Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Sustainable product design by large format additive manufacturing of cork composites

  • Burgos Pintos, Pedro
  • Marzo Gago, Patricia
  • Fernández Delgado, Natalia
  • Herrera Collado, Miriam
  • Sanz de León, Alberto
  • Molina Rubio, Sergio Ignacio
In this study, a series of Acrylate-Styrene-Acrylonitrile (ASA) composites loaded with high amounts of cork agro-waste (10–30 wt.%) are developed to address the increasing demand from industry and society for more sustainable materials, with the aim of reducing the carbon footprint associated with fossil fuel-derived plastics. These materials are suitable for Material Extrusion (ME) technologies, including Large Format Additive Manufacturing (LFAM). We demonstrate that the printing conditions can be optimised to manufacture cork composites with good mechanical properties, even for large particle sizes, around 1 mm. Sustainability analysis of these composites revealed that the carbon footprint can be reduced by up to 25% for composites with 30 wt.% cork, primarily due to the reduction in ASA usage. These composites were used to print a luminaire utilising a biomimetic approach and parametric design, showcasing how new materials and innovative product design can be integrated to produce functional and sustainable prototypes.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Computational Investigation of the Structural Properties of Poly(lactic acid) and Its Stereoisomers: Shape, Size, and Flexibility

  • Bacova, Petra
  • Harmandaris, Vagelis
  • Molina Rubio, Sergio Ignacio
In an effort to support the common cause of making the polymer industry more sustainable, studies involving computational methods have been enriched with polymers of natural origin. Owing to their complex structure often resembling proteins more than synthetic polymers, simulation studies of biobased polymers are very challenging. In this work, we present an atomistic study of poly(lactic acid) and its stereoisomers of multiple molecular weights in the melt. We show that while the L- and D-stereoisomers exhibit similar global structural properties, copolymer chains consist of more compact and more spherical domains than their homopolymer analogues. We investigate the local folding in these structures by examining intramolecular hydrogen bonding, packing length, and the geometrical parameters characterizing the n−π* interaction. This work provides a detailed description of the inner structure of this biodegradable polymer over various molecular weights and reveals its structural similarities with synthetic and biopolymer materials.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

One-pot depolymerization-repolymerization of PET waste into sustainable photocurable liquid copolyesters for high-performance additive manufacturing

  • Carmenini, Rosario
  • Sanz de León, Alberto Darío
  • Benelli, Tiziana
  • Giorgini, Loris
  • Comes Franchini, Mauro
  • Molina Rubio, Sergio Ignacio
  • Maturi, Mirko
In this work, we present a sustainable one-pot two-step approach for the depolymerization and repolymerization of post-consumer poly(ethylene terephthalate) (PET) into high-performance photocurable liquid polyesters suitable for vat photopolymerization (VP) additive manufacturing. By coupling PET waste alcoholysis with biobased diols and polytransesterification with dimethyl itaconate (DMI), novel poly(diyl itaconate-co-terephthalate) copolyesters were synthesized under solvent-free conditions using dibutyltin dilaurate as a catalyst. The resulting polyesters were formulated with reactive diluents and photoinitiators to yield printable resins with up to 22 wt% recycled PET. Mechanical and thermal analysis of 3D printed parts revealed that the incorporation of PET-derived aromatic structures enhanced stiffness, strength, and thermal stability, while the presence of itaconate units enabled high crosslink density and tunable flexibility. The optimal formulation, containing 75 wt% photocurable polyester containing 15.3% recycled PET, achieved a Young’s modulus of 1.4 GPa and flexural strength of 54 MPa, representing the highest performance reported to date for itaconic acid-based 3D printable resins. This integrated approach represents a significant green advance by combining solvent-free processing, renewable feedstocks, and post-consumer PET valorisation. The sustainability of the materials was further validated using the Sustainable Formulation Score (SFS), placing the top-performing resins in the top 10% of benchmarked systems.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Plasmonic Characterization of 3D Printable Metal-Polymer Nanocomposites

  • Mata Fernández, María de la
  • Sanz de León, Alberto
  • Valencia Liñán, Luisa María
  • Molina Rubio, Sergio Ignacio
Plasmonic polymer nanocomposites (i.e., polymer matrices containing plasmonic nanostructures) are appealing candidates for the development of manifold technological devices relying on light-matter interactions, provided that they have inherent properties and processing capabilities. The smart development of plasmonic nanocomposites requires in-depth optical analyses proving the material performance, along with correlative studies guiding the synthesis of tailored materials. Importantly, plasmon resonances emerging from metal nanoparticles affect the macroscopic optical response of the nanocomposite, leading to far- and near-field perturbations useful to address the optical activity of the material. We analyze the plasmonic behavior of two nanocomposites suitable for 3D printing, based on acrylic resin matrices loaded with Au or Ag nanoparticles. We compare experimental and computed UV-vis macroscopic spectra (far-field) with single-particle electron energy loss spectroscopy (EELS) analyses (near-field). We extended the calculations of Au and Ag plasmon-related resonances over different environments and nanoparticle sizes. Discrepancies between UV-vis and EELS are dependent on the interplay between the metal considered, the surrounding media, and the size of the nanoparticles. The study allows comparing in detail the plasmonic performance of Au- and Ag-polymer nanocomposites, whose plasmonic response is better addressed, accounting for their intended applications (i.e., whether they rely on far- or near-field interactions).
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Itaconic-Acid-Based Sustainable Poly(ester amide) Resin for Stereolithography

  • Vetri Buratti, Veronica
  • Sanz de León, Alberto
  • Maturi, Mirko
  • Sambri, Letizia
  • Molina Rubio, Sergio Ignacio
  • Comes Franchini, Mauro
Material science is recognized as a frontrunner in achieving a sustainable future, owing to its primary reliance upon petroleum-based chemical raw materials. Several efforts are made to implement common renewable feedstocks as an alternative to common fossil resources. For this purpose, additive manufacturing (AM) represents promising and effective know-how for the replacement of high energy- and resource-demanding processes with more environmentally friendly practices. This work presents a novel biobased ink for stereolithography, which has been formulated by mixing a photocurable poly(ester amide) (PEA) obtained from renewable resources with citrate and itaconate cross-linkers and appropriate photopolymerization initiators, terminators, and dyes. The mechanical features and the relative biocompatibility of 3D-printed objects have been carefully studied to evaluate the possible resin implementation in the field of the textile fashion industry., 9 páginas
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

3D-Printing of Highly Piezoelectric Barium Titanate Polymer Nanocomposites with Surface-Modified Nanoparticles at Low Loadings

  • Maturi, Mirko
  • Migliorini, Lorenzo
  • Villa, Sara Moon
  • Santaniello, Tommaso
  • Fernández Delgado, Natalia
  • Molina Rubio, Sergio Ignacio
  • Milani, Paolo
  • Sanz de León, Alberto
  • Comes Franchini, Mauro
This work describes the development and characterization of tetragonal barium titanate nanoparticles (BTO NPs) and their surface functionalization with dopamine dodecylamine (DDA), a lipophilic organic ligand. The so-obtained lipophilic NPs (BTO-DDA) are then formulated at low loadings (< 5 wt.%) into liquid photocurable resins for vat photopolymerization (VP) and 3D printed into solid objects. The printed composites are mechanically characterized in order to assess the effect of the nanomaterial on the mechanical properties of the 3D printed polymer, revealing no significant variations in the mechanical properties (tensile or flexural) of the nanocomposites compared to the original polymer matrix. In light of these results, the printed nanocomposites are studied in terms of their capacity to generate a separation of charge by the piezoelectric effect, typical of the BTO crystal structure. This study reveals that BTO-loaded nanocomposites display outstanding piezoelectric coefficients as high as 50 pC/N when BTO-DDA is formulated at 3.0 wt.%, only slightly less than one-third of the piezoelectric coefficient previously reported for bulk BTO, while preserving the mechanical properties of the polymer matrix.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Additive Manufacturing of Thermoplastic Polyurethane-Cork Composites for Material Extrusion Technologies

  • Alvarez Gómez, Mario
  • Moreno Nieto, Francisco Daniel
  • Moreno Sánchez, Daniel
  • Sanz de León, Alberto
  • Molina Rubio, Sergio Ignacio
Among the material extrusion technologies of additive manufacturing, fused granular fabrication is playing a bigger role in the industry. The increase in the size of printers demands extrusion systems with higher deposition rates that facilitate printing larger parts in shorter times with a need for cost reduction. This cost reduction in fused granular fabrication systems is due to the utilisation of pellets as the material source for the prints, such as pellets that are the most common way of distributing polymeric materials in industry and do not need the usual previous transformation into filaments. Most of the polymers in the industry can be found in the shape of pellets, so the opportunities for developing new materials beside the traditional filaments found in the market are expanding. In this research, a novel composite material has been developed based on the blending of commercial thermoplastic polyurethane (TPU) and cork particles obtained from industrial waste at different concentrations. These materials have been processed at a laboratory scale, and their mechanical, thermal and rheological properties have been studied. Despite a 53.52% reduction in the maximum stress on the x-axis, an 81.82% decrease in the values obtained with specimens oriented on the z-axis and a shortage in the deformation values, the results reveal a remarkable weight reduction leading to 21.31% when compared to the TPU of the blends,. These results may open a path to further explore these blends and find suitable applications in industry as proposed.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Influence of Cork Waste Processing in the Fabrication of Polymer Composites by Additive Manufacturing

  • Innocenti, Alessandro
  • Marzo Gago, Patricia
  • Burgos Pintos, Pedro
  • Mata Fernández, María de la
  • Sanz de León, Alberto
  • Molina Rubio, Sergio Ignacio
This work evaluates the influence of processing on the production of various cork composites. Cork agro-waste with different particle sizes, namely fine cork (FC, Dp < 250 µm) and coarse cork (CC, 1 mm < Dp < 2 mm), was valorized. It was possible to process composites containing up to 20 wt.% FC and 15 wt.% CC using a twin-screw extruder. These composites were subsequently manufactured via large-format additive manufacturing (LFAM) using fused granular fabrication (FGF). The effects of cork concentration and processing duration in the extruder on particle integration, as well as on the mechanical, physical, and thermal properties of the composites, were studied. As expected, a linear decrease in mechanical properties was observed with increasing cork content. For the same cork content and longer processing durations, properties were similar for FC and CC composites. Shorter processing durations in the extruder minimized degradation of FC. However, partial degradation occurred during FGF printing, leading to the formation of composite foams with increased porosity, lower density, and enhanced thermal insulation.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Design for additive manufacturing in the medical sector. Tools and cases

  • Moreno Nieto, Francisco Daniel
  • Hernández Saz, Jesús
  • Burgos Pintos, Pedro
  • Moreno Sanchez, Daniel
  • Galán Romero, Laura
  • Cano, Pablo Andrés
  • Molina Rubio, Sergio Ignacio
This work presents a review of the three main axes that constitute the knowledge base when designing products for additive manufacturing in the medical industry: technology, materials and design tools. Through four different study cases of diverse medical products that match the existing categories in the established classification of standards, different design approaches and strategies are presented and suggested as feasible solutions that generate medical products. These cases studies intend to cover some categories where additive manufacturing can be used in the medical sector: a post-surgery protection cast developed using reverse engineering technologies and free-form modelling tools customized not only regarding anatomic shapes but also in terms of aesthetics, a surgical simulator that improves the surgeon’s education process in a non-expensive manner, which could also be shared and spread combining soft and hard parts, a hip surgery retractor designed together with experts that increase the performance of the commercial solutions and a bone replacement implant with an innovative approach that combines engineering polymers with metallic surface coatings. All these case studies present the diversity of possible applications when working with the medical industry, as well as the required skills and knowledge needed to start with this task. Beside this, it has been stated the convenience of engineers to work hand by hand with medical professionals, combining skills and visions to innovate and improve the patient’s journey
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Multi-material stainless steel fabrication using plasma wire arc additive manufacturing

  • Segovia Guerrero, Luis
  • Baladés Ruiz, Nuria
  • Attard, Bonnie
  • De Nicolás, María
  • Scotti, Américo
  • Zammit, Ann
  • Sales Lérida, David
Layered stainless steel samples were manufactured using Plasma Wire Arc Additive Manufacturing by depositing alternating layers of two dissimilar stainless steels onto an AISI 316L substrate. The selected materials were the M430 ferritic and M316L austenitic stainless steels. Comprehensive microstructural characterization in different areas, including interfaces between the two different materials, was achieved through optical microscopy and electron backscatter diffraction. Results revealed good weldability among the two-layered steels and on the substrate. Also, a gradient duplex structure was observed mainly at the layer interfaces, suggesting a nuanced blending of properties in the deposited zone. To establish a direct correlation with mechanical properties in the observed structures, macro and micro-hardness tests were conducted along the cross-section. These tests evidenced the presence of a harder phase along the interface compared to the individual materials. The microstructural analysis corroborated the presence of mixing between phases in conjunction with some areas of delta ferrite.