in the global warming potential regardless of the production pathway, biotechnological or chemical, associated with life cycle assessment assumptions, making a fair comparison between both production processes unfeasible. Thus, a life cycle assessment was conducted with the same assumptions for farming, transportation, and manufacturing stages, finalizing with a local sensitivity analysis to identify the critical inputs. Manufacturing in the chemical process contributes to more than 75 % of the environmental impacts compared to farming and transportation, except for water consumption potential (m3). A breakdown of the manufacturing flows shows that energy usage for the biotechnological process, and energy plus nickel catalyst for the chemical process are the key contributors, confirmed by the local sensitivity analysis. Overall, the biotechnological process showed a global warming potential of 2.2 kg CO2 eq per kg of xylitol. In comparison, the chemical process had a value of 8.8 kg CO2 eq per kg of xylitol, and the same behavior is observed on most of the impact category indicators.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Comparative operational carbon footprints of a vehicle in Brazil: Electric, ethanol, and gasoline

  • Galiza, João Marcelo Fernandes Gualberto
  • Guillén-Lambea, Silvia
  • Carvalho, Monica
This study quantifies the operational carbon footprint of the Renault Kwid E-Tech (electric vehicle) and Renault Kwid Intense flex (gasoline and ethanol internal combustion engine vehicle) under a Well-to-Wheel approach within the Brazilian context. With a functional unit of 100,000 km, this analysis evaluates greenhouse gas (GHG) emissions associated with fuel consumption and considers different electric mixes across Brazilian regions, along with the periodic maintenance of each vehicle type. The results reveal significant environmental benefits in regions such as the Northeast, where renewable energy sources predominate, reducing the carbon footprint of the electric model, with a carbon footprint of 0.071 kg CO2-eq/kWh. By contrast, the higher carbon intensity of the South’s electricity mix reliant on coal, with a carbon footprint of 0.281 kg CO2-eq/kWh, presents limitations in achieving emissions reductions with electric vehicles. Ethanol, a renewable biofuel in the Brazilian market, demonstrated a 46 % reduction in GHG emissions compared to gasoline. This study contributes to the sustainable mobility discourse, highlighting the critical role of regional energy sources, fuel choices, and sustainable production practices in emissions outcome. These insights support the development of policies encouraging cleaner energy matrices and biofuel use, contributing to Brazil's emissions reduction goals.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Relative contribution and sensitivity analyses for decision-making in the environmental assessment of bio-based phase change materials

  • Da Silva Santos, Humberto
  • Guillen-Lambea, Silvia
This paper aims to investigate the environmental impact of the production of bio-based phase change materials to contribute to the advancement and development of energy systems with a low environmental impact. It uses relative contribution, local, and global sensitivity analysis to target critical inputs for decision-making. The materials selected are jojoba oil, coconut oil, lauric, myristic, and stearic acids, xylitol, and adipic acid, with melting temperatures varying from 14 °C to 152 °C. The methodology follows the ISO guidelines for the life cycle assessment of all materials, for which the boundary system has considered three unit processes: farming, transportation, and manufacturing. It was found that to produce 1 kg of adipic acid, the global warming potential is 13 kg CO2 eq, while for jojoba oil, it is only 0.96 kg CO2 eq. For phase change materials like jojoba oil, coconut oil, myristic acid, and stearic acid, farming dominates the global warming potential, while manufacturing takes over the major share of this environmental indicator for the remaining materials. The local sensitivity analysis results show that jojoba oil's global warming potential can increase by nearly 38 % if irrigation water reaches its upper bound. On the other hand, global sensitivity analysis shows the Sobol index by which inputs contribute to output uncertainty. For instance, the jojoba oil global warming uncertainty could be affected by 60 % by irrigation water. Results show that the higher melting temperature phase change materials have a higher footprint than the lower melting temperature ones, except for coconut oil, as a consequence of more process inputs and production process complexity. Overall, relative contribution analysis helps locate critical unit processes and inputs, while local sensitivity analysis allows for identifying how critical input variation affects the targeted indicator, and the global sensitivity analysis is useful to understand the critical inputs in terms of uncertainty.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Environmental impacts of latent heat thermal energy storage systems

  • Santos, Humberto
  • Lázaro Fernández, Ana
  • Guillen Lambea, Silvia
Latent thermal energy storage integrated into energy systems can be a solution to the intermittency of renewable energies. The objective of this work is to investigate how operational parameters and phase change material properties influence the environmental impacts of thermal energy storage systems through a proposed mathematical correlation, thereby enabling informed decisions in the thermal energy storage sector.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Uncertainty Propagation and Input Sensitivity in Life Cycle Assessment: An Application to Phase Change Materials

  • Santos, Humberto
  • Guillén-Lambea, Silvia
Global and local sensitivity analyses are essential for identifying key parameters in life cycle assessment models. However, due to limited information on parameter uncertainty, they are often overlooked. This paper’s objective is to address this gap by proposing a methodological framework for defining input sensitivity, for midpoint and end point indicators, and a quantitative approach for determining input uncertainties. Applied to a case study on xylitol production as a phase change material, the methodology uses Monte Carlo for uncertainty propagation and Python’s SALib to calculate Sobol indices. Results show a 2% relative error in midpoint indicators, aligning with pedigree matrix methods. While accuracy depends on choosing the appropriate distribution function, both global and local sensitivity analyses showed consistent outcomes. This structured, user-friendly approach offers decision-makers a simplified yet effective way to prioritize inputs, either by verifying multiple indicators individually or focusing on damage-oriented indicators. Future studies could refine database coefficients and explore their influence on overall uncertainty, as well as the nonlinearity of the model if the parameters are correlated, offering opportunities to enhance accuracy.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Data-driven characterization of start-up thermal response for optimal HVAC operation in tertiary buildings

  • García-Monge Rábanos, M.
  • Guillén-Lambea, S.
  • Zalba, B.
This paper presents a methodology for analysing the thermal behaviour of tertiary buildings under intermittent heating schedules aligned with occupancy patterns. The approach aims to enable more efficient, dynamic HVAC operation based on a data-driven model. A central component of the methodology is the characterization of the coupled building-HVAC thermal response upon system activation, determined through a systematic analysis of start-up events from historical sensor data. Validated across 62 buildings and almost 1,500 temperature sensors at the University of Zaragoza during the 2024–2025 heating season (October to April), the analysis revealed substantial variations in thermal response rates, varying tenfold from 0.3 to 3.0 °C/h. This heterogeneity confirms that the existing uniform, campus-wide HVAC schedule is suboptimal and demonstrates the necessity of personalized start-up strategies, according to the distinct thermal dynamics of each building. The results have provided a clearer picture of the combined behaviour of the building, HVAC system, and climate, particularly during the preheating phase. The findings highlight the potential of this data-driven approach to support customized HVAC control strategies to ensure thermal comfort while reducing energy consumption. Crucially, this work addresses the implementation gap frequently reported in the literature, where sophisticated theoretical models remain incompatible with conventional building control systems. By prioritizing empirical validation over simulation, the proposed methodology offers a practical and readily deployable alternative to static, pre-defined control schedules that continue to dominate the existing building stock due to technological inertia.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Rethinking environmental payback: its declining relevance in the decarbonization of the electricity mix

  • Carvalho, M.
  • de Mello Delgado, D. B.
  • Abrahão, R.
  • Guillén-Lambea, S.
This study identifies, discusses and analyzes the most commonly used parameters for the evaluation of energy systems from an environmental perspective. This work provides a critical assessment of the applicability of environmental payback time as a metric for evaluating energy systems, particularly in the context of ongoing decarbonization efforts. A new environmental indicator is proposed, the dynamic payback time, which incorporates the evolution of the emission factor for the electricity grid throughout the operational lifetime of the energy system. The results of two case studies in two countries with dissimilar energy structures and diverse development of electricity generation systems (Brazil and Spain) are presented. A new parameter is presented, the EME parameter (Embodied emissions divided by the electricity Mix Emissions), which can help determine the potential impact of an energy system in the overall energy mix of a country. The results confirm that temporal evolution is a crucial parameter in the environmental assessment of energy systems, concluding that new dynamic parameters are essential for consolidating the findings from environmental studies.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

The Role of Thermal Energy Storage in Enhancing the Robustness of Solar-Thermal-Driven Polygeneration Systems for a Dairy Industry

  • Pina, Eduardo A.
  • Lázaro, Ana
  • Serra, Luis M.
  • Arif, M. Naveed
  • Guillén-Lambea, Silvia
  • Lozano, Miguel A.
Solar thermal-driven polygeneration (STDP) systems represent a promising approach to the production of clean and efficient energy for agri-food industries, with a wide range of temperatures for heating, cooling and power applications. This study conducted a technical, economic, and environmental assessment with particular focus on the role of three different thermal energy storage (TES) systems on the performance of STDP systems consisting of parabolic trough solar collectors, cogeneration Organic Rankine Cycle, auxiliary boiler, and mechanical chiller, to supply heating, cooling, and electricity services to a dairy industry located in Tauste, Spain. The analysis was carried out using a mixed-integer linear programming model that optimizes the selection and sizing of the equipment, as well as its operational performance over a full typical year. In order to evaluate the performance of the proposed system, 833 distinct optimisation cases were solved to study: (i) the role of TES systems located at different points (and corresponding temperature levels) within the plant layout; (ii) the interaction of the proposed system with the power grid; and (iii) sensitivity and robustness analyses based on variations in energy prices. The results showed that the proposed system achieved an annual solar fraction of 37.2%, with slightly lower costs (about 5%) and lower greenhouse gas emissions (about 37%) compared to the conventional supply system. In addition, the relative contribution of the different TES systems was determined, as well as the positive interaction with the power grid, which acted as a “virtual” energy storage system, in improving system performance.