Pasar al contenido principal

DISEÑO DE TECNOLOGIAS INTEGRADAS RECONFIGURABLES DE MICROONDAS CON MEMS DE RF

TEC2013-48102-C2-1-P

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D (Excelencia / Generación de Conocimiento)
Año convocatoria 2013
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 16
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A 125-143-GHz frequency-reconfigurable BiCMOS compact LNA using a single RF-MEMS switch

  • Heredia, Julio
  • Ribó i Pal, Miquel
  • Pradell i Cara, Lluís|||0000-0003-4026-226X
  • Wipf, Selin Tolunay
  • Göritz, Alexander
  • Wipf, Christian
  • Kaynak, Mehmet
© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., In this letter, a 125-143-GHz frequency-reconfigurable BiCMOS compact low-noise amplifier (LNA) is presented for the first time. It consists of two cascode stages and was fabricated using a 0.13-µm SiGe:C BiCMOS process, which integrates RF-MEMS switches. A systematic general design procedure to obtain a balanced gain and noise figure in both frequency states is proposed. The LNA size is minimized by using only one RF-MEMS switch to select the frequency band and a multimodal three-line microstrip structure in the input matching network. The measured gain and noise figure are 18.2/16.1 and 7/7.7 dB at 125/143 GHz. The power consumption is 36.8 mW. The measured results are in good agreement with simulations., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Design and test of resonators using PiezoMUMPS technology

  • Pons Nin, Joan|||0000-0002-0356-5678
  • Gorreta Mariné, Sergio
  • Domínguez Pumar, Manuel|||0000-0001-5439-7953
  • Blokhina, Elena
  • O'Connell, D.
  • Feely, Orla
© 2015 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., This paper presents preliminary results obtained with devices fabricated with the new PiezoMUMPS process. Since these devices will be used as resonators in applications based on Pulsed Digital Oscillators, we analyze, both with simulations and measurements, the mechanical vibration modes that can be excited and detected. We also introduce a specific version of PDO for piezoelectric MEMS., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Compact fully uniplanar bandstop filter based on slow-wave multimodal CPW resonators

  • Contreras Bleda, Adrián
  • Ribó i Pal, Miquel
  • Pradell i Cara, Lluís|||0000-0003-4026-226X
  • Raynal, Víctor
  • Moreno, Ignacio
  • Combes, Maxence
  • Ten, Milena
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., In this letter, a compact, fully uniplanar bandstop filter is presented. It is based on multimodal coplanar waveguide resonators implemented using a slow-wave periodic structure that greatly reduces the filter’s horizontal dimension. A multimodal circuit model for the filter is proposed and experimentally validated. A second-order filter prototype at 1.9 GHz, with a compact size of 0.31¿g×0.19¿g , was designed and fabricated. The filter features measured fractional bandwidths of 9.3% and 3.7% for -20- and -30-dB rejection levels, respectively, and a 1.3-dB insertion loss in the passband., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

High-efficiency reconfigurable dual-band class-F power amplifier with harmonic control network using MEMS

  • Gilasgar, Mitra
  • Barlabe Dalmau, Antoni|||0000-0002-1176-1329
  • Pradell i Cara, Lluís|||0000-0003-4026-226X
©2020 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., This letter presents a novel reconfigurable, high-efficiency class-F power amplifier (PA) structure, using a commercial GaN-HEMT, that achieves dual-band configuration not only at the fundamental frequency but also at the harmonics. With a proper harmonic tuning structure, the need for an extra filtering section is eliminated, resulting in a high dual-band efficiency with a reduced number of components and size. The reconfigurable structure uses commercial singlepole-double-throw (SPDT) and single-pole-single-throw (SPST) MEMS switches optimally placed on the stubs to select between 900 and 1800 MHz. The reconfigurable PA achieves a measured power-added efficiency (PAE) of 69.5% and a power gain of 13.6 dB while delivering an output power of 39.1 dBm at 900 MHz. At 1800 MHz, the amplifier achieves a PAE of 57.9%, a power gain of 10.5 dB, and an output power of 38.5 dBm., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Closed-loop compensation of dielectric charge induced by ionizing radiation

  • Domínguez Pumar, Manuel|||0000-0001-5439-7953
  • Gorreta Mariné, Sergio
  • Pons Nin, Joan|||0000-0002-0356-5678
  • Gomez Rodriguez, Faustino
  • Gonzalez Castaño, Diego
  • Muschitiello, Michele
This letter investigates the capability of dielectric charge control loops to cope with charge induced by ionizing radiation. To this effect, an microelectromechanical systems (MEMS) variable capacitor has been irradiated with X-rays and gamma-radiation in three scenarios: 1) without polarization; 2) using an open-loop dielectric charge mitigation strategy; and 3) using a closed-loop control method. The results show that the charge effects induced by radiation can be partially compensated using dielectric charge control., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A 2.4 GHz CMOS class-F power amplifier with reconfigurable load-impedance matching

  • Gilasgar, Mitra
  • Barlabe Dalmau, Antoni|||0000-0002-1176-1329
  • Pradell i Cara, Lluís|||0000-0003-4026-226X
© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., A novel reconfigurable CMOS class-F power amplifier (PA) at 2.4 GHz is proposed in this paper. It is able to match the output load variations mainly due to the effect of hand and head on a mobile phone. The effect of load variation on power-added efficiency (PAE), output power, and distortion is compensated by reconfiguring the output network using an impedance tuner. The tuner controls the output matching at fundamental frequency without affecting the class-F harmonic tuning up to 3rd harmonic. To the best of our knowledge, this is the first design of a CMOS class-F PA addressed to compensate the effect of load variation. Measurement results for 50 ohm load impedance show a maximum PAE of 26% and maximum output power of 19.2 dBm. The measured total harmonic distortion is 4.9%. Measurement results for load values other than 50 ohm show that PAE increases from 6.5% (not-tuned PA) up to 19.9% (tuned PA) with the same output power (19.2 dBm). Tuning also reduces the adjacent-channel leakage ratio by 5 dB and the spectral regrowth of a Wi-Fi signal at the PA output. The size of the fabricated chip is 1.6 mm × 1.6 mm., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Model identification of time-varying diffusive systems

  • Atienza García, María Teresa
  • Kowalski, Lukasz
  • Gorreta Mariné, Sergio
  • Pons Nin, Joan|||0000-0002-0356-5678
  • Jiménez Serres, Vicente|||0000-0001-5668-7049
  • Domínguez Pumar, Manuel|||0000-0001-5439-7953
This paper presents a characterization method based on diffusive representation for a class of linear or nonlinear time-varying diffusive systems. The system variation with time may come as a result of the own actuation over the device or as a result of an external disturbance. Experimental results for both cases are presented. This method has been tested on a prototype of the REMS thermal wind anemometer for Mars atmosphere in which the time variation is induced by wind changes in a wind tunnel. The same method is also applied to model the nonlinear charge trapping dynamics of a contactless MEMS capacitor, in which the system variation with time comes from the nonlinear dependence on the applied voltages. In both cases, the obtained state-space models are able to reproduce and predict the behavior of the devices under arbitrary excitations., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Compact, wideband impedance tuner using a three-line-microstrip structure

  • Heredia Vega, Julio César
  • Ribó Pal, Miquel
  • Pradell i Cara, Lluís|||0000-0003-4026-226X
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., A novel three-line-microstrip compact impedance tuner is presented. It is based on a multimodal structure wherein six variable capacitances, implemented with two parallel-connected varactors each, create multiple interactions among the three-line-microstrip modes in a reduced circuit area. Experimental results show better-than-70% coverage of the Smith chart in an 85% frequency bandwidth from 1.4 to 3.2 GHz., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

High-efficiency reconfigurable dual-band class-F power amplifier with harmonic control network using MEMS

  • Gilasgar, Mitra
  • Barlabe Dalmau, Antoni
  • Pradell i Cara, Lluís
©2020 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., This letter presents a novel reconfigurable, high-efficiency class-F power amplifier (PA) structure, using a commercial GaN-HEMT, that achieves dual-band configuration not only at the fundamental frequency but also at the harmonics. With a proper harmonic tuning structure, the need for an extra filtering section is eliminated, resulting in a high dual-band efficiency with a reduced number of components and size. The reconfigurable structure uses commercial singlepole-double-throw (SPDT) and single-pole-single-throw (SPST) MEMS switches optimally placed on the stubs to select between 900 and 1800 MHz. The reconfigurable PA achieves a measured power-added efficiency (PAE) of 69.5% and a power gain of 13.6 dB while delivering an output power of 39.1 dBm at 900 MHz. At 1800 MHz, the amplifier achieves a PAE of 57.9%, a power gain of 10.5 dB, and an output power of 38.5 dBm., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A 2.4 GHz CMOS class-F power amplifier with reconfigurable load-impedance matching

  • Gilasgar, Mitra
  • Barlabe Dalmau, Antoni
  • Pradell i Cara, Lluís
© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., A novel reconfigurable CMOS class-F power amplifier (PA) at 2.4 GHz is proposed in this paper. It is able to match the output load variations mainly due to the effect of hand and head on a mobile phone. The effect of load variation on power-added efficiency (PAE), output power, and distortion is compensated by reconfiguring the output network using an impedance tuner. The tuner controls the output matching at fundamental frequency without affecting the class-F harmonic tuning up to 3rd harmonic. To the best of our knowledge, this is the first design of a CMOS class-F PA addressed to compensate the effect of load variation. Measurement results for 50 ohm load impedance show a maximum PAE of 26% and maximum output power of 19.2 dBm. The measured total harmonic distortion is 4.9%. Measurement results for load values other than 50 ohm show that PAE increases from 6.5% (not-tuned PA) up to 19.9% (tuned PA) with the same output power (19.2 dBm). Tuning also reduces the adjacent-channel leakage ratio by 5 dB and the spectral regrowth of a Wi-Fi signal at the PA output. The size of the fabricated chip is 1.6 mm × 1.6 mm., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Model identification of time-varying diffusive systems

  • Atienza García, María Teresa
  • Kowalski, Lukasz
  • Gorreta Mariné, Sergio
  • Pons Nin, Joan
  • Jiménez Serres, Vicente
  • Domínguez Pumar, Manuel
This paper presents a characterization method based on diffusive representation for a class of linear or nonlinear time-varying diffusive systems. The system variation with time may come as a result of the own actuation over the device or as a result of an external disturbance. Experimental results for both cases are presented. This method has been tested on a prototype of the REMS thermal wind anemometer for Mars atmosphere in which the time variation is induced by wind changes in a wind tunnel. The same method is also applied to model the nonlinear charge trapping dynamics of a contactless MEMS capacitor, in which the system variation with time comes from the nonlinear dependence on the applied voltages. In both cases, the obtained state-space models are able to reproduce and predict the behavior of the devices under arbitrary excitations., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A 125-143-GHz frequency-reconfigurable BiCMOS compact LNA using a single RF-MEMS switch

  • Heredia, Julio
  • Ribó i Pal, Miquel
  • Pradell i Cara, Lluís
  • Wipf, Selin Tolunay
  • Göritz, Alexander
  • Wipf, Christian
  • Kaynak, Mehmet
© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., In this letter, a 125-143-GHz frequency-reconfigurable BiCMOS compact low-noise amplifier (LNA) is presented for the first time. It consists of two cascode stages and was fabricated using a 0.13-µm SiGe:C BiCMOS process, which integrates RF-MEMS switches. A systematic general design procedure to obtain a balanced gain and noise figure in both frequency states is proposed. The LNA size is minimized by using only one RF-MEMS switch to select the frequency band and a multimodal three-line microstrip structure in the input matching network. The measured gain and noise figure are 18.2/16.1 and 7/7.7 dB at 125/143 GHz. The power consumption is 36.8 mW. The measured results are in good agreement with simulations., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Design and test of resonators using PiezoMUMPS technology

  • Pons Nin, Joan
  • Gorreta Mariné, Sergio
  • Domínguez Pumar, Manuel
  • Blokhina, Elena
  • O'Connell, D.
  • Feely, Orla
© 2015 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., This paper presents preliminary results obtained with devices fabricated with the new PiezoMUMPS process. Since these devices will be used as resonators in applications based on Pulsed Digital Oscillators, we analyze, both with simulations and measurements, the mechanical vibration modes that can be excited and detected. We also introduce a specific version of PDO for piezoelectric MEMS., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Compact, wideband impedance tuner using a three-line-microstrip structure

  • Heredia Vega, Julio César
  • Ribó Pal, Miquel
  • Pradell i Cara, Lluís
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., A novel three-line-microstrip compact impedance tuner is presented. It is based on a multimodal structure wherein six variable capacitances, implemented with two parallel-connected varactors each, create multiple interactions among the three-line-microstrip modes in a reduced circuit area. Experimental results show better-than-70% coverage of the Smith chart in an 85% frequency bandwidth from 1.4 to 3.2 GHz., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Compact fully uniplanar bandstop filter based on slow-wave multimodal CPW resonators

  • Contreras Bleda, Adrián
  • Ribó i Pal, Miquel
  • Pradell i Cara, Lluís
  • Raynal, Víctor
  • Moreno, Ignacio
  • Combes, Maxence
  • Ten, Milena
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., In this letter, a compact, fully uniplanar bandstop filter is presented. It is based on multimodal coplanar waveguide resonators implemented using a slow-wave periodic structure that greatly reduces the filter’s horizontal dimension. A multimodal circuit model for the filter is proposed and experimentally validated. A second-order filter prototype at 1.9 GHz, with a compact size of 0.31¿g×0.19¿g , was designed and fabricated. The filter features measured fractional bandwidths of 9.3% and 3.7% for -20- and -30-dB rejection levels, respectively, and a 1.3-dB insertion loss in the passband., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Closed-loop compensation of dielectric charge induced by ionizing radiation

  • Domínguez Pumar, Manuel
  • Gorreta Mariné, Sergio
  • Pons Nin, Joan
  • Gomez Rodriguez, Faustino
  • Gonzalez Castaño, Diego
  • Muschitiello, Michele
This letter investigates the capability of dielectric charge control loops to cope with charge induced by ionizing radiation. To this effect, an microelectromechanical systems (MEMS) variable capacitor has been irradiated with X-rays and gamma-radiation in three scenarios: 1) without polarization; 2) using an open-loop dielectric charge mitigation strategy; and 3) using a closed-loop control method. The results show that the charge effects induced by radiation can be partially compensated using dielectric charge control., Peer Reviewed, Postprint (author's final draft)