Pasar al contenido principal

METODOLOGIA DE DISEÑO DE TRANSCEPTORES CMOS PARA REDES IOT

TEC2017-85867-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE ZARAGOZA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 18
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A new simple technique for improving the random properties of chaos-based cryptosystems

  • Garcia-Bosque, M.
  • Pérez-Resa, A.
  • Sánchez-Azqueta, C.
  • Celma, S.
A new technique for improving the security of chaos-based stream ciphers has been proposed and tested experimentally. This technique manages to improve the randomness properties of the generated keystream by preventing the system to fall into short period cycles due to digitation. In order to test this technique, a stream cipher based on a Skew Tent Map algorithm has been implemented on a Virtex 7 FPGA. The randomness of the keystream generated by this system has been compared to the randomness of the keystream generated by the same system with the proposed randomness-enhancement technique. By subjecting both keystreams to the National Institute of Standards and Technology (NIST) tests, we have proved that our method can considerably improve the randomness of the generated keystreams. In order to incorporate our randomness-enhancement technique, only 41 extra slices have been needed, proving that, apart from effective, this method is also efficient in terms of area and hardware resources.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Analysis of mismatch impact on image rejection ratio for passive polyphase filters

  • Martinez-Perez, A.D.
  • Aznar, F.
  • Royo, G.
  • Sanchez-Azqueta, C.
  • Celma, S.
Passive polyphase filters (PPFs) are useful symmetric RC networks for processing analog quadrature signals. Passive polyphase filters are also used to implement differential-quadrature or quadrature-differential converters. The quality of these quadrature signals is essential to achieve good performance in modern communication systems. However, mismatch effects can produce notable degradation in the PPF frequency response, and this results in an important reduction in quadrature signal quality, being amplitude balance and phase offset notably affected. Both these errors could be summarized and evaluated together considering image rejection ratio as a figure of merit. This work deepens in the analysis of mismatch impact on PPF, studying image rejection ratio degradation for 2 PPF types, and a systematic method is proposed to obtain the worst case of mismatch in PPFs with any number of stages. It has been validated in a 65-nm CMOS technology.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A highly linear low-noise transimpedance amplifier for indoor fiber-wireless remote antenna units

  • Royo, Guillermo
  • Martinez-Perez, Antonio D.
  • Sanchez-Azqueta, Carlos
  • Aldea, Concepción
  • Celma, Santiago
This article presents an optimized design of a low-noise transimpedance amplifier (TIA) with high linearity for use in the downlink receiver of a remote antenna unit (RAU). The aim of this design is to be used in a cost-effective indoor distributed antenna system (DAS) for WLAN transmission using a mixed fiber-wireless system. The circuit topology consists of a fully differential shunt-shunt feedback TIA with digitally programmable transimpedance. An open-loop gain compensation technique is used to maintain stability and constant bandwidth (BW). The TIA has been fabricated in 65 nm CMOS technology with a 1.2 V voltage supply. The total power consumption of the TIA is 6 mW. A complete electrical and optical characterization with a 1550 nm PIN photodiode has been performed to demonstrate the reliable 54 Mb/s 802.11a WLAN transmission achieved with an error vector magnitude (EVM) lower than 3% for a 20 dB optical input range.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Chaotic Encryption for 10-Gb Ethernet Optical Links

  • Perez-Resa, A.
  • Garcia-Bosque, M.
  • Sanchez-Azqueta, C.
  • Celma, S.
In this paper, a new physical layer encryption method for optical 10-Gb Ethernet links is proposed. Necessary modifications to introduce encryption in Ethernet 10GBase-R standard have been considered. This security enhancement has consisted of a symmetric streaming encryption of the 64b/66b data flow at physical coding sublayer level thanks to two keystream generators based on a chaotic algorithm. The overall system has been implemented and tested in a field programmable gate array. Ethernet traffic has been encrypted, transmitted, and decrypted over a multimode optical link. Experimental results are analyzed concluding that it is possible to cipher traffic at this level and hide the complete Ethernet traffic pattern from any passive eavesdropper. In addition, no overhead is introduced during encryption, getting no losses in the total throughput.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Chaos-Based Bitwise Dynamical Pseudorandom Number Generator on FPGA

  • Garcia-Bosque, M.
  • Perez-Resa, A.
  • Sanchez-Azqueta, C.
  • Aldea, C.
  • Celma, S.
In this paper, a new pseudorandom number generator (PRNG) based on the logistic map has been proposed. To prevent the system to fall into short period orbits as well as increasing the randomness of the generated sequences, the proposed algorithm dynamically changes the parameters of the chaotic system. This PRNG has been implemented in a Virtex 7 field-programmable gate array (FPGA) with a 32-bit fixed point precision, using a total of 510 lookup tables (LUTs) and 120 registers. The sequences generated by the proposed algorithm have been subjected to the National Institute of Standards and Technology (NIST) randomness tests, passing all of them. By comparing the randomness with the sequences generated by a raw 32-bit logistic map, it is shown that, by using only an additional 16% of LUTs, the proposed PRNG obtains a much better performance in terms of randomness, increasing the NIST passing rate from 0.252 to 0.989. Finally, the proposed bitwise dynamical PRNG is compared with other chaos-based realizations previously proposed, showing great improvement in terms of resources and randomness.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A 1 Gbps Chaos-Based Stream Cipher Implemented in 0.18 m CMOS Technology

  • Garcia-Bosque, M.
  • Diez-Señorans, G.
  • Pérez-Resa, A.
  • Sánchez-Azqueta, C.
  • Aldea, C.
  • Celma, S.
In this work, a novel chaos-based stream cipher based on a skew tent map is proposed and implemented in a 0.18 µm CMOS (Complementary Metal-Oxide-Semiconductor) technology. The proposed ciphering algorithm uses a linear feedback shift register that perturbs the orbits generated by the skew tent map after each iteration. This way, the randomness of the generated sequences is considerably improved. The implemented stream cipher was capable of achieving encryption speeds of 1 Gbps by using an approximate area of ~20,000 2-NAND equivalent gates, with a power consumption of 24.1 mW. To test the security of the proposed cipher, the generated keystreams were subjected to National Institute of Standards and Technology (NIST) randomness tests, proving that they were undistinguishable from truly random sequences. Finally, other security aspects such as the key sensitivity, key space size, and security against reconstruction attacks were studied, proving that the stream cipher is secure.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A reconfigurable radio-frequency converter IC in 0.18 µm CMOS

  • Sánchez-Azqueta, Carlos
  • Guerrero, Erick
  • Gimeno, Cecilia
  • Celma, Santiago
This work presents a reconfigurable RF converter for DVB-T television applications using triple-play over GPON. The system takes the DVB-T input, a wavelength division multiplexing (WDM) signal with spectral inversion in the range from 47 MHz to 1000 MHz, up-converts its frequency to the band-pass of a highly selective surface-acoustic wave (SAW) filter centered at 1.3 GHz, and then down-converts it so that it is compatible with the antenna input of conventional television sets. The designed RF converter incorporates two pairs of frequency synthesizer and mixer, based, respectively, on an integer-N phase-locked loop (PLL) with two LC-tank VCOs with 128 coarse tuning bands in the range from 1.35 GHz to 2.7 GHz, and a double-balanced Gilbert cell, modified for better impedance matching and improved linearity. It is fed with regulated supplies compensated in temperature and programmed by an I2 C interface operating on five 16-bit registers. This work presents the experimental characterization of the whole system plus selected cells for stand-alone testing, which have been fabricated in a 0.18 µm CMOS process.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Self-synchronized Encryption for Physical Layer in 10Gbps Optical Links

  • Perez, A.
  • Garcia-Bosque, M.
  • Sanchez-Azqueta, C.
  • Celma, S.
In this work a new self-synchronized encryption method for 10 Gigabit optical links is proposed and developed. Necessary modifications to introduce this kind of encryption in physical layers based on 64b/66b encoding, such as 10GBase-R, have been considered. The proposed scheme encrypts directly the 64b/66b blocks by using a symmetric stream cipher based on an FPE (Format Preserving Encryption) block cipher operating in PSCFB (Pipelined Statistical Cipher Feedback) mode. One of the main novelties in this paper is the security analysis done for this mode. For the first time, an expression for the IND-CPA (Indistinguishability under Chosen-Plaintext Attack) advantage of any adversary over this scheme has been derived. Moreover, it has been concluded that this mode can be considered secure in the same way of traditional modes are. In addition, the overall system has been simulated and implemented in an FPGA (Field Programmable Gate Array). An encrypted optical link has been tested with Ethernet data frames, concluding that it is possible to cipher traffic at this level, getting maximum throughput and hiding traffic pattern from passive eavesdroppers.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A new method for format preserving encryption in high-data rate communications

  • Perez-Resa, Adrián
  • Garcia-Bosque, Miguel
  • Sanchez-Azqueta, Carlos
  • Celma, Santiago
In some encryption systems it is necessary to preserve the format and length of the encrypted data. This kind of encryption is called FPE (Format Preserving Encryption). Currently, only two AES (Advanced Encryption Standard) modes of operation recommended by the NIST (National Institute of Standards and Technology) are able to implement FPE algorithms, FF1 and FF3. These modes work in an electronic codebook fashion and can be configured to encrypt databases with an arbitrary format and length. However, there are no stream cipher proposals able to implement FPE encryption for high data rate information flows. The main novelty of this work is a new block cipher operation mode proposal to implement an FPE algorithm in a stream cipher fashion. It has been called CTR-MOD and it is based on a standard block cipher working in CTR (Counter) mode and a modulo operation. The confidentiality of this mode is analyzed in terms of its IND- CPA (Indistinguishability under Chosen Plaintext Attack) advantage of any adversary attacking it. Moreover, the encryption scheme has been implemented on an FPGA (Field Programmable Gate Array) and has been integrated in a Gigabit Ethernet interface to test an encrypted optical link with a real high data rate traffic flow.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Self-Synchronized Encryption for Physical Layer in Gigabit Ethernet Optical Links

  • Perez-Resa, A.
  • Garcia-Bosque, M.
  • Sanchez-Azqueta, C.
  • Celma, S.
In this work a new self-synchronized symmetric encryption solution for high speed communication systems necessary to preserve the format of the plaintext is proposed, developed and tested. This new encryption mechanism is based on the block cipher operation mode called PSCFB (Pipelined Statistical Cipher Feedback) and the modulo operation. The confidentiality of this mode is analyzed in terms of its IND-CPA (Indistinguishability under Chosen-Plaintext Attack) advantage, concluding that it can be considered secure in the same way as traditional modes are. The encryption system has been integrated in the physical layer of a 1000Base-X Gigabit Ethernet Interface, where the 8b/10b symbol flow is encrypted at line rate. Moreover, an implementation of the proposed system has been carried out in an FPGA (Field Programmable Gate Array) device. Finally, an encrypted optical link has been tested with real Ethernet frames, getting maximum throughput and protecting the data traffic from passive eavesdroppers.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Proposal and Analysis of a Novel Class of PUFs Based on Galois Ring Oscillators

  • Garcia-Bosque, M.
  • Diez-Senorans, G.
  • Sanchez-Azqueta, C.
  • Celma, S.
In this article, the possibility of using Galois ring oscillators to construct physically unclonable functions (PUFs) has been studied. The idea is to use novel PUF architectures, similar as the ring oscillator PUFs that, instead of comparing frequencies, compare the statistical bias of pairs of oscillators implemented in different locations. To study the viability of these systems, three different Galois oscillators have been implemented in several locations in several FPGAs and we have studied the main properties of their bias: repeatability, variability with the location, variability with the FPGA and spatial autocorrelation. Based on this study, we have determined that the bias of these oscillators meet the requirements that are needed to be used to construct a PUF. Finally, a PUF based on comparing the bias of neighboring 7-LUT Galois ring oscillators have been implemented and analyzed. The experimental results show that this PUF generates uniform responses that are highly reproducible and unique, making this PUF suitable for being used in identification applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Radio over fiber: An alternative broadband network technology for Iot

  • Paredes-Páliz, D.F.
  • Royo, G.
  • Aznar, F.
  • Aldea, C.
  • Celma, S.
Wireless broadband access networks have been positioning themselves as a good solution for manufacturers and users of IoT (internet of things) devices, due mainly to the high data transfer rate required over terminal devices without restriction of information format. In this work, a review of two Radio over Fiber strategies is presented. Both have excellent performance and even offer the possibility to extend wireless area coverage where mobile networks do not reach or the 802.11 network presents issues. Radio Frequency over Fiber (RFoF) and intermediate Frequency over Fiber (IFoF) are two transmission strategies compatible with the required new broadband services and both play a key role in the design of the next generation integrated optical–wireless networks, such as 5G and Satcom networks, including on RAU (Remote Antenna Unit) new functionalities to improve their physical dimensions, employing a microelectronic layout over nanometric technologies.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Analysis of Non-Idealities on CMOS Passive Mixers

  • Martínez Pérez, Antonio Dionisio
  • Aznar, Francisco
  • Royo, Guillermo
  • Celma, Santiago
In the current state of the art, WiFi-alike standards require achieving a high Image Rejection Ratio (IRR) while having low power consumption. Thus, quadrature structures based on passive ring mixers offer an attractive and widely used solution, as they can achieve a high IRR while being a passive block. However, it is not easy for the designer to know when a simple quadrature scheme is enough and when they should aim for a double quadrature structure approach, as the latter can improve the performance at the cost of requiring more area and complexity. This study focuses on the IRR, which crucially depends on the symmetry between the I and Q branches. Non-idealities (component mismatches, parasitics, etc.) will degrade the ideal balance by affecting the mixer and/or following/previous stages. This paper analyses the effect of imbalances, providing the constraints for obtaining a 40 dB IRR in the case of a conversion from a one-hundred-megahertz signal to the five-gigahertz range (upconversion) and vice versa (downconversion) for simple and double quadrature schemes. All simulations were carried out with complete device models from 65 nm standard CMOS technology and also a post-layout Monte Carlo analysis was included for mismatch analysis. The final section includes guidelines to help designers choose the most adequate scheme for each case.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Introduction to Physically Unclonable Fuctions: Properties and Applications

  • Garcia-Bosque, M.
  • Diez-Señorans, G.
  • Sanchez-Azqueta, C.
  • Celma, S.
During the last years, Physically Unclonable Functions (PUFs) have become a very important research area in the field of hardware security due to their capability of generating volatile secret keys as well as providing a low-cost authentication. In this paper, an introduction to Physically Unclonable Functions is given, including their definition, properties and applications. Finally, as an example of how to design a PUF, the general structure of a ring oscillator PUF is presented.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A New Approach to the Design of CMOS Inductorless Common-gate Low-noise Amplifiers

  • Martinez-Perez, A.D.
  • Martinez-Martinez, P.A.
  • Royo, G.
  • Aznar, F.
  • Celma, S.
This work proposes a new approach to design a simple and effective LNA reaching very competitive results in 1.2V 65-nm standard CMOS technology. The proposed design uses a transconductance enhancement technique to achieve 2.3 dB of noise figure at the 5 GHz band. The paper exposes the advantages of a reduced number of devices in the circuit and analyses the topology. Simulations with complete technology models and statistical analysis are presented for more precise results.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Design-window methodology for inductorless noise-cancelling CMOS LNAs

  • Martinez-Perez, A. D.
  • Aznar, F.
  • Flandre, D.
  • Celma, S.
This paper presents an optimization methodology for inductorless noise-cancelling CMOS Low-Noise Amplifiers (LNA), whose performance typically depends on a tight balance in the design of two transistor stages. Due to the different functions of the two parts, noise-cancelling amplifiers become very difficult to analyze in detail by closed-form expressions or straight simulations: each section significantly affects the results of the other. In addition, opposed specifications, such as gain and cut-off frequency, suppose another grade of complexity due to the interplay of the two branches of the circuit. As a solution, the proposed methodology uses a visualization of the design window in 2-dimensional space to optimize the different parameters of the specifications without compromising the others. All specification constraints are represented in a single figure instead of one graph per parameter. Compared with most optimization methods, the design window methodology observes the design span instead of isolated design points that might not guarantee feasibility. Furthermore, as a simulation-driven exploration method, it benefits from complete device models with high-order effects that would be too complex to include in analytical expressions but critical to achieving maximum efficiency. As an example of the method, the paper describes the optimization of the well-known CS-CG noise-cancelling LNA in 65-nm standard CMOS technology. Final post-layout simulations report very competitive results with a 3.7-dB noise figure, a 17-dB gain, and a cut-off frequency above 7 GHz.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Chaotic Encryption Applied to Optical Ethernet in Industrial Control Systems

  • Pérez-Resa, A.
  • Garcia-Bosque, M.
  • Sánchez-Azqueta, C.
  • Celma, S.
In the past decades, Ethernet has become an alternative technology for the field buses traditionally used in industrial control systems and distributed measurement systems. Among different transmission media in Ethernet standards, optical fiber provides the best bandwidth, excellent immunity to electromagnetic interference, and less signal loses than other wired media. Due to the absence of a standard that provides security at the physical layer of optical Ethernet links, the main motivation of this paper is to propose and implement the necessary modifications to introduce encryption in Ethernet 1000Base-X standard. This has consisted of symmetric streaming encryption of the 8b10b symbols flow at physical coding sublayer level, thanks to a keystream generator based on chaotic algorithm. The overall system has been implemented and tested in an field programmable gate array and Ethernet traffic has been encrypted and transmitted over an optical link. The experimental results show that it is possible to cipher traffic at this level and hide the complete Ethernet traffic pattern from passive eavesdroppers. In addition, no space overhead is introduced in data frames during encryption, achieving the maximum throughput.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Digitization algorithms in ring oscillator physically unclonable functions as a main factor achieving hardware security

  • Díez Señorans G.
  • García Bosque M.
  • Sánchez Azqueta C.
  • Celma Pueyo, S.
Since the discovery of the physical random functions and their subsequent refinement into physical unclonable functions (PUF), a great effort has been made in developing and characterizing these objects attending to their physical properties as well as conceiving a myriad of different examples in the search for a better application-specificity and suitability. However, comparatively little time has been devoted to the analysis of entropy extraction algorithms beyond the recognition of some limitations due to the environment influencing the PUF behavior. In this article we focus on well known PUF candidates based on ring oscillator delay, which are ideal for FPGA prototyping due to their tolerance to asymmetries in routing. We have studied the impact that different digitization algorithms of the responses have over their security properties. Specifically, we have analyzed the response probability distributions that arise from some popular techniques of digitization called "compensated measuring" methods, highlighting their lack of uniformity and how this might translate into cryptanalytically exploitable vulnerabilities. Furthermore, we propose a new family of digitization schemes named k-modular that exhibit both uniformity in response distribution and high entropy density on both physical and response space.