Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 20
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Electric field bridging-effect in electrified microfibrils&apos, scaffolds

  • Fontana, Sara
  • Caramazza, Laura
  • Marracino, Paolo
  • Cuenca-Ortolá, Irene
  • Colella, Micol
  • Dolciotti, Noemi
  • Paffi, Alessandra
  • Consales, Claudia
  • Balucani, Marco
  • Apollonio, Francesca
  • Liberti, Micaela
  • Gisbert-Roca, Fernando|||0000-0003-3937-5822
  • Ivashchenko, Sergiy|||0000-0003-1633-4665
  • Más Estellés, Jorge|||0000-0001-8446-6737
[EN] Introduction: The use of biocompatible scaffolds combined with the implantation of neural stem cells, is increasingly being investigated to promote the regeneration of damaged neural tissue, for instance, after a Spinal Cord Injury (SCI). In particular, aligned Polylactic Acid (PLA) microfibrils¿ scaffolds are capable of supporting cells, promoting their survival and guiding their differentiation in neural lineage to repair the lesion. Despite its biocompatible nature, PLA is an electrically insulating material and thus it could be detrimental for increasingly common scaffolds¿ electric functionalization, aimed at accelerating the cellular processes. In this context, the European RISEUP project aims to combine high intense microseconds pulses and DC stimulation with neurogenesis, supported by a PLA microfibrils¿ scaffold. Methods: In this paper a numerical study on the effect of microfibrils¿ scaffolds on the E-field distribution, in planar interdigitated electrodes, is presented. Realistic microfibrils¿ 3D CAD models have been built to carry out a numerical dosimetry study, through Comsol Multiphysics software. Results: Under a voltage of 10 V, microfibrils redistribute the E-field values focalizing the field streamlines in the spaces between the fibers, allowing the field to pass and reach maximum values up to 100 kV/m and values comparable with the bare electrodes¿ device (without fibers). Discussion: Globally the median E-field inside the scaffolded electrodes is the 90% of the nominal field, allowing an adequate cells¿ exposure., The author(s) declare financial support was received for the research, authorship, and/or publication of this article. This work has been developed in the framework of and supported by the FET-OPEN RISEUP project funded by the European Union s Horizon 2020 research and innovation program (grant agreement no. 964562). ICO acknowledges the grant PRE2019-090716 cofunded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future for supporting her visiting student stay at Sapienza, University of Rome. FGR acknowledges Vicerrectorado de Investigación de la Universitat Politècnica de València (PAID-10-22) for co-funding with RISEUP project his fellowship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Complex-valued trainable activation function hardware using a TCO/silicon modulator

  • Navarro-Arenas, Juan
  • Parra Gomez, Jorge|||0000-0003-4610-3411
  • Sanchis Kilders, Pablo|||0000-0003-2984-4218
[EN] Artificial neural network-based electro-optic chipsets constitute a very promising platform because of its remarkable energy efficiency, dense wavelength parallelization possibilities and ultrafast modulation speeds, which can accelerate computation by many orders of magnitude. Furthermore, since the optical field carries information in both amplitude and phase, photonic hardware can be leveraged to naturally implement complex-valued neural networks (CVNNs). Operating with complex numbers may double the internal degrees of freedom as compared with real-valued neural networks, resulting in twice the size of the hardware network and, thus, increased performance in the convergence and stability properties. To this end, the present work revolves on the concept of CVNNs by offering a design, and simulation demonstration, for an electro-optical dual phase and amplitude modulator implemented by integrating a transparent conducting oxide (TCO) in a silicon waveguide structure. The design is powered by the enhancement of the optical-field confinement effect occurring at the epsilon-near-zero (ENZ) condition, which can be tuned electro-optically in TCOs. Operating near the ENZ resonance enables large changes on the real and imaginary parts of the TCO¿s permittivity. In this way, phase and amplitude (dual) modulation can be achieved in single device. Optimal design rules are discussed in-depth by exploring device¿s geometry and voltage-dependent effects of carrier accumulation inside the TCO film. The device is proposed as a complex-valued activation function for photonic neural systems and its performance tested by simulating the training of a photonic hardware neural network loaded with our custom activation function., Agencia Estatal de Investigacion (PID2022-137787OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe"; Generalitat Valenciana (PROMETEO Program (CIPROM/2022/14) ) ; Advanced Materials programme supported by MCIN with funding from European Union NextGenerationEU and by Generalitat Valenciana (PRTR-C17.I1) ; University of Valencia/Ministry of Universities (Government of Spain) , modality "Margarita Salas", funded by the European Union, Next-Generation EU (MS21-037) ; Universitat Politecncia de Valencia (2-PAID-10-22).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Review of autism spectrum disorder databases for the identification of candidate genes

  • Martínez-Minguet, Diana
  • García-Simón, Alberto|||0000-0001-5910-4363
  • Costa-Sánchez, Mireia|||0000-0002-8614-0914
  • Pastor López, Oscar|||0000-0002-1320-8471
  • Noel-Lopez, Rene
[EN] Research into the genetics of autism spectrum disorder (ASD) seeks to unravel its complex genetic background by identifying genes associated with the condition at varying levels of confidence. While these findings hold significant potential for clinical applications, the dispersed nature of scientific evidence presents a challenge for the reliable identification of ASD candidate genes. Although ASD candidate genes are gathered in genetic databases, these vary widely in the gene sets, biological information, and confidence level classification methods, leading to inconsistencies and complicating research efforts. This study aims to identify and assess the quality and reliability of ASD genetic databases to support more robust identification of ASD candidate genes. Using a Systematic Mapping Study, we identified 13 specialized databases. We then followed a Data Quality Approach in two stages, first assessing Accessibility, Currency, and Relevance dimensions to select the potentially relevant databases to be used as ASD candidate gene sources. The selected databases were analysed, assessing Completeness¿at schema and data level¿, and Consistency between high-confidence ASD genes. The four selected databases are: AutDB, SFARI Gene, GeisingerDBD, and SysNDD. SFARI Gene demonstrated the highest completeness at schema level (89%), while AutDB showed the highest completeness at data level (90%). However, only 1.5% consistency was observed across the four databases in their classification of high-confidence ASD candidate genes. Our findings highlight the unique contributions of each database and reveal substantial inconsistencies in gene classification, driven by differences in scoring criteria and the scientific evidence considered. These inconsistencies have important implications for both clinical users and researchers, as conclusions may vary depending on the database used. This study supports researchers when using ASD genetic databases, promoting consistent interpretation and improved clinical decisions., This work was supported by the Generalitat Valenciana through the CoMoDiD project (CIPROM/2021/023) and the predoctoral grant (ACIF/2021/117), and by grant ANID/FONDECYT/INICIACION/11251489.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Synergic Application of High-Oxygenated E-Fuels and New Bowl Designs for Low Soot Emissions: An Optical Analysis

  • Pastor, José V.|||0000-0003-4113-4681
  • Micó, Carlos|||0000-0001-5787-6212
  • Tejada-Magraner, Francisco José|||0000-0001-6851-5084
  • De Vargas Lewiski, Felipe
  • Tornatore, Cinzia
[EN] Synthetic fuels significantly reduce pollutant emissions and the carbon footprint of ICE applications. Among these fuels, oxymethylene dimethyl ethers (OMEX) are an excellent candidate to entirely or partially replace conventional fuels in compression ignition (CI) engines due to their attractive properties. The very low soot particle formation tendency allows the decoupling of the soot-NOX trade-off in CI engines. In addition, innovative piston geometries have the potential to reduce soot formation inside the cylinder in the late combustion stage. This work aims to analyze the potential of combining OMEX with an innovative piston geometry to reduce soot formation inside the cylinder. In this way, several blends of OMEX-Diesel were tested using a radial-lips bowl geometry and a conventional reentrant bowl. Tests were conducted in an optically accessible engine under simulated EGR conditions, reducing the in-cylinder oxygen content. For this purpose, 2-colour pyrometry and high-speed excited state hydroxyl chemiluminescence techniques were applied to trace the in-cylinder soot formation and oxidation processes. The results confirm that increasing OMEX in Diesel improves the in-cylinder soot reduction under low oxygen conditions for both piston geometries. Moreover, using radial lips bowl geometry significantly improves the soot reduction, from 17% using neat Diesel to 70% less at the highest OMEX quantity studied in this paper., This work has been partially funded by Universitat Politècnica de València through the program of access contracts for PhD research staff in Research Structures of the Universitat Politècnica de València with reference PAID-10-22. The presence of Cinzia Tornatore at Universitat Politècnica de València was funded by the Short Term Mobility (STM) Program of the Italian National Research Council.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Analysis of fire behavior in semi-real forest scenarios by integrating tls data into physical simulation models

  • Simo-Marti, Marina|||0000-0001-9605-9645
  • Crespo-Peremarch, Pablo|||0000-0003-2241-4493
  • Torralba, Jesús|||0000-0001-8644-8604
  • Ruiz Fernández, Luis Ángel|||0000-0003-0073-7259
[EN] In view of the increasing intensity and frequency of large forest fires, the study and simulation of fire behavior in Mediterranean forests appears as a crucial task to define prevention and extinction strategies. The physical model Fire Dynamics Simulator (FDS) allows the analysis of fire behavior in 3D scenarios at high levels of resolution by introducing LiDAR point clouds to describe the structure and characteristics of the vegetation. The main objective of this paper is the analysis of fire behavior in Mediterranean forest semi-real scenarios, by modifying structural properties of the forest related to the horizontal and vertical continuity of the vegetation. To achieve this goal, a methodology has been developed to generate scenarios from real segmented and voxelized individuals of Mediterranean shrubland and tree species. These models were obtained from TLS (Terrestrial Laser Scanning) in plots located in La Serra d'Espadà. The methodology considers the distribution of biomass at individual and voxel level, taking into account a heterogeneous distribution of the bulk density of forest fuel, estimated based on the proportion of returns from the point cloud. Finally, for the analysis of the results, the evolution graphs of the following model output variables have been studied: the rate of spread, the heat release rate, the mass loss rate and the percentage of biomass consumed. Preliminary findings indicate that horizontal continuity of vegetation is the main driver for the development of steady and sustained fires. , This work was supported by (i) PID2020-117808RBC21/AEI/10.13039/50110001103 and FSE+ “Invierte en tu Futuro” under Grant PRE2021-099526; and (ii) “Programa de Contratos de Acceso de Personal Investigador Doctor” (PAID-10-22) from “Vicerrectorado de Investigación de la Universitat Politècnica de València”.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Deep learning-based keypoint detection for 3D biometric measurement of tuna using underwater stereo vision

  • Martínez-Peiró, Joaquín|||0000-0002-4430-9355
  • Muñoz-Benavent, Pau|||0000-0003-4681-183X
  • Andreu García, Gabriela|||0000-0001-5448-6171
  • Puig Pons, Vicente|||0000-0002-8154-8259
  • Espinosa, Víctor
[EN] Accurate and scalable estimation of tuna size during transfer and farming operations is essential for stock assessment and management. This study presents a fully automatic processing pipeline that combines deep learning-based keypoint detection with stereoscopic vision geometry to estimate fish length, height, and width from underwater stereoscopic imagery. The system exploits videos acquired while freely swimming fish under real underwater conditions from two different viewpoints: a lateral view, from which length and height are measured, and a ventral view, which provides length and width. Having measurements of individual fish in all three dimensions can significantly improve the accuracy of estimating biomass and schools for large-bodied species. For each view, a Keypoint R-CNN model was trained on heterogeneous datasets of 850 stereo pairs annotated independently by three human operators. To account for annotation variability, per-keypoint normalization constants were computed and used to adapt COCO-style Object Keypoint Similarity (OKS) metrics to this domain. The proposed Keypoint R-CNN system achieved 2D keypoint localization accuracy comparable to human annotators (mean OKS = 0.91). The resulting 3D biometric measurements yielded relative errors of approximately 1%-2% for length-related dimensions and 2%-5% for height and width, within the range observed for inter-annotator variability. Measurement bias remained below 0.2% for all evaluated dimensions, and no systematic over-or under-estimation trends were observed. Automatic and manual size distributions were statistically indistinguishable, while processing throughput was compatible with offline operational analysis requirements. Overall, the proposed approach provides a reliable and scalable foundation for automated 3D size monitoring in tuna aquaculture., This study forms part of the ThinkInAzul programme and was supported by the MCIN with Funding from the European Union's NextGenerationEU (PRTR-C17.I1) and the Generalitat Valenciana (THINKINAZUL/2021/007 and THINKINAZUL/2021/009). This work was supported by funding from UPV (PAID-01-23 and PAID-10-22) and ACTTHUN project grant ref. PID2021-127426OB-C21 funded by MICIU/AEI/10.13039/501100011033.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

GDI spray wall impingement against a heated and instrumented wall.

  • Payri, Raul|||0000-0001-7428-5510
  • Salvador, Francisco Javier|||0000-0003-3269-2251
  • Gimeno, Jaime|||0000-0003-3317-9994
  • Carvallo-García, César Leonardo|||0000-0003-2297-2225
[EN] Spray-wall interaction (SWI) is critical in the atomization, mixing, and combustion behavior of fuels and the formation of pollutant emissions. These elusive effects impact internal combustion engine performance and other engineering applications such as spray-induced cooling, painting, and solid deposit control. As a result, spray wall interactions are an active area of research. This article aims to use a thermoregulated steel wall to study the spray-wall interaction phenomenon. A multi-hole injector manufactured by Continental was used. Isooctane was employed as the injected fuel, and the wall was positioned at one distance from the injector tip and one inclination angle, changing the wall surface temperature, the injection pressure, the ambient back pressure, the ambient temperature, and the fuel temperature. The spray-wall heat transfer is analyzed, and the heat flux is measured by employing high-speed thermocouples fitted in the wall and using a one-dimensional transient wall heat model. The ambient and wall temperatures highly affect the amount of liquid in the spray. By increasing both temperatures, a lesser amount of liquid was found. For the range evaluated in the experimental campaign, the results revealed a significant increase in surface heat flow and wall temperature variance with both wall and fuel temperatures and the ambient temperature, but to a lesser extent., This research was funded by the Spanish Ministerio de Ciencias e Innovacion through project reference PID2021-125812OB-C21. The author C. Carvallo thanks the Universitat Politècnica de València for his postdoctoral contract (PAID-10-22) which is included within the framework of Programa de Apoyo para la Investigación 𝑦 Desarrollo. Also thanks the Conselleria de Innovacion, Universidades, Ciencia 𝑦 Sociedad Digital (Program PROMETEO) - Referencia CIPROM/2022/24 .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Ultra-high endurance silicon photonic memory using vanadium dioxide

  • Seoane-Martínez, Juan José
  • Navarro-Arenas, Juan
  • Recaman, Maria
  • Koen Schouteden
  • Locquet, Jean-Pierre
  • Parra Gomez, Jorge|||0000-0003-4610-3411
  • Sanchis Kilders, Pablo|||0000-0003-2984-4218
[EN] Silicon photonics arises as a viable solution to address the stringent resource demands of emergent technologies, such as neural networks. Within this framework, photonic memories are fundamental building blocks of photonic integrated circuits that have not yet found a standardized solution due to several trade-offs among different metrics such as energy consumption, speed, footprint, or fabrication complexity, to name a few. In particular, a photonic memory exhibiting ultra-high endurance performance (>106¿cycles) has been elusive to date. Here, we report an ultra-high endurance silicon photonic volatile memory using vanadium dioxide (VO2) exhibiting a record cyclability of up to 107¿cycles without degradation. Moreover, our memory features an ultra-compact footprint below 5¿µm with the potential for nanosecond and picojoule programming performance. Our silicon photonic memory could find application in emerging photonic applications demanding a high number of memory updates, such as photonic neural networks with in situ training., This work was supported by funding from the European Union s Horizon Europe by the granting Authority HADEA (European Health and Digital Executive Agency) under Grant Agreement No 101070690 (PHOENIX). Grant PID2022-137787OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe", and PROMETEO Program (CIPROM/2022/14) funded by Generalitat Valenciana are also acknowledged. J.N.A acknowledges grant from University of Valencia/Ministry of Universities (Government of Spain), modality Margarita Salas (MS21-037), funded by the European Union, Next-Generation EU. J. Parra would like to acknowledge Universitat Politècnica de València for his grant 2-PAID-10-22.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Gasoline direct injection spray-wall impingement: Macroscopic characterization and optical analysis

  • Gimeno, Jaime|||0000-0003-3317-9994
  • Marti-Aldaravi, Pedro|||0000-0003-4650-4004
  • Carreres, Marcos|||0000-0001-6430-6613
  • Carvallo-García, César Leonardo|||0000-0003-2297-2225
[EN] Spray-wall interaction (SWI) plays a crucial role in spray-based processes, influencing atomization, mixing, combustion efficiency, and pollutant formation. This study investigates SWI by analyzing spray morphology and key geometrical parameters, including spray penetration, spray area, spreading behavior on a quartz wall, and post-impingement spray thickness. Three optical visualization techniques were employed to study the effects of varying injection and ambient pressures, fuel and ambient temperatures, and injector tip-to-wall distance. The impact of cold-start and other evaporative engine conditions on spray morphology was analyzed. An increase in the injection pressure, an increase in wall-to-tip distance, and a decrease in ambient back-pressure delay the start of the spray-wall interaction. Higher injection pressure leads to greater spray spreading over the wall. Regarding extinction profiles, a higher injection pressure and ambient temperature result in lower liquid concentration in the spray., This research was funded by the Spanish Ministerio de Ciencias e Innovacion through project reference TED2021-129719B-C22. The author C. Carvallo thanks the Universitat Politècnica de València for his postdoctoral contract (PAID-10-22) which is included within the framework of Programa de Apoyo para la Investigación 𝑦 Desarrollo. Also thanks the Conselleria de Innovacion, Universidades, Ciencia 𝑦 Sociedad Digital (Program PROMETEO) - Referencia CIPROM/2022/24 . Finally, the collaboration of Jose Enrique del Rey Garcia, Omar Huerta Cornejo and Sergi Soro in the laboratory work and the setup of the hardware is greatly thanked.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enhanced BaTiO3/Si3N4 integrated photonic platform with VO2 technology for large-scale neuromorphic computing [Invited]

  • Seoane-Martínez, Juan José
  • Navarro-Arenas, Juan
  • Parra Gomez, Jorge|||0000-0003-4610-3411
  • Sanchis Kilders, Pablo|||0000-0003-2984-4218
[EN] The hybrid barium titanate (BaTiO3 or BTO) - silicon nitride (Si3N4 or SiN) platform integrated on silicon has been established as a promising candidate for implementing photonic integrated circuits with unique features in terms of high modulation speeds and low transmission loss. However, despite the high Pockels effect in BTO, switching device footprints are relatively large, which could compromise their use in applications with large scalability requirements, such as neuromorphic computing hardware. To address this limitation, we propose the integration of vanadium dioxide (VO2) in the SiN/BTO platform to enable ultra-compact amplitude switching devices offering a scalar multiplication functionality with multilevel operation. More concretely, an electronically reprogrammable switching device with a 5-bit amplitude encoding capability and an insertion loss of only 0.5 dB is developed. The proposed device is built with a 9-µm-long VO2/SiN/BTO waveguide structure integrated with an efficient microheater using a transparent conducting oxide. Such a vital building block would offer significant potential for developing more complex photonic integrated circuits, including dot-product or matrix-vector multiplication engines. The combination of high speed, low loss, and reduced footprint makes the proposed enhanced platform an attractive solution for application in scalable and energy-efficient neuromorphic computing hardware., European Health and Digital Executive Agency (101070690 (PHOENIX)); Agencia Estatal de Investigación (PID2022-137787OB-I00); Generalitat Valenciana (PROMETEO Program (CIPROM/2022/14)); Ministerio de Universidades ( Margarita Salas (MS21-037)); Universitat Politècnica de València (Grant 2-PAID-10-22).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Numerical Simulation and Experimental Validation of the Acoustical Target Strength of Bluefin Tuna Swimbladders Derived from 3D Computed Tomographic Images

  • Ladino-Velásquez, Anderson
  • Espinosa, Victor
  • Gándara, Fernando de la
  • Ortega, Aurelio
  • Blanco, Edurne
  • Godinho, Luis M.
  • Pérez Arjona, Isabel|||0000-0001-9010-6287
  • Puig Pons, Vicente|||0000-0002-8154-8259
[EN] The swimbladder, when present, is the main contributor to the acoustical target strength (TS) of fish. Numerical modeling of target strength must include swimbladder dimensions, orientation, and shape for the proper estimation of target strength and its directivity. Several Atlantic Bluefin tuna (Thunnus thynnus, ABFT) specimens between 90 and 100 cm of fork length were studied by performing computed tomographic (CT) post-mortems in both fresh and frozen states. ABFT swimbladder 3D models were derived for the first time to be compared with experimental TS measurements through numerical simulation methods, using the Method of Fundamental Solutions (MFS). The numerical estimation (-23.3 dB) agreed with the experimental measurement of TS (-22.1 dB) performed in a tank with tuna with a mean fork length of 100 cm, showing the importance of considering realistic swimbladder shapes and swimming behavior in the numerical simulation of TS., This work was supported by funding from ACTHHUN project grant ref. PID2021-127426OB-C21 was funded by MICIU/AEI/10.13039/501100011033 and the Valencian Government through project ref AICO/2020/064. The authors are grateful to ICTS-ICAR (www.icar.ieo.es (accessed on 20 February 2024)) for the technical assistance. A. Ladino give thanks for the support provided by a research program of Universitat Politecnica de Valencia (PAID) that granted financial support through the scholarship programme FPI subprograma 2 ref. (FPI_UPV_SUB. 2-2018-19-9651), and V. Puig-Pons acknowledges the support of the research program of Universitat Politecnica de Valencia "Access Contracts for Post-Doctoral Researchers (PAID-10-22).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Acute transplantation of NPC on electrospun poly-lactic acid membranes containing curcumin into the injured spinal cord reduces neuronal degeneration

  • Sánchez-Martín, María del Mar
  • Alastrue-Agudo, Ana
  • Moreno-Manzano, Victoria
  • Giraldo, Esther|||0000-0001-5488-3011
  • Gisbert-Roca, Fernando|||0000-0003-3937-5822
  • Martínez-Ramos, Cristina|||0000-0002-6540-4714
  • Monleón Pradas, Manuel|||0000-0001-6457-0414
[EN] Effective spinal cord injury (SCI) treatment remains a significant challenge, given the complex nature of the primary injury and associated devastating loss of neural activity. Neural progenitor cell (NPC)-based therapy has emerged as a potent strategy for the treatment of SCI. However, the invasive nature of direct cell transplantation and the need to enhance graft integration into host tissue remain critical issues. We implemented an improved combinatorial approach to SCI treatment by functionalizing electrospun poly-lactic acid (PLA) membranes that support the sustained delivery of curcumin (PLA-curcumin) and act as a carrier for NPC for local transplantation. In vitro experiments demonstrate that curcumin prevents harmful oxidative and inflammatory stress by preventing death and inhibiting NF-¿B activation (mimicked by treatment with hydrogen peroxide or lipopolysaccharide acid). Curcumin also enhances neurite-like outgrowth in NPC and cortical neurons in culture, which may enhance neural connectivity. In vivo transplantation of NPC on a PLA-curcumin electrospun membrane enables cell migration, reduces injured area size, and increases neuronal fiber preservation to induce a slowing of acute neural damage., The authors declare financial support was received for the research, authorship, and/or publication of this article. This research was funded by FEDER/Ministerio de Ciencia e Innovación Agencia Estatal de Investigación (AEI) PID2021-1243590B-I100 (to VM-M) and PID2021-126612OB-I00 (to MM) funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe, as well as the RISEUP EU grant (Ref. 964562) from FetOpen H2020 program. FG and MM-P acknowledge financing from Vicerrectorado de Investigación de la Universitat Politècnica de València (PAID-10-22). MS-M was supported by a grant from the AEI in the FPI program. Part of the equipment employed in this work was funded by Generalitat Valenciana and co-financed with ERDF funds (OP ERDF of Comunitat Valenciana 2014 2020) and the UE; Fondo Europeo de Desarrollo Regional (FEDER) incluido en el Programa Operativo FEDER de la Comunidad Valenciana 2014-2020.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Polylactic Acid Nanofiber Membranes Grafted with Carbon Nanotubes with Enhanced Mechanical and Electrical Properties

  • Gisbert-Roca, Fernando|||0000-0003-3937-5822
  • Martínez-Ramos, Cristina|||0000-0002-6540-4714
  • Ivashchenko, Sergiy|||0000-0003-1633-4665
  • Garcia-Bernabe, Abel|||0000-0002-9740-0830
  • Compañ Moreno, Vicente|||0000-0001-8233-7472
  • Monleón Pradas, Manuel|||0000-0001-6457-0414
[EN] Electroconductive materials based on poly(lactic acid) (PLA) electrospinning membranes grafted with carbon nanotubes (CNTs) functionalized with the carboxylic group R-COOH have been obtained. PLA electrospun membranes were modified with sulfuric acid (H2SO4) to oxidize its surface to subsequently graft the CNTs, the treatment time and drying of the membranes before grafting with CNTs being critical, influencing the final properties of the materials. SEM images showed that CNTs presented a uniform distribution on the surface of the PLA nanofibers, while FTIR spectra of PLA-CNTs materials revealed characteristic hydroxyl groups, as evidenced by absorption peaks of CNTs. Thanks to the grafting with CNTs, the resulting PLA-CNTs membranes present an improvement of the mechanical and conductive properties when compared with PLA membranes. On the one hand, grafting with CNTs causes the nanofibers to have greater rigidity, so they are more manipulable and can more easily preserve their conformation when stress is exerted. On the other hand, grafting with CNTs allows elimination of the insulating barrier of the PLA, reducing the resistivity and providing high electrical conductivity to the PLA-CNTs membranes. The incorporation of CNTs into PLA electrospun membranes is expected to offer greater functionalities to electrospun composite nanofibers for medical and industrial applications., The authors acknowledge financing from H2020-FETOPEN2018-2019-2020-01 project RISEUP 964562 and from grant PID2021-126612OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe. A.G.-B. acknowledges financing from Vicerrectorado de Investigacion¿ de la Universitat Politenica ¿ de Valencia ¿ (PAID-11-22). F.G.R. and M.M.P. acknowledge financing from Vicerrectorado de Investigacion¿ de la Universitat Politecnica ¿ de Valencia ¿ (PAID10-22). The authors acknowledge the Electron Microscopy Service at the UPV, where the FESEM images were obtained. The authors also acknowledge the help of Leandro Lecca Villacorta in manufacturing of the materials.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Teaching conceptual modelling in the age of LLMs: shifting from model creation to model evaluation skills

  • Snoeck, Monique
  • Pastor López, Oscar|||0000-0002-1320-8471
[EN] When LLMs are used to assist the development of artefact, it may become difficult to distinguish the genuine contribution by the human modeller from the parts that were generated by the LLM. This is not different for conceptual modelling (CM): an LLM may be asked to generate a CM for a given description. To assess a student's modelling competences, it's therefore not sufficient to simply assess the model as an output of their work (i.e. the quality of the created model, along different dimensions). This raises two important questions: How should we assess the modelling capabilities of a student, given that a (large) portion of the model may have been generated by an LLM? And: What skills are needed to create a model? Which ones are essentially human? What if part of these are replaced by LLMs? We posit that when teaching CM, instead of focussing on model creation, we rather need to assess a student's capability of evaluating, refining and improving models according to requirements, technical constraints, etc. This iterative process of evaluating, refining and improving the model is in line with the utility of modelling as instrument of communication instrument, global design and design exploration and constitutes the essence of modelling skill. We thus need to focus on the capability of critically evaluating a model rather than on model creation, and model creation capabilities will naturally follow from these evaluation capabilities. It is our point that this vision will reinforce the benefits of using LLMs for an improved CM teaching practice.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Hybrid Endometrial-Derived Hydrogels: Human Organoid Culture Models and In Vivo Perspectives

  • Gómez-Álvarez, María
  • Bueno-Fernandez, Clara
  • Rodríguez-Eguren, Adolfo
  • Francés-Herrero, Emilio
  • Agustina-Hernández, Marcos
  • Faus, Amparo
  • Galán, Amparo
  • Pellicer, Antonio
  • Ferrero, Hortensia
  • Cervelló, Irene
  • Gisbert-Roca, Fernando|||0000-0003-3937-5822
  • Martínez-Ramos, Cristina|||0000-0002-6540-4714
[EN] The endometrium plays a vital role in fertility, providing a receptive environment for embryo implantation and development. Understanding the endometrial physiology is essential for developing new strategies to improve reproductive healthcare. Human endometrial organoids (hEOs) are emerging as powerful models for translational research and personalized medicine. However, most hEOs are cultured in a 3D microenvironment that significantly differs from the human endometrium, limiting their applicability in bioengineering. This study presents a hybrid endometrial-derived hydrogel that combines the rigidity of PuraMatrix (PM) with the natural scaffold components and interactions of a porcine decellularized endometrial extracellular matrix (EndoECM) hydrogel. This hydrogel provides outstanding support for hEO culture, enhances hEO differentiation efficiency due to its biochemical similarity with the native tissue, exhibits superior in vivo stability, and demonstrates xenogeneic biocompatibility in mice over a 2-week period. Taken together, these attributes position this hybrid endometrial-derived hydrogel as a promising biomaterial for regenerative treatments in reproductive medicine., This work was supported by Instituto de Salud Carlos III and co-founded by the European Union (Fondo Social Europeo), «El FSE invierte en tu futuro» (PI21/00305 [IC]) through the Miguel Servet Program (CP20/00120 [HF]; CP19/00149 [IC]), Ministerio de Universidades (FPU20/00251 [MGÁ], FPU19/04850 [ARE], FPU18/06327 [EFH], MS21-142 [CBF]), Generalitat Valenciana (CIAPOT/2022/29 [MAH], CIPROM/2021/058 [AP and IC]), and Vicerrectorado de Investigación de la Universitat Politècnica de València (PAID-10-22 [FGR]).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Characterization of a Delivery System Based on a Hyaluronic Acid 3D Scaffold and Gelatin Microparticles

  • Martínez-Ramos, Cristina|||0000-0002-6540-4714
  • Monleón Pradas, Manuel|||0000-0001-6457-0414
  • Gisbert-Roca, Fernando|||0000-0003-3937-5822
  • Rodríguez Ruiz, Alejandro
[EN] The objective of this study was to develop and characterize a novel hyaluronic acid (HA) 3D scaffold integrated with gelatin microparticles for sustained-delivery applications. To achieve this goal, the delivery microparticles were synthesized and thoroughly characterized, focusing on their crosslinking mechanisms (vanillin and genipin), degradation profiles, and release kinetics. Additionally, the cytotoxicity of the system was assessed, and its impact on the cell adhesion and distribution using mouse fibroblasts was examined. The combination of both biomaterials offers a novel platform for the gradual release of various factors encapsulated within the microparticles while simultaneously providing cell protection, support, and controlled factor dispersion due to the HA 3D scaffold matrix. Hence, this system offers a platform for addressing injure repair by continuously releasing specific encapsulated factors for optimal tissue regeneration. Additionally, by leveraging the properties of HA conjugates with small drug molecules, we can enhance the solubility, targeting capabilities, and cellular absorption, as well as prolong the system stability and half-life. As a result, this integrated approach presents a versatile strategy for therapeutic interventions aimed at promoting tissue repair and regeneration., The authors acknowledge financing from grant PID2021-126612OB-I00 funded by MCIN/ AEI/10.13039/501100011033 and by the ERDF, A way of making Europe. F.G.R. and M.M.P. acknowledge financing from Vicerrectorado de Investigación de la Universitat Politècnica de València (PAID-10-22). Funding for the open-access charge: CRUE-Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Customized femtosecond laser-inscribed superstructure fiber Bragg grating: A novel approach to decoupling temperature and strain.

  • Sanipatin-Urquizo, Bryan David|||0000-0003-4042-2286
  • Maldonado-Hurtado, Daniel Gustavo|||0000-0001-8585-0271
  • Madrigal-Madrigal, Javier|||0000-0003-3156-1321
  • Barrera Vilar, David|||0000-0002-1700-6842
  • Sales Maicas, Salvador|||0000-0001-9457-976X
  • Sánchez, Luis A.
[EN] This paper introduces a novel technique to simultaneously measure temperature and strain using a single 5 mm femtosecond laser-inscribed superstructure fiber Bragg grating (SFBG). This SFBG enables improved spectral capabilities, resulting in side-resonances within the optical spectrum. The characteristics of the device depend on three key factors: the length of the SFBG, the inscribed FBG¿s periodic perturbations, and the length of the uninscribed sections that compose the entire structure. Initially, mathematical expressions were derived to calculate the separation between the central peak and a resonance on each side, which plays a crucial role in determining the sensor¿s response. Then, a series of complete simulations using OptiGrating software, and a theoretical analysis were performed to comprehend the functioning of this superstructure. Subsequently, the fabrication process employed a femtosecond laser following a point-by-point inscription. Finally obtaining a comprehensive study on the principle, design, simulation, and implementation of the proposed SFBG. The sensitivities of the central Bragg wavelength and the distance between central peak and first-order resonance when applying temperature and strain were calibrated. The results yielded sensitivities for the central Bragg peak of 10.58 pm/°C and 1.1598 pm/µ¿, while the peak-to-resonance distance had sensitivities of 0.3495 pm/°C and 0.03052 pm/µ¿. The different response of both magnitudes makes it possible to distinguish the contributions of strain and temperature within short distances, having the possibility to improve measurements in sensing applications. This study finally provides a critical insight into the design process, as it aligns with the theoretical expectations., This work is partially supported by the I + D + I projects SYNERGY PID2020-118310RB-I00 and INSTILL PID2020-120071RJ-I00 funded by MCIN/AEI/10.13039/501100011033. Also, by the Generalitat Valenciana, Spain, the PROMETEO 2021/015 Research Excellency Award, the IDIFEDER/2020/032, as well as IDIFEDER/2021/050 GV A Infraestructura. D and PAID -10-22 de la Universitat Politecnica de Valencia, Spain. Maldonado- Hurtado is supported by a scholarship PRE2018-085654, funded by MCIN/AEI/10.13039/501100011033, and "ESF Investing in your future.". B. Sanipatin is supported by the Generalitat Valenciana, Spain, the PROMETEO 2021/015.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Lateral Target Strength (TS) Estimation of Free-Swimming Nile Tilapia (Oreochromis niloticus) in Ponds Using a Single-Beam Echosounder

  • Carrillo-La Rosa, Luis Lorenzo
  • Llorens-Escrich, Susana
  • Puig Pons, Vicente|||0000-0002-8154-8259
  • Morell-Monzó, Sergio|||0000-0001-8883-2618
  • Espinosa Roselló, Víctor|||0000-0001-8882-866X
  • Pérez Arjona, Isabel|||0000-0001-9010-6287
[EN] As global aquaculture continues to expand, there is increasing interest in sustainable and non-invasive tools for monitoring fish growth. Nile tilapia (Oreochromis niloticus) is one of the most farmed species worldwide. Its biomass estimation often relies on manual sampling or stereo-camera systems limited by water turbidity. This study establishes a robust relationship between lateral target strength (TS) and the total length (TL) and weight (W) of Nile tilapia using a cost-effective 201 kHz single-beam echosounder. Measurements were conducted with free-swimming fish in a controlled pond environment (TL range, 13¿44 cm). The results show a strong linear correlation between acoustic and biometric data. Specifically, the relationship for mean TS was defined as TSmean = 20.4log(TL) ¿ 68.8 (R2 = 0.93) and TSmean = 6.3log(W) ¿ 55.4 (R2 = 0.96), proving the system¿s accuracy for biomass estimation. Furthermore, the Method of Fundamental Solutions (MFS) was employed for numerical validation based on X-ray morphometry of the swim bladder. Very good agreement was observed between experimental data and numerical simulations, reinforcing the validity of the acoustic models despite the inherent complexity of biological targets. These findings demonstrate that calibrated single-beam acoustic systems provide a viable, non-intrusive tool for real-time monitoring in aquaculture ponds., This study is part of the ThinkInAzul programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana (GVA-THINKINAZUL/2021/009; Principal Investigator: V. Espinosa Rosello, Universitat Politecnica de Valencia). V.P.-P. was supported by a postdoctoral contract from Universitat Politecnica de Valencia (PAID-10-22). S.M.-M. was supported by a postdoctoral contract from Universitat Politecnica de Valencia (PAID-10-25).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Bioengineered Stem Cell-Based Approaches for Spinal Cord Injury: Bio-Functionalized Poly-Lactic Membranes and Optogenetic Modulation to Enhance Neuronal Regeneration

  • Sánchez Martín, María del Mar
[ES] Potenciar la capacidad regenerativa del sistema nervioso central tras una lesión medular (LM) sigue siendo un reto. La interrupción de la interconexión entre el cerebro y los circuitos medulares causa secuelas motoras, sensoriales y autonómicas, como parálisis, pérdida de sensibilidad o disautonomía. Aunque la investigación preclínica ha avanzado, no existen tratamientos clínicos eficaces debido a la complejidad de la fisiopatología y la limitada capacidad regenerativa del sistema nervioso central adulto. Actualmente, las terapias se enfocan en los síntomas y la rehabilitación, sin abordar las causas subyacentes. Las terapias celulares, especialmente con células progenitoras neurales (CPN), destacan como prometedoras gracias a su capacidad para reemplazar células dañadas, brindar apoyo trófico y modular la neuroinflamación. No obstante, persisten retos como la mejora en la supervivencia celular, la diferenciación en tipos funcionales y la promoción de la conectividad sináptica. Es necesario abordar la naturaleza multifacética de la LM mediante enfoques combinados. Esta tesis propone dos estrategias innovadoras para optimizar el uso de CPN en el tratamiento de la LM. En el Capítulo 1, se desarrollaron membranas de ácido poliláctico (PLA) funcionalizadas por electrohilado para liberar de manera sostenida pequeñas moléculas y actuar como soportes para el trasplante de CPN. Las membranas, cargadas con curcumina, compuesta con propiedades neuroprotectoras y antiinflamatorias, mejoran el entorno adverso de la LM. Las membranas PLA-curcumina permiten una liberación sostenida durante las fases críticas de la lesión, protegen a las CPN del estrés oxidativo y reducen la inflamación al inhibir NF-κB. Estudios in vitro mostraron que las CPN adheridas a estas membranas mantenían su capacidad de diferenciación tras la retirada de factores mitóticos. In vivo, las membranas resultaron biocompatibles, promovieron la preservación de fibras neuronales y redujeron el área lesionada, evidenciando su potencial terapéutico. En el Capítulo 2, se exploró la optogenética como herramienta para modular propiedades neuroregenerativas intrínsecas de las CPN de forma controlada en el tiempo. CPN que expresan canalrodopsina-2 (CPN-ChR2) se estimularon con luz azul, aumentando la proliferación y el crecimiento de neuritas en presencia de factores de crecimiento. Al retirarlos, la estimulación favoreció la diferenciación en neuronas y oligodendrocitos, además de astrocitos antiinflamatorios. Las neuronas derivadas de CPN estimuladas mostraron un mayor crecimiento axonal y un fenotipo maduro, lo que refuerza su aplicabilidad in vivo. En el Capítulo 3, se evaluó este enfoque optogenético en un modelo de LM en roedores. CPN-ChR2 se trasplantaron en lesiones incompletas y se estimularon con luz azul durante cuatro semanas. La estimulación mejoró la recuperación funcional motora, promoviendo la supervivencia y diferenciación neuronal de las CPN. Además, se moduló la reactividad astrocítica endógena, preservando poblaciones neuronales y fibras serotoninérgicas. Estas contribuyeron a la recuperación locomotora mediante la inervación de motoneuronas ChAT-positivas. La caracterización electrofisiológica destacó una mayor formación de redes sinápticas funcionales con actividad sincrónica, subrayando la relevancia de la optogenética. En conclusión, esta tesis evidencia el potencial de las terapias con CPN para abordar la LM mediante enfoques combinados que maximizan su capacidad regenerativa. Si bien los resultados son prometedores, se requiere más investigación para garantizar su aplicación clínica y eficacia a largo plazo., [CA] Potenciar la capacitat regenerativa del sistema nerviós central després d'una lesió medul·lar (LM) continua sent un gran repte. La interrupció de la connexió entre el cervell i els circuits medul·lars causa greus seqüeles motores, sensorials i autonòmiques, com paràlisi, pèrdua de sensibilitat o disautonomia. Malgrat els avanços en investigació preclínica, encara no existeixen tractaments clínics efectius, principalment per la complexitat de la fisiopatologia i la limitada capacitat regenerativa del sistema nerviós central adult. Les teràpies actuals se centren en pal·liar els símptomes i rehabilitar, sense abordar les causes subjacents. Les teràpies cel·lulars, especialment les que utilitzen cèl·lules progenitores neurals (CPN), emergeixen com una opció prometedora gràcies a la seua capacitat per reemplaçar cèl·lules danyades, proporcionar suport tròfic i modular la neuroinflamació. Tanmateix, persisteixen desafiaments com la millora en la supervivència cel·lular, la diferenciació en tipus funcionals i la promoció de la connectivitat sinàptica. Per abordar la complexitat de la LM, calen enfocaments combinats. Aquesta tesi planteja dues estratègies innovadores per optimitzar l'ús de les CPN en el tractament de la LM. Al Capítol 1, es van desenvolupar membranes d'àcid polilàctic (PLA) funcionalitzades mitjançant electrofilat per a l'alliberament sostingut de xicotetes molècules i com a suports per al trasplantament de CPN. Les membranes, carregades amb curcumina, un compost amb propietats neuroprotectores i antiinflamatòries, milloren l'entorn advers de la LM. Les membranes PLA-curcumina permeten l'alliberament continu del compost durant les fases aguda i subaguda, protegeixen les CPN de l'estrés oxidatiu i redueixen la inflamació inhibint NF-κB. Els estudis in vitro van demostrar que les CPN adherides a aquestes membranes mantenien la seua capacitat de diferenciació després de la retirada dels factors mitòtics. In vivo, les membranes van resultar biocompatibles, van promoure la preservació de fibres neuronals i van reduir l'àrea lesionada, evidenciant el seu potencial terapèutic. Al Capítol 2, es va explorar l'optogenètica com a eina per modular les propietats neuroregeneratives intrínseques de les CPN de manera controlada en el temps. Les CPN que expressaven canalrodopsina-2 (CPN-ChR2) es van estimular amb llum blava, augmentant la proliferació i el creixement de neurites en presència de factors de creixement. En retirar-los, l'estimulació va afavorir la diferenciació en neurones i oligodendròcits, a més d'astrocits antiinflamatoris. Les neurones derivades de CPN estimulades mostraren un major creixement axonal i un fenotip més madur, reforçant el seu potencial per a aplicacions in vivo. Al Capítol 3, es va avaluar aquest enfocament optogenètic en un model de LM en rosegadors. Les CPN-ChR2 es van trasplantar en lesions incompletes i es van estimular amb llum blava durant quatre setmanes. L'estimulació va millorar la recuperació motora funcional, promovent la supervivència i diferenciació neuronal de les CPN. A més, es va modular la reactivitat astrocítica endògena, preservant poblacions neuronals i fibres serotoninèrgiques. Aquestes fibres contribuïren a la recuperació locomotora mitjançant la inervació de motoneurones ChAT-positives. La caracterització electrofisiològica va destacar una major formació de xarxes sinàptiques funcionals amb activitat sincrònica, subratllant la rellevància translacional de l'optogenètica. En conclusió, aquesta tesi evidencia el potencial de les teràpies amb CPN per abordar la LM mitjançant enfocaments combinats que maximitzen la seua capacitat regenerativa. Tot i que els resultats són prometedors, cal més investigació per garantir la seua aplicació clínica i eficàcia a llarg termini, [EN] Enhancing the regenerative capacity of the central nervous system (CNS) after spinal cord injury (SCI) remains a significant challenge. SCI disrupts communication between the brain and spinal circuits, leading to severe motor, sensory, and autonomic impairments, often resulting in paralysis, loss of sensation, or dysautonomia. Despite advances in preclinical research, no effective clinical treatments are available, largely due to SCI's complex pathophysiology and the limited regenerative capacity of the adult CNS. Current therapeutic approaches focus on symptom management and rehabilitation without addressing the injury's underlying causes. Cell-based therapies, particularly those using neural progenitor cells (NPCs), have emerged as promising strategies for SCI treatment due to their potential to replace damaged cells, provide trophic support, and modulate neuroinflammation. However, challenges persist, including improving NPC survival, guiding differentiation into functional cell types, and promoting synaptic connectivity to enhance recovery. This thesis explores two innovative approaches to optimize NPC use in SCI treatment. Chapter 1 describes electrospun polylactic acid (PLA) membranes functionalized for sustained drug delivery and as scaffolds for NPC transplantation. These membranes were loaded with curcumin, a compound with neuroprotective and anti-inflammatory properties, to improve the hostile post-SCI environment. PLA-curcumin membranes enabled sustained curcumin release during the acute and subacute SCI phases, protecting NPCs from oxidative stress and reducing inflammation by inhibiting NF-κB signaling. In vitro studies showed favorable adhesion and migration of NPCs on the membranes, with retained differentiation capacity after mitogen withdrawal. In vivo, the membranes were biocompatible, supported NPC transplantation, preserved neuronal fibers, and reduced lesion size, demonstrating their therapeutic potential. Chapter 2 introduces optogenetics as a tool to selectively modulate NPCs' intrinsic neuroregenerative properties in a temporally controlled manner. NPCs expressing channelrhodopsin-2 (NPC-ChR2) were stimulated with blue light, enhancing proliferation and neurite outgrowth in the presence of growth factors. Upon growth factor withdrawal, optogenetic stimulation promoted differentiation into neurons and oligodendrocytes while inducing anti-inflammatory astrocyte phenotypes. Optogenetically stimulated NPC-derived neurons exhibited greater axonal growth and branching, indicating a more mature neuronal phenotype, supporting the approach's potential for preclinical applications. Chapter 3 evaluates the translational potential of optogenetics in a rodent SCI model. NPC-ChR2 cells were transplanted into an incomplete SCI model and stimulated daily with blue light for four weeks. Optogenetic stimulation significantly improved motor recovery, enhanced NPC survival, and promoted differentiation into neurons. Additionally, it modulated astrocytic reactivity, fostering a microenvironment conducive to graft integration and repair. This modulation preserved neuronal populations near the injury and serotonergic fibers caudal to the lesion, which innervated ChAT-positive motoneurons, correlating with locomotor improvements. Short propriospinal interneurons rostral to the injury were also preserved. Furthermore, optogenetic stimulation increased excitatory VGlut2 expression in host neurons surrounding the lesion. Electrophysiological characterization revealed the potential of optogenetics to promote functional synaptic networks with enhanced synchronous activity, underscoring its translational relevance. In summary, this thesis highlights the promise of NPC-based therapies as viable and effective interventions for SCI. These approaches significantly enhance NPCs' intrinsic neuroregenerative potential. However, further research is needed to ensure their consistent incorporation into clinical practice., This research was funded by FEDER/Ministerio de Ciencia e Innovación – Agencia Estatal de Investigación (AEI) PID2021-1243590B-I100 (to VMM) and PID2021-126612OB-I00 (to MMP) funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe, as well as the RISEUP EU grant (Ref. 964562) from FetOpen H2020 program. F.G.R. and M.M.P. acknowledge financing from Vicerrectorado de Investigación de la Universitat Politècnica de València (PAID-10-22). María del Mar Sánchez Martin was supported by a grant from the AEI in the FPI program. The Generalitat Valenciana funded part of the equipment employed in this work and co-financed with ERDF funds (OP ERDF of Comunitat Valenciana 2014–2020) and the UE; Fondo Europeo de Desarrollo Regional (FEDER) included in the Programa Operativo FEDER de la Comunidad Valenciana 2014-2020.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

A Novel Method to Decouple Temperature and Strain Using a Customized Femtosecond Laser-inscribed Superstructure Fiber Bragg Grating

  • Sanipatin-Urquizo, Bryan David|||0000-0003-4042-2286
  • Maldonado-Hurtado, Daniel Gustavo|||0000-0001-8585-0271
  • Madrigal-Madrigal, Javier|||0000-0003-3156-1321
  • Barrera Vilar, David|||0000-0002-1700-6842
  • Sales Maicas, Salvador|||0000-0001-9457-976X
[EN] This paper introduces a novel technique to simultaneously measure temperature and strain using a single 5 mm femtosecond laser-inscribed superstructure FBG. Analyzing resonance distances, it allows distinguishing and complements the contributions of strain and temperature, improving measurements in sensing applications., This work is partially supported by the I+D+I projects SYNERGY PID2020-118310RB-I00 and INSTILL PID2020 120071RJ I00 funded by MCIN/AEI/10.13039/501100011033. Also, by the Generalitat Valenciana, the PROMETEO 2021/015 Research Excellency Award, the IDIFEDER/2020/032, as well as IDIFEDER/2021/050 GV A Infraestructura. D and PAID-10-22 de la Universitat Politècnica de València. Maldonado- Hurtado is supported by a scholarship PRE2018-085654, funded by MCIN/AEI/10.13039/501100011033, and ESF Investing in your future. . B. Sanipatin is supported by the Generalitat Valenciana, the PROMETEO 2021/015.