Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A New Multiparameter Model for Multiaxial Fatigue Life Prediction of Rubber Materials

  • Tobajas, R.
  • Elduque, D.
  • Ibarz, E.
  • Javierre, C.
  • Gracia, L.
Most of the mechanical components manufactured in rubber materials experience fluctuating loads, which cause material fatigue, significantly reducing their life. Different models have been used to approach this problem. However, most of them just provide life prediction only valid for each of the specific studied material and type of specimen used for the experimental testing. This work focuses on the development of a new generalized model of multiaxial fatigue for rubber materials, introducing a multiparameter variable to improve fatigue life prediction by considering simultaneously relevant information concerning stresses, strains, and strain energies. The model is verified through its correlation with several published fatigue tests for different rubber materials. The proposed model has been compared with more than 20 different parameters used in the specialized literature, calculating the value of the R-2 coefficient by comparing the predicted values of every model, with the experimental ones. The obtained results show a significant improvement in the fatigue life prediction. The proposed model does not aim to be a universal and definitive approach for elastomer fatigue, but it provides a reliable general tool that can be used for processing data obtained from experimental tests carried out under different conditions.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

On the use of laser-scanning vibrometry for mechanical performance evaluation of 3D printed specimens

  • Medel F.
  • Esteban V.
  • Abad J.
In this study, we explored the suitability of laser-scanning vibrometry (LSV) for evaluation of the mechanical behavior of rectangular prisms produced by Fused Filament Fabrication (FFF). Our hypothesis was that LSV would be able to discriminate the mechanical behavior of specimens fabricated with different process parameters combinations. Build orientation, raster angle, nozzle temperature, printing speed and layer thickness were the process parameters of interest. Based on a factorial design of experiment approach, 48 different process parameter combinations were taken into account and 96 polylactic acid (PLA) rectangular prisms were fabricated. The characterization of their dynamical behavior provided frequency data, making possible the computation of an equivalent elastic modulus metric. Statistical analysis of the equivalent elastic modulus dataset confirmed the significant influences of raster angle, build orientation and nozzle temperature. Moreover, multivariate regression models served to rank, not only the significant influences of individual process parameters, but also the significant quadratic and cubic interactions between them. The previous knowledge was then applied to generate an ad hoc model selecting the most important factors (linear and interactions). The predicted equivalent elastic moduli provided by our ad hoc model were used in modal analysis simulations of both 3D printed rectangular prisms and a complex part. The simulated frequencies thus obtained were generally closer to the experimental ones (=11%), as compared to modal analysis simulations based on internal geometry modelling (=33%). The use of LSV appears very promising in the characterization of the mechanical behavior and integrity of 3D printed parts. Other additive manufacturing technologies may benefit from the use of this technique and from the adoption of the presented methodology to test, simulate and optimize the properties of 3D printed products. © 2021 The Authors
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

European database of explanted UHMWPE liners from total joint replacements: correlations among polymer modifications, structure, oxidation, mechanical properties and lifetime in vivo

  • Slouf, Miroslav
  • Gajdosova, Veronika
  • Dybal, Jiri
  • Sticha, Roman
  • Fulin, Petr
  • Pokorny, David
  • Mateo, Jesús
  • Panisello, Juan José
  • Canales, Vicente
  • Medel, Francisco
  • Bistolfi, Alessandro
  • Bracco, Pierangiola
This contribution lays the foundation for the European database of explanted UHMWPE liners from total joint replacements. Three EU countries (Czech Republic, Italy and Spain) have joined their datasets containing anonymized patient data (such as age and BMI), manufacturer data (such as information on UHMWPE crosslinking, thermal treatment and sterilization), orthopedic evaluation (such as total duration of the implant in vivo and reasons for its revision) and material characterization (such as oxidative degradation and micromechanical properties). The joined database contains more than 500 entries, exhibiting gradual growth, and it is beginning to show interesting trends, which are discussed in our contribution, including (i) strong correlations between UHMWPE oxidative degradation, degree of crystallinity and microhardness; (ii) statistically significant differences between UHMWPE liners with different types of sterilization; (iii) realistic correlations between the extent of oxidative degradation and the observed reasons for total joint replacement failures. Our final objective and task for the future is to continuously expand the database, involving researchers from other European countries, in order to create a robust tool that will contribute to the better understanding of structure–properties–performance relationships in the field of arthroplasty implants.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Stiffness and damping behavior of 3D printed specimens

  • Medel, Francisco
  • Abad, Javier
  • Esteban, Víctor
In this work, we analyzed a variety of metrics derived from Laser Doppler Vibrometry (LDV) characterization of 3D printed rectangular prisms. The metrics of interest were natural frequencies and amplitudes of first and second bending vibration modes, equivalent elastic moduli, damping ratios and areas of transmissibility functions. To explore the influence of printing process parameters on the dynamical behavior and, therefore, on the aforementioned metrics, 48 different combinations were considered, including build orientation, raster angle, nozzle temperature, print speed and layer height as relevant parameters. Thus, 96 polylactic acid (PLA) rectangular prisms were fabricated and LDV characterization was carried out. Based on the equivalent elastic modulus metrics, it was possible to corroborate the influence of printing process parameters on the mechanical performance, being raster angle, build orientation and nozzle temperature the most influential parameters. Likewise, the analysis of damping ratios served to assess the degree of interfilament bonding of 3D printed rectangular prisms. Thus, rectangular prims that exhibited high damping ratios also showed evident lack of adhesion between deposited filaments. Low damping ratios and, therefore, superior interfilament bonding was connected with on edge build orientation, high nozzle temperature (220 °C) and low print speed (60 mm/s) for specimens fabricated using 0° as raster angle. The analyses of areas of transmissibility functions and amplitudes of vibration modes also confirmed a better transmission of excitation (i.e., larger areas and higher amplitudes) for optimally fabricated parts, that is, specimens featuring relatively high equivalent elastic moduli and low damping ratios. Moreover, the application of Classical Laminate Theory to establish the relationships between elastic modulus and damping ratio with raster angle confirmed low temperature (200 °C) and high print speed (120 mm/s) resulted in low elastic modulus a high damping ratios and, therefore, poor interfilament bonding. The present findings confirm LDV is a powerful technique in the characterization of additively manufactured products, being able to discriminate different mechanical behaviors as well as the degree of interfilament bonding. Despite of their simplicity, the metrics derived from LDV characterization represent an attractive tool for both research and industrial applications. © 2022 The Authors