Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Proyecto fin de carrera (BachelorThesis)

Development of an experimental testrig to characterize the ammonia injection process based on momentum flux, Desarrollo y puesta a punto de una instalación experimental para caracterizar el proceso de inyección de Amoniaco a partir de la cantidad de Movimiento, Desenvolupament d&apos, una instal·lació experimental per a caracteritzar el procés d&apos, injecció d&apos, amoníac a partir de la quantitat de Moviment

  • Cheddadi Rouchi, Omar
[ES] Este trabajo se enmarca en el proyecto nacional TED DIGIAMMONIA (Análisis del potencial de un motor de amoníaco y aire enriquecido con oxígeno) que tiene como objetivo analizar el proceso de atomización y mezcla del amoníaco en un motor de encendido por compresión para plantas de energía y de propulsión. La caracterización del proceso de inyección se fundamentará en la medida de cantidad de movimiento del chorro. Para ello se re-diseñará una maqueta experimental que cumpla con los requisitos para poder trabajar con este combustible (que tiene unas propiedades físicas y químicas diferentes a las de un combustible convencional). Esta herramienta experimental permitirá analizar el proceso de la inyección para diferentes presiones de suministro, presiones de cámara y diámetros de toberas., [EN] This project investigates the potential of ammonia as a sustainable fuel alternative for maritime applications, focusing on the re-design and adaptation of a momentum flux test rig to accommodate ammonia’s properties. The study aims to address global warming by developing clean energy solutions that align with the United Nations Sustainable Development Goals (SDGs), particularly SDG 7 (Affordable and Clean Energy), SDG 13 (Climate Action), and SDG 14 (Life Below Water). The research involves the analysis of ammonia’s injection characteristics compared to diesel, evaluating its feasibility as a substitute in internal combustion engines (ICEs). Modifications to the test rig, including the adaptation of gaskets, pipes, and the discharge system, were necessary to ensure compatibility with ammonia’s corrosive and toxic properties. The experimental setup proved effective, demonstrating that ammonia can exhibit stable injection characteristics similar to diesel. This study lays the groundwork for further exploration of ammonia dynamics and its potential role in decarbonizing the transport and energy sectors. The results suggest that with appropriate technology, ammonia can replace diesel without significant performance loss, highlighting the importance of continued research and development in this field. Future work will focus on enhancing the test rig’s capabilities, characterizing injector hydraulics, and developing correlation algorithms for injection rates, thereby contributing to the broader goal of reducing greenhouse gas emissions and mitigating climate change.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental characterization of direct injection liquid ammonia sprays under non-reacting Diesel-like conditions

  • Payri, Raul|||0000-0001-7428-5510
  • García-Oliver, José M|||0000-0002-2676-9681
  • Bracho Leon, Gabriela|||0000-0002-9198-7044
  • Cao, Jiawei
[EN] Ammonia is seen as a promising fuel to replace fossil fuels internal combustion engines, given the advantages of zero carbon emission and extensive experience in its synthesis at large scale. The ignition of ammonia in direct injection engine is still a challenge due to its unfavorable combustion characteristics, but the investigation of ammonia spray characteristics is an important step to shed light on the optimum combustion strategy. In this paper, the evolution of direct injection ammonia sprays was measured at engine-like conditions generated in a constant pressure facility by means of diffused back-illumination imaging and schlieren. In a first step, ammonia spray behavior is compared against that of Diesel fuel. Experimental results show a slower penetration of ammonia mainly due to a lagging starting penetration phase, which cannot be later recovered. In terms of liquid length, initial stages show the same pattern as for ammonia, while a shorter stabilized liquid length can be observed. Parametric trends over different operating conditions show a similar behavior to Diesel against ambient density and temperature, as well as with injection pressure and nozzle diameter. Such results, backed up by the application of a 1D spray model developed for Diesel -like fuels, suggest that ammonia sprays under nonreacting conditions have a mixing-controlled evolution., This research has been partially funded by MCIN/AEI/10.13039/501100011033 and the European Union"NextGenerationEU"/PRTR as part of the project DIGIAMMONIA TED2021-129379A-I00. We also acknowledge the finance support from Chinese Scholarship Council (No. 201808320236) . We would like to thank Jose Enrique del Rey and Omar Huerta for their valuable support during the experimental campaign.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Numerical investigation of direct ammonia injection and combustion

  • Di Matteo, Andrea
  • Somers, Bart
  • Bracho Leon, Gabriela|||0000-0002-9198-7044
  • Daniel
[EN] A numerical investigation of ammonia direct injection is presented in this work. Injection is initially conducted through a single-hole ECN-like nozzle into a constant volume chamber. The performance of break-up and turbulence models is assessed and the mesh is validated in non-reacting conditions against experimental data. The results, in terms of spray tip penetration and liquid length, show good agreement with experiments, although an overprediction is observed in the initial transient phase of the spray tip penetration. For the reacting case, a flamelet tabulated manifold (FGM) model is used. 1D flamelet studies and 3D Spray D-like studies, provide the initial conditions favoring the auto-ignition of ammonia. All cases analyzed, ranging in temperature from 1200 to 1300 K and in pressure from 79 to 113 bar, show ignition, in very different ranges. However, only the marine-engine derived case ("Case 3") is providing a stable lifted flame. Therefore, Case 3 is chosen to study a marine-like combustion chamber (SCC), in which ammonia is injected via a multi-hole injector. To replicate the conditions in the real application, the pilot diesel injection is treated in a simplified manner, with only the temperature and pressure rise taken into account. The conditions studied refer to two positions of the pilot injection with respect to the main ammonia injection. The results are encouraging, as both solutions show ignition. The second, considering a pilot very close to the ammonia injector, also shows a stable lifted flame for approximate to 8 ms. However, it should be noted that no experimental data are currently available for any of the reacting conditions of both the Spray D-like and marine-like cases. The study is therefore purely exploratory, mostly providing best practices and approaches, and suggesting the conditions that can be tested in real hardware in the future., This research has been partially funded by MCIN/AEI/10.13039/501100011033 and the European Union "NextGenerationEU"/PRTR as part of the project DIGIAMMONIA TED2021-129379A-I00.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Comparative life cycle assessment of oxy-fuel combustion utilization across various fuels in the maritime sector

  • Serrano, J.R.|||0000-0003-0692-3917
  • Piqueras, P.|||0000-0002-3767-0839
  • Sanchis, Enrique José|||0000-0002-6856-8992
  • Francisco Javier
[EN] This paper, aligned with the International Maritime Organization's 2050 decarbonization goals, examines the lifecycle assessment (LCA) of marine fuels - both conventional and alternative - used in oxy-fuel combustion (OFC) technology with onboard CO2 capture. It offers a novel analysis of OFC in the maritime sector, utilizing stored O2 for combustion to eliminate nitrogen oxides (NOx) and capture CO2. The study also explores producing e-fuels (e-diesel and e-methanol) from H2 and captured CO2 to establish a closed-loop carbon cycle. In addition to e-fuels, biodiesel is evaluated as an alternative fuel, with heavy fuel oil (HFO) and liquefied natural gas (LNG) serving as conventional benchmarks. Ammonia is assessed as a non-carbon-based fuel for comparison. Using GREET 2024 for LCA inventory, this research compares CO2 emissions from carbon-based fuels under both conventional combustion and OFC in current and 2050 scenarios. Results show that OFC reduces CO2 HFO emissions from 90,000 mg/MJ to 25,000 mg/MJ. Biodiesel with OFC and CO2 capture achieves net-negative emissions (-37,841 mg/MJ). Ammonia achieves emission reductions over conventional fuels if CO2 is captured in the Steam Methane Reforming (SMR) process. By 2050, with H2 produced through electrolysis, e-fuel emissions are expected to decrease by up to 6,042 mg/MJ, a decrease of 84% compared to traditional combustion. Combining biodiesel and e-fuels with OFC emerges as the optimal solution for achieving net-negative emissions and advancing maritime decarbonization by 2050., This research has been partially funded by MCIN/AEI/10.13039/5 01100011033 and the European Union "NextGenerationEU"/PRTR as part of the project DIGIAMMONIA TED2021-129379A-I00 and by Grant CIPROM/2021/061 funded by Generalitat Valenciana, Spain. Additionally, the Ph.D. student Francisco Javier Garcia has also been funded by a grant from Universitat Politecnica de Valencia, Spain with reference FPI (PAID-01-22).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis de maestría (MasterThesis)

Characterization of the Ammonia Injection-Combustion Process Piloted with Dodecane, Caracterización del proceso de inyección-combustión de amoniaco pilotado con dodecano, Caracterització del procés d&apos, injecció-combustió d&apos, amoníac iniciat amb dodecà

  • Daniel
[ES] Avanzar hacia un mercado energético más sostenible es primordial para hacer frente al acelerado cambio climático causado por las emisiones de CO2 procedentes de la combustión de combustibles fósiles. La diversificación y la innovación en tecnologías energéticas limpias son estrategias clave para lograr sistemas de producción de energía basados en energías renovables. Una de las vías para reducir este impacto es la sustitución de los combustibles fósiles utilizados en los motores de combustión interna (ICE, por sus siglas en inglés) por combustibles alternativos bajos o nulos en carbono. En concreto, el amoniaco (NH3) es un combustible libre de carbono y un portador energético del hidrógeno adecuado para la generación de energía en el transporte marítimo, gracias a su compatibilidad con los ICE de dos tiempos de baja velocidad modificados y a la infraestructura existente que facilita su almacenamiento y transporte. Aunque el interés en el NH3 está aumentando debido a sus propiedades competitivas en comparación con los combustibles alternativos, su combustión presenta algunas desventajas por su menor reactividad y a las emisiones de NOx potencialmente más altas que las de los combustibles fósiles convencionales. Algunos estudios se han enfocado en los procesos de mezcla e ignición del NH3, pero en condiciones de motor convencionales se dificulta conseguir la autoignición de amoniaco. Otros estudios descubrieron que el uso de una inyección piloto de un combustible de mayor reactividad contribuye a la combustión de NH3. En este sentido, este trabajo propone una metodología experimental para evaluar la combustión de un chorro de NH3 usando un inyector de tipo spray-D de la Engine Combustion Network (ECN) (con un diámetro de tobera >300µm) asistido con una inyección piloto de dodecano (C12H26) desde un inyector spray-C en condiciones similares a las de un motor, en una instalación de presión constante mediante técnicas ópticas. La configuración óptica comprende: una cámara de alta velocidad para captar la fase de vapor del chorro mediante la técnica de Schlieren y una cámara de alta velocidad acoplada a un intensificador de alta velocidad para registrar la radiación emitida por el OH de la combustión. En la instalación, las toberas de los inyectores apuntan al centro de la cámara y están orientadas 90º entre sí. Se ensayaron diferentes tiempos de desfase entre la energización de los inyectores de NH3 y C12H26 para evaluar el efecto sobre el inicio de la ignición y la propagación de la llama. El análisis de la luminosidad de la llama y de la activación del OH muestra cómo el tiempo de desfase influye en la intensidad de la combustión y en la morfología de la llama. La luminosidad total de la combustión aumenta cuando se retrasa la inyección de dodecano, lo que demuestra que la evaporación y la difusión del amoniaco en la cámara, previa a la combustión del dodecano, contribuyen a la ignición del amoniaco. En cuanto a la morfología de la llama, cuando la inyección piloto se retrasa respecto a la inyección de amoniaco, la anchura de la llama es mayor y el ángulo de la llama es más amplio. Un análisis preliminar de estos resultados sugiere que la inyección piloto de dodecano contribuye a la ignición del amoníaco y que el efecto es más significativo cuando el amoníaco ya se ha difundido en el ambiente de la cámara. Esta investigación establece una base inicial para comprender cómo la inyección piloto puede favorecer el encendido del amoníaco a través de la sincronización de los instantes de inicio de inyección., [EN] Moving towards a more sustainable energy market is paramount to face the accelerated climate change caused by CO2 emissions from fossil fuels combustion. Diversification and innovation in clean energy technologies are key strategies to achieve renewable-based power production systems. One direction to reduce this impact is the replacement of fossil fuels used in internal combustion engines (ICEs) with low- or zero-carbon alternative fuels. Specifically, ammonia is a carbon-free fuel and hydrogen energy carrier suitable for power generation in marine transport, because of its compatibility in modified low-speed two-stroke ICEs and already established infrastructure making it easy to storage and transport. Although NH3 is reaping interest due to its competitive properties compared to alternative fuels, its combustion presents some disadvantages due to the ammonia lower reactivity and potential higher NOx emissions than conventional fossil fuels. Some studies focus on gaining insights into the mixing and ignition processes of NH3, but they strive to reach its self-ignition under conventional engine conditions. Other studies found that using a pilot injection of a higher-reactivity fuel assists the main NH3 injection to ignite. Thus, this work proposes an experimental methodology to evaluate the combustion of an NH3 spray injected from an Engine Combustion Network (ECN) spray-D injector (with larger nozzle diameter of 300µm) assisted with a dodecane (C12H26) pilot injection from an ECN spray-C injector under engine-like conditions, in a constant pressure facility through optical techniques. The total mass injected from ammonia and dodecane injections are obtained from a self-developed technique to measure the rate of injection profiles, thus, the energy share of each fuel during the combustion process are calculated. The optical setup comprised: a high-speed camera to capture the spray vapor phase using the Schlieren technique and a high-speed camera coupled to a high-speed intensifier to record the radiation emitted by OH from the combustion. In the facility, the injector nozzles are pointing to the center of the chamber and oriented 90º from each other. Different dwell times between the NH3 and the C12H26 injections were tested to evaluate the effect on the start of ignition and the flame propagation. The analysis of the flame luminosity and the OH activation show how the dwell time influences the combustion intensity and the spray morphology. The combustion total luminosity increases with the delay of the dodecane injection showing that evaporation and diffusion of ammonia in the chamber, before dodecane combustion, contributes to the ignition of ammonia. Regarding the flame morphology, when the pilot injection is delayed to the ammonia injection, the flame width is larger, and the flame angle is wider. A preliminary analysis of these results suggests that the dodecane pilot injection contributes to the ammonia ignition and the effect is more significant when the ammonia has already diffused in the chamber medium. This work provides an initial direction of how a pilot injection would contribute to the ignition of ammonia through the synchronization of both start of injection times.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Extension of a Zero-Dimensional Mixing-Controlled Combustion Model for the Development of a NOx Free System Based on the Oxy-Combustion Concept

  • Serrano, J.R.|||0000-0003-0692-3917
  • López, J. Javier|||0000-0002-9486-2511
  • Martín, Jaime|||0000-0002-0496-3176
  • Bracho Leon, Gabriela|||0000-0002-9198-7044
[EN] Oxy-combustion is a promising concept to achieve an extremely clean combustion, independently of the fuel type, because, on the one hand, it is a NOx-free combustion and, on the other hand, the CO2 produced during combustion can be easily captured once the water vapour is removed from the exhaust gases stream, consequently allowing also carbon neutral operation. An existing zero-dimensional (0D), mixing-controlled combustion model, developed for a standard diesel combustion scenario, has been adapted to the oxy-fuel combustion scenario. Initially, the model over-predicted the heat release at the end of the combustion process. The main model adaptation was to modify the relationship between the average YO2 and the effective YO2 (i.e. the one of the charge actually entrained by the spray), to be consistent with the significant increase in compression ratio needed in the oxy-fuel context. As a result, a model able to correctly predict the combustion behaviour at any operating condition has been obtained, which finally represents a very suitable tool to assist in the concept development., This research has been partly supported by Grant CIPROM/2021/061 funded by Generalitat Valenciana, by Grant PID2021-123351OB-I00 funded by MCIN/AEI/10.13039/501100011033 and, as appropriate, by 'ERDF A Way of Making Europe'. Finally it has also been partially supported by grant TED2021-129379A-I00 funded by the European Union Next generation EU/PRTR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Momentum flux-based model to estimate injection rate of an ammonia injector

  • Bracho Leon, Gabriela|||0000-0002-9198-7044
  • De La Morena, Joaquín|||0000-0003-0208-508X
  • Daniel
  • Martino, Manuel
  • Postrioti, Lucio
[EN] Ammonia emerges as a feasible candidate to replace fossil fuels to avoid in-field CO2 emissions while operating low-speed internal combustion engines. An in-depth analysis of the injection process is necessary to enable the use of this fuel. The injection rate is a fundamental characteristic of the injection process, which describes the timing and instantaneous quantity of fuel mass introduced into the combustion chamber. However, the direct experimental evaluation of the injection rate is generally not possible due to the incompatibility of ammonia with existing measurement hardware. This study proposes a methodology to estimate the ammonia injection rate curve of high-pressure injectors for compression ignition engines based on momentum flux data, obtained using equipment suitable for ammonia properties. In this regard, two single-hole injectors were investigated using ammonia and, as a reference fuel, diesel. A comparison between the injection rate and momentum flux operating on diesel allows the derivation of a transfer function for extrapolating the injection rate curve from the momentum flux signal. After validating the model, it was applied to the case of ammonia injections for which only momentum flux data were available. The proposed methodology offers a viable alternative to obtain the injection rate measurement, particularly in challenging scenarios where only momentum flux data is available and direct measurement of the injection rate is not feasible., This research has been partially funded by MCIN/AEI/10.13039/501100011033 and the European Union "NextGenerationEU"/PRTR as part of the project DIGIAMMONIA TED2021-129379A-I00. The author D. Pinilla thanks the Universitat Politecnica de Valencia for his pre-doctoral contract (FPI-2022-S2-64225) , which is included within the framework of Programa de Apoyo para la Investigacion y Desarrollo (PAID-01-22) . Also, the authors would like to thank Jose Enrique del Rey and Omar Huerta for their valuable support during the experimental campaign.