Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Assessment of gradient-based algorithm for surface determination in multi-material gap measurements by x ray computed tomography

  • Jiménez Pacheco, R.
  • Ontiveros, S.
  • Yagüe Fabra, J. A
  • Zanini, F.
  • Carmignato, S.
  • Albajez, J.A.
XX-ray computed tomography is one of the most promising measurement techniques for the dimensional evaluation of industrial components. However, the inherent complexity of this technology also involves important challenges. One of them is to develop surface determination algorithms capable of providing measurement results with better accuracy in any situation—for example, for single and multi-material parts, inner and outer geometries, with and without image artefacts, etc.—and reducing user influence. The surface determination is particularly complex in the case of multi-material parts, especially when they are separated by small air gaps. In previous works, two gradient-based algorithms were presented, that showed less measurement variability throughout the whole part, and reduced the computational cost and operator influence compared to threshold-based algorithms. This work focuses on the evaluation of the performance of these algorithms when used in a scenario so complex that parts of it are made of one or more materials (metal–metal and polymer–metal) with gaps inside. For this purpose, a set of multi-material reference standards is used. The presented gradient-based algorithms show measurement errors comparable to commercial threshold-based algorithms, but with the capability of obtaining accurate measurements in smaller gaps, apart from reducing the user influence on the measurement process.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Reference standard for the uncertainty estimation of X–ray Computed Tomography measurements of complex macro-and micro-geometries

  • Albajez, J.A.
  • Nuño, S.
  • Díaz, L.C.
  • Gallardo, D.
  • Yagüe, J.A.
  • Jiménez, R.
  • Torralba, M.
Traditionally, measuring both macro and micro geometries with a single device has been challenging in metrology. Coordinate Measuring Machines (CMM) are common devices for the inspection of large features, while optical microscopes can achieve resolutions in the order of micrometers in small areas. X-Ray Computed Tomography (XCT) has become a solution not only to characterize both micro and macro geometries, but also to inspect internal features without destroying the sample. In this field, various reference standards have been developed in order to verify the capabilities of XCT systems, these artefacts include geometrical features or profiles for roughness inspection. This paper shows the design and develompent of a reference standard for XCT test which includes internal and external geometrical features and profiles for macro and micro geometrical inspection. The model is manufactured by additive manufacturing (AM), easing the process of fabrication of the artefact and allowing to test the capabilities of this technology to produce reference standards.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

From lean production to lean 4.0: a systematic literature review with a historical perspective

  • Gil-Vilda, F.
  • Yagüe-Fabra, J. A.
  • Sunyer, A.
Over recent decades, the increasing competitiveness of markets has propagated the term “lean” to describe the management concept for improving productivity, quality, and lead time in industrial as well as services operations. Its overuse and linkage to different specifiers (surnames) have created confusion and misunderstanding as the term approximates pragmatic ambiguity. Through a systematic literature review, this study takes a historical perspective to analyze 4962 papers and 20 seminal books in order to clarify the origin, evolution, and diversification of the lean concept. Our main contribution lies in identifying 17 specifiers for the term “lean” and proposing four mechanisms to explain this diversification. Our research results are useful to both academics and practitioners to return to the Lean origins in order to create new research areas and conduct organizational transformations based on solid concepts. We conclude that the use of “lean” as a systemic thinking is likely to be further extended to new research fields.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Uncertainty budget of a large-range nanopositioning platform based on Monte Carlo simulation

  • Díaz-Pérez, L.C.
  • Torralba, M.
  • Muro, L.
  • Albajez, J.A.
  • Yagüe-Fabra, J.A.
The objective of precision systems design is to obtain machines with very high and totally predictable work-zone accuracies. In already functional systems, where the errors can be measured, this is achieved by error correction and compensation. The aim of this work is to propose an uncertainty budget methodology to obtain the final measuring uncertainty of precise measuring systems, after error compensation. The case study is a nanopositioning platform, referred as NanoPla, with a confocal sensor integrated as measuring instrument. The NanoPla performs precise positioning in a large range of 50 mm × 50 mm, and its target is surface topography characterization, at a submicrometre scale. After performing the uncertainty budget of the NanoPla, Monte Carlo method is used to obtain the final measuring uncertainty along the whole NanoPla working range, considering all the casuistry. By studying the results, the authors are able to propose solutions to minimize the final measuring uncertainty.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Study on lt accuracy improvement by calibration based on network measurements

  • Velázquez J.
  • Conte J.
  • Majarena A.C.
  • Santolaria J.
Laser trackers (LT) are widely used to calibrate other machines. Nevertheless, very little is known about calibrating an LT. There are some standards that allow us to evaluate the LT per-formance. However, they require specialized equipment. A calibration procedure to improve the LT accuracy in an easy and fast way is presented in this paper. This method is based on network measurements where a set of reflectors were measured from different LT positions in a working environment. The methodology proposed deal with the lack of nominal data of the reflector mesh. A measurement scenario was defined, based on error parameter dependence on distances and an-gles, thus, obtaining those positions more sensitive to errors. The influence of the incidence angle of the laser beam on the reflector was characterized, revealing that its contribution to the LT measurement error can be up to 13 µm. Error kinematic parameters were identified to provide the optimum value of an objective function, where the reflector mesh nominal data were unknown. The calibration procedure was validated with nominal data, by measuring a set of reflectors located on a coordinate measuring machine. The findings of this study suggested that the LT accuracy can be improved up to 25%. Moreover, the method can be carried out by the LT user without requiring specialized equipment.