Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Washing machine dynamic model to prevent tub collision during transient state

  • Sánchez-Tabuenca, B.
  • Galé, C.
  • Lladó, J.
  • Albero, C.
  • Latre, R.
In horizontal-axis washing machines, the front gasket as well as the damping system are crucial owing to the possible collision of the tub with the housing during the transient period. However, most dynamic models for predicting tub motion focus on the steady state and consider only the suspension system without including the gasket. We conducted an experimental study to analyze the effect of the gasket on the transient motion of the tub. The results obtained indicate the necessity of implementing the gasket in the multibody model of a washing machine to accurately predict the tub behavior during this period. The gasket model is formed by a combination of Voigt elements. Stiffness parameters are determined using a load cell, and damping factors are estimated using a process that integrates Adams/View, Matlab optimization algorithms, and displacement measurements that are taken using accelerometers. A D-optimal design used to predict the effect of the gasket parameters reveals that the tub displacement is most sensitive to the changes in linear stiffness in the transversal direction. Finally, the model of the gasket provides a better approach for predicting the tub movement during resonance that can be used in the design phase to avoid tub collision.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

On the use of laser-scanning vibrometry for mechanical performance evaluation of 3D printed specimens

  • Medel F.
  • Esteban V.
  • Abad J.
In this study, we explored the suitability of laser-scanning vibrometry (LSV) for evaluation of the mechanical behavior of rectangular prisms produced by Fused Filament Fabrication (FFF). Our hypothesis was that LSV would be able to discriminate the mechanical behavior of specimens fabricated with different process parameters combinations. Build orientation, raster angle, nozzle temperature, printing speed and layer thickness were the process parameters of interest. Based on a factorial design of experiment approach, 48 different process parameter combinations were taken into account and 96 polylactic acid (PLA) rectangular prisms were fabricated. The characterization of their dynamical behavior provided frequency data, making possible the computation of an equivalent elastic modulus metric. Statistical analysis of the equivalent elastic modulus dataset confirmed the significant influences of raster angle, build orientation and nozzle temperature. Moreover, multivariate regression models served to rank, not only the significant influences of individual process parameters, but also the significant quadratic and cubic interactions between them. The previous knowledge was then applied to generate an ad hoc model selecting the most important factors (linear and interactions). The predicted equivalent elastic moduli provided by our ad hoc model were used in modal analysis simulations of both 3D printed rectangular prisms and a complex part. The simulated frequencies thus obtained were generally closer to the experimental ones (=11%), as compared to modal analysis simulations based on internal geometry modelling (=33%). The use of LSV appears very promising in the characterization of the mechanical behavior and integrity of 3D printed parts. Other additive manufacturing technologies may benefit from the use of this technique and from the adoption of the presented methodology to test, simulate and optimize the properties of 3D printed products. © 2021 The Authors
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Stiffness and damping behavior of 3D printed specimens

  • Medel, Francisco
  • Abad, Javier
  • Esteban, Víctor
In this work, we analyzed a variety of metrics derived from Laser Doppler Vibrometry (LDV) characterization of 3D printed rectangular prisms. The metrics of interest were natural frequencies and amplitudes of first and second bending vibration modes, equivalent elastic moduli, damping ratios and areas of transmissibility functions. To explore the influence of printing process parameters on the dynamical behavior and, therefore, on the aforementioned metrics, 48 different combinations were considered, including build orientation, raster angle, nozzle temperature, print speed and layer height as relevant parameters. Thus, 96 polylactic acid (PLA) rectangular prisms were fabricated and LDV characterization was carried out. Based on the equivalent elastic modulus metrics, it was possible to corroborate the influence of printing process parameters on the mechanical performance, being raster angle, build orientation and nozzle temperature the most influential parameters. Likewise, the analysis of damping ratios served to assess the degree of interfilament bonding of 3D printed rectangular prisms. Thus, rectangular prims that exhibited high damping ratios also showed evident lack of adhesion between deposited filaments. Low damping ratios and, therefore, superior interfilament bonding was connected with on edge build orientation, high nozzle temperature (220 °C) and low print speed (60 mm/s) for specimens fabricated using 0° as raster angle. The analyses of areas of transmissibility functions and amplitudes of vibration modes also confirmed a better transmission of excitation (i.e., larger areas and higher amplitudes) for optimally fabricated parts, that is, specimens featuring relatively high equivalent elastic moduli and low damping ratios. Moreover, the application of Classical Laminate Theory to establish the relationships between elastic modulus and damping ratio with raster angle confirmed low temperature (200 °C) and high print speed (120 mm/s) resulted in low elastic modulus a high damping ratios and, therefore, poor interfilament bonding. The present findings confirm LDV is a powerful technique in the characterization of additively manufactured products, being able to discriminate different mechanical behaviors as well as the degree of interfilament bonding. Despite of their simplicity, the metrics derived from LDV characterization represent an attractive tool for both research and industrial applications. © 2022 The Authors