Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Optical and transport properties of metal-oil nanofluids for thermal solar industry: experimental characterisation, performance assessment and molecular dynamics insights

  • Carrillo Berdugo, Iván
  • Estellé, Patrice
  • Sani, Elisa
  • Mercatelli, Luca
  • Grau Crespo, Ricardo
  • Zorrilla Cuenca, David
  • Navas Pineda, Francisco Javier
Concentrating solar power (CSP) technology can become a very valuable contributor to the transformation and decarbonization of our energy landscape, but for this technology to overcome the barrier toward market deployment, significant enhancements in the solar-to-thermal-to-electric energy conversión efficiency are needed. Here, an in-depth experimental analysis of the optical and transport properties of Pd-containing aromatic oil-based nanofluids is presented, with promising results for their prospective use as volumetric absorbers and heat transfer fluids in next-generation parabolic-trough CSP plants. A 0.030 wt % concentration of Pd nanoplates increases sunlight extinction by 90% after 20 mm propagation length and thermal conductivity by 23.5% at 373 K, which is enough to increase the overall system efficiency up to 45.3% and to reduce pumping requirements by 20%, with minimum increases in the collector length. In addition to that, molecular dynamics simulations are used to gain atomistic-level insights about the heat and momentum transfer in these nanofluids, with a focus on the role played by the solid−liquid interface in these phenomena. Molecules chemisorbed at the interface behave as a shelter-like boundary that hinders heat conduction, as a high thermal resistance path, and minimizes the impact of the solid on dynamic viscosity, as it weakens the interactions between the nanoplate and the surrounding nonadsorbed fluid molecules.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

WSe2 nanowires-based nanofluids for concentrating solar power

  • Navas, Javier
  • Martínez Merino, Paloma
  • Alcántara Puerto, Rodrigo
  • Navas Pineda, Francisco Javier
10.1016/j.mtchem.2022.101323, Tungsten selenide belongs to the family of inorganic compounds denominated transition metal dichal- cogenides (TMDCs). There is emerging interest in these compounds in the field of optoelectronics, catalysis, sensing or energy storage, among others. Most works focus on the use of these materials in their 2D form but there is scarce research on the study of TMDCs nanomaterials with one-dimensional morphology. In this work, we explore the thermophysical properties of nanofluids based on 1D-WSe2 nanostructures with the aim of studying the feasibility of these nanofluids as heat transfer fluids in concentrating solar power plants. In this respect, nanofluids with a high heat transfer rate could increase the thermal efficiency of solar power plants, which would reduce the energy dependence on fossil fuels. Nanofluids of 0.02 wt%, 0.05 wt% and 0.10 wt% WSe2 concentrations have been prepared by the two-step method considering a thermal fluid used in solar power plants as the base fluid. The results of extinction coefficient evolution, z potential and particle size in suspension show a high colloidal stability over time of the prepared nano fluids mainly because of the high aspect ratio of the 1D-WSe2 nanomaterial. Additionally, the one-dimensionality and length of the synthesized nanowires favors the transport of heat in controlled directions, obtaining increases in thermal conductivity with respect to the base fluid of up to 16.8% in the highest concentration nanofluid. Improvements in isobaric specific heat of up to 15.7% and heat transfer of up to 20.8% compared to the base fluid have also been found. The results of this paper provide evidence that the presence of WSe2 nanowires induces increases in the thermal properties of the fluid commonly used in concentrating solar power plants without inducing agglomeration or sedimentation problems. Therefore, the nanofluids based on 1D-WSe2 nanostructures prepared in this work have a high potential to be used as heat transfer fluids in concentrating solar power plants based on parabolic trough collectors.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Thermal performance of nanofluids based on tungsten disulphide nanosheets as heat transfer fluids in parabolic trough solar collectors

  • Martínez Merino, Paloma
  • Estellé, Patrice
  • Alcántara Puerto, Rodrigo
  • Carrillo Berdugo, Iván
  • Navas Pineda, Francisco Javier
Nanofluids are considered as a new generation of heat transfer fluids since they exhibit thermophysical properties improvements compared with conventional heat transfer fluids. The high thermal conductivity of nano -fluids and even the isobaric specific heat enhancements over conventional liquids make these colloidal suspensions very attractive in many research areas, including solar energy. In this work, nanofluids based on tungsten disulphide (WS2) nanosheets have been prepared from the thermal oil currently used as heat transfer fluid in Concentrating Solar Power (CSP) plants. The high aspect ratio of WS2 bidimensional nanostructures provides high long-term colloidal stability to the nanofluids and facilitates heat transport. Cetyl-trimethylammonium bromide and polyethylene glycol have been used as surfactants to improve the exfoliation process and enhance the colloidal stability of the nanomaterial dispersions. Some properties such as density and viscosity of the base fluid have not been significantly altered by the presence of WS2 nanosheets in the base fluid. However, studies on the thermal properties of nanofluids have shown promising results with increases in thermal conductivity of up to 33% and heat transfer coefficient by 21% over the base fluid. Furthermore, it has been estimated that the overall efficiency of the CSP system could be improved by 31% by replacing the conventional thermal fluid with 2D-WS2-based nanofluids.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Tesis doctoral (DoctoralThesis)

Development of 2d metallic nanomaterials for nanofluids with application in concentrating solar power, Desarrollo de nanomateriales 2d metálicos para nanofluidos con aplicación en energía solar de concentración

  • Carrillo Berdugo, Iván
The cost-effective optimisation of renewable power generation systems is a must in the present context of a global climate crisis and a growing demand for reliable, affordable and clean power supply. Reliability is a challenging issue for renewable technologies like photovoltaics, which produces electricity under ceaseless solar irradiation and therefore suffers of daily intermittency. The integration of concentrated solar power plants in hybrid power blocks has been proposed as a solution for this intermittency by taking advantage of thermal energy storage to maintain production and compensate the supply. A limitation for this solution is the low solar-to-thermal energy conversion due to the poor thermophysical properties of the typical heat transfer fluid flowing through solar collectors. The use of nanofluids as has been proposed to improve this conversion. This thesis aims to provide knowledge and understanding of the Physical Chemistry of nanofluids, with particular attention to features and processes that determine their stability and heat transfer and storage capabilities. Here Pd nanoplate-containing aromatic oil-based nanofluids have been prepared and characterised through different techniques to assess their applicability as volumetric absorbers and heat transfer fluids in parabolic trough collectors of concentrating solar power plants. A significant contribution from this thesis refers to the influence of the structure and dynamics of solid-liquid interfaces on the physical properties of nanofluids on the basis of simulations at the density functional theory and molecular dynamics levels-of-theory. The findings presented are expected to have both practical and fundamental implications on future research., La optimización del rendimiento de los sistemas de producción eléctrica renovable es una necesidad en el contexto actual, caracterizado por una crisis climática global y una creciente demanda por un suministro eléctrico fiable, rentable y limpio. La fiabilidad es un tema desafiante para algunas tecnologías renovables como la fotovoltaica, que producen electricidad únicamente bajo irradiación solar incesante y sufre, por tanto, de intermitencia diaria. La inclusión de plantas de energía solar de concentración en bloques híbridos de potencia constituye una prometedora solución para esta intermitencia, por aprovechamiento del almacenamiento térmico de energía para mantener la producción y compensar el suministro. Una limitación de esta solución es la baja eficiencia de la conversión solar-térmica por las deficientes propiedades termofísicas del fluido de transferencia de calor que circula a través de los colectores solares. Se propone el uso de nanofluidos para mejorar la eficiencia de conversión. Esta tesis pretende aportar conocimiento y comprensión sobre la Química Física de los nanofluidos, con particular atención a todos aquellos aspectos y procesos que determinan su estabilidad y aptitud para la transferencia y almacenamiento de calor. Se han preparado nanofluidos con nanoplates de Pd en un aceite aromático y se han caracterizado mediante diferentes técnicas para evaluar su aplicabilidad como absorbedores volumétricos y fluidos transferentes de calor en colectores cilindro-parabólicos de plantas de energía solar de concentración. Una contribución significativa de esta tesis se refiere a la influencia de la estructura y dinámica de la interfase sólido-líquido en las propiedades físicas de los nanofluidos, en base a simulaciones desarrolladas en el contexto de la Teoría del Funcional de la Densidad y de la Dinámica Molecular. Se espera que los hallazgos que aquí se presentan tengan implicaciones prácticas y fundamentales en investigaciones futuras.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Thermal Energy Storage in Concrete by Encapsulation of a Nano-Additivated Phase Change Material in Lightweight Aggregates

  • Carrillo Berdugo, Iván
  • Gallardo Bernal, Juan Jesús
  • Ruiz Marín, Nazaret
  • Guillén Domínguez, Violeta
  • Alcántara Puerto, Rodrigo
  • Navas Pineda, Francisco Javier
  • Poce Fatou, Juan Antonio
This work discusses the applicability of lightweight aggregate-encapsulated n-octadecane with 1.0 wt.% of Cu nanoparticles, for enhanced thermal comfort in buildings by providing thermal energy storage functionality to no-fines concrete. A straightforward two-step procedure (impregnation and occlusion) for the encapsulation of the nano-additivated phase change material in lightweight aggregates is presented. Encapsulation efficiencies of 30–40% are achieved. Phase change behavior is consistent across cycles. Cu nanoparticles provide nucleation points for phase change and increase the rate of progression of phase change fronts due to the enhancement in the effective thermal conductivity of n-octadecane. The effective thermal conductivity of the composites remains like that of regular lightweight aggregates and can still fulfil thermal insulation requirements. The thermal response of no-fines concrete blocks prepared with these new aggregates is also studied. Under artificial sunlight, with a standard 1000 W·m−2 irradiance and AM1.5G filter, concrete samples with the epoxy-coated aggregate-encapsulated n-octadecane-based dispersion of Cu nanoparticles (with a phase change material content below 8% of the total concrete mass) can effectively maintain a significant 5 °C difference between irradiated and non-irradiated sides of the block for ca. 30 min.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

MoS2-based nanofluids as heat transfer fluid in parabolic trough collector technology

  • Martínez Merino, Paloma
  • Alcántara Puerto, Rodrigo
  • G omez-Larrán, Pedro
  • Carrillo Berdugo, Iván
  • Navas Pineda, Francisco Javier
Concentrating solar power is becoming one of options for producing energy to replace conventional polluting energy sources. However, improving the efficiency and reducing the cost of technologies based on this type of energy to make it more competitive is still a work in progress. This study proposes replacing the thermal oil used as the heat transfer fluid in the absorber tubes of parabolic trough solar collectors (PTCs) with nanofluids based on spherical molybdenum disulphide nanoparticles with the aim of improving the thermal efficiency of concentrating solar power plants. The colloidal stability of the nanofluids was verified by UltravioleteVisible spectroscopy, Zeta potential and Dynamic Light Scattering monitoring. The presence of spherical MoS2 nanoparticles resulted in an increase of up to 13% in specific isobaric heat and 6% in thermal conductivity compared to thermal oil. Finally, the efficiency of parabolic trough solar collectors was estimated to increase by 5%, which also favours the decrease of pumping power and the elimination of selective coatings on the absorber tube. To our knowledge, this is the first time that MoS2-based nanofluids are tested as heat transfer fluids in PTCs analysing its implementation in the solar energy application. © 2022 The Authors. Published by Elsevier Ltd. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)., We acknowledge Ministerio de Ciencia, Innovaci?n y Universidades del Gobierno de Espa?a for funding under Grant No. RTI2018-096393-B-I00 and for financial support related to measurements of thermal properties, which were performed using devices acquired under Grant No. UNCA15-CE-2945. Also, this research was funded by 2014?2020 ERDF Operational Programme and by the Department of Economy, Knowledge, Business and University of the Regional Government of Andalusia, grant number FEDER-UCA18-107510.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Interface chemistry effects in nanofluids: Experimental and computational study of oil-based nanofluids with gold nanoplates

  • Carrillo Berdugo, Iván
  • Sampalo Guzmán, Javier
  • Grau Crespo, Ricardo
  • Zorrilla Cuenca, David
  • Navas Pineda, Francisco Javier
The chemistry of interfaces and its relation with energy storage at and transport through solid-liquid interfaces in heat transfer nanofluids is a very unexplored terrain. Here we discuss how the magnitude of the changes in specific heat and thermal conductivity of the base fluid, upon dispersion of a nanoma-terial, depends on the surface chemistry of that nanomaterial. We focus on nanofluids with Au nanoplates from an integrated experimental and theoretical perspective, and compared our findings with those pre-viously reported for nanofluids with Pd nanoplates in the same base fluid. Pd and Au are known to have different surface chemistry, and so are the structures of the solid-liquid interfaces and the thermal prop-erties of these nanofluids. It was experimentally found that for mass fractions in the order of 0.01 wt%, Pd and Au nanoplates provide enhancements of 5.9% and 1.6% in specific heat, and enhancements of 12.5% and 17.9% in thermal conductivity, at 373 K. It was verified using density functional theory and classical molecular dynamics simulations that base fluid molecules can chemisorb on Pd surfaces, but not on Au surfaces. This work suggests that the stronger interactions between species at solid-liquid interfaces, the higher the specific heat enhancements and the lower the thermal conductivity enhancements at high temperature.(c) 2022 The Author(s). Published by Elsevier B.V.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Multifunctional microcapsules based on ZnO and n-octadecane: From thermal energy storage to photocatalytic activity

  • Sánchez Fernández, Javier
  • Aguilar Sánchez, María Teresa
  • Carrillo Berdugo, Iván
  • Gallardo Bernal, Juan Jesús
  • Navas Pineda, Francisco Javier
Energy management is one of the most important issues to be addressed in the near future in many fields, one of which is buildings. In this sense, new phase change materials (PCM) are being widely studied for storing energy. Encapsulating PCM is a good way to incorporate these materials into different applications in which energy storage is useful. In this study, microcapsules based on ZnO containing n-octadecane as a phase change material were synthesized and characterized with regard to their structural, morphological and optical properties according to several synthesis parameters, such as the proportion of precursors, stirring rate and ageing time. The microcapsules were characterized using x-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy, and UV–Vis spectroscopy in diffuse reflectance mode. The presence of n-octadecane inside the capsules was confirmed. Their thermal behaviour was analysed by means of differential scanning calorimetry. Heating/cooling cycles were performed, after which the microcapsules presented good stability. Furthermore, the encapsulation efficiency was estimated from melting and crystallization enthalpy values, reaching a value of 23.1%. Moreover, the isobaric specific heat of the microcapsules is higher than that of ZnO, which means that substituting ZnO with microcapsules in buildings leads to an important increase in the amount of sensible heat stored. Finally, the photocatalytic activity of the microcapsules was analysed by studying the photodegradation of Crystal Violet dye. The degradation rate increased when the microcapsules were present, so the photocatalytic activity of the microcapsules was confirmed under UV and visible irradiation, which is of interest because they can be used to remove organic pollutants from buildings., 10 páginas
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Improving the efficiency of the concentrating solar power plants using heat transfer nanofluids with gold nanoplates: An analysis from laboratory to industrial scale

  • Carrillo Berdugo, Iván
  • Sampalo Guzmán, Javier
  • Gallardo Bernal, Juan Jesús
  • Domínguez-Núñez, Alejandro
  • Aguilar Sánchez, María Teresa
  • Martínez Merino, Paloma
  • Navas Pineda, Francisco Javier
We report about the remarkable changes in the thermophysical properties of the heat transfer fluid used in concentrating solar power plants with parabolic-trough collectors (Dowtherm A, a mixture of diphenyl oxide and biphenyl) by addition of Au nanoplates in mass fractions around 10−2 wt%. The resulting nanofluids are stable for weeks, and their enhanced physical properties make them good candidates for the application. Particularly, with 4.8·10−2 wt% of Au nanoplates, specific heat increases by 12.0 ± 1.2 % at 523 K and thermal conductivity increases by 24.9 ± 6.1 % at 373 K, with no measurable changes in density or dynamic viscosity. This set of physical properties allows to make a realistic estimation of the performance of a prototypical concentrating solar power plant using these nanofluids for solar-to-thermal energy conversion. We determine, using computational cost-free numerical models available in literature, that the performance of a concentrating solar power plant could increase up to 35.1 %, compared to the predicted 24.7 % with the conventional heat transfer fluid, with neither rheological penalties nor economically prohibitive structural changes. The findings here reported may contribute to encourage the application of heat transfer nanofluids in order to improve the efficiency of concentrating solar power plants, and to consolidate a working scheme that positively promotes the transition from laboratory scale to industrial scale. © 2023 The Authors
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

WSe2 nanosheets synthesized by a solvothermal process as advanced nanofluids for thermal solar energy

  • Martínez Merino, Paloma
  • Sani, Elisa
  • Mercatelli, Luca
  • Alcántara Puerto, Rodrigo
  • Navas Pineda, Francisco Javier
Nanofluids are colloidal systems based on the suspension of nanoparticles in a fluid. Their thermal properties mean that they are promising heat transfer fluids with possible applications in different fields, concentrating solar energy being one of particular interest. Thus, this study presents the preparation of nanofluids based on WSe2 nanoparticles suspended in the eutectic mixture of biphenyl and diphenyl oxide, which is a heat transfer fluid widely used in concentrating solar power plants. To this end, solvothermal synthesis was used to prepare WSe2 nanosheets, which were characterized by means of scanning transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and Raman spectroscopy. The physical and chemical stability of the nanofluids was analyzed, observing that they became more stable when Triton X-100 was used as the surfactant. The presence of WSe2 nanosheets did not result in a significant increase in density or viscosity, but, by contrast, improvements were obtained in their isobaric specific heat and thermal conductivity, up to 4.7 and 64%, respectively. Spectral optical properties were investigated as well, showing a significant effect of the WSe2 nanosheet addition to the extinction coefficient of the base fluid in the wavelength range of the solar spectrum, promising for direct absorption solar collectors. Finally, the efficiency of the nanofluids was analyzed in a solar collector considering the Ur parameter, obtaining a remarkable increase in the efficiency of up to 34% with respect to the pure heat transfer fluid. This proves the possibility to obtain a sustainable production of energy from the sun using these WSe2-based nanofluids.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

NiO nanowire-containing heat transfer nanofluids for CSP plants: Experiments and simulations to promote their application

  • Santos Martínez, Deseada María de los
  • Carrillo Berdugo, Iván
  • Domínguez-Núñez, Alejandro
  • Poce Fatou, Juan Antonio
  • Zorrilla Cuenca, David
  • Navas Pineda, Francisco Javier
Concentrating solar power (CSP) is considered a clean, renewable and sustainable energy with a significant potential to become an alternative to polluting fossil fuel-based technologies. Among CSP collectors, parabolic-trough collectors (PTC) are the most mature technology, representing nearly 90% of the currently installed collectors in CSP plants worldwide. In this technology, a heat transfer fluid (HTF) carries the thermal energy absorbed to a power block to produce electricity. Improving the thermal properties of the conventional HTF could lead to an improvement of the efficiency of CSP plants. In this sense, the use of nanofluids as the HTF in these plants can be a promising choice. Here, polycrystalline NiO nanowirecontaining nanofluids have been prepared using the conventional HTF used in CSP plants as the base fluid; that is, the eutectic and azeotropic mixture of biphenyl (26.5%) and diphenyl oxide (73.5%). The stability, rheological and thermal properties have been characterized, and an analysis of the performance of the nanofluids prepared in standard and volumetric absorbers have been carried out. The overall CSP system performance can be increased up to 34.8% using the nanofluid in a surface collector or up to 34.3% using the nanofluid in a volumetric collector, which are better than the predicted 28.5% using the conventional HTF in a standard surface collector, thanks to the improvements in thermal properties, both specific heat and thermal conductivity. Finally, from molecular dynamics simulations we determined that the mean free path of thermal vibrations is longer for monocrystalline NiO nanowires. Thus, the development of strategies for obtaining this kind of nanostructures is of great interest because they can further improve the efficiency of these nanofluids.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Novel WS2-based nanofluids for concentrating solar power: performance characterization and molecular-level insights

  • Martínez Merino, Paloma
  • Midgley, Scott
  • Martín, Elisa I.
  • Estellé, Patrice
  • Alcántara Puerto, Rodrigo
  • Sánchez Coronilla, Antonio
  • Grau Crespo, Ricardo
  • Navas Pineda, Francisco Javier
Nano-colloidal suspensions of nanomaterials in a fluid, nanofluids, are appealing because of their interesting properties related to heat transfer processes. While nanomaterials based on transition metal chalcogenides (TMCs) have been widely studied in catalysis, sensing, and energy storage applications, there are few studies of nanofluids based on TMCs for heat transfer applications. In this study, the preparation and analysis of nanofluids based on 2D-WS2 in a typical heat transfer fluid (HTF) used in concentrating solar power (CSP) plants are reported. Nanofluids prepared using an exfoliation process exhibited well-defined nanosheets and were highly stable. The nanofluids were characterized in terms of properties related to their application in CSP. The presence of WS2 nanosheets did not modify significantly the surface tension, the viscosity, or the isobaric specific heat, but the thermal conductivity was improved by up to 30%. The Ur factor, which characterizes the thermal efficiency of the fluid in the solar collector, shows an enhancement of up to 22% in the nanofluid, demonstrating great promise for CSP applications. The Reynolds number and friction factor of the fluid were not significantly modified by the addition of the nanomaterial to the HTF, which is also positive for practical applications in CSP plants. Ab initio molecular dynamics simulations of the nanoparticle/fluid interface showed an irreversible dissociative adsorption of diphenyl oxide molecules on the WS2 edge, with very low kinetic barrier. The resulting “decoration” of the WS2 edge dramatically affects the nature of the interface interactions and is therefore expected to affect significantly the rheological and transport properties of the nanofluids.