Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Nanofluids Based on Pd Nanoparticles and a Linear Silicone-Based Fluid: Toward Highly Efficient Heat Transfer Fluids for Concentrated Solar Power

  • Santos Martínez, Deseada María de los
  • Gallardo Bernal, Juan Jesús
  • Carrillo Berdugo, Iván
  • Alcántara Puerto, Rodrigo
  • Estellé, Patrice
  • Gragera García, Saray
  • Gragera García, María
  • Navas Pineda, Francisco Javier
Meeting the growing energy demand with the lowest environmental impact is one of the greatest challenges facing our society. To this end, improving the efficiency of solar energy technologies is a must. In this work, nanofluids based on a linear silicone-based fluid and Pd nanoparticles were prepared. The linear silicone-based fluid has been designed for use in concentrated solar power involving parabolic trough collector technology (CSP-PTC). The nanofluids showed high physical and chemical stability. In addition, the Pd-based nanofluids showed enhanced isobaric specific heat and thermal conductivity values without a significant increase in viscosity. The increase in the specific heat with respect to the base fluid was about 5.5%, while thermal conductivity increased by 8.5%. Analyzing the interactions between the nanoparticles and the base fluid provides a clearer understanding of the improvements in these properties. Finally, the properties measured were used to analyze the performance of the nanofluids in CSP-PTC, considering the collector and the exchanger efficiency. The overall efficiency improved by about 50%, which is a promising result.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Colloidal suspensions of totally inorganic perovskites nanoparticles: A new photoluminescent emission in the near-IR

  • Rodríguez Fernández, María Isabel
  • Piñero Charlo, José Carlos
  • Alcántara Puerto, Rodrigo
  • Navas Pineda, Francisco Javier
Luminescent materials have attracted great attention due to the amazing applications. In this sense, perovskite halide materials have shown promising luminescent properties which allows them to be useful in various applications such as LEDs, sensors. In this work, colloidal suspensions of CsPbI3 and Pd-doped CsPbI3 perovskite nanoparticles were prepared at different temperatures, and their structure and luminescence properties were characterized to analyse the effect of the synthesis temperature and the Pd-doping. With the increase of temperature, the main photoluminescence band of perovskite nanoparticles are slightly red-shifted. But the most amazing result is that the Pd-doped CsPbI3 shows a new emission band at 877 nm under excitation at 785 nm. Therefore, this compound may be used as a highly sensitive luminescent sensor in several applications, such as in biosystems due to their emission in the first biological window under NIR excitation
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Morphology does not matter: WSe<sub>2</sub> luminescence nanothermometry unravelled

  • Martínez Merino, Paloma
  • Hernández Rodríguez, Miguel A.
  • Piñero Charlo, José Carlos
  • Brites, Carlos D. S.
  • Alcántara Puerto, Rodrigo
  • Navas Pineda, Francisco Javier
Transition metal dichalcogenides, including WSe2, have gained significant attention as promising nanomaterials for various applications due to their unique properties. In this study, we explore the temperature-dependent photoluminescent properties of WSe2 nanomaterials to investigate their potential as luminescent nanothermometers. We compare the performance of WSe2 quantum dots and nanorods synthesized using sonication synthesis and hot injection methods. Our results show a distinct temperature dependence of the photoluminescence, and conventional ratiometric luminescence thermometry demonstrates comparable relative thermal sensitivity (0.68–0.80% K−1) and temperature uncertainty (1.3–1.5 K), irrespective of the morphology of the nanomaterials. By applying multiple linear regression to WSe2 quantum dots, we achieve enhanced thermal sensitivity (30% K−1) and reduced temperature uncertainty (0.1 K), highlighting the potential of WSe2 as a versatile nanothermometer for microfluidics, nanofluidics, and biomedical assays.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Efficient nanofluids based on Ag nanoparticles and a linear silicone-based fluid for concentrating solar power

  • Santos Martínez, Deseada María de los
  • Gallardo Bernal, Juan Jesús
  • Carrillo Berdugo, Iván
  • Alcántara Puerto, Rodrigo
  • Navas Pineda, Francisco Javier
Improving the efficiency of renewable energy sources can lead to obtaining electrical energy in an environmentally-friendly way. Therefore, the development of nanofluids for use in parabolic trough collectors in concentrated solar energy (CSP-PTC) is a research line of interest. Thus, in this work, nanofluids based on Ag nanoparticles and a polydimethylsiloxane (PDMS) type fluid used in CSP-PTC technology were prepared. The use of this fluid in this technology and the preparation of nanofluids based on it has not been studied widely, and the evaluation of the use of nanofluids from this type fluid is of great interest. Thus, the physical stability and the properties of interest measured, that are density, surface tension, viscosity, isobaric specific heat and thermal conductivity, were characterized. The nanofluids prepared presented interesting thermal properties. An increase of up to 4.5 % in the isobaric specific heat and up to 24 % in thermal conductivity were observed with respect to the base fluid, without a significant increase in viscosity. Thus, an increase in the heat transfer coefficient of up to 16 % was obtained. These results are really promising for the use of the nanofluids prepared in CSP-PTC technology. Finally, the moderate increase in isobaric specific heat and the significant increase in thermal conductivity is explained by the weak Van der Waals force interaction observed between the Ag surfaces and the PDMS molecules.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Photoluminescent Bi-doped CsPbX3 (X: Br, I) perovskite quantum dots for optoelectronic devices

  • Rodríguez Fernández, María Isabel
  • Gragera García, Saray
  • Piñero Charlo, José Carlos
  • Alcántara Puerto, Rodrigo
  • Navas Pineda, Francisco Javier
Abstract: Perovskite quantum dots (PQDs) became a hot spot in recent years due to their amazing properties, such as the high photoluminescence quantum yield, tunable emission, and narrow bandwidth being important for their application in different optoelectronic devices. In this work, Bi-doped CsPbBr3 and Bi-doped CsPbI3 PQDs were synthesized through the hot-injection method and compared with pristine CsPbBr3 and CsPbI3 to analyze the effect of Bi and the halogen on their properties. In addition, all the samples were synthesized at 130°C, 150°C, and 170°C with the aim of analyzing the effect of the temperature. The results showed a wide range of the emission wavelength from around 500 nm (Bi-doped CsPbBr3) to 630 nm (Bi-doped CsPbI3) as a consequence of the effect of the halogen in “X” position and a slight blueshift in the main photoluminescence emission band after doping the pristine quantum dots with Bi. Graphical abstract: (Figure presented.) Impact statement: We believe that the work in this article represents an important advance in the application of perovskite quantum dots in optoelectronics applications, such as in LEDs or lasers. We report here the synthesis and characterization of Bi-doped CsPbX3 perovskite quantum dots (PQDs), being X: Br and I. These Bi-doped PQDs show a wide range of the emission wavelength from around 500 nm (Bi-doped CsPbBr3) to 630 nm (Bi-doped CsPbI3) as a consequence of the effect of the halogen in “X” position and a slight blueshift in the main photoluminescence emission band after doping the pristine quantum dots with Bi. Therefore, they are good candidates to fabricate optoelectronic devices such as LEDs and lasers thanks to their high photoluminescence emission and their tunable emission.