Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 38
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Paving the way to modern growth, The Spanish Bourbon roads

  • García López, Miquel-Àngel|||0000-0002-0515-2922
  • Herranz-Loncán, Alfonso
  • Tassinari, Filippo
  • Viladecans Marsal, Elisabet|||0000-0003-3722-2371
This paper analyses the impact that Spanish road construction had on local population growth between 1787 and 1857. We find that the increase in market potential associated to road accessibility had a significant effect on local population growth. The impact was substantially higher on the municipalities that had a more diversified occupational structure. By contrast, the effect of the new network on population growth was negative in municipalities close but without direct access to the roads. We interpret these findings as evidence of a process of rural-to-rural migration due to the new roads.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A latent space-based multivariate capability index: A new paradigm for raw material supplier selection in industry 4.0

  • Borràs-Ferrís, Joan
  • Duchesne, Carl
  • Ferrer, Alberto|||0000-0001-7244-5947
[EN] We present a novel Latent Space-based Multivariate Capability Index (LSb-MCpk) aligned with the Quality by Design initiative and used as a criterion for ranking and selecting suppliers for a particular raw material used in a manufacturing process. The novelty of this new index is that, contrary to other multivariate capability indexes that are defined either in the raw material space or in the Critical Quality Attributes (CQAs) space of the product manufactured, this new LSb-MCpk is defined in the latent space connecting both spaces. This endows the new index with a clear advantage over classical ones as it quantifies the capacity of each raw material supplier of providing assurance of quality with a certain confidence level for the CQAs of the manufactured product before manufacturing a single unit of the product. All we need is a rich database with historical information of several raw material properties along with the CQAs. Besides, we present a novel methodology to carry out the diagnosis for assignable causes when a supplier does not score a good capability index. The proposed LSb-MCpk is based on Partial Least Squares (PLS) regression, and it is illustrated using data from both an industrial and a simulation study., This work was partially funded by the Valencian Regional Government: Consellería de Educacion, Universidades y Empleo (CIAICO/ 2023/189), the Spanish Ministry of Economy, Industry and Competitiveness (DPI2017-82896-C2-1-R), and the European Social Fund (ACIF/ 2018/165).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Protein adsorption/desorption dynamics on Ca-enriched titanium surfaces: biological implications

  • Romero-Gavilán, Francisco
  • Cerqueira, Andreia
  • Anitua, Eduardo
  • Tejero, Ricardo
  • García-Arnáez, Iñaki
  • Ozturan, Seda
  • Izquierdo, Raul
  • Azkargorta, Mikel
  • Elortza, Félix
  • Gurruchaga, Mariló
  • Goñi, Isabel
  • Suay, Julio
  • Martínez-Ramos, Cristina|||0000-0002-6540-4714
[EN] Calcium ions are used in the development of biomaterials for the promotion of coagulation, bone regeneration, and implant osseointegration. Upon implantation, the time-dependent release of calcium ions from titanium implant surfaces modifies the physicochemical characteristics at the implant-tissue interface and thus, the biological responses. The aim of this study is to examine how the dynamics of protein adsorption on these surfaces change over time. Titanium discs with and without Ca were incubated with human serum for 2 min, 180 min, and 960 min. The layer of proteins attached to the surface was characterised using nLC-MS/MS. The adsorption kinetics was different between materials, revealing an increased adsorption of proteins associated with coagulation and immune responses prior to Ca release. Implant-blood contact experiments confirmed the strong coagulatory effect for Ca surfaces. We employed primary human alveolar osteoblasts and THP-1 monocytes to study the osteogenic and inflammatory responses. In agreement with the proteomic results, Ca-enriched surfaces showed a significant initial inflammation that disappeared once the calcium was released. The distinct protein adsorption/desorption dynamics found in this work demonstrated to be useful to explain the differential biological responses between the titanium and Ca-ion modified implant surfaces., This work was supported by MINECO [MAT2017-86043-R; RTC-2017-6147-1], Generalitat Valenciana [GRISOLIAP/2018/091; APOSTD/2020/036, PROMETEO/2020/069], Universitat Jaume I under [ UJI-B2017-37], the University of the Basque Country under [GIU18/189] and Basque Government under [PRE_2017_2_0044]. The authors would like to thank Raquel Oliver, Jose Ortega and Iraide Escobes for their valuable technical assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Characterization of Functionalized Side-Chain Liquid CrystalMethacrylates Containing Nonmesogenic Units by DielectricSpectroscopy

  • Martinez-Felipe, Alfonso
  • Santonja Blasco, Laura
  • Badia, J.D.
  • Imrie, C.
  • Ribes-Greus, A.
[EN] The dielectric response of a series of side-chain liquid crystal copolymers, SCLCPs, the poly[6-(4'-methoxyazobenzene-4'-oxy)hexyl methacrylate]-co-poly[methyl methacrylate]s, MeOAzB/MMA copolymers, is presented in the frequency range f = 10(-2) to 107 Hz and over the temperature interval T = 150 to 120 degrees C. The relaxation spectra of these polymers have been studied in terms of the complex dielectric permittivity (epsilon' and epsilon '') and the dielectric loss tangent, tan(delta). The electric modulus, M*, has been also calculated. It is possible to distinguish two relaxations zones, one at low temperatures (including gamma and beta relaxations) and another at higher temperatures (including the alpha and beta 1 relaxations), all of them reported for liquid crystalline poly(methacrylate)s. The individual relaxations have been analyzed using Havriliak-Negami (HN) functions, and the effect of conductivity at high temperatures is subtracted. The thermal activation of the relaxations at low temperatures is studied using the Arrhenius equations as a function of copolymer composition, while the alpha and beta 1 relaxations are analyzed using Vogel-Tammann-Fulcher equations. The activation entropy has been also evaluated for all the relaxations through the Eyring equation. The temperature ranges, activation energies, and entropies of the relaxations at low temperatures (gamma and beta) are similar in the homopolymer and copolymers. However, the introduction of MMA units promotes variations in all the parameters related to the relaxations associated with the motions of the ester groups adjoining the polymer backbone. Specifically, a decrease is observed in the activation entropy values of the beta 1 relaxation, which suggests that the activation of the local motions of the side groups involves smaller cooperative regions in the copolymers with respect to the homopolymer. This fact may account for the extinction of the smectic behavior, together with the dilution of the anisotropic interactions between the mesogenic units on increasing MMA content. The study of this beta 1 relaxation can be then applied to anticipate the formation and stability of smectic phases in functionalized SCLCPs, by controlling the local mobility resulting in different mesogenic behavior., This paper is meant to be a tribute and recognition to the research activity of Professor Giulio Sarti. The authors would like to thank Dr. Victor Saenz de Juano for his advice during the discussion of the results and also the Spanish Ministry of Science and Innovation, through the Research Projects ENE2007-67584-C03, UPOVCE-3E-013, IT2009-0074, and ENE2011-28735-C02-01 and two FPI and FPU predoctoral grants, and the financial support of the Generalitat Valenciana, through the Grisolia and Forteza programs and the ACOMP/2011/189 program. UPV is also thanked for additional support through the PAID 05-09-4331 and PAID-06-11 programs.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

New Results on the Mixed General Routing Problem

  • Corberán, Angel
  • Mejía, Gustavo
  • Sanchís Llopis, José María|||0000-0002-0039-8122
[EN] In this paper, we deal with the polyhedral description and the resolution of the Mixed General Routing Problem. This problem, in which the service activity occurs both at some of the nodes and at some of the arcs and edges of a mixed graph, contains a large number of important arc and node routing problems as special cases. Here, a large family of facet-defining inequalities, the Honeycomb inequalities, is described. Furthermore, a cutting-plane algorithm for this problem that incorporates new separation procedures for the K-C, Regular Path-Bridge, and Honeycomb inequalities is presented. Branch and bound is invoked when the final solution of the cutting-plane procedure is fractional. Extensive computational experiments over different sets of instances are included., The contribution by A. Corberán and J. M. Sanchis has been partially supported by the Ministerio de Ciencia y Tecnología of Spain (Ref: TIC2003-05982-C05-01) and by the AVCiT de la Generalitat Valenciana (Ref: GRUPOS03/189).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Monitoring holograms for therapeutic ultrasound using passive cavitation beamforming

  • Lamothe, Nathalie
  • Andrés-Bautista, Diana
  • Pineda-Pardo, J.A.
  • CARRIÓN GARCÍA, ALICIA|||0000-0002-0630-6065
  • Camarena Femenia, Francisco|||0000-0002-6713-1414
  • Jimenez, Noe|||0000-0002-6539-670X
[EN] Acoustic holograms can generate cavitation patterns of complex spatial distribution by shaping and steering the focal spot of therapeutic ultrasound systems. However, when monitoring these systems by passive cavitation detection, off-axis therapeutical targets and the receiver directivity may not be aligned. In this paper, we present passive cavitation beamforming to monitor a therapeutical ultrasound system using holograms targeted to arbitrary locations, in which both therapeutic and passive cavitation monitoring systems use 3D-printed acoustic lenses. The therapeutic system uses an acoustic hologram to focus the ultrasound beam on the target, which is off-axis. Then, a second lens is designed to beamform the cavitation signals which emerge from the therapeutic target, steering the directivity of the passive cavitation detector in the direction of the therapeutic focus and, in addition, compensating for skull aberrations. The system is experimentally tested with an ex-vivo macaque skull and a blood vessel phantom with microbubbles. In addition, results are compared with a standard confocal configuration and an off-axis configuration in the absence of the monitor lens. A parametric study is performed by varying the amplitude of the emitted signal and the impact on the behaviour of the microbubbles is analysed based on the cavitation index values. Results show that monitoring holograms align the passive cavitation detector response with the focal spot of the targeted therapeutic transducer. These holograms encode a fixed beamformer for cavitation signals in reception, increasing the sensitivity of cavitation emission at the target. In this way, cavitation doses can be used to locally monitor the cavitation activity of microbubbles, thus opening a new path to low-cost monitoring of therapeutic ultrasound systems., This research has been supported by the Ministerio Español de Ciencia e Innovación and the Ministerio de Universidades grants FJC2019-040453-I, RYC2021-034920-I, FPU19/00601 and Agencia Estatal de Investigación grants PID2022-142719OB-C21 and CNS2023-145707 funded by MCIN/AEI/10.13039/501100011033; Agència Valenciana de la Innovació grants INNVA2/2022/11 and INNEST/2022/345; Generalitat Valenciana grants EDGJID/2021/189, CIGE/2021/175, CIAICO/2023/052, CIPROM/2021/003, FDEGENT/2019/004 and IDIFEDER/2021/004.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Modeling Physical Activity Profiles in COPD Patients: A Basis Expansion Approach to Variable Domain Functional Regression Models

  • Hernández-Amaro, Pavel
  • Durban, María
  • Esteban Gonzalez, Cristobal
  • Arostegui, Inmaculada
  • Aguilera-Morillo, M. Carmen|||0000-0003-1027-9773
[EN] Physical activity plays an important role in the well-being of patients with Chronic Obstructive Pulmonary Disease (COPD). The telEPOC program, developed at the Galdakao-Usansolo University Hospital (Vizcaya, Spain), provided a telemonitoring data set resulting in a variable domain functional data set. In this sense, the aim is to study the impact of physical activity (measured as daily steps collected in a time interval delimited by the patient's participation in the experiment) on the rate of hospitalizations. To address this challenge, a novel basis expansion approach is proposed to fit a variable-domain functional regression model, which assumes the functional nature of the covariate (daily steps) and incorporates the sample data into the model without alignment. This will enrich the interpretability of the model by incorporating the information provided by the domain through a two-dimensional regression coefficient. In addition, a penalized estimation of the model is proposed in terms of a 2D P-spline penalty, which allows considering different degree of smoothness for each dimension of the functional regression coefficient (anisotropic penalty). The performance of our methodology is also tested and compared with state-of-the-art methods by means of a simulation study. Software for our method can be found in the VDPO R package available in CRAN., This work is supported by the grants PID2022-137243OB-I00 from the Spanish Ministry of Science, Innovation and Universities MCIN/AEI/10.13039/501100011033 and by CIAICO/2023/189 from the Conselleria de Educacion, Universidades y Empleo de la Generalitat Valenciana. This support is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Zigzag inequalities:a new class of facet-inducing inequalities for Arc Routing Problems

  • Corberán, A.
  • Plana, I.
  • Sanchís Llopis, José María|||0000-0002-0039-8122
[EN] In this paper we introduce a new class of facet-inducing inequalities for the Windy Rural Postman Problem and the Windy General Routing Problem. These inequalities are called Zigzag inequalities because they cut off fractional solutions containing a zigzag associated with variables with 0.5 value. Two different types of inequalities, the Odd Zigzag and the Even Zigzag inequalities, are presented. Finally, their application to other known Arc Routing Problems is discussed., The authors wish to thank the Ministerio de Ciencia y Tecnología of Spain (project TIC2003-05982-C05-01) and the Generalitat Valenciana (Ref: GRUPOS03/189) their support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Nanoparticles of non-porphyrinic covalent organic frameworks as contrast agents for photoacoustic imaging

  • Pi-Martín, Irene
  • VIDAURRE-AGUT, CARLA
  • Rivero-Buceta, Eva María
  • Cebrecos, Alejandro|||0000-0001-8790-8668
  • García-Garrigos, Juan José
  • Jimenez, Noe|||0000-0002-6539-670X
  • Benlloch Baviera, Jose María|||0000-0001-6073-1436
  • BOTELLA ASUNCION, PABLO|||0000-0003-2141-3069
  • Camarena Femenia, Francisco|||0000-0002-6713-1414
[EN] Photoacoustic imaging (PAI) is an emerging biomedical modality offering non-invasive, high-resolution imaging with molecular contrast. Its effectiveness for molecular imaging is improved by using external contrast agents such as dyes and nanostructures, which enable targeted imaging, deeper tissue penetration, and enhanced diagnostic accuracy. However, the clinical translation of these agents has been hindered by limitations in biocompatibility, biodegradability, and functionalization versatility. In this study, two porphyrin-free nanoscale covalent organic frameworks (nCOFs), TAPB-PDA and LZU1, were evaluated as novel exogenous contrast agents for PAI. Their photoacoustic responses were systematically measured and compared with traditional contrast agents, such as gold nanoparticles (AuNPs) and ATTO532-labelled mesoporous silica nanoparticles. Experiments at 532 nm across a range of concentrations demonstrated strong photoacoustic signals from TAPB-PDA and LZU-1, with enhanced response at higher concentrations. Besides, both nCOFs also provided detectable signals at the NIR window at the lowest concentration, indicating a broad working range. A nonlinear model of the volume-integrated photoacoustic pressure is also provided. Furthermore, in vitro cytotoxicity assays indicated excellent nCOF biocompatibility, even at higher concentrations. Photostability tests under prolonged pulsed laser irradiation revealed that both nCOFs exhibit good resistance to photobleaching and partial signal recovery under intermittent excitation. Collectively, these findings highlight the potential of TAPB-PDA and LZU-1 nCOFs as biocompatible, biodegradable, and functionally versatile contrast agents for advanced photoacoustic imaging., This work has been supported by the Agencia Estatal de Investigación (AEI, projects PID2019111436RBC22 and PID2022142952OB-100), Generalitat Valenciana through the programs Equipamiento e Infraestructuras FEDER 2021-22 IDIFEDER/2021/004, and Programa de Garantía Juvenil I+D EDGJID/2021/189, and NextGenerationEU Recovery and Resilience Facility (RRF) through the PTI+ Global Health Platform of Spanish National Research Council (grant SGL2103023). N. Jiménez is grateful for financial support from the Spanish Ministry of Science, Innovation and Universities (MICIU) through grants Juan de la Cierva Incorporación , IJC2018- 037897-I, and Ramón y Cajal RYC2021-034920-I. A. Cebrecos is grateful for financial support from Universitat Politècnica de València through programs PAID-10-19, PAID-PD-22. Irene Pi is grateful for financial support from program CIACIF/2021/403 of Generalitat Valenciana. In addition, financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033) is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Midiendo la elasticidad de tejidos biológicos empleando ultrasonidos

  • González-Mateo, Enrique
  • Rodríguez-Sendra, Josep|||0000-0001-5344-6602
  • Camarena Femenia, Francisco|||0000-0002-6713-1414
  • Jimenez, Noe|||0000-0002-6539-670X
[ES] La elastografía por ultrasonidos es una técnica de imagen médica que evalúa y mapea la elasticidad de los tejidos blandos. La elastografía proporciona información cualitativa y cuantitativa para diagnósticos, utilizando modos de imagen especializados que miden la rigidez en respuesta a fuerzas mecánicas. Esta modalidad presenta una alta sensibilidad y especificidad debido a que muchas patologías provocan grandes cambios en la rigidez de los tejidos, siendo útil en fibrosis hepática y detección y cuantificación de tumores como los de mama, tiroides o próstata. En este resumen presentamos los principios básicos de la elastografía por ultrasonidos, su relevancia clínica y revisamos las nuevas técnicas de imagen de mapas de elasticidad., [EN] Ultrasound elastography is a medical imaging technique that assesses and maps the elasticity of soft tissues. Elastography provides qualitative and quantitative diagnostic information using specialized imaging modes that measure stiffness in response to mechanical forces. This modality presents high sensitivity and specificity because many pathologies result in large changes in tissue stiffness, being particularly useful in liver fibrosis and detection and quantification of tumors such as breast, thyroid, or prostate. In this summary we present the basic principles of ultrasound elastography, its clinical relevance, and review the new elasticity mapping imaging techniques., Esta investigación ha sido apoyada por el Ministerio Español de Ciencia e Innovación y el Ministerio de Universidades a través de las Becas Ramón y Cajal RYC2021-034920-I. Agradecemos el apoyo financiero de la Agencia Estatal de Investigación (PID2019-111436RBC22 y PID2022-142719OB-C21 financiados por MCIN/ AEI/10.13039/501100011033), a la Agència Valenciana de la Innovació a través de los proyectos LITOVORTEX AP202108 y METASMART INNEST/2022/345 y a la Generalitat Valenciana a través de los programas Programa de Garantía Juvenil I+D EDGJID/2021/189 y el Programa Equipamiento e Infraestructuras FEDER 2021-22 IDIFEDER/2021/004.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A methodology to assess the energetic valorization of bio-based polymers from the packaging industry: pyrolysis of reprocessed polylactide

  • Badía Valiente, José David
  • Santonja Blasco, Laura
  • Martinez-Felipe, Alfonso
  • Ribes-Greus, A.|||0000-0003-2460-8291
The energetic valorization process of bio-based polymers is addressed in this study, taking polylactide (PLA) as model. The pyrolysis of virgin and multiple-injected PLA was simulated by means of multi-rate linear-non-isothermal thermogravimetric experiments. A complete methodology, involving control of gases, thermal stability and thermal decomposition kinetics was proposed. The release of gases was monitored by Evolved Gas Analysis of the fumes of pyrolysis, by in-line FT-IR, with the aid of 2D-correlation IR characterization. A novel model to establish the thermal stability of PLAs under any linear heating profile was proposed. A kinetic strategy was methodically applied to assess the thermal decomposition in terms of activation energy and kinetic model. It was found that the pyrolysis technologies for virgin PLA could be straightforwardly transferred for the valorization of its recyclates., The authors would like to acknowledge the Spanish Ministry of Science and Innovation for the financial support through the Research Projects ENE2007-67584-C03, UPOVCE-3E-013, ENE2011-28735-C02-01, IT-2009-0074, as well as for the pre-doctoral research position for L. Santonja-Blasco through the FPI program. The Spanish Ministry for Education is acknowledged for the concession of a pre-doctoral research position to J.D. Badia and A. Martinez-Felipe by means of the FPU program. The authors thank the financial support of the Generalitat Valenciana through the ACOMP/2011/189, the Grisolia research position for A. Martinez-Felipe, and for the Forteza technician position for J.D. Badia. Universitat Politecnica de Valencia (UPV, Spain) is thanked for additional support through the PAID 05-09-4331 and PAID 06-11-2037 projects. AIMPLAS is acknowledged for providing and processing the material. This paper is warmly dedicated to Gael Badia-Ombuena, in commemoration of his birth.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

The role of crystalline, mobile amorphous and rigid amorphous fractions in the performance of recycled poly (ethylene terephthalate) (PET)

  • Badia, J.D.
  • Strömberg, Emma
  • Karlsson, Sigbritt
  • Ribes-Greus, A.|||0000-0003-2460-8291
[EN] The action of thermo-mechanical degradation induced by mechanical recycling of poly(ethylene terephthalate) was simulated by successive injection moulding cycles. Degradation reactions provoked chain scissions and a reduction in molar mass mainly driven by the reduction of diethyleneglycol to ethylene glycol units in the flexible domain of the PET backbone, and the formation of -OH terminated species with shorter chain length. The consequent microstructural changes were quantified taking into account a three-fraction model involving crystalline, mobile amorphous (MAF) and rigid amorphous fractions (RAF). A remarkable increase of RAF, to a detriment of MAF was observed, while the percentage of crystalline fraction remained nearly constant. A deeper analysis of the melting behaviour, the segmental dynamics around the glass-rubber relaxation, and the macroscopic mechanical performance, showed the role of each fraction leading to a loss of thermal, viscoelastic and mechanical features, particularly remarkable after the first processing cycle. © 2011 Elsevier Ltd. All rights reserved., The authors would like to acknowledge the Spanish Ministry of Science and Innovation for the financial support through the Research Project UPOVCE-3E-013 and for the funding of a pre-doctoral research position to J.D. Badía by means of the FPU program conceded by the Spanish Ministry for Education. Catalana de Polimers, S.A. and AIMPLAS are acknowledged for providing and processing the material, respectively. Mr. Peter Kaali is thanked for carrying out impact tests and Mrs. Sevil Atari Jabarzadeh for helping with SEM analysis. The authors thank the financial support of the Generalitat Valenciana through the ACOMP/2011/189 and the Gerónimo Forteza grant to J.D. Badía. Universitat Politècnica de València (UPV, Spain) is thanked for additional support through the PAID 05-09-4331 program and Royal Institute of Technology (KTH, Sweden) is thanked for additional economical support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Enhancing Six Sigma with latent variable models: An industrial application of multivariate Six Sigma in the automotive sector

  • García-Carrión, Sergio
  • Pozueta, Lourdes
  • Ferrer, Alberto|||0000-0001-7244-5947
[EN] The traditional Six Sigma toolkit presents significant limitations for problem solving in Industry 4.0 settings. To address these limitations, it can be extended with latent variable-based multivariate statistical techniques such as Principal Component Analysis (PCA) and Partial Least Squares (PLS), in what has been referred to as multivariate Six Sigma. In this work, this approach is applied to address vibration performance issues in the caliper, a key component of a car's braking system. By appropriately integrating these techniques into the five-step DMAIC cycle, the root cause was satisfactorily identified, an effective corrective action was implemented, and the objectives of the project were successfully achieved. This case study provides further evidence of the practical utility of multivariate Six Sigma and demonstrates its potential for broader adoption in industrial projects., This work was supported by the Research and Development Support Program of the UPV (PAID-01-20) and by the Generalitat Valenciana (AICO/2021/111 and CIAICO/2023/189).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Impact of texture TDS and flavour TDS tasks and of chocolate-chip biscuit characteristics on oral processing features

  • Rizo, A.
  • Jimenez-Pérez, I.
  • Fiszman, S.
  • Pérez-Soriano, P.
  • Tarrega, A.
  • Camacho-García, Andrés|||0000-0001-8542-4264
[EN] The objective of the present study was to investigate differences in oral activity when biscuits of the same type but with subtle composition differences are consumed and how performing a Temporal Dominance of Sensations (TDS) task modifies the way one eats. In addition, comparisons were made between performing a texture TDS (T-TDS) and a flavour TDS (F-TDS). Oral activity while eating biscuits with and without conducting a TDS task was recorded using a 3.dimensional motion capture system to monitor the evolution of jaw movements. The results showed that oral activity evolved over the consumption time, differed depending on the texture of the sample and was affected to a small but significant extent when a TDS task was performed simultaneously (the differences averaged < 4 cycles, 1 s in duration, 0.1 cycles/s in frequency, and 1 mm in lateral displacement). The biscuit samples were affected equally. Almost no differences were found on comparing oral activity during the execution of the T-TDS and the F-TDS tasks. Overall, the present results show differences in oral activity even for food products of the same category with subtle differences in composition. Performing TDS tasks (regardless of their modality) during sample consumption affected the total number, frequency and lateral amplitude of the chewing movements which should be taken into account for future research. However, these differences were small and affected both samples equally., The authors are grateful to the Spanish Ministry of the Economy and Competitiveness (AGL-2016-75403-R, Spain) and to the Regional Government of Valencia (Project Prometeo 2017/189, Spain) for financial support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Liquid crystal polymers and ionomers for membrane applications

  • Martinez-Felipe, Alfonso
[EN] Transport phenomena through polymeric composite membranes depend on several complex factors, involving not only their chemical composition but also their microstructure. Due to the combination of mesomorphic and macromolecular behaviour, thermotropic liquid crystal polymers (LCP) may enhance the transport properties in membranes by improving parameters related to the order, orientation, connectivity and distribution of the different domains arising from phase separation. This paper provides an overview of some existing and potential applications of liquid crystals (LC) in polymeric membranes as effective structure-directing templates or as components providing a dynamic response to external stimuli. The first part is a description of the composition and phase behaviour of LCP containing ionic and ionogenic groups, the so-called liquid crystal ionomers (LCI). The second part is focused on the description of LCP and LCI used in transport applications, such as proton-conducting films in fuel cells, ionic polymer transducers and hydrogels. The paper highlights the relationships between the composition and the LC properties of the materials and their potential as membranes for ionic and solvent transport, with particular attention paid to covalently linked materials prepared by copolymerisation, due to their higher versatility and stability., The author would like to especially thank Professor Amparo Ribes-Greus, from Universitat Politecnica de Valencia, UPV, and Professor Corrie T. Imrie, from the University of Aberdeen, UoA, for their support during the discussion of this work, and also the researchers and students from the research group of Degradation and Recycling of Polymeric Materials in the Institute of Materials Technology (ITM) of UPV. Also acknowledged for their financial support are the Spanish Ministry of Science and Innovation, through the Research Projects ENE2007-67584-C03 and UPOVCE-3E-013, the Ministry of Education and Science for the awarding of two FPU and FPI pre-doctoral grants, and the financial support of the Generalitat Valenciana, through the Grisolia and the ACOMP/2011/189 program. The UPV is also thanked for additional support through the PAID 05-09-4331 programme.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A comparison of two different formulations for Arc Routing Problems on Mixed graphs

  • Corberán, A.
  • Mota, E.
  • Sanchís Llopis, José María|||0000-0002-0039-8122
[EN] Arc routing problems on mixed graphs have been modelled in the literature either using just one variable per edge or associating to each edge two variables, each one representing its traversal in the corresponding direction. In this paper, and using the mixed general routing problem as an example, we compare theoretical and computationally both formulations as well as the lower bounds obtained from them using Linear Programming based methods. Extensive computational experiments, including some big and newly generated random instances, are presented., Authors want to thank two anonymous referees for their careful reading of the manuscript. Also we thank the support given by the Ministerio de Ciencia y Tecnología of Spain through Grant TIC2003-05982-C05-01 and by the Generalitat Valenciana (Grupos 03/189).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Methods to design and evaluate transcranial ultrasonic lenses using acoustic holography

  • Andrés, Diana
  • CARRIÓN GARCÍA, ALICIA|||0000-0002-0630-6065
  • Camarena Femenia, Francisco|||0000-0002-6713-1414
  • Jimenez, Noe|||0000-0002-6539-670X
[EN] Ultrasonic three-dimensional printed holograms are getting increasing interest for transcranial therapies since they can correct skull aberrations and, simultaneously, adapt the acoustic field to particular brain targets. However, evaluating the targeting performance of these systems requires the measurement of complex volumetric acoustic fields, which in many practical situations cannot be estimated by direct hydrophone measurements. In this work, we apply single-plane holographic measurement techniques to experimentally calibrate and measure the full volumetric field produced by holographic lenses. Two ex vivo test cases are presented, a four-foci lens and a preclinical case, both targeting through a macaque skull for potential applications in blood¿brain barrier opening (BBBO) studies. Time-reversal and angular spectrum projection methods are compared to direct experimental measurements. Results show that holographic projection methods can reconstruct the complex acoustic images produced by holographic lenses, matching direct measurements in all test cases. However, while direct measurements are restricted to transverse-field cross sections, holographic projection allows estimating the field on the whole targeting volume. In this way, the location and the full three-dimensional shape of all acoustic foci can be obtained. Furthermore, these techniques can provide the field at the surface of the lens to compare it to the design phase distribution. Using this procedure, complex volumetric acoustic fields can be reconstructed, saving significant measurement time and computational resources, and enabling an accurate characterization of phase plates and other holographic lens topologies., This research has been supported by the Ministerio Espanol de Ciencia e Innovacion and the Ministerio de Universidades through Grants Juan de la Cierva-Incorporacion IJC2018-037897-I, Juan de la Cierva-Formacion FJC2019-040453-I, Ramon y Cajal RYC2021-034920-I, Formacion de Profesorado Universitario FPU19/00601. We are grateful for financial support from Agencia Estatal de Investigacion (PID2019-111436RBC22 and PID2022-142719OB-C21 funded by MCIN/AEI/10.13039/501100011033) and to the Agencia Valenciana de la Innovacio through Grants INNVA1/2022/37,INNVA2/2022/11 and METAS-MART Project INNEST/2022/345, and by Generalitat Valenciana through the programs Programa de Garan-tia Juvenil I+D EDGJID/2021/189, the Project of Ayu-das Emergentes CIGE/2021/175, the Program Prometeo CIPROM/2021/003 and the Program Equipamiento e Infraestructuras FEDER 2021-22 IDIFEDER/2021/004. We acknowledge Jose & Aacute;ngel Pineda-Pardo and CINAC (HM Hospital Puerta del Sur) for their support in providing us with the macaque ex vivo skull, TAC and MRI medi-cal images and the postcomissural putament segmentation, and Jose Luis Alonso for technical support in the design of the experimental setup.r la Cierva-Formacion FJC2019-040453-I, Ramon y Cajal RYC2021-034920-I, Formacion de Profesorado Universitario FPU19/00601. We are grateful for finan-cial support from Agencia Estatal de Investigacion (PID2019-111436RBC22 and PID2022-142719OB-C21 funded by MCIN/AEI/10.13039/501100011033) and to the Agencia Valenciana de la Innovacio through Grants INNVA1/2022/37,INNVA2/2022/11 and METAS-MART Project INNEST/2022/345, and by Generalitat Valenciana through the programs Programa de Garan-tia Juvenil I+D EDGJID/2021/189, the Project of Ayu-das Emergentes CIGE/2021/175, the Program Prome-teo CIPROM/2021/003 and the Program Equipamiento e Infraestructuras FEDER 2021-22 IDIFEDER/2021/004. We acknowledge Jose Angel Pineda-Pardo and CINAC (HM Hospital Puerta del Sur) for their support in providing us with the macaque ex vivo skull, TAC and MRI medi-cal images and the postcomissural putament segmentation, and Jose Luis Alonso for technical support in the design of the experimental setup.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Modelling and forecasting mortality in Spain

  • Debón, A.|||0000-0002-5116-289X
  • Montes, F.
  • Puig, F
[EN] Experience shows that static life tables overestimate death probabilities. As a consequence of this overestimation the premiums for annuities, pensions and life insurance are not what they actually should be, with negative effects for insurance companies or policy-holders. The reason for this overestimation is that static life tables, through being computed for a specific period of time, cannot take into account the decreasing mortality trend over time. Dynamic life tables overcome this problem by incorporating the influence of the calendar when graduating mortality. Recent papers on the topic look for the development of new methods to deal with this dynamism. Most methods used in dynamic tables are parametric, apply traditional mortality laws and then analyse the evolution of estimated parameters with time series techniques. Our contribution consists in extending and applying Lee–Carter methods to Spanish mortality data, exploring residuals and future trends., This work was partially supported by a grant from MEyC (Ministerio de Educacio´n y Ciencia, Spain, project MTM-2004-06231). The research of Francisco Montes has also been partially supported by a grant from DGITT (Direccio´ General d’Investigacio´ i Transfere`ncia Tecnolo`gica de la Generalitat Valenciana, project GRUPOS03/189).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Solving the puzzle: Simulation of multivariate data with control over the structure of columns and rows using the two-sided orthogonal procrustes problem

  • Arteaga, Francisco
  • Camacho, Jose
  • Ferrer, Alberto|||0000-0001-7244-5947
[EN] Researchers interested in developing new multivariate statistical methods often need to be able to generate multivariate datasets with specific characteristics to test the effectiveness of their data analysis algorithms under specific conditions. In this paper, we present a family of methods for generating multivariate centred datasets by simultaneously controlling features of the cross-product matrices X inverted perpendicular X and XX inverted perpendicular. This provides an interesting trade-off to control for the variance structure in the data, important for the family of algorithms that operate on the data matrix, like, e.g., Principal Component Analysis, and control for the distances among objects, important for algorithms that operate on the distance matrix, like Multidimensional Scaling. The proposed methods form a general framework that can be understood as a jigsaw puzzle, joining pieces obtained from the spectral decomposition of a target covariance matrix and the singular value decomposition of a target data matrix. These methods have in common that they are derived from a two-sided orthogonal Procrustes problem., The authors declare the following financial interests/personal re-lationships which may be considered as potential competing interests: Alberto Ferrer reports financial support was provided by the Spanish State Agency of Research with grant ref. PID2020-119262RB-I00 and by the Generalitat Valenciana with grants refs. CIAICO/2021/111 and CIAICO/2023/189. The other authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Material valorisation of amorphous polylactide. Influence of thermo-mechanical degradation on the morphology, segmental dynamics, thermal and mechanical performance

  • Badía Valiente, José David
  • Strömberg, Emma
  • Karlsson, Sigbritt
  • Ribes-Greus, A.|||0000-0003-2460-8291
[EN] This paper reports the effects of multiple mechanical recycling on the structure and properties of amorphous polylactide (PLA). The influence of the thermo-mechanical degradation induced by means of five successive injection cycles was initially addressed in terms of macroscopic mechanical properties and surface modification. A deeper inspection on the structure and morphology of PLA was associated to the thermal properties and viscoelastic behaviour. Although FT-IR analysis did not show significant changes in functional groups, a remarkable reduction in molar mass was found by viscometry. PLA remained amorphous throughout the reprocessing cycles, but the occurrence of a cold-crystallization during DSC and DMTA measurements, which enthalpy increased with each reprocessing step, suggested chain scission due to thermo-mechanical degradation. The effect of chain shortening on the glass-rubber relaxation studied by DMTA showed an increase in free volume affecting the segmental dynamics of PLA, particularly after the application of the second reprocessing step, in connection to the overall loss of performance showed by the remaining properties. © 2012 Elsevier Ltd. All rights reserved., The authors would like to acknowledge the Spanish Ministry of Science and Innovation for the financial support through the Research Project UPOVCE-3E-013 and for the funding of a predoctoral research position to J.D. Badia by means of the FPU program conceded by the Spanish Ministry for Education. The authors acknowledge the financial support of the Generalitat Valenciana through the ACOMP/2011/189. Universitat Politecnica de Valencia (UPV, Spain) is thanked for additional support through the PAID 05-09-4331 program and Royal institute of Technology (KTH, Sweden) is thanked for additional. Mr. Enrique Benavent at AIMPLAS is acknowledged for taking care of processing the material. Mr. Peter Kaali at KTH is thanked for carrying out impact tests and Mrs. Sevil Atari Jabarzadeh at KTH for helping with SEM analysis. Mrs. L. Santonja-Blasco at UPV is thanked for endless and enjoyable discussions.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A fiber-coupled laser diode design for reflection mode optical resolution photoacoustic microscopy

  • García-Garrigos, Juan José
  • Cebrecos, Alejandro|||0000-0001-8790-8668
  • Navarro-Calvo, Javier Ángel|||0000-0002-2589-873X
  • Camarena Femenia, Francisco|||0000-0002-6713-1414
[EN] Pulsed Laser Diodes (PLD) are compact and high pulse repetition rate laser sources that show a great potential for low-cost Optical Resolution Photoacoustic Microscopes (OR-PAM). Nevertheless, their non-uniform multimode laser beams are of low quality so that high lateral resolutions with tightly focused beams are difficult to realize at long focusing distances, as required for reflection mode OR-PAM devices of clinical application. A new strategy based on homogenizing and shaping the laser diode beam with a square-core multimode optical fiber allowed to attain competitive lateral resolutions while keeping one centimeter working distance. The theoretical expressions for the laser spot size, determining optical lateral resolution, and the depth of focus are also written for general multimode beams. An OR-PAM system was built in confocal reflection mode with a linear phased-array as the ultrasound receiver in order to test its performance, first, on a resolution test target and, afterwards, on ex vivo rabbit ears to show the system potential for subcutaneous imaging of blood vessels and hair follicles., We are grateful for financial support from Agencia Estatal de Investigacion, Spain (PID2019-111436RBC22/AEI/10.13039/50110001 1033), Generalitat Valenciana, Spain through the programs Equipamiento e Infraestructuras FEDER 2021-22 IDIFEDER/2021/004, Prometeo CIPROM/2021/003 and Programa de Garantia Juvenil I+D EDGJID/2021/189, Agencia Valenciana de la Innovacio INNVA2/2022/11 and INNVA1/2022/50, and the European Union - Next GenerationEU Programa Investigo INVEST/2022/171. A. Cebrecos is grateful for financial support from Universitat Politecnica de Valencia, Spain through pro-grams PAID-10-19 and Ayuda para potenciar la investigacion postdoc-toral de la UPV PAID-PD-22.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Holographic Focused Ultrasound Hyperthermia System for Uniform Simultaneous Thermal Exposure of Multiple Tumor Spheroids

  • Andrés, Diana
  • Rivens, Ian
  • Mouratidis, Petros
  • Ter Haar, Gail
  • Jimenez, Noe|||0000-0002-6539-670X
  • Camarena Femenia, Francisco|||0000-0002-6713-1414
[EN] Hyperthermia is currently used to treat cancer due to its ability to radio- and chemo-sensitize and to stimulate the immune response. While ultrasound is non-ionizing and can induce hyperthermia deep within the body non-invasively, achieving uniform and volumetric hyperthermia is challenging. This work presents a novel focused ultrasound hyperthermia system based on 3D-printed acoustic holograms combined with a high-intensity focused ultrasound (HIFU) transducer to produce a uniform iso-thermal dose in multiple targets. The system is designed with the aim of treating several 3D cell aggregates contained in an International Electrotechnical Commission (IEC) tissue-mimicking phantom with multiple wells, each holding a single tumor spheroid, with real-time temperature and thermal dose monitoring. System performance was validated using acoustic and thermal methods, ultimately yielding thermal doses in three wells that differed by less than 4%. The system was tested in vitro for delivery of thermal doses of 0-120 cumulative equivalent minutes at 43 °C (CEM43) to spheroids of U87-MG glioma cells. The effects of ultrasound-induced heating on the growth of these spheroids were compared with heating using a polymerase chain reaction (PCR) thermocycler. Results showed that exposing U87-MG spheroids to an ultrasound-induced thermal dose of 120 CEM43 shrank them by 15% and decreased their growth and metabolic activity more than seen in those exposed to a thermocycler-induced heating. This low-cost approach of modifying a HIFU transducer to deliver ultrasound hyperthermia opens new avenues for accurately controlling thermal dose delivery to complex therapeutic targets using tailored acoustic holograms. Spheroid data show that thermal and non-thermal mechanisms are implicated in the response of cancer cells to non-ablative ultrasound heating., This research has been supported by the Spanish Ministry of Science, Innovation and Universities (MICIU) through grants "Formacion de Profesorado Universitario" FPU19/00601 and EST22/00277, "Juan de la Cierva-Incorporacion", IJC2018-037897-I, and "Ramon y Cajal" RYC2021-034920-I. We are grateful for financial support from Agencia Estatal de Investigacion (PID2019-111436RBC22/AEI/10.13039/501100011033) and from Generalitat Valenciana through the programs Prometeo CIPROM/2021/003, Equipamiento e Infraestructuras FEDER 2021-22 IDIFEDER/2021/004, Programa de Garantia Juvenil I+D EDGJID/2021/189 and the European Union- Next GenerationEU Programa Investigo INVEST/2022/171. We thank also the Agencia Valencia de la Innovacio for their support through grants INNVA2/2022/11 and METASMART project INNEST/2022/345. Some UK funding was provided by the EPSRC (UKRI) network grant ThUNDDAR. Part of the activities here presented were developed in the framework of the EURAMET, European Association of National Metrology Institutes, 18HLT06 RaCHy Project that received funding from the EMPIR program, European Metrology Programme for Innovation and Research (funder ID: 10.13039/100014132) co-financed by the Participating States and from the European Union's Horizon 2020 research and innovation program.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Reprocessed polylactide: Studies of thermo-oxidative decomposition

  • Badía Valiente, José David
  • Santonja Blasco, Laura
  • Martinez-Felipe, Alfonso
  • Ribes-Greus, A.|||0000-0003-2460-8291
The combustion process of virgin and reprocessed polylactide (PLA) was simulated by multi-rate linear non-isothermal thermogravimetric experiments under O2. A complete methodology that accounted on the thermal stability and emission of gases was thoroughly developed. A new model, Thermal Decomposition Behavior, and novel parameters, the Zero-Decomposition Temperatures, were used to test the thermal stability of the materials under any linear heating rate. The release of gases was monitored by Evolved Gas Analysis with in-line FT-IR analysis. In addition, a kinetic analysis methodology that accounted for variable activation parameters showed that the decomposition process could be driven by the formation of bubbles in the melt. It was found that the combustion technologies for virgin PLA could be transferred for the energetic valorization of its recyclates. Combustion was pointed out as appropriate for the energetic valorization of PLA submitted to more than three successive reprocessing cycles, The authors would like to acknowledge the Spanish Ministry of Science and Innovation for the financial support through the Research Projects ENE2007-67584-C03, UPOVCE-3E-013, ENE2011-28735-C02-01, IT-2009-0074, as well as for the pre-doctoral research position for L. Santonja-Blasco through the FPI program. The Spanish Ministry for Education is acknowledged for the concession of a pre-doctoral research position to J.D. Badia and A. Martinez-Felipe by means of the FPU program. The authors thank the financial support of the Generalitat Valenciana through the ACOMP/2011/189, the Grisolia research position for A. Martinez-Felipe, and for the Forteza technician position. Universitat Politecnica de Valencia (UPV, Spain) is thanked for additional support through the PAID 05-09-4331 and PAID 06-11-2037 projects. AIMPLAS (Technological Institute of Plastic) is acknowledged for providing and processing the material.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Retos y propuestas ante la inminente implantación de la evaluación de destrezas orales en el examen de lengua extranjera de la futura PAU, Challenges and Proposals for new Spanish universities pre-entry exam: evaluating oral skills in foreign languages

  • Martínez Sáez, Antonio
  • Sevilla Pavón, Ana Mercedes
  • García Laborda, Jesús
  • Enríquez Carrasco, Emilia Victoria
[ES] El Ministerio de Educación ha publicado recientemente un nuevo Real Decreto que regula la Prueba de Acceso a la Universidad y contempla la incorporación de cambios en el examen de lengua extranjera, cuyo objetivo es valorar la comprensión oral y lectora, además de la expresión oral y escrita. Debido a que el hecho de examinar la comprensión y expresión oral del estudiante es un componente nuevo en este examen, los docentes de la enseñanza secundaria han mostrado sus dudas e inquietudes y han empezado a plantearse cómo tendrán que adaptar su metodología docente. Varios proyectos y estudios en la Comunidad Valenciana demuestran que es posible introducir la evaluación de las destrezas orales en la Prueba de Acceso a la Universidad. Este trabajo también presenta una serie de posibilidades para la puesta en práctica real de la evaluación de tales destrezas, considerada especialmente factible mediante sistemas informáticos. La comunicación concluye que los puntos favorables exceden a los negativos, y que los profesores cambian su forma de pensar y muestran actitudes positivas tras experimentar con las interfaces de exámenes orales asistidos por ordenador., [EN] The Spanish Ministry of Education has recently passed the new legislation that regulates the university entry exam and the introduction of a foreign language test which would include the evaluation of oral and written comprehension and production skills. The evaluation of oral skills is a new component in the foreign language university entry exam. Therefore, the education professionals are expressing their doubts and worries and are already thinking about the way in which these changes would affect or change their current educational methodology. Several projects and studies developed in the Region of Valencia confirm that the introduction of the evaluation of oral skills in the university entry examination (PAU) is possible. This paper presents a series of possibilities which would permit the evaluation of these skills, which is especially feasible through computer assisted systems. This article concludes by mentioning that the positive aspects exceed the negative ones and that teachers change their point of view and show a positive attitude after working with computer assisted exam interfaces., Desde 2008 se desarrolla la plataforma PAU-ER, dentro del proyecto PAULEX Universitas, subvencionado por el Ministerio de Ciencia e Innovación (HUM2007-66479-C02-01), y del proyecto Selector, subvencionado por la Generalitat Valenciana (GV2007/189), para el estudio de la viabilidad de la prueba con profesores y alumnos de 2º de Bachillerato.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Lower bounds and heuristics for the Windy Rural Postman Problem

  • Benavent, E.
  • Carrotta, A.
  • Corberán, A.
  • Vigo, D.
  • Sanchís Llopis, José María|||0000-0002-0039-8122
[EN] In this paper we present several heuristic algorithms and a cutting-plane algorithm for the Windy Rural Postman Problem. This problem contains several important Arc Routing Problems as special cases and has very interesting real-life applications. Extensive computational experiments over different sets of instances are also presented., The contribution by E. Benavent, A. Corberán and J.M. Sanchis has been supported by the Ministerio de Ciencia y Tecnología of Spain through grant TIC2003-05982-C05-01 (partially financed with FEDER funds) and by the Generalitat Valenciana (Ref: GRUPOS03/174 and GRUPOS03/ 189). A. Carrotta and D. Vigo thank the Ministero Dell Istruzione, dell Università e della Ricerca (M.I.U.R.) and the Consiglio Nazionale delle Ricerche (C.N.R.), Italy, for the support given to this project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Spanish students and teachers&apos, preferences towards computer-based and paper-and-pencil tests at universities

  • De-Siqueira, J.M.|||0000-0002-4579-1147
  • Peris Fajarnes, Guillermo|||0000-0001-9215-9091
  • Magal-Royo, Teresa|||0000-0002-7640-6264
  • Gimenez, Fernando
[EN] This study was conducted to identify and analyze some significant features that influence students and teachers about computer-based tests (CBT) and paper-and-pencil tests (P&P) at the context of the PAULEX Project. In order to do that, a large experiment has been developed at the Universidad Politécnica de Valencia (Polytechnic University of Valencia), Spain, in which several students and professors have answered a validated questionnaire about their usage of technology, feelings and experiences. They also compared their preferences after doing two similar basic tests, CBT and P&P., Acknowledgements are due to the Spanish Ministry of Science and Innovation for funding the PAULEX Project, to all participants of this experiment for their generous collaboration and to the Camille Research Group sponsors for cooperating.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A Comparison of Nonparametric Methods in the Graduation of Mortality: Application to Data from the Valencia Region (Spain)

  • Debón, A.|||0000-0002-5116-289X
  • Montes-Suay, Francisco
  • Sala-Garrido, Ramón
[EN] The nonparametric graduation of mortality data aims to estimate death rates by carrying out a smoothing of the crude rates obtained directly from original data. The main difference with regard to parametric models is that the assumption of an age-dependent function is unnecessary, which is advantageous when the information behind the model is unknown, as one cause of error is often the choice of an inappropriate model. This paper reviews the various alternatives and presents their application to mortality data from the Valencia Region, Spain. The comparison leads us to the conclusion that the best model is a smoothing by means of Generalised Additive Models (GAM) with splines. The most interesting part of this paper is the development of a plan that can be applied to mortality data for a wide range of age groups in any geographical area, allowing the most appropriate table to be chosen for the data in hand., The authors are indebted to the anonymous referees whose suggestions improved the original manuscript. This work was partially supported by a grant from MEyC (Ministerio de Educación y Ciencia, Spain, project MTM-2004-06231).The research of Francisco Montes has also been partially supported by a grant from DGITT (Direcció General d Investigació i Transferència Tecnològica de la Generalitat Valenciana, Project GRUPOS03/189).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A kinetic study of the formation of smectic phases in novel liquid crystal ionogens

  • Martinez-Felipe, Alfonso
  • Badia, J.D.
  • Santonja Blasco, Laura
  • Imrie, C.T.
  • Ribes-Greus, A.|||0000-0003-2460-8291
[EN] A multi-rate non-isothermal kinetic analysis of the isotropic-melt to liquid crystalline phase transition of novel liquid crystalline ionogenic copolymers, LCIs, the 10-(4-methoxyazobenzene-4'-oxy)decyl methacrylate]-co-2-(acrylamido-2-methyl-1-propanesulfonic acid)s, 10-MeOAzB/AMPS, copolymers, has been performed by means of calorimetric experiments. An analytical methodology which includes the study of the phase transition rate parameter, the determination of the activation energies by using Kissinger and Flynn-Wall-Ozawa models, and the study of the phase transition kinetics by the use of the Avrami theory, has been applied. The formation of the mesophases from the isotropic state occurred close to thermodynamic equilibrium. The results evidence the presence of several individual processes in the formation of liquid crystalline phases from the melt and a strong dependence of phase transition rates and activation energies with acid contents. A decrease in the phase transition rate, related to a decrease in the overall change of the transition entropy, has been observed. The final inhibition of the liquid crystal (LC) behaviour is ascribed to an exponential increase in the activation energy of the phase transition, promoted by strong acid aggregation. An optimum composition of the 10-MeOAzB/AMPS copolymers to achieve the dual characteristics of LCIs (ionogenic and liquid crystalline behaviour) requires acid concentrations capable of promoting structure-forming effects on the LC phases and the evolution of phase separated morphologies., The authors would like to acknowledge the Spanish Ministry of Science and Innovation, through the Research Projects ENE2007-67584-C03, UPOVCE-3E-013, ENE2011-28735-C02-01, IT-2009-0074 and three FPI and FPU predoctoral grants, and the financial support of the Generalitat Valenciana, through the Grisolia and Forteza programs and the ACOMP/2011/189 program. The Vice-rectorate for Research of UPV is also thanked for additional support through the PAID 05-09-4331, PAID-05-11/2806, and PAID 06-11-2037 projects.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

An asymmetric TSP with time windows and with time-dependent travel times and costs: An exact solution through a graph transformation

  • Albiach, José
  • Soler Fernández, David
  • Sanchís Llopis, José María|||0000-0002-0039-8122
[EN] In this paper we deal with an extended version of the Asymmetric Traveling Salesman Problem with Time Windows (ATSPTW) that considers time-dependent travel times and costs, for a more accurate approximation of some routing problems inside large cities, in which the time or cost of traversing certain streets (e.g. main avenues) depends on the moment of the day (for example rush-hours). Unlike other existing papers about time-dependent routing problems, we focus on an exact method for solving this new problem. For this end we first transform the problem into an Asymmetric Generalized TSP and then into a Graphical Asymmetric TSP. In this way, we can apply a known exact algorithm for the Mixed General Routing Problem, which seems to run well with our resulting instances. Computational results are presented on a set of 270 adapted instances from benchmark ATSPTW instances., This work has been partially supported by the Ministerio de Ciencia y Tecnología of Spain (project TIC2003-05982-C05-01) and the Generalitat Valenciana (Ref: GRUPOS03/189). Thanks are due to Michel Gendreau, Alain Hertz, Gilbert Laporte and Mihnea Stan for providing us the set of benchmark ATSPTW instances, and to Matteo Fischetti and Norbert Ascheuer for their suggestions and help about the computational experiments. Last we are also indebted to the three anonymous referees for their valuable comments.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Comparative thermal, biological and photo degradation kinetics of polylactide and effect on crystallization rates

  • Santonja Blasco, Laura
  • Alamo, R. G.
  • Ribes-Greus, A.|||0000-0003-2460-8291
[EN] A comparison is made between available literature and present results of the three major types of polylactide (PLA) degradation giving a compiled view on the details of degradation mechanisms with relation to explicit factors affecting degradation. The temporal decrease of molar mass has been analyzed under isothermal conditions at 220 degrees C, biological and photodegradation conditions using a polylactide (PLA) with similar to 4 mol% D units. The decrease of molar mass with time during biodegradation follows a first order process (M = M(o)e(-kt)) while the molar mass of specimens tested during thermal and photodegradation follows a second order law (1/M = (1/M-o) + kt) Literature data obtained in similar degradation conditions were also adequately fitted with these equations. This allows us to conclude that the main step in the three types of degradation is a random chain excision, with some differences in the algebraic functionality. Under the degradation conditions tested, the degradation rate follows the progression thermal > photo > biological. For equivalent molar mass, the effect of degradation type on cold crystallization and melting is significant indicating that degradation cannot be explained by a solely outcome of chains breakage and molar mass reduction. This feature is especially prominent when the linear growth rates of specimens subjected to bio or photo degradation are compared. Anhydride groups that are formed during photodegradation decrease the crystallization rate compared to biodegraded specimens of equivalent molar mass. The molar mass dependence of the maximum growth rate follows a power law with exponents 1.3 for bio and 1.0 for photodegraded specimens, representative of semi-entangled systems. The temperature coefficient of the growth rate, analyzed according to secondary nucleation leads to a linear dependence for bio and photodegraded specimens, and to values of the surface free energy of crystallites that decrease from similar to 85 to 55 erg/cm(2) with decreasing molar mass. Combinations of molar mass characterization, FTIR, and thermal and crystallization rate analysis are proven useful strategies to assess and discriminate macroscopic changes of PLA structure induced by different types of degradation. This work also underlines the importance of analyzing the linear growth rates as a parameter that uncovers specific structural changes during degradation. (c) 2012 Elsevier Ltd. All rights reserved., The authors thank the USA National Science Foundation for partial funding of this work. Also acknowledged are the Spanish Ministry of Science and Innovation, Research Projects ENE2007-67584-C03-02, UPOVCE-3E-013, ENE2011-28735-C02-01, FPI predoctoral grant to L.Santonja-Blasco, and support from the Generalitat Valenciana, through the ACOMP/2011/189 project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Bioactive zinc-doped sol-gel coating modulates protein adsorption patterns and in vitro cell responses

  • Cerqueira, A.
  • Romero-Gavilán, F.
  • García-Arnáez, I.
  • Ozturan, S.
  • Iloro, I.
  • Azkargorta, M.
  • Elortza, F.
  • Izquierdo, R.
  • Gurruchaga, M.
  • Goñi, I.
  • Suay, J.
  • Martínez-Ramos, Cristina|||0000-0002-6540-4714
[EN] Zinc is an essential element with an important role in stimulating the osteogenesis and mineralization and suppressing osteoclast differentiation. In this study, new bioactive ZnCl2-doped sol-gel materials were designed to be applied as coatings onto titanium. The biomaterials were physicochemically characterized and the cellular responses evaluated in vitro using MC3T3-E1 osteoblasts and RAW264.7 macrophages. The effect of Zn on the adsorption of human serum proteins onto the material surface was evaluated through nLC-MS/MS. The incorporation of Zn did not affect the crosslinking of the sol-gel network. A controlled Zn2+ release was obtained, reaching values below 10 ppm after 21 days. The materials were no cytotoxic and lead to increased gene expression of ALP, TGF-beta, and RUNX2 in the osteoblasts. In macrophages, an increase of IL-1 beta, TGF-beta, and IL-4 gene expression was accompanied by a reduced TNF-alpha liberation. Proteomic results showed changes in the adsorption patterns of proteins associated with immunological, coagulative, and regenerative functions, in a Zn dose-dependent manner. The variations in protein adsorption might lead to the downregulation of the NF-kappa B pathway, thus explain the observed biological effects of Zn incorporation into biomaterials. Overall, these coatings demonstrated their potential to promote bone tissue regeneration., This work was supported by MINECO [MAT2017-86043-R; RTC2017-6147-1], Generalitat Valenciana [GRISOLIAP/2018/091], Universitat Jaume I under [UJI-B2017-37, Posdoc/2019/28], the University of the Basque Country under [GIU18/189] and Basque Government under [PRE_2017_2_0044]. The authors would like to thank Raquel Oliver, Jose Ortega and Iraide Escobes for their valuable technical assistance, and Antonio Coso (GMI-Ilerimplant) for producing the titanium discs.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Spatial resolution and reconstructed size accuracy using advanced beamformers in linear array-based PAT systems

  • Pi-Martín, Irene
  • Cebrecos, Alejandro|||0000-0001-8790-8668
  • García-Garrigos, Juan José
  • Jimenez, Noe|||0000-0002-6539-670X
  • Camarena Femenia, Francisco|||0000-0002-6713-1414
[EN] Limitations associated with linear-array probes in photoacoustic tomography are partially compensated by using advanced beamformers that exploit the temporal and spatial coherence of the recorded signals, such as Delay Multiply and Sum (DMAS), Minimum Variance (MV) or coherence factor (CF), among others. However, their associated signal processing leads to an overestimation of the spatial resolution, as well as alterations in the reconstructed object size. Numerical and experimental results reported here support this hypothesis. First, we show that the Rayleigh criterion (RC) is the most suitable choice to characterize the spatial resolution instead of the Point Spread Function (PSF) when considering advanced beamformers. Then, we observe that several advanced beamformers fail to properly reconstruct target sizes slightly above the spatial resolution, underestimating their size. This work sheds light on the suitability of this type of beamformers combined with linear probes for determining sizes and morphology in photoacoustic images., We are grateful for financial support from Agencia Estatal de Investigación (PID2019-111436RBC22 and PID2022-142719OB-C21), Generalitat Valenciana through the programs Equipamiento e Infraestructuras FEDER 2021-22 IDIFEDER/2021/004 and Programa de Garantía Juvenil I+D EDGJID/2021/189, and Agéncia Valenciana de la Innovació through Grant INNVA1/2022/50. N. Jiménez is grateful for financial support from the Spanish Ministry of Science, Innovation and Universities (MICIU) through grants Juan de la Cierva - Incorporación , IJC2018-037897-I and Ramón &#119910; Cajal RYC2021-034920-I. A. Cebrecos is grateful for financial support from Universitat Politècnica de València through programs PAID-10-19 PAID-PD-22. Irene Pi is grateful for financial support from Generalitat Valenciana through programme CIACIF/2021/403.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Understanding the effect of emulsifiers on bread aeration during breadmaking

  • Garzon, Raquel
  • Molina Rosell, Maria Cristina
  • Hernando Hernando, Mª Isabel|||0000-0002-3322-935X
  • Llorca Martínez, Mª Empar|||0000-0003-3346-3135
[EN] BACKGROUNDMuch research has been done to explain the action of emulsifiers during breadmaking, but there is still plenty unknown to elucidate their functionality despite their diverse chemical structure. The aim of the present study was to provide some light on the role of emulsifiers on air incorporation into the dough and gas bubbles progress during baking and their relationship with bread features. Emulsifiers like diacetyl tartaric acid ester of monoglycerides (DATEM), sodium stearoyl lactylate (SSL), distilled monoglyceride (DMG-45 and DMG-75), lecithin and polyglycerol esters of fatty acids (PGEF) were tested in very hydrated doughs. RESULTSEmulsifiers increase the maximum dough volume during proofing. Emulsifiers increase the number of bubbles incorporated during mixing, observing higher number of bubbles, particularly with PGEF. Major changes in dough occurred at 70K when bubble size augmented, becoming more heterogeneous. DMG-75 produced the biggest bubbles. As a consequence, emulsifiers tend to increase the number of gas cells with lower size in the bread crumb, but led to greater crumb firmness, which suggested different interactions between emulsifiers and gluten, affecting protein polymerization during baking. CONCLUSIONThe progress of the bubbles during baking allowed the differentiation of emulsifiers, which could explain their performance in breadmaking. (c) 2018 Society of Chemical Industry, Authors acknowledge the financial support of the Spanish Ministry of Economy and Competitiveness (Project AGL2014-52928-C2-1-R), the European Regional Development Fund (FEDER) and Generalitat Valenciana (Project Prometeo 2017/189).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Hygrothermal ageing of reprocessed polylactide

  • Badia, J.D.
  • Santonja Blasco, Laura
  • Martinez-Felipe, Alfonso
  • Ribes-Greus, A.|||0000-0003-2460-8291
[EN] The influence of an accelerated hygrothermal ageing simulation test on a commercial PLA and its three subsequent mechanically-reprocessed materials was studied. The analysis was focused on the water diffusion kinetics and the physico-chemical changes induced by the hygrothermal degradation. Water diffusion proceeded faster than chain relaxation processes, as defined by a Case II absorption model. It was proved that the water diffusion rate decreased with subsequent reprocessing cycles and increased with higher hygrothermal ageing temperatures. Hydrolytic chain scission provoked significant molar mass decays and consequent general losses of thermal and mechanical performance. The rearrangement into crystalline fractions of shorter chains provoked by hygrothermal ageing was qualitatively and quantitatively followed by both Fourier-Transform Infrared Spectroscopy and Differential Scanning Calorimetry. The microstructural changes were monitored by the cold-crystallization temperature, the crystallinity degree XC and the absorbance intensity ratio I921/I955. A Weibull model showed that the crystallites were formed faster at higher reprocessing cycles and at lower hygrothermal ageing temperatures. All these effects were particularly significant for PLA reprocessed more than one time., B.Sc. Oscar Gil-Castell is acknowledged for his dedication in the lab and his outstanding attitude towards learning. The authors thank the Spanish Ministry of Science and Innovation, through the Research Projects ENE2011-28735-C02-01 and UPOVCE-3E-013, the Ministry of Education and Science for the awarding of the FPI pre-doctoral grant to L. Santonja-Blasco and FPU pre-doctoral grants to A. Martinez-Felipe and J.D. Badía. The financial support of the Generalitat Valenciana, through the Grisolia (A. Martinez-Felipe) and Forteza (J.D. Badia) programs and the ACOMP/2011/189. UPV is thanked for additional support through the PAID 05-09-4331 program and the PAID 04-11 for the allowance conceded to attend to the III International Conference on Biodegradable and Biobased Polymers (BIOPOL2011) in Strasbourg.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Study of Structure Formation in Side-Chain Liquid Crystal Copolymers by Variable Temperature Fourier Transform Infrared Spectroscopy

  • Martinez-Felipe, Alfonso
  • Imrie, Corrie Thomas
  • Ribes-Greus, A.|||0000-0003-2460-8291
The formation of smectic phases in side-chain liquid crystal copolymers, SCLCPs, containing sulfonic acid-based nonmesogenic units, has been investigated using variable temperature FT-IR microscopy. Two copolymers have been characterized, namely, the poly[10-(4-methoxy-4′-oxy-azobenzene) decyl methacrylate]−copoly[2-acrylamido-2-methyl-1- propanesulfonic acid]s, the X-MeOAzB/AMPS copolymers, containing X = 0.71 and 0.56 mol fraction of mesogenic sidechains, respectively. For comparative purposes the corresponding side chain liquid crystal homopolymer, poly[10-(4-methoxy-4′- oxy-azobenzene) decyl methacrylate], MeOAzB, has also been characterized. The 0.56-MeOAzB/AMPS copolymer exhibits a bilayer smectic A phase, in which the mesogenic side chains constitute one layer with a SmA1 packing arrangement and the sulfonic acid groups another; whereas in the smectic A phase shown by the 0.71-MeOAzB/AMPS copolymer, the acid groups are located within the smectic layers giving a partially interdigated SmAd phase and reducing side chain packing efficiency. Smectic stabilization is attributed to a combination of stronger interactions involving the ester groups, as reflected in changes to the C O stretching band at ν ∼ 1730 cm−1 , and hydrogen bonding between the amide groups within the acid-based layers, as inferred by changes to the NH stretching band at ν ∼ 3320 cm−1 . The temperature response observed for groups with different chemical environments permits the mapping of the short-range interactions between the various structural components in SCLCPs with a view to controlling the functionality of the materials., This paper is meant to be a tribute and recognition to the research activity of Professor Giulio Sarti. The authors also thank the Spanish Ministry of Science and Innovation, through the Research Projects ENE2007-67584-C03, UPOVCE-3E-013, IT2009-0074, ENE2011-28735-C02-01 and two FPI and FPU predoctoral grants, and the financial support of the Generalitat Valenciana, through the Grisolia (GRISOLIAP/2010/057, GRISOLIAP/2012/056, GRISOLIAP/2013/A/036) and Forteza programs and the ACOMP/2011/189 program. The UPV is also thanked for additional support through the PAID 05-09-4331 and PAID-06-11 program.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Characterization of magnesium doped sol-gel biomaterial for bone tissue regeneration: the effect of Mg ion in protein adsorption

  • Cerqueira, Andreia
  • Romero-Gavilán, Francisco
  • García-Arnáez, Iñaki
  • Ozturan, Seda
  • Izquierdo, Raúl
  • Azkargorta, Mikel
  • Elortza, Félix
  • Gurruchaga, Mariló
  • Suay, Julio
  • Goñi, Isabel
  • Martínez-Ramos, Cristina|||0000-0002-6540-4714
[EN] Magnesium is the fourth most abundant element in the human body with a wide battery of functions in the maintenance of normal cell homeostasis. In the bone, this element incorporates in the hydroxyapatite structure and it takes part in mineral metabolism and regulates osteoclast functions. In this study, sol-gel materials with increasing concentrations of MgCl2 (0.5, 1, and 1.5%) were synthesized and applied onto Ti surfaces as coatings. The materials were first physicochemically characterized. In vitro responses were examined using the MC3T3-E1 osteoblastic cells and RAW264.7 macrophages. Human serum protein adsorption was evaluated employing nLC-MS/MS. The incorporation of Mg did not affect the crosslinking of the sol-gel network, and a controlled release of Mg was observed; it was not cytotoxic at any of the tested concentrations. The cytoskeleton arrangement of MC3T3-E1 cells cultured on the Mg-doped materials changed in comparison with controls; the cells became more elongated, with protruded lamellipodia and increased cell surface. The expression of integrins (ITGA5 and ITGB1) was boosted by Mg-coatings. The ALP activity and expression of TGF-beta, OSX and RUNX2 genes were also increased. In RAW264.7 cells, TNF-alpha secretion was reduced, while TGF-beta and IL-4 expression rose. These changes correlated with the altered protein adsorption patterns. The Mg-doped coatings showed increased adsorption of anti-inflammatory (CLUS, IC1, CFAH, and VTNC), cell adhesion (DSG1, FILA2, and DESP) and tissue regeneration (VTNC and CYTA) proteins. This integrated approach to biomaterial characterization revealed the potential of Mg in bone tissue regeneration., This work was supported by MINECO [MAT2017-86043-R; RTC2017-6147-1], Generalitat Valenciana [GRISOLIAP/2018/091, APOSTD/2020/036, PROMETEO/2020/069], Universitat Jaume I under [UJI-B2017-37, Posdoc/2019/28], the University of the Basque Country under [GIU18/189] and Basque Government under [PRE_2017_2_0044]. The authors would like to thank Raquel Oliver, Jose Ortega, Jos ' e Miguel Pedra and Iraide Escob ' es for their valuable technical assistance and Antonio Coso (GMI-Ilerimplant) for producing the titanium discs.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Absence of CX3CR1 impairs the internalization of Tau by microglia

  • Bolós, Marta
  • Llorens-Martín, María
  • Perea, Juan Ramón
  • Jurado-Arjona, Jerónimo
  • Rábano, Alberto
  • Hernández Pérez, Félix
  • Ávila, Jesús
[Background] Extracellular Tau is toxic for neighboring cells, and it contributes to the progression of AD. The CX3CL1/CX3CR1 axis is an important neuron/microglia communication mechanism., [Methods] We studied Tau clearance by microglia both in vitro (microglia primary cultures treated with Cy5-Tau, affinity chromatography to study the binding of Tau to CX3CR1, and Tau-CX3CL1 competition assays) and in vivo (stereotaxic injection of Cy5-Tau into WT and CX3CR1−/− mice). The expression of CX3CR1, CX3CL1 and the microglial phagocytic phenotype were studied in brain tissue samples from AD patients., [Results] Tau binding to CX3CR1 triggers the internalization of the former by microglia, whereas S396 Tau phosphorylation decreases the binding affinity of this protein to CX3CR1. Of note, the progressive increase in the levels of phosho-Tau occurred in parallel with an increase in CX3CR1. In addition, our studies suggest that the phagocytic capacity of microglia in brain tissue samples from AD patients is decreased. Furthermore, the CX3CR1/CX3CL1 axis may be impaired in late stages of the disease., [Conclusions] Our data suggest that the CX3CR1/CX3CL1 axis plays a key role in the phagocytosis of Tau by microglia in vitro and in vivo and that it is affected as AD progresses. Taken together, our results reveal CX3CR1 as a novel target for the clearance of extracellular Tau., This study was funded by grants from the Spanish Ministry of Economy and Competitiveness (SAF-2014-53,040-P (Jesús Ávila) and RYC-2015-17,189 (María Llorens-Martín)), the Centro de Investigasción Biomédica en Red sobre Enfermedades Neurodegeneritivas (CIBERNED, ISCIII) (Jesús Ávila), the Alzheimer’s Association (2015-NIRG-340709) (María Llorens-Martín), and the Association for Frontotemporal Degeneration (AFTD) (Basic Science Pilot Grant Award 2016 (María Llorens-Martín))., Peer reviewed
ReDivia Repositorio Digital del Instituto Valenciano de Investigaciones Agrarias
Publication Artículo científico (JournalArticle)

Nutraceutical profiles of apricots (Prunus armeniaca L.) as a source of fruit quality traits for breeding

  • Gómez-Martínez, Helena
  • Bermejo, Almudena
  • Badenes, María L.
  • Zuriaga, Elena
Aim of study: In a social context of increasing concern about healthy diets, the development of new varieties with enhanced content in nutraceutical compounds is an important objective of the fruit breeding programs currently developed. In this sense, apricot is a fruit crop very appreciated by consumers worldwide due to its organoleptic characteristics, but also plays an important role in human nutrition due to its content of phytocompounds as sugars, organic acids, vitamins and polyphenols. Area of study: The identification of sources of variation for these traits could be useful for apricot breeding worldwide. Material and methods: New selections from the apricot breeding program carried out at the Instituto Valenciano de Investigaciones Agrarias (IVIA, Spain) and traditional varieties have been analysed aimed at identifying sources of genetic variation for fruit quality. For this purpose, sugar content, organic acids and ascorbic acid were studied during three crop years. Main results: Results revealed sucrose and glucose as the major sugars, malic and citric acid as the main organic acids, and diverse ascorbic acid content among the cultivars studied. Research highlights: Some accessions point as potential sources to increase fruit quality. In addition, the study showed that apricot peel is an excellent source of nutraceutical compounds. Moreover, this study opens up new possibilities to study the genetic control of these traits in apricot in the future.