Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 25
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Dynamic Mechanical Properties of 3D Printable Graphene-Polymer Composite as Bipolar Plates in Fuel Cell Applications

  • Lorente-López, Víctor
  • Pérez Feito, Ricardo|||0000-0002-8428-9395
  • Montero Reguera, Álvaro Enrique|||0000-0002-4165-4743
  • Garcia-Bernabe, Abel|||0000-0002-9740-0830
[EN] A graphene¿polymer composite is used in the manufacture by 3D printing of bipolar plates for fuel cells. This composite is formed by a PVDF matrix with graphene. The thermal and dynamic mechanical characterization of this composite is studied, as well as the density of printed composite. The study finds that the material studied is a semicrystal polymer and is thermally stable. Density depends on filler in 3D printing, decreasing with fill percentage. The mechanical properties of these materials are good for fuel cell applications., This work has been funded by the Vicerrectorado de Investigación de la Universitat Politècnica de València (PAID-11-22). The authors thank Prof. Marta Carsi for her assistance in mechanical measurements.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

El arte respuesta como activismo artístico. Ponerse en la Piel: un proyecto participativo de investigación basada en las artes sobre el aislamiento de las personas mayores

  • Marco-Martínez, Patricia
  • Corella Lacasa, Miguel|||0000-0002-9465-6988
[EN] This research presents an art activism and arts-based participatory research project aimed at conveying the feelings of a group of older people living in residential care homes. The project consisted of a virtual exhibition and several intergenerational art-based workshops (online and face-to-face) to raise awareness and sensitize the viewer about this social issue. At the methodological level, questionnaires were used in both experiences (exhibition and workshops) to analyze the impact on viewers and participants. The analysis of the questionnaires informs that the union of both experiences can promote the sensitization and awareness of the exposed topic, being the spectators-participants active as agents of change, using art as a mode of expression and reflection. With this research, we hope to enrich the possibilities that artistic activism has for social transformation by showing, from a concrete experience, how artistic creation can be a hepful tool to express and give meaning to the experience. Likewise, the objective is to propose forms of active participation of the spectator (participating spectator) that turn the artistic experience into an agent of socially committed change., [ES] En esta investigación se presenta un proyecto de activismo artístico y de investigación participativa basada en las artes que tiene por objeto transmitir los sentimientos de un grupo de personas mayores que viven en residencias. El proyecto constó de una exposición virtual y diversos talleres intergeneracionales basados en el arte (formato online y presencial) con el objetivo de sensibilizar y concienciar al espectador sobre esta problemática social. A nivel metodológico, se utilizaron cuestionarios en ambas experiencias (exposición y talleres) para analizar el impacto en los espectadores y participantes. El análisis de los cuestionarios informa de que la unión de ambas experiencias puede promover la sensibilización y concienciación del tema expuesto, siendo los espectadores-participantes activos como agentes de cambio, utilizando el arte como modo de expresión y reflexión. Con esta investigación se espera enriquecer las posibilidades que el activismo artístico tiene para la transformación social mostrando, a partir de una experiencia concreta, cómo la creación artística puede ser una herramienta útil para expresar y dar significado a la experiencia. Así mismo, se persigue el objetivo de proponer formas de participación activa del espectador (espectador participante) que convierten la experiencia artística en un agente de cambio comprometido socialmente.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Particle Swarm Optimization Method for Stand-Alone Photovoltaic System Reliability and Cost Evaluation Based on Monte Carlo Simulation

  • Quiles Cucarella, Eduardo|||0000-0003-0578-4716
  • Roldán-Blay, Carlos|||0000-0001-9459-0563
  • Roldán-Porta, Carlos|||0000-0002-5088-3521
  • Marquina-Tajuelo, Adrián
[EN] In rural regions with limited access to the power grid, self-reliance for electricity generation is paramount. This study focuses on enhancing the design of stand-alone photovoltaic installations (SAPV) to replace conventional fuel generators thanks to the decreasing costs of PV modules and batteries. This study presents a particle swarm optimization (PSO) method for the reliable and cost-effective sizing of SAPV systems. The proposed method considers the variability of PV generation and domestic demand and optimizes the system design to minimize the total cost of ownership while ensuring a high level of reliability. The results show that for the PSO method with 500 iterations, the error is around 2%, and the simulation time is approximately 2.25 s. Moreover, the PSO method allows a much lower number of iterations to be used in the Monte Carlo simulation, with a total of 100 iterations used to obtain the averaged results. The optimization results, encompassing installed power, battery capacity, reliability, and annual costs, reveal the effectiveness of our approach. Notably, our discretized PSO algorithm converges, yielding specific parameters like 9900 W of installed power and a battery configuration of five 3550 Wh units for the case study under consideration. In summary, our work presents an efficient SAPV system design methodology supported by concrete numerical outcomes, considering supply reliability and installation and operational costs., Vicerrectorado de Investigacion de la Universitat Politecnica de Valencia (PAID-11-22)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A New Association Approach for Multi-Sensor Air Traffic Surveillance Data Based on Deep Neural Networks

  • Vico-Navarro, Joaquin|||0000-0001-8608-0280
  • Balbastre Tejedor, Juan Vicente|||0000-0003-4434-8095
  • Vila Carbó, Juan Antonio|||0000-0001-8330-8286
[EN] Air Traffic Services play a crucial role in the safety, security, and efficiency of air transportation. The International Civil Aviation Organization (ICAO) performance-based surveillance concept requires monitoring the actual performance of the surveillance systems underpinning these services. This assessment is usually based on the analysis of data gathered during the normal operation of the surveillance systems, also known as opportunity traffic. Processing opportunity traffic requires data association to identify and assign the sensor detections to a flight. Current techniques for association require expert knowledge of the flight dynamics of the target aircraft and have issues with high-manoeuvrability targets like military aircraft and Unmanned Aircraft (UA). This paper addresses the data association problem through the use of the Multi-Sensor Intelligent Data Association (M-SIOTA) algorithm based on Deep Neural Networks (DNNs). This is an innovative perspective on the data association of multi-sensor surveillance through the lens of machine learning. This approach enables data processing without assuming any dynamics model, so it is applicable to any aircraft class or airspace structure. The proposed algorithm is trained and validated using several surveillance datasets corresponding to various phases of flight and surveillance sensor mixes. Results show improvements in association performance in the different scenarios., This research was conducted with funding from Generalitat Valenciana under an ACIF grant (CIACIF/2021/489), from Vicerrectorado de Investigación at Universitat Politècnica de València (UPV) under a project grant for NEWTECOM (PAID-11-22) and within the framework of the SATERA project, which has received funding from the SESAR 3 Joint Undertaking (JU) under grant agreement Nº 101164313. The JU is supported by the European Union s Horizon Europe research and innovation programme, as well as by the SESAR 3 JU members other than the Union. Funding for open access charge: Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A phylogenetic analysis of the CDKL protein family unravels its evolutionary history and supports the Drosophila model of CDKL5 deficiency disorder

  • María del Carmen
  • Galindo, Máximo Ibo|||0000-0001-8448-9760
  • Palacios-Martínez, Christian
[EN] The human CDK-like (CDKL) family of serine-threonine kinases has five members (CDKL1-5), with a conserved N-terminal kinase domain and variable C-termini. Among these, CDKL5 is of particular interest because of its involvement in CDKL5 deficiency disorder (CDD), a rare epileptic encephalopathy with several comorbidities for which there are no specific treatments. Current CDD vertebrate models are seizure resistant, which could be explained by the genetic background, including leaky expression of other CDKLs. Thus, phylogenetic analysis of the protein family would be valuable for understanding current models and developing new ones. Our phylogenetic studies revealed that ancestral CDKLs were present in all major eukaryotic clades and had ciliary/flagellar functions, which may have diversified throughout evolution. The original CDKL, which was likely similar to human CDKL5, gave rise to the remaining family members through successive duplications. In addition, particular clades have undergone further gene duplication and loss, a pattern that suggests some functional redundancy among them. A separate study focusing on the C-terminal tail of CDKL5 suggested that this domain is only functionally relevant in jawed vertebrates. We have developed a model of CDD in Drosophila based on downregulation of the single Cdkl gene by RNAi, which results in phenotypes similar to those of CDD patients, that are rescued by re-expression of fly Cdkl and human CDKL5. CDKL proteins contain a conserved kinase domain, originally involved in ciliary maintenance; therefore, invertebrate model organisms can be used to investigate CDKL functions that involve the aforementioned domain., The author(s) declare that financial support was received for the research and/or publication of this article. This work was funded by a CDKL5 Pilot Grant Program from the Orphan Disease Center (University of Pennsylvania) and the Loulou Foundation CDKL5 Program of Excellence (CDKL5-23-101-1). Work in the laboratory of MG was also funded by the PAID Program from Universitat Politecnica de Valencia (PAID-11-22) and by the CIAICO Program from Generalitat Valenciana (CIAICO/2022/204). MM-C was supported by a FPU doctoral grant from the Spanish Ministry of Science and Innovation (FPU23/03090). Some of the equipment employed in this work was funded by Generalitat Valenciana and co-financed with ERDF funds (OP ERDF of Comunitat Valenciana 2014-2020).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Behaviour of texture-modified meats using proteolytic enzymes during gastrointestinal digestion simulating elderly alterations

  • Gallego, Marta
  • Grau Meló, Raúl|||0000-0002-0540-5539
  • Talens Oliag, Pau|||0000-0001-7318-3336
[EN] This study aimed to apply different proteolytic enzymes (bromelain, papain, and flavourzyme) to develop texture-modified meats suitable for people with chewing or swallowing problems. The samples were categorised at level 6 (soft and bite-sized food) of the dysphagia diet, characterised in terms of physicochemical and textural parameters, and evaluated for their behaviour during gastrointestinal digestion simulating elderly alterations. In general, the enzyme-treated samples had lower moisture content, weight, and diameter of the piece of meat, and presented colour differences compared to the control samples. Textural analyses did not show significant differences in terms of hardness and cohesiveness for the texture-modified meats, while flavourzyme-treated samples presented less elasticity. Instrumental mastication assay showed the breakdown of samples' structure mainly during the first mastication cycles, with flavourzyme-treated samples presenting slightly higher consistency. The protein digestibility of the meats greatly increased after simulated gastrointestinal digestion, but a decrease in proteolysis for the control and papain-treated samples in the altered gastric model and an increase for flavourzyme-treated samples in the altered both gastric and intestinal model were shown compared to standard conditions. These results allow integrating knowledge to design foods that better meet the requirements of dysphagics or elderly people., M.G. gratefully thanks the Postdoctoral grant (PAID-10-19) from the Universitat Politecnica de Valencia. Authors acknowledge Vicerrectorado de Investigacion de la Universitat Politecnica de Valencia (PAID-11-22) for the financial support. Funding for open access charge: CRUE-Universitat Politecnica de Valencia
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Polynomial approximations for the matrix logarithm with computation graphs

  • Jarlebring, Elias
  • Sastre, Jorge|||0000-0002-8612-6717
  • Ibáñez González, Jacinto Javier|||0000-0002-6912-4453
[EN] The most popular method for computing the matrix logarithm is a combination of the inverse scaling and squaring method in conjunction with a Padé approximation, sometimes accompanied by the Schur decomposition. The main computational effort lies in matrix-matrix multiplications and left matrix division. In this work we illustrate that the number of such operations can be substantially reduced, by using a graph based representation of an efficient polynomial evaluation scheme. A technique to analyze the rounding error is proposed, and backward error analysis is adapted. We provide substantial simulations illustrating competitiveness both in terms of computation time and rounding errors., Work supported by the Vicerrectorado de Investigación de la Universitat Politècnica de València (PAID-11-21 and PAID-11-22) and by the KTH Royal Institute of Technology in Stockholm.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Advanced exergy analysis of a Reverse Brayton cycle using air as working fluid for cryogenic purposes

  • Serrano, J.R.|||0000-0003-0692-3917
  • Dolz, Vicente|||0000-0003-1511-6957
  • Gómez-Vilanova, Alejandro|||0000-0002-6627-7075
  • López-Carrillo, Juan Antonio|||0000-0003-0613-6470
[EN] The global push to reduce greenhouse gas emissions has led to the ban of high global warming potential (GWP) refrigerants in the refrigeration sector, prompting the adoption of low-GWP alternatives. However, as regulations are expected to tighten, technologies like the Reverse Brayton cycles (RBC) are emerging. RBCs can operate with safe fluids and can reach very low temperatures through compressions, regeneration, and expansion, requiring only electricity. This research presents results from an RBC equipped with a radial turbine using natural air (R-729), a hazard-free fluid with zero ozone depletion potential (ODP) and emission potential. The cycle utilizes automotive components, offering a cost-effective, high-tech solution. The study evaluates the cycle COP at a design point and performs an exergetic analysis at 173K. Using a thermal and fluid dynamic model of the cycle, the critical components of the cycle influencing the COP are identified, and potential improvements are explored., The authors want to acknowledge the institution "Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital de la Generalitat Valenciana" and its grant program "Subvenciones para la contratacion de personal investigador de caracter predoctoral" for doctoral studies (CIACIF/2021/404) funded by The European Union; also the institution "Vicerrectorado de Investigacion de la Universitat Politecnica de Valencia" for the funding provided by the research project (PAID-11-22) ". This work has been partially supported by Grant PID2021-123351OB-I00 funded by MCIN/AEI/10.13039/501100011033 and, as appropriate, by "ERDF A way of making Europe".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Embracing strategic knowledge for developing a methodological framework for parametric modeling quality

  • Aranburu, Aritz
  • Justel, Daniel
  • Company, Pedro
  • Camba, Jorge D.
  • Contero, Manuel|||0000-0002-6081-9988
[EN] In Model-Based Enterprise environments, 3D CAD models - specifically, native parametric solid models - become the primary carriers of design information for engineering and manufacturing activities. It is therefore critical that these assets are built to the highest levels of quality and explicitly meet the requirements for being: 1) usable, the model is valid, and it represents, without error, all the significant geometric aspects; 2) reusable, the model is consistent and concise and reasonable changes are facilitated; and 3) information-rich, the model clearly communicates its design intent both implicitly and explicitly with annotations. Current practices for parametric associative CAD modeling, however, barely address usability and only consider reusability at the simplest and most basic level. In this paper, we discuss the inherent limitations of current modeling methodologies and identify the challenges involved in creating a fully comprehensive strategy. Finally, we outline the basis of a theoretical framework that aims to overcome these issues., This work was supported by a grant provided by the Vice-rectorate for Research from Universitat Politècnica de València (PAID-11-22) and project PID2022-137254OB-I00, funded by MCIN/AEI/10.13039/501100 011033/FEDER, UE.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Two-Level High-Resolution Structural Topology Optimization with Equilibrated Cells

  • MERLI GISBERT, RAFAEL|||0000-0003-1987-4683
  • Ródenas, Juan José|||0000-0003-2195-7920
  • Bosch-Galera, Marc|||0000-0002-4286-6721
  • Nadal, Enrique|||0000-0002-2808-298X
  • Martínez-Martínez, Antolín
[EN] In today's industry, the rapid evolution in the design and development of optimized mechanical components to meet customer requirements represents a significant challenge for companies. These companies seek efficient solutions to enhance their products in terms of stiffness and strength. One powerful approach is Topology Optimization, which aims to determine the optimal material distribution within a predefined domain to maximize the overall component's stiffness. Achieving high-resolution solutions is also crucial for accurately defining the final material distribution. While standard Topology Optimization tools can propose optimal solutions for entire components, they struggle with small-scale details (such as trabecular structures) due to prohibitive computational costs. To address this issue, our proposed approach introduces a two-level topology optimization methodology considering density-based techniques. The proposed methodology includes three steps: The first one subdivides the whole component in cells and generates a coarse optimized low-definition material distribution, assigning a different density to each cell. Since the output stresses from the coarse problem are not equilibrated into each cell, they must not be directly used in the fine level. Thus, the second step uses the equilibrating traction recovery approach to convert the cell nodal forces into equilibrated lateral tractions over the cell boundary. Finally, taking as input data the densities from the coarse optimization and imposing these lateral tractions as Neumann boundary conditions, each cell is optimized at fine level. The main goal of this work is to efficiently solve high-resolution topology optimization problems using a two-level mechanically-continuous method, which would be unaffordable with standard computing facilities and the current techniques.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Methodology for the assessment of the risk of failure of metastatic vertebrae through ROM-based patient-specific simulations

  • García-Andrés, Francesc Xavier
  • Arana Fernandez de Moya, Estanislao
  • Nadal, Enrique|||0000-0002-2808-298X
  • Gandía-Vañó, Blai|||0000-0001-7243-624X
  • Ródenas, Juan José|||0000-0003-2195-7920
[EN] The structural performance of a vertebra can be significantly undermined if it develops a tumour, that could even lead to the vertebra's structural collapse. In cancers with a high prevalence of spinal metastasis, like prostate and breast cancer, this supposes an additional problem to account for on top of the regular treatment. In this work, we propose a patient-specific methodology capable of immediately predicting the structural behaviour and risk of failure of a vertebra with a spherical tumour of arbitrary characteristics. This immediate evaluation of the results, together with the ease of use of the proposed methodology, that includes the creation of a personalized computational model from a CT scan of the patient's vertebra, makes this methodology suitable for its use in clinical practice. By running several personalized structural analyses of vertebrae with simulated tumours, using the Cartesian grid FEM (cgFEM) in combination with the Sparse Subspace Learning (SSL) technique, we generate a surrogate model of the vertebra. This model is able to predict the vertebra's behaviour for different tumour growth scenarios, and could be useful as a clinical decision support tool., The authors gratefully acknowledge the financial support of the Agencia Estatal de Investigación (PEJ2018-003672-A-AR), Generalitat Valenciana (Prometeo/2021/046), Ministerio de Universidades, Universitat Politècnica de València and European Union-Next generation EU (Margarita Salas, MS/35), Vicerrectorado de Investigación de la Universitat Politècnica de València (PAID-11-22) and Universitat Politècnica de València for the Programa de Ayudas de Investigación y Desarrollo (PAID-01-22).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental COP optimization procedure in an air-based reverse Brayton cycle for cryogenic applications

  • Serrano, J.R.|||0000-0003-0692-3917
  • García-Cuevas González, Luis Miguel|||0000-0001-9340-0617
  • Gómez-Vilanova, Alejandro|||0000-0002-6627-7075
  • López-Carrillo, Juan Antonio|||0000-0003-0613-6470
[EN] Sustainable and efficient refrigerants are essential due to increasing regulatory constraints on traditional highGWP refrigerants. This study investigates the potential of natural refrigerants, specifically air, in Reverse Brayton Cycles (RBC) for low-temperature applications. Unlike carbon dioxide and ammonia, which pose limitations and safety concerns below - 40 degrees C, air offers a safer and more versatile solution due to its excellent thermodynamic properties and availability. An experimental RBC was constructed using automotive components like centrifugal compressors, a radial turbine, and inter-coolers. These cost-effective and accessible components shift the refrigeration paradigm. The RBC was tested to optimize the Coefficient of Performance (COP) at - 100 degrees C C while dissipating 2 kW, a typical scenario for whole-body cryotherapy (WBC). Key control parameters included the pressure ratio of the centrifugal compressors and the position of the stator vanes in the variable geometry turbine (VGT). The optimization process resulted in a COP increase of up to 28%. Additionally, a 1D gas-dynamic model validated these results, suggesting that different component selections could enhance performance by 17 % compared to the experimental optimum point. Air-based RBC systems using automotive components can effectively achieve temperatures below - 40 degrees C, offering a viable, eco-friendly alternative to traditional refrigerants. This advancement addresses regulatory challenges and contributes to the scientific community by providing a sustainable refrigeration solution using commercially available components and demonstrating improvements through experimental data., The authors want to acknowledge the institution "Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital de la Generalitat Valenciana"and its grant program "Subvenciones para la contratacion de personal investigador de caracter predoctoral"for doctoral studies (CIACIF/2021/404) funded by The European Union; also the institution "Vicerrectorado de Investigacion de la Universitat Politecnica de Valencia" for the funding provided by the research project (PAID-11-22) ". This research has been supported by Grant CIPROM/2021/061 funded by Generalitat Valenciana, Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Assessing the Feasibility of Removing Graffiti from Railway Vehicles Using Ultra-Freezing Air Projection

  • Vega-Bosch, Aina|||0000-0001-6977-2373
  • Santamarina-Campos, V.|||0000-0002-6151-8271
  • Bosch-Roig, Pilar|||0000-0003-2019-399X
  • López-Carrillo, Juan Antonio|||0000-0003-0613-6470
  • Dolz, Vicente|||0000-0003-1511-6957
  • Sánchez Pons, Mercedes|||0000-0003-4653-7885
[EN] Unauthorised graffiti is a challenge in urban environments, affecting railway structures, stations, tracks, and vehicles. Inefficient cleaning methods increase the costs and downtime of railcars, limiting passenger transport. In turn, they are harmful to the operator¿s health and the environment, due to the VOCs they release. This study focuses on the feasibility of dry-ice blasting, replacing carbon dioxide with ambient air as an innovative and sustainable solution to remove graffiti from rail vehicles. Experimental tests have been carried out with 13 different aerosols, controlling the temperature (<¿80 °C), pressure (up to 3 bar), projection distance (0.5 cm) and exposure times (30¿/1¿/2¿/4¿/6¿/8¿/++). The results showed that ultra-freezing with ambient air preserved the integrity of the support materials and altered the topography, colourimetry and adhesion of the aerosols tested, achieving the total removal of one of the paints. Preliminary results suggest that ultra-freezing with ambient air could be a viable and sustainable solution for graffiti removal on railway structures, transferable to other urban environments., The authors would like to acknowledge the support received for this research from the Vice-Rectorate for Research of the Polytechnic University of Valencia (PAID-11-22), grant number PID2022-139433OB-I00, as well as the collaboration with Istobal S.A., facilitated by the ISTOBAL Chair of the Polytechnic University of Valencia (UPV). In addition, the authors would like to express their gratitude to CEICE-GVA and its grant Programme for Doctoral Studies (CIACIF/2021/404), funded by the European Union.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Polylactic Acid Nanofiber Membranes Grafted with Carbon Nanotubes with Enhanced Mechanical and Electrical Properties

  • Gisbert-Roca, Fernando|||0000-0003-3937-5822
  • Martínez-Ramos, Cristina|||0000-0002-6540-4714
  • Ivashchenko, Sergiy|||0000-0003-1633-4665
  • Garcia-Bernabe, Abel|||0000-0002-9740-0830
  • Compañ Moreno, Vicente|||0000-0001-8233-7472
  • Monleón Pradas, Manuel|||0000-0001-6457-0414
[EN] Electroconductive materials based on poly(lactic acid) (PLA) electrospinning membranes grafted with carbon nanotubes (CNTs) functionalized with the carboxylic group R-COOH have been obtained. PLA electrospun membranes were modified with sulfuric acid (H2SO4) to oxidize its surface to subsequently graft the CNTs, the treatment time and drying of the membranes before grafting with CNTs being critical, influencing the final properties of the materials. SEM images showed that CNTs presented a uniform distribution on the surface of the PLA nanofibers, while FTIR spectra of PLA-CNTs materials revealed characteristic hydroxyl groups, as evidenced by absorption peaks of CNTs. Thanks to the grafting with CNTs, the resulting PLA-CNTs membranes present an improvement of the mechanical and conductive properties when compared with PLA membranes. On the one hand, grafting with CNTs causes the nanofibers to have greater rigidity, so they are more manipulable and can more easily preserve their conformation when stress is exerted. On the other hand, grafting with CNTs allows elimination of the insulating barrier of the PLA, reducing the resistivity and providing high electrical conductivity to the PLA-CNTs membranes. The incorporation of CNTs into PLA electrospun membranes is expected to offer greater functionalities to electrospun composite nanofibers for medical and industrial applications., The authors acknowledge financing from H2020-FETOPEN2018-2019-2020-01 project RISEUP 964562 and from grant PID2021-126612OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe. A.G.-B. acknowledges financing from Vicerrectorado de Investigacion¿ de la Universitat Politenica ¿ de Valencia ¿ (PAID-11-22). F.G.R. and M.M.P. acknowledge financing from Vicerrectorado de Investigacion¿ de la Universitat Politecnica ¿ de Valencia ¿ (PAID10-22). The authors acknowledge the Electron Microscopy Service at the UPV, where the FESEM images were obtained. The authors also acknowledge the help of Leandro Lecca Villacorta in manufacturing of the materials.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Procesos creativos y relacionales en personas mayores durante la pandemia por COVID-19: proyecto de arteterapia, Creative and relational processes in older adults during the COVID-19 pandemic. Art therapy project

  • Marco-Martínez, Patricia
  • Redolat, Rosa
  • Corella Lacasa, Miguel|||0000-0002-9465-6988
[ES] La pandemia por Covid-19 y las medidas de aislamiento para prevenir el contagio se asociaron con un impacto negativo en la salud y bienestar, especialmente en personas mayores. El presente proyecto tuvo como principal objetivo identificar si una intervención de arteterapia durante el periodo de la pandemia podría tener beneficios en un grupo de personas de edad avanzada (5 mujeres de 77 a 92 años) que vivían en un entorno rural. En primer lugar, se examinaron las consecuencias cognitivas y psicológicas que la pandemia pudo provocar en las usuarias y, posteriormente, se analizaron los efectos de la arteterapia sobre las principales dificultades que las participantes habían manifestado en evaluación inicial. Se utilizó una investigación de métodos mixtos (cuantitativos y cualitativos). Los resultados sugieren que la intervención dio lugar a mejoras en concentración y atención, identificación emocional, reducción de la ansiedad y aumento de las relaciones sociales. Además, la práctica artística, implementada a partir de propuestas concretas, favoreció el desarrollo de la capacidad creadora y la estimulación cognitiva y sensorial. Este estudio aporta conocimientos e implicaciones sobre los posibles efectos de la arteterapia en personas mayores en circunstancias de crisis y aislamiento social como las experimentadas en el periodo de pandemia., [EN] The Covid-19 pandemic and the isolation measures to prevent infection were associated with a negative impact on health and well-being, especially in older people. The main objective of the present project was to identify whether an art therapy intervention during the pandemic could benefit a group of people at advanced ages (5 women aged 77 to 92 years) living in a rural setting. We first examined the cognitive and psychological consequences of the pandemic on the clients and then examined the effects of art therapy on the main difficulties reported by the participants during the initial assessment. Mixed methods of research (quantitative and qualitative) were applied. The findings of this study suggest that the intervention resulted in possible improvements in concentration and attention, emotional identification, reduced anxiety, and increased social relationships. In addition, an artistic practice through concrete proposals favored the development of creative ability, cognitive and sensory stimulation. This study provides knowledge and implications on the possible effects of art therapy in older people in circumstances of crisis and social isolation, such as those experienced during the pandemic.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

BEM Turbine Model and PID Control System of a Floating Hybrid Wind and Current Turbines Integrated Generator System

  • Tamarit-Peris, Fernando-Mauricio|||0000-0003-0933-4958
  • Quiles Cucarella, Eduardo|||0000-0003-0578-4716
  • Correcher Salvador, Antonio|||0000-0002-2443-9857
  • García Moreno, Emilio
[EN] This is a new installment in the series of publications that describe the mathematical modeling of the Floating Hybrid Generator Systems Simulator (FHYGSYS) tool. This work presents an improved mathematical model of the turbines of the floating hybrid system-consisting of an "OC3-Hywind" wind turbine and two marine current turbines-presented by the authors in previous publications. In this third installment, the modeling of the three turbines of the floating hybrid system is described using the Blade Element Momentum (BEM) theory. This modeling allows one to replace the one based on the One-Dimensional theory used in previous installments. For the operation of modeling with BEM, it has been considered necessary to implement a continuous feedback control system. In this case, two PID (proportional-integral-derivative) controllers have been implemented in each of the turbines. The first controls the torque on the turbine generator and the second controls the collective pitch angle of the blades. The results obtained are presented and validated through a code-to-code comparison with simulations carried out with FASTv8 under the same conditions and with the operating results of marine current turbines that exist in the literature. This improvement in the mathematical model offers the possibility of implementing other types of controllers that allow for the testing of different strategies of the floating hybrid control system, with the aim of maximizing energy production while ensuring the structural stability of the floating hybrid system., Funding for open access charge: Vicerrectorado de Investigación de la Universitat Politècnica de València (PAID-11-22).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Computing the Matrix Logarithm with the Romberg Integration Method

  • Ibáñez González, Jacinto Javier|||0000-0002-6912-4453
  • Alonso Abalos, José Miguel|||0000-0001-6812-7364
  • Defez Candel, Emilio|||0000-0002-3303-6371
  • Alonso-Jordá, Pedro|||0000-0002-6882-6592
  • Sastre, Jorge|||0000-0002-8612-6717
[EN] The matrix logarithm function has applicability in many engineering and science fields. Improvements in its calculation, from the point of view of both accuracy and/or execution time, have a direct impact on these disciplines. This paper describes a new numerical algorithm devoted to matrix logarithm computation and using the Romberg integration method, together with the inverse scaling and squaring technique. This novel method was implemented and compared with three different state-of-the-art codes, all based on Padé approximation. The experimental results, under a heterogeneous matrix test battery, showed that the new method was numerically stable, with an elapsed time midway among the other codes, and it generally offered a higher accuracy., This research was funded by the Vicerrectorado de Investigación de la Universitat Politècnica de València (PAID-11-22).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Composition of Powdered Freeze-Dried Orange Juice Co-Product as Related to Glucose Absorption In Vitro

  • Camacho Vidal, Mª Mar|||0000-0002-2342-2105
  • García Martínez, Eva María|||0000-0003-0624-3911
  • Martínez-Navarrete, Nuria|||0000-0001-8345-8495
  • Martínez-Lahuerta, Juan José
  • Ustero, Isabel
[EN] The reuse of food by-products is crucial for the well-being of the planet. Considering the high content of nutrients and other bioactive compounds in many of them, investigating their suitability for use as human food ingredients is an interesting challenge. In this study, in addition to the proximate composition, phenol content and antioxidant activity (AOA = 3.2 mmol Trolox equivalent (TE)/100 g, db) of orange juice powder by-product (CoP), different in vitro properties related to carbohydrate metabolism have been characterised. Specifically, the glycaemic index (GI), the glycaemic load (GL), the glucose dialysis retardation index (GDRI = 13.6%), the glucose adsorption capacity (GAC = 22.5 mM) and the inhibition capacity of ¿-amylase (¿-A = 46.9%) and ¿-glucosidase (¿-G = 93.3%) of powdered orange juice waste have been determined and related to fibre and phenolics composition. Taking advantage of the high fibre content of the by-product (36.67%), its GL was calculated for a CoP dose that allows labelling the food to which it is added as a source of fibre. The low GI value (24.4%) and the low GL (0.918 g available carbohydrates per serving) allowed us to conclude that the product studied could be an interesting opportunity for the food industry to offer it as a healthy food ingredient to be included in the diet, especially for those suffering from type 2 diabetes mellitus. Of the total phenolic compounds (TP = 509 mg equivalent of gallic acid (GAE)/100 g, db), 68% were found in free fraction (FP), and their contribution to the total AOA was 40.6%, while this was 54.9% for the 32% of phenols bound to plant tissues (BP).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Efficient and Sustainable Cleaning: A Comparative Analysis of Cryogenic Technology

  • Vega-Bosch, Aina|||0000-0001-6977-2373
  • Santamarina-Campos, V.|||0000-0002-6151-8271
  • Osete Cortina, Laura|||0000-0003-0709-5885
  • Sánchez Pons, Mercedes|||0000-0003-4653-7885
  • Bosch-Roig, Pilar|||0000-0003-2019-399X
[EN] Dry ice blasting is a technology that has been widely studied and applied in different industrial sectors as an alternative to the use of solvent, water, or abrasive spraying methods. It is a CO2 spraying system capable of balancing efficiency and sustainability with a wide variety of equipment available on the market. This study analyses and compares cryo-cleaning equipment manufactured by pioneering companies in the cryogenic industry. Based on data sheets, safety data sheets, and contact with manufacturers, a quantitative comparative study has been carried out. The aim of this study is to identify those with the best performance, efficiency, and adaptability to operational and environmental requirements. The results reflect the strengths and weaknesses of the equipment in terms of occupational safety and operability. These have been discussed and evaluated, recognising improvements of this technology, which is capable of removing surface layers of different natures without altering the underlying substrate., The authors would like to acknowledge the support received for this research from the Vice-Rectorate for Research of the Polytechnic University of Valencia (PAID-11-22), grant number PID2022-139433OB-I00, as well as the collaboration with Istobal S.A., facilitated by the ISTOBAL Chair of the Polytechnic University of Valencia (UPV). Funding for open access charge: Universitat Politecnica de Valencia
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

In Vitro Bioaccessibility of Bioactive Compounds of Freeze-Dried Orange Juice Co-Product Formulated with Gum Arabic and Modified Starch

  • García Martínez, Eva María|||0000-0003-0624-3911
  • Camacho Vidal, Mª Mar|||0000-0002-2342-2105
  • Martínez-Navarrete, Nuria|||0000-0001-8345-8495
[EN] The large amount of waste generated by the orange juice industry has sparked the interest of many researchers in incorporating recycling systems and following a much more sustainable circular economy model. This work proposes the valorization of the co-product generated in the orange juice extraction industry after freeze-drying for its subsequent reuse as a natural ingredient in the food industry. In addition, the possible protective effect of gum Arabic and corn starch esterified with octenyl succinic groups, in proportions optimised in previous studies 0.25 and 0.45 g/g orange co-product dry solutes, on the main bioactive compounds of orange peel during the freeze-drying process has been studied. The samples were characterised for their content of vitamin C (ascorbic and dehydroascorbic acids), flavonoids (hesperidin and narirutin), total phenols and total carotenoids, as well as their antioxidant capacity (DPPH and FRAP assays). In addition, samples were digested, mimicking the human enzymatic oral gastro-intestinal digestion process, and the bioaccessibility of the bioactive compounds was evaluated. It was observed that the addition of both biopolymers improved the stability of the hydrophilic compounds during freeze-drying. This conservative effect was more remarkable for higher biopolymer concentrations. However, no protective effect on carotenoid compounds was observed. This trend was reflected in the antioxidant activity of the different samples. In addition, the incorporation of biopolymers improved the bioaccessibility of the bioactive compounds studied. In conclusion, the results supported the feasibility of the freeze-dried orange juice co-product as a natural, sustainable source of health-promoting compounds., This research was funded by Vicerrectorado de Investigación, Universitat Politècnica de València (PAID-11-21; PAID-11-22) (Spain).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Patient-specific numerical simulation of the bone healing process including implant materials and gait conditions

  • Martínez-Martínez, Antolín
  • Bonete-Lluch, Daniel
  • Allix, Olivier
  • Nadal, Enrique|||0000-0002-2808-298X
  • Ródenas, Juan José|||0000-0003-2195-7920
[EN] Numerical simulations in biomechanics, particularly in bone healing, present a cost-effective option compared to experiments that demand prolonged observations with human or with animal models. However, to define in-silico simulations of the bone healing process requires considering multiple factors, such as the implant design and patient¿s characteristics. As a result, the current challenge is integrating different numerical methodologies to simulate bone healing, aiming to facilitate the emergence of innovative clinical treatments and new implant designs. In this paper, we present a patient-specific numerical methodology to simulate the bone healing process, able to consider patient¿s load conditions and bone density distribution provided by CT-scans. The main novelty is the combination of the Cartesian grid Finite Element Method (cgFEM) with a bone callus healing model, complemented by a load-condition optimisation scheme to relate implant materials and load conditions while ensuring successful healing outcome. This numerical methodology creates a finite element model based on the patient¿s medical image, serving as a virtual testing tool for investigating the influence of implant materials on gait pattern requirements to ensure an optimal healing outcome. In practice, a personalised bone fracture model was employed to evaluate four distinct implant materials: two conventional materials (stainless steel and titanium) and two bioabsorbable candidates (polylactic acid plastic (PLA) and magnesium). The results offer personalised optimal load conditions for each studied material, showcasing the potential of in-silico studies in minimising uncertainties associated with exploring new clinical treatments., The authors gratefully acknowledge the financial support of Ministerio de Educación; Formación Profesional (FPU19/02103), Generalitat Valenciana, Spain (Prometeo/2021/046 and CIAICO/2021/226) and Vicerrectorado de Investigación de la Universitat Politècnica de València (PAID-11-22).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Feasibility assessment of a low-cost near-infrared spectroscopy-based prototype for monitoring polyphenol extraction in fermenting musts

  • Alfieri, Gianmarco
  • Riggi, Riccardo
  • Modesti, Margherita
  • Bellincontro, Andrea
  • Renzi, Francesco
  • Aleixandre Tudo, José|||0000-0002-0586-7370
[EN] BACKGROUND: The winemaking industry increasingly relies on non-destructive techniques to support processing activities, particularly in response to climate change-induced imbalances between technological and phenolic grape maturity. Spectroscopy-based instruments have become widely available for monitoring key parameters such as total polyphenols, anthocyanins and tannins during maceration and fermentation. Near-infrared (NIR) spectroscopy presents a promising solution for rapid and efficient analysis, potentially enhancing process control and decision-making in winemaking.DISCUSSION: This study evaluates the feasibility of a low-cost NIR spectroscopy-based prototype for monitoring phenolic extraction in small-scale fermentations. The device's performance was assessed by correlating spectral data with conventional reference measurements, including total polyphenol index, tannin concentration, colour intensity, anthocyanins and polymeric pigments. Predictive models were developed using partial least squares regression and compared with those obtained from a commercial Fourier transform (FT)-NIR spectrophotometer to assess the prototype's accuracy and reliability.CONCLUSION: The results indicate that the low-cost NIR prototype shows potential for monitoring phenolic extraction during fermentation, providing real-time and non-destructive measurements. While its predictive performance was slightly lower than that of the commercial FT-NIR system, the prototype demonstrated promising accuracy, suggesting that with further optimization it could serve as a cost-effective alternative for wineries seeking rapid and affordable phenolic analysis. (c) 2025 The Author(s). Journal of the Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry., The authors acknowledge the Vicerrectorado de Investigacion of the Universitat Politecnica de Valencia (PAID-11-22) and the Spanish Ministry of Universities (BG20/00021) for financial support. Furthermore, the authors acknowledge the project 'VioLOC - Wine and Oil Analysis 4.0: development of a Lab-On-Chip with remote connectivity. Open access publishing facilitated by Universita degli Studi della Tuscia, as part of the Wiley - CRUI-CARE agreement.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Design methodology and simulation analysis of hybrid fuel cell and battery systems for powering unmanned aircraft systems

  • Marqués, Raúl
  • Montero Reguera, Álvaro Enrique|||0000-0002-4165-4743
  • Sánchez-Diaz, Carlos|||0000-0003-0913-725X
  • Quintanilla García, Israel|||0000-0003-0059-5975
[EN] Hybrid fuel cell and battery systems are currently among the most promising options for increasing the flight autonomy of unmanned aircraft systems. The ratio between the size of the battery and the fuel cell is a delicate issue in power system design. Both devices are necessary; the battery, with a quick response, to respond to demand peaks, and the fuel cell, with a slow dynamic response, but greater energy density, to increase its au tonomy. One of the most important tasks in designing the hybrid system is selecting the appropriate size of each component so that it can respond to peak demands, extend its autonomy as far as possible and reduce its weight. The purpose of this research was to establish a design procedure for hybrid power systems for unmanned aerial systems, which means selecting the best size for each component. The hybrid system¿s modeling and the dynamic simulation of its response to demand curves are the foundation of this procedure. The simulation results include the consumption of the fuel cell as a function of time, the battery¿s charge status and an estimate of its autonomy for each demand curve. The analysis of the simulation results guides the choice of component size, adapting each one to achieve minimum fuel consumption for the characteristic demand curves for which the unmanned aircraft system is designed. After modeling the components of the hybrid system and describing the simulation pro cedure, this contribution proposes an example of a design for an unmanned aircraft system with a maximum takeoff weight of 20 kg. In this case, the most appropriate size for the fuel cell was 2000 W and a 3000 mAh 10S Lithium-Polymer battery. Fitted with a 12-liter hydrogen tank, stored at a maximum pressure of 300 bar, an estimated autonomy of 1.5 h can be expected., This work was funded by the Vicerrectorado de Investigacion de la Universitat Politecnica de Valencia (PAID-11-21 and PAID-11-22).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Feasibility of Forward Osmosis to Recover Textile Dyes Using Single Salts and Multicomponent Draw Solutions

  • Cifuentes-Cabezas, Magdalena
  • García-Suarez, Laura
  • Soler Cabezas, José Luis|||0000-0002-4610-3369
  • Cuartas Uribe, Beatriz Elena|||0000-0003-2835-900X
  • Alvarez Blanco, Silvia
  • Mendoza Roca, José Antonio
  • Vincent Vela, Maria Cinta|||0000-0001-8493-0165
[EN] The textile industry generates large volumes of water characterized mainly by an intense color coming from dyes that are difficult to process due to their synthetic base and the presence of aromatic components. Due to the stricter regulation on the discharge of these effluents, in order to reduce dye waste before discharge into natural channels, alternatives are being sought to manage this wastewater. In this work, the concentration of dyes in simulated wastewater from the textile industry was studied by forward osmosis (with a cellulose triacetate CTA membrane), with the aim of concentrating the dye for its future recovery and reincorporation into the production process. Two dyes of different nature were evaluated to study the efficiency of the proposed process, using NaCl and reverse osmosis brine from a model seawater desalination solution as extraction solutions. It was observed that dye type (reactive or direct) and their charge influence the color rejection with the forward osmosis membrane used. It was able to concentrate the dyes in the feed solution up to approximately 55% with the reverse osmosis brine from the model seawater desalination solution. Finally, the results demonstrate that the FO process is a promising option for concentrating dyes present in wastewater from the textile industry in order to reuse them in the dyeing process., The authors acknowledge the financial support of Project PID2022-138299OB-I00 funded by MCIN/ AEI / 10.13039/501100011033 / FEDER, UE and PAID-11-22 within the framework of the Programme of the Vice-Rectorate for Research of the Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Feasibility assessment of a low-cost visible spectroscopy-based prototype for monitoring polyphenol extraction in fermenting musts

  • Alfieri, Gianmarco
  • Modesti, Margherita
  • Bellincontro, Andrea
  • Renzi, Francesco
  • Aleixandre Tudo, José|||0000-0002-0586-7370
[EN] BACKGROUNDPolyphenols have long been used to evaluate grape and wine quality and it is necessary to measure them throughout various winemaking stages. They are currently assessed predominantly through analytical methods, which are characterized by time-consuming procedures and environmentally harmful practices. Non-destructive spectroscopy-based devices offer an alternative but they tend to be costly and not readily accessible for smaller wineries. This study introduces the initial steps in employing a portable, user-friendly, and cost-effective visible (VIS) spectrophotometer prototype for direct polyphenol measurement during winemaking. RESULTSGrapes (cv Syrah, Bobal, and Cabernet Sauvignon) at different maturation stages were fermented with or without stems. Throughout fermentation, parameters such as color intensity, total polyphenol index, total anthocyanins, and tannins were monitored. Concurrently, VIS spectra were acquired using both the prototype and a commercial instrument. Chemometric approaches were then applied to establish correlation models between spectra and destructive analyses. The prototype models demonstrated an acceptable level of confidence for only a few parameters, indicating their lack of complete reliability at this stage. CONCLUSIONSVisible spectroscopy is already utilized for polyphenol analysis in winemaking but the aspiration to automate the process in wineries, particularly with low-cost devices, remains unrealized. This study investigates the feasibility of a low-cost and user-friendly spectrophotometer. The results indicate that, in the early stages of prototype utilization, the goal is attainable but requires further development and in-depth assessments. (c) 2024 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry., The authors acknowledge the Vicerrectorado de Investigacion of the Universitat Politecnica de Valencia (PAID-11-22) and the Spanish Ministry of Universities (BG20/00021) for financial support. They also acknowledge the project 'VioLOC-Wine and Oil Analysis 4.0: development of a Lab-On-Chip with remote connectivity (FISR2019_03020 VIOLoC)'.