Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Exciton delocalization, charge transfer, and electronic coupling for singlet excitation energy transfer between stacked nucleobases in DNA: An MS-CASPT2 study

  • Blancafort San José, Lluís
  • Voityuk, Alexander A.
Exciton delocalization and singlet excitation energy transfer have been systematically studied for the complete set of 16 DNA nucleobase dimers in their ideal, single-strand stacked B-DNA conformation, at the MS-CASPT2 level of theory. The extent of exciton delocalization in the two lowest (π,π*) states of the dimers is determined using the symmetrized one-electron transition density matrices between the ground and excited states, and the electronic coupling is calculated using the delocalization measure and the energy splitting between the states [see F. Plasser, A. J. A. Aquino, W. L. Hase, and H. Lischka, J. Phys. Chem. A 116, 11151-11160 (2012)]. The calculated couplings lie between 0.05 eV and 0.14 eV. In the B-DNA conformation, where the interchromophoric distance is 3.38 Å, our couplings deviate significantly from those calculated with the transition charges, showing the importance of orbital overlap components for the couplings in this conformation. The calculation of the couplings is based on a two-state model for exciton delocalization. However, in three stacks with a purine in the 5′ position and a pyrimidine in the 3′ one (AT, GC, and GT), there is an energetically favored charge transfer state that mixes with the two lowest excited states. In these dimers we have applied a three-state model that considers the two locally excited diabatic states and the charge transfer state. Using the delocalization and charge transfer descriptors, we obtain all couplings between these three states. Our results are important in the context of DNA photophysics, since the calculated couplings can be used to parametrize effective Hamiltonians to model extended DNA stacks. Our calculations also suggest that the 5′-purine-pyrimidine- 3′ sequence favors the formation of charge transfer excited state, This work was funded by the Spanish Ministerio de Economia y Competividad (MINECO) (CTQ2011-26573 and UNGI10-4E-801 from FEDER (European Fund for Regional Development)), and the Catalan Agencia de Gestio d'Ajuts Universitaris i de Recerca (SGR0528) and Direccio General de la Recerca (Xarxa de Referencia en Quimica Teorica i Computacional de Catalunya).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Distance dependence of triplet energy transfer in water and organic solvents: A QM/MD study

  • Curutchet, Carles
  • Voityuk, Alexander A.
The possibility to optimize optoelectronic devices, such as organic light-emitting diodes or solar cells, by exploiting the special characteristics of triplet electronic states and their migration ability is attracting increased attention. In this study, we analyze how an intervening solvent modifies the distance dependence of triplet electronic energy transfer (TEET) processes by combining molecular dynamics simulations with quantum chemical calculations of the transfer matrix elements using the Fragment Excitation Difference (FED) method. We determine the β parameter characterizing the exponential distance decay of TEET rates in a stacked perylene dimer in water, chloroform, and benzene solutions. Our results indicate that the solvent dependence of β (β vacuum = 5.14 Å -1 > β water = 3.77 Å -1 > β chloroform = 3.61 Å -1 > β benzene = 3.44 Å -1) can be rationalized adopting the McConnell model of superexchange, where smaller triplet energy differences between the donor and the solvent lead to smaller β constants. We also estimate the decay of hole transfer (HT) and excess electron transfer (EET) processes in the system using the Fragment Charge Difference (FCD) method and find that β TEET can be reasonably well approximated by the sum of β EET and β HT constants, C.C. acknowledges support from the Spanish Ministry of Economy and Competitivity through the Ramon y Cajal program (ref. RYC-2011-08918). A.A.V. acknowledges financial support from MICINN (Ministry of Science and Innovation, Spain) and the FEDER fund (European Fund for Regional Development) provided by grants CTQ2011-26573, UNGI08-4E-003, and UNGI10-4E-801
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Photochemistry and Photophysics at Extended Seams of Conical Intersection

  • Blancafort San José, Lluís
The role of extended seams of conical intersection in excited-state mechanisms is reviewed. Seams are crossings of the potential energy surface in many dimensions where the decay from the excited to the ground state can occur, and the extended seam is composed of different segments lying along a reaction coordinate. Every segment is associated with a different primary photoproduct, which gives rise to competing pathways. This idea is first illustrated for fulvene and ethylene, and then it is used to explain more complex cases such as the dependence of the isomerisation of retinal chromophore isomers on the protein environment, the dependence of the efficiency of the azobenzene photochemical switch on the wavelength of irradiation and the direction of the isomerisation, and the coexistence of different mechanisms in the photo-induced Wolff rearrangement of diazonaphthoquinone. The role of extended seams in the photophysics of the DNA nucleobases and the relationship between two-state seams and three-state crossings is also discussed. As an outlook, the design of optical control strategies based on the passage of the excited molecule through the seam is considered, and it is shown how the excited-state lifetime of fulvene can be modulated by shaping the energy of the seam, I thank my co-workers at the University of Girona for their efforts in recent years: Quansong Li, Sergi Ruiz-Barragan, David Asturiol, Annapaola Migani and Ferran Feixas. I also thank Mike Robb and Mike Bearpark (Imperial College London) for a long-term collaboration, where many ideas shown in this review have been developed, and Fabien Gatti (University of Montpellier) and Hans-Dieter Meyer (University of Heidelberg) for support in the use of the MCTDH program. Financial support has been provided by grants CTQ2011-26573 from the Spanish Ministerio de Economia y Competividad (MINECO), SGR0528 from the Catalan Agencia de Gestio d'Ajuts Universitaris i de Recerca (AGAUR), UNGI08-4E-003 and UNGI10-4E-801 from MINECO and the European Fund for Regional Development (FEDER), and the Xarxa de Referencia en Quimica Teorica i Computacional de Catalunya from AGAUR
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

On the performance of the Kohn-Sham orbital approach in the calculation of electron transfer parameters. the three state model

  • Butchosa Robles, Cristina
  • Simon i Rabasseda, Sílvia
  • Blancafort San José, Lluís
  • Voityuk, Alexander A.
We have tested the performance of the Kohn-Sham orbital approach to obtain the electronic coupling and the energetics for hole transfer (HT) in the guanine-indole pair, using a three-state model. The parameters are derived from the simple DFT calculations with 10 different functionals, and compared with benchmark MS-CASPT2 calculations. The guanine-indole pair is a simple model for HT in DNA-protein complexes, which has been postulated as a protection mechanism for DNA against oxidative damage. In this pair, the first excited state of the indole radical cation has low energy (less than 0.3 eV relative to the ground state of the cation), which requires the application of very accurate quantum chemical methods and the invocation of a 3-state model. The Kohn-Sham orbital approach has been tested on six π stacked and three T-shaped conformers. It has been shown to provide quite accurate results for all ten tested functionals, compared to the reference MS-CASPT2 values. The best performance has been found for the long-range corrected CAM-B3LYP functional. Our results suggest that the Kohn-Sham orbital method can be used to estimate the excited state properties of radical cation systems studied using transient spectroscopy. Because of its accuracy and its low computational cost, the approach allows one to calculate relatively large models and to account for the effects of conformational dynamics on HT between DNA and a protein environment, This work has been supported by grants CTQ2011-23441 and CTQ2011-26573 from the Spanish Ministerio de Economia y Competividad (MINECO), SGR0528 from the Catalan Agencia de Gestio d'Ajuts Universitaris i de Recerca (AGAUR), UNGI08-4E-003 and UNGI10-4E-801 from MINECO and the European Fund for Regional Development (FEDER), and the Xarxa de Referencia en Quimica Teorica i Computacional de Catalunya from AGAUR
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Early events in the photochemistry of 5-diazo Meldrum's acid, Formation of a product manifold in C-N bound and pre-dissociated intersection seam regions

  • Li, Huijing
  • Migani, Annapaola|||0000-0001-5422-805X
  • Blancafort, Lluís|||0000-0002-0003-5540
  • Li, Quansong
  • Li, Zesheng
5-Diazo Meldrum's acid (DMA) undergoes a photo-induced Wolff rearrangement (WR). Recent gas-phase experiments have identified three photochemical products formed in a sub-ps scale after irradiation, a carbene formed after nitrogen loss, a ketene formed after WR and a second carbene formed after nitrogen and CO elimination (A. Steinbacher, et al. Phys. Chem. Chem. Phys., 2014, 16, 7290-7298). In this work, ground- and excited-state potential energy surfaces (PESs) have been investigated at the MS-CASPT2// CASSCF level. The key element of the PESs is an extended S0/S1 conical intersection seam along the C-N dissociation coordinate. The C-N predissociated region of the seam is accessed after excitation to the bright S2 state, and decay paths from the seam to the three primary products have been characterized. For the ketene and carbene II products, we show two possible formation pathways, a direct and a stepwise one, which suggests that these products may be formed in a bi-modal fashion. We have also characterized two possible mechanisms for triplet formation, one occurring before C-N dissociation involving a (S1/T2/T1) crossing region, and another one through the carbene. In contrast, excitation to S1 leads to a C-N bound region of the seam from where DMA regeneration or diazirine formation is possible, with a preference for the first case. The results are in good agreement with experimental data. Together with our previous work on diazonaphthoquinone, they show the importance of an extended seam in the photochemistry of a-diazoketones.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

What Controls Photocatalytic Water Oxidation on Rutile TiO2(110) under Ultra-High-Vacuum Conditions?

  • Migani, Annapaola|||0000-0001-5422-805X
  • Blancafort, Lluís|||0000-0002-0003-5540
The photocatalytic O-H dissociation of water absorbed on a rutile TiO(110) surface in ultrahigh vacuum (UHV) is studied with spin-polarized density functional theory and a hybrid exchange-correlation functional (HSE06), treating the excited-state species as excitons with triplet multiplicity. This system is a model for the photocatalytic oxidation of water by TiO in an aqueous medium, which is relevant for the oxygen evolution reaction and photodegradation of organic pollutants. We provide a comprehensive mechanistic picture where the most representative paths correspond to excitonic configurations with the hole located on three- and two-coordinate surface oxygen atoms (O and O). Our picture explains the formation of the species observed experimentally. At near band gap excitation, the O path leads to the generation of hydroxyl anions which diffuse on the surface, without net oxidation. In contrast, free hydroxyl radicals are formed at supra band gap excitation (e.g., 266 nm) from an interfacial exciton that undergoes O-H dissociation. The oxidation efficiency is low because the path associated with the O exciton, which is the most favored one thermodynamically, is unreactive because of a high propensity for charge recombination. Our results are also relevant to understand the reactivity in the liquid phase. We assign the photoluminescence measured for atomically flat TiO(110) surfaces in an aqueous medium to the O exciton, in line with the proposal based on experiments, and we have identified a species derived from the O exciton with an activated O-Ti bond that may be relevant in photocatalytic applications in an aqueous medium.