Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 13
Encontrada(s) 1 página(s)

RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Selection of sEMG-based Configuration for a Hand Gesture Recognition System

  • Vázquez Araújo, Francisco Javier
  • Dapena, Adriana
  • Laport, Francisco
  • Castro-Castro, Paula-María
  • Iglesia, Daniel I.
[Abstract]: In recent decades, extensive research has been conducted on the analysis of Electromyography (EMG) signals, aiming to establish a novel communication pathway that utilizes the electrical activity generated by muscle contractions to control external devices. However, determining the optimal configuration for such systems in a given scenario remains as a challenging task. The challenges arise from two main factors: the growing number of available feature extraction methods and classification algorithms, and the necessity of designing control systems that prioritize user comfort, with considerations such as a reduced number of electrodes and fast reaction times. In this paper we propose a method to determine the most suitable configuration for an EMG system by considering three crucial parameters in control systems: reaction time, accuracy, and the required number of channels., Xunta de Galicia (grants ED431C 2020/15 and ED481B 2022/012), MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR (grant TED2021-130240B-I00 (IVRY)). CITIC, as a center accredited for excellence within the Galician University System and a member of the CIGUS Network, receives subsidies from the Department of Education, Science, Universities, and Vocational Training of the Xunta de Galicia. Additionally, it is co-financed by the EU through the FEDER Galicia 2021-27 operational program (Ref. ED431G 2023/01)., Xunta de Galicia; ED431C 2020/15, Xunta de Galicia; ED481B 2022/012, Xunta de Galicia; ED431G 2023/01
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

An IoT system for a smart campus: Challenges and solutions illustrated over several real-world use cases

  • Domínguez-Bolaño, Tomás
  • Barral Vales, Valentín
  • Escudero, Carlos J.
  • García-Naya, José A.
[Abstract]: This article discusses the development of an IoT system for monitoring and controlling various devices and systems from different vendors. The authors considered key challenges in IoT projects, such as interoperability and integration, scalability, and data storage, processing, and visualization, during the design and deployment phases. In addition to these general challenges, the authors also delve into the specific integration challenges they encountered. Various devices and systems were integrated into the system and five real-world scenarios in a university campus environment are used to illustrate the challenges encountered. The scenarios involve monitoring various aspects of a university campus environment, including air quality, environmental parameters, energy efficiency, solar photovoltaic energy, and energy consumption. The authors analyzed data and CPU usage to ensure that the system could handle the large amount of data generated by the devices. The platform developed uses open source projects such as Home Assistant, InfluxDB, Grafana, and Node-RED. All developments have been published as open source in public repositories. In conclusion, this work highlights the potential and feasibility of IoT systems in various real-world applications, the importance of considering key challenges in IoT projects during the design and deployment phases, and the specific integration challenges that may be encountered., This work was supported in part by grants PID2022-137099NB-C42 (MADDIE) and TED2021-130240B-I00 (IVRY) funded by MCIN/AEI/10.13039/501100011033; and in part by the European Union NextGenerationEU/PRTR. Funding for open access charge: Universidade da Coruña/CISUG., Financiado para publicación en acceso aberto: Universidade da Coruña/CISUG
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Reinforcement and Homework Control for Children with ASD using a Mobile Application for Apple Watch

  • Vila Muñoz, Noé
  • Castro-Castro, Paula-María
  • Dapena, Adriana
Cursos e Congresos, C-155, [Abstract] The article shows the design and development of a pair of mobile applications for Apple Watch and iPhone devices to reinforce and control tasks for children with autism disorders. This work takes advantage of the possibilities of smartwatches, such as internet connectivity, access to biometric sensors and ease of communication with users, to improve their autonomy in carrying out everyday routines. The application has been designed taking into account the needs and characteristics of this group, collaborating with two non-profit organisations in the area of AI, Xunta de Galicia; ED431C 2020/15, This work has been supported by grant ED431C 2020/15 funded by Xunta de Galicia and ERDF Galicia 2014-2020; by grant PID2019-104958RB-C42 (ADELE) funded by MCIN/AEI/10.13039/501100011033; and by project TED2021-130240B-I00 (IVRY) funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Action Research in Computer Engineering Education: Enhancing Expository Lessons Through Peer Instruction

  • Fresnedo, Óscar
  • Dapena, Adriana
  • Laport, Francisco
  • Castro-Castro, Paula-María
This is an ACCEPTED VERSION of the following published document: Fresnedo, Ó., Dapena, A., Laport, F., & Castro, P. M. (2025). Action Research in Computer Engineering Education: Enhancing Expository Lessons Through Peer Instruction. International Journal of Engineering Education, 41(4), 1018-1029. https://www.ijee.ie/contents/c410425.html, [Abstract]: This paper examines the effect of peer instruction in higher education by implementing an action research study. The paper discusses the key aspects of an instructional methodology designed to achieve four educational objectives: (1) to make theoretical lessons more interactive, engaging students in their own learning process in a more active manner; (2) to enhance the understanding of abstract and complex concepts; (3) to foster students’ abilities to argue and develop critical thinking; and (4) to enable professors to identify areas where students face the greatest difficulties. The study involved students from a Computer Engineering degree course. The evaluation focused on both academic results and student perceptions in comparison with a traditional teaching methodology. Overall, academics evaluation metrics improved, and the participants in the research showed a positive perception and attitude towards the use of peer instruction as a learning tool in the classroom and considered it a viable alternative for knowledge sharing., This work has been supported by grant ED431C 2024/18 funded by Xunta de Galicia; by grant PID2022-137099NB-C42 (MADDIE) funded by MCIN/AEI/ 10.13039/501100011033; and by project TED2021-130240B-I00 (IVRY) funded by MCIN/AEI/10.13039/501100011033 and the European Union NextGenerationEU/PRTR., Xunta de Galicia; ED431C 2024/18, https://hdl.handle.net/2183/45613 (preprint)
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Direct Antenna Multi-Modulation with Time-Modulated Arrays

  • Maneiro-Catoira, Roberto
  • Brégains, Julio
  • García-Naya, José A.
  • Castedo, Luis
Presented at: 2024 IEEE International Symposium on Antennas and Propagation and INC/USNC‐URSI Radio Science Meeting (AP-S/INC-USNC-URSI), 14-19 July 2024, Firenze, Italy © 2024 IEEE. This version of the article has been accepted for publication, after peer review. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works. The Version of Record is available online at: https://doi.org/10.1109/AP-S/INC-USNC-URSI52054.2024.10687227, [Abstract]: We present a novel approach to Direct Antenna Multi-Modulation (DAMM) leveraging Time-Modulated Array (TMA) technology, employing a simplified and cost-effective feeding network equipped with 2-bit phase shifters and digitally controlled Variable Gain Amplifiers (VGAs). This technique enables direct implementation of FSK, PSK and QAM modu-lation schemes within the antenna by utilizing periodic linear-phase time-modulating waveforms. Furthermore, in contrast to conventional phased arrays equipped with high-resolution Variable Phase Shifters (VPSs), but still subject to quantized phases, the TMA can deliver Beam Steering (BS) with virtually continuous angular resolution., This work has been supported by grant PID2022-137099NBC42 (MADDIE) funded by MCIN/AEI/10.13039/501100011033; and by project TED2021-130240B-I00 (IVRY) funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR.
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Eye State Detection Using Frequency Features from 1 or 2-Channel EEG

  • Laport, Francisco
  • Dapena, Adriana
  • Castro-Castro, Paula-María
  • Iglesia, Daniel I.
  • Vázquez Araújo, Francisco Javier
© The Author(s) This is an Open Access article published by World Scientific Publishing Company. It is distributed under the terms of the Creative Commons Attribution 4.0 (CC BY) License which permits use, distribution and reproduction in any medium, provided the original work is properly cited., [Abstract]: Brain–computer interfaces (BCIs) establish a direct communication channel between the human brain and external devices. Among various methods, electroencephalography (EEG) stands out as the most popular choice for BCI design due to its non-invasiveness, ease of use, and cost-effectiveness. This paper aims to present and compare the accuracy and robustness of an EEG system employing one or two channels. We present both hardware and algorithms for the detection of open and closed eyes. Firstly, we utilize a low-cost hardware device to capture EEG activity from one or two channels. Next, we apply the discrete Fourier transform to analyze the signals in the frequency domain, extracting features from each channel. For classification, we test various well-known techniques, including Linear Discriminant Analysis (LDA), Support Vector Machine (SVM), Decision Tree (DT), or Logistic Regression (LR). To evaluate the system, we conduct experiments, acquiring signals associated with open and closed eyes, and compare the performance between one and two channels. The results demonstrate that employing a system with two channels and using SVM, DT, or LR classifiers enhances robustness compared to a single-channel setup and allows us to achieve an accuracy percentage greater than 95% for both eye states., This work has been supported by Grant No. ED431C 2020/15 funded by Xunta de Galicia and ERDF Galicia 2014–2020; by Grant No. PID2019-104958RB-C42 (ADELE) funded by MCIN/AEI/10.13039/501100 011033; and by project TED2021-130240B-I00 (IVRY) funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGeneration EU/PRTR and by the postdoctoral Grant No. ED481B 2022/012 funded by Xunta de Galicia., Xunta de Galicia; ED431C 2020/15, Xunta de Galicia; ED481B 2022/012
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Direct Antenna Frequency-Hopped M-FSK Modulation With Time-Modulated Arrays

  • Maneiro-Catoira, Roberto
  • Brégains, Julio
  • García-Naya, José A.
  • Castedo, Luis
Financiado para publicación en acceso aberto: Universidade da Coruña/CISUG, [Abstract]: We present an innovative approach that simultaneously enables direct antenna frequency-hopped M-ary frequency shift keying (DAFH-MFSK) modulation and beamsteering through the use of time-modulated arrays (TMAs). The distinctive feature of our approach lies in the modulation of the TMA excitations with binary periodic sequences, which can be easily frequency-adjusted and time-delayed to simultaneously allow for DAFH-MFSK direct antenna modulation and beamsteering. Notably, our TMA proposal offers a distinct advantage over conventional architectures in terms of performance metrics, including reduced insertion losses and enhanced phase resolution for beamsteering, while also simplifying hardware complexity., This work was supported in part by Grant ED431C 2020/15 funded by Xunta de Galicia and ERDF Galicia 2014-2020; in part by Grant PID2022- 137099NB-C42 (MADDIE) and Grant TED2021-130240B-I00 (IVRY) funded by MCIN/AEI/10.13039/501100011033; in part by the European Union NextGenerationEU/PRTR; and funding for open access charge: Universidade da Coruña/CISUG. (Corresponding author: José A. García-Naya.), Xunta de Galicia; ED431C 2020/15
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Joint Beam Steering and Direct Antenna Multimodulation Using Time-Modulated Arrays

  • Maneiro-Catoira, Roberto
  • Bogdan, Grzegorz
  • Godziszewski, Konrad
  • Brégains, Julio
  • García-Naya, José A.
  • Yashchyshyn, Yevhen
  • Castedo, Luis
Financiado para publicación en acceso aberto: Universidade da Coruña/CISUG, [Abstract]: In this article, we introduce a novel architecture-independent technique for time-modulated arrays (TMAs) that enables simultaneous direct-antenna multimodulation (DAMM) and beam steering. We validated the approach across a remarkably broad variety of modulation constellations, confirming its ability to implement arbitrary direct-antenna IQ modulation. This flexibility makes the technique highly suitable for Internet of Things (IoT) applications spanning scenarios that demand either robust communication or high-spectral efficiency, all on a single energy-efficient, low-cost hardware platform. The proposed method operates within the available TMA bandwidth and achieves precise beam steering without relying on computationally intensive optimization algorithms. Unlike previous studies that evaluate TMAs in isolation, we design and characterize a fully integrated transmitter that combines DAMM and beam steering functionalities. The resulting TMA-based DAMM transmitter employs a reduced hardware architecture, delivering both cost and energy savings ideally matched to resource-constrained, low-latency IoT deployments., This work was supported in part by the Xunta de Galicia under Grant ED431C 2024/18; in part by MCIN/AEI/10.13039/501100011033 under Grant PID2022-137099NB-C42 (MADDIE); in part by MCIN/AEI/10.13039/501100011033 and the European Union NextGenerationEU/PRTR under Project TED2021-130240B-I00 (IVRY); and in part by the Open Access Charge: Universidade da Coruña/CISUG., Xunta de Galicia; ED431C 2024/18
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

An IoT System for Smart Building Combining Multiple mmWave FMCW Radars Applied to People Counting

  • Barral Vales, Valentín
  • Domínguez-Bolaño, Tomás
  • Escudero, Carlos J.
  • García-Naya, José A.
Complemented by the Dataset "An IoT System for Smart Building Combining Multiple mmWave FMCW Radars Applied to People Counting" - DOI: https://doi.org/10.5281/zenodo.10572014, [Abstract]: In contemporary society, the pressing challenge of preserving user privacy clashes with the imperative for smart buildings to efficiently manage their resources, particularly in the context of occupancy monitoring for optimized energy utilization. This article delves into the application of millimiter wave (mmWave) frequency modulated continuous wave (FMCW) radar technology for occupancy monitoring. mmWave FMCW radar, unlike conventional methods that often require the use of identifiable tags or involve image analysis, operates without the need for such identifiers, mitigating privacy concerns. However, challenges arise when attempting to cover extensive indoor spaces due to the limited range of individual mmWave FMCW radar devices. The present work proposes the use of a flexible software architecture to integrate the measurements of several mmWave FMCW radar devices, so that the whole behaves as a single sensor. To validate the proposal, an example of use in a real environment in an indoor space monitored with three mmWave FMCW radar devices is also presented. The example details the whole process, from the physical installation of the devices to the use of the different software modules that allow the integration of the data into a common Internet of Things (IoT) management platform, such as Home Assistant. All the elements, from the measurements captured during the test to the different software implementations, are shared publicly with the scientific community., This work was supported in part by MCIN/AEI/10.13039/501100011033 under Grant PID2022-137099NB- C42 (MADDIE) and Grant TED2021-130240B-I00 (IVRY); in part by the European Union NextGenerationEU/PRTR; and in part by the Open Access Charge: Universidade da Coruña/CISUG., Financiado para publicación en acceso aberto: Universidade da Coruña/CISUG
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Reproducibility and Replicability in Neuroimaging: Constrained IVA as an Effective Assessment Tool

  • Laport, Francisco
  • Dapena, Adriana
  • Vu, Trung
  • Yang, Hanlu
  • Calhoun, Vince
  • Adali, Tülay
The congress was held in Lyon, France, 26 - 30 August 2024, [Abstract]: Matrix decomposition techniques have been successfully applied in the analysis of multi-subject functional magnetic resonance imaging (fMRI) data. These data-driven approaches that assume the linear blind source separation (BSS) problem can yield an unsupervised and fully interpretable solution when there is a good model match. However, selecting a suitable model order that provides an accurate model match is an important challenge. Replicability and computational reproducibility are two key aspects that are also intimately related to interpretability. Despite clear evidence that solutions with poor reproducibility can lead to suboptimal results, the evaluation of reproducibility in matrix decomposition techniques remains limited in the existing literature. We propose the use of constrained independent vector analysis (cIVA), a state-of-the-art joint BSS technique, to assess the influence of model order selection for replicability and reproducibility. We demonstrate the attractiveness of cIVA for replicability by alleviating permutation ambiguity as well as enabling additional quantification opportunities. Our results show that highly reproducible model orders achieve a good model match with highly interpretable and replicable solutions when cIVA is applied to four different resting-state fMRI datasets., This work is supported in part by the grants NSF 2316420, NIH R01MH118695, NIH R01MH123610, NIH R01AG073949, Xunta de Galicia (grants ED431C 2020/15 and ED481B 2022/012), MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR (grant TED2021-130240B-I00 (IVRY)), United States. National Science Foundation; 2316420, United States. National Institutes of Health; R01MH118695, United States. National Institutes of Health; R01MH123610, United States. National Institutes of Health; R01AG073949
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Lattice-Based Analog Mappings for Low-Latency Wireless Sensor Networks

  • Suárez-Casal, Pedro
  • Fresnedo, Óscar
  • Pérez-Adán, Darian
  • Castedo, Luis
© 2023 IEEE. This version of the article has been accepted for publication, after peer review. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works. The Version of Record is available online at: https://doi.org/10.1109/JIOT.2023.3273194., [Abstract]: We consider the transmission of spatially correlated analog information in a wireless sensor network (WSN) through fading single-input and multiple-output (SIMO) multiple access channels (MACs) with low-latency requirements. A lattice-based analog joint source-channel coding (JSCC) approach is considered where vectors of consecutive source symbols are encoded at each sensor using an n -dimensional lattice and then transmitted to a multiantenna central node. We derive a minimum mean square error (MMSE) decoder that accounts for both the multidimensional structure of the encoding lattices and the spatial correlation. In addition, a sphere decoder is considered to simplify the required searches over the multidimensional lattices. Different lattice-based mappings are approached and the impact of their size and density on performance and latency is analyzed. Results show that, while meeting low-latency constraints, lattice-based analog JSCC provides performance gains and higher reliability with respect to the state-of-the-art JSCC schemes., This work was supported in part by the Xunta de Galicia under Grant ED431C 2020/15, and in part by MCIN/AEI/10.13039/501100011033 and the European Union NextGenerationEU/PRTR under Grant PID2019-104958RB-C42 (ADELE), Grant TED2021-130240B-I00 (IVRY), and Grant BES-2017-081955. CITIC is funded by Xunta de Galicia through the collaboration agreement between the Consellería de Cultura, Educación, Formación Profesional e Universidades, and the Galician universities for the strengthening of the research centers of the Galician University System (CIGUS)., Xunta de Galicia; ED431C 2020/15
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Directional Modulation With Artificial-Noise Injection Into Time-Modulated Arrays

  • Maneiro-Catoira, Roberto
  • Brégains, Julio
  • García-Naya, José A.
  • Castedo, Luis
[Abstract]: We propose a novel approach to directional modulation (DM) in time-modulated arrays (TMAs) that simultaneously radiates the information signal over a sum pattern and artificial noise over a difference pattern. Unlike other DM-TMA solutions, our technique achieves high-performance DM without the need for time-consuming optimization algorithms, preserving TMA efficiency. This versatility makes it suitable for high-mobility, low-latency applications., This work was supported in part by the MCIN/AEI/10.13039/501100011033 under Grant PID2022-137099NB-C42 (MADDIE) and Grant TED2021-130240B-I00 (IVRY); in part by the European Union NextGenerationEU/PRTR; and in part by the Universidade da Coruña/CISUG for open access charge., Financiado para publicación en acceso aberto: Universidade da Coruña/CISUG
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Multicamera Edge-Computing System for Persons Indoor Location and Tracking

  • Carro Lagoa, Ángel
  • Barral Vales, Valentín
  • González-López, Miguel
  • Escudero, Carlos J.
  • Castedo, Luis
[Abstract]: This paper presents an indoor person localization and tracking system that uses multiple smart cameras equipped with artificial intelligence (AI) accelerators serving as edge-computing nodes. Our main contributions are as follows: (a) the development of a new multicamera tracking system for indoor scenarios; (b) the release of a multitarget multicamera tracking dataset; and (c) the development of an annotation mechanism based on waypoints. The system can simultaneously track several individuals while preserving their privacy and anonymity, because no images or sensitive data are transmitted outside the edge nodes. Only the position and appearance of each person were transmitted to the central server. In addition, a multitarget multicamera tracking dataset was released. The dataset contains recordings from five cameras in an indoor scenario and is annotated with the real-world coordinates of individuals. Ground-truth annotations were semiautomatically generated using a mechanism in which people equipped with mobile phones followed specific paths with predefined waypoints. Software related to the ground-truth annotation mechanism has also been released as open source., This work has been supported in part by grant ED431C 2020/15 funded by Xunta de Galicia and by grant TED2021-130240B-I00 (IVRY) funded by MCIN/AEI/ 10.13039/501100011033 and by the European Union NextGenerationEU/PRTR . Funding for open access charge: Universidade da Coruña/CISUG., Xunta de Galicia; ED431C 2020/15