Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 13
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

A novel Cu-based catalyst supported in chitosan nanoparticles for the hydrogenation of carbon dioxide to methanol, from the optimization of the catalyst performance to the reaction mechanism

  • Vali, Seyed Alireza|||0000-0002-0124-9321
  • Abo Markeb, Ahmad|||0000-0003-4385-0198
  • Moral-Vico, Javier|||0000-0002-6795-3450
  • Font, Xavier|||0000-0003-4981-7436
  • Sánchez, Antoni|||0000-0003-4254-8528
Chitosan nanoparticles were used as a support for the Cu-based catalyst to convert carbon dioxide to methanol under mild conditions. A statistically significant model for space-time yield (STY) and selectivity as a function of synthesis-related parameters was achieved, predicting optimal values of pH, Cu and chitosan concentrations to be 9.3, 0.088 M and 0.01 M, respectively. A STY of 92.44 mg g h and a selectivity higher than 90% were obtained. A constant reaction yield was obtained for 140 min and the STY only decreased by 18%. Catalyst's reusability was demonstrated for three cycles with a 20% of STY loss.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Multifunctionalized zirconium-based MOF as a novel support for dispersed copper, application in CO2 adsorption and catalytic conversion

  • Rosado, Albert|||0000-0003-3222-9566
  • Popa, Ioana-Maria
  • Abo Markeb, Ahmad|||0000-0003-4385-0198
  • Moral-Vico, Javier|||0000-0002-6795-3450
  • Naughton, Eva Maria|||0000-0003-2120-1584
  • Eckhardt, Hans-Georg
  • Ayllón, José A.|||0000-0001-7965-7424
  • López-Periago, Ana M.|||0000-0002-3777-3205
  • Domingo, Concepción|||0000-0001-7857-2760
  • Negahdar, Leila|||0000-0002-9119-6445
CO2 conversion and utilization for global sustainability is an integral part of greenhouse gases management, typically for the production of fuels and specialty chemicals. Added value products, such as methanol, methane or formate, can be obtained by electrocatalysis and thermocatalysis, the two techniques addressed in this study. The main motivation of this study is to develop a copper based catalyst active in both processes, confronting the main concerns regarding typical metal catalysts related to nanoparticles aggregation and concomitant deactivation. For this, modified NU-1000, a water-stable mesoporous MOF, is used as a platform for the simultaneous coordination-stabilization of copper single atoms and CO2 adsorption. NU-1000 is synthetized with primary amino groups (-NH2 with affinity for CO2) by modifying the ligand prior to MOF synthesis, while post-synthetic solvent-assisted ligand incorporation is applied to insert thiol functionalities (-SH with affinity for copper) within the framework. To make the functionalized MOF catalytically active, a Cu2+ salt is impregnated into the MOF channels, which is further reduced with H2 to Cu+/Cu0 before performance assessment in CO2 conversion processes. The as-synthetized and spent catalysts were analysed regarding the structure (X-ray diffraction, infrared), bulk (mass spectrometry) and surface (X-ray photoelectron spectroscopy) composition, morphology (electronic microscopy and energy dispersive spectroscopy) and textural properties (N2 physisorption). The electrocatalytic reduction of CO2 was performed in the potential range of -0.8 to -1.8 V, indicating the formation of formic acid. Thermocatalytic experiments were carried out in an economically and energetically sustainable low-pressure (1 MPa) hydrogenation process. Methanol was obtained with 100% selectivity at temperatures up to 280 °C, and a space-time yield of ca. 100 mgMeOH gcat-1 h-1 which overcomes that of commercial CuZnO NPs designed for this purpose.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Advances, trends and challenges in the use of biochar as an improvement strategy in the anaerobic digestion of organic waste, a systematic analysis

  • Parra, Brayan|||0000-0001-9256-6797
  • Soto, Jonathan|||0000-0002-9211-6435
  • Oviedo-Ocaña, Edgar Ricardo|||0000-0002-8970-7322
  • Vali, Seyed Alireza|||0000-0002-0124-9321
  • Sánchez, Antoni|||0000-0003-4254-8528
A recently strategy applied to anaerobic digestion (AD) is the use of biochar (BC) obtained from the pyrolysis of different organic waste. The PRISMA protocol-based review of the most recent literature data from 2011-2022 was used in this study. The review focuses on research papers from Scopus® and Web of Knowledge®. The review protocol used permits to identify 169 articles. The review indicated a need for further research in the following challenges on the application of BC in AD: i) to increase the use of BC in developing countries, which produce large and diverse amounts of waste that are the source of production of this additive; ii) to determine the effect of BC on the AD of organic waste under psychrophilic conditions; iii) to apply tools of machine learning or robust models that allow the process optimization; iv) to perform studies that include life cycle and technical-economic analysis that allow identifying the potential of applying BC in AD in large-scale systems; v) to study the effects of BC on the agronomic characteristics of the digestate once it is applied to the soil and vi) finally, it is necessary to deepen in the effect of BC on the dynamics of nitrogen and microbial consortia that affect AD, considering the type of BC used. In the future, it is necessary to search for new solutions in terms of the transport phenomena that occurs in AD with the use of BC using robust and precise mathematical models at full-scale conditions.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

CO2 Hydrogenation to Methanol over Novel Melamine-Based Polyaminal Porous Polymer Coordinated to Cu-Based Catalyst

  • Ali, Laila S.A.
  • Abo Markeb, Ahmad|||0000-0003-4385-0198
  • Moral-Vico, Javier|||0000-0002-6795-3450
  • Font, Xavier|||0000-0003-4981-7436
  • Artola, Adriana|||0000-0002-0524-2119
The catalytic conversion of carbon dioxide to methanol is significantly important both practically and scientifically for the reduction in CO emissions. Furthermore, it can partially address the issue of human reliance on non-renewable resources. The main motivation of this study is to use a melamine polymer network to support a copper-based catalyst for CO hydrogenation to methanol. Based on Schiff base chemistry, a facile catalyst-free process, a novel porous polyaminal polymer (MGPN) was prepared with nitrogen contents as high as 38%. MGPN was used as a support for Cu-based catalyst and applied in CO hydrogenation to CHOH under mild conditions. A deep characterization of the MGPN@CuO/ZnO/AlO catalyst was made through FTIR, N adsorption-desorption, SEM-EDS, TEM, TGA, XRD, CO-TPD, and H-TPR techniques. The CO hydrogenation study was performed in a fixed bed reactor with a residence time of 1.104 s on varying parameters such as the metal loading, catalyst amount, flow rate, pressure, calcination temperatures, reduction temperatures, and catalytic reaction temperature profile. The space-time yield (STY) of 145.43 mgg ·h, a selectivity of 98.36%, and CO conversion of 11.76% were obtained under an economically and energetically sustainable low-pressure (1 MPa) and 260 °C hydrogenation process.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Assessing the impact of zero-valent iron nanoparticles on the semi-continuous anaerobic digestion of sewage sludge under the inherent variability of the influent

  • Moyano, David|||0009-0005-0717-8762
  • Vargas-García, María del Carmen|||0000-0002-7647-3395
  • Barrena, Raquel|||0000-0002-6077-7765
  • Sánchez, Antoni|||0000-0003-4254-8528
  • Font, Xavier|||0000-0003-4981-7436
The effect of nanoscale zero-valent iron (nZVI) addition was assessed during the anaerobic digestion (AD) of sewage sludge, considering the inherent variability of sludge over time. Preliminary batch experiments determined the most appropriate nZVI addition strategy, followed by a semi-continuous experiment (292 days in 2 L digesters) evaluating different nZVI concentrations (0.3, 0.7, and 1 g L-1) while tracking organic loading rate (OLR) fluctuations due to influent variability. Under semi-continuous operation, nZVI addition increased methane concentrations (2.7-10.8 %) proportional to dosage, but decreased biogas yields (3.6-13.6 %) and volatile solids (VS) reduction (4.9-15.7 %). Methane yields showed a marginal response (-4.2 % to +2.9 % increase), which, combined with the effect on VS reduction, suggests an increased methane potential when dosing nZVI. Variability in results using the same nZVI concentrations was partially attributed to OLR changes, ranging from 0.8 to 1.9 g VS L-1 day-1, as confirmed by a Generalised Linear Mixed Model, revealing a close interaction between OLR and nZVI dosing affecting methane yield. This study demonstrated a lasting influence of nZVI addition on AD, further supported by microbial analysis, which highlighted the prevalence of hydrogenotrophic methanogenesis in nZVI-dosed digesters, linked to higher methane concentrations and lower VS reduction. Overall, this research shows that methane yield in the semi-continuous anaerobic digestion of sewage sludge is influenced by the interaction between nZVI addition and OLR and, consequently, both factors must be studied simultaneously under realistic AD operation conditions.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Novel nanocomposite synthesis of carboxymethyl cellulose coated to zero-valent iron supported on chitosan for simultaneous removal of heavy metals and pesticides in water, performance and mechanism

  • Abo Markeb, Ahmad|||0000-0003-4385-0198
  • Moral-Vico, Javier|||0000-0002-6795-3450
  • Sánchez, Antoni|||0000-0003-4254-8528
  • Font, Xavier|||0000-0003-4981-7436
This study reports the synthesis and performance of a novel nanocomposite, CS@nZVI-CMC NC, consisting of zero-valent iron nanoparticles cross-linked to chitosan and coated to carboxymethyl cellulose. Also, the novelty of this work has been proven by eliminating several heavy metals and pesticides from aqueous solutions and drinking water simultaneously. The NC structure, morphology, size, and functional groups were investigated using advanced techniques such as TEM, SEM, XRD, FTIR, and BET. It showed that the surface area of the NC is found to be 127.95 m/g and a pore volume of 0.659 cm/g. A spherical shape of the nanoparticles with an average size of 8 ± 2 nm was obtained. The functional groups of the NC such as the [sbnd]NH, [sbnd]OH, [sbnd]C[dbnd]O, and [sbnd]CN were demonstrated using the FTIR analysis. The NC shows 96.91 %, 90.00 %, 60.61 %, 52.73 %, and 40.43 % simultaneous removal of Cr(VI), As(V), Cd(II), Pb(II) and Mn(II), respectively. Also, it demonstrates a significant simultaneous elimination of organochlorine pesticides: DDE, heptachlor, endrin aldehyde, endosulfan, and heptachlor epoxide, being 98.52 %, 94.01 %, 70.98 %, 65.39 %, and 63.02 % the elimination percentage, respectively. In addition, the NC exhibited the highest removal (77.09 %) of parathion methyl when simultaneously removing several organophosphorus pesticides. Adsorption mechanisms for the targeted pollutants were also studied, and adsorption and electron transfer were the predominant mechanisms. Therefore, this novel NC could be a promising water and wastewater treatment adsorbent.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Green Supercritical CO2 Synthesis of [Copper Clusters@FeBTC]@rGO Catalyst for Highly Efficient Hydrogenation of CO2 to Methanol

  • Kubovics, Márta|||0000-0002-2441-8562
  • Borrás Caballero, Alejandro|||0000-0002-0725-421X
  • Abo Markeb, Ahmad|||0000-0003-4385-0198
  • Marbán, Gregorio|||0000-0002-8387-3282
  • Moral-Vico, Javier|||0000-0002-6795-3450
  • Sánchez, Antoni|||0000-0003-4254-8528
  • López-Periago, Ana M.|||0000-0002-3777-3205
  • Domingo, Concepción|||0000-0001-7857-2760
In the vast majority of studies, methanol production via CO hydrogenation is realized using bifunctional catalysts, commonly CuZnO phases. The basic motivation of this study is to confront main concerns regarding typical copper-based catalysts, which are the aggregation of the active metal nanoparticles (NPs) and its concomitant deactivation. For this, an extensive research on composites of mesoporous iron trimesate metal-organic frameworks (MOFs) [crystalline MIL-100(Fe) and semiamorphous FeBTC], loaded with copper clusters (CuCs) into the pores, is performed, because it is a pioneer in the area. The growth and aggregation of CuCs are hindered by the confinement of the active entities into the MOF mesocages. From the two studied MOFs, only the copper loaded semiamorphous FeBTC behaves as a catalyst. To further enhance the catalytic activity, CuCs@FeBTC NPs are dispersed on the plates constituting a reduced graphene-oxide aerogel. Main steps in the preparation of these complex catalysts involve the use of sustainable technology based on supercritical CO, used either as a solvent or drying agent. The reduction strategy designed to obtain the active catalyst (Cu to Cu/Cu in CuCs) was crucial to upgrade the end product performance. A double reduction route, applying ascorbic acid preceding thermal H reduction, turns out to be necessary to attain a significant catalytic activity of the confined Cu species. The as-synthesized and spent catalysts were analyzed in regard of the structure (X-ray diffraction, infrared), bulk (mass spectrometry) and surface (X-ray photoelectron spectroscopy) composition, morphology (microscopy and energy dispersive spectroscopy) and textural properties (N physisorption). The catalytic performance of reduced CuCs@FeBTC and [CuCs@FeBTC]@rGO composites was tested in the CO hydrogenation reaction at 10 bar. Methane and methanol were obtained as valuable reaction products. When using the [CuCs@FeBTC]@rGO aerogel, methanol yield was noticeably high, in comparison to reported data, in the order of 86 mgg h; while the amount of side products (methane, CO) was almost totally hindered up to 260 °C.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multifunctionalized zirconium-based MOF as a novel support for dispersed copper: application in CO2 adsorption and catalytic conversion

  • Rosado, Albert
  • Popa, Ioana-Maria
  • Markeb, Ahmad Abo
  • Moral Vico, Javier
  • Naughton, Eva Maria
  • Eckhardt, Hans-Georg
  • Ayllón, Jose A.
  • López Periago, Ana M.
  • Domingo Pascual, M. Concepción
  • Negahdar, Leila
CO2 conversion and utilization for global sustainability is an integral part of greenhouse gases management, typically for the production of fuels and specialty chemicals. Added value products, such as methanol, methane or formate, can be obtained by electrocatalysis and thermocatalysis, the two techniques addressed in this study. The main motivation of this study is to develop a copper based catalyst active in both processes, confronting the main concerns regarding typical metal catalysts related to nanoparticles aggregation and concomitant deactivation. For this, modified NU-1000, a water-stable mesoporous MOF, is used as a platform for the simultaneous coordination-stabilization of copper single atoms and CO2 adsorption. NU-1000 is synthetized with primary amino groups (-NH2 with affinity for CO2) by modifying the ligand prior to MOF synthesis, while post-synthetic solvent-assisted ligand incorporation is applied to insert thiol functionalities (-SH with affinity for copper) within the framework. To make the functionalized MOF catalytically active, a Cu2+ salt is impregnated into the MOF channels, which is further reduced with H-2 to Cu+/Cu-0 before performance assessment in CO2 conversion processes. The as-synthetized and spent catalysts were analysed regarding the structure (X-ray diffraction, infrared), bulk (mass spectrometry) and surface (X-ray photoelectron spectroscopy) composition, morphology (electronic microscopy and energy dispersive spectroscopy) and textural properties (N-2 physisorption). The electrocatalytic reduction of CO2 was performed in the potential range of -0.8 to -1.8 V, indicating the formation of formic acid. Thermocatalytic experiments were carried out in an economically and energetically sustainable low-pressure (1 MPa) hydrogenation process. Methanol was obtained with 100% selectivity at temperatures up to 280 degrees C, and a space-time yield of ca. 100 mg(MeOH) g(cat)(-1) h(-1) which overcomes that of commercial CuZnO NPs designed for this purpose., The UCD school of chemistry is acknowledged for financial support. The authors acknowledge the support of Spanish Ministry of Science and Innovation through the Severo Ochoa Program for Centers of Excellence (CEX2019-000917-S), the Spanish National Plan of Research with project PID2020-115631GB-I00 and Ecological Transition and Digital Transition Projects TED2021-1298378-C41 and TED2021-130407B-I00. A. A. Markeb is the recipient of a postdoctoral fellowship from the Spanish Ministerio de Universidades, María Zambrano ID 715364. This work has been performed in the framework of the doctoral program “Chemistry” of the UAB by A.R. that acknowledges the financial support of a FPI 2019 grant., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Green Supercritical CO2 Synthesis of [Copper Clusters@FeBTC]@rGO Catalyst for Highly Efficient Hydrogenation of CO2 to Methanol

  • Kubovics, Márta
  • Borrás, Alejandro
  • Markeb, Ahmad Abo
  • Marbán Calzón, Gregorio
  • Moral Vico, Javier
  • Sánchez, Antoni
  • López Periago, Ana M.
  • Domingo Pascual, M. Concepción
In the vast majority of studies, methanol production via CO2 hydrogenation is realized using bifunctional catalysts, commonly CuZnO phases. The basic motivation of this study is to confront main concerns regarding typical copper-based catalysts, which are the aggregation of the active metal nanoparticles (NPs) and its concomitant deactivation. For this, an extensive research on composites of mesoporous iron trimesate metal-organic frameworks (MOFs) [crystalline MIL-100(Fe) and semiamorphous FeBTC], loaded with copper clusters (CuCs) into the pores, is performed, because it is a pioneer in the area. The growth and aggregation of CuCs are hindered by the confinement of the active entities into the MOF mesocages. From the two studied MOFs, only the copper loaded semiamorphous FeBTC behaves as a catalyst. To further enhance the catalytic activity, CuCs@FeBTC NPs are dispersed on the plates constituting a reduced graphene-oxide aerogel. Main steps in the preparation of these complex catalysts involve the use of sustainable technology based on supercritical CO2, used either as a solvent or drying agent. The reduction strategy designed to obtain the active catalyst (Cu2+ to Cu+/Cu0 in CuCs) was crucial to upgrade the end product performance. A double reduction route, applying ascorbic acid preceding thermal H2 reduction, turns out to be necessary to attain a significant catalytic activity of the confined Cu2+ species. The as-synthesized and spent catalysts were analyzed in regard of the structure (X-ray diffraction, infrared), bulk (mass spectrometry) and surface (X-ray photoelectron spectroscopy) composition, morphology (microscopy and energy dispersive spectroscopy) and textural properties (N2 physisorption). The catalytic performance of reduced CuCs@FeBTC and [CuCs@FeBTC]@rGO composites was tested in the CO2 hydrogenation reaction at 10 bar. Methane and methanol were obtained as valuable reaction products. When using the [CuCs@FeBTC]@rGO aerogel, methanol yield was noticeably high, in comparison to reported data, in the order of 86 mgMeOHgCu-1 h-1; while the amount of side products (methane, CO) was almost totally hindered up to 260 °C., This work was supported by the Spanish Ministry of Science and Innovation through the Severo Ochoa Program for Centers of Excellence (CEX2019-000917-S), the Spanish National Plan of Research with project PID2020-115631GB-I00 and Ecological Transition and Digital Transition Projects TED2021-1298378-C41 and TED2021-130407B-I00. A.M.L., C.D. and M.K. acknowledge the financial support of the CSIC platform SusPlast 20219PT059. G.M.́M. acknowledges the financial support provided by Principado de Asturias (IDI/2021/000096). A. A. Markeb is the recipient of a postdoctoral fellowship from the Spanish Ministerio de Universidades, María Zambrano ID 715364., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Adsorptive removal of siloxanes from biogas, recent advances in catalyst reusability and water content effect

  • Vali, Seyed Alireza|||0000-0002-0124-9321
  • Moral-Vico, Javier|||0000-0002-6795-3450
  • Font, Xavier|||0000-0003-4981-7436
  • Sánchez, Antoni|||0000-0003-4254-8528
The valorization of biogas as a renewable energy source faces a major obstacle regarding its purification. Siloxane is one of the impurities that cause problems such as damages to equipment of combustion engines, turbines, and boilers used for biogas conversion to heat and electricity. In this review, adsorption for siloxane removal is widely discussed, with two specific approaches: adsorbents sensitivity to water and regeneration, two essential points for industrial application. Thus, determining factors in adsorbents capacity, reusability, and water tolerance including textural properties, surface functional groups, and hydrophobicity are deeply analyzed. Studies oriented to the optimization of traditional adsorbents such as activated carbon, silica gel, and aluminosilicates as well as newly emerging adsorbents such as metal organic frameworks, graphene oxides, and waste-derived materials are studied in detail in terms of reusability and water tolerance. Although activated carbon is commercially used, its low selectivity, pore blockage due to siloxane polymerization, and unsuccessful regeneration make it disadvantageous. Silica gel, however, shows better reusability as a result of less adsorbent-adsorbate dissociation energy. In addition, aluminosilicates, despite its low adsorption capacity, proved to be more practical for real biogas due to their high hydrophobicity. Graphene oxide cost and energy efficiency in their synthesis make them more industrially appealing candidates despite their low adsorption capacity. Finally, metal organic frameworks demonstrated high selectivity, high adsorption capacity, and more efficient regeneration and therefore have more advantages and less drawbacks, although the number of published studies is still limited.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Recent Advances in the Catalytic Conversion of Methane to Methanol, From the Challenges of Traditional Catalysts to the Use of Nanomaterials and Metal-Organic Frameworks

  • Vali, Seyed Alireza|||0000-0002-0124-9321
  • Abo Markeb, Ahmad|||0000-0003-4385-0198
  • Moral-Vico, Javier|||0000-0002-6795-3450
  • Font, Xavier|||0000-0003-4981-7436
  • Sánchez, Antoni|||0000-0003-4254-8528
Methane and carbon dioxide are the main contributors to global warming, with the methane effect being 25 times more powerful than carbon dioxide. Although the sources of methane are diverse, it is a very volatile and explosive gas. One way to store the energy content of methane is through its conversion to methanol. Methanol is a liquid under ambient conditions, easy to transport, and, apart from its use as an energy source, it is a chemical platform that can serve as a starting material for the production of various higher-value products. Accordingly, the transformation of methane to methanol has been extensively studied in the literature, using traditional catalysts as different types of zeolites. However, in the last few years, a new generation of catalysts has emerged to carry out this transformation with higher conversion and selectivity, and more importantly, under mild temperature and pressure conditions. These new catalysts typically involve the use of a highly porous supporting material such as zeolite, or more recently, metal-organic frameworks (MOFs) and graphene, and metallic nanoparticles or a combination of different types of nanoparticles that are the core of the catalytic process. In this review, recent advances in the porous supports for nanoparticles used for methane oxidation to methanol under mild conditions are discussed.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Synthesis of Cobalt-Based Nanoparticles as Catalysts for Methanol Synthesis from CO2 Hydrogenation

  • Carrasco García, Anna|||0000-0001-6215-5364
  • Vali, Seyed Alireza|||0000-0002-0124-9321
  • Ben-Abbou, Zahra
  • Moral-Vico, Javier|||0000-0002-6795-3450
  • Abo Markeb, Ahmad|||0000-0003-4385-0198
  • Sánchez, Antoni|||0000-0003-4254-8528
The increasing emission of carbon dioxide into the atmosphere has urged the scientific community to investigate alternatives to alleviate such emissions, being that they are the principal contributor to the greenhouse gas effect. One major alternative is carbon capture and utilization (CCU) toward the production of value-added chemicals using diverse technologies. This work aims at the study of the catalytic potential of different cobalt-derived nanoparticles for methanol synthesis from carbon dioxide hydrogenation. Thanks to its abundance and cost efficacy, cobalt can serve as an economical catalyst compared to noble metal-based catalysts. In this work, we present a systematic comparison among different cobalt and cobalt oxide nanocomposites in terms of their efficiency as catalysts for carbon dioxide hydrogenation to methanol as well as how different supports, zeolites, MnO, and CeO, can enhance their catalytic capacity. The oxygen vacancies in the cerium oxide act as carbon dioxide adsorption and activation sites, which facilitates a higher methanol production yield.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Cu/ZnO/CeO2 Supported on MOF-5 as a Novel Catalyst for the CO2 Hydrogenation to Methanol, A Mechanistic Study on the Effect of CeO2 and MOF-5 on Active Sites

  • Vali, Seyed Alireza|||0000-0002-0124-9321
  • Moral-Vico, Javier|||0000-0002-6795-3450
  • Font, Xavier|||0000-0003-4981-7436
  • Sánchez, Antoni|||0000-0003-4254-8528
Cu/ZnO/CeO nanocomposite was supported on metal organic framework (MOF-5) to enhance active sites dispersion and control the nanoparticles agglomeration during synthesis through strong metal-support interactions. The incorporation of MOF-5 alleviated the obstacle facing the commercial ternary Cu/ZnO/AlO regarding low surface area due to nanoparticles agglomeration. In addition, Cu/ZnO/CeO@MOF-5 gave higher methanol selectivity than the commercial catalyst which can be accounted for by the interfacial sites generated between MOF-5 and Cu/ZnO which favour methanol synthesis over carbon monoxide through regulating the intermediates bonding energies. CeO as support for Cu/ZnO nanoparticles was also compared with commercial support and showed to have led to smaller particle size and superior dispersion of Cu active sites as well. Cu/ZnO/CeO@MOF-5 resulted in methanol STY of 23.3 mg g h and selectivity of 79% at mild reaction temperature (260 °C) and pressure (10 bar). Two different MOFs including cerium based MOF and ZIF-8 demonstrated inferior performance compared to MOF-5.