Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Design and assessment of a concentrating solar thermal system for industrial process heat with a copper slag packed-bed thermal energy storage

  • David-Hernandez, Marco Antonio
  • Cazorla-Marín, Antonio|||0000-0003-3314-0395
  • Calderon-Vásquez, Ignacio
  • Battisti, Felipe G.
  • Cardemil, José M.
[EN] Decarbonising the industrial sector is a key part of climate change mitigation targets, and Solar Heat for Industrial Process (SHIP) is a promising technology to achieve this. However, one of the drawbacks of SHIP systems is that they rely on an intermittent energy source. Therefore, sensible energy storage has emerged as a potential solution. In addition, solid byproducts have been proposed as a low-cost but effective material for thermal energy storage (TES). This work presents a SHIP system model coupled with a copper slag-packed-bed TES (PBTES) model using air as heat transfer fluid. The TES has been implemented to preheat the makeup water of the tank where steam is generated. A system design was carried out using a parametric analysis to find a solar field size and a corresponding TES volume. The resulting system was simulated, and the operating variables were analysed in detail. The results show that it is possible to generate 20% more energy due to the storage system. Additionally, a techno-economic analysis indicates that the SHIP with PBTES system results in a payback period of 14 years and a savings of CO2 emissions of 30 t CO2., This work was partially supported by the Research and Development Aid Program (PAID-01-20) of the Universitat Politecnica de Valencia for receiving the Research Fellowship FPI-UPV.2020, as well as the "Programa de Movilidad para estudiantes de doctorado" of the Universitat Politecnica de Valencia. This publication has also been partially supported by the project "DECARBONIZACION DE EDIFICIOS E INDUS-TRIAS CON SISTEMAS HI BRIDOS DE BOMBA DE CALOR", founded by the Spanish "Ministerio de Ciencia e Innovacion (MICIN) " with code number PID2020-115665RB-I00, as well as the R & D project Solar-Steam4IND (TED2021-130614 A -I00) , funded by MICIN/AEI/10.130 39/501100011033 and by the European Union NextGeneration EU/PRTR 2021 call. F. G. Battisti acknowledges the funding from ANID/CONICYT through FONDECYT Postdoctorado 2022 #3220792. J. M. Cardemil and F. G. Battisti acknowledge the financial support from project ANID/FONDAP/1523A0006 "Solar Energy Research Center (SERC) Chile".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enhanced monitoring and dynamics analysis of a concentrated solar thermal experimental plant for steam production

  • David-Hernandez, Marco Antonio
  • Cazorla-Marín, Antonio|||0000-0003-3314-0395
  • Gonzálvez-Maciá, José|||0000-0001-9422-7756
  • Payá-Herrero, Jorge|||0000-0003-2663-3191
  • Frasquet, Miguel
[EN] Solar heat for industrial processes (SHIP) is an increasingly interest option as a key strategy to decarbonise the industrial sector. Linear Fresnel Collectors are a promising technology due to their cost-effectiveness and efficiency. As part of the SOLPINVAP project, an experimental facility was constructed to prove the use of modular Linear Fresnel collectors for steam production in industrial processes. SHIP plants commonly use standard industrial sensors, which can result in high uncertainty when measuring absorbed and produced heat. This can be problematic when selling energy to customers through an energy purchase agreement. To address this issue, an uncertainty analysis was conducted in the experimental plant, and more precise instrumentation was added to the installation. This reduced the uncertainty in the absorbed energy in the solar field from 12% to 3% and obtaining an uncertainty of 3% in the generated energy. Additionally, the operation of the plant was studied through experimental tests conducted during the summer of 2022, and the system dynamics were analysed during the period of peak heat absorption., The authors gratefully acknowledge the company Solatom CSP, for the information and operational data from the SHIP facility, and for the technical support, specially to Juan Martinez and Carlo Terruzzi. This work was partially supported by the Research and Development Aid Program (PAID-01-20) of the Universitat Politecnica de Valencia for receiving the Research Fellowship FPI-UPV-2020. This publication hasbeen carried out in the framework of the project "DECARBONIZACION DE EDIFICIOS E INDUSTRIAS CON SISTEMAS HIBRIDOS DE BOMBA DE CALOR", founded by the Spanish "Ministerio de Ciencia e Innovacion (MICIN) " with code number PID2020-115665RB-I00. The project was also partially funded by the R&D project SolarSteam4IND (TED2021-130614A-I00) , funded by MICIN/AEI/10.13039/501100011033/and by the European Union NextGeneration EU/PRTR 2021 call.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Modelling of a linear Fresnel solar thermal collector system for industrial processes and validation with on-site operational measurements

  • David-Hernandez, Marco Antonio
  • Cazorla-Marín, Antonio|||0000-0003-3314-0395
  • Gonzálvez-Maciá, José|||0000-0001-9422-7756
  • Payá-Herrero, Jorge|||0000-0003-2663-3191
[EN] The industry sector consumes one-third of the world's energy demand, where 70 % is used for heat-intensive processes. To meet this heat demand, fossil fuel-based technologies are typically employed, resulting in high carbon emissions. To decarbonise the industry sector, concentrating solar thermal technologies such as Fresnel collectors have been studied to demonstrate their techno-economic viability. This paper presents a new modular quasi-dynamic model that has been validated using measurements from two experimental campaigns conducted in an existing solar field facility. The model predicts the system's dynamic behaviour accurately, including the pressure evolution inside the tank with an error below 0.1 bar and the solar field temperatures with an error of around 0.5 K. Additionally, the difference between the daily measured and simulated generated energy is below 4.5 % on the analysed days. The model was also used to simulate the annual performance, resulting in a specific energy generation of 1604.5 MJ/m2 and a thermal efficiency of 27.8 %. Furthermore, a techno-economic analysis is conducted, incorporating a 20-year system lifetime, which yielded a payback period of 10 years and potential savings in CO2 emissions of 17.8 tCO2 per year., The company SOLATOM is acknowledged for all the information data of the SHIP plant. This work was partially supported by the Research and Development Aid Program (PAID-01-20) of the Universitat Politecnica de Valencia for receiving the Research Fellowship FPI-UPV.2020. This publication has been carried out in the framework of the project "DECARBONIZACION DE EDIFICIOS E INDUSTRIAS CON SISTEMAS HIBRIDOS DE BOMBA DE CALOR", founded by the Spanish "Ministerio de Ciencia e Innovacion (MICIN)" with code number PID2020-115665RB-I00. The project was also partially founded by the R & D project SolarSteam4IND (TED2021-130614A-I00), funded by MICIN/AEI/10.13039/501100011033 and by the European Union NextGeneration EU/PRTR 2021 call. Funding for open access charge: CRUE-Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Low-Pressure Steam Generation with Concentrating Solar Energy and Different Heat Upgrade Technologies: Potential in the European Industry

  • Payá-Herrero, Jorge|||0000-0003-2663-3191
  • Cazorla-Marín, Antonio|||0000-0003-3314-0395
  • Hassan, Abdelrahman|||0000-0001-9063-9569
  • Arpagaus, Cordin
  • Corrales Ciganda, José Luis
[EN] The industry is currently responsible for around 21% of the total CO2 emissions, mainly due to heat production with fossil fuel burners. There are already different technologies on the market that can potentially reduce CO2 emissions. Nevertheless, the first step for their introduction is to analyze their potential on a global scale by detecting in which countries each of them is more attractive, given their energy prices and resources. The present work involves a techno-economic analysis of different alternatives to replace industrial gas boilers for low-pressure steam production at 120 °C and 150 °C. Solar Heat for Industrial Processes (SHIP) was compared with Electric Boilers (EBs), High-Temperature Heat Pumps (HTHPs), and Absorption Heat Transformers (AHTs). SHIP systems have the potential to reach payback periods in the range of 4 to 5 years in countries with Direct Normal Irradiance (DNI) values above 1400 kWh/m2/year, which is reached in Spain, Italy, Greece, Portugal, and Romania. HTHPs and AHTs lead to the lowest payback periods, Levelized Cost of Heat (LCOH), and highest CO2 emission savings. For both AHTs and HTHPs, payback periods of below 1.5 years can be reached, particularly in countries with electricity-to-gas price ratios below 2.0., This work was partially funded by the grant agreement No. 101069689 (PUSH2HEAT project) of the European Union s Horizon 2020 research and innovation program, and by the Spanish Agencia Estatal de Investigación (AEI) for the project Generación de vapor para la industria utilizando reflectores lineales Fresnel (SolarSteam4IND, TED2021-130614A-I00) in the framework of Proyectos de transición ecológica y transición digital 2021 . In addition, the financial support of the Swiss Federal Office of Energy SFOE as part of the SWEET (SWiss Energy research for the Energy Transition) project DeCarbCH (www.sweet-decarb.ch (accessed on 17 February 2024)) is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Protocol and experimental in-field reflectance characterization of a Linear Fresnel solar field for process heat in Spain

  • Sobrino-Díaz, José David
  • Fernández-García, Aránzazu
  • Cazorla-Marín, Antonio|||0000-0003-3314-0395
  • Carot Sierra, José Miguel|||0000-0001-6524-1639
  • Payá-Herrero, Jorge|||0000-0003-2663-3191
[EN] Concentrating Solar Power (CSP) plants are generally placed in warm, arid or semi-arid regions with frequent dust and sand. Soiling inevitably hinders the plants' performance. This paper deals with the experimental characterization of a 37 kW Linear Fresnel (LFR) solar field located in Valencia (Spain). The spectral reflectance has been measured with the reflectometer Devices & Services 15R-USB. A full protocol has been established to measure and characterize the mean solar field reflectance. A 3-month experimental campaign has been performed to quantify the effect of soiling. The results show that the reflectance generally follows a normal distribution in same rows of the solar field. The main factors obtained with a multifactor ANOVA test are the rows, facets and the number of weeks since the last cleaning. The average solar field reflectance dropped down to 82.5 % after 3 months with no rain. The mean soiling rate is 0.16 %/day. Measuring around one point per facet helps reach less than 1 % error in most soiling conditions. The same methodology will be soon extended to a 4.2 MW solar field located in a brewery industry., This work has been partially funded by the Spanish "Agencia Estatal de Investigacion (AEI) " for the project "Generacion de vapor para la industria utilizando reflectores lineales Fresnel" (SolarSteam4IND, TED2021-130614A-I00) in the framework of "Proyectos de transicion ecologica y transicio n digital 2021". The authors also want to acknowledge the company SOLATOM for the access to their SHIP installation, and for their support during the experimental campaign.