Pasar al contenido principal

NANOFLUIDOS AVANZADOS BASADOS EN NANOESTRUCTURAS 1D Y 2D PARA ENERGIA SOLAR DE CONCENTRACION: HACIA SU ALTA ESTABILIDAD Y PROPIEDADES TERMICAS MEJORADAS

RTI2018-096393-B-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE CADIZ

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Optical and transport properties of metal-oil nanofluids for thermal solar industry: experimental characterisation, performance assessment and molecular dynamics insights

  • Carrillo Berdugo, Iván
  • Estellé, Patrice
  • Sani, Elisa
  • Mercatelli, Luca
  • Grau Crespo, Ricardo
  • Zorrilla Cuenca, David
  • Navas Pineda, Francisco Javier
Concentrating solar power (CSP) technology can become a very valuable contributor to the transformation and decarbonization of our energy landscape, but for this technology to overcome the barrier toward market deployment, significant enhancements in the solar-to-thermal-to-electric energy conversión efficiency are needed. Here, an in-depth experimental analysis of the optical and transport properties of Pd-containing aromatic oil-based nanofluids is presented, with promising results for their prospective use as volumetric absorbers and heat transfer fluids in next-generation parabolic-trough CSP plants. A 0.030 wt % concentration of Pd nanoplates increases sunlight extinction by 90% after 20 mm propagation length and thermal conductivity by 23.5% at 373 K, which is enough to increase the overall system efficiency up to 45.3% and to reduce pumping requirements by 20%, with minimum increases in the collector length. In addition to that, molecular dynamics simulations are used to gain atomistic-level insights about the heat and momentum transfer in these nanofluids, with a focus on the role played by the solid−liquid interface in these phenomena. Molecules chemisorbed at the interface behave as a shelter-like boundary that hinders heat conduction, as a high thermal resistance path, and minimizes the impact of the solid on dynamic viscosity, as it weakens the interactions between the nanoplate and the surrounding nonadsorbed fluid molecules.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

WSe2 nanowires-based nanofluids for concentrating solar power

  • Navas, Javier
  • Martínez Merino, Paloma
  • Alcántara Puerto, Rodrigo
  • Navas Pineda, Francisco Javier
10.1016/j.mtchem.2022.101323, Tungsten selenide belongs to the family of inorganic compounds denominated transition metal dichal- cogenides (TMDCs). There is emerging interest in these compounds in the field of optoelectronics, catalysis, sensing or energy storage, among others. Most works focus on the use of these materials in their 2D form but there is scarce research on the study of TMDCs nanomaterials with one-dimensional morphology. In this work, we explore the thermophysical properties of nanofluids based on 1D-WSe2 nanostructures with the aim of studying the feasibility of these nanofluids as heat transfer fluids in concentrating solar power plants. In this respect, nanofluids with a high heat transfer rate could increase the thermal efficiency of solar power plants, which would reduce the energy dependence on fossil fuels. Nanofluids of 0.02 wt%, 0.05 wt% and 0.10 wt% WSe2 concentrations have been prepared by the two-step method considering a thermal fluid used in solar power plants as the base fluid. The results of extinction coefficient evolution, z potential and particle size in suspension show a high colloidal stability over time of the prepared nano fluids mainly because of the high aspect ratio of the 1D-WSe2 nanomaterial. Additionally, the one-dimensionality and length of the synthesized nanowires favors the transport of heat in controlled directions, obtaining increases in thermal conductivity with respect to the base fluid of up to 16.8% in the highest concentration nanofluid. Improvements in isobaric specific heat of up to 15.7% and heat transfer of up to 20.8% compared to the base fluid have also been found. The results of this paper provide evidence that the presence of WSe2 nanowires induces increases in the thermal properties of the fluid commonly used in concentrating solar power plants without inducing agglomeration or sedimentation problems. Therefore, the nanofluids based on 1D-WSe2 nanostructures prepared in this work have a high potential to be used as heat transfer fluids in concentrating solar power plants based on parabolic trough collectors.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Tuning the structural, optical and photoluminescence properties of hybrid perovskite quantum dots by A-site doping

  • Gallardo Bernal, Juan Jesús
  • Blanco Ollero, Eduardo
  • Sánchez Coronilla, Antonio
  • Piñero Charlo, José Carlos
  • Navas Pineda, Francisco Javier
Hybrid organic-inorganic perovskites have been widely investigated in recent years due to their role as light absorbers in highly efficient solar cells and as emitters. Consequently, to control the emission properties of perovskite quantum dots (PQDs) is of great interest. In this study, Csx MA(1-x) PbI3 PQDs were synthesized. A shift in the emission peak from 670 to 740 nm was found for x≥0.2, and the quantum yield (QY) and recombination lifetime were affected when Cs was incorporated. The shift in the emission is observed to be due to the displacement of the valence band edge, but this is not because of an electronic effect resulting from the Cs incorporation, as observed from the PDOS analyses. It is likely due to the transition from tetragonal to orthorhombic phase of the PQDs when the Cs amount increased. Therefore, the emission properties of the PQDs synthesized can be regulated according to the amount of Cs incorporated in their network.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Tesis doctoral (DoctoralThesis)

Development of 2d metallic nanomaterials for nanofluids with application in concentrating solar power, Desarrollo de nanomateriales 2d metálicos para nanofluidos con aplicación en energía solar de concentración

  • Carrillo Berdugo, Iván
The cost-effective optimisation of renewable power generation systems is a must in the present context of a global climate crisis and a growing demand for reliable, affordable and clean power supply. Reliability is a challenging issue for renewable technologies like photovoltaics, which produces electricity under ceaseless solar irradiation and therefore suffers of daily intermittency. The integration of concentrated solar power plants in hybrid power blocks has been proposed as a solution for this intermittency by taking advantage of thermal energy storage to maintain production and compensate the supply. A limitation for this solution is the low solar-to-thermal energy conversion due to the poor thermophysical properties of the typical heat transfer fluid flowing through solar collectors. The use of nanofluids as has been proposed to improve this conversion. This thesis aims to provide knowledge and understanding of the Physical Chemistry of nanofluids, with particular attention to features and processes that determine their stability and heat transfer and storage capabilities. Here Pd nanoplate-containing aromatic oil-based nanofluids have been prepared and characterised through different techniques to assess their applicability as volumetric absorbers and heat transfer fluids in parabolic trough collectors of concentrating solar power plants. A significant contribution from this thesis refers to the influence of the structure and dynamics of solid-liquid interfaces on the physical properties of nanofluids on the basis of simulations at the density functional theory and molecular dynamics levels-of-theory. The findings presented are expected to have both practical and fundamental implications on future research., La optimización del rendimiento de los sistemas de producción eléctrica renovable es una necesidad en el contexto actual, caracterizado por una crisis climática global y una creciente demanda por un suministro eléctrico fiable, rentable y limpio. La fiabilidad es un tema desafiante para algunas tecnologías renovables como la fotovoltaica, que producen electricidad únicamente bajo irradiación solar incesante y sufre, por tanto, de intermitencia diaria. La inclusión de plantas de energía solar de concentración en bloques híbridos de potencia constituye una prometedora solución para esta intermitencia, por aprovechamiento del almacenamiento térmico de energía para mantener la producción y compensar el suministro. Una limitación de esta solución es la baja eficiencia de la conversión solar-térmica por las deficientes propiedades termofísicas del fluido de transferencia de calor que circula a través de los colectores solares. Se propone el uso de nanofluidos para mejorar la eficiencia de conversión. Esta tesis pretende aportar conocimiento y comprensión sobre la Química Física de los nanofluidos, con particular atención a todos aquellos aspectos y procesos que determinan su estabilidad y aptitud para la transferencia y almacenamiento de calor. Se han preparado nanofluidos con nanoplates de Pd en un aceite aromático y se han caracterizado mediante diferentes técnicas para evaluar su aplicabilidad como absorbedores volumétricos y fluidos transferentes de calor en colectores cilindro-parabólicos de plantas de energía solar de concentración. Una contribución significativa de esta tesis se refiere a la influencia de la estructura y dinámica de la interfase sólido-líquido en las propiedades físicas de los nanofluidos, en base a simulaciones desarrolladas en el contexto de la Teoría del Funcional de la Densidad y de la Dinámica Molecular. Se espera que los hallazgos que aquí se presentan tengan implicaciones prácticas y fundamentales en investigaciones futuras.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Insights into the stability and thermal properties of WSe2-based nanofluids for concentrating solar power prepared by liquid phase exfoliation

  • Martínez Merino, Paloma
  • Sánchez-Coronilla, Antonio
  • Alcántara Puerto, Rodrigo
  • Martín, Elisa I.
  • Navas Pineda, Francisco Javier
10.1016/J.MOLLIQ.2020.114333, Nanofluids are considered the new generation of heat transfer fluids thanks to their improved thermophysical properties compared with conventional fluids. However, little research has been performed into the thermal properties, stability and preparation of nanofluids based on two-dimensional nanostructures. In this paper, we discuss the preparation of nanofluids based on 2D-WSe2 nanostructures prepared by liquid phase exfoliation applying two different sources of ultrasound. The base fluid for these nanofluids is a eutectic mixture of biphenyl and diphenyl oxide used as a heat transfer fluid in the parabolic trough collectors of concentrating solar power plants. The 2DWSe2-based nanofluids were characterized for their stability and thermal properties. Treatment with ultrasonic tip resulted in remarkable improvements in the exfoliation of the nanomaterial and stable nanofluids. At a molecular level, periodic-DFT calculations were performed to understand the stability of the 2D-WSe2 -based nanofluids from the perspective of the arrangement of the surfactant molecules around the WSe 2 nanosheets. The results suggest that the most favoured interaction with the WSe2 sheets occurs through the hydroxyl terminal group of Triton-X. The hydrogen bond interaction between the H atom of the -OH group of Triton-X and three Se atoms on the surface of the sheet plays a stabilizing role in the system. Thus, the arrangement of the surfactant must facilitate the exfoliation of the WSe 2 sheets. Furthermore, WSe 2 nanosheets were found to improve the thermal conductivity by up to 39% and the specific heat by up to 9.3%, resulting in an increase in the heat transfer of up to 26%. The results of this study have revealed the great potential of 2D-WSe2 based nanofluids as heat transfer fluids in CSP plants.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

MoS2-based nanofluids as heat transfer fluid in parabolic trough collector technology

  • Martínez Merino, Paloma
  • Alcántara Puerto, Rodrigo
  • G omez-Larrán, Pedro
  • Carrillo Berdugo, Iván
  • Navas Pineda, Francisco Javier
Concentrating solar power is becoming one of options for producing energy to replace conventional polluting energy sources. However, improving the efficiency and reducing the cost of technologies based on this type of energy to make it more competitive is still a work in progress. This study proposes replacing the thermal oil used as the heat transfer fluid in the absorber tubes of parabolic trough solar collectors (PTCs) with nanofluids based on spherical molybdenum disulphide nanoparticles with the aim of improving the thermal efficiency of concentrating solar power plants. The colloidal stability of the nanofluids was verified by UltravioleteVisible spectroscopy, Zeta potential and Dynamic Light Scattering monitoring. The presence of spherical MoS2 nanoparticles resulted in an increase of up to 13% in specific isobaric heat and 6% in thermal conductivity compared to thermal oil. Finally, the efficiency of parabolic trough solar collectors was estimated to increase by 5%, which also favours the decrease of pumping power and the elimination of selective coatings on the absorber tube. To our knowledge, this is the first time that MoS2-based nanofluids are tested as heat transfer fluids in PTCs analysing its implementation in the solar energy application. © 2022 The Authors. Published by Elsevier Ltd. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)., We acknowledge Ministerio de Ciencia, Innovaci?n y Universidades del Gobierno de Espa?a for funding under Grant No. RTI2018-096393-B-I00 and for financial support related to measurements of thermal properties, which were performed using devices acquired under Grant No. UNCA15-CE-2945. Also, this research was funded by 2014?2020 ERDF Operational Programme and by the Department of Economy, Knowledge, Business and University of the Regional Government of Andalusia, grant number FEDER-UCA18-107510.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Interface chemistry effects in nanofluids: Experimental and computational study of oil-based nanofluids with gold nanoplates

  • Carrillo Berdugo, Iván
  • Sampalo Guzmán, Javier
  • Grau Crespo, Ricardo
  • Zorrilla Cuenca, David
  • Navas Pineda, Francisco Javier
The chemistry of interfaces and its relation with energy storage at and transport through solid-liquid interfaces in heat transfer nanofluids is a very unexplored terrain. Here we discuss how the magnitude of the changes in specific heat and thermal conductivity of the base fluid, upon dispersion of a nanoma-terial, depends on the surface chemistry of that nanomaterial. We focus on nanofluids with Au nanoplates from an integrated experimental and theoretical perspective, and compared our findings with those pre-viously reported for nanofluids with Pd nanoplates in the same base fluid. Pd and Au are known to have different surface chemistry, and so are the structures of the solid-liquid interfaces and the thermal prop-erties of these nanofluids. It was experimentally found that for mass fractions in the order of 0.01 wt%, Pd and Au nanoplates provide enhancements of 5.9% and 1.6% in specific heat, and enhancements of 12.5% and 17.9% in thermal conductivity, at 373 K. It was verified using density functional theory and classical molecular dynamics simulations that base fluid molecules can chemisorb on Pd surfaces, but not on Au surfaces. This work suggests that the stronger interactions between species at solid-liquid interfaces, the higher the specific heat enhancements and the lower the thermal conductivity enhancements at high temperature.(c) 2022 The Author(s). Published by Elsevier B.V.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Morphology does not matter: WSe<sub>2</sub> luminescence nanothermometry unravelled

  • Martínez Merino, Paloma
  • Hernández Rodríguez, Miguel A.
  • Piñero Charlo, José Carlos
  • Brites, Carlos D. S.
  • Alcántara Puerto, Rodrigo
  • Navas Pineda, Francisco Javier
Transition metal dichalcogenides, including WSe2, have gained significant attention as promising nanomaterials for various applications due to their unique properties. In this study, we explore the temperature-dependent photoluminescent properties of WSe2 nanomaterials to investigate their potential as luminescent nanothermometers. We compare the performance of WSe2 quantum dots and nanorods synthesized using sonication synthesis and hot injection methods. Our results show a distinct temperature dependence of the photoluminescence, and conventional ratiometric luminescence thermometry demonstrates comparable relative thermal sensitivity (0.68–0.80% K−1) and temperature uncertainty (1.3–1.5 K), irrespective of the morphology of the nanomaterials. By applying multiple linear regression to WSe2 quantum dots, we achieve enhanced thermal sensitivity (30% K−1) and reduced temperature uncertainty (0.1 K), highlighting the potential of WSe2 as a versatile nanothermometer for microfluidics, nanofluidics, and biomedical assays.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Multifunctional microcapsules based on ZnO and n-octadecane: From thermal energy storage to photocatalytic activity

  • Sánchez Fernández, Javier
  • Aguilar Sánchez, María Teresa
  • Carrillo Berdugo, Iván
  • Gallardo Bernal, Juan Jesús
  • Navas Pineda, Francisco Javier
Energy management is one of the most important issues to be addressed in the near future in many fields, one of which is buildings. In this sense, new phase change materials (PCM) are being widely studied for storing energy. Encapsulating PCM is a good way to incorporate these materials into different applications in which energy storage is useful. In this study, microcapsules based on ZnO containing n-octadecane as a phase change material were synthesized and characterized with regard to their structural, morphological and optical properties according to several synthesis parameters, such as the proportion of precursors, stirring rate and ageing time. The microcapsules were characterized using x-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy, and UV–Vis spectroscopy in diffuse reflectance mode. The presence of n-octadecane inside the capsules was confirmed. Their thermal behaviour was analysed by means of differential scanning calorimetry. Heating/cooling cycles were performed, after which the microcapsules presented good stability. Furthermore, the encapsulation efficiency was estimated from melting and crystallization enthalpy values, reaching a value of 23.1%. Moreover, the isobaric specific heat of the microcapsules is higher than that of ZnO, which means that substituting ZnO with microcapsules in buildings leads to an important increase in the amount of sensible heat stored. Finally, the photocatalytic activity of the microcapsules was analysed by studying the photodegradation of Crystal Violet dye. The degradation rate increased when the microcapsules were present, so the photocatalytic activity of the microcapsules was confirmed under UV and visible irradiation, which is of interest because they can be used to remove organic pollutants from buildings., 10 páginas
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Tesis doctoral (DoctoralThesis)

Nanofluids with optimised thermal properties based on metal chalcogenides with different morphology

  • Martínez Merino, Paloma
Over the last decades, the interest around renewable energies has increased considerably because of the growing energy demand and the environmental problems derived from fossil fuels combustion. In this scenario, concentrating solar power (CSP) is a renewable energy with a high potential to cover the global energy demand. However, improving the efficiency and reducing the cost of technologies based on this type of energy to make it more competitive is still a work in progress. One of the current lines of research is the replacement of the heat transfer fluid used in the absorber tube of parabolic trough collectors with nano-colloidal suspensions of nanomaterials in a base fluid, typically named nanofluids. Nanofluids are considered as a new generation of heat transfer fluids since they exhibit thermophysical properties improvements compared with conventional heat transfer fluids. But there are still some barriers to overcome for the implementation of nanofluids. For example, obtaining nanofluids with high stability is a priority challenge for this kind of system. Also ensuring that nanoparticles will not clog pipes or cause pressure drops. In this Doctoral Thesis, the use of transition metal dichalcogenide-based nanofluids as a heat transfer fluid in solar power plants has been investigated for the first time. Specifically, nanofluids based on one-dimensional, two-dimensional and three-dimensional MoS2 , WS2 and WSe2 nanostructures have been researched. The base fluid used in the preparation of these nanofluids is the eutectic mixture of biphenyl and diphenyl oxide typically employed as heat transfer fluid in concentrating solar power plants. Mainly two preparation methods have been explored: the liquid phase exfoliation method, and the solvothermal synthesis of the nanomaterial and its subsequent dispersion in the thermal oil by ultrasound. Experimental parameters such as surfactant concentration, time and sonication frequency for preparation of nanofluids have also been analysed. The nanofluids have been subjected to an extensive characterisation which includes the study of colloidal stability over time, characterisation of thermal properties such as isobaric specific heat or thermal conductivity, rheological properties and optical properties. The results have revealed that nanofluids based on 1D and 2D nanostructures of transition metal dichalcogenides are colloidally stable over time and exhibit improved thermal properties compared to the typical thermal fluid used in solar power plants. The most promising nanofluids are those based on MoS 2 nanosheets and those based on WSe 2 nanosheets with heat transfer coefficient improvements of 36.2% and 34.1% respectively with respect to thermal oil. Furthermore, the dramatic role of WSe2 nanosheets in enhancing optical extinction of the thermal oil suggests the use of these nanofluids in direct absorption solar collectors. In conclusion, the present work demonstrates the feasibility of using nanofluids based on transition metal dichalcogenide nanostructures as heat transfer fluids in concentrating solar power plants based on parabolic trough collectors., En las últimas décadas, el interés en torno a las energías renovables ha aumentado considerablemente debido a la creciente demanda energética y a los problemas medioambientales derivados de la combustión de combustibles fósiles. En este escenario, la energía solar de concentración (CSP) es una energía renovable con un alto potencial para cubrir la demanda energética mundial. Sin embargo, es necesario trabajar para mejorar la eficiencia y reducir el coste de las tecnologías basadas en este tipo de energía con el objetivo de hacerla más competitiva. Una de las líneas de investigación actuales es la sustitución del fluido caloportador utilizado en el tubo absorbedor de los colectores cilindroparabólicos por suspensiones nanocoloidales de nanomateriales en un fluido base, típicamente denominados nanofluidos. Los nanofluidos se consideran una nueva generación de fluidos de transferencia de calor, ya que presentan mejoras en sus propiedades termofísicas en comparación con los fluidos de transferencia de calor convencionales. Pero aún quedan algunos obstáculos por superar para la aplicación de los nanofluidos. Por ejemplo, obtener nanofluidos con alta estabilidad es un reto prioritario en este tipo de sistemas. También garantizar que las nanopartículas no obstruyan las tuberías ni provoquen caídas de presión. En esta Tesis Doctoral se ha investigado por primera vez el uso de nanofluidos basados en dicalcogenuros de metales de transición como fluido caloportador en centrales solares. En concreto, se han investigado nanofluidos basados en nanoestructuras unidimensionales, bidimensionales y tridimensionales de MoS2, WS2 y WSe2. El fluido base utilizado en la preparación de estos nanofluidos es la mezcla eutéctica de bifenilo y óxido de difenilo empleada habitualmente como fluido de transferencia de calor en las centrales de concentración de energía solar. Se han explorado principalmente dos métodos de preparación: el método de exfoliación en fase líquida y la síntesis solvotermal del nanomaterial y su posterior dispersión en el aceite térmico mediante ultrasonidos. También se han analizado parámetros experimentales como la concentración de surfactante, el tiempo y la frecuencia de sonicación para la preparación de los nanofluidos. Los nanofluidos han sido sometidos a una extensa caracterización que incluye el estudio de la estabilidad coloidal a lo largo del tiempo, la caracterización de propiedades térmicas como el calor específico isobárico o la conductividad térmica, propiedades reológicas y propiedades ópticas. Los resultados han revelado que los nanofluidos basados en nanoestructuras 1D y 2D de dicalcogenuros de metales de transición son coloidalmente estables en el tiempo y presentan propiedades térmicas mejoradas en comparación con el fluido térmico típico utilizado en las centrales solares. Los nanofluidos más prometedores son los basados en nanoláminas de MoS2 y los basados en nanoláminas de WSe2, con mejoras del coeficiente de transferencia térmica del 36,2% y el 34,1%, respectivamente, con respecto al aceite térmico. Además, el espectacular papel de las nanoláminas de WSe2 en la mejora de la extinción óptica del aceite térmico sugiere el uso de estos nanofluidos en colectores solares de absorción directa. En conclusión, el presente trabajo demuestra la viabilidad del uso de nanofluidos basados en nanoestructuras de dicalcogenuros de metales de transición como fluidos de transferencia de calor en centrales solares de concentración basadas en colectores cilindro-parabólicos.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Improving the efficiency of the concentrating solar power plants using heat transfer nanofluids with gold nanoplates: An analysis from laboratory to industrial scale

  • Carrillo Berdugo, Iván
  • Sampalo Guzmán, Javier
  • Gallardo Bernal, Juan Jesús
  • Domínguez-Núñez, Alejandro
  • Aguilar Sánchez, María Teresa
  • Martínez Merino, Paloma
  • Navas Pineda, Francisco Javier
We report about the remarkable changes in the thermophysical properties of the heat transfer fluid used in concentrating solar power plants with parabolic-trough collectors (Dowtherm A, a mixture of diphenyl oxide and biphenyl) by addition of Au nanoplates in mass fractions around 10−2 wt%. The resulting nanofluids are stable for weeks, and their enhanced physical properties make them good candidates for the application. Particularly, with 4.8·10−2 wt% of Au nanoplates, specific heat increases by 12.0 ± 1.2 % at 523 K and thermal conductivity increases by 24.9 ± 6.1 % at 373 K, with no measurable changes in density or dynamic viscosity. This set of physical properties allows to make a realistic estimation of the performance of a prototypical concentrating solar power plant using these nanofluids for solar-to-thermal energy conversion. We determine, using computational cost-free numerical models available in literature, that the performance of a concentrating solar power plant could increase up to 35.1 %, compared to the predicted 24.7 % with the conventional heat transfer fluid, with neither rheological penalties nor economically prohibitive structural changes. The findings here reported may contribute to encourage the application of heat transfer nanofluids in order to improve the efficiency of concentrating solar power plants, and to consolidate a working scheme that positively promotes the transition from laboratory scale to industrial scale. © 2023 The Authors
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

WSe2 nanosheets synthesized by a solvothermal process as advanced nanofluids for thermal solar energy

  • Martínez Merino, Paloma
  • Sani, Elisa
  • Mercatelli, Luca
  • Alcántara Puerto, Rodrigo
  • Navas Pineda, Francisco Javier
Nanofluids are colloidal systems based on the suspension of nanoparticles in a fluid. Their thermal properties mean that they are promising heat transfer fluids with possible applications in different fields, concentrating solar energy being one of particular interest. Thus, this study presents the preparation of nanofluids based on WSe2 nanoparticles suspended in the eutectic mixture of biphenyl and diphenyl oxide, which is a heat transfer fluid widely used in concentrating solar power plants. To this end, solvothermal synthesis was used to prepare WSe2 nanosheets, which were characterized by means of scanning transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and Raman spectroscopy. The physical and chemical stability of the nanofluids was analyzed, observing that they became more stable when Triton X-100 was used as the surfactant. The presence of WSe2 nanosheets did not result in a significant increase in density or viscosity, but, by contrast, improvements were obtained in their isobaric specific heat and thermal conductivity, up to 4.7 and 64%, respectively. Spectral optical properties were investigated as well, showing a significant effect of the WSe2 nanosheet addition to the extinction coefficient of the base fluid in the wavelength range of the solar spectrum, promising for direct absorption solar collectors. Finally, the efficiency of the nanofluids was analyzed in a solar collector considering the Ur parameter, obtaining a remarkable increase in the efficiency of up to 34% with respect to the pure heat transfer fluid. This proves the possibility to obtain a sustainable production of energy from the sun using these WSe2-based nanofluids.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

NiO nanowire-containing heat transfer nanofluids for CSP plants: Experiments and simulations to promote their application

  • Santos Martínez, Deseada María de los
  • Carrillo Berdugo, Iván
  • Domínguez-Núñez, Alejandro
  • Poce Fatou, Juan Antonio
  • Zorrilla Cuenca, David
  • Navas Pineda, Francisco Javier
Concentrating solar power (CSP) is considered a clean, renewable and sustainable energy with a significant potential to become an alternative to polluting fossil fuel-based technologies. Among CSP collectors, parabolic-trough collectors (PTC) are the most mature technology, representing nearly 90% of the currently installed collectors in CSP plants worldwide. In this technology, a heat transfer fluid (HTF) carries the thermal energy absorbed to a power block to produce electricity. Improving the thermal properties of the conventional HTF could lead to an improvement of the efficiency of CSP plants. In this sense, the use of nanofluids as the HTF in these plants can be a promising choice. Here, polycrystalline NiO nanowirecontaining nanofluids have been prepared using the conventional HTF used in CSP plants as the base fluid; that is, the eutectic and azeotropic mixture of biphenyl (26.5%) and diphenyl oxide (73.5%). The stability, rheological and thermal properties have been characterized, and an analysis of the performance of the nanofluids prepared in standard and volumetric absorbers have been carried out. The overall CSP system performance can be increased up to 34.8% using the nanofluid in a surface collector or up to 34.3% using the nanofluid in a volumetric collector, which are better than the predicted 28.5% using the conventional HTF in a standard surface collector, thanks to the improvements in thermal properties, both specific heat and thermal conductivity. Finally, from molecular dynamics simulations we determined that the mean free path of thermal vibrations is longer for monocrystalline NiO nanowires. Thus, the development of strategies for obtaining this kind of nanostructures is of great interest because they can further improve the efficiency of these nanofluids.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Novel WS2-based nanofluids for concentrating solar power: performance characterization and molecular-level insights

  • Martínez Merino, Paloma
  • Midgley, Scott
  • Martín, Elisa I.
  • Estellé, Patrice
  • Alcántara Puerto, Rodrigo
  • Sánchez Coronilla, Antonio
  • Grau Crespo, Ricardo
  • Navas Pineda, Francisco Javier
Nano-colloidal suspensions of nanomaterials in a fluid, nanofluids, are appealing because of their interesting properties related to heat transfer processes. While nanomaterials based on transition metal chalcogenides (TMCs) have been widely studied in catalysis, sensing, and energy storage applications, there are few studies of nanofluids based on TMCs for heat transfer applications. In this study, the preparation and analysis of nanofluids based on 2D-WS2 in a typical heat transfer fluid (HTF) used in concentrating solar power (CSP) plants are reported. Nanofluids prepared using an exfoliation process exhibited well-defined nanosheets and were highly stable. The nanofluids were characterized in terms of properties related to their application in CSP. The presence of WS2 nanosheets did not modify significantly the surface tension, the viscosity, or the isobaric specific heat, but the thermal conductivity was improved by up to 30%. The Ur factor, which characterizes the thermal efficiency of the fluid in the solar collector, shows an enhancement of up to 22% in the nanofluid, demonstrating great promise for CSP applications. The Reynolds number and friction factor of the fluid were not significantly modified by the addition of the nanomaterial to the HTF, which is also positive for practical applications in CSP plants. Ab initio molecular dynamics simulations of the nanoparticle/fluid interface showed an irreversible dissociative adsorption of diphenyl oxide molecules on the WS2 edge, with very low kinetic barrier. The resulting “decoration” of the WS2 edge dramatically affects the nature of the interface interactions and is therefore expected to affect significantly the rheological and transport properties of the nanofluids.