Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synergetic Near- and Far-Field Plasmonic Effects for Optimal All-Perovskite Tandem Solar Cells with Maximized Infrared Absorption

  • Bueno, Jaime
  • Carretero-Palacios, Sol
  • Anaya, Miguel
The efficiency and reliability of perovskite solar cells have rapidly increased in conjunction with the proposition of advanced single-junction and multi-junction designs that allow light harvesting to be maximized. However, Sn-based compositions required for optimized all-perovskite tandem devices have reduced absorption coefficients, as opposed to pure Pb perovskites. To overcome this, we investigate near- and far-field plasmonic effects to locally enhance the light absorption of infrared photons. Through optimization of the metal type, particle size, and volume concentration, we maximize effective light harvesting while minimizing parasitic absorption in all-perovskite tandem devices. Interestingly, incorporating 240 nm silver particles into the Pb-Sn perovskite layer with a volume concentration of 3.1% indicates an absolute power conversion efficiency enhancement of 2% in the tandem system. We present a promising avenue for experimentalists to realize ultrathin all-perovskite tandem devices with optimized charge carrier collection, diminishing the weight and the use of Pb. © 2024 The Authors. Published by American Chemical Society., support by the Spanish Ministry of Science and Innovation through a Ramón y Cajal Fellowship (RYC2021-034941-I). J.B. acknowledges support by the Programa Investigo funded by the European Union “NextGenerationEU”/ PRTR. The authors also acknowledge financial support of the Spanish Ministry of Science and Innovation under Grants TED2021-131001A-I00, CNS2022-135967, and PID2022-142525OA-I00 funded by MCIN/AEI/10.13039/ 501100011033 and by the European Union “NextGenerationEU”/ PRTR, and Grant RED2022-134939-T., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Incorporating thermal co-evaporation in current-matched all-perovskite triple-junction solar cells

  • Yang, Terry Chien-Jen
  • Kang, Taeheon
  • Fitzsimmons, Melissa
  • Vega, Guadalupe
  • Lu, Yang
  • Rosado, Leo
  • Jiménez-Solano, Alberto
  • Pan, Linfeng
  • Zelewski, Szymon J
  • Ferrer Orri, Jordi
  • Chiang, Yu-Hsien
  • Guo, Dengyang
  • Ooi, Zher Ying
  • Han, Yutong
  • Xu, Weidong
  • Roose, Bart
  • Ducati, Caterina
  • Carretero-Palacios, Sol
  • Anaya, Miguel
  • Stranks, Samuel D
Thermal co-evaporation of halide perovskites is a solution-free, conformal, scalable, and controllable deposition technique with great potential for commercial applications, particularly in multi-junction solar cells. Monolithic triple-junction perovskite solar cells have garnered significant attention because they can achieve very high efficiencies. Nevertheless, challenges arise in fabricating these devices, as they require multiple layers and precise current matching across complex absorber stacks. Here we demonstrate a current-matched monolithic all-perovskite p-i-n triple-junction solar cell enabled by controlled thermal co-evaporation of various absorber layers in the stack. The top and middle subcells were fabricated by developing optimized thermally co-evaporated Cs0.3FA0.7Pb(I0.56Br0.44)3 (1.80 eV bandgap) and FAPbI3 (1.53 eV) perovskites, respectively, while the bottom subcell employed a solution-processed Cs0.25FA0.75Pb0.5Sn0.5I3 (1.25 eV) perovskite. By optimising absorber thicknesses and compositions through optical modelling, we achieve excellent current matching between the top (9.6 mA cm-2), middle (9.3 mA cm-2), and bottom subcells (9.0 mA cm-2), achieving an overall efficiency of 15.8%. Optical modelling simulations suggest that current matching and efficiency up to 11.4 mA cm-2 and 37.6% respectively could be attainable using the latest interlayer materials. This work highlights the potential of scalable vapour-based deposition techniques for advancing multi-junction perovskite-based solar cells, paving the way for future developments in this field., The authors acknowledge the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program (HYPERION, grant agreement No. 756962), Cambridge Royce facilities grant EP/P024947/1, Sir Henry Royce Institute—recurrent grant EP/R00661X/1 with additional funding from the “Centre for Advanced Materials for Integrated Energy Systems (CAM-IES)” (EP/P007767/1), and the Engineering and Physical Sciences Research Council (EPSRC) (grant agreement No. EP/R023980/1, EP/T02030X/1 and EP/S030638/1, EP/V012932/1, and H2CAT). T. C.-J. Y acknowledges the support of the MSCA Individual Fellowship from the European Union's Horizon 2020 (PeTSoC, No. 891205). M. R. F. acknowledges funding from the EPSRC Centre for Doctoral Training in Connected Electronic and Photonic Systems (EP/S022139/1). G. V. and M. A. acknowledge the BBVA Foundation for their support through a Leonardo Fellowship. L. R., A. J.-S., S. C. P. and M. A. acknowledge grants TED2021-131001A-I00, CNS2022-135967, RYC2021-034941-I and PID2022-142525OA-I00 funded by MICIU/AEI/10.13039/501100011033, the European Union "NextGenerationEU"/PRTR and FEDER, EU. A. J.-S. gratefully acknowledges the Spanish Ministry of Universities for funding through a Beatriz Galindo Research fellowship BG20/00015. S. J. Z. acknowledges support from the Polish National Agency for Academic Exchange within the Bekker program (grant no. PPN/BEK/2020/1/00264/U/00001). Z. Y. O. acknowledges the scholarship from St John's College, University of Cambridge. J. F. O and C. D. acknowledge funding from the Engineering and Physical Sciences Research Council (EPSRC) Nano Doctoral Training Centre (EP/L015978/1). L. P. acknowledges funding from the Swiss National Science Foundation under the Early Postdoc. Mobility fellowship (P2ELP2_195109). Y.-H. C. acknowledges the Taiwan Cambridge Trust and Rank Prize fund. The authors would like to thank Alexander Ehm, Simon Kahmann, and Dietrich RT Zahn from the Institute of Physics, Chemnitz University of Technology, 09107 Chemnitz, Germany for support on ellipsometry characterisation of various samples. We thank Steve Haws for technical support with all the Royce Ambient Cluster related equipment and maintenance. For the purpose of open access, the authors have applied a Creative Commons Attribution (CC BY) license to any Author Accepted Manuscript version arising from this submission., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Plasmonic nanoparticles boost low-current perovskite LEDs governed by photon recycling effects

  • Bueno, Jaime
  • Jiménez-Solano, Alberto
  • Anaya, Miguel
  • Carretero-Palacios, Sol
Perovskite light-emitting diodes (PeLEDs) have emerged as a promising technology for next-generation display and lighting applications, thanks to their remarkable colour purity, tunability, and ease of fabrication. In this work, we explore the incorporation of plasmonic spherical nanoparticles (NPs) directly embedded into the green-emitting CsPbBr3 perovskite layer in a PeLED as a strategy to enhance both its optical and electrical properties. We find that plasmonic effects directly boost spontaneous emission while also influencing charge carrier recombination dynamics. We present a rigorous theoretical electro-optical analysis to systematically investigate the impact of NP metal, size, and concentration on device performance, with particular emphasis on the role of photon recycling (PR). Our results demonstrate that embedding carefully designed silver (Ag) NPs, selected through rigorous theoretical modelling, into PeLEDs leads to enhanced device performance across a wide range of operating currents. Notably, we observe a 4-fold improvement in external quantum efficiency (EQE) at injection currents as low as 0.02 mA cm-2, and a 2-fold enhancement at 0.2 mA cm-2, attributed to increased radiative recombination. Furthermore, results suggest improved efficiency retention at higher injection levels, pointing to reduced current roll-off limitations and extended high-brightness operation. Additionally, PR plays a crucial role in mitigating optical losses and improving outcoupling efficiency, especially in plasmonic-enhanced systems, where scattering effects increase the prevalence of trapping states. These findings open up exciting possibilities for devices requiring energy-efficient, compact, and high-performance light sources, such as portable electronics and low-power displays., M. A. acknowledges financial support from the MICIU/AEI/ 10.13039/501100011033 and the European Union NextGenerationEU/PRTR through a Ram´on y Cajal Fellowship (RYC2021-034941-I). M. A. also acknowledges the BBVA Foundation for their support through a Leonardo Fellowship. A. J.-S. gratefully acknowledges Spanish Ministry of Universities for funding through a Beatriz Galindo Fellowship (BG20/00015). S. C y J. B acknowledge the Severo Ochoa Centres of Excellence program through Grant CEX2024-001445-S. J. B also acknowledges Comunidad de Madrid for funding through the PIPF- 2023/ECO-30481 fellowship. We also acknowledge grants TED2021-131001A-I00 and CNS2022-135967 funded by MICIU/ AEI/10.13039/501100011033 and by the European Union “NextGenerationEU”/PRTR. We also acknowledge grant PID2022-142525OA-I00 funded by MICIU/AEI/10.13039/ 501100011033 and by FEDER, EU., Peer reviewed