Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 83
Encontrada(s) 1 página(s)

Docta Complutense
Publication Artículo científico (JournalArticle)

Supramolecular polymerization and bulk properties relationship in ester-functionalized N-annulated perylenediimides

  • López Gandul, Lucia
  • Lavarda, Giulia
  • van den Bersselaar, Bart W. L.
  • Vantomme, Ghislaine
  • Meijer, E. W.
  • Sánchez Martín, Luis
The synthesis of a series of N-annulated perylenediimides (NPDIs) 1–4 with an ester group and an alkyl spacer of different length in the peripheral chains was carried out, and the influence of the side chain architecture on the self-assembly, both in solution and in the solid state, was investigated. Solution studies evidenced that the carbonyl group plays a key role in the supramolecular organization of these derivatives, changing from an H-type isodesmic polymerization (4) to a J-type cooperative process as the spacer length decreases (1–3). On the other hand, bulk assays revealed an odd-even effect that correlates with the length of the alkyl spacer. Whereas the odd-spaced derivatives (2 and 4) organize in a disordered columnar hexagonal fashion, the even-spaced ones (1 and 3) show the formation of multiple crystalline (and liquid crystalline) structures. The results presented herein highlight the importance of side chain functionalization in the design of building blocks for in-solution and bulk purposes.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Enhancing Vocabulary Acquisition with Mnemonics in a Serious Video Game

  • Casañ-Pitarch, Ricardo|||0000-0002-1689-7954
[EN] The manipulation of virtual objects in video games acts as a form of mnemonics, enhancing information retention through visuals, narratives, and actions. This research aims to evaluate the effectiveness of the video game The Engineer in helping students in a foreign language classroom acquire new vocabulary. 64 industrial engineering bachelor¿s degree students participated in this study, with 38 in the experimental group and 26 in the control group. All students were enrolled in the professional English for industrial engineering (B2) subject, a requirement of their bachelor¿s degree program. Both groups received the same content and classroom hours. However, while the control group reinforced learning through paper-based exercises, the experimental group engaged with the video game The Engineer. To assess their performances, students from both groups completed a vocabulary pre-test in the first lesson, followed by two post-tests: one immediately after the lessons and another one two weeks later. The results showed that the experimental group outperformed the control group in both post-tests. Although scores declined in the second post-test, the experimental group exhibited a less significant drop. In conclusion, these findings suggest that the use of mnemonics in a video game could be effective in assisting students to acquire new vocabulary., This work is the result of two finalised projects that we must acknowledge. First, the project funded by the Autonomous Government of the Valencian Community (Spain), Subvencions a grups d investigació emergent, reference GV/2021/035, which supported the initial development of the video game. Subsequently, this study was further developed within the educational innovation and improvement project A+D 2023 PIME C (Ref. 1920), Enseñanza de inglés para el negocio de la ingeniería industrial a través de simulación, juego y gamificación , funded by the Vice-Rector s Office for Studies, Quality and Accreditation of the Universitat Politècnica de València through the 2023 Learning + Teaching Call.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Spatiotemporal Communication in Artificial Cell Consortia for Dynamic Control of DNA Nanostructures

  • Llopis-Lorente, Antoni|||0000-0002-6987-9506
  • Ventura-Cobos, Jordi|||0000-0001-8475-9820
  • Martínez-Máñez, Ramón|||0000-0001-5873-9674
  • Shao, Jingxin
  • Buddingh, Bastiaan C.
  • van Hest, Jan C. M.
  • Abdelmohsen, Loai K. E. A.
[EN] The spatiotemporal orchestration of cellular processes is a ubiquitous phenomenon in pluricellular organisms and bacterial communities, where sender cells secrete chemical signals that activate specific pathways in distant receivers. Despite its importance, the engineering and investigation of spatiotemporal communication in artificial cell consortia remains underexplored. In this study, we present spatiotemporal communication between cellular-scale entities acting as both senders and receivers. The transmitted signals are leveraged to elicit conformational alterations within compartmentalized DNA structures. Specifically, sender entities control and generate diffusive chemical signals, namely, variations in pH, through the conversion of biomolecular inputs. In the receiver population, compartmentalized DNA nanostructures exhibit changes in conformation, transitioning between triplex and duplex assemblies, in response to this pH variation. We demonstrate the temporal regulation of activated DNA nanostructures through the coordinated action of two antagonistic sender populations. Furthermore, we illustrate the transient distance-dependent activation of the receivers, facilitated by sender populations situated at defined spatial locations. Collectively, our findings provide novel avenues for the design of artificial cell consortia endowed with programmable spatiotemporal dynamics through chemical communication., The authors would like to acknowledge the support from the Dutch Ministry of Education, Culture, and Science (Gravitation programs 024.001.035, 024.003.013, 024.005.020 - Interactive Polymer Materials IPM, and the Spinoza premium), ERC Advanced Grant (Artisym 694120), ERC Advanced Grant Edison (101052997), the Spanish Ministry of Science and Innovation, AEI, and FEDER-EU (project PID2021-126304OB-C41), and the GVA (Project CIPROM/2021/007). A.L.-L. acknowledges support from the MSCA Cofund project oLife, which has received funding from the European Union's Horizon 2020 research and innovation program under the Grant Agreement 847675. A.L.-L. thanks the Spanish Government for his "Ramon y Cajal" Fellowship (RYC2021-034728-I), funded by MCIN/AEI/10.13039/501100011033 and by the European Union << NextGenerationEU >>/<< PRTR >>. A.L-L. also thanks the UPV for funding (Ayuda para potenciar la investigacion postdoctoral de la UPV (PAID-PD-22), Ayuda a Primeros Proyectos de Investigacion (PAID-06-22), Vicerrectorado de Investigacion de la Universitat Politecnica de Valencia (UPV)).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Harnessing Filamentous Fungi for Enzyme Cocktail Production Through Rice Bran Bioprocessing

  • Yélamos, Ana María
  • Marcos, Jose F.
  • Manzanares, Paloma
  • Garrigues, Sandra
[EN] Valorization of agri-food residues has garnered significant interest for obtaining value-added compounds such as enzymes or bioactive molecules. Rice milling by-products, such as rice bran, have limited commercial value and may pose environmental challenges. Filamentous fungi are recognized for their ability to grow on residues and for their capacity to produce large amounts of metabolites and enzymes of industrial interest. Here, we used filamentous fungi to produce enzyme cocktails from rice bran, which, due to its polysaccharide composition, serves as an ideal substrate for the growth of fungi producing cellulases and xylanases. To this end, sixteen fungal strains were isolated from rice bran and identified at the species level. The species belonged to the genera Aspergillus, Penicillium, and Mucor. The Aspergillus species displayed the highest efficiency in cellulase and xylanase activities, especially A. niger var. phoenicis and A. amstelodami. A. terreus, A. tritici, and A. montevidensis stood out as xylanolytic isolates, while P. parvofructum exhibited good cellulase activity. A. niger var. phoenicis followed by A. terreus showed the highest specific enzymatic activities of alpha- and beta-D-galactosidase, alpha-L-arabinofuranosidase, alpha- and beta-D-glucosidase, and beta-D-xylosidase. Additionally, proteomic analysis of A. terreus, A. niger var. phoenicis, and P. parvofructum exoproteomes revealed differences in enzyme production for rice bran degradation. A. niger var. phoenicis had the highest levels of xylanases and cellulases, while P. parvofructum excelled in proteases, starch-degrading enzymes, and antifungal proteins. Finally, two Penicillium isolates were notable as producers of up to three different antifungal proteins. Our results demonstrate that filamentous fungi can effectively valorize rice bran by producing enzyme cocktails of industrial interest, along with bioactive peptides, in a cost-efficient manner, aligning with the circular bio-economy framework., This work was supported by the project AGROALNEXT/2022/035 by MICIN with funding from the European Union NextGenerationEU/PRTR-C17.I1 and by Generalitat Valenciana. SG holds a Juan de la Cierva Incorporacion grant (IJC2020-042749-I) funded by MCIN/AEI/ 10.13039/501100011033, "ERDF: A way of making Europe", and 'NextGenerationEU/PRTR'. The authors also acknowledge the Severo Ochoa Excellence Program CEX 2021-001189-S funded by MCIN/AEI and by "ERDF: A way of making Europe".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Chemometric compositional analysis of phenolic compounds in fermenting samples and wines using different infrared spectyroscopy techniques

  • Aleixandre Tudo, José|||0000-0002-0586-7370
  • Aleixandre Benavent, José Luís|||0000-0003-1019-4016
  • Nieuwoudt, Helené
  • Du toit, Wessel
[EN] The wine industry requires reliable methods for the quantification of phenolic compounds during the winemaking process. Infrared spectroscopy appears as a suitable technique for process control and monitoring. The ability of Fourier transform near infrared (FT-NIR), attenuated total reflectance mid infrared (ATR-MIR) and Fourier transform infrared (FT-IR) spectroscopies to predict compositional phenolic levels during red wine fermentation and aging was investigated. Prediction models containing a large number of samples collected over two vintages from several industrial fermenting tanks as well as wine samples covering a varying number of vintages were validated. FT-NIR appeared as the most accurate technique to predict the phenolic content. Although slightly less accurate models were observed, ATR-MIR and FT-IR can also be used for the prediction of the majority of phenolic measurements. Additionally, the slope and intercept test indicated a systematic error for the three spectroscopies which seems to be slightly more pronounced for HPLC generated phenolics data than for the spectrophotometric parameters. However, the results also showed that the predictions made with the three instruments are statistically comparable. The robustness of the prediction models was also investigated and discussed., The authors gratefully acknowledge the Vali+d program of the Conselleria de Educacio Cultura i Esport APOSTD/2014/035 (Generalitat Valenciana), the National Research Foundation (NRF Free-standing postdoctoral fellowship (Grant no. 85242)) and Winetech South Africa WdT 13/01 and WdT 15/02 for financial support during the postdoctoral research collaboration between Stellenbosch University and Polytechnic University of Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Fluctuations in measured radioactive decay rates inside a modified Faraday cage: Correlations with space weather

  • Milián-Sánchez, V.
  • Scholkmann, F.
  • Mocholí Salcedo, Antonio
  • Mocholí-Belenguer, Ferran
  • Iglesias-Martínez, M. E.
  • Kolombet, V. A.
  • Panchelyuga, V. A.
  • Fernández de Córdoba, Pedro|||0000-0002-0347-7280
  • Castro-Palacio, Juan Carlos|||0000-0002-0132-9989
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
[EN] For several years, reports have been published about fluctuations in measured radioactive decay time-series and in some instances linked to astrophysical as well as classical environmental influences. Anomalous behaviors of radioactive decay measurement and measurement of capacitance inside and outside a modified Faraday cage were documented by our group in previous work. In the present report, we present an in-depth analysis of our measurement with regard to possible correlations with space weather, i.e. the geomagnetic activity (GMA) and cosmic-ray activity (CRA). Our analysis revealed that the decay and capacitance time-series are statistically significantly correlated with GMA and CRA when specific conditions are met. The conditions are explained in detail and an outlook is given on how to further investigate this important finding. Our discovery is relevant for all researchers investigating radioactive decay measurements since they point out that the space weather condition during the measurement is relevant for partially explaining the observed variability., This work has been partially financed by: grant no. 20170764 (Equipos de deteccion, regulacion e informacion en el sector de los sistemas inteligentes de transporte (ITS). Nuevos modelos y ensayos de compatibilidad y verificacion de funcionamiento) (Spain), by grant no. RTI2018-102256-B-I00 (Spain), by the Generalitat Valenciana (Spain) under project Bioingenieria de las Radiaciones Ionizantes. Biorad (PROMETEO/2018/035) and the project MEMO RADION (IDIFEDER/2018/038) co-financed by the Programa Operativo del Fondo Social Europeo 2014-2020", and by grant No.075-00845-20-01 (Russia).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Structural and vibrational study of Bi2Se3 under high pressure

  • Vilaplana Cerda, Rosario Isabel|||0000-0003-0504-2157
  • Gomis, O.|||0000-0001-6763-0638
  • Manjón, Francisco-Javier|||0000-0002-3926-1705
  • Santamaría-Pérez, D.
  • González, J.
  • Segura, A.
  • Muñoz, A.
  • Rodríguez-Hernández, P.
  • Pérez-González, E.
  • Marín-Borrás, V.
  • Muñoz-Sanjose, V.
  • Drasar, C.
  • Kucek, V.
The structural and vibrational properties of bismuth selenide (Bi 2Se 3) have been studied by means of x-ray diffraction and Raman scattering measurements up to 20 and 30 GPa, respectively. The measurements have been complemented with ab initio total-energy and lattice dynamics calculations. Our experimental results evidence a phase transition from the low-pressure rhombohedral (R-3m) phase (¿-Bi 2Se 3) with sixfold coordination for Bi to a monoclinic C2/m structure (ß-Bi 2Se 3) with sevenfold coordination for Bi above 10 GPa. The equation of state and the pressure dependence of the lattice parameters and volume of ¿ and ß phases of Bi 2Se 3 are reported. Furthermore, the presence of a pressure-induced electronic topological phase transition in ¿-Bi 2Se 3 is discussed. Raman measurements evidence that Bi 2Se 3 undergoes two additional phase transitions around 20 and 28 GPa, likely toward a monoclinic C2/c and a disordered body-centered cubic structure with 8-fold and 9- or 10-fold coordination, respectively. These two high-pressure structures are the same as those recently found at high pressures in Bi 2Te 3 and Sb 2Te 3. On pressure release, Bi 2Se 3 reverts to the original rhombohedral phase after considerable hysteresis. Symmetries, frequencies, and pressure coefficients of the Raman and infrared modes in the different phases are reported and discussed. © 2011 American Physical Society., This work was done under financial support from Spanish Ministry of Science and Innovation under Projects No. MAT2007-66129, No. MAT2010-21270-C04-03/04, and No. CSD-2007-00045 and from the Valencian government under Project No. Prometeo/2011-035. It is also supported by the Ministry of Education, Youth and Sports of the Czech Republic Project No. MSM 0021627501. E.P.G. acknowledges the financial support of the Spanish Ministry of Education. Supercomputer time was provided by the Red Espanola de Supercomputacion and the MALTA cluster.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Towards the Recovery of Traditional Hot-Mixed Lime Techniques: Influence on the Construction Process and Structural Behaviour in Rammed Earth with Lime

  • Mileto, Camilla|||0000-0002-6987-8802
  • Vegas López-Manzanares, Fernando|||0000-0003-0315-6839
  • Hueto-Escobar, Alicia|||0000-0003-4628-6545
  • Manzano-Fernández, Sergio|||0000-0001-7936-1324
[EN] Despite the widespread imposition of other types of industrial lime, the recovery of hot-mixed lime techniques is of interest both in its application in historic heritage interventions and its possible application in contemporary constructions. This article aims to contribute to this recovery through an initial phase of application to construction through the execution of reinforced rammed earth walls and test samples, providing conclusions on the practical implications of this traditional lime-slaking method. These test samples executions were then followed by a second phase of compression tests, incorporating further tests on samples of hot-mixed lime, air lime and hydraulic lime at different points in time. Thus, initial conclusions were established on the effect of hotmixed lime on mechanical properties and their evolution over time compared to other industrial limes. Although the traditional method for slaking quicklime and its use in construction as hot-mixed lime is relatively straightforward, it is necessary to control its correct slaking and apply certain safety measures. The use of hot-mixed lime in reinforced rammed earth walls presents a slightly higher mean compressive strength than those which use slaked air lime and a mean compressive strength similar to that obtained with slaked hydraulic lime in initial phases, although it appears to be conditioned by the form of quicklime used. Based on these contributions the viable use of hot-mixed lime for construction or intervention in rammed earth walls is established and proves particularly advantageous in terms of structural advantages., This work was funded by Cátedra EMR-CPA. This research is included in the research project Earth4Future: Sustainable reuse of earthen architecture and its lessons for contemporary architecture (Reference PID2022-139154OB-I00), funded by the Spanish Ministry of Science, Innovation and University and in the research project Re-Habitat: Restauración y rehabilitación sostenible de viviendas tradicionales en contextos históricos (Reference CIAICO/2022/035) funded by the Regional Ministry for Innovation, Universities, Science and Digital Society of the Generalitat Valenciana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Prostate cancer Monte Carlo dose model with (177)Lutetium and (125)Iodine treatments

  • Juste-Vidal, Belen-Jeanne|||0000-0003-1978-3765
  • Miró Herrero, Rafael|||0000-0003-1012-0869
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
  • Morató-Rafet, Sergio
  • Peris, S.
[EN] Radiation Therapy Planning Systems (RTPS) presently operating in hospitals comprise algorithms founded on deterministic simplifications that do not correctly take into account electron lateral transport in the regions where there are variations in density, and as a consequence, erroneous dose estimations could be generated. According to this, the possibility of using the Monte Carlo (MC) method in radiation planning systems is proposed in this work, since this technique could affect positively on the patient treatment. The proposed methodology provides 3D dose results that are more accurate and considers the inhomogeneities density variations. This paper presents a MC simulation of two different prostate cancer treatments using the latest version of MCNP, v.6.1.1; brachytherapy with I-125 seeds and radiolabeled Lu-177-PSMA. To that, a 3D model of the anatomy of a real anonymized patient is created from the segmentation of Computed Tomography (CT) images. Treatments over this 3D model is simulated and the dose given to the prostate and each surrounding organ is obtained for both treatments. Results have been verified with doses calculated by deterministic planning system used in hospital in the case of brachytherapy treatment, demonstrating the efficiency of MC method in the development of radiation cancer treatments, not only because of the results accuracy but also concerning the clinical affordable computing times
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Confined Motion: Motility of Active Microparticles in Cell-Sized Lipid Vesicles

  • Song, Shidong
  • Mason, Alexander F.
  • Abdelmohsen, Loai K.E.
  • van Hest, Jan C. M.
  • Llopis-Lorente, Antoni|||0000-0002-6987-9506
[EN] Active materials can transduce external energy into kinetic energy at the nano and micron length scales. This unique feature has sparked much research, which ranges from achieving fundamental understanding of their motility to the assessment of potential applications. Traditionally, motility is studied as a function of internal features such as particle topology, while external parameters such as energy source are assessed mainly in bulk. However, in real-life applications, confinement plays a crucial role in determining the type of motion active particles can adapt. This feature has been however surprisingly underexplored experimentally. Here, we showcase a tunable experimental platform to gain an insight into the dynamics of active particles in environments with restricted 3D topology. Particularly, we examined the autonomous motion of coacervate micromotors confined in giant unilamellar vesicles (GUVs) spanning 10¿50 ¿m in diameter and varied parameters including fuel and micromotor concentration. We observed anomalous diffusion upon confinement, leading to decreased motility, which was more pronounced in smaller compartments. The results indicate that the theoretically predicted hydrodynamic effect dominates the motion mechanism within this platform. Our study provides a versatile approach to understand the behavior of active matter under controlled, compartmentalized conditions., The authors would like to acknowledge the support from the Dutch Ministry of Education, Culture and Science (Gravitation program 024.001.035 and Spinoza premium) and the ERC Advanced Grant (Artisym 694120) . A.L.-L. acknowledges the support from the MSCA Cofund Project of Life, which has received funding from the European Union's Horizon 2020 research and innovation program under the grant agreement 847675, and the Maria Zambrano Program from the Spanish Government funded by NextGenerationEU from the European Union. Dr. Bastiaan Buddingh is thanked for useful discussions regarding GUV preparation and handling. Dr. Shoupeng Cao is thanked for providing the azido-functionalized block polymer. We specially thank Prof. Samuel Sanchez for the tailor-made particle-tracking software based on Python.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Modelization of extended axial field-of-view PET scanners to analyze the performance improvement

  • Peña-Acosta, Miriam Magela
  • Gallardo Bermell, Sergio|||0000-0002-3703-9983
  • M. Lorduy|||0000-0002-8942-8278
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
[EN] Positron Emission Tomography (PET) offers non-invasive insights into physiological processes. However, in clinical practice conventional PET scanners face limitations in comprehensive imaging due to their restricted axial field of view (FOV).This study explores the benefits and challenges of extending PET scanner AFOV using Monte Carlo simulation with GATE 9.1. The Biograph Vision Quadra scanner is a novel system based on the Digital Biograph Vision 600 scanner. Both devices use silicon photomultipliers and 3.2 x 3.2 × 20 mm Lutetium Oxyorthosilicate crystals (LSO). However, the 32 detector rings of the Quadra scanner enable a four-fold expansion in the Axial Field Of View (FOV) compared to Vision. As a result, higher sensitivity, and an enhancement of noise equivalent count rate and image quality are achieved. The purpose of this study is to analyze the effect of increasing the number of detector rings and the axial FOV on the scanner performance. To accomplish this, four different geometries are modeled using GATE (GEANT4 Application for Tomographic Emission). Based on the Biograph Vision 600 model, the length and the number of detector rings are gradually extended to reach the length of the Quadra scanner. Thus, four geometries with 8 (25.6 cm), 16 (51.2 cm), 24 (76.8 cm) and 32 (102.4 cm) detector rings are simulated, keeping the crystal configuration and the dimensions in the transaxial plane. The study evaluates sensitivity, Noise Equivalent Count Rate (NECR), and image quality parameters. Results indicate a significant increase in sensitivity and NECR with FOV extension, underscoring enhanced performance. However, artifact occurrence, particularly concentric circular patterns and background homogeneity changes, accentuates with extended AFOV. Normalization algorithms, particularly component-based normalization, mitigate these artifacts. This study contributes to the understanding of the advantages and limitations of extending PET scanner AFOV, offering insights into the effectiveness of component-based normalization for improving PET image quality., The authors are indebted to the Santiago Grisolia Program (GRISOLIAP/2021/186) for its training research personnel and the support of the BIORA Project (PROMETEO/2018/035).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Frequency-domain models in the SPN approximation for neutron noise calculations

  • Carreño, Amanda|||0000-0003-2302-1157
  • Vidal-Ferràndiz, Antoni|||0000-0001-5449-7356
  • Ginestar Peiro, Damián|||0000-0003-1243-6648
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
[EN] Simulations of the neutron flux fluctuations, known as neutron noise, can be performed by means of the spherical harmonics equations (SPN) approximation with higher accuracy than with the diffusion equation. In this sense, one can solve these equations in the time-domain or in the frequency-domain. This last approach permits solving the neutron noise without performing complete time-dependent simulations for monochromatic perturbations. This work presents two formulations of the SPN equations in the frequency domain, that are obtained by using different treatments of the time derivatives of the field moments. The methodology is verified with several neutron noise problems where the numerical results are compared with the time-domain computations of FEMFFUSION code. The C5G7 noise benchmark compares both SPN formulations, showing the applicability of the diffusive SPN approximation., This work has been partially supported by Spanish Ministerio de Economía y Competitividad under projects ENE2017-89029-P and MTM2017-85669-P. Furthermore, this work has been financed by the Generalitat Valenciana under the project PROMETEO/2018/035.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Strategies of Preconditioner Updates for Sequences of Linear Systems Associated with the Neutron Diffusion

  • Carreño, Amanda|||0000-0003-2302-1157
  • Ginestar Peiro, Damián|||0000-0003-1243-6648
  • Vidal-Ferràndiz, Antoni|||0000-0001-5449-7356
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
  • Bergamaschi, L.
  • Martínez, A.
[EN] The time-dependent neutron diffusion equation approximates the neutronic power evolution inside a nuclear reactor core. Applying a Galerkin finite element method for the spatial discretization of these equations leads to a stiff semi-discrete system of ordinary differential equations. For time discretization, an implicit scheme is used, which implies solving a large and sparse linear system of equations for each time step. The GMRES method is used to solve these systems because of its fast convergence when a suitable preconditioner is provided. This work explores several matrix-free strategies based on different updated preconditioners, which are constructed by low-rank updates of a given initial preconditioner. They are two tuned preconditioners based on the bad and good Broyden¿s methods, initially developed for nonlinear equations and optimization problems, and spectral preconditioners. The efficiency of the resulting preconditioners under study is closely related to the selection of the subspace used to construct the update. Our numerical results show the effectiveness of these methodologies in terms of CPU time and storage for different nuclear benchmark transients, even if the initial preconditioner is not good enough., This work has been partially supported by Spanish Ministerio de Economia y Competitividad under projects ENE2017-89029-P and MTM2017-85669-P. The second and third authors have been supported by the INdAM Research group GNCS project: Optimization and Advanced Linear Algebra for Problems Governed by PDEs. Furthermore, this work has been financed by the Generalitat Valenciana under the project PROMETEO/2018/035. We sincerely thank the three anonymous reviewers for helping us to significantly improve the manuscript.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

PET image reconstruction and dosimetry from voxelized phantoms with GATE

  • M. Lorduy|||0000-0002-8942-8278
  • Gallardo Bermell, Sergio|||0000-0002-3703-9983
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
  • Avelino de Andrade, Pedro H.
  • Peña-Acosta, Miriam Magela
[EN] Accurate patient-specific internal dosimetry is a critical concern in the field of nuclear medicine. GATE is a robust Monte Carlo toolkit renowned for its integration of Geant4 algorithms, PET specialized tools and patient-specific dosimetry estimation. In this work, a GATE model is developed to simulate the PET scanner Biograph Vision and a voxelized phantom from Computed Tomography (CT) images. The segmentation of the CT images is performed using a deep learning model capable of automatically delineating anatomical structures, setting the basis for creating the patient-specific voxel phantom. GATE Nested parameterization method is employed for its efficient memory usage in defining geometry and faster navigation for ultra-large number of voxels. Simultaneously, PET acquisition data is used to assign the corresponding activity of a source to each voxel. This study aims to highlight the potential of GATE as a simulation tool within a methodology that integrates PET image recon- struction and internal dosimetry calculation, focused specifically on its application in prostate diagnostic testing via 18F-FDG. S-Value and dose are calculated for the prostate gland, yielding values of 1.52 E 4 mGy/MBq¿s and 8.1 mGy, respectively, consistent with literature findings. Differences in S-Values with the ICRP Phantom and with OpenDose for surrounding organs range from 0.5% to 67.9%, which can be attributed to the choice of phantoms used in calculations. This work confirms the capability of GATE to reproduce clinical studies using anthropomorphic voxelized models., The authors are indebted to the Santiago Grisolia Program (GRISOLIAP/2021/186) for its training research personnel and the support of the BIORA (PROMETEO/2018/035) project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Intangible heritage: actions and strategies for the maintenance of traditional crafts in the United Kingdom

  • Mileto, Camilla|||0000-0002-6987-8802
  • Vegas López-Manzanares, Fernando|||0000-0003-0315-6839
[EN] Purpose The conservation of vernacular architecture is closely linked to the conservation of the traditional materials and techniques needed for maintenance, repair and restoration. Since industrial materials first entered the construction market, building traditions and knowledge have been progressively lost, along with their accompanying guilds. In many areas of Europe and beyond, this gradual loss of intangible heritage associated with the knowledge of traditional construction is having an extremely negative impact on the conservation of vernacular architecture and settlements. This article presents research aiming to identify the actions and strategies that can be carried out to promote the conservation of traditional building guilds. Design/methodology/approach The United Kingdom has been identified as a territory where numerous actions have been carried out for the transmission of knowledge on traditional construction since the late 19th century. The information collected has resulted in a selection of 33 cases of legislative and public management policies; groups, associations and foundations; training courses and tools; and tools for dissemination and raising awareness. Findings The fieldwork completed in all cases has enabled the identification of the actions implemented, their target audiences and the strategies sought, providing a set of examples which can be transferred to other international settings with similar problems. Originality/value This is a study that had not been previously carried out and that contributes significantly to establishing possible actions and strategies to be implemented in cases where the traditional building crafts are intended to be preserved and promoted., The authors wish to thank Marcel Vellinga; Hossam Mahdy; John Fiedler, Nils White, John Steward and Margaret Daly for their conversations, meetings, interviews and advice, as well as all the professionals who assisted us in different centres, associations, museums, archives and libraries. This research was carried out thanks to funding for the authors' stay at Oxford Brookes (July-August 2022), through the "Beca para estancias en centros de investigacion fuera de la Comunidad Valenciana dirigida a profesores e investigadores de las universidades y centros de investigacion" awarded by the Generalitat Valenciana (CIBEST/2021/14 and CIBEST/2021/17) and it is part of the research project "RE-HABITAT - Restauracion y rehabilitacion sostenible de viviendas tradicionales en contextos historicos" financed by the R&D&I Programme of the Regional Ministry for Innovation, Universities, Science and Digital Society of Generalitat Valenciana (CIAICO/2022/035).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Developing a novelty method to estimate Radon doses in a Waste Water pre-Treatment Plant

  • Martinez-Ferri, Javier Enrique|||0000-0003-0259-8360
  • Juste-Vidal, Belen-Jeanne|||0000-0003-1978-3765
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
  • Miró Herrero, Rafael|||0000-0003-1012-0869
  • Martorell Alsina, Sebastián Salvador|||0000-0003-1706-4740
  • Ortiz Moragón, Josefina
[EN] According to World Health Organization (WHO), the radon is the second leading cause of lung cancer. This work is centered on a Waste Water Pre-Treatment Plant (WWTP) with radon concentration above Spanish action level (600 Bq per cubic meter). The authors have developed a novelty method based on gamma and alpha spectrometry to measure the radon equilibrium factor. At the same time, a Matlab (c) algorithm (UPVDose) has been coded based on the International Commission on Radiological Protection (ICRP) 66 Human Respiratory Tract Model for Radiological Protection (HRT), to calculate the inhalation doses received by workers of this treatment plant due to the radon progeny. The effective doses of the workers obtained in the human respiratory tract are found to be low, but results are very dependent on the radionuclide type of absorption
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Hydrothermal Degradation Behavior of Y-TZP Ceramics Sintered by Nonconventional Microwave Technology

  • PRESENDA-BARRERA, ALVARO
  • Moreno, Rodrigo
  • Salvador Moya, Mª Dolores|||0000-0002-4242-478X
  • Borrell Tomás, María Amparo|||0000-0003-4292-4538
Different factors such as the characteristics of starting powders, their processing, the sintering technique and the final sintering temperature were assessed with the goal to improve the low-temperature degradation (LTD) resistance of 3Y-TZP materials without compromising on the mechanical properties. The degradation of hydrothermally treated specimens was studied by AFM, nanoindentation technique, micro-Raman spectroscopy, and electron microscopy. 3Y-TZP previously prepared in laboratory by colloidal processing, and sintered by microwave method at low temperature (1200 degrees C) led to excellent mechanical and LTD resistance, as compared to dental restorations based on Y-TZP commercial material. In the former, the presence of m-phase was almost nonexistent even after 200 h of exposure to LTD conditions and the initial mechanical properties were maintained, giving 16 and 250 GPa mean values for hardness and Young's modulus, respectively. The influence of the fast-technology by microwave heating is presented with a nonconventional sintering method to fabricate 3Y-TZP ceramics for dental application with very high resistance against LTD and optimized mechanical properties., Presenda acknowledges the Generalitat Valenciana for his Santiago Grisolia scholarship (GRISOLIA/2013/035). A. Borrell acknowledges the Spanish Ministry of Science and Innovation for her Juan de la Cierva contract (JCI-2011-10498) and the Generalitat Valenciana for the financial support under the GV/2014/009 project. M. D. Salvador thanks CAPES - Programa Ciencias sem Fronteiras (Brazil) for the concession of a PVE project No. A086/2013.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Validation of the SHNC time-dependent transport code based on the spherical harmonics method for complex nuclear fuel assemblies

  • Capilla Romá, Maria Teresa|||0000-0002-8764-5754
  • Talavera Usano, César Félix|||0000-0002-8542-9097
  • Ginestar Peiro, Damián|||0000-0003-1243-6648
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
[EN] The diffusion approximation to the time-dependent Boltzmann transport equation gives accurate results for traditional nuclear reactor designs, but new reactor designs and new fuel elements require neutron transport methods. We develop a numerical approximation to the time-dependent transport equation coupled to delayed neutron precursors based on the spherical harmonics P L equations, for odd L, and on the Backward Euler finite difference discretization of time. The resulting scheme can be written as a stationary form of diffusive second order PL equations. This allows a reduction by half to the number of unknowns and also to apply a nodal collocation method to the spatial discretization of the problem, using coarse spatial grids to further reduce memory requirements. This scheme is validated with several transient benchmarks, where the convergence properties are established and compared with the simplified PL approximation. A more realistic transient benchmark, based on the two-group C5 MOX problem, is finally introduced, showing the need of high order P L approximation for complex fuel geometries., This work was partially supported by the Spanish Agencia Estatal de Investigacion under project ENE2017-89029-P-AR, and the Generalitat Valenciana under project PROMETEO/2018/035. The authors express their gratitude to the anonymous reviewers for their suggestions and helpful comments.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Form Follows Availability: Resource Scan for Sustainable Architecture in Siaya County, Kenya

  • Hage, Sina
  • Hollermann, Sebastian
  • Vegas López-Manzanares, Fernando|||0000-0003-0315-6839
  • Mileto, Camilla|||0000-0002-6987-8802
[EN] This study underscores the crucial understanding of local resource availability in circular economy models, particularly within sustainable architecture and civil engineering. The aim is to reduce waste and energy consumption and to diminish reliance on long-distance transportation, thus supporting local economic independence and resilience. Additionally, the study highlights the importance of respecting and integrating cultural heritage within architectural practices. Using a comprehensive mixed-methods approach, including literature reviews, site visits, and interviews with local stakeholders, the research focuses on Siaya County, Kenya. It examines available resources relevant to the architectural practices and climate of the Luo ethnic group. Key findings indicate that the region¿s soil contains approximately 50% clay, which is essential for developing sustainable earth-building techniques. This local clay resource provides a foundation for environmentally friendly construction methods that reduce dependence on imported materials. In addition, the study identifies Cassia siamea, Eucalyptus spp., and Grevillea robusta as viable alternatives to the traditionally used Markhamia lutea timber. These species not only offer sustainable options but also enhance logistical and economic feasibility due to their local abundance. For thatching, Cymbopogon and Chrysopogon zizanioides are identified as more durable options compared to Hyparrhenia hirta, offering increased longevity and resilience in roofing materials. The study further highlights the potential of natural fibres such as Agave sisalana and sugar cane for reinforcing soil bricks, thereby enhancing the structural integrity of earth-based constructions. These findings provide sustainable and durable construction solutions that align with both local practices and resources. This research supports the integration of indigenous materials and culturally respectful architectural practices. It promotes environmentally conscious design solutions that coincide with circular economy principles, fostering cultural and environmental sustainability and promoting the resilience of local communities. By embedding these practices, the study presents a model for developing robust, locally adapted, and culturally sensitive architectural solutions that address current and future challenges in sustainable design., I am particularly grateful to the Jade University of Applied Sciences, Oldenburg, and the JadeProf Program for their financial support, which made this research possible, and the Universitat Politècnica de València for mentorship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

The Protection of the Historic City: The Case of the Surroundings of the Lonja de la Seda in Valencia (Spain), UNESCO World Heritage

  • Mileto, Camilla|||0000-0002-6987-8802
  • Vegas López-Manzanares, Fernando|||0000-0003-0315-6839
[EN] In geographical terms, historic cities possess an inertia in regard to the modification of urban function. This explains why buildings may change over time, but the location of the functions remains. For over a thousand years, the city of Valencia has concentrated the commercial activity of its historic centre around the building of the Lonja de la Seda, its surrounding buildings, and its adjacent spaces, streets and squares. Recent constructions coexist with centuries-old buildings, witnesses to the transformations of this urban enclave, which has retained its commercial function. Although the Lonja de la Seda was declared World Heritage by UNESCO in 1996, its surroundings, despite being of interest and closely linked to the protected building, were not. This article analyses the history and evolution of the built fabric and urban spaces of this complex, which represents the nerve centre for commerce in the city of Valencia. This text presents research based on studies carried out directly on the buildings in this context by the authors, as well as indirect examinations of documentation from the archives and the existing bibliography. The aim of this study is to showcase how combining material and documentary studies can lead to a broader definition of the tangible and intangible values of cultural heritage. This, in turn, could lead to the comprehensive enhancement of the historic city, where historic residential fabric and notable buildings are merely manifestations of the process for the construction of the city.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A hybrid genetic algorithm to reduce the radiation dose in CR images

  • Sánchez, M. G.
  • Fajardo-Delgado, D.
  • Vidal-Gimeno, Vicente-Emilio|||0000-0002-2384-7015
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
[EN] The quality of computed radiography (CR) images typically relate to patient radiation exposure. The lower the X-ray dose exposure, the higher the level of inherent noise in the CR images. In this work, we address the noise reduction problem by using an estimation of the standard deviation in CR images as an objective function to minimize. We propose a hybrid genetic algorithm for this aim, which produces improved versions of CR images. We also applied an edge-detection method based on the Canny algorithm to preserve the edges of the original CR images. We executed our proposed algorithm for CR images obtained under different radiation exposures. Experimental results show that our solution improves lower radiation CR images reaching a quality as similar to those with higher radiation doses., This research has been supported by the Universitat Politecnica de Valencia, Generalitat Valenciana, under PROMETEO/2018/035 co-financed by FEDER funds (Spain). M. Sanchez and D. Fajardo-Delgado gratefully acknowledge the financial support from PRODEP and TecNM (Mexico) under grants 511-6/17-8931 (ITCGUZ-CA-7) and 5826.19-P, respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A Parallel Fuzzy Algorithm for Real-Time Medical Image Enhancement

  • Arnal, Josep
  • Súcar, Luis B.
  • CHILLARÓN-PÉREZ, MÓNICA|||0000-0002-7611-8908
  • PARCERO IGLESIAS, ESTIBALIZ|||0000-0002-5155-2900
  • Vidal-Gimeno, Vicente-Emilio|||0000-0002-2384-7015
[EN] Medical images may be corrupted by noise. This noise affects the image quality and can obscure important information required for accurate diagnosis. Effectively apply filtering techniques can facilitate diagnosis or reduce radiation exposure. In this paper, we introduce a parallel method designed to reduce mixed Gaussian-impulse noise from digital images. The method uses fuzzy logic and the fuzzy peer group concept. Implementations of the method on multi-core interface using the open multi-processing (OpenMP) and on graphics processing units (GPUs) using CUDA are presented. Efficiency is measured in terms of execution time and in terms of MAE, PSNR and SSIM over medical images from the mini-MIAS database and over computed radiography (CR) images generated at different exposure levels. These images have been contaminated with impulsive and/or Gaussian noise. Experiments show that the proposed method obtains good performance in terms of the above mentioned objective quality measures. After applying multi-core and GPUs optimization strategies, the observed time shows that the new filter allows to remove mixed Gaussian-impulse noise in real-time., This research was supported by the Spanish Ministry of Science, Innovation and Universities (Grant RTI2018-098156-B-C54) co-financed by FEDER funds.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

High-pressure studies of topological insulators Bi2Se3,Bi2Te3, and Sb2Te3

  • Manjón, F. J.
  • Pérez-González, E.
  • Santamaría-Pérez, D.
  • Marín-Borrás, V.
  • Segura-García del Río, A.
  • González, Jesús
  • Rodríguez-Hernández, P.
  • Muñoz, A.
  • Drasar, C.
  • Kucek, V.
  • Vilaplana Cerda, Rosario Isabel|||0000-0003-0504-2157
  • Gomis, O.|||0000-0001-6763-0638
  • Muñoz-Sanjosé, V.
Bi2Se3, Bi2Te3, and Sb2Te3 are narrow bandgap semiconductors with tetradymite crystal structure (R-3m) which have been extensively studied along with their alloys due to their promising operation as thermoelectric materials in the temperature range between 300 and 500¿K. Studies on these layered semiconductors have increased tremendously in the last years since they have been recently predicted and demonstrated to behave as 3D topological insulators. In particular, a number of high-pressure studies have been done in the recent years in these materials. In this work we summarize the main results of the high-pressure studies performed in this family of semiconductors to date. In particular, we review recent results that address the main characteristics of the pressure-induced electronic topological transition and structural phase transitions observed in this family of compounds. Future high-pressure studies to be performed on these 3D topological insulators are also commented., This study was supported by the Spanish government and EU-FEDER under Grants: MAT2008-06873-C02-02, TEC2011-28076-C02-02, MAT2010-21270-C04-01/03/04, and by MALTA Consolider Ingenio 2010 project (CSD2007-00045). Due acknowledgement is also given to Generalitat Valenciana through projects Prometeo GV2011/035 and ISIC/2012/008. We are also indebted to the Vicerrectorado de Investigacion y Desarrollo of the Universitat Politecnica de Valencia (UPV2011-0914 PAID-05-11 and UPV2011-0966 PAID-06-11). E. P-G., A. M., and P. R-H. acknowledge computing time provided by Red Espanola de Supercomputacion (RES) and MALTA-Cluster.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Strategies for the Regeneration of Rural Settlements Facing Depopulation: Analysis Methodology and Case Studies

  • Mileto, Camilla|||0000-0002-6987-8802
  • Vegas López-Manzanares, Fernando|||0000-0003-0315-6839
[EN] Based on the analysis of bibliographical sources, official governance documents, expert interviews and fieldwork on the phenomenon of depopulation in the United Kingdom, this text identifies the different geographical, historical, economic and political factors influencing different fields, including territory, agriculture, urbanism, rural settlements, traditional architecture, population and society. The set of factors and fields of action was recorded in a multifactor matrix that enabled the analysis of cases applied in the United Kingdom to identify strategies and actions aimed at guaranteeing the conservation of vernacular settlements and architecture. The study was subsequently expanded with detailed research in four areas: the regions of the Cotswolds (Oxfordshire) and Cornwall in England, Mid West Wales and the Isle of Skye in Scotland. The aim of this study, applied to the case of the United Kingdom, is to extract guidelines, strategies and actions that can be applied to other contexts where tangible and intangible vernacular heritage is to be safeguarded., This research was carried out thanks to funding of the authors' stay at Oxford Brookes (July-August 2022) through the "Beca para estancias en centros de investigacion fuera de la Comunidad Valenciana dirigida a profesores e investigadores de las universidades y centros de investigacion" (CIBEST/2021/14 and CIBEST/2021/17) awarded by the Generalitat Valenciana y se enmarca dentro del proyecto de investigacion "RE-HABITAT-Restauracion y rehabilitacion sostenible de viviendas tradicionales en contextos historicos" financiado por el Programa I+D+i de la Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital De la Generalitat Valenciana (CIAICO/2022/035).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Experimental estimation of the diffusion coefficient in radon barrier materials based on ISO/TS 11665-13:2017

  • Ruvira-Quintana, Beatriz|||0000-0002-9108-1197
  • García-Fayos, Beatriz|||0000-0002-7941-4243
  • Juste-Vidal, Belen-Jeanne|||0000-0003-1978-3765
  • Arnal Arnal, José Miguel
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
[EN] Due to the health risks posed by high radon concentrations, many regulations impose concentration restrictions and set out several techniques to prevent radon entry into enclosed spaces. One of the most effective technique to protect new buildings from radon entry is to install a radon barrier over the entire surface of the ground beneath the foundation. Whether a barrier is suitable for protection is determined by the diffusion coefficient, the methodology which is standardised in ISO/TS 11665-13:2017. These barriers are typically made of polymeric or bitumen materials, which have diffusion coefficients between 10(-11) and 10(-13) m(2)/s. By applying a modification to the ISO standard that allows shorter test times, the diffusion coefficients of a commercial membrane (6.21 +/- 0.75 .10(-13)), polyethene (1.14 +/- 0.14 .10(-12)), polypropylene (4.35 +/- 0.53 .10(- 14)), polyvinyl chloride (3.55 +/- 0.43 .10(-14)), polystyrene (4.96 +/- 0.60 .10(-13)) and polymethyl methacrylate (4.07 +/- 0.49 .10(-13)) have been measured, the latter two material values not being published so far. The results validate the developed methodology since the diffusion coefficients provided are comparable with those of the literature. In all cases, a concentration reduction of 99% is obtained. A relationship is observed between the amount of radon adsorbed by the material and its thickness and chemical composition., This work is financed by the Operational Programme 2014-2020 Comunitat Valenciana of the European Regional Development Fund and the Generalitat Valenciana under the projects Bioingenieria de las Radiaciones Ionizantes. Biorad (PROMETEO/2018/035) and MEMO RADION (IDIFEDER/2018/038) and also by the European Social Fund through Ayuda Garantia Juvenil Gva-Capacidades de deteccion del Laboratorio de Radiaciones Ionizantes (GJIDI/2018/A/016). The authors would like to thank Radiansa for providing some of the material used in the tests and Gdes for their collaboration during the research.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

CT image reconstruction with SuiteSparseQR factorization package

  • CHILLARÓN-PÉREZ, MÓNICA|||0000-0002-7611-8908
  • Vidal-Gimeno, Vicente-Emilio|||0000-0002-2384-7015
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
[EN] SuiteSparseQR is a factorization package for sparse matrices oriented to parallelism in multicore architectures. It employs BLAS and LAPACK as well as Intel's Threading Building Blocks to achieve high performance. Through the SPQR method implemented in this package we can use the QR decomposition to reconstruct CT images efficiently. In this paper, we analyze the behavior of the package applied to the reconstruction of medical CT images, studying the quality of the obtained image. To this purpose, we use the image dataset DeepLesion, which provides various CT studies of different lesions in different organs or tissues. We also compare it to our previous iterative reconstruction method called LSQR. This new method is promising since the computations are simplified if we compare it to the iterative options and the reconstructions are high-quality, as the results show., This research has been supported by "Universitat Politecnica de Valencia", "Generalitat Valenciana" under PROMETEO/2018/035 co-financed by FEDER funds, as well as ACIF/2017/075 predoctoral grant, and the "Spanish Ministry of Economy and Competitiveness" under Grant TIN2015-66972-05-4-R and TIAMHA co-financed by FEDER funds
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Computed tomography medical image reconstruction on affordable equipment by using Out-Of-Core techniques

  • CHILLARÓN-PÉREZ, MÓNICA|||0000-0002-7611-8908
  • Vidal-Gimeno, Vicente-Emilio|||0000-0002-2384-7015
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
  • Quintana Ortí, Gregorio
[EN] Background and objective: As Computed Tomography scans are an essential medical test, many techniques have been proposed to reconstruct high-quality images using a smaller amount of radiation. One approach is to employ algebraic factorization methods to reconstruct the images, using fewer views than the traditional analytical methods. However, their main drawback is the high computational cost and hence the time needed to obtain the images, which is critical in the daily clinical practice. For this reason, faster methods for solving this problem are required. Methods: In this paper, we propose a new reconstruction method based on the QR factorization that is very efficient on affordable equipment (standard multicore processors and standard Solid-State Drives) by using Out-Of-Core techniques. Results: Combining both affordable hardware and the new software proposed in our work, the images can be reconstructed very quickly and with high quality. We analyze the reconstructions using real Computed Tomography images selected from a dataset, comparing the QR method to the LSQR and FBP. We measure the quality of the images using the metrics Peak Signal-To-Noise Ratio and Structural Similarity Index, obtaining very high values. We also compare the efficiency of using spinning disks versus Solid-State Drives, showing how the latter performs the Input/Output operations in a significantly lower amount of time. Conclusions: The results indicate that our proposed me thod and software are valid to efficiently solve large-scale systems and can be applied to the Computed Tomography reconstruction problem to obtain high-quality images., This research has been supported by "Universitat Politecnica de Valencia", "Generalitat Valenciana" under PROMETEO/2018/035 and ACIF/2017/075, co-financed by FEDER and FSE funds, and the "Spanish Ministry of Science, Innovation and Universities" under Grant RTI2018-098156-B-C54 co-financed by FEDER funds.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Factors Influencing the Pedestrian Injury Severity of Micromobility Crashes

  • Almudena Sanjurjo-de-No
  • Pérez Zuriaga, Ana María|||0000-0002-8434-1106
  • García García, Alfredo|||0000-0003-1345-3685
[EN] The growth of micromobility transport in cities has created a new mobility paradigm, but this has also resulted in increased traffic conflicts and collisions. This research focuses on understanding the impacts of micromobility vehicles on pedestrian injury severity in urban areas of Spain between 2016 and 2021. The Random Forest classification model was used to identify the most significant factors and their combinations affecting pedestrian injury severity. To address the issue of unbalanced data, the synthetic minority oversampling technique was employed. The findings indicate that pedestrians' age, specifically those 70 years or older, is the most important variable in determining injury severity. Additionally, collisions at junctions or on weekends are associated with worse outcomes for pedestrians. The results highlight the combined influence of multiple factors, including offenses and distractions by micromobility users and pedestrians. These factors are more prevalent among younger micromobility users and those riding for leisure or on weekends. To enhance micromobility road safety and reduce pedestrian injuries, separating micromobility traffic from pedestrian areas is recommended, restricting micromobility vehicle use on sidewalks, providing training and information to micromobility users, conducting road safety campaigns, increasing enforcement measures, and incorporating buffer zones in bike lanes near on-street parking., This research is part of the research project PID2019-111744RB-I00, funded by MCIN/AEI/10.13039/501100011033. Likewise, this research has been partially funded by the European Union-Next GenerationEU (RD 289/2021), thanks to the granting of a "Margarita Salas" grant to Almudena Sanjurjo (UP2021-035), researcher at the Universidad Politecnica de Madrid (UPM), to carry out astay at the Universitat Politecnica de Valencia (UPV)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Cytomegalovirus Reactivation Is Associated With Lower Rates of Hepatocellular Carcinoma Recurrence After Liver Transplantation

  • Aguilera, Victoria
  • Romero Moreno, Sarai
  • Conde, Isabel
  • Rubín, Angel
  • Carvalho-Gomes, Angela
  • Romero, Mario
  • Zamora-Olaya, Javier
  • Gómez-Bravo, Miguel Angel
  • Fuentes-Valenzuela, Esteban
  • Dopazo, Cristina
  • Bilbao, Nikita
  • Gonzalez, Antonio
  • Sanchez-Martinez, Ana
  • Pascual, Sonia
  • Rivera-Esteban, Jesus
  • Martínez-Arenas, Laura
[EN] In patients with hepatocellular carcinoma (HCC), undergoing liver transplantation (LT), cytomegalovirus reactivation (CMVr) may modulate the immune system to prevent tumor recurrence. In this multicenter retrospective study (2010-2015) involving 15 institutions, we assessed the effect of early CMVr in tumor recurrence rates among 771-LT HCC patients with tacrolimus-based immunosuppression (88% men, mean age 58 years). CMV prophylaxis was implemented for 19.7% of patients, while the rest were managed with preemptive therapy. The Milan criteria were met by 88% of patients. Microvascular invasion was present in 12.7% of explanted livers. The serum AFP level before transplantation was 5.1 (3-15) ng/mL. After a median follow-up of 7.4 years, 101 patients (13%) experienced HCC recurrence. CMVr occurred in 235 patients (30.5%) at a median of 41.5 days post-LT and 42 patients (5.6%) had CMV disease. Cumulative exposure to tacrolimus within the first 3 months after LT was similar among patients with and without CMVr. In a multivariate Cox regression analysis, factors associated with an increased rate of HCC recurrence included microvascular invasion [HR:2.82, CI95%:1.55-5.14; p 0.0001], donation after circulatory determination of death [HR:4.43,CI95%:1.52-12.9; p 0.006) and diameter of the main nodule at explant [HR:1.04, CI95%:1.02-1.06; p < 0.001]. Meanwhile CMVr [HR:0.46, CI95%:0.23-0.93, p 0.031] and MELD [HR:0.93, CI95%:0.87-0.99; p0.017] exhibited protective effects. In conclusion, early CMVr may protect against HCC recurrence. The underlying immune mechanisms warrant further investigation., The author(s) declare that financial support was received for the research and/or publication of this article. This study was supported by competitive grants from the Instituto de Salud Carlos III (grant numbers: PI13/01770 and PI18/01759), and co-financed by the European Regional Development Fund "A way to achieve Europe." AC-G and MB were also supported by the Centro de Investigacion Biomedica en Red de Enfermedades Hepaticas y Digestivas (CIBERehd) (https://www.ciberehd.org/), which is funded by the Instituto de Salud Carlos III (co-financed by the European Regional Development Fund). VA has received a grant from the AEEH (Asociacion Espanola para el Estudio del Higado, Spain): Beca de Intensificacion. AC-G received a postdoctoral Fellowship from CiberEHD and MB was supported by competitive grants from the Instituto de Salud Carlos III (grant numbers PI23/00088 and INT24/00021) and by Generalitat Valenciana (grant numbers AICO/2021/035 and CIPROM/2023/16). Victoria Aguilera received a grant from the AEEH "Beca de intensificacion para investigadores" in 2021. LM-A was supported by the Instituto de Salud Carlos III (grant numbers FI20/00033 and MV22/00053).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

The Engineer: enhancing bachelor students English technical engineering vocabulary proficiency with a serious video game, The Engineer: mejora del dominio de vocabulario de ingeniería técnica en inglés entre estudiantes de grado mediante el uso de un videojuego serio

  • Casañ-Pitarch, Ricardo|||0000-0002-1689-7954
[ES] Desde la década de los 2010, el enfoque basado en el juego ha dado lugar a nuevas investigaciones en el campo de la educación. El rápido avance de la tecnología también ha ayudado a introducir dispositivos y aplicaciones digitales más potentes y sofisticadas en el aula. Como resultado, gamificar una asignatura con videojuegos serios es una nueva tendencia al alza en el sector educativo. Por lo tanto, esta investigación se basa en el uso de un videojuego serio que se ha desarrollado con apoyo institucional con el objetivo de reforzar una asignatura de grado universitario. The Engineer es un juego serio diseñado para enseñar inglés para ingeniería y ofrece apoyo a un libro de texto para la asignatura Inglés B2 para Ingenieros Industriales en la Universitat Politècnica de València. El objetivo de la investigación es medir la retención de los estudiantes del nuevo vocabulario sobre ingeniería en inglés después de usar el videojuego y el libro de texto asociado. En nuestro experimento, se dividieron 64 estudiantes de grado en Ingeniería Industrial en un grupo experimental que usó el juego y el libro de texto, y un grupo de control que solo usó el libro de texto. Ambos grupos realizaron una prueba previa y una posterior para medir su conocimiento del vocabulario de ingeniería general y específico. Los resultados mostraron que el uso del juego serio aumentó el tiempo de exposición al idioma extranjero, lo que llevó a mejores resultados entre el grupo experimental. Los estudiantes en el grupo experimental también mostraron más satisfacción con la asignatura. El estudio concluye que los juegos serios pueden ser una herramienta efectiva para el aprendizaje y la enseñanza de idiomas ya que extiende el tiempo de exposición al nuevo contenido y también motiva a los estudiantes debido a su componente lúdico., [EN] Since the decade of 2010, the game-based approach has given rise to new research in education. The quick advance of technology has also helped to introduce more powerful and sophisticated devices and digital applications in the classroom. As a result, gamifying a subject with serious video games is a new rising trend in the educational sector. Therefore, this research is based on the use of a serious video game that has been developed with institutional support and it aims to reinforce a university bachelor's degree subject. The Engineer is a serious game designed to teach English for engineering and gives support to a textbook for the subject English B2 for Industrial Engineers at the Universitat Politecnica de Valencia. This research aimed to measure the learners' acquisition of new engineering vocabulary in English after using the game and the associated textbook. In our experiment, 64 Industrial Engineering degree students were divided into an experimental group that used the game and textbook and a control group that only used the textbook. Both groups took a pre-test and a posttest to measure their knowledge of general and specific engineering vocabulary. Results showed that the use of the serious game increased the exposure time to the foreign language, leading to better results among the experimental group. Students in the experimental group also showed more satisfaction with the course. The study concludes that serious games can be an effective tool for language learning and teaching as it extends the time of exposure to the new content and it also motivates the students due to its playful component., This work is one of the results of the educational innovation and improvement project, A+D 2023 PIME C, reference number: 1920, entitled Enseñanza de inglés para el negocio de la ingeniera industrial a través de simulación, juego y gamificación , funded by the Vice-Rector s Office for Studies, Quality and Accreditation of the Universitat Politècnica de València: 2023 Learning + Teaching Call. Previously, the creation of the video game was founded by the Autonomous Government of the Valencian Community (Spain), Subvencions a grups d investigació emergent, and whose reference number is GV/2021/035, which we should also acknowledge.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Evaluation of image filters for their integration with LSQR computerized tomography reconstruction method

  • CHILLARÓN-PÉREZ, MÓNICA|||0000-0002-7611-8908
  • Vidal-Gimeno, Vicente-Emilio|||0000-0002-2384-7015
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
[EN] In CT (computerized tomography) imaging reconstruction, the acquired sinograms are usually noisy, so artifacts will appear on the resulting images. Thus, it is necessary to find the adequate filters to combine with reconstruction methods that eliminate the greater amount of noise possible without altering in excess the information that the image contains. The present work is focused on the evaluation of several filtering techniques applied in the elimination of artifacts present in CT sinograms. In particular, we analyze the elimination of Gaussian and Speckle noise. The chosen filtering techniques have been studied using four functions designed to measure the quality of the filtered image and compare it with a reference image. In this way, we determine the ideal parameters to carry out the filtering process on the sinograms, prior to the process of reconstruction of the images. Moreover, we study their application on reconstructed noisy images when using noisy sinograms and finally we select the best filter to combine with an iterative reconstruction method in order to test if it improves the quality of the images. With this, we can determine the feasibility of using the selected filtering method for our CT reconstructions with projections reduction, concluding that the bilateral filter is the filter that behaves best with our images. We will test it when combined with our iterative reconstruction method, which consists on the Least Squares QR method in combination with a regularization technique and an acceleration step, showing how integrating this filter with our reconstruction method improves the quality of the CT images., This research has been supported by "Universitat Politecnica de Valencia", "Generalitat Valenciana" under PROMETEO/2018/035 as well as ACIF/2017/075 predoctoral grant co-financed by FEDER and FSE funds, and "Spanish Ministry of Science, Innovation and Universities" under Grant RTI2018-098156-B-C54 co-financed by FEDER funds.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Electrochemical and photoelectrochemical oxidation processes for polystyrene microplastic treatment: BDD anode vs Sb-doped SnO2 ceramic anode coated with a CdFe2O4 photocatalytic layer

  • Medina-Casas, Martha Patricia|||0000-0003-4503-432X
  • Montañés, Maria-Teresa|||0000-0002-2620-6926
  • Pérez-Herranz, Valentín|||0000-0002-4010-0888
  • García Gabaldón, Montserrat|||0000-0003-4254-6733
  • García Martín, Gema
  • Mestre, Sergio
[EN] This study evaluates the efficiency of electrochemical and photoelectrochemical oxidation for the degradation of polystyrene (PS) microspheres using two types of anode materials: a commercial boron-doped diamond (BDD) anode and a ceramic tin oxide anode doped with antimony coated with a photoactive cadmium ferrite (CdFe2O4) layer. Experiments were conducted under different current intensities and illumination conditions to assess degradation efficiency. Both electrodes achieved significant PS removal, reaching up to 99¿% with the BDD anode and up to 96¿% with the cadmium ferrite anode under light exposure and 6¿h of treatment. The photoelectrochemical effect was evident in the cadmium ferrite system due to the photogeneration of additional oxidizing species under visible light. Kinetic parameters were calculated using nonlinear regression according to a modified Chamas model with a Monod-type saturation term. Mineralization was confirmed through total organic carbon analysis, and morphological changes were evidenced by scanning electron microscopy and Raman spectroscopy. The specific energy consumption (SEC) analysis revealed that, although the BDD anode exhibited higher efficiency at low applied current intensities, the cadmium ferrite anode represents a viable alternative due to its high removal efficiencies and energy consumption values comparable to those of the BDD anode at intermediate current intensities and due to its cost-effectiveness associated with its lower fabrication costs. These results highlight the potential of these ceramic anodes as a sustainable alternative for the treatment of wastewater containing microplastics., The authors are greatly thankful to the Agencia Estatal de Investigacion for the financial support through the grant (PID2023-147511OB-C21), funded by MICIU/AEI/10.13039/501100011033 and by ERDF/EU. M. P. Medina-Casas thanks the Generalitat Valenciana (Santiago Grisolía scholarship CIGRIS/2021/035) for funding this research.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of microwave sintering on microstructure and mechanical properties in Y-TZP materials used for dental applications

  • Presenda, Álvaro
  • Moreno, Rodrigo
  • Salvador Moya, Mª Dolores|||0000-0002-4242-478X
  • Penaranda-Foix, Felipe L.|||0000-0003-4012-0763
  • Borrell Tomás, María Amparo|||0000-0003-4292-4538
The aim of this work is to study the application of microwave sintering to consolidate yttria-stabilized zirconia polycrystalline (Y-TZP) ceramics commonly applied in dentistry, so as to obtain highly dense materials and fine microstructure with shorter sintering cycles. Three Y-TZP materials are considered: two commercially available for dental applications and one laboratory studied powder. Microwave sintering was carried out at 1200 and 1300 degrees C for 10 min and conventional sintering at 1300 and 1400 degrees C for 2 h. Relative density, Vickers hardness and fracture toughness values for sintered samples were determined. Microwave sintering results, generally, in improved mechanical properties of the materials in terms of hardness and fracture toughness compared to conventional sintering and, in some cases, at lower sintering temperatures. A finer grain microstructure (final grain size < 250 min) was obtained with microwave sintering for both commercial materials. Fracture toughness values differ significantly between sintering techniques and chosen parameters. These results suggest that microwave heating can be employed to sinter Y-TZP commercial ceramics for dental applications obtaining improving the mechanical properties of the materials with a very important time and energy consumption reduction. Crown Copyright (C) 2015 Published by Elsevier Ltd and Techna Group S.r.l. All rights reserved., The authors would like to thank the financial support received from Universidad Politecnica de Valencia under Project 5P20120677 and Ministerio de Economia y Competitividad (MINECO) and co-funded by ERDF (European Regional Development Funds) through the Project (IEC2012-37532-C02-01). A. Borrell acknowledges the Spanish Ministry of Science and Innovation for her Juan de la Cierva Contract (JCI-2011-10498) and the Generalitat Valenciana for the financial support under Project GV/2014/009. A. Presenda acknowledges the Generalitat Valenciana for his Santiago Grisolia program scholarship (GRISOLLV2013/035). The authors would also like to acknowledge Prof. Dr. M. F. Sold from the Faculty of Medicine and Odontology at the Universidad de Valencia for supplying the commercial materials.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Quorum sensing communication between lipid-based artificial cells

  • Llopis-Lorente, Antoni|||0000-0002-6987-9506
  • Martínez-Máñez, Ramón|||0000-0001-5873-9674
  • Buddingh, Bastiaan C.
  • van Hest, J.C.M.
  • Abdelmohsen, L.K.E.
[EN] Population behavior based on quorum sensing communication is a key property of living microorganisms. Here, we show quorum sensing behavior in an artificial cell population consisting of giant lipid vesicles loaded with sender-receiver machinery (enzymes and responsive biomolecules). Our system allows the examination of the collective output based on cell density, fuel concentration and proximity, which are important factors controlling natural quorum sensing behavior., The authors acknowledge funding from the Dutch Ministry ofEducation, Culture and Science(Gravitation program 024.001.035and Spinoza premium), ERC Advanced Grant Artisym (694120), ERCAdvanced Grant Edison (101052997); the Spanish Ministry ofScience and Innovation, AEI, and FEDER-EU (project PID2021-126304OB-C41), and the GVA (Project CIPROM/2021/007). A. L.-L.thanks the MSCA Cofund project oLife (847675), which has receivedfunding from the EU's Horizon 2020 research and innovationprogram; and the Spanish Ministry of Universities for his MariaZambrano fellowship funded by Next Generation EU from theEuropean Union. Dr W. Altenburg is thanked for supplying GFP.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

High-performance reconstruction of CT medical images by using out-of-core methods in GPU

  • Quintana-Ortí, Gregorio
  • CHILLARÓN-PÉREZ, MÓNICA|||0000-0002-7611-8908
  • Vidal-Gimeno, Vicente-Emilio|||0000-0002-2384-7015
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
[EN] Background and objective: Since Computed Tomography (CT) is one of the most widely used medical imaging tests, it is essential to work on methods that reduce the radiation the patient is exposed to. Although there are several possible approaches to achieve this, we focus on reducing the exposure time through sparse sampling. With this approach, efficient algebraic methods are needed to be able to generate the images in real time, and since their computational cost is high, using high-performance computing is essential. Methods: In this paper we present a GPU (Graphics Processing Unit) software for solving the CT image reconstruction problem using the QR factorization performed with out-of-core (OOC) techniques. This implementation is optimized to reduce the data transfer times between disk, CPU, and GPU, as well as to overlap input/output operations and computations. Results: The experimental study shows that a block cache stored on main page-locked memory is more efficient than using a cache on GPU memory or mirroring it in both GPU and CPU memory. Compared to a CPU version, this implementation is up to 6.5 times faster, providing an improved image quality when compared to other reconstruction methods. Conclusions: The software developed is an optimized version of the QR factorization for GPU that allows the algebraic reconstruction of CT images with high quality and resolution, with a performance that can be compared with state-of-the-art methods used in clinical practice. This approach allows reducing the exposure time of the patient and thus the radiation dose., This research has been supported by the "Universitat Politecnica de Valencia", "Generalitat Valenciana" under PROMETEO/2018/035 and ACIF/2017/075, co-financed by FEDER and FSE funds, and the "Spanish Ministry of Science, Innovation and Universities" under Grant RTI2018-098156-B-C54 co-financed by FEDER funds. The authors would also like to thank Francisco D. Igual (Universidad Complutense de Madrid) for granting access to the volta1 server.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Phenolic profiling of grapes, fermenting samples and wine using UV-Visible spectroscopy with chemometrics

  • Aleixandre Tudo, José|||0000-0002-0586-7370
  • Aleixandre Benavent, José Luís|||0000-0003-1019-4016
  • Nieuwoudt, Helené
  • Olivieri, Alejandro
  • Du toit, Wessel
[EN] Phenolic compounds play and important role on colour, flavour and mouthfeel attributes of wines. The acquisition of information related to phenolic compounds during the winemaking process is therefore becoming a necessity. Ultraviolet-Visible (UV-Vis) spectroscopy appears as an affordable option to monitor phenolic composition and levels during winemaking. To investigate this, a large number of samples collected from industrial fermentations over two vintages as well as commercial wine samples, spanning a wide range of vintages, were analysed for phenolic compounds using high performance liquid chromatography (HPLC). Methyl cellulose precipitable (MCP) tannins, anthocyanins, total phenols and colour density were also analysed. Partial least-squares (PLS) calibration models, based on UV-VIS spectra and reference measurements, were constructed and their performance evaluated in terms of the residual predictive deviation values. The accuracy and robustness of the calibrations were further evaluated by a combined test on slope and intercept, interclass correlation coefficients and standard error of measurement. Limit of detection and limit of quantification of the PLS models were also reported and evaluated. Furthermore, PLS models for an additional data set including 130 grape samples was also investigated for MCP tannins, anthocyanins, total phenols and colour density measurements. Phenolic compounds were extracted following two different protocols, namely wine-like and homogenate methods., The authors gratefully acknowledge the Valid program of the Conselleria de Educacio, Cultura i Esport (APOSTD 2014/035) (Generalitat Valencia), the National Research Foundation (NRF Free-standing postdoctoral fellowship) (grant number 85242) and Winetech South Africa (WdT 13/01 and WdT 15/02) for financial support during the postdoctoral research collaboration between Stellenbosch University and Polytechnic University of Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Mechanical characterization of conventional and non-conventional sintering methods of commercial and lab-synthesized Y-TZP zirconia for dental applications

  • Presenda Barrera, Álvaro
  • Salvador Moya, Mª Dolores|||0000-0002-4242-478X
  • Penaranda-Foix, Felipe L.|||0000-0003-4012-0763
  • Catalá Civera, José Manuel|||0000-0002-0617-1762
  • Borrell Tomás, María Amparo|||0000-0003-4292-4538
[EN] Ceramics for dental applications have become increasingly important in the last decades. Particularly, the introduction of yttria-stabilized zirconia tetragonal polycrystalline (Y-TZP) materials as an alternative to the manufacturing of dental implants and prosthesis has provided a powerful tool to meet the demands required for these replacements in terms of biocompatibility, toughness, hardness and optical properties. Several commercial Y-TZP materials are currently available on the market and strong efforts in research and development facilities are being carried out to improve processing of Y-TZP to fully consolidate odontological pieces. Novel processing methods for ceramic powder sintering, including Y-TZP, aim to reduce processing times and production costs significantly, while maintaining or even improving the resulting microstructure and mechanical properties of the material. One of these methods includes microwave sintering. The purpose of this study is to characterize and compare the resulting properties of Y-TZP materials after conventional sintering and the non-conventional method of microwave heating. In this work one commercial material and one laboratory-synthesized Y-TZP powder are considered. The results suggest that microwave sintering results, generally, in better mechanical properties of the material in terms of hardness and fracture toughness than conventional sintering., The authors would like to thank the financial support received from Universidad Politécnica de Valencia under project SP20120677 and Ministerio de Economía y Competitividad (MINECO) and co-funded by ERDF (European Regional Development Funds) through the project (TEC2012- 37532-C02-01). A. Borrell acknowledges the Spanish Ministry of Science and Innovation for a Juan de la Cierva contract (JCI-2011-10498). A. Presenda acknowledges the Generalitat Valenciana for his Santiago Grisolía program scholarship (REF. GRISOLÍA/2013/035). The authors would also like to acknowledge the SCSIE of the University of Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Statistical comparison of the photoelectrochemical degradation of an antibiotic pollutant using two Sb-doped SnO2 ceramic anodes coated with photoactive CdFe2O4 and ZnFe2O4 layers

  • Medina-Casas, Martha Patricia|||0000-0003-4503-432X
  • Pérez-Herranz, Valentín|||0000-0002-4010-0888
  • Giner-Sanz, Juan José|||0000-0003-0441-6102
  • García Gabaldón, Montserrat|||0000-0003-4254-6733
  • Mestre, Sergio
[EN] In the present study, the electrochemical and photoelectrochemical responses of two Sb-doped SnO2 ceramic anodes were compared in the degradation of an emerging pharmaceutical pollutant, the antibiotic Norfloxacin. One anode was coated with a photocatalytic layer of cadmium ferrite (CdFe2O4), while the other one was coated with zinc ferrite (ZnFe2O4). A multifactorial analysis of variance (ANOVA) was used to assess the effect of the anode material, the applied current intensity and the presence or absence of light, on the degradation and mineralization kinetics. An initial electrochemical characterization of the electrodes was conducted using linear sweep voltammetry and light-pulsed chronoamperometry, confirming the photoactivity of these electrodes. The results revealed that at intermediate potential values (around 1.8 V vs. Ag/AgCl 3 M for cadmium ferrite anode and 2.4 V vs. Ag/AgCl 3 M for zinc ferrite anode), the largest photoactivity were observed. The degradation rate of Norfloxacin was positively influenced by the presence of light and by the increase in current intensity. Additionally, the combined effect of the electrode material and light presence resulted in higher final degradation values of the compound. The degradation kinetics of Norfloxacin were fitted using a mixed-order model (pseudo-zero order and pseudo-first order). The pseudo-zero order kinetic constant was positively influenced by all the considered factors and by the interaction between electrode material and light, and between current intensity and light, which resulted in higher constant values. All the studied factors had a positive effect on Norfloxacin mineralization. Additionally, the combined effect of the electrode material and current intensity showed a significant improvement in the final mineralization of the compound. Furthermore, it was confirmed that the mineralization current efficiency (MCE) decreases with increasing applied current intensity, but this decrease is lower when the electrode is exposed to light., The authors are greatly thankful to the Generalitat Valenciana (Project GVA-THINKINAZUL/2021/013), the European Union NextGeneration EU/PRTR. M. P. Medina-Casas thanks the Generalitat Valenciana (Santiago Grisolía scholarship CIGRIS/2021/035) for funding this research. J.J. Giner-Sanz is very grateful to the Ministerio de Ciencia e Innovacion, ¿ to the Next Generation EU, and to the Agencia Estatal de Investigacion, ¿ for their support by a Juan de la CiervaIncorporacion ¿ fellowship IJC2020-044087-I funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Recovering a thatched earthen hut in the lagoon of Valencia

  • Vegas López-Manzanares, Fernando|||0000-0003-0315-6839
  • Mileto, Camilla|||0000-0002-6987-8802
[EN] The Valencia Lagoon has been home to vernacular constructions built with the mud and fibres available in these wetlands since ancient times. They are probably the last evolved vestiges of the primitive prehistoric huts that populated this place and the area surrounding the city of Valencia. It is estimated that in the mid-19th century, several tens of thousands of these huts remained. Fires, arson, new building regulations that prohibited new huts or even prevented their repair, the association with the poverty of yesteryear, and a misunderstood concept of progress reduced this number to the 50 huts that are still standing. The traditional wisdom reflected in the design, which incorporates highly effective cross ventilation that is optimal in both summer and winter weather, is disappearing, although in many ways, it could be an example offering lessons to contemporary architecture. This article presents the conservation and adaptive reuse of an 18th-century thatched earthen hut in a state of imminent collapse, from its structural and material degradation to the recovery and reinterpretation of the traditional materials and techniques that have allowed for it to be assigned a public function as the headquarters of an association. This adaptive reuse has shown that it is possible to comply with current regulations, including fire regulations, in a building with a thatched roof and, at the same time, respect its charm and traditional character.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Condiciones de las redes interorganizativas para la innovación en áreas rurales, Conditions of interorganizational networks for innovation in rural areas

  • Nogueira Dias, Cleidson
  • Hoffmann, Valmir Emil
  • Martínez-Fernández, María Teresa
[EN] The objective is to investigate which are the drivers of the formation of inter-organizational cooperation networks that contribute to the achievement of innovation performance in rural areas. Regarding the methodological aspects, the research chose Qualitative Comparative Analysis (QCA) and Content Analysis for research with the leaders of research, development and innovation networks of the most important agri-food technologies in Brazil and Spain. Our findings suggest that relevant reasons that influence the performance of the innovation are Legitimacy, Flexibility and Efficiency., [ES] El objetivo consiste en investigar cuáles son los factores determinantes para la formación de redes interorganizativas de cooperación que contribuyen a la innovación en las áreas rurales. Para ello, se ha realizado una investigación cuyo objeto de estudio han sido las instituciones de investigación en el sector agropecuario de dos países (España y Brasil) utilizando dos técnicas de investigación como son el Análisis Cualitativo Comparativo (QCA) y el Análisis de Contenido. Los resultados evidencian cómo las razones que influyen en el desempeño de la innovación son la Legitimidad, la Flexibilidad y la Eficiencia., Esta investigación fue apoyada económicamente por la Coordinación de Mejora de Personal de Nivel Superior - CAPES, proyecto PGCI 035/2013, Brasil, y por el Ministerio de Ciencia e Innovación, Proyectos de I+D+i Generación del Conocimiento y Retos Investigación 2018, proyecto nº RTI2018-100823-B-I00.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Analysis and prediction of injury severity in single micromobility crashes with Random Forest

  • Almudena Sanjurjo-de-No
  • Pérez Zuriaga, Ana María|||0000-0002-8434-1106
  • García García, Alfredo|||0000-0003-1345-3685
[EN] Urban micromobility represents a significant shift towards sustainable cities, underscoring the paramount importance of its safety. With the surge in micromobility adoption, collisions involving micromobility devices, such as bicycles and e-scooters, have surged in recent years. The second most common crash type involving these vehicles is one that only involves a micromobility vehicle (single micromobility crashes). This study analyzed 6030 single micromobility crashes that occurred in Spanish urban areas from 2016 to 2020. The Random Forest method-ology was applied to create a classification model for the purpose of characterizing these crashes, predicting their injury severity, and identifying the primary influencing factors. To address the issue of imbalanced data, resulting from the relatively smaller dataset of fatal and seriously injured crashes compared to slightly injured ones, the Synthetic Minority Oversampling Technique (SMOTE) was applied. The results indicate that certain behaviors, such as not wearing a helmet, riding for leisure, and instances of speeding violations, have the potential to increase injury severity. Additionally, crashes occurring at intersections or at cycle lanes with bad pavement conditions are likely to result in more severe outcomes. Furthermore, the concurrent presence of various other factors also contributes to an escalation in crash injury severity. These findings have the potential to provide valuable insights to authorities, assisting them in the decision-making process to enhance micromobility safety and thereby promoting the creation of more equitable and sustainable urban environments., This research is part of the research project PID2019-111744RB-I00, funded by MCIN/AEI/10.13039/501100011033. Likewise, this research has been partially funded by the European Union-NextGenerationEU (RD 289/2021) through the "Margarita Salas" grant awarded to Almudena Sanjurjo (UP2021-035) , a researcher at the Univeridad Polite cnica de Madrid (UPM) to support her stay at the Universitat Polite cnica de Valencia (UPV) . Finally, the authors would like to also thank to the Direcci on General de Trafico (DGT) for providing the databases.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

FibroScan compared to liver biopsy for accurately staging recurrent hepatic steatosis and fibrosis after transplantation for MASH

  • Martínez-Arenas, Laura
  • Vinaixa, Carmen
  • Conde, Isabel
  • Lorente, Sara
  • Díaz-Fontenla, Fernando
  • Marques, Patrice
  • Pérez-Rojas, Judith
  • Montalvá, Eva
  • Carvalho-Gomes, Ângela
  • Berenguer, Marina
[EN] Background and aims: Metabolic dysfunction-associated steatotic liver disease (MASLD) recurrence after liver transplantation (LT) seems unavoidable and gradual. We aimed to evaluate the diagnostic accuracy in the post-LT setting of patients transplanted for metabolic dysfunction-associated steatohepatitis (MASH) of recurrent hepatic steatosis and fibrosis identified with FibroScan, compared to biopsy findings. Methods: This prospective cohort study included adults transplanted for MASH between 2010 and 2022 in three LT centres in Spain who underwent FibroScan and biopsy at least 1-year after LT. Results: In total, 44 patients transplanted for MASH after LT were included. The median time from LT to biopsy and FibroScan was 24.5 (interquartile range [IQR]:16-46) and 26.0 (IQR: 16.8-41.5) months, respectively. The median time between biopsy and FibroScan was 2.0 (IQR: 0-5) months. On FibroScan, significant steatosis was diagnosed in about half of the patients (n = 21, 47.7%), yet advanced fibrosis in only two cases (4.6%). On biopsy, a quarter of biopsied patients (n = 11, 25%) had a MASH diagnosis, two (4.6%) with significant fibrosis and one (2.3%) with cirrhosis. All patients with liver stiffness measurement (LSM) values <8 kPa (n = 35, 79.5%) had a fibrosis stage ¿F1 (negative predictive value = 100%). The combination of post-LT hypertension (odds ratio [OR]: 12.0, 95% confidence interval [CI]: 1.8-80.4, p = .010) and post-LT dyslipidaemia (OR: 7.9, 95% CI: 1.3-47.1, p = .024) with LSM (OR: 1.7, 95% CI: 1.1-2.8, p = .030) was independently associated with MASLD. Conclusions: Although biopsy remains the gold standard for detecting fibrosis, our results suggest that LSM values <8 kPa after LT for MASH are strongly correlated with absence of significant/advanced fibrosis., Generalitat Valenciana; Instituto de Salud Carlos III; Centro de Investigacion Biomedica en Red de Enfermedades Hepaticas y Digestivas; Sociedad Espanola de Trasplante Hepatico This research was funded by the Instituto de Salud Carlos III and co- funded by European Regional Development Fund 'A way to make Europe' (grant PI19/01360 to MB, grant INT20/00061 to MB, grant FI20/00033 to LMA, grant MV22/00053 to LMA, grant CD22/00045 to PM, grant PI23/00088 to MB, and grant INT24/00021 to MB), by the Generalitat Valenciana (grant AICO/2021/035 to MB, grant CIGE/2023/073 to PM, and grant CIPROM/2023/16 to MB), by the CIBER -Consorcio Centro de Investigacion Biomedica en Red- [CB06/04/0065], Instituto de Salud Carlos III, Ministerio de Ciencia e Innovacion and Union Europea-European Regional Development Fund, and by the Spanish Society of Liver Transplantation (SETH, grant 2022/295 to MB).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Multidimensional Comparative Framework for Assessing the Refurbishment of a Fisherman s Dwelling in Valencia, Spain

  • Vegas López-Manzanares, Fernando|||0000-0003-0315-6839
  • Mileto, Camilla|||0000-0002-6987-8802
  • Hueto-Escobar, Alicia|||0000-0003-4628-6545
  • Manzano-Fernández, Sergio|||0000-0001-7936-1324
  • Valcuende Payá, Manuel Octavio|||0000-0002-9967-1554
[EN] The refurbishment of protected traditional dwellings requires balancing heritage conservation with current demands for habitability, energy efficiency, environmental sustainability and economic viability. The aim of this study is to develop a multidimensional comparative framework capable of identifying synergies and trade-offs between these requirements at the scale of individual construction decisions. This framework is applied to a traditional fisherman¿s dwelling in the Cabanyal-Canyamelar district of Valencia, refurbished in 2022. Eight construction actions were assessed through four complementary dimensions: heritage compatibility, embodied environmental impacts assessed through Life Cycle Assessment product and transport modules A1¿A4 (excluding use, maintenance and end-of-life stages), direct construction costs, and four months of post-intervention hygrothermal monitoring. In this case, conservation, repair and reuse measures generally achieved the most balanced performance and lower initial direct costs than their industrial equivalents, mainly due to reduced expenditure on new materials. In contrast, modification of the courtyard enclosure emerged as the main point of conflict, combining lower heritage compatibility with high embodied environmental impacts and direct cost. Post-intervention monitoring showed greater thermal stability in the east-facing area during the study period, although high relative humidity persisted. The framework makes synergies and conflicts between individual construction decisions explicit without aggregating the dimensions into a single score, thereby supporting more transparent decision-making in protected traditional dwellings., This work forms part of the research project RE-HABITAT Restauración y rehabilitación sostenible de viviendas tradicionales en contextos históricos , funded by the Regional Ministry of Innovation, Universities, Science and the Digital Society Valencian Regional Government (Ref. CIAICO/2022/035).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Assessment Methodology for Physical Vulnerability of Vernacular Architecture in Areas Affected by Depopulation: The Case of Comunidad Valenciana, Spain

  • Tortajada-Montalva, Eva|||0000-0001-8832-4218
  • Mileto, Camilla|||0000-0002-6987-8802
  • Vegas López-Manzanares, Fernando|||0000-0003-0315-6839
[EN] The intensity with which the phenomenon of depopulation has affected rural municipalities in Spain between 1950 and 2022 has led to a loss in the intergenerational transmission of traditional knowledge, values and customs. Sociocultural loss entails associated physical risks: the abandonment, demolition, and loss of vernacular architecture. This research analyzes the evolution of this type of architecture in a period of acute depopulation and its current state of conservation. A total of 180 case studies in the region of Comunidad Valenciana are analyzed through four factors affecting the physical vulnerability of dwellings: year of construction, state of conservation, type of use, and a combination of all three. Data management software is used to combine all the information and produce the results in a tabular and graphical format, while the Geographic Information System is used to draw up risk maps showing the results. These results are then divided into analysis groups created according to the degree of depopulation observed in the years mentioned. This made it possible to identify the relationship between depopulation and the conservation of vernacular architecture, showing the risk level for each case study, and thus creating an analysis methodology applicable in other territories affected by depopulation at a national and international level., This research was supported by Subvenciones para la contratación de personal investigador predoctoral (ACIF/2021/421) financiado por la Generalitat Valenciana y el Fondo Social Europeo and is part of the research project RE-HABITAT Restauración y rehabilitación sostenible de viviendas tradicionales en contextos históricos funded by the R&D&i programme of the Department for Innovation, Universities, Science and Digital Society of the Generalitat Valenciana (CIAICO/2022/035).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Trapping of three-dimensional electrons and transition to two-dimensional transport in the three-dimensional topological insulator Bi2Se3 under high pressure

  • Segura, A.
  • Panchal, V.
  • Sánchez-Royo, J. F.
  • Marín-Borrás, V.
  • Muñoz-Sanjosé, V.
  • Rodríguez-Hernández, P.
  • Muñoz, A.
  • Pérez-González, E.
  • González, J.
  • Manjón, Francisco-Javier|||0000-0002-3926-1705
[EN] This paper reports an experimental and theoretical investigation on the electronic structure of bismuth selenide (Bi2Se3) up to 9 GPa. The optical gap of Bi2Se3 increases from 0.17 eV at ambient pressure to 0.45 eV at 8 GPa. The quenching of the Burstein-Moss effect in degenerate samples and the shift of the free-carrier plasma frequency to lower energies reveal a quick decrease of the bulk three-dimensional (3D) electron concentration under pressure. On increasing pressure the behavior of Hall electron concentration and mobility depends on the sample thickness, consistently with a gradual transition from mainly 3D transport at ambient pressure to mainly two-dimensional (2D) transport at high pressure. Two-carrier transport equations confirm the trapping of high-mobility 3D electrons, an effect that can be related to a shallow-to-deep transformation of donor levels, associated with a change in the ordering of the conduction band minima. The high apparent areal density and low electron mobility of 2D electrons are not compatible with their expected properties in a Dirac cone. Measured transport parameters at high pressure are most probably affected by the presence of holes, either in an accumulation surface layer or as minority carriers in the bulk. ©2012 American Physical Society, This work has been done under financial support from Spanish MICINN under Grants No. MAT2008-06873-C02-02, No. MAT2007-66129, No. MAT2010-21270-C04-03/04, No. CSD2007-00045, and Prometeo No. GV2011/035. The supercomputer time has been provided by the Red Espanola de Supercomputacion (RES) and the MALTA cluster.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Monte Carlo code application to the study of 3D neutrons distribution in a radiotherapy bunker and validation with experimental measurements

  • Juste-Vidal, Belen-Jeanne|||0000-0003-1978-3765
  • Miró Herrero, Rafael|||0000-0003-1012-0869
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
  • Morató-Rafet, Sergio
  • Garcia, C.
[EN] Different methods exist to verify bunkers design for radiation therapy medical facilities; analytical methods based on simplified equations and Monte Carlo methods. One of the main purposes of this work is to present the advantages of using Monte Carlo simulation to verify radiotherapy bunker shielding design. This methodology is more accurate and characterizes not only the fluence and dose three-dimensionally, but also the energy spectrum of particles generated by the LinAc. The other main purpose of the work is to analyze the importance of the generated photoneutrons when the LinAc emits high-energy photon beams (above 8 MeV), since numerous studies have found that these neutrons can expose the patient and clinical staff to non-negligible dose. The main novelty introduced by this work, is the creation of more realistic geometry simulation models to represent the radiotherapy facility by using CAD and meshes technologies which can be imported to MCNP6 Monte Carlo code. Results obtained using these bunker simulation models have been validated experimentally at the Hospital Universitari i Politècnic La Fe de Valencia facilities using two different neutron detectors; the neutron meter LB 6411 (designed between Berthold and Karlsruhe Research Center) and neutron detector model 42¿41L (Ludlum, Prescila). Neutron dose results obtained with Monte Carlo and those measured experimentally fit correctly, validating this analysis methodology.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

De la prehistoria a la arquitectura vernácula: una revisión diacrónica de la tierra apilada en la península ibérica y su pervivencia como técnica combinada, From Prehistory to vernacular architecture: a diachronic review of piled earth in the Iberian Peninsula and its survival as a combined technique

  • Mileto, Camilla|||0000-0002-6987-8802
  • Vegas López-Manzanares, Fernando|||0000-0003-0315-6839
  • Manzano-Fernández, Sergio|||0000-0001-7936-1324
  • Hueto-Escobar, Alicia|||0000-0003-4628-6545
[EN] Despite the widespread use of earthen construction across the Iberian Peninsula, the employment of hand-molded earth as a building material has traditionally been regarded as a scarcely documented solution. Its extensive use in adjacent regions, such as France or North Africa, raises questions about its limited territorial presence from past societies to the present day. This research addresses this issue, first, through a statistical review of archaeological and pre-industrial architectural databases, aimed at quantifying this scarcity diachronically and critically assessing how readily it can be identified in the available record. Second, by applying stratigraphic analyses to the few existing cases in which the technique appears in combination with others, as in the Valencian huts and the half-timber structures of the province of Burgos. Taken together, these analyses quantify the current scenario of dispersal, revealing patterns of absence and invisibility comparable to the archaeological record, while also identifying newly preserved examples of pre-industrial hand-molded earthen techniques, primarily used as a complementary technique and to resolve irregular geometries. In doing so, the study highlights the marginal pattern of use beyond the persistent terminological and identification issues., Las bases de datos que fundamentan la investigación han sido desarrolladas en el marco de los proyectos RES-Tapia. La restauración de la arquitectura de tapia en la Península Ibérica. Criterios, técnicas, resultados y perspectivas , financiado por el Ministerio de Economía y Competitividad (BIA 2010-18921); SOS-Tierra. La restauración y rehabilitación de arquitectura tradicional de tierra en la Península Ibérica. Líneas guía y herramientas para una intervención sostenible , financiado por el Ministerio de Economía y Competitividad (BIA 2014-55924-R); y RISK-Terra. La arquitectura de tierra en la Península Ibérica: Estudio de los riesgos naturales, sociales y antrópicos y estrategias de intervención e incremento de la resiliencia , financiado por la Agencia Estatal de Investigación Ministerio de Ciencia, Innovación y Universidades (RTI2018-095302-B-I00); así como por las tesis doctorales financiadas por el Ministerio de Ciencia e Innovación del Gobierno de España (PRE2019- 089629; Ref. 501 FPU18/01596). Los estudios, levantamientos y restauraciones que han descubierto la tierra apilada de la barraca de los Aranda se han realizado en el marco de la filosofía y actividades desarrolladas por los autores en los proyectos de investigación EARTH 4 FUTURE Sustainable reuse of earthen architecture and its lessons for contemporary architecture , financiado por el Ministerio de Ciencia e Innovación del Gobierno de España (PID2022-139154OB-I00); y RE-HABITAT Restauración y rehabilitación sostenible de viviendas tradicionales en contextos históricos , financiado por el Departamento de Innovación, Universidades, Ciencia y Sociedad Digital de la Generalitat Valenciana (CIAICO/2022/035).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Application of NEMA protocols to verify GATE models based on the Digital Biograph Vision and the Biograph Vision Quadra scanners

  • Peña-Acosta, Miriam Magela
  • Gallardo Bermell, Sergio|||0000-0002-3703-9983
  • M. Lorduy|||0000-0002-8942-8278
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
[EN] Purpose: The Monte Carlo method is an effective tool to simulate and verify PET systems. Furthermore, it can help in the design and optimization of new medical imaging devices and algorithms. In this framework, the goal of this work is to verify the GATE toolkit performance when applied to simulate two Siemens Healthineers PET scanners: a standard axial field-of-view Biograph Vision scanner and the new long axial field-of-view Biograph Vision Quadra scanner. Methods: The simulation toolkit GATE is based on GEANT4, comprising its main functionalities and a set of domainspecific features in the field of medical physics. To accomplish our purpose, the guidelines described in the NEMA NU 2-2018 protocol are reproduced. Then the simulated results are compared to experimental data available in the literature for both PET scanners. The assessment of the models includes different studies of sensitivity, count rate performances, spatial resolution and image quality. These tests are intended to evaluate the image quality of PET devices. Results: In the spatial resolution test, relative errors lower than 8% are obtained between the experiments and GATE models. The sensitivity is 17.2 cps/kBq (Vision) and 175.9 cps/kBq (Quadra), representing relative differences with the experiment of 6% and 0.3%, respectively. Deviations from peak NECR are less than 9%. In the Image Quality test, the contrast recovery coefficient for hot spheres, with 8 iterations and 5 subsets, ranges between 57-83% for Vision and 54-86% for Quadra. These values represent a maximum deviation between the simulations and the experiments of 10% for the Quadra scanner. In the case of the Vision scanner, the highest difference is observed for the 10 mm sphere ( 38%) due to the higher contrast recovery of the experiment caused by the Gibbs artifact from the use of PSF reconstruction. Conclusions: The results of the simulations have provided evidence of a good agreement between the experimental data and the results obtained with GATE. Thus, this work supports the capability of this MC toolkit to accurately simulate the models of the Vision and Quadra scanners. This study has laid the basis for further research in this field and has identified several areas that could be explored., The authors are indebted to the Santiago Grisolía Program (GRISOLIAP/2021/186) for its training research personnel and the support of the BIORA (PROMETEO/2018/035) project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Time-dependent simplified spherical harmonics formulations for a nuclear reactor system

  • Carreño, Amanda|||0000-0003-2302-1157
  • Vidal-Ferràndiz, Antoni|||0000-0001-5449-7356
  • Ginestar Peiro, Damián|||0000-0003-1243-6648
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
[EN] The steady-state simplified spherical harmonics equations (SPNequations) are a higher order approximation to the neutron transport equations than the neutron diffusion equation that also have reasonable computational demands. This work extends these results for the analysis of transients by comparing of two formulations of time-dependent SPN equations considering different treatments for the time derivatives of the field moments. The first is the full system of equations and the second is a diffusive approximation of these equations that neglects the time derivatives of the odd moments. The spatial discretization of these methodologies is made by using a high order finite element method. For the time discretization, a semi-implicit Euler method is used. Numerical results show that the diffusive formulation for the time-dependent simplified spherical harmonics equations does not present a relevant loss of accuracy while being more computationally efficient than the full system, This work has been partially supported by Spanish Ministerio de Economia y Competitividad under projects ENE2017-89029-P and MTM2017-85669-P. Furthermore, this work has been financed by the Generalitat Valenciana under the project PROMETEO/2018/035
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Chemical Cascading Between Polymersomal Nanoreactor Populations

  • Altay, Yigit
  • Abdelmohsen, Loai K. E. A.
  • van Hest, Jan C.M.
  • Llopis-Lorente, Antoni|||0000-0002-6987-9506
[EN] Harnessing interactions of functional nano-compartments to generate larger particle assemblies allows studying diverse biological behaviors based on their population states and can lead to the development of smart materials. Herein, thiol-functionalized polymersome nanoreactors are utilized as responsive organelle-like nano-compartments-with inherent capacity to associate into larger aggregates in response to change in the redox state of their environment-to study the kinetics of cascade reactions and explore functions of their collective under different population states. Two nanoreactor populations, glucose oxidase- and horseradish peroxidase-loaded polymersomes, are prepared, and the results of their cascading upon addition of glucose are investigated. The kinetics of resorufin production in associated polymersomes and non-associated polymersome populations are compared, observing a decreased rate upon association. For the associated populations, faster chemical cascading is found when the two types of nanoreactors are associated in a concerted step, as compared to sequential association. The addition of competing agents such as catalase impacts the communication between non-associated polymersomes, whereas such an effect is less pronounced for the associated ones. Altogether, the results showcase the impact of collective associations on enzymatic cascading between organelle-like nanoreactors., Y.A. and A.L.-L. contributed equally to this work. The authors would like to acknowledge the support from the Dutch Ministry of Education, Culture, and Science (Gravitation program 024.001.035 and Spinoza premium) and the ERC Advanced Grant (Artisym 694120).A.L.-L. acknowledges support from the MSCA Cofund project oLife, which has received funding from the European Union's Horizon 2020 research and innovation program under the Grant Agreement 847675; and the Maria Zambrano Program from the Spanish Government funded by NextGenerationEU from the European Union. Dr. Imke Pijpers is thanked for cryo-TEM imaging. Dr. Pascal Welzen is acknowledged for advice and useful discussion on polymer and polymersome preparation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

On exact series solution for strongly coupled mixed parabolic boundary value problems

  • Soler Basauri, Vicente
  • Verdoy González, José Antonio
  • Defez Candel, Emilio|||0000-0002-3303-6371
This paper continues with the construction of the exact solution for parabolic coupled of the type u(t) = Au-xx, A(1)u(0, t) + B(1)u(x) (0, t) = 0, A(2)u(l, t) + B(2)u(x) (l, t) = 0, 0 < x < 1, t > 0, and u(x, 0) = f(x) where A(1), A(2), B-1, and B-2 are arbitrary matrices for which the block matrix ((A1)(A2) (B1)(B2)) is nonsingular, and A is a positive stable matrix. Although this problem has been solved in the literature (Soler et al., 2013), in this work we are using completely new conditions., This work has been supported by the Generalitat Valenciana GV/2013/035.
Repositori Institucional UIB
Publication Artículo científico (JournalArticle)

A comprehensive study on fidelity metrics for XAI

  • Miró-Nicolau, Miquel
  • Jaume-i-Capó, Antoni
  • Moyà-Alcover, Gabriel
[eng] The use of eXplainable Artificial Intelligence (XAI) systems has introduced a set of challenges that need resolution. Herein, we focus on how to correctly select an XAI method, an open questions within the field. The inherent difficulty of this task is due to the lack of a ground truth. Several authors have proposed metrics to approximate the fidelity of different XAI methods. These metrics lack verification and have concerning disagreements. In this study, we proposed a novel methodology to verify fidelity metrics, using transparent models. These models allowed us to obtain explanations with perfect fidelity. Our proposal constitutes the first objective benchmark for these metrics, facilitating a comparison of existing proposals, and surpassing existing methods. We applied our benchmark to assess the existing fidelity metrics in two different experiments, each using public datasets comprising 52,000 images. The images from these datasets had a size a 128 by 128 pixels and were synthetic data that simplified the training process. {\color{black} We identified that two fidelity metrics, Faithfulness Estimate and Faithfulness Correlation, obtained the expected perfect results for linear models, showing their ability to approximate fidelity for this kind of methods. However, when present with non-linear models, as the ones most used in the state-of-the-art, }all metric values, indicated a lack of fidelity, with the best one showing a 30 \% deviation from the expected values for perfect explanation. Our experimentation led us to conclude that the current fidelity metrics are not reliable enough to be used in real scenarios. From this finding, we deemed it necessary to development new metrics, to avoid the detected problems, and we recommend the usage of our proposal as a benchmark within the scientific community to address these limitations.
DAU Arxiu Digital de la Universitat Ramon Llull
Publication Artículo científico (JournalArticle)

Broadband and Compact Circularly Polarized MIMO Antenna With Concentric Rings and Oval Slots for 5G Application

  • Kulkarni, Jayshri
  • Sim, Chow-Yen-Desmond
  • Gangwar, Ravi Kumar
  • Anguera, Jaume
A broadband and compact size circularly polarized (CP) two-port multiple input multiple output (MIMO) antenna with a footprint of 25 mm ×20 mm is investigated. The designed oval-shaped MIMO antenna employs concentric rings with oval slots (CROS), along with a circular radiator and two open-ended parallel protruded stubs. The CP radiation is achieved by embedding three oval slots, in which two of them are deployed at the left and right side of the concentric rings, whereas the third one is deployed at the top section of the concentric rings. The measured 10-dB impedance bandwidth of the proposed MIMO antenna was 46.30% (3.12–5.00 GHz), and its corresponding 3-dB axial ratio bandwidth (ARBW) was 41.34% (3.30–5.02 GHz). Furthermore, very wide beamwidths of 137∘±0.2 and 154∘±0.2 were measured in the right-hand circular polarization (RHCP) and left-hand circular polarization (LHCP) radiation patterns, respectively. The minimum achieved isolation between the antenna elements is 18.50 dB without using any additional decoupling structure, and the calculated envelope correlation coefficient (ECC) < 0.03, info:eu-repo/semantics/publishedVersion
DAU Arxiu Digital de la Universitat Ramon Llull
Publication Artículo científico (JournalArticle)

Characterisation and prognosis of undiagnosed chronic obstructive pulmonary disease patients at their first hospitalisation

  • Balcells Vilarnau, Eva
  • Gimeno-Santos, Elena
  • De Batlle, Jordi
  • Ramon, Maria Antonia
  • Rodríguez, Esther
  • Benet Mora, Marta
  • Farrero, Eva
  • Ferrer, Antoni
  • Guerra, Stefano
  • Ferrer, Jaume
  • Sauleda, Jaume
  • Barberà, Joan A.
  • Agustí, Àlvar
  • Rodríguez-Roisin, Robert
  • Gea, Joaquim
  • Antó, Josep M.
  • Garcia Aymerich, Judith
Background Under-diagnosis of COPD is an important unmet medical need. We investigated the characteristics and prognosis of hospitalised patients with undiagnosed COPD. Methods The PAC-COPD cohort included 342 COPD patients hospitalised for the first time for an exacerbation of COPD (2004–2006). Patients were extensively characterised using sociodemographic, clinical and functional variables, and the cohort was followed-up through 2008. We defined “undiagnosed COPD” by the absence of any self-reported respiratory disease and regular use of any pharmacological respiratory treatment. Results Undiagnosed COPD was present in 34% of patients. They were younger (mean age 66 vs. 68 years, p = 0.03), reported fewer symptoms (mMRC dyspnoea score, 2.1 vs. 2.6, p < 0.01), and had a better health status (SGRQ total score, 29 vs. 40, p < 0.01), milder airflow limitation (FEV1% ref., 59% vs. 49%, p < 0.01), and fewer comorbidities (two or more, 40% vs. 56%, p < 0.01) when compared with patients with an established COPD diagnosis. Three months after hospital discharge, 16% of the undiagnosed COPD patients had stopped smoking (vs. 5%, p = 0.019). During follow-up, annual hospitalisation rates were lower in undiagnosed COPD patients (0.14 vs. 0.25, p < 0.01); however, this difference disappeared after adjustment for severity. Mortality was similar in both groups. Conclusions Undiagnosed COPD patients have less severe disease and lower risk of re-hospitalisation when compared with hospitalised patients with known COPD., info:eu-repo/semantics/publishedVersion
Helvia. Repositorio Institucional de la Universidad de Córdoba
Publication Artículo científico (JournalArticle)

Situación de la expresión corporal en el grado en educación primaria. Opinión del profesorado (Situation of corporal expression in the degree in primary education. Teachers' opinions), Situation of Corporal Expression in the degree in Primary Education. Teachers' opinions

  • Armada Crespo, José Manuel
  • Benítez Sillero, Juan de Dios
  • Pérez-Calzado, Elena
  • Gil-Ares, Javier
La Expresión Corporal es uno de los contenidos de la Educación Física que más particularidades presenta en la formación del profesorado, pudiendomostrar carencias formativas en la formación inicial del profesorado de Primaria. La opinión del profesorado universitario de esta disciplina se plantea como una evaluación a tener en cuenta para comprender la situación actual y podermejorar el proceso de enseñanza y aprendizaje.Con el objetivo de conocer la opinión que tiene sobre la Expresión Corporalel profesorado universitario que imparte la asignatura vinculada en el Grado en Educación Primaria, se utilizóun cuestionario elaborado ad hoc yvalidadomediante juicio de expertos. Estácompuesto de 32 preguntas cerradas, analizadas mediante el programa SPSS, y sietepregun-tas abiertas, analizadas mediante el programaQSRNvivo.En los resultados destaca un alto grado de acuerdo entre el profesorado en referencia a la escasa presencia de la Expresión Corporalen los planes de estudios. También se encontróun alto grado de heterogenei-dad, pese a lo que pueden encontrarse ciertos puntos de encuentro en la mayoría de las opiniones, destacando la valoración positiva de la actitud del alumnado y su adecuada formación tras cursar la asignatura vinculada.La opinión generalsuele coincidir con los estudios previos, destacando la poca proyección de la materia sobre el ámbito educativo en favor del artístico, pese a considerarse una disciplina que desarrolla la mayor parte de las Competencias Clave., Corporal Expression is one of the contents of Physical Education that presents more particularities in teacher training, being able to show formative deficiencies in the initial training of Primary School teachers. The opinion of the university teaching staff in this discipline is considered as an evaluation to be taken into account in order to understand the current situation and to be able to improve the teaching and learning process. In order to find out the opinion of the university teaching staff who teach the related subject on the Degree in Primary Education about Corporal Expression, an ad hoc questionnaire was used, validated by means of expert judgement. It consists of 32 closed questions, analysed using the SPSS programme, and seven open questions, analysed using the QSR Nvivoprogramme. The results show a high degree of agreementamong the teaching staff with regard to the scarce presence of Corporal Expressionin the curricula. A high degree of heterogeneity was also found, despite the fact that certain points of agreement can be found in most of the opinions, highlighting the positive assessment of the students' attitude and their appropriate training after taking the related subject. The general opinion tends to coincide with previous studies, highlighting the lack of projection of the subject in the educational field in favour of the artistic field, despite being considered a discipline that develops most of the Key Competences.
Helvia. Repositorio Institucional de la Universidad de Córdoba
Publication Artículo científico (JournalArticle)

Análisis de la expresión corporal en el grado en Educación Primaria, Analysis of Corporal Expression in the Degree in Primary Education

  • Gil-Ares, Javier
  • Armada Crespo, José Manuel
La expresión corporal es un contenido consolidado dentro de la educación física en España. Sin embargo, hay una deficiencia histórica en la formación que las y los futuros docentes reciben respecto de la misma. La armonización de titulaciones establecida tras la construcción del Espacio Europeo de Educación Superior ha supuesto una reducción de créditos en la formación del grado en Educación Primaria, mención de Educación Física, respecto de la anterior diplomatura en Magisterio, especialidad Educación Física, lo que podría haber agravado la situación descrita anteriormente. Se ha pretendido analizar la situación en la que la expresión corporal ha quedado como contenido formativo en la titulación de grado de las universidades españolas en la actualidad. Para ello se han analizado los planes de estudios de los 113 centros universitarios que en el curso 2021/22 impartían la titulación de grado en Educación Primaria, seleccionando aquellas asignaturas que incluyeran la expresión corporal entre sus contenidos. Los resultados mostraron una escasa formación que, en algunos casos, resulta inexistente, en otros aglutina varias materias en una misma asignatura, siendo menos de la mitad los centros que planteaban al menos una asignatura en exclusiva para esta disciplina. En consecuencia, no quedaba garantizada una formación de calidad que hiciera frente a las necesidades laborales del alumnado egresado en su futuro como docentes, al menos en lo que se refiere a la expresión corporal como contenido de Educación Física en la etapa educativa de primaria., Corporal expression is a well established component of physical education in Spain. However, there is a historical deficiency in the training that prospective teachers receive in this regard. The standardisation of degrees introduced after the establishment of the European Higher Education Area has led to a credit reduction in the degree in Primary Education, specialising in Physical Education, compared to the previous degree in Teaching, specialising in Physical Education, which may have aggravated the situation described above. The aim of this study was to analyse the current situation in which corporal expression has been included as a training component in undergraduate degree courses at Spanish universities. For this purpose, the syllabuses of the 113 university centres that offered a degree in Primary Education in the 2021/22 academic year were analysed, specifically selecting those subjects that included corporal expression among their contents. The results revealed a lack of training; in some cases training was non-existent, and in others it combined several topics within the same subject, with less than half of the centres offering at least one subject exclusively dedicated to this discipline. Consequently, there was no guarantee of quality training to meet the employment needs of graduates in their future as teachers, at least as far as corporal expression as a physical education content in primary education is concerned.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Mannose-binding lectin promotes blood-brain barrier breakdown and exacerbates axonal damage after traumatic brain injury in mice

  • Pedragosa, Jordi
  • Mercurio, Domenico
  • Oggioni, Marco R.
  • Márquez-Kisinousky, Leonardo
  • Simoni, Maria-Grazia de
  • Planas, Anna M.
Leukocyte infiltration and blood-brain barrier breakdown contribute to secondary brain damage after traumatic brain injury (TBI). TBI induces neuroimmune responses triggering pathogenic complement activation through different pathways, including the lectin pathway. We investigated mechanisms underlying mannose-binding lectin (MBL)-mediated brain damage focusing on neutrophil infiltration and blood-brain barrier breakdown in a TBI mouse model. Wild type mice and MBL null mice were subjected to controlled cortical impact. We studied neutrophil infiltration and regional localization by confocal microscopy 1, 4 and 15 days post-trauma, and investigated neutrophil extracellular trap (NET) formation. By immunofluorescence and/or Western blotting in various brain regions we studied the presence of fibrin(ogen), pentraxin-3, albumin and immunoglobulin G. Finally, we studied neurofilament proteins, synaptophysin, and αII-spectrin, and assessed white matter content in the injured tissue. TBI triggered an acute wave of neutrophil infiltration at day 1 followed by a more discrete persistence of neutrophils in the injured tissue at least until day 15. We detected the presence of NETs and pentraxin-3 in the injured tissue, as well as accumulation of fibrin(ogen), increased blood-brain barrier permeability, and neurofilament, synaptophysin and white matter loss, and calpain-mediated αII spectrin breakdown. MBL mice showed reduced number of Ly6G neutrophils 4 days after TBI, lower accumulation of pentraxin-3 and fibrin(ogen) in the injured tissue, reduced global plasma protein extravasation, and better preservation of axonal and white matter integrity. These results show that MBL participates in secondary neutrophil accumulation and blood-brain barrier breakdown, and promotes axonal and white matter damage after TBI in mice., This work was supported by ERA-NET-NEURON, JTC 2016: LEAP, NEURON9-FP-044 from the following national funding institutions: Ministerio de Economia, Industria y Competitividad (PCIN-2017-035) Spain, and the Italian Ministry of Health (Ministero della Salute), Italy.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Protein Expression of the Microglial Marker Tmem119 Decreases in Association With Morphological Changes and Location in a Mouse Model of Traumatic Brain Injury

  • Mercurio, Domenico
  • Fumagalli, Stefano
  • Schafer, Martin K. H.
  • Pedragosa, Jordi
  • Dejeumen, Lionel
  • Ngassam, Claude
  • Wilhelmi, Verena
  • Winterberg, Sarah
  • Planas, Anna M.
  • Weihe, Eberhard
  • Simoni, Maria-Grazia de
The activation of microglia and the infiltration of macrophages are hallmarks of neuroinflammation after acute brain injuries, including traumatic brain injury (TBI). The two myeloid populations share many features in the post-injury inflammatory response, thus, being antigenically indistinguishable. Recently Tmem119, a type I transmembrane protein specifically expressed by microglia under physiological conditions, was proposed as a tool to differentiate resident microglia from blood-borne macrophages, not expressing it. However, the validity of Tmem119 as a specific marker of resident microglia in the context of acute brain injury, where microglia are activated and macrophages are recruited, needs validation. Our purpose was to investigate Tmem119 expression and distribution in relation to the morphology of brain myeloid cells present in the injured area after TBI. Mice underwent sham surgery or TBI by controlled cortical impact (CCI). Brains from sham-operated, or TBI mice, were analyzed by in situ hybridization to identify the cells expressing Tmem119, and by Western blot and quantitative immunofluorescence to measure Tmem119 protein levels in the entire brain regions and single cells. The morphology of Iba1+ myeloid cells was analyzed at different times (4 and 7 days after TBI) and several distances from the contused edge in order to associate Tmem119 expression with morphological evolution of active microglia. In situ hybridization indicated an increased Tmem119 RNA along with increased microglial complement C1q activation in the contused area and surrounding regions. On the contrary, the biochemical evaluation showed a drop in Tmem119 protein levels in the same areas. The Tmem119 immunoreactivity decreased in Iba1+ myeloid cells found in the contused cortex at both time points, with the cells showing the hypertrophic ameboid morphology having no Tmem119 expression. The Tmem119 was present on ramifications of resident microglia and its presence was decreased as a consequence of microglial activation in cortical areas close to contusion. Based on the data, we conclude that the decrease of Tmem119 in reactive microglia may depend on the process of microglial activation, which involves the retracting of their branchings to acquire an ameboid shape. The Tmem119 immunoreactivity decreases in reactive microglia to similar levels than the blood-borne macrophages, thus, failing to discriminate the two myeloid populations after TBI., This work was supported by the ERA-NET NEURON, JTC 2016: LEAP, NEURON9-FP-044 from the following national funding institutions: Italian Ministry of Health (Ministero della Salute), Italy; Ministerio de Economía, Industria y Competitividad (PCIN-2017-035) Spain; 01EW1703, Bundesministerium für Bildung und Forschung (BMBF), Germany., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Spatiotemporal oxygen dynamics in young leaves reveal cyclic hypoxia in plants

  • Triozzi, Paolo M.
  • Brunello, Luca
  • Novi, Giacomo
  • Ferri, Gianmarco
  • Cardarelli, Francesco
  • Loreti, Elena
  • Perales, Mariano
  • Perata, Pierdomenico
18 Pág., Oxygen is essential for plant growth and development. Hypoxia occurs in plants due to limited oxygen availability following adverse environmental conditions as well in hypoxic niches in otherwise normoxic environments. However, the existence and functional integration of spatiotemporal oxygen dynamics with plant development remains unknown. In animal systems dynamic fluctuations in oxygen availability are known as cyclic hypoxia. In this study, we demonstrate that cyclic fluctuations in internal oxygen levels occur in young emerging leaves of Arabidopsis plants. Cyclic hypoxia in plants is based on a mechanism requiring the ETHYLENE RESPONSE FACTORS type VII (ERFVII) that are central components of the oxygen-sensing machinery in plants. The ERFVII-dependent mechanism allows precise adjustment of leaf growth in response to carbon status and oxygen availability within plant cells. This study thus establishes a functional connection between internal spatiotemporal oxygen dynamics and developmental processes of plants., This work was supported by Sant’Anna School of Advanced Studies, Pisa (Italy). P.M.T. was awarded the Margarita Salas Post-Doc fellowship by the Universidad Politécnica de Madrid (Spain) and funded by European Union-NextGenerationEU (UP2021-035). We acknowledge the Italian Ministry of University and Research for funding the PINS project as part of the joint program "Le Scuole Superiori ad Ordinamento Speciale: istituzioni a servizio del Paese.", Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Variation in insect herbivory across an urbanization gradient: The role of abiotic factors and leaf secondary metabolites

  • Moreira Tomé, Xoaquín
  • Van den Bossche, Astrid
  • Moeys, Karlien
  • Van Meerbeek, Koenraad
  • Thomaes, Arno
  • Vázquez-González, Carla
  • Abdala-Roberts, Luis
  • Brunet, Jörg
  • Cousins, Sara A. O.
  • Defossez, Emmanuel
  • De Pauw, Karen
  • Diekmann, Martin
  • Glauser, Gaétan
  • Graae, Bente J
  • Hagenblad, Jenny
  • Heavyside, Paige
  • Hedwall, Per-Ola
  • Heinken, Thilo
  • Huang, Siyu
  • Lago-Núñez, Beatriz
  • Lenoir, Jonathan
  • Lindgren, Jessica
  • Lindmo, Sigrid
  • Mazalla, Leonie
  • Naaf, Tobias
  • Orczewska, Anna
  • Paulssen, Jolina
  • Plue, Jan
  • Rasmann, Sergio
  • Spicher, Fabien
  • Vanneste, Thomas
  • Verschuren, Louis
  • Visakorpi, Kristiina
  • Wulf, Monika
  • De Frenne, Pieter
9 páginas, 6 figuras, Urbanization impacts plant-herbivore interactions, which are crucial for ecosystem functions such as carbon sequestration and nutrient cycling. While some studies have reported reductions in insect herbivory in urban areas (relative to rural or natural forests), this trend is not consistent and the underlying causes for such variation remain unclear. We conducted a continental-scale study on insect herbivory along urbanization gradients for three European tree species: Quercus robur, Tilia cordata, and Fraxinus excelsior, and further investigated their biotic and abiotic correlates to get at mechanisms. To this end, we quantified insect leaf herbivory and foliar secondary metabolites (phenolics, terpenoids, alkaloids) for 176 trees across eight European cities. Additionally, we collected data on microclimate (air temperature) and soil characteristics (pH, carbon, nutrients) to test for abiotic correlates of urbanization effects directly or indirectly (through changes in plant secondary chemistry) linked to herbivory. Our results showed that urbanization was negatively associated with herbivory for Q. robur and F. excelsior, but not for T. cordata. In addition, urbanization was positively associated with secondary metabolite concentrations, but only for Q. robur. Urbanization was positively associated with air temperature for Q. robur and F. excelsior, and negatively with soil nutrients (magnesium) in the case of F. excelsior, but these abiotic variables were not associated with herbivory. Contrary to expectations, we found no evidence for indirect effects of abiotic factors via plant defences on herbivory for either Q. robur or F. excelsior. Additional biotic or abiotic drivers must therefore be accounted for to explain observed urbanization gradients in herbivory and their interspecific variation., This research was supported by grants from the Research Foundation – Flanders (FWO) (G000322N CoolTree project to fund the scientific research network FLEUR; https://fleur.ugent.be/), the Spanish Ministry of Science and Innovation (PID2022-141761OB-I00 and EUR2023-143463 projects) and the Galician Innovation Agency (IN607A 2021/03 and the Oportunius Program projects). KDP was supported by the Research Foundation – Flanders (FWO, ASP035-19). JL acknowledges the Région Hauts-de-France, the Ministère de l’Enseignement Supérieur et de la Recherche and the European Fund for Regional Economic Development for their financial support (CPER ECRIN). TV was supported by the Special Research Fund (BOF) of Ghent University (01P09722 project). CVG was supported by a postdoctoral fellowship from the Xunta de Galicia-GAIN/Fulbright (IN606B 2021/004)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

CO2 and steam electrolysis using a microtubular solid oxide cell

  • Monzon, H.
  • Laguna-Bercero, M.A.
Nickel-yttria stabilized zirconia (Ni-YSZ) supported tubes were fabricated by plastic extrusion molding (PEM). YSZ was used as the electrolyte and LSM-YSZ (lanthanum-strontium doped manganite) as the oxygen electrode. Both layers were deposited by dip coating and were then sintered at 1500 degrees C and 1150 degrees C, respectively. Coelectrolysis experiments were performed in these cells at 850 degrees C, using different fuel gas conditions varying the amount of steam, carbon dioxide, nitrogen and hydrogen. Area specific resistance (ASR) values ranged from 0.47 Omega cm(2), when rich steam and CO2 flows are used, to 1.74 Omega cm(2), when a diluted composition is used. Gas chromatography was used to examine the amount of H-2 and CO in the output gas. The obtained results are consistent with the equilibrium of the water gas shift reaction. For all the different analysed conditions, faradaic efficiency was found to be close to 100%. This experiment confirmed that there is no electronic conduction taking place through the YSZ electrolyte. The threshold for electronic conduction in the diluted feeding conditions (Poor H2O and CO2) for these particular YSZ-based cell was found at voltages of about 1.65 V.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Broadband and Compact Circularly Polarized MIMO Antenna With Concentric Rings and Oval Slots for 5G Application

  • Kulkarni, Jayshri
  • Sim, Chow-Yen-Desmond
  • Gangwar, Ravi Kumar
  • Anguera, Jaume
A broadband and compact size circularly polarized (CP) two-port multiple input multiple output (MIMO) antenna with a footprint of 25 mm ×20 mm is investigated. The designed oval-shaped MIMO antenna employs concentric rings with oval slots (CROS), along with a circular radiator and two open-ended parallel protruded stubs. The CP radiation is achieved by embedding three oval slots, in which two of them are deployed at the left and right side of the concentric rings, whereas the third one is deployed at the top section of the concentric rings. The measured 10-dB impedance bandwidth of the proposed MIMO antenna was 46.30% (3.12–5.00 GHz), and its corresponding 3-dB axial ratio bandwidth (ARBW) was 41.34% (3.30–5.02 GHz). Furthermore, very wide beamwidths of 137∘±0.2 and 154∘±0.2 were measured in the right-hand circular polarization (RHCP) and left-hand circular polarization (LHCP) radiation patterns, respectively. The minimum achieved isolation between the antenna elements is 18.50 dB without using any additional decoupling structure, and the calculated envelope correlation coefficient (ECC) < 0.03, info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Characterisation and prognosis of undiagnosed chronic obstructive pulmonary disease patients at their first hospitalisation

  • Balcells Vilarnau, Eva
  • Gimeno-Santos, Elena
  • De Batlle, Jordi
  • Ramon, Maria Antonia
  • Rodríguez, Esther
  • Benet Mora, Marta
  • Farrero, Eva
  • Ferrer, Antoni
  • Guerra, Stefano
  • Ferrer, Jaume
  • Sauleda, Jaume
  • Barberà, Joan A.
  • Agustí, Àlvar
  • Rodríguez-Roisin, Robert
  • Gea, Joaquim
  • Antó, Josep M.
  • Garcia Aymerich, Judith
Background Under-diagnosis of COPD is an important unmet medical need. We investigated the characteristics and prognosis of hospitalised patients with undiagnosed COPD. Methods The PAC-COPD cohort included 342 COPD patients hospitalised for the first time for an exacerbation of COPD (2004–2006). Patients were extensively characterised using sociodemographic, clinical and functional variables, and the cohort was followed-up through 2008. We defined “undiagnosed COPD” by the absence of any self-reported respiratory disease and regular use of any pharmacological respiratory treatment. Results Undiagnosed COPD was present in 34% of patients. They were younger (mean age 66 vs. 68 years, p = 0.03), reported fewer symptoms (mMRC dyspnoea score, 2.1 vs. 2.6, p < 0.01), and had a better health status (SGRQ total score, 29 vs. 40, p < 0.01), milder airflow limitation (FEV1% ref., 59% vs. 49%, p < 0.01), and fewer comorbidities (two or more, 40% vs. 56%, p < 0.01) when compared with patients with an established COPD diagnosis. Three months after hospital discharge, 16% of the undiagnosed COPD patients had stopped smoking (vs. 5%, p = 0.019). During follow-up, annual hospitalisation rates were lower in undiagnosed COPD patients (0.14 vs. 0.25, p < 0.01); however, this difference disappeared after adjustment for severity. Mortality was similar in both groups. Conclusions Undiagnosed COPD patients have less severe disease and lower risk of re-hospitalisation when compared with hospitalised patients with known COPD., info:eu-repo/semantics/publishedVersion
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

Geometrodynamic approach to conjugate points and the Maslov index.

Archivo Digital UPM
Publication Artículo científico (JournalArticle)

Chaos indicator and integrability conditions from geometrodynamics

  • Vergel Otero, Alberto
  • Losada González, Juan Carlos|||0000-0002-4373-603X
  • Benito Zafrilla, Rosa Maria|||0000-0003-3949-8232
  • Borondo Rodríguez, Florentino|||0000-0003-3094-8911
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

Implications of forest management on the conservation of protected areas: a new proposal in Central Spain

  • Ezquerro García, Marta|||0000-0001-6508-9382
  • Díaz Balteiro, Luis|||0000-0002-4435-2740
  • Pardos Mínguez, Marta
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

Surface and Interior Dynamics of Arctic Seas Using Surface Quasi-Geostrophic Approach

  • Umbert Ceresuela, Marta|||0000-0002-0748-7566
  • Andres Marruedo, Eva de|||0000-0001-7053-3943
  • Gonçalves Araujo, Rafael|||0000-0001-8344-8326
  • Gutiérrez García, Marina|||0009-0000-5809-9048
  • Raj, Roshin P.|||0000-0001-5863-5269
  • Bertino, Laurent|||0000-0002-1220-7207
  • Gabarró Prats, Carolina|||0000-0003-0004-1964
  • Isern Fontanet, Jordi|||0000-0002-9324-608X
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

Integration of Chemical Looping Combustion in the Graz Power Cycle

  • Arnaiz Del Pozo, Carlos Rafael|||0000-0003-0951-932X
  • Sánchez Orgaz, Susana|||0000-0002-5215-930X
  • Navarro Calvo, Alberto|||0009-0002-0875-1397
  • Jiménez Alvaro, Ángel|||0000-0003-2399-2463
  • Cloete, Schalk|||0000-0001-9641-2939
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

Large beam-to-column steel joint for the Dune Neutrino Experiment: Experimental and numerical insights

  • Simões da Silva, Luís|||0000-0001-5225-6567
  • Craveiro, Helder|||0000-0001-8590-5885
  • Simões, Rui|||0000-0002-1793-3291
  • Martins, Claúdio|||0000-0003-1424-6928
  • Conde Conde, Jorge|||0000-0002-5633-1170
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

Estimation of the cyclopean eye from binocular smooth pursuity tests

  • Luque Buzo, Elisa|||0000-0002-7983-9268
  • Bejani, Mehdi|||0000-0002-7668-3413
  • Arias Londoño, Julián David|||0000-0002-1928-773X
  • Gómez García, Jorge Andrés|||0000-0002-6060-387X
  • Grandas Pérez, Francisco|||0000-0001-6547-7617
  • Godino Llorente, Juan Ignacio|||0000-0001-7348-3291
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

Characterization of biochar from beach-cast seaweed and its use for amelioration of acid soils

  • Cárdenas Aguiar, Eliana Marcela|||0000-0002-9686-0333
  • Gascó Guerrero, Gabriel|||0000-0001-6751-2287
  • Lado Liñares, Marcos|||0000-0001-6996-0964
  • Méndez Lázaro, Ana María|||0000-0001-9642-0875
  • Paz Ferreiro, Jorge|||0000-0001-8169-4099
  • Paz González, Antonio|||0000-0001-6318-8117
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

The effects of feedstock, pyrolysis temperature, and residence time on the properties and uses of biochar from broom and gorse wastes

  • Cárdenas Aguiar, Eliana Marcela|||0000-0002-9686-0333
  • Méndez Lázaro, Ana María|||0000-0001-9642-0875
  • Gascó Guerrero, Gabriel|||0000-0001-6751-2287
  • Lado Liñares, Marcos|||0000-0001-6996-0964
  • Paz González, Antonio|||0000-0001-6318-8117
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

Automatic semantic segmentation of the osseous structures of the paranasal sinuses

  • Sun, Yichun|||0009-0008-0675-087X
  • Guerrero López, Alejandro|||0000-0001-8869-3363
  • Arias Londoño, Julián David|||0000-0002-1928-773X
  • Godino Llorente, Juan Ignacio|||0000-0001-7348-3291
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

Optimal Rotation and Ecosystem Services: A Generalization in Forest Plantations

  • Delgado Rodríguez, Martín
  • Díaz Balteiro, Luis|||0000-0002-4435-2740
  • Ribeiro Nobre, Silvana|||0000-0003-0750-8969
  • Estraviz Rodríguez, Luis Carlos|||0000-0002-1430-7981
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

Ring Test: An Experimental Study on Anisotropic Rock

  • Santos de Alencar, Ana Teresa|||0000-0003-1403-997X
  • Muñiz Menéndez, Mauro|||0000-0001-5202-0044
  • Galindo Aires, Rubén Ángel|||0000-0001-9407-9183
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

Resin: not only a secondary forest product

  • Delgado Rodríguez, Martín
  • Rodríguez Soalleiro, Roque|||0000-0001-6914-4748
  • Ribeiro Nobre, Silvana|||0000-0003-0750-8969
  • Estraviz Rodríguez, Luis Carlos|||0000-0002-1430-7981
  • Díaz Balteiro, Luis|||0000-0002-4435-2740
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

NDVI from Sentinel-2 images: a soil erosion indicator in Mediterranean rainfed croplands

  • Rodríguez Rastrero, Manuel|||0000-0001-9460-737X
  • Cicuéndez López-Ocaña, Víctor Manuel|||0000-0002-9934-0472
  • Recuero Pavón, Laura|||0000-0001-5474-4900
  • Litago Lavilla, Jesús Javier|||0000-0003-2088-7991
  • Palacios Orueta, Alicia|||0000-0002-1248-8336
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

Tensile Strength Evaluation by Brazilian and Direct Tensile Tests: Experimental Insights and Influencing Factors

  • Santos de Alencar, Ana Teresa|||0000-0003-1403-997X
  • Muñiz Menéndez, Mauro|||0000-0001-5202-0044
  • Galindo Aires, Rubén Ángel|||0000-0001-9407-9183
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Alteration of the HIF-1alfa/VEGF Signalling Pathway and Disruption of the Cell Cycle by Second Generation Carbosilan Dendrimers

  • Barrios Gumiel, Óscar|||0000-0002-1862-9793
  • Sánchez Gómez, Belén|||0000-0003-0971-1522
  • Rodríguez Prieto, Tamara|||0000-0002-3764-7217
  • Cano Sierra, Jesús|||0000-0002-6643-7534
  • Bort Bueno, Alicia Carmen|||0000-0003-1490-5823
  • Gómez Ramírez, Rafael|||0000-0001-6448-2414
  • Díaz-Laviada Marturet, Inés Cecilia|||0000-0001-9704-4373
Current therapies against prostate cancer (PCa) disease, such as surgery, radiotherapy, or in last term chemical castration by androgen deprivation, have led to significant reduction of the incidence of PCa throughout the world. Worse prognosis found in those patients which exhibit castration resistance, relapsing into the disease with e v e n greater aggressiveness. Hypoxia cancer cell adaption has been observed to be closely connected to fatal prognostic tumor features. Therefore, hypoxia adaptive mechanisms of cancer cells have attracted large interest as a relev a n t biological target for treatment-resistant patients. Dendrimer s have been established as a promising nanotechnological tool owing to their beneficial physicochemical features such as multivalency and monodispersity. Herein, we have completed a thorough study to better understand the effect wit h i n the cel l of the already published ruthenium(II)-N-heterocyclic carbene metallodendrimer (G2Ru) that was able to drastically reduce HIF-1 alpha stabilization and exhibited antiproliferative capabi l i t y against androgen-sensitive (LNCaP) and androgen-resistant prostate cancer cells (LNFLU) in vitro. G2Ru, as well as its cationic imidazol i u m precursor (G2P), displayed scaven g i n g properties against intracellula r and externa l l y stimulated ROS levels, which would presumably hinder the stabilization of HIF-1 alpha by prolyl hydroxylase (PHD) inhibition. Furthermore, these dendrimers have shown considerably beneficial properties against tumor progression capabi l i t y in terms of apoptosis, cell cycle, CSCs expression, and epithelial phenotype promotion. Taken all together, in this study we could demonstrate the extraordinary anticancer properties of NHC-based carbosilane dendrimers against androgen-resistant prostate cancer cells in vitro, Instituto de Salud Carlos III, Comunidad de Madrid, Fundación Tatiana Pérez de Guzmán el Bueno, Universidad de Alcalá, Ministerio de Economía, Industria y Competitividad
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Bio-based poly(ethylene brassylate) as a sustainable high-performance thermoplastic: Insights into its crystalline morphology, mechanical properties and rheology

  • Rentero Llorente, Christian|||0000-0001-6087-762X
  • Sotillo, Alberto
  • Souza Egipsy, Virginia
  • Vega, Juan F
  • Sessini , Valentina|||0000-0003-1205-4586
  • González Mosquera, Marta Elena|||0000-0003-2248-3050
14 p., High-molecular-weight poly(ethylene brassylate) (PEB), a biobased and biodegradable polyester, was synthesized via ring-opening polymerization of ethylene brassylate using a highly active sodium phenoxide catalyst. Reaction conditions were optimized to achieve full monomer conversion and molecular weights up to 600 kDa. A comprehensive characterization has been performed that evidence the strong influence of the molecular weight in the thermal, mechanical, and rheological properties. Differential scanning calorimetry and WAXS confirmed a semicrystalline structure with multiple melting peaks and decreasing crystallinity as molecular weight increased. Mechanical testing revealed a transition from polyethylene-like behavior to a highly ductile, high-strain response in high-Mw samples, characterized by exceptional extensibility profile. Rheological analysis provided evidence of long-chain branching in polymers prepared without coinitiator, significantly affecting the viscoelastic response and extensional flow. These findings highlight PEB as a promising sustainable alternative to conventional polyolefins, combining favorable thermal stability, tunable mechanical properties, and processability for advanced applications such as packaging, 3D printing, and shape-memory materials., Agencia Estatal de Investigación, Fondo Europeo de Desarrollo Regional, Unión Europea, CSIC, Consejo Superior de Investigaciones Científicas, Universidad de Alcalá, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Improving the efficiency of solar photovoltaics by means of geothermal cooling: a year-long test campaign

  • López Pascual, Diego|||0000-0002-2485-2297
  • Valiente Blanco, Ignacio|||0000-0001-5068-7910
  • Fernández Muñoz, Miguel|||0000-0001-8872-7834
  • Díez Jiménez, Efrén|||0000-0002-3689-841X
Heating up of photovoltaic modules during operation results in a significant power output reduction. This effect is especially relevant in regions with the highest photovoltaic potential, where irradiance and ambient temperature are particularly high. In this paper, a novel low enthalpy geothermal cooling system that improves the efficiency of a commercial solar module is described and experimentally validated. Two heat exchangers, one attached to the backside of the module, and another introduced inside a 15 m deep borehole, are connected in a closed circuit. A water-based coolant is pumped through the system, evacuating the excess heat from the module, and dissipating it underground in a clean and efficient manner, without additional water consumption after filling the system. The performance of the cooling system was experimentally tested by implementing it, for the first time, in a single-axis solar tracking isolated photovoltaic facility. Extensive tests were carried out in Spain, between September 2021 and August 2022 under a wide variety of environmental conditions. The efficiency improvement system has demonstrated its technical feasibility over a one-year period, showing a peak net efficiency improvement up to 13.4 %. Moreover, a positive net efficiency improvement has been demonstrated all year long, even during the winter months., Ministerio de Ciencia e Innovación, Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Physical Properties and Consumer Evaluation of Cocoa Bean Shell-Functionalized Biscuits Adapted for Diabetic Consumers by the Replacement of Sucrose with Tagatose

  • Rojo Poveda, Olga
  • Barbosa Pereira, Letricia
  • Orden Martín, David|||0000-0001-5403-8467
  • Stévigny, Caroline
  • Zeppa, Giuseppe
  • Bertolino, Marta
The cocoa bean shell (CBS), a by-product of the cocoa industry, has been reported to be rich in fiber and polyphenols, which could contribute to reducing the metabolism of sugars and glucose adsorption. The production of CBS-based biscuits in which sucrose is replaced with tagatose (a low-glycemic sugar with prebiotic properties), benefiting diabetic consumers, is proposed. Six prototype biscuits were produced using sucrose, tagatose, and CBS powder at 0%, 10%, and 20% as a wheat flour replacement. Biscuits were studied in terms of fiber content, and those with 10% and 20% CBS showed to contain 5.66% and 8.70-8.71% of total dietary fiber, respectively. Moreover, the physicochemical and structural properties of the biscuits were studied to evaluate their differences due to the use of sucrose and tagatose combined with CBS. Significant effects mainly caused by the reducing nature and lower solubility of tagatose with respect to sugar, and the water retention capacities of CBS were observed. Finally, the biscuits were evaluated by performing a consumer acceptance evaluation, and their perceptible sensorial differences were studied by performing a Napping(R)sensory characterization. CBS-based biscuits represent an interesting possibility for cocoa by-product revalorization, although an optimized recipe is recommended, especially when employing tagatose., Ministerio de Ciencia, Innovación y Universidades, Universidad de Alcalá
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Effect of Temperature on Biohydrogen and Biomethane Productions by Anaerobic Digestion of Sugar Beet by-Products

  • Aboudi, Kaoutar
  • Gómez Quiroga, Xiomara
  • Álvarez Gallego, Carlos José
  • Quiroga Alonso, José María
  • Romero García, Luis Isidoro
This work analyzes the effect of temperature on the anaerobic digestion of sugar beet by-products for both biohydrogen and biomethane production. The findings demonstrate that the anaerobic process was significantly affected by the increase in temperature from mesophilic to thermophilic or hyper-thermophilic conditions. Therefore, it was found that the mesophilic temperature was more suitable for the anaerobic digestion of sugar beet by-products, using either the raw feedstock or the pretreated feedstock at higher temperatures. The specific production of biohydrogen from thermophilic acidogenic digester was 1.7 fold higher than that obtained from the hyper-thermophilic one. Moreover, when raw feedstock was used in single stage digesters, a methane production rate of 0.55 LCH4/Lr*d was obtained from the mesophilic digester, which was 45% higher than that of the thermophilic one. It has been observed that the increase in temperature led to a high accumulation of volatile and long chain fatty acids, inhibiting and slowing down the anaerobic process.