Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

3D-printed palladium/activated carbon-based catalysts for the dehydrogenation of formic acid as hydrogen carrier

  • Díaz-Herrezuelo, Irene
  • Vega, Gonzalo
  • Navarro, Marina
  • Miranzo López, Pilar
  • Osendi, María Isabel
  • Casas, José A.
  • Quintanilla, Asunción
  • Belmonte, Manuel
[EN] The development of structured catalyst supports to promote the chemical process intensification is of great interest, and porous activated carbon (AC) is an excellent material to tackle this challenge. In addition, the current increasing hydrogen demand and its limitations in transportation and storage require of novel approaches. Here, highly porous and robust 3D printed patterned AC-based architectures have been additive manufactured by using a direct ink writing technology. Different AC inks containing a boehmite gel with no organic additions have been rheologically characterized to select the most suitable ink for building AC supports, which have been thermally treated to promote solid-solid contacts and increase the robustness (strength of ~0.5 MPa) while keeping high porosity (86%). The AC supports have been then impregnated with a 5 wt.% of palladium (Pd) precursor to develop a 3D Pd/AC catalyst able to generate hydrogen from the dehydrogenation of formic acid (FA), a very promising liquid organic hydrogen carrier, in a fixed-bed reactor. These 3D catalysts have produced CO-free hydrogen from FA under ambient conditions with a FA conversion of 81% and a hydrogen flow rate of 6 mL·min-1. Long-term experiments in continuous mode operation have evidenced a good catalytic stability and recyclability. These results demonstrate that 3D Pd/AC catalysts exhibit a great potential to develop a new technology for using FA as hydrogen carrier., This work was supported by the Grants PID2021-125427OB-I00 and TED2021-130312B-I00 funded by MICIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”, and by the Grant EIN2020-112153 funded by MCIN/AEI/10.13039/501100011033 and by “European Union NextGenerationEU/PRTR”. G. Vega acknowledges the Universidad Autónoma de Madrid for the Predoctoral contract. M. Navarro acknowledges the Community of Madrid for her contract under the “Programa Investigo”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

3D printed catalytic stirrers with permeable blades made of porous carbon

  • Llamas Unzueta, Raúl
  • Reguera-García, Alejandro
  • Sanz, Isabel
  • Martin, Celia
  • Quintanilla, Asuncion
  • Menéndez Díaz, José Ángel
  • Montes Morán, Miguel Ángel
This work introduces a new type of catalytic stirrer made entirely of porous carbon. These stirrers are made by printing 3D structures directly from whey pastes that were subsequently carbonised to produce impellers with meshed surfaces made of porous carbon with up to a 3 % N content. The characteristics of the carbon pieces include a high porosity of approximately 70 %, mainly in the macropore range, although there is also some development of mesoporosity and microporosity obtained by a simple washing process with HCl (SBET = 400 m2/g). The blades are strong (mechanical strength of 165 Pa) and able to sustain high stirring speeds (2000 rpm) immersed in highly viscous fluids without damage. The blade design of the stirrer is optimised to provide effective mixing, and to facilitate fluid circulation through the blades, as demonstrated experimentally and by CFD simulation. All these characteristics are expected to enhance the contact between the catalyst and the reactants and/or favour the deposition of selected catalysts on their surfaces., The authors acknowledge the financial support received from the Ministerio de Ciencia e Innovación (MCIN/AEI/10.13039/501100011033, Project PID2020–115334GB-I00, Project TED2021–130312B-I00) and Principado de Asturias (FICYT)-European Union (FEDER) (Project PCTI-Asturias IDI/2021/000015). J. Angel Menéndez and Miguel Montes are members of the PTI+SusPlast of the Spanish National Research Council (CSIC)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Engineering 3D Pd/AC catalysts for the continuous production of hydrogen from formic acid

  • Martin, Celia
  • Díaz-Herrezuelo, Irene
  • Navarro, Marina
  • Sanz-Abengozar, Isabel
  • Casas, Jose A.
  • Belmonte, Manuel
  • Quintanilla, Asuncion
Formic acid is a liquid organic hydrogen carrier for the safe hydrogen storage and transport. This study presents the fabrication of 3D-printed activated carbon (AC) monoliths by robocasting and their use as supports for Pd-based catalysts in the continuous hydrogen production (25–55 °C, 0.5–1 M FA, τ = 20–540 gCAT h L−1). The aim is to identify the optimal internal architecture for process scale-up. While monolith geometry does not alter Pd nanoparticle properties (size ∼ 2.2 nm, dispersion 20–28%, Pd2+/Pd0 = 1), it significantly affects flow behaviour and structural robustness. The optimal design, incorporating a central axial channel, achieves initial TOFs up to 5087 h−1 at 55 °C. After over 100 h of operation, only a 23% activity loss is observed. Kinetic analysis reveals a second-order rate law in FA and 36 kJ mol−1 activation energy. These results demonstrate the potential of engineered 3D Pd/AC monoliths for efficient and scalable hydrogen production., The authors acknowledge financial support from the Government of Spain through the projects PID2021-125427OB-I00, TED2021-130312B–I00 and PID2024-157825OB-I00 (MCIU/AEI/FEDER, EU). The authors also thank the “Servicio Interdepartamental de Investigación" (SIdI) of the Universidad Autónoma de Madrid (UAM), with special appreciation to Luis Larumbe (FTIR lab) and María Jesús Redrejo (TXRF lab); the “Centro Nacional de Microscopía Electrónica” (ICTS-CNME) at Universidad Complutense de Madrid (UCM), particularly Esteban Urones; and the “Servicios Centrales de Apoyo a la Investigación” (SCAI), especially María del Valle Martínez de Yuso and María Dolores Marqués from the Porous Solids Lab., The following is the Supplementary data to this article., Peer reviewed