Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

A Chromatic Nanoswitcher for Thermal Monitoring of Cell Metabolism

  • Zhang, Fengchan|||0000-0003-0751-1009
  • París Ogáyar, Marina|||0000-0002-4816-7729
  • Artiga, Álvaro|||0000-0001-9475-6367
  • Hernando, Jordi|||0000-0002-1126-4138
  • Villar-Alvarez, Eva|||0000-0003-4023-1375
  • Lorenzo Rivera, Julia|||0000-0001-5659-6008
  • Salegi Ansa, Beñat|||0000-0001-5054-758X
  • Cogliati, Sara|||0000-0002-0374-3489
  • Formentini, Laura|||0000-0001-5641-821X
  • Haro-González, Patricia|||0000-0002-1568-3794
  • Ruiz-Molina, Daniel|||0000-0002-6844-8421
  • Otaegui, Jaume Ramon|||0000-0002-9596-8625
  • Roscini, Claudio|||0000-0002-0157-8934
  • Jaque, Daniel|||0000-0002-3225-0667
Accurate sensing of intracellular temperature is crucial for understanding and monitoring cell metabolism, serving as an initial step toward diagnosing conditions such as mitochondria-related diseases. However, thermal monitoring of cell metabolism is challenging due to the minimal temperature variations caused by intracellular metabolic activity (typically ≈1 °C) and by the risk of crosstalk in intracellular sensors. A novel type of intracellular thermal sensor is presented, based on silica nanocapsules filled with a thermo-responsive fluorescent medium. This medium undergoes a reversible phase transition from solid to liquid at temperatures ≈37 °C, inducing a chromatic switch that facilitates remote thermal sensing. The chromatic switchers exhibit a thermal sensitivity of ≈13% °C⁻¹ at 37 °C, one of the highest reported for intracellular thermal sensing. Notably, the thermal response is unaffected by external factors such as pH, ionic strength, and viscosity. Moreover, it is confirmed that the response of the sensors is not affected by the cellular activity, underscoring their reliability for cytoplasmic temperature measurements. The potential of these sensors is demonstrated by measuring intracellular heating during the metabolic switch from mitochondrial to glycolytic activity, showcasing their potential for real-time, precise thermal monitoring (<1 °C) of cell metabolism.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Surface characterization of alkane viral anchoring films prepared by titanate-assisted organosilanization

  • Sanz Calderón, Aida
  • Cantero, Miguel
  • Pérez, Uxia
  • Ortega-González, Paula
  • Martin, Carmen
  • Pablo, Pedro J. de
  • Manso Silván, Miguel
  • Hernando-Pérez, Mercedes
8 pags., 5 figs., Studies of virus adsorption on surfaces with optimized properties have attracted a lot of interest, mainly due to the influence of the surface in the retention, orientation and stability of the viral capsids. Besides, viruses in whole or in parts can be used as cages or vectors in different areas, such as biomedicine and materials science. A key requirement for virus nanocage application is their physical properties, i.e. their mechanical response and the distribution of surface charge, which determine virus-substrate interactions and stability. In the present work we show two examples of viruses exhibiting strong surface interactions on homogeneous hydrophobic surfaces. The surfaces were prepared by titanate assisted organosilanization, a sol-gel spin coating process, followed by a mild annealing step. We show by surface and interface spectroscopies that the process allows trapping triethoxy-octylsilane (OCTS) molecules, exhibiting a hydrophobic alkane rich surface finishing. Furthermore, the surfaces remain flat and behave as more efficient sorptive surfaces for virus particles than mica or graphite (HOPG). Also, we determine by atomic force microscopy (AFM) the mechanical properties of two types of viruses (human adenovirus and reovirus) and compare the results obtained on the OCTS functionalized surfaces with those obtained on mica and HOPG. Finally, the TIPT+OCTS surfaces were validated as platforms for the morphological and mechanical characterization of virus particles by using adenovirus as initial model and using HOPG and mica as standard control surfaces. Then, the same characteristics were determined on reovirus using TIPT+OCTS and HOPG, as an original contribution to the catalogue of physical properties of viral particles., This work was supported by the grant Ayudas a Proyectos de I+D para Jóvenes Doctores de la Universidad Autónoma de Madrid 2021 (SI3/PJI/2021–00216) supported by Comunidad de Madrid and Universidad Autónoma de Madrid to M.H-P. Also, M.H-P acknowledges funding from the Spanish Ministry of Science and Innovation (TED2021–129937B-I00). Grant PID2019–104098GB-I00/AEI/10.13039/501100011033, co-funded by the Spanish State Research Agency and the European Regional Development Fund to C.S.M. The CNB-CSIC was further supported by a Spanish State Research Agency Severo Ochoa Excellence grant (SEV 2017–0712). C.S.M is a member of the CSIC funded consortium LifeHub (CSIC grant number: 202120E47). REACT-EU funding by Comunidad Autónoma de Madrid is also acknowledged. M.M.S acknowledges funding from MCIN/AEI /10.13039/501100011033 (PID2020–112770RB-C22). P.J.P acknowledges projects FIS2017–89549-R; and FIS2017–90701-REDT. P.J.P also acknowledges the Human Frontiers Science Program (HFSPO RGP0012/2018)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

All-Optical Domain Inversion in LiNbO3 Crystals by Visible Continuous-Wave Laser Irradiation

  • Sebastián-Vicente, Carlos
  • Imbrock, Jörg
  • Laubrock, Simon
  • Caballero-Calero, Olga
  • García-Cabañes, Ángel
  • Carrascosa, Mercedes
LiNbO3 is a distinguished multifunctional material where ferroelectric domain engineering is of paramount importance. This degree of freedom of the spontaneous polarization remarkably enhances the applicability of LiNbO3, for instance, in photonics. In this work, we report the first method for all-optical domain inversion of LiNbO3 crystals using continuous-wave visible light. While we focus mainly on iron-doped LiNbO3, the applicability of the method is also showcased in undoped congruent LiNbO3. The technique is simple, cheap, and readily accessible. It relies on ubiquitous elements: a light source with low/moderate intensity, basic optics, and a conductive surrounding medium, e.g., water. Light-induced domain inversion is unequivocally demonstrated and characterized by combination of several experimental techniques: selective chemical etching, surface topography profilometry, pyroelectric trapping of charged microparticles, scanning electron microscopy, and 3D Čerenkov microscopy. The influence of light intensity, exposure time, laser spot size, and surrounding medium is thoroughly studied. To explain all-optical domain inversion, we propose a novel physical mechanism based on an anomalous interplay between the bulk photovoltaic effect and external electrostatic screening. Overall, our all-optical method offers straightforward implementation of LiNbO3 ferroelectric domain engineering, potentially sparking new research endeavors aimed at novel optoelectronic applications of photovoltaic LiNbO3 platforms., Financial support for this research project is gratefullyacknowledged: grant PID2020-116192RB-I00 by MCIN/AEI/10.13039/501100011033 and grant TED2021-129937B−I00by MCIN/AEI/10.13039/501100011033 and EU (FEDER,FSE). C.S.-V. also thanks financial support through his FPUcontract (FPU19/03940) and his grant for a research stay inMü nster (EST23/00644). Also, the authors acknowledge theservice from the MiNa Laboratory at IMN, and funding fromCM (project S2018/NMT-4291 TEC2SPACE), MINECO(project CSIC13-4E-1794), and EU (FEDER, FSE). Likewise,the authors express their gratitude to Fernando Moreno forkindly conducting the surface profilometry measurements, Peer reviewed