Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Computational study on the effect of thermodynamic operating conditions on primary atomization in pressure-swirl atomizers

  • Salvador, Francisco Javier|||0000-0003-3269-2251
  • Carreres, Marcos|||0000-0001-6430-6613
  • Lozano-Antón, Alejandro|||0009-0007-7713-6343
  • Demoulin, F.X.
[EN] Reducing pollutants and carbon emissions is a main and commonplace concern nowadays. Improving liquid breakup efficiency in injection processes for combustion applications may lead to important benefits in that regard. In this work, the effect of varying the injection conditions in terms of their thermodynamic state is studied when injecting liquid fuel into quiescent air through a simplex pressure-swirl atomizer. For that purpose, high-fidelity DNS-like simulations are carried out. Results, validated by comparing the spray macroscopic shape with experimental pictures, show a realistic breakup mechanism already observed in previous studies. An improvement in breakup capabilities is observed when preheating both fuel and air. In this case, the injected liquid sheet is thinner and presents more instabilities, leading to an earlier breakup in the axial direction. Besides, the generated droplet population is larger and finer than that of the ambient temperature injection, indicating a better atomization efficiency. A size-growing trend is observed in the droplet population for both cases when getting far away from the nozzle, but is more noticeable in the low-temperature condition. This investigation helps to understand the first stage of the liquid breakup in pressure-swirl atomizers. Its results, complemented with those from simulating different operating conditions or fuels for the same atomizer, can be used to elaborate prediction models able to faithfully represent the primary atomization outcomes when using lower resolution methods more accessible from the computational standpoint. Besides, the importance of internal injector flow characteristics is also demonstrated, particularly when considering liquid film thickness, both mean and fluctuation. These findings indicate that a possible model based on internal injector flow studies may also be feasible for determining atomization efficiency., This research has been funded by the Spanish Ministerio de Ciencia e Innovaci¿ on through the project TED2021-129719B-C22: Micromixes utilization for stable continuous hydrogen combustion for zero-carbon aviation MIXSHY, belonging to the program Programa de proyectos estrat¿ egicos de transici¿ on ecol¿ ogica y digital . The authors thankfully acknowledge the computer resources at MareNostrum and the technical support provided by Barcelona Supercomputing Center (RES-IM-20232-0022). Lozano A. is supported through the contract FPU of the Ministerio de Educaci¿ on y Formaci¿ on Profesional .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Spray Characterization of Direct Hydrogen Injection as a Green Fuel with Lower Emissions

  • Payri, Raul|||0000-0001-7428-5510
  • Novella Rosa, Ricardo|||0000-0002-5123-6924
  • Bori-Fabra, Óscar|||0000-0002-7850-3973
  • Nasser, Khodor I.
[EN] A viable green energy source for heavy industries and transportation is hydrogen. The internal combustion engine (ICE), when powered by hydrogen, offers an economical and adaptable way to quickly decarbonize the transportation industry. In general, two techniques are used to inject hydrogen into the ICE combustion chamber: port injection and direct injection. The present work examined direct injection technology, highlighting the need to understand and manage hydrogen mixing within an ICE's combustion chamber. Before combusting hydrogen, it is critical to study its propagation and mixture behavior just immediately before burning. For this purpose, the DI-CHG.2 direct injector model by BorgWarner was used. This injector operated at 35 barG and 20 barG as maximum and minimum upstream pressures, respectively; a 5.8 g/s flow rate; and a maximum tip nozzle temperature of 250 degrees C. Experiments were performed using a high-pressure and high-temperature visualization vessel available at our facility. The combustion mixture prior to burning (spray) was visually controlled by the single-pass high-speed Schlieren technique. Images were used to study the spray penetration (S) and spray volume (V). Several parameters were considered to perform the experiments, such as the injection pressure (Pinj), chamber temperature (Tch), and the injection energizing time (Tinj). With pressure ratio and injection time being the parameters commonly used in jet characterization, the addition of temperature formed a more comprehensive group of parameters that should generally aid in the characterization of this type of gas jets as well as the understanding of the combined effect of the rate of injection on the overall outcome. It was observed that the increase in injection pressure (Pinj) increased the spray penetration depth and its calculated volume, as well as the amount of mass injected inside the chamber according to the ROI results; furthermore, it was also observed that with a pressure difference of 20 bar (the minimum required for the proper functioning of the injector used), cyclic variability increased. The variation in temperature inside the chamber had less of an impact on the spray shape and its penetration; instead, it determined the velocity at which the spray reached its maximum length. In addition, the injection energizing time had no effect on the spray penetration., This work was supported by the Spanish Ministerio de Ciencia e Innovación through grant number TED2021-129719B-C22: Utilizacion de Micromixers para Combustion Estable de Hidrogeno en Aviacion de Cero Emisiones. Estudio Experimental funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Gasoline direct injection spray-wall impingement: Macroscopic characterization and optical analysis

  • Gimeno, Jaime|||0000-0003-3317-9994
  • Marti-Aldaravi, Pedro|||0000-0003-4650-4004
  • Carreres, Marcos|||0000-0001-6430-6613
  • Carvallo-García, César Leonardo|||0000-0003-2297-2225
[EN] Spray-wall interaction (SWI) plays a crucial role in spray-based processes, influencing atomization, mixing, combustion efficiency, and pollutant formation. This study investigates SWI by analyzing spray morphology and key geometrical parameters, including spray penetration, spray area, spreading behavior on a quartz wall, and post-impingement spray thickness. Three optical visualization techniques were employed to study the effects of varying injection and ambient pressures, fuel and ambient temperatures, and injector tip-to-wall distance. The impact of cold-start and other evaporative engine conditions on spray morphology was analyzed. An increase in the injection pressure, an increase in wall-to-tip distance, and a decrease in ambient back-pressure delay the start of the spray-wall interaction. Higher injection pressure leads to greater spray spreading over the wall. Regarding extinction profiles, a higher injection pressure and ambient temperature result in lower liquid concentration in the spray., This research was funded by the Spanish Ministerio de Ciencias e Innovacion through project reference TED2021-129719B-C22. The author C. Carvallo thanks the Universitat Politècnica de València for his postdoctoral contract (PAID-10-22) which is included within the framework of Programa de Apoyo para la Investigación 𝑦 Desarrollo. Also thanks the Conselleria de Innovacion, Universidades, Ciencia 𝑦 Sociedad Digital (Program PROMETEO) - Referencia CIPROM/2022/24 . Finally, the collaboration of Jose Enrique del Rey Garcia, Omar Huerta Cornejo and Sergi Soro in the laboratory work and the setup of the hardware is greatly thanked.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Droplet characterization of a pressure-swirl atomizer by means of high-fidelity modelling based on DNS simulations

  • Salvador, Francisco Javier|||0000-0003-3269-2251
  • Marti-Aldaravi, Pedro|||0000-0003-4650-4004
  • Lozano-Antón, Alejandro|||0009-0007-7713-6343
  • Taghavifar, H.
  • Nemati, A.
[EN] Liquid injection optimization is key to enhance the efficiency of many processes in a wide variety of fields. Combustion processes are one of the most challenging ones, due to the direct emissions and greenhouse gases implications. This work aims at studying the external two-phase flow produced when injecting fuel with a pressure-swirl atomizer in an operating condition typical of an academic burner. The main objective is to have a better comprehension of the atomization process in this type of nozzles, getting information on the droplets¿ characteristic size and how they are produced and arranged. For that regard, a high-fidelity Direct Numerical Simulation (DNS) is used to analyse the very near field of the spray produced, where primary atomization takes place. Pre-processing tasks are explained in terms of geometry comprehension, computational domain and mesh selection, boundary conditions and main simulation setup parameters. Then, through post-processing tasks, both quantitative and qualitative results are extracted, which will serve to validate the modelling against previous works and to provide novel data about the atomization process in pressure-swirl atomizers. Results show that smaller droplets predominate over bigger ones as expected, since just the first millimetres of the spray are modelled. However, there is a clear trend of droplet¿s size growing when increasing both axial and radial distances, indicating coalescence in regions relatively far from the nozzle. The achieved results, together with results from simulating the injection event with other fuels or at other operating conditions, can be used to develop a phenomenological model able to predict how atomization is going to be as a function of the non-dimensional Reynolds and Weber numbers that could be implemented in lower-resolution RANS and LES codes for modelling atomization. This investigation proves that it is possible to faithfully predict the near field of these sprays through DNS simulation, getting similar trends to those of the experimental data, and that the study through numerical models is necessary in the investigation process. The information they can bring, together with the experimental knowledge, can make a good synergy that will eventually lead to a better understanding of this type of atomizers., This research has been funded by the Spanish "Ministerio de Ciencia e Innovacion" through the project TED2021-129719B-C22: "Micromixes utilization for stable continuous hydrogen combustion for zero-carbon aviation" MIXSHY, belonging to the program "Programa de proyectos estrategicos de transicion ecologica y digital". The authors thankfully acknowledge the computer resources at MareNostrum and the technical support provided by Barcelona Supercomputing Center (RES-IM-2022-2-0018). Lozano A. is supported through the contract FPU21/02749 of the "Ministerio de Educacion y Formacion Profesional".