Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Multifunctionalized zirconium-based MOF as a novel support for dispersed copper, application in CO2 adsorption and catalytic conversion

  • Rosado, Albert|||0000-0003-3222-9566
  • Popa, Ioana-Maria
  • Abo Markeb, Ahmad|||0000-0003-4385-0198
  • Moral-Vico, Javier|||0000-0002-6795-3450
  • Naughton, Eva Maria|||0000-0003-2120-1584
  • Eckhardt, Hans-Georg
  • Ayllón, José A.|||0000-0001-7965-7424
  • López-Periago, Ana M.|||0000-0002-3777-3205
  • Domingo, Concepción|||0000-0001-7857-2760
  • Negahdar, Leila|||0000-0002-9119-6445
CO2 conversion and utilization for global sustainability is an integral part of greenhouse gases management, typically for the production of fuels and specialty chemicals. Added value products, such as methanol, methane or formate, can be obtained by electrocatalysis and thermocatalysis, the two techniques addressed in this study. The main motivation of this study is to develop a copper based catalyst active in both processes, confronting the main concerns regarding typical metal catalysts related to nanoparticles aggregation and concomitant deactivation. For this, modified NU-1000, a water-stable mesoporous MOF, is used as a platform for the simultaneous coordination-stabilization of copper single atoms and CO2 adsorption. NU-1000 is synthetized with primary amino groups (-NH2 with affinity for CO2) by modifying the ligand prior to MOF synthesis, while post-synthetic solvent-assisted ligand incorporation is applied to insert thiol functionalities (-SH with affinity for copper) within the framework. To make the functionalized MOF catalytically active, a Cu2+ salt is impregnated into the MOF channels, which is further reduced with H2 to Cu+/Cu0 before performance assessment in CO2 conversion processes. The as-synthetized and spent catalysts were analysed regarding the structure (X-ray diffraction, infrared), bulk (mass spectrometry) and surface (X-ray photoelectron spectroscopy) composition, morphology (electronic microscopy and energy dispersive spectroscopy) and textural properties (N2 physisorption). The electrocatalytic reduction of CO2 was performed in the potential range of -0.8 to -1.8 V, indicating the formation of formic acid. Thermocatalytic experiments were carried out in an economically and energetically sustainable low-pressure (1 MPa) hydrogenation process. Methanol was obtained with 100% selectivity at temperatures up to 280 °C, and a space-time yield of ca. 100 mgMeOH gcat-1 h-1 which overcomes that of commercial CuZnO NPs designed for this purpose.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Hydrophobic post-functionalization of a water instable bioMOF, Effect on CO2 and water adsorption

  • Rosado, Albert|||0000-0003-3222-9566
  • Borrás Caballero, Alejandro|||0000-0002-0725-421X
  • Suárez-García, Fabián|||0000-0002-1970-293X
  • Vallcorba Valls, Oriol|||0000-0001-6499-7688
  • López-Periago, Ana M.|||0000-0002-3777-3205
  • Ayllón, José A.|||0000-0001-7965-7424
  • Domingo, Concepción|||0000-0001-7857-2760
The preparation of highly porous metal organic frameworks (MOFs) chemically resistant to water is essential for the forthcoming use of these materials as adsorbents in applications of gas separation under moisture or for wastewater remediation. However, most of the synthesized MOFs have a framework with low thermodynamic stability against water. MOFs modification performed in this work aims to modify the water behavior by addressing kinetic factors affecting the dissolution reaction rate. For this purpose, a post-synthetic process is designed to functionalize MOF particles on the surface with a hydrophobic compound, particularly, stearic acid. The microporous bioMOF CaSyr-1, recently synthesized in our laboratories, was selected as a case study. Pristine CaSyr-1 transforms in water into a second crystalline phase, CaSyr-2 with a non-porous structure resolved in this work. An external surface coating method was chosen to prevent the bioMOF from water-induced degradation, while preserving the internal empty volume to a large extent, thus almost not affecting the adsorption capacity. The developed synthetic method allows the straightforward assembly of the composite CaSyr-1/stearate into a monolithic aerogel with a multimodal porosity. The significant enhancement of the kinetic stability of the hydrophobized CaSyr-1 with respect to the parent bioMOF was demonstrated by structural and morphological analysis. Textural properties and adsorption capacities of CaSyr-1/stearate were evaluated with different adsorbates, including N CO and HO. In particular, significant water adsorption was attained in the coated MOF without affecting the integrity of the framework. Besides, water adsorption works as an effective activation method for the composite by displacing stearic acid adsorbed inside CaSyr-1 pores. As a consequence, CO adsorption at room temperature in the water-activated sample was enhanced by a factor of two with respect to the vacuum-activated sample, reaching and uptake of 31 cm of CO per gram of adsorbent.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Green Supercritical CO2 Synthesis of [Copper Clusters@FeBTC]@rGO Catalyst for Highly Efficient Hydrogenation of CO2 to Methanol

  • Kubovics, Márta|||0000-0002-2441-8562
  • Borrás Caballero, Alejandro|||0000-0002-0725-421X
  • Abo Markeb, Ahmad|||0000-0003-4385-0198
  • Marbán, Gregorio|||0000-0002-8387-3282
  • Moral-Vico, Javier|||0000-0002-6795-3450
  • Sánchez, Antoni|||0000-0003-4254-8528
  • López-Periago, Ana M.|||0000-0002-3777-3205
  • Domingo, Concepción|||0000-0001-7857-2760
In the vast majority of studies, methanol production via CO hydrogenation is realized using bifunctional catalysts, commonly CuZnO phases. The basic motivation of this study is to confront main concerns regarding typical copper-based catalysts, which are the aggregation of the active metal nanoparticles (NPs) and its concomitant deactivation. For this, an extensive research on composites of mesoporous iron trimesate metal-organic frameworks (MOFs) [crystalline MIL-100(Fe) and semiamorphous FeBTC], loaded with copper clusters (CuCs) into the pores, is performed, because it is a pioneer in the area. The growth and aggregation of CuCs are hindered by the confinement of the active entities into the MOF mesocages. From the two studied MOFs, only the copper loaded semiamorphous FeBTC behaves as a catalyst. To further enhance the catalytic activity, CuCs@FeBTC NPs are dispersed on the plates constituting a reduced graphene-oxide aerogel. Main steps in the preparation of these complex catalysts involve the use of sustainable technology based on supercritical CO, used either as a solvent or drying agent. The reduction strategy designed to obtain the active catalyst (Cu to Cu/Cu in CuCs) was crucial to upgrade the end product performance. A double reduction route, applying ascorbic acid preceding thermal H reduction, turns out to be necessary to attain a significant catalytic activity of the confined Cu species. The as-synthesized and spent catalysts were analyzed in regard of the structure (X-ray diffraction, infrared), bulk (mass spectrometry) and surface (X-ray photoelectron spectroscopy) composition, morphology (microscopy and energy dispersive spectroscopy) and textural properties (N physisorption). The catalytic performance of reduced CuCs@FeBTC and [CuCs@FeBTC]@rGO composites was tested in the CO hydrogenation reaction at 10 bar. Methane and methanol were obtained as valuable reaction products. When using the [CuCs@FeBTC]@rGO aerogel, methanol yield was noticeably high, in comparison to reported data, in the order of 86 mgg h; while the amount of side products (methane, CO) was almost totally hindered up to 260 °C.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multifunctionalized zirconium-based MOF as a novel support for dispersed copper: application in CO2 adsorption and catalytic conversion

  • Rosado, Albert
  • Popa, Ioana-Maria
  • Markeb, Ahmad Abo
  • Moral Vico, Javier
  • Naughton, Eva Maria
  • Eckhardt, Hans-Georg
  • Ayllón, Jose A.
  • López Periago, Ana M.
  • Domingo Pascual, M. Concepción
  • Negahdar, Leila
CO2 conversion and utilization for global sustainability is an integral part of greenhouse gases management, typically for the production of fuels and specialty chemicals. Added value products, such as methanol, methane or formate, can be obtained by electrocatalysis and thermocatalysis, the two techniques addressed in this study. The main motivation of this study is to develop a copper based catalyst active in both processes, confronting the main concerns regarding typical metal catalysts related to nanoparticles aggregation and concomitant deactivation. For this, modified NU-1000, a water-stable mesoporous MOF, is used as a platform for the simultaneous coordination-stabilization of copper single atoms and CO2 adsorption. NU-1000 is synthetized with primary amino groups (-NH2 with affinity for CO2) by modifying the ligand prior to MOF synthesis, while post-synthetic solvent-assisted ligand incorporation is applied to insert thiol functionalities (-SH with affinity for copper) within the framework. To make the functionalized MOF catalytically active, a Cu2+ salt is impregnated into the MOF channels, which is further reduced with H-2 to Cu+/Cu-0 before performance assessment in CO2 conversion processes. The as-synthetized and spent catalysts were analysed regarding the structure (X-ray diffraction, infrared), bulk (mass spectrometry) and surface (X-ray photoelectron spectroscopy) composition, morphology (electronic microscopy and energy dispersive spectroscopy) and textural properties (N-2 physisorption). The electrocatalytic reduction of CO2 was performed in the potential range of -0.8 to -1.8 V, indicating the formation of formic acid. Thermocatalytic experiments were carried out in an economically and energetically sustainable low-pressure (1 MPa) hydrogenation process. Methanol was obtained with 100% selectivity at temperatures up to 280 degrees C, and a space-time yield of ca. 100 mg(MeOH) g(cat)(-1) h(-1) which overcomes that of commercial CuZnO NPs designed for this purpose., The UCD school of chemistry is acknowledged for financial support. The authors acknowledge the support of Spanish Ministry of Science and Innovation through the Severo Ochoa Program for Centers of Excellence (CEX2019-000917-S), the Spanish National Plan of Research with project PID2020-115631GB-I00 and Ecological Transition and Digital Transition Projects TED2021-1298378-C41 and TED2021-130407B-I00. A. A. Markeb is the recipient of a postdoctoral fellowship from the Spanish Ministerio de Universidades, María Zambrano ID 715364. This work has been performed in the framework of the doctoral program “Chemistry” of the UAB by A.R. that acknowledges the financial support of a FPI 2019 grant., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Green Supercritical CO2 Synthesis of [Copper Clusters@FeBTC]@rGO Catalyst for Highly Efficient Hydrogenation of CO2 to Methanol

  • Kubovics, Márta
  • Borrás, Alejandro
  • Markeb, Ahmad Abo
  • Marbán Calzón, Gregorio
  • Moral Vico, Javier
  • Sánchez, Antoni
  • López Periago, Ana M.
  • Domingo Pascual, M. Concepción
In the vast majority of studies, methanol production via CO2 hydrogenation is realized using bifunctional catalysts, commonly CuZnO phases. The basic motivation of this study is to confront main concerns regarding typical copper-based catalysts, which are the aggregation of the active metal nanoparticles (NPs) and its concomitant deactivation. For this, an extensive research on composites of mesoporous iron trimesate metal-organic frameworks (MOFs) [crystalline MIL-100(Fe) and semiamorphous FeBTC], loaded with copper clusters (CuCs) into the pores, is performed, because it is a pioneer in the area. The growth and aggregation of CuCs are hindered by the confinement of the active entities into the MOF mesocages. From the two studied MOFs, only the copper loaded semiamorphous FeBTC behaves as a catalyst. To further enhance the catalytic activity, CuCs@FeBTC NPs are dispersed on the plates constituting a reduced graphene-oxide aerogel. Main steps in the preparation of these complex catalysts involve the use of sustainable technology based on supercritical CO2, used either as a solvent or drying agent. The reduction strategy designed to obtain the active catalyst (Cu2+ to Cu+/Cu0 in CuCs) was crucial to upgrade the end product performance. A double reduction route, applying ascorbic acid preceding thermal H2 reduction, turns out to be necessary to attain a significant catalytic activity of the confined Cu2+ species. The as-synthesized and spent catalysts were analyzed in regard of the structure (X-ray diffraction, infrared), bulk (mass spectrometry) and surface (X-ray photoelectron spectroscopy) composition, morphology (microscopy and energy dispersive spectroscopy) and textural properties (N2 physisorption). The catalytic performance of reduced CuCs@FeBTC and [CuCs@FeBTC]@rGO composites was tested in the CO2 hydrogenation reaction at 10 bar. Methane and methanol were obtained as valuable reaction products. When using the [CuCs@FeBTC]@rGO aerogel, methanol yield was noticeably high, in comparison to reported data, in the order of 86 mgMeOHgCu-1 h-1; while the amount of side products (methane, CO) was almost totally hindered up to 260 °C., This work was supported by the Spanish Ministry of Science and Innovation through the Severo Ochoa Program for Centers of Excellence (CEX2019-000917-S), the Spanish National Plan of Research with project PID2020-115631GB-I00 and Ecological Transition and Digital Transition Projects TED2021-1298378-C41 and TED2021-130407B-I00. A.M.L., C.D. and M.K. acknowledge the financial support of the CSIC platform SusPlast 20219PT059. G.M.́M. acknowledges the financial support provided by Principado de Asturias (IDI/2021/000096). A. A. Markeb is the recipient of a postdoctoral fellowship from the Spanish Ministerio de Universidades, María Zambrano ID 715364., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hydrophobic post-functionalization of a water instable bioMOF: Effect on CO2 and water adsorption

  • Rosado, Albert
  • Borrás, Alejandro
  • Suárez García, Fabián
  • Vallcorba, Oriol
  • López Periago, Ana M.
  • Ayllón, José A.
  • Domingo Pascual, M. Concepción
The preparation of highly porous metal organic frameworks (MOFs) chemically resistant to water is essential for the forthcoming use of these materials as adsorbents in applications of gas separation under moisture or for wastewater remediation. However, most of the synthesized MOFs have a framework with low thermodynamic stability against water. MOFs modification performed in this work aims to modify the water behavior by addressing kinetic factors affecting the dissolution reaction rate. For this purpose, a post-synthetic process is designed to functionalize MOF particles on the surface with a hydrophobic compound, particularly, stearic acid. The microporous bioMOF CaSyr-1, recently synthesized in our laboratories, was selected as a case study. Pristine CaSyr-1 transforms in water into a second crystalline phase, CaSyr-2 with a non-porous structure resolved in this work. An external surface coating method was chosen to prevent the bioMOF from water-induced degradation, while preserving the internal empty volume to a large extent, thus almost not affecting the adsorption capacity. The developed synthetic method allows the straightforward assembly of the composite CaSyr-1/stearate into a monolithic aerogel with a multimodal porosity. The significant enhancement of the kinetic stability of the hydrophobized CaSyr-1 with respect to the parent bioMOF was demonstrated by structural and morphological analysis. Textural properties and adsorption capacities of CaSyr-1/stearate were evaluated with different adsorbates, including N<inf>2,</inf> CO<inf>2</inf> and H<inf>2</inf>O. In particular, significant water adsorption was attained in the coated MOF without affecting the integrity of the framework. Besides, water adsorption works as an effective activation method for the composite by displacing stearic acid adsorbed inside CaSyr-1 pores. As a consequence, CO<inf>2</inf> adsorption at room temperature in the water-activated sample was enhanced by a factor of two with respect to the vacuum-activated sample, reaching and uptake of 31 cm<sup>3</sup> of CO<inf>2</inf> per gram of adsorbent., This work was supported by the Spanish Ministry of Science and Innovation through the Severo Ochoa Program for Centers of Excellence (CEX2023–001263-S), the Spanish National Plan of Research with project PID2020-115631GB-I00 and Ecological Transition and Digital Transition Project TED2021-1298378-C41. This work has been performed in the framework of the doctoral program “Chemistry” of the UAB by A.R. that acknowledges the financial support of an FPI 2019 grant. We acknowledge the thorough language and text revision performed by Rosy Sunday., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed