Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 87
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Design and assessment of a concentrating solar thermal system for industrial process heat with a copper slag packed-bed thermal energy storage

  • David-Hernandez, Marco Antonio
  • Cazorla-Marín, Antonio|||0000-0003-3314-0395
  • Calderon-Vásquez, Ignacio
  • Battisti, Felipe G.
  • Cardemil, José M.
[EN] Decarbonising the industrial sector is a key part of climate change mitigation targets, and Solar Heat for Industrial Process (SHIP) is a promising technology to achieve this. However, one of the drawbacks of SHIP systems is that they rely on an intermittent energy source. Therefore, sensible energy storage has emerged as a potential solution. In addition, solid byproducts have been proposed as a low-cost but effective material for thermal energy storage (TES). This work presents a SHIP system model coupled with a copper slag-packed-bed TES (PBTES) model using air as heat transfer fluid. The TES has been implemented to preheat the makeup water of the tank where steam is generated. A system design was carried out using a parametric analysis to find a solar field size and a corresponding TES volume. The resulting system was simulated, and the operating variables were analysed in detail. The results show that it is possible to generate 20% more energy due to the storage system. Additionally, a techno-economic analysis indicates that the SHIP with PBTES system results in a payback period of 14 years and a savings of CO2 emissions of 30 t CO2., This work was partially supported by the Research and Development Aid Program (PAID-01-20) of the Universitat Politecnica de Valencia for receiving the Research Fellowship FPI-UPV.2020, as well as the "Programa de Movilidad para estudiantes de doctorado" of the Universitat Politecnica de Valencia. This publication has also been partially supported by the project "DECARBONIZACION DE EDIFICIOS E INDUS-TRIAS CON SISTEMAS HI BRIDOS DE BOMBA DE CALOR", founded by the Spanish "Ministerio de Ciencia e Innovacion (MICIN) " with code number PID2020-115665RB-I00, as well as the R & D project Solar-Steam4IND (TED2021-130614 A -I00) , funded by MICIN/AEI/10.130 39/501100011033 and by the European Union NextGeneration EU/PRTR 2021 call. F. G. Battisti acknowledges the funding from ANID/CONICYT through FONDECYT Postdoctorado 2022 #3220792. J. M. Cardemil and F. G. Battisti acknowledge the financial support from project ANID/FONDAP/1523A0006 "Solar Energy Research Center (SERC) Chile".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Functionalization of polyethylene with hydrolytically-stable ester groups

  • Hervàs-Arnandis, Susi
  • Oliver-Meseguer, Judit|||0000-0003-1555-3583
  • Leyva Perez, Antonio|||0000-0003-1063-5811
  • Palomar-De Lucas, Brenda
  • Bilanin-Artigado, Cristina
  • Mingueza-Verdejo, Paloma
  • Viciano, Mónica
[EN] Low-density (LD) and high-density polyethylene (HDPE), recycled or not, incorporates up to 7 wt% of ester groups after reacting either with ethyl diazoacetate (EDA) under catalytic and solvent free-reaction conditions, or with maleic anhydride (MA) and acrylates (AC) under catalytic radical conditions. The resulting upcycled polyethylene esters are hydrolytically stable at extreme pH (0-14) and can be further transformed into carboxylic acids, carboxylates, other esters and amides., Financial support by the projects PID2020-115100GB-I00 and TED2021-130465B-I00 (funded by Spanish MCIINN, MCIN/AEI/10.13039/501100011033MICIIN) is acknowledged. The work has also been funded by Generalitat Valenciana, Grupos Emergentes (GV/2021/138). AIMPLAS author thanks Instituto Valenciano de Competitividad Empresarial (IVACE) the founding from the project IMAMCA/2023/4. AIMPLAS and ITQ authors thank Agencia Valenciana d'Innovacio (AVI) and the European Union the founding of the project INNEST/2022/18. J. O.-M. acknowledges the Juan de la Cierva program for the concession of a contract (IJC2018-036514-I). S. H.-A, and C. B. and P. M.-V. thank ITQ, UPV-CSIC for the concession of a contract (FPI-2022-S2-42040 and PAID 01-20, respectively).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A General Optimal Iterative Scheme with Arbitrary Order of Convergence

  • Cordero Barbero, Alicia|||0000-0002-7462-9173
  • Torregrosa Sánchez, Juan Ramón|||0000-0002-9893-0761
  • Triguero-Navarro, Paula|||0000-0002-7319-9992
[EN] A general optimal iterative method, for approximating the solution of nonlinear equations, of (n+1) steps with 2(n+1) order of convergence is presented. Cases n=0 and n=1 correspond to Newton's and Ostrowski's schemes, respectively. The basins of attraction of the proposed schemes on different test functions are analyzed and compared with the corresponding to other known methods. The dynamical planes showing the different symmetries of the basins of attraction of new and known methods are presented. The performance of different methods on some test functions is shown., This research was partially supported by PGC2018-095896-B-C22 (MCIU/AEI/FEDER, UE).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Treatment of Dyspareunia with Botulinum Neurotoxin Type A: Clinical Improvement and Influence of Patients&apos, Characteristics

  • Tarazona-Motes, Marta
  • Albaladejo-Belmonte, Mónica
  • Nohales-Alfonso, Francisco J.
  • De-Arriba, Maria
  • Alberola-Rubio, Jose
  • Garcia-Casado, Javier|||0000-0003-1410-2721
[EN] The treatment of chronic pelvic pain (CPP) with botulinum neurotoxin type A (BoNT/A) has increased lately, but more studies assessing its effect are needed. This study aimed to evaluate the evolution of patients after BoNT/A infiltration and identify potential responders to treatment. Twenty-four women with CPP associated with dyspareunia were treated with 90 units of BoNT/A injected into their pelvic floor muscle (PFM). Clinical status and PFM activity were monitored in a previous visit (PV) and 12 and 24 weeks after the infiltration (W12, W24) by validated clinical questionnaires and surface electromyography (sEMG). The influence of patients' characteristics on the reduction in pain at W12 and W24 was also assessed. After treatment, pain scores and the impact of symptoms on quality of life dropped significantly, sexual function improved and sEMG signal amplitude decreased on both sides of the PFM with no adverse events. Headaches and bilateral pelvic pain were risk factors for a smaller pain improvement at W24, while lower back pain was a protective factor. Apart from reporting a significant clinical improvement of patients with CPP associated with dyspareunia after BoNT/A infiltration, this study shows that clinical characteristics should be analyzed in detail to identify potential responders to treatment., This study was funded by Universitat Politecnica de Valencia in Programa de Ayudas de Investigacion y Desarrollo (PAID-01-20), ISCIII, MCIU, VLC Campus in Convocatoria Ayudas: UPV-La Fe (INBIO): 2016 SPEHG (ID:C18), 2019 sEMG_BONTAv (ID:C06) and funds from private contracts with Merz Pharmaceuticals GmbH S.L.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Jacobian-Free Vectorial Iterative Scheme to Find Simple Several Solutions Simultaneously

  • Cordero Barbero, Alicia|||0000-0002-7462-9173
  • Torregrosa Sánchez, Juan Ramón|||0000-0002-9893-0761
  • Triguero-Navarro, Paula|||0000-0002-7319-9992
[EN] This manuscript is devoted to a derivative-free parametric iterative step to obtain roots simultaneously for both nonlinear systems and equations. We prove that when it is added to an arbitrary scheme, it doubles the convergence order of the original procedure and defines a new algorithm that obtains several solutions simultaneously. Different numerical experiments are carried out to check the behavior of the iterative methods by changing the value of the parameter and the initial guesses. Also, it performs a numerical example where the dynamical planes are carried out to see and compare the basins of attraction., This research was partially supported by Centro Universitario EDEM - Escuela de Empresarios, Valencia, Spain and by Universitat Politécnica de Valéncia Contrato Predoctoral PAID-01-20-17 (UPV).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

An iterative scheme to obtain multiple solutions simultaneously

  • Cordero Barbero, Alicia|||0000-0002-7462-9173
  • Garrido-Saez, Neus|||0000-0002-7903-8591
  • Torregrosa Sánchez, Juan Ramón|||0000-0002-9893-0761
  • Triguero-Navarro, Paula|||0000-0002-7319-9992
[EN] In this manuscript, we propose an iterative step that, combined with any other method, allows us to obtain an iterative scheme for approximating the simple roots of a polynomial simultaneously. We show that adding this step, the order of convergence of the new scheme is tripled respect to the original one. With this idea, we also present an iterative method that obtains multiple solutions of any nonlinear equation simultaneously, without the need to know the multiplicity of the solutions. We conclude with several numerical experiments to confirm the behaviour of the proposed methods.& COPY; 2023 The Authors. Published by Elsevier Ltd. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/)., This research was partially supported by Universitat Politecnica de Valencia Contrato Predoctoral PAID-01-20-17 (UPV), Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Flexible All-Optical Remote Frequency Conversion of 5G Signals to FR1 and FR2 Bands Employing an Optical Comb and Multi-Core Fiber for Next-Generation C-RAN Fronthaul

  • Fito-Estevan, Vicente
  • Maria Morant|||0000-0001-5565-7788
  • Roberto Llorente|||0000-0003-4799-2564
[EN] The rapid deployment of 5G wireless networks demands efficient, high performance, dynamically reconfigurable solutions for seamless multi-band frequency conversion and connectivity provision. Efficient centralized radio access networks (C-RAN) can benefit from an all-optical signal conversion and remoting employing optical frequency combs and multicore fiber (MCF) as optical source and transmission media respectively. This paper proposes and evaluates experimentally an all-optical frequency conversion approach based on an optical frequency comb (OFC) generated using a dualdrive Mach-Zehnder modulator (DD-MZM) and transmitted through MCF. The proposed method enables seamless frequency up- and down-conversion across sub-6 GHz and millimeter-wave (mm-wave) bands, leveraging optical heterodyning to achieve low-distortion signal transmission in next-generation C-RAN fronthaul implementations. The performance of the system is evaluated in terms of signal-to-noise ratio (SNR) and error vector magnitude (EVM) of the frequency-converted 5G signals. The results demonstrate that frequency-converted replicas exhibit minimal EVM degradation, with values consistently below 10.5%, ensuring compliance with 3GPP 5G NR standards. Additionally, we analyze how the modulation order affects the 5G performance, finding that lower-order orthogonal frequency division multiplexing (OFDM) schemes (e.g., QPSK) maintain robust performance at lower SNRs, while higher-order OFDM schemes (e.g., 64QAM and 256QAM) require higher SNRs for satisfactory performance meeting 3GPP threshold recommendations. Furthermore, we explore the role of multiple modulated optical carriers over the MCF media, showing that increasing the number of modulated carriers improves SNR and reduces the fluctuation of the received EVM. The EVM fluctuation is measured for different configurations, using one or two modulated optical carriers. The maximum access network reach is calculated by measuring the power margin available using the same receiver. Considering the propagation losses and expected crosstalk-induced SNR penalty of a 7-core MCF, a 23.6 km extension could be reached when using two modulated carriers for optical heterodyning compared with a single modulated carrier without frequency conversion. Finally, the impact of power balance of the optical carriers used for optical heterodyning is also evaluated in terms of EVM and SNR of the original and upconverted signals. These findings highlight the potential of MCF networks using an OFC for the transmission of 5G signals as a scalable solution for next-generation C-RAN supporting agile reconfiguration in multiple frequency bands., This work was supported in part by Spanish Ministry of Science and Innovation (MCIN) funded by MCIN/AEI/10.13039/501100011033 and by the European Union FEDER/UE under Project iPHOEBE PID2023-152410OB-I00. The work of Vicente Fito supported by the Universitat Politecnica de Valencia under Grant PAID-01-20 UPV. Funding for open access charge: Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis doctoral (DoctoralThesis)

Ensordecimientos, silenciamientos y respuestas sonoras en el conflicto armado: una aproximación acustemológica y artística al caso colombiano

  • Díaz Ramos, Estefanía
[ES] La presente tesis doctoral recoge un análisis del conflicto armado prolongado en Colombia desde una perspectiva acustemológica, entendiendo el sonido y la escucha como formas de conocimiento situadas, y lugares en donde se pueden disputar el poder, la memoria y el territorio. Este trabajo se centra en las sonoridades cotidianas del conflicto, en los regímenes de silenciamiento y ensordecimiento que imponen los diferentes grupos armados y algunas instituciones para sostenerlo, y en las prácticas de creación sonora -artísticas y comunitarias- que buscan contribuir al des-ensordecimiento y la reparación acústica de los daños causados. La investigación se inscribe metodológicamente en los estudios cualitativos, y se despliega en cuatro niveles articulados entre sí: el primero relacionado con la construcción de un marco conceptual que reflexiona alrededor de las formas en las que se puede pensar un conflicto armado prolongado en clave sonora; el segundo, que propone una lectura situada del conflicto armado colombiano a partir del andamiaje conceptual construido; el tercero, en el que se configura una tipología de estrategias de reparación acústica y des-ensordecimiento desde el análisis de manifestaciones de creación sonora en escenarios de conflicto; y el cuarto, que se encuentra vinculado a la exploración de una práctica de investigación-creación personal, basada en testimonios de víctimas del conflicto armado colombiano y orientada al des-ensordecimiento y la reparación acústica. A través de un diálogo entre formas de construcción de conocimiento que buscan articular acustemología, Teoría Fundamentada e investigación-creación, esta tesis propone una forma de establecer vínculos entre la teoría y la práctica artística. De esta manera, además de consolidar una batería de conceptos para leer el conflicto armado colombiano desde una perspectiva sonora, con esta investigación se busca: (1) identificar y sistematizar repertorios y estrategias de creación sonora que surgen como respuestas a escenarios de conflicto, y (2) poner a prueba estas herramientas mediante un método que deviene en la práctica artística personal. Así, por medio de la codificación de testimonios de víctimas del conflicto - extraidos del Tomo Testimonial. Cuando los pájaros no cantaban. Historias de conflicto armado en Colombia, realizado por la Comisión para el Esclarecimiento de la Verdad, la Convivencia y la No Repetición- en clave sonora, y su traducción en matrices generadoras de ideas y procesos de creación artística personal, esta investigación cierra con una serie de procesos exploratorios situados de escucha, análisis y diseño de dispositivos, sostenidos en criterios éticos que pretenden evitar la revictimización y la espectacularización del sufrimiento., [EN] This doctoral dissertation presents an analysis of the prolonged armed conflict in Colombia from an acous­temological perspective, understanding sound and listening as situated forms of knowledge and as sites where power, memory, and territory are contested. The study focuses on the everyday soundscapes of the conflict, on the regimes of silencing and deafening imposed by different armed groups and certain institutions to sustain it, and on sound-based creative practices¿both artistic and community-driven¿that seek to contribute to de- deafening and to the acoustic repair of the damage caused. Methodologically, the research is situated within qualitative inquiry and unfolds across four interrelated levels: the first concerns the construction of a conceptual framework that reflects on the ways in which a prolonged armed conflict can be understood through a sound-based lens; the second proposes a situated reading of the Colombian armed conflict based on the conceptual scaffolding developed; the third configures a typology of strategies for acoustic repair and de-deafening through the analysis of sound creation practices in conflict settings; and the fourth is linked to the exploration of a personal research-creation practice, grounded in testimonies of victims of the Colombian armed conflict and oriented toward de- deafening and acoustic repair. Through a dialogue among modes of knowledge production that articulate acous­temology, Grounded Theory, and research-creation, this dissertation proposes a way of establishing connections between theory and artistic practice. In this sense, beyond consolidating a conceptual toolkit for reading the Colombian armed conflict from a sound-based perspective, the research aims to: (1) identify and systematize repertoires and strategies of sound creation that emerge in response to conflict scenarios, and (2) test these tools through a method that unfolds into a personal artistic practice. Thus, through the sound-based coding of testimonies of conflict victims¿drawn from the Tomo Testimonial. Cuando los pájaros no cantaban. Historias de conflicto armado en Colombia, produced by the Comisión para el Esclarecimiento de la Verdad, la Convivencia y la No Repetición¿ and their translation into generative frameworks for ideas and processes of personal artistic creation, the research concludes with a series of situated exploratory processes of listening, analysis, and device design, grounded in ethical criteria aimed at avoiding re- victimization and the spectacularization of suffering., [CA] Aquesta tesi doctoral inclou una anàlisi del conflicte armat prolongat a Colòmbia des d'una perspectiva acustemològica, entenent el so i l'escolta com a formes de coneixement situades, i llocs on es poden disputar el poder, la memòria i el territori. El treball se centra en les sonoritats quotidianes del conflicte, en els règims de silenciament i ensordiment que imposen els diferents grups armats i algunes institucions per a sostenir-lo, i en les pràctiques de creació sonora - artístiques i comunitàries- que busquen contribuir al des-ensordiment i la reparació acústica dels danys causats. La investigació s'inscriu metodològicament en els estudis qualitatius, i es desplega en quatre nivells articulats entre si: el primer relacionat amb la construcció d'un marc conceptual que reflexiona al voltant de les formes en què es pot pensar un conflicte armat prolongat en clau sonora; el segon, que proposa una lectura situada del conflicte armat colombià a partir de la bastida conceptual construïda; el tercer, en el qual es configura una tipologia d'estratègies de reparació acústica i des-ensordiment des de l'anàlisi de manifestacions de creació sonora en escenaris de conflicte, i el quart, que es troba vinculat a l'exploració d'una pràctica d'investigació-creació personal, basada en testimonis de víctimes del conflicte armat colombià i orientada al des-ensordiment i la reparació acústica. A través d'un diàleg entre formes de construcció de coneixement que busquen articular acustemologia, teoria fonamentada i recerca-creació, la tesi proposa una forma d'establir vincles entre la teoria i la pràctica artística. Així, a més de consolidar una bateria de conceptes per a llegir el conflicte armat colombià des d'una perspectiva sonora, amb aquesta investigació es busca: (1) identificar i sistematitzar repertoris i estratègies de creació sonora que sorgeixen com a respostes a escenaris de conflicte i (2) posar a prova aquestes eines mitjançant un mètode que s'esdevé en la pràctica artística personal. Així, per mitjà de la codificació de testimonis de víctimes del conflicte -extrets del Tomo Testimonial. Cuando los pájaros no cantaban. Historias de conflicto armado en Colombia, de la Comisión para el Esclarecimiento de la Verdad, la Convivencia y la No Repetición- en clau sonora, i la traducció en matrius generadores d'idees i processos de creació artística personal, aquesta investigació tanca amb una sèrie de processos exploratoris situats d'escolta, anàlisi i disseny de dispositius, sostinguts en criteris ètics que pretenen evitar la revictimització i l'espectacularització del patiment., Esta tesis ha sido realizada en el marco del Programa de Ayudas de Investigación y Desarrollo (PAID-01-20) de la Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Multiplexed vortex beam-based optical tweezers generated with spiral phase mask

  • Muñoz-Pérez, Francisco Misael
  • Furlan, Walter Daniel
  • Ferrando, Vicente|||0000-0002-7434-7109
  • Castro-Palacio, Juan Carlos|||0000-0002-0132-9989
  • Arias-Gonzalez, J. R.|||0000-0001-6802-0874
  • Monsoriu Serra, Juan Antonio|||0000-0003-3350-7951
[EN] The design and implementation of a multiplexed spiral phase mask in an experimental optical tweezers setup are presented. This diffractive optical element allows the generation of multiple concentric vortex beams with independent topological charges and without amplitude modulation. The generalization of the phase mask for multiple concentric vortices is also shown. The design for a phase mask of two multiplexed vortices with different topological charges is developed. We experimentally show the transfer of angular momentum to the optically trapped microparticles by enabling nearly independent orbiting dynamics around the optical axis within each vortex. The angular velocity of the confined particles versus the optical power in the focal region is also discussed for different combinations of topological charges., This work was supported by the Spanish Ministerio de Ciencia e Innovación (grant PID2019-107391RB-I00 and PID2022-142407NB-I00) and by Generalitat Valenciana (grant CIPROM/2022/30), Spain. F.M.M.P also acknowledgment the financial support from the Universitat Politècnica de València (PAID-01-20-25), Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

In-Network Quantum Computing for Future 6G Networks

  • Urgelles-Pérez, Helen
  • Monserrat del Río, Jose Francisco|||0000-0001-8664-6408
  • Maheshwari, Shivam
  • Nande, Swaraj Shekhar
  • Bassoli, Riccardo
  • Fitzek, Frank H.P.
[EN] In light of the imperative for expeditious data processing and enhanced global connectivity, the domain of communication technology is experiencing a rapid progression from the Fifth Generation (5G) to the forthcoming sixth generation (6G) within the research community. Furthermore, 6G promises to significantly augment the synergy between the human, digital, and physical realms, thereby necessitating the formulation of novel Key Performance Indicators (KPIs) as well as Key Values Indicators (KVIs), and the assimilation of commensurate technologies. Among these technologies, quantum computing is evolving rapidly due to its inherent advantages from quantum mechanics. Nevertheless, scant attention is directed toward a comprehensive exploration of the consequences attendant to its present-day application. The principal objective of this article resides in its endeavor to underscore, from a compensatory perspective, the convergence of 6G and quantum computing while concurrently considering the Sustainable Development Goals and its KVIs., The authors acknowledge the financial support by the Federal Ministry of Education and Research of Germany in the programme of "Souveran. Digital. Vernetzt.". Joint project 6G-life, project identification number: 16KISK001K. CeTI: Funded by the German Research Foundation (DFG, Deutsche Forschungsgemeinschaft) as part of Germany's Excellence Strategy -EXC 2050/1 -Project ID 390696704 -Cluster of Excellence "Centre for Tactile Internet with Human-in-the-Loop" (CeTI) of Technische Universitat Dresden. UPV: The research was founded by the Research and Development Grants Program (PAID-01-20) of the Universitat Politecnica de Valencia. The research stay of the author at Technische Universitat Dresden (Germany) was founded by the Program of Grants for student mobility of doctoral students at the Universitat Politecnica de Valencia in 2022 from Spain, and by Erasmus+ Student Mobility for Traineeship 2023. Open access funding enabled and organized by Projekt DEAL.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Modifying Kurchatov&apos, s method to find multiple roots

  • Cordero Barbero, Alicia|||0000-0002-7462-9173
  • Garrido-Saez, Neus|||0000-0002-7903-8591
  • Torregrosa Sánchez, Juan Ramón|||0000-0002-9893-0761
  • Triguero-Navarro, Paula|||0000-0002-7319-9992
Spanish Ministerio de Ciencia, Innovación y Universidades PGC2018-095896-B-C22, by the project ADMIREN of Universidad Internacional de La Rioja and was partially supported by Universitat Politècnica de València PAID-01-20-17 (UPV).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Memory in the iterative processes for nonlinear problems

  • Cordero Barbero, Alicia|||0000-0002-7462-9173
  • Garrido-Saez, Neus|||0000-0002-7903-8591
  • Torregrosa Sánchez, Juan Ramón|||0000-0002-9893-0761
  • Triguero-Navarro, Paula|||0000-0002-7319-9992
[EN] In this paper, we study different ways for introducing memory to a parametric family of optimal two-step iterative methods. We study the convergence and the stability, by means of real dynamics, of the methods obtained by introducing memory in order to compare them. We also perform several numerical experiments to see how the methods behave., This research was partially supported by Grant PGC2018-095896-B-C22 funded by MCIN/AEI/10.13039/5011000113033 by ERDF A way of making Europe,"European Union; this research was partially supported by PAID-01-20-17 (Universitat Politecnica de Valencia).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Characterization of Pelvic Floor Activity in Healthy Subjects and with Chronic Pelvic Pain: Diagnostic Potential of Surface Electromyography

  • Albaladejo-Belmonte, Mónica
  • Tarazona-Motes, Marta
  • Nohales-Alfonso, Francisco J.
  • De-Arriba, Maria
  • Alberola-Rubio, Jose
  • Garcia-Casado, Javier|||0000-0003-1410-2721
[EN] Chronic pelvic pain (CPP) is a highly disabling disorder in women usually associated with hypertonic dysfunction of the pelvic floor musculature (PFM). The literature on the subject is not conclusive about the diagnostic potential of surface electromyography (sEMG), which could be due to poor signal characterization. In this study, we characterized the PFM activity of three groups of 24 subjects each: CPP patients with deep dyspareunia associated with a myofascial syndrome (CPP group), healthy women over 35 and/or parous (>35/P group, i.e., CPP counterparts) and under 35 and nulliparous (<35&NP). sEMG signals of the right and left PFM were recorded during contractions and relaxations. The signals were characterized by their root mean square (RMS), median frequency (MDF), Dimitrov index (DI), sample entropy (SampEn), and cross-correlation (CC). The PFM activity showed a higher power (>RMS), a predominance of low-frequency components (DI), greater complexity (>SampEn) and lower synchronization on the same side (35/P group. The same trend in differences was found between healthy women (35/P) associated with aging and parity. These results show that sEMG can reveal alterations in PFM electrophysiology and provide clinicians with objective information for CPP diagnosis., This study was funded by Universitat Politecnica de Valencia in Programa de Ayudas de Investigacion y Desarrollo (PAID-01-20), ISCIII, MCIU, VLC Campus in Convocatoria Ayudas: UPV-La Fe (INBIO): 2016 SPEHG (ID:C18), 2019 sEMG_BONTAv (ID:C06) and funds from private contracts with Merz Pharmaceuticals GmbH S.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Analysis of the Evolution of Sea Water Quality in the Spanish Coast from Satellite Images before and during a Confinement Period

  • Parra-Boronat, Mar
  • Parra, Lorena
  • Jimenez, Jose M.|||0000-0002-3688-7235
  • Lloret, Jaime|||0000-0002-0862-0533
[EN] Satellite imaging, a form of remote sensing, can be used to analyse water quality, which must be monitored for proper and sustainable environmental management. This paper studies the effect of a sea traffic reduction in the Alboran Sea (Spain), analysing the changes in water quality before (from February 3rd, 2020) and during (until June 22nd, 2020) a confinement period. This was an unprecedented event in modern times and brought an interesting opportunity to study dynamics when the human impact is reduced. The study of these dynamics and the concentration levels with little human effect is important for environmental conservation purposes. We applied already existing indices using ArcGIS and ACOLITE to determine the following environmental parameters: colored dissolved organic matter (CDOM), suspended particulate matter (SPM), chlorophyll-a (Chl-a), and harmful algal blooms (HABs). Prequarantine concentration levels can reach up to 4 a(CDOM)440 (CDOM), 18 g/m(3) (SPM), and 100 mu g/L (Chl-a). Most prequarantine days presented an increment in either concentration level or distribution from the day before. The effects a sudden human impact has on an ecosystem which experimented reduced human influence for months were shown. On the day before the said impact (June 12th), three of the parameters were barely detected with concentration levels of mostly 2 a(CDOM)440 (CDOM), 6 g/m(3) (SPM), and 25 mu g/L (Chl-a), and sparse distribution. Afterwards (June 22nd), their levels went up to 4 a(CDOM)440 (CDOM), 14 g/m(3) (SPM), and 1000 mu g/L (Chl-a) and were distributed near the ports. The results presented in this study show that the main drivers of change when human impact was reduced were climatologic events (such as storms). Nevertheless, the importance of the human facto can be seen through the CDOM, SPM, and Chl-a plume near port areas observed the day after port activity was reactivated, June 22nd., This research was funded by the European Union through the ERANETMED (Euromediterranean Cooperation through ERANET joint activities and beyond) project ERANETMED3-227 SMARTWATIR; by Conselleria de Educacion, Cultura y Deporte with the Subvenciones para la contratacion de personal investigador en fase postdoctoral, grant number APOSTD/2019/04; and by Universitat Politecnica de Valencia through Program PAID-01-20 and PAID-10-20.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A quantitative autonomous bioluminescence reporter system with a wide dynamic range for Plant Synthetic Biology

  • Calvache-Román, Camilo Alberto
  • Vázquez-Vilar, Marta
  • Moreno-Giménez, Elena
  • Orzáez Calatayud, Diego Vicente
[EN] Plant Synthetic Biology aims to enhance the capacities of plants by designing and integrating synthetic gene circuits (SGCs). Quantitative reporting solutions that can produce quick, rich datasets affordably are necessary for SGC optimization. In this paper, we present a new, low-cost, and high-throughput reporter system for the quantitative measurement of gene expression in plants based on autonomous bioluminescence. This method eliminates the need for an exogenous supply of luciferase substrate by exploiting the entire Neonothopanus nambi fungal bioluminescence cyclic pathway to build a self-sustained reporter. The HispS gene, the pathway's limiting step, was set up as the reporter's transcriptional entry point as part of the new system's design, which significantly improved the output's dynamic range and brought it on par with that of the gold standard FLuc/RLuc reporter. Additionally, transient ratiometric measurements in N. benthamiana were made possible by the addition of an enhanced GFP as a normalizer. The performance of new NeoLuc/eGFP system was extensively validated with SGCs previously described, including phytohormone and optogenetic sensors. Furthermore, we employed NeoLuc/eGFP in the optimization of challenging SGCs, including new configurations for an agrochemical (copper) switch, a new blue optogenetic sensor, and a dual copper/red-light switch for tight regulation of metabolic pathways., The authors would like to thank Matias Zurbriggen for sharing the plasmids of the red-light system and Jorge Lozano-Juste for sharing the plasmid with the MAPKKK18 promoter. The authors also would like to thank Alberto Conejero for his assistance with data analysis.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Enhanced monitoring and dynamics analysis of a concentrated solar thermal experimental plant for steam production

  • David-Hernandez, Marco Antonio
  • Cazorla-Marín, Antonio|||0000-0003-3314-0395
  • Gonzálvez-Maciá, José|||0000-0001-9422-7756
  • Payá-Herrero, Jorge|||0000-0003-2663-3191
  • Frasquet, Miguel
[EN] Solar heat for industrial processes (SHIP) is an increasingly interest option as a key strategy to decarbonise the industrial sector. Linear Fresnel Collectors are a promising technology due to their cost-effectiveness and efficiency. As part of the SOLPINVAP project, an experimental facility was constructed to prove the use of modular Linear Fresnel collectors for steam production in industrial processes. SHIP plants commonly use standard industrial sensors, which can result in high uncertainty when measuring absorbed and produced heat. This can be problematic when selling energy to customers through an energy purchase agreement. To address this issue, an uncertainty analysis was conducted in the experimental plant, and more precise instrumentation was added to the installation. This reduced the uncertainty in the absorbed energy in the solar field from 12% to 3% and obtaining an uncertainty of 3% in the generated energy. Additionally, the operation of the plant was studied through experimental tests conducted during the summer of 2022, and the system dynamics were analysed during the period of peak heat absorption., The authors gratefully acknowledge the company Solatom CSP, for the information and operational data from the SHIP facility, and for the technical support, specially to Juan Martinez and Carlo Terruzzi. This work was partially supported by the Research and Development Aid Program (PAID-01-20) of the Universitat Politecnica de Valencia for receiving the Research Fellowship FPI-UPV-2020. This publication hasbeen carried out in the framework of the project "DECARBONIZACION DE EDIFICIOS E INDUSTRIAS CON SISTEMAS HIBRIDOS DE BOMBA DE CALOR", founded by the Spanish "Ministerio de Ciencia e Innovacion (MICIN) " with code number PID2020-115665RB-I00. The project was also partially funded by the R&D project SolarSteam4IND (TED2021-130614A-I00) , funded by MICIN/AEI/10.13039/501100011033/and by the European Union NextGeneration EU/PRTR 2021 call.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Design, establishment, analysis, and quality control of a high-precision reference frame in Cortes de Pallás (Spain)

  • García-Asenjo Villamayor, Luis|||0000-0001-6535-2216
  • Baselga Moreno, Sergio|||0000-0002-0492-4003
  • Martínez, Laura
  • Garrigues, Pascual
  • Luján, Raquel
[EN] A high-precision geodetic reference frame was required in Cortes de Pallas (Spain) to undertake a long-term deformation monitoring project. Involving distances up to 2000 m, the aimed accuracy was 1 mm and 3 mm for horizontal and vertical components, respectively. Such a high precision is necessary to detect possible displacements of selected points on a critical rocky area in a short period of time, i.e., 2 or 3 years, and also to provide ground control for the integration of precise 3D models periodically obtained by remote sensing techniques. Considering the historical geotechnical problems of the area, the possible influence of the hydroelectric power plant, and the peculiar orography of the zone, a proper analysis of the stability is crucial if the reference frame is to be used for rigorous over-time deformation monitoring. This paper describes the deformation monitoring of a 10-pillar geodetic network which was measured from 2018 to 2020 by using a sub-millimetric Mekometer ME5000 (0.2 mm + 0.2 ppm) along with a demanding observing methodology which includes a network of data loggers for temperature, humidity, and air pressure as well as proper calibration of sensors and instruments to prevent potential inconsistencies between the scale of the network and the unit of length of the International System (SI meter). The results demonstrated that the chosen methodology yielded the aimed accuracy. However, using such a high precision methodology entails the problem that small displacements of only 1 or 2 mm are significantly detected as deformations by conventional deformation analysis and then it arises the problem of finding a subset of stable points for a rigorous datum realization when all the points seem to displace. This general problem is analyzed in the particular case of Cortes de Pallas, where a balanced mix of deformation analysis and technical decisions was eventually adopted to define a precise and stable reference frame for rigorous over-time deformation monitoring., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Symmetry in the Multidimensional Dynamical Analysis of Iterative Methods with Memory

  • Cordero Barbero, Alicia|||0000-0002-7462-9173
  • Garrido-Saez, Neus|||0000-0002-7903-8591
  • Torregrosa Sánchez, Juan Ramón|||0000-0002-9893-0761
  • Triguero-Navarro, Paula|||0000-0002-7319-9992
[EN] In this paper, new tools for the dynamical analysis of iterative schemes with memory for solving nonlinear systems of equations are proposed. These tools are in concordance with those of the scalar case and provide interesting results about the symmetry and wideness of the basins of attraction on different iterative procedures with memory existing in the literature., This research was partially supported by Grant PGC2018-095896-B-C22, funded by MCIN/ AEI/10.13039/5011000113033 by ERDF A way of making Europe, European Union; by the internal research project ADMIREN of Universidad Internacional de La Rioja (UNIR); and partially supported by Universitat Politècnica de València Contrato Predoctoral PAID-01-20-17 (UPV).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Additive-Free Commercial Alumina Catalyzes the Halogen Exchange Reaction of Long Alkyl Halides in Batch and in Flow Processes

  • Mingueza-Verdejo, Paloma
  • Hervàs-Arnandis, Susi
  • Oliver-Meseguer, Judit|||0000-0003-1555-3583
  • Leyva Perez, Antonio|||0000-0003-1063-5811
[EN] The synthesis of alkyl halides can be performed by simply halide exchange reactions between two different alkyl halides, catalyzed by aluminosilicates. Here, we show that commercially available alumina shows a superior catalytic activity for the halogen exchange reaction between long alkyl halides (more than 6 carbons), including fluorides, in either batch or flow modes. The catalytic activity of the solid alumina is modulated by alkaline countercations on the surface, and sodium-supported alumina shows the optimal performance for the iodo-bromo and iodo-fluoro exchange under inflow reaction conditions, after >24 h reaction time, without any external additive., P. M.-V. and S. H.-A. thank ITQ, UPV-CSIC for the concession of a contract (PAID 01-20 and FPI-2022-S2-42040, respectively). J. O.-M. thanks the MICINN for the concession of a Ramon y Cajal contract (RYC2022-036154-I).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Can southern Europe lead an urban energy transition? Insights from the Energy Transition Roundtable in Valencia, Spain

  • Escario-Chust, Ana|||0000-0002-8094-9894
  • Peris-Blanes, Jordi|||0000-0002-4818-8626
  • Palau-Salvador, Guillermo|||0000-0003-0492-6567
  • Vogelzang, Fenna
  • Segura-Calero, Sergio
[EN] Multi-stakeholder engagement spaces are important instruments for transition governance. Due to their nature they require acute consciousness of the local context and place they are based in. The research presented in this paper adds to the body of literature on how to govern the energy transition at a local level, and contributes to filling the gap on the role of multi-stakeholder engagement groups in the energy transition process within a southern European context. Empirical evidence is drawn from the city of Valencia, Spain, where innovative formulas are being developed. One such innovation, the Mesa de Transici ¿on Energ ¿etica (MTE ¿ Energy Round Table), emerges as a multi-stakeholder, participatory and inclusive mechanism to define the roadmap towards achieving the energy transition and urban sustainability. This new experience in the city led to the discovery and exploration of the challenges, barriers, benefits and opportunities the city had to face, as well as clarifying how such multi-stakeholder engagement spaces can facilitate the energy transition path. The research evidenced that while participants and organizers were very satisfied with the development of the stakeholder group and the resulting demonstration projects used to enhance experimentation in the city, they signaled various difficulties. Such difficulties were rooted in the context and included dealing with an uneven vision of the transition, the vulnerability of the group due to the predominant role of the local administration, and a perceived lack of action. Nevertheless, the multi-stakeholder engagement space for the energy transition in Valencia can be seen as an important driver of change for the city. It can also be seen as an experimental model to be replicated in other Spanish or southern European cities., This work has received funding from the Research and Development Aid Program (PAID-01-20) from the Universitat Politecnica de Valencia; the Generalitat Valenciana and the European Social Fund through the postdoctoral grant CIAPOS/2021/178; and for open access from CRUE-Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Diseño y uso de redes neuronales para estimar las prestaciones en solitario de las aplicaciones

  • Lurbe, Manel
  • Feliu-Pérez, Josué|||0000-0003-3017-4266
  • Petit Martí, Salvador Vicente|||0000-0003-2426-4134
  • Gómez Requena, María Engracia|||0000-0003-1466-4118
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
[ES] Cuando varias aplicaciones se ejecutan concurrentemente en un computador con recursos compartidos, como las caches de último nivel o la memoria principal, se producen pérdidas de prestaciones por la interferencia entre aplicaciones en el uso de estos recursos respecto a su ejecución en solitario. Para reducir estas pérdidas, se han diseñado políticas para gestionar estos recursos (por ej., políticas de reparticionando del espacio de cache o de configuración de la prebúsqueda hardware). Un importante desafío en diferentes ámbitos, como la nube o los sistemas de tiempo real, es predecir cómo la acción de una determinada política afectaría a las prestaciones de cada aplicaciones antes de realizarla. Este trabajo presenta una propuesta basada en redes neuronales que, a partir de datos obtenidos por una aplicación en ejecución concurrente con otras aplicaciones, estima las prestaciones que tendría una aplicación en solitario. Los resultados experimentales muestran que la propuesta se adapta dinámicamente a los cambios en el comportamiento de las aplicaciones de la carga. Las prestaciones estimadas presentan, de media, un error del 11,7% y del 2,3% para las métricas MAPE y MSE, respectivamente., Trabajo financiado por el Ministerio de Ciencia, Innovaciçon y Universidades y ERDF bajo la ayuda RTI2018-098156-B-C51, por la GVA AICO/2021/266, por la UPV PAID-01-20. Josué Feliu con apoyo de un contrato de formación Juan de la Cierva (FJC2018-036021-I)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Experimental evidence of the Poisson-like effect for flexural waves in thin metallic plates

  • Sánchez-Dehesa Moreno-Cid, José|||0000-0003-0742-4407
  • Cervera Moreno, Francisco Salvador
  • Broatch, A.|||0000-0001-9991-1039
  • García-Tíscar, Jorge|||0000-0003-4934-4587
  • Gao, Penglin
  • Felgueroso-Rodríguez, Andrés
[EN] This Letter reports the feasibility of a structure specifically designed for the control of flexural waves propagating in thin perforated plates. The structure, here denominated as a redirector device, consists of a square array of free holes that splits the impinging beam and transmits sideways their vibrational energy. This behavior is known as a Poisson-like effect, and it was theoretically described in different acoustic structures. This effect is experimentally demonstrated for flexural waves excited in an aluminum perforated plate, and it is explained in terms of a physical mechanism different to that reported for acoustic waves interacting with thin hollow cylinders embedded in water. In addition, a collimator device based also in free holes is designed and validated with the purpose of providing the beam impinging the redirector device. The measurements indicate that the amount of redirected energy is strongly enhanced when a barrier of two-beam resonators is added at the rear side of the redirector. All the designs are validated by an experimental setup employing 1¿mm thick aluminum plates., This research was partially supported by Grant No. PID2020112759GB-I00 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe." J.S.-D. acknowledges the "Proyecto interno" supported by the Universitat Politècnica de Valencia. A.F. is supported through the Programa de Apoyo para la Investigación y Desarrollo of the Universitat Politècnica de València under Grant Nos. PAID-01-20 and 21589. J.S.-D. and P.G. acknowledge useful conversations with Johan Christensen.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Establishing the EURO5000 reference baseline

  • Wisniewski, Mariusz
  • Lubowicki, Tomasz
  • Wezka, Kinga
  • Szpunar, Ryszard
  • Prochniewicz, Dominik
  • Guillory, Joffray
  • Truong, Daniel
  • Wallerand, Jean-Pierre
  • Garrigues Talens, Pascual
  • Luján, Raquel
  • Baselga Moreno, Sergio|||0000-0002-0492-4003
  • García-Asenjo Villamayor, Luis|||0000-0001-6535-2216
[EN] The EURO5000 geodetic reference baseline, a 5 km precise measurement facility, has been established and validated in the existing Geodynamic Test Field at the Pieniny Klippen Belt in Poland, a site chosen for its confirmed geodynamic stability. Over three years, the Warsaw University of Technology (WUT) determined initial baseline lengths through repeated GNSS and EDM measurement campaigns, establishing a detailed uncertainty budget. The stability of the newly installed points was rigorously monitored, contributing to the overall reliability assessment. Calibrated distances were independently verified by two advanced methods. The determined reference distances were independently confirmed by the Universitat Polite`cnica de Vale`ncia (UPV) using precise GBDM + GNSS methodology and by the Conservatoire National des Arts et Metiers (CNAM) with innovative two-color optical Arpent telemetry measurement ADM system, which effectively mitigates atmospheric refractive index challenges. In all cases, results from these independent methods showed strong consistency with the derived reference values within their declared accuracy ranges. The established EURO5000 baseline now serves as a robust European reference for precise distance measurements up to 5 km, demonstrating a remarkable measurement uncertainty below 1 mm (k = 2). This newly established reference standard offers a valuable resource for calibrating long-distance geodetic instruments, providing a highly accurate benchmark., The project 18SIB01 GeoMetre has received funding from the EMPIR programme co-financed by the Participating States and from the European Union's Horizon 2020 research and innovation programme, funder ID: 10.13039/100014132.The work was created by Mariusz Wisniewski as a result of the implementation of the "Implementation Doctorate" program financed by the Ministry of Education and Science. We would like to thank Dr. Eng. S&#322;awomir Jastrz&#281;bski for organizing and piloting the drone for the purposes of this research. Raquel Lujan acknowledges the funding from the Programa de Ayudas de Investigacion y Desarrollo (PAID-01-20) de la Universitat Polit`ecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Welfare implications on management strategies for rearing dairy calves: A systematic review. Part 2 Social management

  • Carulla-Pascual, Patricia
  • Villagrá, Arantxa
  • Blanco-Penedo, Isabel
  • Estellés, F.|||0000-0001-6774-6075
[EN] Introduction: Raising a healthy calf up to puberty is essential for optimal farm performance. It is therefore, it is necessary to promote animal welfare from the three spheres during this short period. Social management has been postulated as essential in lowering stress and consequently improving calf welfare during this period. Only the health sphere has been studied for a long time, but more recent studies have recently promoted positive experiences and emotional states from affective states or cognitive judgment and natural living spheres. A systematic review of different management strategies in rearing dairy calves according to the three spheres of animal welfare has been conducted using an electronic search strategy. Methods: The analysis and extraction of information from the studies were performed according to a protocol. From 1,783 publications screened, only 351 met the inclusion criteria. Results: The publications identified in the search can be divided into two main groups, feeding and social management, based on the main topic of the publication. This review provides an overview of social management, understood as the calf's interaction with others around it. Discussion: Primary social management issues that emerged were social housing with congeners, separation from the mother and human-animal interaction, distributed in the three broad spheres of animal welfare. The review highlights unresolved questions about how social management practices affect the three spheres of animal welfare at this life stage and the need to standardize good socialization practices for this stage. In conclusion, all the information shows that social housing has improved animal welfare from affective states, cognitive judgment, and natural living spheres. However, gaps in research were identified in relation to the optimal time to separate the calf from the mother, the optimal time to group with conspecifics after birth and group size. Further research on positive welfare through socialization are needed., This research was supported by the Centro para el Desarrollo Tecnológico Industrial and Cowvet S.L through project CDTI-IDI20200936. In addition, PC held a grant from the Ph.D. student s research program of the Universitat Politècnica de València (PAID-01-20)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

An automatized methodology to generate velocity distortion panels for wind tunnel testing

  • Broatch, A.|||0000-0001-9991-1039
  • Margot , Xandra|||0000-0002-2639-0444
  • García-Tíscar, Jorge|||0000-0003-4934-4587
  • Felgueroso-Rodríguez, Andrés
[EN] Replicating the actual velocity distribution that a target will experience in real life is sometimes necessary to perform realistic aerodynamic characterizations in wind tunnels. In industrial aerodynamics, this is especially critical in aeroengine inlets, automotive and aircraft compressors, atmospheric boundary layers, etc. However, wind tunnels are designed to provide a flow as uniform as possible. To reproduce the desired velocity distribution, the utilization of certain devices for flow adaption is typically required, in a trial-and-error procedure. In this research, we propose a methodology to automatically generate distortion screens to reproduce a desired target velocity distribution, based on analytical relations between the porosity in a media and the total pressure loss induced by this porosity. A numerical routine is used to design a robust and easily -manufactured hexahedral grid that matches the required porosity distribution. Once this geometry is generated, it can be realized by means of widely-available, inexpensive additive manufacturing. To validate the proposed methodology, two geometries that reproduce 1D velocity distributions and another geometry which considers a bi-dimensional distribution have been generated and studied using both computational fluid dynamics and wind tunnel measurements, demonstrating good agreement between the target velocity distributions and those obtained numerically and experimentally., A. Felgueroso is supported through the Programa de Apoyo para la Investigación. Desarrollo of the Universitat Politècnica de Valencia under grant PAID-01-20 nº 21589.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Modelling of a linear Fresnel solar thermal collector system for industrial processes and validation with on-site operational measurements

  • David-Hernandez, Marco Antonio
  • Cazorla-Marín, Antonio|||0000-0003-3314-0395
  • Gonzálvez-Maciá, José|||0000-0001-9422-7756
  • Payá-Herrero, Jorge|||0000-0003-2663-3191
[EN] The industry sector consumes one-third of the world's energy demand, where 70 % is used for heat-intensive processes. To meet this heat demand, fossil fuel-based technologies are typically employed, resulting in high carbon emissions. To decarbonise the industry sector, concentrating solar thermal technologies such as Fresnel collectors have been studied to demonstrate their techno-economic viability. This paper presents a new modular quasi-dynamic model that has been validated using measurements from two experimental campaigns conducted in an existing solar field facility. The model predicts the system's dynamic behaviour accurately, including the pressure evolution inside the tank with an error below 0.1 bar and the solar field temperatures with an error of around 0.5 K. Additionally, the difference between the daily measured and simulated generated energy is below 4.5 % on the analysed days. The model was also used to simulate the annual performance, resulting in a specific energy generation of 1604.5 MJ/m2 and a thermal efficiency of 27.8 %. Furthermore, a techno-economic analysis is conducted, incorporating a 20-year system lifetime, which yielded a payback period of 10 years and potential savings in CO2 emissions of 17.8 tCO2 per year., The company SOLATOM is acknowledged for all the information data of the SHIP plant. This work was partially supported by the Research and Development Aid Program (PAID-01-20) of the Universitat Politecnica de Valencia for receiving the Research Fellowship FPI-UPV.2020. This publication has been carried out in the framework of the project "DECARBONIZACION DE EDIFICIOS E INDUSTRIAS CON SISTEMAS HIBRIDOS DE BOMBA DE CALOR", founded by the Spanish "Ministerio de Ciencia e Innovacion (MICIN)" with code number PID2020-115665RB-I00. The project was also partially founded by the R & D project SolarSteam4IND (TED2021-130614A-I00), funded by MICIN/AEI/10.13039/501100011033 and by the European Union NextGeneration EU/PRTR 2021 call. Funding for open access charge: CRUE-Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Improving the order of a fifth-order family of vectorial fixed point schemes by introducing memory

  • Cordero Barbero, Alicia|||0000-0002-7462-9173
  • Garrido-Saez, Neus|||0000-0002-7903-8591
  • Torregrosa Sánchez, Juan Ramón|||0000-0002-9893-0761
  • Triguero-Navarro, Paula|||0000-0002-7319-9992
[EN] In this paper, we present a family of iterative schemes for solving nonlinear systems with 3 real parameters. If we do not fix values for the parameters this family has order 2, but if we fix two of them we obtain order 5. Starting from the fifth-order family, we study different ways of introducing memory, thus obtaining 6 order methods. We also analyze the efficiency indices of the family and of the methods with memory obtained from it, and we compare them with each other, as well as compare them with other known classes of iterative methods with order 5 and 6. Several numerical experiments are carried out to see the behaviour of the discussed methods, including dynamical planes to compare the stability of the different iterative schemes., This research was partially supported by Spanish Ministerio de Ciencia, Innovacia y Universidades PGC2018-095896-B-C22, by the internal research project ADMIREN of Universidad Internacional de La Rioja (UNIR) and was partially supported by Universitat Politecnica de Valencia Contrato Predoctoral PAID -01-20-17 (UPV) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis doctoral (DoctoralThesis)

Evaluation by Detailed CFD Modelling of the Effect of Renewable Fuels on the Flame Structure under Compression Ignition Engine Conditions

  • de León Ceriani, Daiana
[ES] El alto impacto del sector transporte respecto a las emisiones globales de CO2 y su efecto en el cambio climático ha llevado a que éste transite hacia tecnologías más eficientes y medioambientalmente sostenibles. Sin embargo, el ritmo de transformación es lento en relación a lo que se necesita para frenar el calentamiento global existente. En este sentido, en los últimos tiempos los caminos hacia la transformación se han diversificado; el concepto de "defossilization" ha surgido como alternativa a la descarbonización, ya que destaca la posibilidad de incluir una mayor cantidad de combustibles sintéticos y renovables, con los cuales se pueden obtener resultados igualmente efectivos. Dentro de estos, destacan los combustibles Polioximetileno dimetil éter (OMEn), su carácter oxigenado y no poseer enlaces carbono-carbono, los hace prometedores respecto a la formación de hollín. Además, presentan grandes similitudes y compatibilidades con el diésel convencional, lo cual posibilita el uso de la flota de vehículos con motores de combustión interna existente a nivel mundial, acelerando así la transición y siendo una alternativa con alcance global. La presente tesis tiene como objetivo llevar a cabo un estudio fundamental sobre el proceso de combustión y la estructura de la llama de chorros tipo Diésel cuando se utilizan combustibles tipo OMEn. Para la consecución de dicho objetivo, la metodología planteada es eminentemente computacional, encontrando aquí las mayores brechas en la literatura. Se lleva a cabo un estudio de la cinética química y el efecto de la difusión en los combustibles estudiados mediante configuraciones canónicas, como reactores homogéneos y flamelets de contraflujo. Posteriormente, se estudia detalladamente el proceso de combustión y la estructura de la llama mediante el uso extensivo de Dinámica de fluidos computacional (CFD, en inglés), con modelos de turbulencia RANS y LES, en conjunto con un modelo de combustión avanzado basado en el concepto de flamelets, denominado UFPV. Todos los casos estudiados están definidos siguiendo las directrices de la Engine Combustion Network (ECN), los cuales representan chorros inyectados en ambientes quiescentes con toberas monoorificio. Particularmente, se evalúan los Sprays A y D, y el impacto de variar la temperatura ambiente. Como conclusión general, se puede afirmar que estos modelos CFD predicen correctamente el desarrollo de la combustión bajo las condiciones analizadas, y que estos combustibles son capaces de desarrollar diferentes estructuras de llama altamente dependientes de las condiciones de contorno impuestas., [CA] L'alt impacte del sector del transport respecte a les emissions globals de CO2 i el seu efecte en el canvi climàtic ha portat a que aquest transite cap a tecnologies més eficients i mediambientalment sostenibles. No obstant això, el ritme de transformació és lent en relació amb el que es necessita per frenar l'escalfament global existent. En aquest sentit, en els últims temps els camins cap a la transformació s'han diversificat; el concepte de "defossilització" ha sorgit com a alternativa a la descarbonització, ja que destaca la possibilitat d'incloure una major quantitat de combustibles sintètics i renovables, amb els quals es poden obtenir resultats igualment efectius. Dins d'aquests, destaquen els combustibles tipus polioximetilen dimetil èters (OMEn), el seu caràcter oxigenat i al no posseir enllaços carbó-carbó, els fa prometedors respecte a la formació de sutge. A més, presenten grans semblances i compatibilitats amb el dièsel convencional, la qual cosa possibilita l'ús de la flota de vehicles amb motors de combustió interna existent a nivell mundial, accelerant així la transició i essent una alternativa amb abast global. La present tesi té com a objectiu dur a terme un estudi basic sobre el procés de combustió i l'estructura de la flama de dolls tipus Dièsel quan s'utilitzen combustibles tipus OMEn. Per a la consecució d'aquest objectiu, la metodologia plantejada és eminentment computacional, trobant ací les majors mancances en la literatura. Es realitza un estudi de la cinètica química i l'efecte de la difusió en els combustibles estudiats mitjançant configuracions canòniques, com ara reactors homogenis i flamelets de contraflux. Posteriorment, s'estudia detalladament el procés de combustió i l'estructura de la flama mitjançant l'ús extensiu de dinàmica de fluids computacional (CFD, en anglés), amb models de turbulència RANS i LES, conjuntament amb un model de combustió avançat basat en el concepte de flamelets, anomenat UFPV. Tots els casos estudiats estan definits seguint les directrius de l'Engine Combustion Network (ECN, en anglés), els quals representen dolls injectats en ambients quiescents amb toveres mono-orifici. Particularment, s'avaluen els Sprays A i D, i l'impacte de variar la temperatura ambient. Com a conclusió general, es pot afirmar que aquests models CFD prediuen correctament el desenvolupament de la combustió sota les condicions analitzades, i que aquests combustibles són capaços de desenvolupar diferents estructures de flama altament dependents de les condicions de contorn imposades., [EN] The significant impact of the transportation sector on global CO2 emissions and its effect on climate change has led to a shift towards more efficient and environmentally sustainable technologies. However, the pace of this transformation is slow relative to what is needed to mitigate existing global warming. In this regard, pathways toward transformation have diversified recently, with the concept of defossilization emerging as an alternative to decarbonization. Defossilization emphasizes the possibility of incorporating a greater variety of synthetic and renewable fuels, which can yield equally effective results. Among these alternatives, Polyoxymethylene dimethyl ether ($OMEn$) fuels stand out due to their oxygenated character and absence of carbon-carbon bonds, making them promising in reducing soot formation. Furthermore, their similarities and compatibilities with conventional diesel enable the utilization of the existing global fleet of internal combustion engine vehicles, thus potentially accelerating the transition on a global scale. This thesis aims to conduct a fundamental study on the combustion process and flame structure of Diesel-like sprays when OMEn-type fuels are utilized. To achieve this objective, the proposed methodology is eminently computational, addressing significant gaps in the existing literature. A study of chemical kinetics and diffusion effects in the fuels under investigation uses canonical configurations such as homogeneous reactors and counterflow flamelets. Subsequently, the combustion process and flame structure are examined in detail through extensive Computational fluid dynamics (CFD) simulations, employing RANS and LES turbulence models in conjunction with an advanced combustion model based on the flamelet concept, UFPV. All studied cases are defined according to the Engine Combustion Network (ECN) guidelines, representing sprays injected into quiescent environments with single-hole nozzles. Specifically, Spray A and D are evaluated, along with the impact of varying ambient temperatures. In conclusion, it can be affirmed that the CFD models accurately predict combustion development under the analysed conditions, and these fuels can develop different flame structures highly dependent on the imposed boundary conditions., The respondent wishes to acknowledge the financial support received through a grant from Vicerrectorado de Investigación of Universitat Politècnica de València with reference FPI UPV SUBP2 (PAID-01-20)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Design and Calibration of Moisture Sensor Based on Electromagnetic Field Measurement for Irrigation Monitoring

  • Basterrechea-Chertudi, Daniel Andoni
  • Parra-Boronat, Mar
  • Parra-Boronat, Lorena
  • Marín, José F.
  • Mauri, Pedro V.
  • Rocher, Javier|||0000-0003-0182-1671
  • Lloret, Jaime|||0000-0002-0862-0533
[EN] Soil moisture control is crucial to assess irrigation efficiency in green areas and agriculture. In this paper, we propose the design and calibration of a sensor based on inductive coils and electromagnetic fields. The proposed prototypes should meet a series of requirements such as low power consumption, low relative error, and a high voltage difference between the minimum and maximum moisture. We tested different prototypes based on two copper coils divided into two different sets (P1-P15 and NP1-NP4). The prototypes have different characteristics: variations in the number and distribution of spires, existence or absence of casing, and copper wires with a diameter of 0.4 or 0.6 mm. In the first set of experiments carried out in commercial soil, the results showed that the best prototypes were P5, P8, and P9. These prototypes were used in different types of soils, and P8 was selected for the subsequent tests. We carried the second set of experiments using soil from an agricultural field. Based on the data gathered, mathematical models for the calibration of prototypes were obtained and verified. In some cases, two equations were used for different moisture intervals in a single prototype. According to the verification results, NP2 is the best prototype for monitoring the moisture in agricultural lands. It presented a difference in induced voltage of 1.8 V, at 500 kHz, between wet and dry soil with a maximum voltage of 5.12 V. The verification of the calibration determined that the calibration using two mathematical models offers better results, with an average absolute error of 2.1% of moisture., This work is funded by the European Union under ERANETMED (Euro-Mediterranean Cooperation through ERANET joint activities and beyond), project ERANETMED3-227 SMARTWATIR and the European Union, MAPA and Comunidad de Madrid (through IMIDRA), under the project PDR18-XEROCESPED of the PDR-CM 2014-2020 (operative programme of the European Agriculture Fund for Rural Development, EAFRD). L.P. is funded by Conselleria de Educacion, Cultura y Deporte, programme Subvenciones para la contratacion de personal investigador en fase postdoctoral, grant APOSTD/2019/04; J.R. by the Ministerio de Educacion, Cultura y Deporte, through the "Ayudas para contratacion pre-doctoral de Formacion del Profesorado Universitario FPU (Convocatoria 2016)" grant number FPU16/05540; and M.P. by the Universitat Politecnica de Valencia through the pre-doctoral PAID-01-20 programme.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis doctoral (DoctoralThesis)

Design of New Synthetic Genetic Tools for Plant Biotechnology

  • Calvache Román, Camilo Alberto
[ES] La Biología Sintética aplica principios de ingeniería, como la modularidad y la estandarización, a los sistemas biológicos, y su extensión a las plantas está permitiendo nuevos enfoques para la mejora de cultivos. A medida que avanza la Biología Sintética Vegetal, existe una necesidad creciente de módulos reguladores fiables y predecibles, así como de sistemas de medida capaces de respaldar el diseño racional de circuitos genéticos cada vez más complejos. El objetivo general de esta Tesis fue desarrollar, adaptar y evaluar interruptores regulatorios y reporteros autónomos adecuados para sistemas vegetales, con el fin de mejorar el control postraduccional, la caracterización cuantitativa y la monitorización biológica en tiempo real. El trabajo presentado en el Capítulo 1 se centra en la regulación postraduccional mediante proteínas anti-CRISPR (Acrs). Dos inhibidores de origen fágico, AcrIIA4 y AcrVA1, fueron adaptados para su expresión en plantas y caracterizados como represores de los sistemas CRISPR/Cas9 y Cas12a. Su capacidad para suprimir la edición génica y la activación transcripcional se evaluó en Nicotiana benthamiana, y su uso como componentes reguladores modulables se exploró mediante experimentos de dosis y combinando AcrIIA4 con un degrón inducible por auxina. Estos resultados demostraron que los Acrs pueden funcionar como represores compactos y de acción rápida para circuitos basados en CRISPR, al tiempo que revelaron limitaciones relacionadas con la reversibilidad y la ocupación del ADN diana. El Capítulo 2 aborda la necesidad de reporteros cuantitativos y libres de sustrato para la prototipación de circuitos. Con este fin, la Ruta de Bioluminiscencia Fúngica (FBP) de Neonothopanus nambi fue rediseñada para crear un sistema luminiscente autónomo adecuado para ensayos en plantas. Al reorganizar la estequiometría de la ruta y seleccionar a la Hispidina Sintasa (HISPS) como punto de entrada transcripcional, se desarrolló un reportero lineal y estable -NeoLuc/eGFP- que fue posteriormente validado. Su rendimiento se evaluó en una amplia gama de circuitos sintéticos, incluidos promotores sensibles a fitohormonas, módulos optogenéticos y un interruptor inducible por cobre, estableciendo su utilidad para la caracterización de mediana escala en discos foliares. Sobre la base de estas herramientas, el Capítulo 3 explora el diseño de un biosensor basado en BRET para la detección de virus vegetales. Combinando la luciferasa LUZ con proteínas fluorescentes e insertando sitios de corte de proteasas de potyvirus en los enlazadores interdominio, se crearon constructos capaces de cambiar el color de la luminiscencia en respuesta a la actividad proteasa. La optimización de la orientación y de los enlazadores mostró que las fusiones C-terminales y ciertos enlazadores flexibles producían la transferencia de energía más eficiente. Al ser probados con las proteasas del Virus del Mosaico del Tabaco (TEV) y del Virus del Moteado de la Vena del Tabaco (TVMV), los sensores generaron cambios de emisión claramente diferenciables, permitiendo una detección autónoma y no invasiva de la infección viral en planta. En conjunto, esta Tesis demuestra el desarrollo de módulos de control modulares y sistemas de reporte autónomos que refuerzan el flujo de Diseño-Construcción-Prueba-Aprendizaje (DCPA) en Biología Sintética Vegetal. Los reguladores anti-CRISPR, la ruta de bioluminiscencia fúngica rediseñada y los sensores diagnósticos basados en BRET contribuyen colectivamente a mejorar la precisión, la modularidad y la aplicabilidad de los circuitos genéticos diseñados en plantas., This work was supported by grant PID2019-108203RB-I00 Plan Nacional I+D from the Ministerio de Ciencia e Innovación (Spain) through the Agencia Estatal de Investigación (co-financed by the European Regional Development Fund). C.C., M.V.-V. and E.M.-G are the recipients of fellowships FPI-UPV (PAID-01-20) from Universitat Politecnica de Valencia, APOSTD/2020/096 from the Generalitat Valenciana and FPU18/02019 from the Spanish Ministry of Science, Innovation and Universities, respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effects of cold seawater pre-treatments on induction of early sexual maturation and sperm production in European eel (Anguilla anguilla)

  • Ferrão, Leonor
  • Morini, Marina
  • González-López, Wendy Ángela
  • Felip, Alicia
  • Gallego Albiach, Victor|||0000-0002-9733-0625
  • Pérez Igualada, Luz María|||0000-0002-6678-7446
  • Asturiano, Juan F.|||0000-0002-6441-5294
[EN] To induce sexual maturation in captivity, eels rely on hormonal treatments, but this process is costly and time-consuming. As an alternative, different types of conditioning, also referred as pre-treatment, have been assessed to ease hormonal treatment response. Recent studies have shown that migrating eels experience a wide range of temperatures, varying from 12 °C at night to as low as to 8 °C during the day. Therefore, this study evaluates the effects of low-temperature (10 °C) seawater pre-treatments of different durations (2 and 4 weeks) on male eel reproduction. The eye, gonadosomatic and hepatosomatic indexes from control (without thermic seawater pre-treatment) and pre-treated fish were measured. Blood and testis samples were also collected for sex steroid and histology analysis, respectively. Eels pre-treated for 2 weeks demonstrated increased progestin levels, comparing with the control group. Eels pre-treated for 4 weeks showed significantly higher gonadosomatic index and elevated androgens and estradiol levels in comparison with the remaining groups. In eels pre-treated for 2 and 4 weeks, there was an increase in the proportion of spermatogonia type B cells compared to undifferentiated spermatogonia type A, a differentiation process that was not observed in the control group. Cold seawater pre-treatment induced early sexual maturation, including steroid production, which consequently stimulated biometric changes and increased spermatogonia differentiation. Following the pre-treatments, eels started receiving standard hormonal treatment (with recombinant human chorionic gonadotropin at 20 °C). Pre-treated males started to spermiate earlier than the control group. In some treatment weeks, pre-treated individuals registered higher values of sperm density, motility, and kinetic parameters. Moreover, an economic evaluation was carried out relating the investment made in terms of hormone injections with the volume of high-quality sperm obtained from each experimental group. The low temperature pre-treatments demonstrated their economic effectiveness in terms of hormone treatment profitability, increasing the production of high-quality sperm in the European eel. Thus, this in vivo study suggests that cold seawater pre-treatment may increase sensitivity to the hormone applied during standard maturation treatment., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. Funded by the Spanish Ministry of Science, Innovation and Universities (MCIU; Project EELGONIA; RTI2018-096413-B-I00). L.F. had a PhD contract funded by the Generalitat Valenciana, Programa Grisolía (GRISOLIAP/2020/063). M.M. had a postdoctoral contract from the MCIU (MCIN/AEI/https:// doi.org/10.13039/501100011033) funded by European Union NextGenerationEU/ PRTR (C17. I1) and by Generalitat Valenciana (THINKINAZUL/2021/012) to SEASPERM. W.A.G.- L had a Margarita Salas postdoctoral contract (RD 289/2021.UAB) from the Spanish Ministry of Universities. V.G. had a Beatriz Galindo aid (BG22/00024; for the attraction of research talent 2022) funded by the Ministerio de Universidades (Spain). Funding for open access charge: CRUE-Universitat Politècnica de València
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Influence of voluntary contractions on the basal sEMG activity of the pelvic floor muscles

  • Albaladejo-Belmonte, Monica
  • Tarazona-Motes, Marta
  • Nohales-Alfonso, Francisco J.
  • Alberola-Rubio, Jose
  • Garcia-Casado, Javier|||0000-0003-1410-2721
[EN] Chronic pelvic pain (CPP) is a complex clinical condition that affects many women, being sometimes misdiagnosed or mistreated,which can be treated with the infiltration of botulinum toxin (BoNTA). The pelvic floor musculature (PFM) condition from CPP patients can be assessed by means of surface electromyography (sEMG). The evaluation of the basal activity can help to detect a muscular dysfunction, therefore it is important to ensure that the PFM shows a minimum activation when its sEMG is being analysed. In this study, we recorded the sEMG of 25 women with CPP before and 8, 12 and 24 weeks after their treatment with BoNTA while they performed a protocol of 5 voluntary contractions. The root mean square (RMS) and sample entropy (SampEn) of basal segments pre- (B[PRE]), inter- (B[I]) and post- (B[POST]) contractions of the sEMG were computed and normalized according to the minimum (RMSnorm) and maximum (SampEnorm) of the recording. B(PRE) showed the lowest RMSnorm median both before and after the treatment with BoNTA, which proved that the activity of the PFM is minimum before the first contraction. As for SampEnnorm, although results were not so conclusive, they also indicated that B(PRE) should be taken as a reference to analyse the PFM function at its state of minimum activity. Future works aiming to characterize the effects of BoNTA in PFM by means of sEMG should consider basal segments before contractions to assess basal tone conditions., This study was funded by ISCIII, MCIU, VLC Campus in Convocatoria Ayudas: UPV-La Fe (INBIO): 2016 SPEHG (ID:C18), 2019 sEMG_BONTAv (ID:C06) and with funds from private contracts with Merz Pharma España S.L.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Alkene Cross-Metathesis with 2,5-Dimethyl-2,4-Hexadiene Enables Isobutylenyl/Prenyl Functionalizations and Rubber Valorization

  • Mingueza-Verdejo, Paloma
  • Rodríguez-Nuévalos, Silvia|||0000-0002-5361-1169
  • Oliver-Meseguer, Judit|||0000-0003-1555-3583
  • Leyva Perez, Antonio|||0000-0003-1063-5811
[EN] 2,5-Dimethyl-2,4-hexadiene is a readily available and easily managable compound, whose symmetric and polymethylated dienic structure should be prone to engage in cross-metathesis reactions with other alkenes, but this has not been apparently exploited so far. Here we show that this reactant enables the easy synthesis of tri- and tetra-susbtituted alkenes (i. e. isobutylenyl and prenyl groups) from simple alkenes under mild reaction conditions, not only with the conventional 2nd generation Grubbs catalyst but also with other Grela-type catalyts such as StickyCat,TM AquaMetTM and GreenCatTM. The use of liquid and low volatile 2,5-dimethyl-2,4-hexadiene avoids the use of gaseous alkene reactants and, besides, showcases the reactivity of polyisoprene (rubber), thus allowing to optimize the reaction conditions for rubber upcycling, after metathesis reaction of the pristine or used polymer with simple alkenes. These results bring low volatile isoprene-type compounds as privileged poly-substituted reactants for alkene cross-metathesis reactions.; 2,5-Dimethyl-2,4-hexadiene is presented here as a suitable and selective reactant for delivering either prenyl or isobutylenyl groups to alkenes through a cross-metathesis reaction. The process smoothly operates at room temperature, give high yields of products, includes a late-stage transformation, and enables the valorization of real samples of recycled rubber. image, This work is part of the project PID2020-115100GB-I00 funded by MCIN/AEI/10.13039/501100011033MICIIN (Spain). Financial support by Severo Ochoa centre of excellence program (CEX2021-001230-S) is gratefully acknowledged. The work has also been funded by Generalitat Valenciana (INNEST/2022/20 from Agencia Valenciana de la Innovacio). P.M.-V. thanks ITQ, UPV-CSIC for concession of a contract (PAID 01-20). S.R.-N. thanks Agencia Valenciana de la Innovacio for a contract (INNEST/2022/20). J.O.-M. thanks the MICIIN for the concession of the Ramon y Cajal contract RYC2022-036154-I (funded by MCIN/AEI/10.13039/501100011033).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Single-atom Cu catalysts for the oxidative coupling of styrenes with aryl sulfones: from salts and zeolites to MOFs

  • Bilanin-Artigado, Cristina
  • Zheng, Yongkun
  • Pardo, Emilio
  • Vidal Moya, José Alejandro
  • Mon-Conejero, Marta|||0000-0002-1983-1096
  • Leyva Perez, Antonio|||0000-0003-1063-5811
[EN] Oxidative couplings in organic synthesis are typically performed with unrecoverable precious metal catalysts in solution. Here we show that CuCO3, Cu-supported zeolites and Cu-metal organic frameworks (MOFs) can replace AgNO3 as a catalyst for the oxidative coupling of styrenes with aryl sulfones, to give styrenyl sulfones. The single Cu atoms supported in zeolites show higher catalytic activity than the Cu salt as the basicity of the zeolite framework increases, to match the carbonate salt, and when embedded directly into a MOFs ' walls with oxamate ligands (thus with the proper electronic environment) they can be recycled for at least five times without any depletion in catalytic activity. These results showcase not only the substitution of a noble metal (Ag) by an abundant metal (Cu) in a metal-catalyzed oxidative coupling reaction, but also going from a salt to a supported solid catalyst, of high significance from a sustainable point of view., Financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033) is gratefully acknowledged. This work was also supported by the MICIIN (Spain) through projects TED2021-130465B-I00, PID2020-115100GB-I00, PID2019-104778GB-I00 and "Maria de Maeztu" CEX2019-000919-M. The Generalitat Valenciana (Project PROMETEO/2021/054) is also acknowledged. E.P. acknowledges the financial support of the European Research Council under the European Union's Horizon 2020 research and innovation programme/ERC Grant Agreement No 814804, MOF-reactors. M.M. thanks MICIIN from a contract under the Juan de la Cierva program (FJC2019-040523-I) . C.B. thanks ITQ/UPV-CSIC for a contract (PAID 01-20) . Y.Z. thanks to the China Scholarship Council (CSC No: 202009350009) for a Ph.D. fellowship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

One-Pot Synthesis of Terminal Alkynes from Alkenes

  • Bilanin-Artigado, Cristina
  • Singh, Amravati Shivaji
  • Martínez-Belenguer, Lluis
  • Leyva Perez, Antonio|||0000-0003-1063-5811
[EN] The direct synthesis of terminal alkynes from widely available terminal alkenes is an unmet challenge in organic synthesis. Here, we show that alkyl and aromatic terminal alkenes can be converted to the corresponding alkynes in a one-pot process consisting of a Ru-catalyzed dehydrogenative hydrosilylation, followed by an oxidative dehydrogenative reaction of the vinyl silane intermediate, enabled by the combination of PhIO with BF3. This formal alkene dehydrogenation reaction with commercially available reagents and under mild reaction conditions gives access to terminal alkynes in a simple manner, including acetylene., Financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033, and PID2020-115100GB-I00) is gratefully acknowledged. C.B. thanks ITQ/UPV-CSIC for a contract (PAID 01-20). A.S.S. also thanks ITQ for the concession of a contract.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Rapid aerodynamic characterization of surface heat exchangers for turbofan aeroengines through optical techniques and additive manufacturing

  • Broatch, A.|||0000-0001-9991-1039
  • García-Tíscar, Jorge|||0000-0003-4934-4587
  • Quintero-Igeño, Pedro-Manuel|||0000-0003-4373-2079
  • Felgueroso-Rodríguez, Andrés
[EN] Surface heat exchangers that use the bypass flow as heat sink are becoming a widely used solution to alleviate the high thermal load of modern aeroengines. Experimental characterization of such heat exchangers in full-scale engine tests is extremely expensive and time-consuming, so carrying out experiments in scaled wind tunnels that can replicate their very challenging flow conditions is highly desirable. However, intrusive instrumentation can affect the actual aerodynamics of the component due to the reduced size of the section and the typical high air velocities of turbofan engines. For this reason, a methodology to characterize a surface heat exchanger designed to work in the turbofan bypass using optical techniques is presented in this work. Additionally, the possibility of replicating the experimental conditions using additively manufactured models of exchangers would allow rapid preliminary characterization of these components. In this investigation, different non-intrusive techniques such as PIV, LDA, Schlieren, or LDV have been applied to determine the heat exchanger aerodynamic performance and vibration response, and a detailed characterization of the flow field has been carried out. Data have been cross-validated using different measurement techniques. A 3D-printed model has also been built to compare with the aluminum heat exchanger, showing almost an identical behavior in terms of velocity distribution downstream of the heat exchanger and pressure drop induced by its fins, as well as corrected frequencies, confirming thus the suitability of additive manufacturing for the aerodynamic characterization of these devices in preliminary stages., A. Felgueroso was supported through the Programa de Apoyo parala Investigacion y Desarrollo of the Universitat Politecnica de Valencia under grant PAID-01-20 no 21589. Funding for open access charge: CRUE-Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Bioluminescent sentinel plants enable autonomous diagnostics of viral infections

  • Calvache-Román, Camilo Alberto
  • García-Pérez, Elena
  • Fleiss, Aubin
  • Ezzeddin-Ayoub, Mustafa
  • Pasin, Fabio
  • Sarkisyan, Karen S.
  • Vázquez-Vilar, Marta
  • Rodríguez-Rodríguez, Marta
  • Victor
  • Daròs, José-Antonio|||0000-0002-6535-2889
  • Orzáez Calatayud, Diego Vicente
[EN] Plants engineered with synthetic genetic programs can transform how we monitor and manage the extension of crop pests and diseases. Here, we establish a bioluminescent platform in Nicotiana benthamiana for autonomous viral sensing based on the fungal bioluminescence pathway (FBP). We first demonstrate that recombinant viruses can deliver missing pathway components, establishing a methodological framework for spatially resolved tracking of infection dynamics. Leveraging this starting point, we develop a dual-output sentinel circuit that uses a protease-responsive bioluminescence resonance energy transfer (BRET) module to report infection through a virus-triggered spectral shift in luminescence. In the absence of infection, plants emit a stable yellow glow indicating system integrity. Upon infection with potyviruses, cleavage of the BRET fusion by the virus-encoded NIa-protease activates a distinct colour change detectable with low-cost imaging. This modular design is compatible with other pathogens carrying specific proteases and supports future multiplexing strategies. Our results highlight the potential of synthetic sentinel gene circuits as autonomous biosensors for precision crop protection., C.C. is recipient of a FPI-UPV fellowship (ref. PAID-01-20, Universitat Politecnica de Valencia), M. R-R is recipient of a FPU fellowship (ref. FPU21/00055, Ministerio de Ciencia, Innovacion y Universidades, Spain), V. V-V is recipient of a FPI fellowship (ref. PREP2022-000602, Ministerio de Ciencia, Innovacion y Universidades, Spain) and E.G-P recipient of ACIF fellowship (ref. ACIF/2020/309, Generalitat Valenciana); F.P. is supported by RYC2023-045411-I (Ministerio de Ciencia, Innovacion y Universidades, Spain). This research was supported by the Ministerio de Ciencia, Innovacion y Universidades (Spain) through Agencia Estatal de Investigacion (grants PID2022-141438OB-I00 and PID2023-146418OB-I00; MICIU/AEI/10.13039/501100011033 and ERDF, EU), by Generalitat Valenciana (Grant CIPROM/2022/21) and by by the European Union under the European Regional Development Fund (ERDF, EU) Programme, Comunitat Valenciana 2021-2027 (Grant INNEST/2025/49). The Synthetic Biology Group is funded by the MRC Laboratory of Medical Sciences (UKRI MC-A658-5QEA0) and UKRI Biotechnology and Biological Sciences Research Council through the International Science Partnerships Fund (grant number APP33664).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Evaluation of GDI spray structures under flash boiling and strong collapse conditions with diverse fuels

  • Payri, Raul|||0000-0001-7428-5510
  • Marti-Aldaravi, Pedro|||0000-0003-4650-4004
  • Mendoza Alvarez, Victor
  • Bautista, Abian
[EN] GDI (Gasoline Direct Injection) sprays are a matter of continuous research due to their potential for higher thermal efficiency and power output. Injections in GDI engines tend to happen at relatively high temperatures, which, combined with volatile fuels, are a perfect environment for flashing sprays, which are present in recently developed GDI engine passenger cars. Phenomena like flash boiling and especially spray collapse are still being investigated due to their complexity and impact on the engine performance. In the present research, the impact of different levels of flash boiling in the sprays is analyzed. Four surrogate mono-component fuels were tested with different volatile properties. Two optical techniques were carried out simultaneously: light extinction images (DBI) and frontal MIE scattering. The spray width was used to represent the radial expansion and study its relation with the spray collapse due to flash boiling. The degree of collapse was quantified by means of the instantaneous spray width variation for which three levels of collapse were identified. A novel MIE frontal approach was employed to study the spray surface evolution and the collapsing time by monitoring the nozzle tip clouding (opaquing) by the fuel. Results showed an increment of the width with the ratio of saturation to ambient pressure (R¿), as well as a strong correlation between the spray surface and the R¿ at each fuel temperature when the spray is stabilized. Based on the MIE technique, three collapse instants were identified throughout the injection time depending on the R¿., This work was funded by the Spanish Ministerio de Ciencias e Inno-vacion through project reference PID2021-1258120B-C21. The author Victor Mendoza thanks the Universitat Politecnica de Valencia for his predoctoral contract, which is included within the framework of "Programa Propio de la Universitat Politècnica de València - Subprograma 1 (PAID-01-20) ".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Estudio del interferómetro de Michelson mediante un laboratorio virtual, Study of the Michelson interferometer by means of a virtual laboratory

  • Muñoz-Pérez, Francisco M.
  • Ortega Mendoza, J. Gabriel
  • Monsoriu Serra, Juan Antonio|||0000-0003-3350-7951
[EN] Interference is a phenomenon of wave physics that occurs when two or more waves overlap. In the case of light, this results in patterns of light and shadow. In this paper, we present a virtual laboratory developed as a graphical user interface (GUI) in Matlab software, which aims to facilitate the study of the interference phenomenon of light for different wavelengths. The main goal is to provide students of Physics and Optics, both at undergraduate and graduate level, with the necessary skills to understand the wave behavior of light through the analysis of the interference pattern generated., [ES] La interferencia es un fenómeno de la física de ondas que se produce cuando dos o más ondas se superponen. En el caso de la interferencia de la luz, esto resulta en patrones de luz y sombra. En este trabajo, presentamos un laboratorio virtual desarrollado como interfaz gráfica de usuario (GUI) en el software Matlab. que tiene como propósito facilitar el estudio del fenómeno de interferencia de la luz para diferentes longitudes de onda. La meta principal es proporcionar a los estudiantes de asignaturas de Física y Óptica, tanto a nivel de pregrado como de grado, las competencias necesarias para comprender el comportamiento ondulatorio de la luz a través del análisis del patrón de interferencia generado., Este trabajo ha sido financiado por el Ministerio de Ciencia e Innovación (PID2022-142407NB-I00) y por la Generalitat Valenciana (CIPROM/2022/30). F.M.M.P. también agradece la financiación de la Universitat Politècnica de València (PAID-01-20-25). Este trabajo ha sido desarrollado por el Equipo de Innovación y Calidad Educativa MSEL de la Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Enhancing Six Sigma with latent variable models: An industrial application of multivariate Six Sigma in the automotive sector

  • García-Carrión, Sergio
  • Pozueta, Lourdes
  • Ferrer, Alberto|||0000-0001-7244-5947
[EN] The traditional Six Sigma toolkit presents significant limitations for problem solving in Industry 4.0 settings. To address these limitations, it can be extended with latent variable-based multivariate statistical techniques such as Principal Component Analysis (PCA) and Partial Least Squares (PLS), in what has been referred to as multivariate Six Sigma. In this work, this approach is applied to address vibration performance issues in the caliper, a key component of a car's braking system. By appropriately integrating these techniques into the five-step DMAIC cycle, the root cause was satisfactorily identified, an effective corrective action was implemented, and the objectives of the project were successfully achieved. This case study provides further evidence of the practical utility of multivariate Six Sigma and demonstrates its potential for broader adoption in industrial projects., This work was supported by the Research and Development Support Program of the UPV (PAID-01-20) and by the Generalitat Valenciana (AICO/2021/111 and CIAICO/2023/189).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis doctoral (DoctoralThesis)

Application of Data-Driven Strategies for Control and Diagnostics in Automotive Engine Systems

  • Aramburu Orihuela, Alexandra
[ES] La creciente demanda por un transporte sostenible y las regulaciones cada vez más estrictas sobre emisiones han puesto a la industria automotriz bajo presión para adoptar soluciones innovadoras. Los motores de combustión interna (MCIA) siguen siendo predominantes gracias a su infraestructura establecida, su bajo costo y mayor autonomía en comparación con otro tipo de vehículos, pero enfrentan grandes retos a la hora de reducir emisiones contaminantes como el CO2 y los NOx. Al mismo tiempo, la disponibilidad de información procedente de nuevos sensores y a través de conexiones IoT, I2V y V2V, así como el desarrollo de nuevas arquitecturas de hardware, está facilitando la introducción de nuevas tecnologías. Mejorar la eficiencia y el rendimiento medioambiental de los MCIA es crucial como parte de la transición hacia una movilidad sostenible. Esta tesis propone el uso de metodologías basadas en datos, enfocándose en técnicas de aprendizaje automático (ML, por sus siglas en inglés), para desarrollar modelos orientados al control y sistemas de diagnóstico para los MCIA. El presente trabajo incluyó un extenso análisis de datos provenientes de varios sensores del motor, particularmente las señales de presión dentro del cilindro y del sensor de knock, con el objetivo de identificar características predominantes del proceso de combustión. Se utilizaron técnicas como la descomposición de valores singulares (SVD) para la extracción de dichas características. Se aplicaron redes neuronales artificiales (ANN) y máquinas de aprendizaje extremo (ELM) para modelar parámetros que permitan describir el proceso de combustión y poder predecir el comportamiento del motor. Además, se aplicaron técnicas de ML supervisadas y no supervisadas para detectar anomalías como la detonación (knock) y la falla de encendido. Los resultados obtenidos a lo largo de este estudio demuestran el potencial de las técnicas basadas en datos para mejorar significativamente la predicción de la combustión y la detección de fallos en los MCIA. La capacidad de predecir y diagnosticar dinámicamente los eventos de combustión abre oportunidades para optimizar el rendimiento del motor, mejorar la eficiencia, reducir las emisiones y prolongar su vida útil. Las técnicas de aprendizaje automático propuestas mostraron una gran adaptabilidad a la hora de estimar los parámetros de combustión y precisión en la identificación de fallos en diferentes condiciones de funcionamiento del motor, superando la dependencia de los métodos tradicionales caracterizados por esfuerzos de calibración que requieren mucho tiempo y sesgos cuando se enfrentan a fenómenos complejos. Al integrar estos métodos en los futuros sistemas de gestión de motores, la industria automovilística podrá beneficiarse de diagnósticos más sensibles y adaptables, lo que garantizará que la tecnología ICE siga siendo relevante y sostenible en el cambiante panorama del transporte., [CA] La creixent demanda per un transport sostenible i les regulacions cada cop més estrictes sobre emissions han posat a la indústria automotriu sota pressió per a adoptar solucions innovadores. Els motors de combustió interna (MCIA) continuen sent predominants gràcies a la infraestructura establida, el baix cost i major autonomia en comparació amb una altra mena de vehicles, però enfronten grans reptes a l'hora de reduir emissions contaminants com el CO¿ i els NOx. Al mateix temps, la disponibilitat d'informació procedent de nous sensors i a través de connexions IoT, I2V i V2V, així com el desenvolupament de noves arquitectures de hardware, està facilitant la introducció de noves tecnologies. Millorar l'eficiència i el rendiment mediambiental dels MCIA és crucial com a part de la transició cap a una mobilitat sostenible. Esta tesi proposa l'ús de metodologies basades en dades, enfocant-se en tècniques d'aprenentatge automàtic (ML, per les seues sigles en anglés), per a desenvolupar models orientats al control i sistemes de diagnòstic per als MCIA. El present treball inclau una extensa anàlisi de dades provinents de diversos sensors del motor, particularment dels senyals de pressió dins del cilindre i del sensor de knock, amb l'objectiu d'identificar característiques predominants del procés de combustió. S'han utilitzat tècniques com la descomposició de valors singulars (SVD) per a l'extracció d'aquestes característiques. Es van aplicar xarxes neuronals artificials (ANN) i màquines d'aprenentatge extrem (ELM) per a modelar paràmetres que permeten descriure el procés de combustió i poder predir el comportament del motor. A més, es van aplicar tècniques de ML supervisades i no supervisades per a detectar anomalies com la detonació (knock) i la falla d'encesa. Els resultats obtinguts al llarg d'aquest estudi demostren el potencial de les tècniques basades en dades per a millorar significativament la predicció de la combustió i la detecció de fallades en els MCIA. La capacitat de predir i diagnosticar dinàmicament els esdeveniments de combustió obri oportunitats per a optimitzar el rendiment del motor, millorar l'eficiència, reduir les emissions i prolongar la seua vida útil. Les tècniques d'aprenentatge automàtic propostes van mostrar una gran adaptabilitat a l'hora d'estimar els paràmetres de combustió i precisió en la identificació de fallades en diferents condicions de funcionament del motor, superant la dependència dels mètodes tradicionals caracteritzats per esforços de calibratge que requerixen molt temps i errors quan s'enfronten a fenòmens complexos. En integrar aquests mètodes en els futurs sistemes de gestió de motors, la indústria automobilística podrà beneficiar-se de diagnòstics més sensibles i adaptables, la qual cosa garantirà que la tecnologia ICE continue sent rellevant i sostenible en el canviant panorama del transport., [EN] The pressing need for sustainable transport and increasingly stringent emissions regulations have put pressure on the automotive industry to adopt innovative solutions. Internal combustion engines (ICEs) remain dominant due to their high energy density and established infrastructure but face significant challenges in reducing harmful emissions such as CO2 and NOx. At the same time, the availability of information from new sensors and through IoT, I2V and V2V connections, as well as the development of new hardware architectures, is facilitating the introduction of new technologies. Improving the efficiency and environmental performance of ICEs is crucial as part of the transition to sustainable mobility. The thesis proposes the use of data-driven methodologies, focusing on machine learning (ML) techniques, to develop control-oriented models and diagnostic systems for ICEs. The research included extensive data analysis of various engine sensors, particularly in-cylinder pressure and vibration signals, to identify predominant features of the combustion process. Techniques such as Singular Value Decomposition (SVD) were used for feature extraction, while Artificial Neural Networks (ANN) and Extreme Learning Machines (ELM) were used to model combustion parameters and predict engine behaviour. In addition, unsupervised and supervised ML techniques were applied to detect anomalies such as knock and misfire, offering accurate diagnostics of combustion instabilities. The results obtained throughout this study demonstrate the potential of data-driven techniques to significantly improve combustion prediction and fault detection in ICEs. The ability to dynamically predict and diagnose combustion events opens up opportunities to optimize engine performance, enhance efficiency, reduce emissions, and extend engine life. The proposed machine learning techniques showed strong adaptability when estimating combustion parameters and accuracy in identifying faults under different engine operating conditions, overcoming the reliance on traditional methods characterised by time-consuming calibration efforts and bias when facing complex phenomena. By integrating these methods into future engine management systems, the automotive industry can benefit from more responsive and adaptive diagnostics, ensuring ICE technology remains relevant and sustainable in the evolving transportation landscape., The completion of this thesis has been made possible thanks to the support received through a grant from Vicerrectorado de Investigación of Universitat Politècnica de València with reference FPI UPV SUBP2 (PAID-01-20)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Modifying Kurchatov&apos, s method to find multiple roots of nonlinear equations

  • Cordero Barbero, Alicia|||0000-0002-7462-9173
  • Garrido-Saez, Neus|||0000-0002-7903-8591
  • Torregrosa Sánchez, Juan Ramón|||0000-0002-9893-0761
  • Triguero-Navarro, Paula|||0000-0002-7319-9992
[EN] We present a modification of Kurchatov's iterative method in order to solve a nonlinear equation with multiple roots, that is, for approximating solutions with multiplicity greater than one. One of its principal advantages is that you do not have to know a priori the multiplicity of the root, since it does not appear in the iterative expression. In order to examine the behaviour of the proposed method, we perform a dynamical analysis. Furthermore, we carry out some numerical experiments in order to confirm the theoretical results and compare the proposed method with other known methods for dealing with multiple roots., This research was partially supported by Spanish Ministerio de Ciencia, Innovacion y Universidades PGC2018-095896-B-C22 and was partially supported by Universitat Politecnica de Valencia Contrato Predoctoral PAID-01-20-17 (UPV) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of the chain length of geraniol esters on the plasticization efficiency with poly(lactide)

  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
  • Garcia-Garcia, Daniel|||0000-0002-2520-0186
  • Balart, Rafael|||0000-0001-5670-7126
  • Tejada-Oliveros, Ramón
  • Moreno-García, Virginia
[EN] This work reports on the development of environmentally friendly PLA formulations utilizing different esters derived from geraniol as plasticizers. Geranyl formate, acetate, propionate, butyrate, isovalerate and caproate at 10 wt% were combined with PLA in formulations that were produced through extrusion and injection moulding processes. Theoretical solubility parameter studies predicted good miscibility between PLA and all the plasticizers. This was confirmed by tensile test, which showed elongation at break values between 200 and 300 %, totally in contrast with the 8 % value of neat PLA. Geranyl acetate and geranyl formate exhibited the highest elongation at break behavior. These values of elongation at break were supported by FESEM images, which showed clear signs of plasticization. The plasticization effect was further corroborated by DSC and DMTA analysis, where a clear decrease in the glass transition temperature was observed from a typical value of 60 °C for neat PLA down to 40¿50 °C for the plasticized blends. This was related to an enhanced chain mobility of the amorphous regions of PLA. Moreover, the plasticizers slightly increased the water absorption capabilities of PLA, as demonstrated by an increase in the water contact angle and water uptake for 11 weeks., This research is a part of the grant PID2020-116496RB-C22, funded by MCIN/AEI/10.13039/501100011033 and the grant TED2021- 131762A-I00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union "NextGenerationEU"/PRTR. Authors also thank Generalitat Valenciana-GVA for funding this research through the grant numbers AICO/2021/025 and CIGE/2021/094. Funded with Aid for First Research Projects (PAID-06-22), Vice -rectorate for Research of the Universitat Politecnica de Valencia (UPV) . R.T.-O. wishes to thank UPV for the grant received though the PAID-01-20 program. J. I.-M. wants to thank FPU19/01759 grant funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future. J. G.-C. wants to thank FPU20/01732 grant funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future. V. M. thanks Ge eralitat Valenciana-GVA for funding a postdoc position through the APOSTD program co -funded by ESF Investing in your future, grant number CIAPOS/2021/67. Microscopy Services at UPV are also acknowledged by their help in collecting and analyzing images.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

The multiple and contested worlds of urban food governance: The case of the city of Valencia

  • Zerbian, Tanya
  • Segura-Calero, Sergio
  • Escario-Chust, Ana|||0000-0002-8094-9894
  • Palau-Salvador, Guillermo|||0000-0003-0492-6567
[EN] Cities are positioned as critical actors in agri-food sustainability transitions through the implementation of food policy councils and food strategies for urban policymaking. Promoting participatory arrangements in food policymaking allows multiple actors to engage in a contested process of mutual learning that helps construct a common goal. The development of these multi-actor instruments has meant that social movements have had the possibility of reclaiming power in the governance spaces of cities, contributing to urban agri-food transitions. Nevertheless, while signalling that transition governance instruments can bring more inclusive and collective change, critical studies call for the need to pay attention to power dynamics in these processes. Drawing from this notion, this paper explores how diverse governance actors mobilise and execute power within and between two urban food governance instruments ¿ an agri-food transition platform and a food policy council ¿ in Valencia, Spain. The study contributes to urban food governance and sustainability transitions governance literature through raising three critical points regarding the potential of urban food governance processes for sustainability transitions: the longitudinal and cross-scale evaluation of power dynamics and subsequent tensions, the acknowledgement of different kinds of power, and the possible coexistence of different but symbiotic spaces for transition governance., This piece of research work has received funding from the Generalitat Valenciana and the European Social Fund through the postdoctoral grant CIAPOS/2021/178. This research has been partly funded by the European Commission under the DTA3/COFUND Marie Sklodowska-Curie PhD Fellowship (Grant Agreement 801604) and the Program of the Polytechnic University of Valencia Subprogram 1 (PAID-01-20).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Study of the hydraulic characteristics of two injectors fed with different fuels in a GDI system

  • Payri, Raul|||0000-0001-7428-5510
  • Gimeno, Jaime|||0000-0003-3317-9994
  • Marti-Aldaravi, Pedro|||0000-0003-4650-4004
  • Mendoza Alvarez, Victor
[EN] In the latter years, the Gasoline Direct Injection systems (GDI) have been studied with the aim of providing a solution to the particulate matter emission issue. It has been proved that emission levels are reduced with the tuning of certain variables, such as the injection pressure, that affect the internal flow in the nozzle, which in turn plays an vital role in the spray development. On the other hand, the implementation of fuels such as alcohols and some surrogates shows potential for improving the engine performance and emissions because of the different physical properties of the fuels that can alter the mixture formation and the chemical properties that affect the combustion. In this work, an experimental study of the influence of different fuels on the internal flow is realized for a vast number of conditions, including those that promote flash boiling and strong collapse of the spray at different ambient temperatures and pressures. The fuels employed are three components of gasoline: iso-octane, n-hexane and n-pentane; ethanol; and two blends (E00 and E20) for two nozzle geometries. Two experimental techniques are used to measure the mass flow rate and momentum flux of the spray, and then characterize the flow inside the nozzle. The results show a similar injector behavior for all fuels, except for the ethanol, which shows an increase in the rate of injection and induces a hydraulic delay., This work has been partially funded by Generalitat Valenciana "Nuevos conceptos en inyeccion de gasolina (NCIG)'', Spain with AICO/2020/208 reference. The author Victor Mendoza thanks the Universitat Politecnica de Valencia, Spain for his predoctoral contract, which is included within the framework of "Programa Propio de la Universitat Politecnica de Valencia -Subprograma 1 (PAID-01-20)''.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Design of iterative methods with memory for solving nonlinear systems

  • Cordero Barbero, Alicia|||0000-0002-7462-9173
  • Garrido-Saez, Neus|||0000-0002-7903-8591
  • Torregrosa Sánchez, Juan Ramón|||0000-0002-9893-0761
  • Triguero-Navarro, Paula|||0000-0002-7319-9992
[EN] In this paper, we design two parametric classes of iterative methods without memory to solve nonlinear systems, whose convergence order is 4 and 7, respectively. From their error equations and to increase the convergence order without performing new functional evaluations, memory is introduced in these families of different forms. That allows us to increase from 4 to 6 the convergence order in the first family and from 7 to 11 in the second one. We perform some numerical experiments with big size systems for confirming the theoretical results and comparing the proposed methods along other known schemes., Ministerio de Ciencia e Innovacion, Grant/Award Number: PGC2018-095896-B-C22; European Union; Universitat Politecnica de Valencia Contrato Predoctoral, Grant/Award Number: PAID-01-20-17
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Spectral Analysis of Anomalous Capacitance Measurements in Interleaving Structures: Study of Frequency Distribution in Photomultipliers

  • Milian Sánchez, Víctor
  • Balvis Outeiriño, Eduardo
  • Sahu, Sarira
  • Iglesias-Martínez, Miguel Enrique|||0000-0003-1405-5099
  • Guerra-Carmenate, José
  • Castro-Palacio, Juan Carlos|||0000-0002-0132-9989
  • Fernández de Córdoba, Pedro|||0000-0002-0347-7280
  • Muñoz-Pérez, Francisco Misael|||0000-0002-0313-5029
  • Monsoriu Serra, Juan Antonio|||0000-0003-3350-7951
[EN] This study presents experimental results on capacitance fluctuations in several devices located within an interleaving structure. Specifically, it examines the behavior of the capacitance between the anode and cathode of a photomultiplier, comparing it with the characteristics of the ultra-stable capacitor analyzed in a previous paper via measurements inside and outside a modified Faraday cage. The results cover spectral and correlation analyses both inside and outside the box, confirming differences in the spectrum using the periodograms. In particular, the confidence intervals for the mean capacitance values show significant changes between the two scenarios, from the inside to the outside of the enclosure. In the case of the ultra-stable capacitor, there is an increase from 0.004 to 0.008 nF. On the other hand, a symmetry analysis is conducted for all measurements taken both outside and inside the modified Faraday cage. It is observed that in all cases, there is clear non-symmetric behavior in the data., Miguel E. Iglesias Martínez s work was partially supported by the postdoctoral research scholarship Ayudas para la recualificación del sistema universitario español 2021 2023. Modalidad: Margarita Salas from the Ministerio de Universidades, Spain, funded by the European Union-Next Generation EU and additionally funded by Ayuda para potenciar la investigación postdoctoral de la UPV (PAID-PD-22) . The work of S.S. is partially supported by DGAPA-UNAM (México) Project No. IN103522. This work was supported by the Spanish Ministerio de Ciencia e Innovación (PID2022-142407NB-I00) and by Generalitat Valenciana (grant CIPROM/2022/30), Spain. F.M.M.P also acknowledges the financial support from the Universitat Politècnica de València (PAID-01- 20-25), Spain. This work was supported by the Spanish government (PID2021-128676OB-I00 and PID2022-142407NB-I00) and by Generalitat Valenciana (grant CIPROM/2022/30), Spain
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Three-step iterative weight function scheme with memory for solving nonlinear problems

  • Cordero Barbero, Alicia|||0000-0002-7462-9173
  • Garrido-Saez, Neus|||0000-0002-7903-8591
  • Torregrosa Sánchez, Juan Ramón|||0000-0002-9893-0761
  • Triguero-Navarro, Paula|||0000-0002-7319-9992
[EN] In this manuscript, we present a parametric family of derivative-free three-step iterative methods with a weight function for solving nonlinear equations. We study various ways of introducing memory to this parametric family in order to increase the order of convergence without new functional evaluations. We also performed numerical experiments to compare the iterative methods from different points of view., Ministerio de Ciencia e Innovacion, Grant/Award Number: PGC2018-095896-B-C22; Universidad Internacional de La Rioja; Universitat Politecnica de Valencia, Grant/Award Number: PAID-01-20-17
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Comparative Study of Numerical Methods for Solving the Fresnel Integral in Aperiodic Diffractive Lenses

  • Garmendía-Martínez, Adrián|||0000-0003-3443-5144
  • Gimenez Palomares, Fernando
  • Castro-Palacio, Juan Carlos|||0000-0002-0132-9989
  • Monsoriu Serra, Juan Antonio|||0000-0003-3350-7951
  • Ferrando, Vicente|||0000-0002-7434-7109
  • Muñoz-Pérez, Francisco M.
  • Furlan, Walter D.
[EN] In this work, we present a comparative analysis of different numerical methods to obtain the focusing properties of the zone plates based on Fibonacci and Cantor sequences. The Fresnel approximation was solved numerically in order to obtain the axial irradiance provided by these diffractive lenses. Two different methods were applied. The first one is based on numerical integration, specifically the Simpson integration method and the two-dimensional Gaussian quadrature. The second consisted in the implementation of the Fast Fourier Transform in both one and two dimensions. The axial irradiance of the lenses, the relative error with respect to the analytical solution, and the calculation time required by each method are analyzed and compared. From this analysis it was concluded that the Gauss method presents the best balance between accuracy and computation time. This analysis could be useful to decide the most convenient numerical method to be used for the study of more complex diffractive structures., This work was supported by the Ministerio de Ciencia e Innovacion de Espana (grant PID2019-107391RB-I00) and by Generalitat Valenciana (grant PROMETEO/2019/048), Spain. A.G.M. and F.M.M.P. acknowledge the financial support from the Generalitat Valenciana (GRISOLIAP/2021/121) and from the Universitat Politècnica de València (PAID-01-20-25), respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Three-Dimensional Refractivity Model for Atmospheric Mitigation in Distance and Vertical Angle Measurements

  • Luján, Raquel
  • García-Asenjo Villamayor, Luis|||0000-0001-6535-2216
  • Baselga Moreno, Sergio|||0000-0002-0492-4003
[EN] Atmospheric refraction is a significant challenge to accurate distance and angle measurements in open-air environments, often limiting the precision of measurements obtained using electro-optic geodetic instruments despite their nominal accuracies. This study introduces a novel model, 3D-RM, designed to mitigate atmospheric effects on both distance and vertical angle measurements. The 3D-RM integrates in situ meteorological data from a network of automatic data-loggers, terrain information from a digital terrain model (DTM), and sensible heat flux from the fifth generation of European Centre for Medium-Range Weather Forecast reanalysis (ERA5), which is used in the application of the Turbulence Transfer Model (TTM) for estimating vertical refractivity gradients at various height levels. The model was tested with total station observations to 10 target points during two field campaigns. The results show that applying the model for distance correction leads to improvements in terms of closeness to reference values when compared to the standard method, which relies only on meteorological data collected at the station. Furthermore, the model has been additionally tested by removing the station meteorological data (3D-RM2). The results demonstrate that accurate corrections can be obtained even without the need of meteorological sensors specifically installed at the station point, which makes it more flexible. The 3D-RM is a cost-effective and relatively easy-to-implement solution, offering a promising alternative to existing methodologies, such as measuring meteorological values at both station and target points or the development of new instruments that can compensate the refractivity (such as a multiple-color electronic distance meter)., The research contract of Raquel Lujan was funded by the Programa de Ayudas de Investigacion y Desarrollo (PAID-01-20) de la Universitat Politecnica de Valencia. This work was partially funded by the project Development of High-Precision GNSS Techniques for Dimensional Metrology, Deformation Monitoring, and Geodetic Networks for Civil Engineering Projects (GNSS-Metrology), ref. PID2022-142363NB-I00, Plan Estatal de Investigacion Cientifica y Tecnica y de Innovacion 2021-2023, MCIN/AEI/10.13039/501100011033/FEDER, UE.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis doctoral (DoctoralThesis)

Reproductive biology of several halophytes from the Natural Park of Albufera with interest in conservation programs

  • Mircea, Diana Maria|||0000-0002-9747-7272
[ES] El cambio climático representa uno de los principales problemas medioambientales del siglo XXI, ya que está provocando un aumento de la temperatura en todo el mundo, la subida del nivel del mar y la salinización del suelo. En los ecosistemas costeros del Mediterráneo, tan ricos en biodiversidad como altamente vulnerables, estos cambios suponen una amenaza para las comunidades vegetales autóctonas, especialmente las halófitas (plantas que se adaptan de forma natural a condiciones salinas) y que desempeñan funciones ecológicas y protectoras muy importantes. Conocer sus respuestas fisiológicas y reproductivas a la salinidad es vital tanto para preservar la biodiversidad como para desarrollar enfoques de gestión sostenible de entornos degradados. Esta tesis doctoral investiga la biología reproductiva y los mecanismos adaptativos de cuatro especies halófitas del litoral valenciano: Linum maritimum L., Kosteletzkya pentacarpos (L.) Ledeb., Limonium irtaense P.P. Ferrer et al., y Cakile maritima Scop. El estudio utiliza experimentos controlados en invernadero junto con análisis fisiológicos, bioquímicos y metabolómicos para determinar los umbrales de tolerancia, las estrategias de adaptación y la importancia de la conservación en condiciones de estrés salino que reflejan los escenarios climáticos futuros previstos. Los resultados revelan respuestas específicas de cada especie en consonancia con sus antecedentes ecológicos. Los resultados revelan respuestas específicas de las especies que se alinean con sus antecedentes ecológicos. L. maritimum, una especie de lino costero vulnerable, muestra tolerancia a la salinidad baja (≤100 mM NaCl) mediante la absorción selectiva de K⁺ y la activación de antioxidantes, pero experimenta una supresión significativa tanto en la reproducción como en la supervivencia cuando se expone a salinidad alta durante periodos prolongados. K. pentacarpos, categorizada como halófita facultativa, emplea un enfoque adaptativo multifacético que incluye el ajuste osmótico a través de prolina y glicina betaína, el mantenimiento del equilibrio iónico y la activación de vías antioxidantes y metabólicas, que ha sido apoyado por su primera caracterización metabolómica, destacando sus potenciales aplicaciones en fitorremediación y agricultura salina. La especie endémica del este ibérico L. irtaense muestra tolerancia a 200 mM de NaCl, asegurada por la regulación osmótica y la estabilidad redox; sin embargo, los niveles de marcadores de estrés oxidativo se elevan por encima de esta concentración, definiendo así su umbral de tolerancia. Por último, C. maritima consigue florecer y producir frutos de forma consistente en condiciones de salinidad moderada, demostrando una estrategia reproductiva bien adaptada a las condiciones dinámicas de los ambientes costeros. En conjunto, estos resultados proporcionan una visión global de cómo las halófitas mediterráneas integran la regulación iónica, el equilibrio osmótico, los mecanismos de defensa antioxidante y la adaptabilidad metabólica para prosperar en hábitats salinos. La investigación pone de relieve la mayor vulnerabilidad de las etapas reproductivas al estrés e indica que la exposición previa a niveles intermedios de salinidad puede servir como cebado fisiológico, mejorando la resiliencia futura. Además de contribuir al avance de los conocimientos básicos sobre las adaptaciones de las plantas a la salinidad, la tesis contribuye directamente a la biología de la conservación y ofrece ideas prácticas para reforzar las poblaciones de plantas amenazadas y rehabilitar la vegetación costera. A medida que los procesos de salinización se intensifican debido al cambio climático global, este tipo de estudios resultan esenciales para preservar la biodiversidad y promover el uso sostenible de las halófitas en innovaciones ecológicas y agrícolas., Diana-Maria Mircea is a recipient of the predoctoral contract “Contratos Predoctorales para la Formación de Doctores Dentro del Programa Propio de la Universitat Politècnica De València (FPI-UPV) - Subprograma 1 (Paid-01-20)”
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Reconfigurable Activation Functions in Integrated Optical Neural Networks

  • Rausell-Campo, Jose Roberto|||0000-0002-6710-4766
  • Pérez-López, Daniel
[EN] The implementation of nonlinear activation functions is one of the key challenges that optical neural networks face. To the date, different approaches have been proposed, including switching to digital implementations, electro-optical or all optical. In this article, we compare the response of different electro-optic architectures where part of the input optical signal is converted into the electrical domain and used to self-phase modulate the intensity of the remaining optical signal. These architectures are made up of Mach Zehnder Interferometers (MZI) and microring resonators (MRR). We have compared the corresponding transfer functions with commonly used activation functions in state-of-the-art machine learning models and carried out an in-depth analysis of the capabilities of those architectures to generate the proposed activation functions. We demonstrate that a ring assisted MZI and a two-ring assisted MZI present the highest expressivity among the proposed structures. To the best of our knowledge, this is the first time that a quantified analysis of the capabilities of optical devices to mimic state-of-the-art activation functions is presented. The obtained activation functions are benchmarked on two machine learning examples: classification task using the Iris dataset, and image recognition using the MNIST dataset. We use complex-valued feed-forward neural networks and get test accuracies of 97% and 95% respectively., This work was supported in part by FPI-UPV Grant Program under Grant PAID-01-20-24 from the Universitat Politecnica de Valencia, through the Spanish MINECO Juan de la Cierva Program and in part by the H2020-ICT2019-2 Neoteric 871330 Project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Multi-trap optical tweezers based on kinoform Silver Mean lenses

  • Muñoz-Pérez, Francisco M.
  • Furlan, Walter D.
  • Garmendía-Martínez, Adrián|||0000-0003-3443-5144
  • Ferrando, Vicente|||0000-0002-7434-7109
  • Castro-Palacio, Juan Carlos|||0000-0002-0132-9989
  • Monsoriu Serra, Juan Antonio|||0000-0003-3350-7951
[EN] In this paper, we present the design and implementation of multi-trap optical tweezers based on new quadrifocal kinoform lenses. The phase distribution of these diffractive lenses is characterized by the Silver Mean sequence. The focusing properties of the resulting aperiodic DOEs coined Kinoform Silver Mean Lenses (KSMLs) are numerically examined. It is shown that, under monochromatic illumination, a KSML drives most of the incoming light into four single foci whose focal lengths are related to the Silver ratio. In this way, a KSML improves the diffraction efficiency of binary Fresnel Silver Mean Zone Plates. Through experimental results, the simultaneous trapping of particles in the four focal planes and their three-dimensional manipulation is demonstrated., This work was supported by the Spanish Ministerio de Ciencia e Innovación (grant PID2022-142407NB-I00) and by Generalitat Valenciana (grant CIPROM/2022/30), Spain. F.M.M.P. and A.G.M. acknowledge the financial support from the Universitat Politècnica de València (PAID-01-20-25) and from the Generalitat Valenciana (GRISOLIAP/2021/121), respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

EDM-GNSS distance comparison at the EURO5000 calibration baseline: preliminary results

  • Wezka, Kinga
  • Próchniewicz, Dominik
  • Szpunar, Ryszard
  • Garrigues Talens, Pascual
  • Walo, Janusz
  • Luján, Raquel
  • García-Asenjo Villamayor, Luis|||0000-0001-6535-2216
  • Baselga Moreno, Sergio|||0000-0002-0492-4003
[EN] At the Pieniny Klippen Belt in Poland, the novel primary reference baseline EURO5000 is required as part of the European Research project GeoMetre to both validate refractivity-compensated EDM prototypes and investigate the metrological traceability of GNSS-based distances. Since the aimed uncertainty is 1 mm at 5 km (k = 2), the design, construction, and validation must be carefully prepared to fulfil the high standards of the GeoMetre field campaigns which are planned to be carried out in May 2022. This contribution describes the main features of the EURO5000 and presents the results of the preliminary validation which includes a first comparison between the results obtained by using precise currently available EDMs as well as GNSS techniques following the standard GNSS geodetic processing algorithms, on the one hand, and the improved GNSS-Based Distance Meter (GBDM+) approach developed at UPV, on the other hand. The preliminary validation presented in this contribution also permits (1) to detect potential problems in the use of the baseline such as potential geodynamic problems, atmospheric refraction or multipath limitations, (2) to produce a set of reliable results, and (3) to pave the way for the final field comparisons between the novel EDMs and the GBDM+ approach. The result of this metrological experiment may significantly contribute to overcome the limitations of current high-precision deformation monitoring applications that require their scale to be consistent with the SI-metre within 0.1 ppm in several km., The project 18SIB01 GeoMetre hasreceived funding from the EMPIR programme co-financedby the Participating States and from the European Union's Horizon 2020 research and innovation programme, funderID: 10.13039/100014132. Raquel Lujan acknowledges the funding from the Programa de Ayudas de Investigaciony Desarrollo (PAID-01-20) de la Universitat Politecnica deValencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Experimental aerothermal characterization of surface air-cooled oil coolers for turbofan engines

  • Broatch, A.|||0000-0001-9991-1039
  • Olmeda, P.|||0000-0002-3161-0165
  • García-Tíscar, Jorge|||0000-0003-4934-4587
  • Felgueroso-Rodríguez, Andrés
  • Chávez-Modena, M.
  • González, L. M.
  • Gelain, M.
  • Couilleaux, A.
[EN] Thermal management is a major challenge for new generation turbofan aero-engines. One of the most promising heat exchangers are the so-called surface air-cooled oil coolers (SACOCs). In this study, an experimental methodology is proposed and implemented in order to characterize SACOCs mounted in turbofan bypass ducts. Three different SACOC geometries have been characterized under the same nominal operating point, while the actual velocity profile in the bypass was reproduced by means of a distortion screen upstream the test section. The heat exchangers were mounted in counterflow configuration and feature the same fin geometry in the oil side. The three prototypes varied only in the air side, being the first a baseline flat plate, the second a SACOC with standard trapezoidal fins and the third featuring optimized fins designed to reduce the pressure drop. Aerothermal results demonstrated that the effect of the SACOC on the bypass flow was confined to a region about the same height and width of the finned area, avoiding the need of reproducing the whole bypass duct. However, for this reduced-height experimental approach to be valid, we show that the velocity profile needs to be rearranged to match the specific section of the whole bypass. We also demonstrate how the optimized fin geometry achieved a 10% lower friction factor than the standard one at nominal flow conditions while increasing the overall heat transfer coefficient by 5.2%., This project has received funding from the Clean Sky 2 Joint Undertaking under the European Union's Horizon 2020 research and innovation programme under grant agreement n° 831977: Aerodynamic upgrade of Surface Air-Cooled Oil Coolers (SACOC). A. Felgueroso is supported through the Programa de Apoyo para la Investigación y Desarrollo of the Universitat Politècnica de València under grant PAID-01-20 n° 21589. The authors also wish to thank Safran Aircraft Engines for their kind permission to share the data presented in this publication. Special thanks are also given to Mr. Adolfo Guzmán for his inestimable support during the experimental campaign.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Design, establishment, analysis and quality control of a high-precision reference frame in Cortes de Pallás (Spain)

  • García-Asenjo Villamayor, Luis|||0000-0001-6535-2216
  • Baselga Moreno, Sergio|||0000-0002-0492-4003
  • Martínez, Laura
  • Garrigues, Pascual
  • Luján, Raquel
[EN] A high-precision geodetic reference frame was required in Cortes de Pallás (Spain) to undertake a long-term deformation monitoring project.  Involving distances up to 2000 m, the aimed accuracy was 1 mm and 3 mm for horizontal and vertical components, respectively. Such a high precision is necessary to detect possible displacements of selected points on a critical rocky area in a short period of time, i.e. two or three years, and also to provide ground control for the integration of precise 3D models periodically obtained by remote sensing techniques. Considering the historical geotechnical problems of the area, the possible influence of the hydroelectric power plant, and the peculiar orography of the zone, a proper analysis of the stability is crucial if the reference frame is to be used for rigorous over-time deformation monitoring. This paper describes the deformation monitoring of a 10-pillar geodetic network which was measured from 2018 to 2020 by using a sub-millimetric Mekometer ME5000 (0.2 mm + 0.2 ppm) along with a demanding observing methodology which includes a network of data loggers for temperature, humidity and air pressure as well as proper calibration of sensors and instruments to prevent potential inconsistencies between the scale of the network and the unit of length of the International System (SI-metre). The results demonstrated that the chosen methodology yielded the aimed accuracy. However, using such a high precision methodology entails the problem that small displacements of only one or two millimeters are significantly detected as deformations by conventional deformation analysis and then it arises the problem of finding a subset of stable points for a rigorous datum realization when all the points seem to displace. This general problem is analyzed in the particular case of Cortes de Pallás, where a balanced mix of deformation analysis and technical decisions was eventually adopted to define a precise and stable reference frame for rigorous over-time deformation monitoring., This work has been carried out under the contract T-726 – Control de deformaciones en la ladera norte de la muela de Cortes de Pallás commissioned by the Diputació de València. The authors are grateful to the UCM which granted the use of its ME5000 Mekometer through a co-operation agreement, to José María Grima for his support to calibrate the ME5000 Mekometer, thermometers, and barometers at the Calibration Laboratory of the UPV. We also acknowledge IGS for their efforts to disseminate products available to the global community, and EURAMET for their contribution to the research efforts on the field of large-scale length metrology for geodesy. The UPV team acknowledge the Programa de Ayudas de Investigación y Desarrollo (PAID-01-20) de la Universitat Politècnica de València for funding the research contract of Raquel Luján
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Experimental and numerical methodology for the aero-thermal analysis of a SACOC heat exchanger

  • Chávez-Modena, Miguel
  • Miguel González, Leo
  • Valero, Eusebio
  • Felgueroso, Andrés
  • Broatch, A.|||0000-0001-9991-1039
  • García-Tíscar, Jorge|||0000-0003-4934-4587
[EN] Surface air-cooled oil coolers (SACOC) are being used in the aerospace industry. This device is a passive heat exchanger used to dissipate a large amount of heat from the oil circuit of a turbofan engine to its secondary flow with minimal impact on turbofan efficiency. Typically, heat exchangers are formed by parallel fins and it is important to evaluate the interaction between the three-dimensional high-speed flow and the heat exchanger. The characterization of these devices is usually performed in custom wind tunnels. In addition, it can be done through numerical simulations that include the solution of the fluid equations in the flow field and a conjugate thermal problem. The benefit of using numerical methods, once validated, is that it allows a complete and computationally affordable analysis of the aerothermal performance of the SACOC. This work includes a comparison between numerical and experimental results in terms of pressures and temperatures to achieve a complete characterization, thus demonstrating the capability of the numerical model to obtain accurate results and allowing a better understanding of the physical phenomenon., This project has received funding from Clean Sky 2 Joint Undertaking under the European Union s Horizon 2020 research and innovation programme under grant agreement No 831977 Aerodynamic upgrade of Surface Air-Cooled Oil Coolers (SACOC). Leo M. González acknowledges the financial support from the Spanish Ministry of Science, Innovation and Universities (MCIU) under grant RTI2018-096791-BC21 Hidrodinámica de elementos de amortiguamiento del movimiento de aerogeneradores flotantes. A. Felgueroso is supported through the Programa de Apoyo para la Investigación &#119910; Desarrollo of the Universitat Politècnica de València under grant PAID-01-20 n&#9702; 21589.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Exploiting neural networks Bit-level redundancy to mitigate the impact of faults at inference

  • Catalán-Gallach, Izan|||0000-0001-7993-433X
  • Flich Cardo, José
  • Hernández Luz, Carles|||0000-0003-1192-6223
[EN] Neural networks are widely used in critical environments such as healthcare, autonomous vehicles, or video surveillance. To ensure the safety of the systems that rely on their functionality, it is essential to validate their correct behaviour in the presence of faults. This paper studies the behaviour of state-of-the-art neural network models with fault injection in their weights. For this purpose, we analyse the sensitivity of these models and identify the impact of bit flips on their accuracy. To mitigate the effects of faults, we introduce two mechanisms that leverage bit-level redundancy for protection. The first mechanism, Fixed Protection, safeguards consecutive sets of bits, while the second, Variable Protection, targets non-consecutive bits. Our findings demonstrate that, on average, random bit flip faults cause the accuracy of the original models to drop by 1.3% to over 3%. However, with our protection mechanisms in place, accuracy reductions are significantly minimised, ranging from only 0.0001% to 0.4%., This article has been made possible thanks to the Grant "BECA FPU PROGRAMA PROPIO DE LA UNIVERSITAT POLITECNICA DE VALENCIA - SUBPROGRAMA 1 (PAID-01-20)" No. 20210037. Carles Hernandez is partially supported by the Spanish Ministry of Science, Innovation and Universities under "Ramon y Cajal", fellowship No. RYC2020-030685-I. In addition, this work has received funding from the Valencian government project "IFAC: Implementing Fault-Tolerant Autonomous Computers (CISEJI/2022/30)", and from the Chips Joint Undertaking project EdgeAITrust no. 101139892 and the Spanish Agencia Estatal de Investigacion PCI2024-155056-2 grant. Funding for open access charge: CRUE-Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Introducing memory to a family of multi-step multidimensional iterative methods with weight function

  • Cordero Barbero, Alicia|||0000-0002-7462-9173
  • Torregrosa Sánchez, Juan Ramón|||0000-0002-9893-0761
  • Triguero-Navarro, Paula|||0000-0002-7319-9992
  • Villalba, Eva G.
[EN] In this paper, we construct a derivative-free multi-step iterative scheme based on Steffensen's method. To avoid excessively increasing the number of functional evaluations and, at the same time, to increase the order of convergence, we freeze the divided differences used from the second step and use a weight function on already evaluated operators. Therefore, we define a family of multi-step methods with convergence order 2m, where m is the number of steps, free of derivatives, with several parameters and with dynamic behaviour, in some cases, similar to Steffensen's method. In addition, we study how to increase the convergence order of the defined family by introducing memory in two different ways: using the usual divided differences and the Kurchatov divided differences. We perform some numerical experiments to see the behaviour of the proposed family and suggest different weight functions to visualize with dynamical planes in some cases the dynamical behaviour., This research was partially supported by Universitat Politècnica de València Contrato Predoctoral, Spain PAID-01-20-17 (UPV) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Development and Characterization of Polylactide Blends with Improved Toughness by Reactive Extrusion with Lactic Acid Oligomers

  • Tejada-Oliveros, Ramón
  • Fiori, Stefano
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Lascano-Aimacaña, Diego Sebastián|||0000-0002-0996-1946
  • Montanes, Nestor|||0000-0001-6070-127X
  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
  • Garcia-Sanoguera, David|||0000-0002-1923-9519
This research is a part of the grant PID2020-116496RB-C22 funded by MCIN/AEI/10.13039/ 501100011033, and the grant number AICO/2021/025 funded by Generalitat Valenciana-GVA. R.T.-O. wishes to thank UPV for the grant received though the PAID-01-20 program. J.G.-C. wishes to thank grant FPU20/01732 funded by MCIN/AEI/ 10.13039/501100011033 and by ESF Investing in your future. Microscopy Services at UPV are also acknowledged for their help in collecting and analysing images.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Development and characterization of high environmental performance composites of Bio-PBSA and short hemp fibers from different compatibilization strategies, Desarrollo y caracterización de compuestos de alto rendimiento medioambiental de Bio-PBSA y fibras cortas de cáñamo a partir de diferentes estrategias de compatibilización

  • Tejada-Oliveros, Ramón
  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
  • Garcia-Sanoguera, David|||0000-0002-1923-9519
  • Montanes, Nestor|||0000-0001-6070-127X
  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
[EN] In this research work, the effect of various compatibilizing agents on naturally sourced composites formed from poly(butylene succinate-co-adipate) - PBSA and short hemp fibers has been analyzed. Hemp has been employed as a natural reinforcement to obtain environmentally friendly composites, using biobased PBSA as a matrix. These composites were obtained from twin-screw extrusion and shaped by injection molding. To improve the poor compatibility between the matrix and lignocellulosic fibers, different compatibilizing agents were used, including a maleic anhydride graft copolymer (PBSA-g-MA), a copolymer based on itaconic acid (PBSA-g-IA) and dibutyl itaconate (DBI). The addition of these compatibilizers provided different levels of improvement with respect to the PBSA/hemp base compound. In relation to the mechanical properties, the addition of the copolymers significantly increased the maximum tensile stress, with values around 20 MPa, with respect to the 8,86 MPa of the PBSA/hemp uncompatibilized composite. The addition of DBI to the base blend led to an improvement in the elongation at break of 82% (3,51% elongation at break of the base blend versus 6,40% with the addition of DBI). These results are in agreement with those obtained in dynamic mechanical thermal analysis (DMTA), where the incorporation of hemp fibers and the combination of the different compatibilizers resulted in an improvement in stiffness over the entire temperature range., Los autores agradecen la financiación otorgada gracias al proyecto con número de subvención PID2020-116496RB-C22 financiado por el Ministerio de Ciencia e Innovación MCIN/AEI/10.13039/501100011033 y número de subvención AICO/2021/025 financiado por la Generalitat Valenciana. R. T.-O. quiere agradecer a la UPV la subvención recibida a través del programa PAID-01-20. J. I.-M. quiere agradecer la beca FPU19/01759 financiada por MCIN/AEI/10.13039/501100011033 y por el FSE Invierte en tu futuro.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Integrated Microwave Photonics Coherent Processor for Massive-MIMO Systems in Wireless Communications

  • Martínez-Carrasco-Romero, Pablo|||0000-0003-3771-590X
  • Rausell-Campo, Jose Roberto|||0000-0002-6710-4766
  • Pérez-Galacho, Diego
  • Li, Xu
  • Qing, Ting
  • Pérez-López, Daniel
  • Wang, Tiangxiang
[EN] Massive-MIMO systems can achieve high capacities and data rates by increasing the number of operational antennas in the base station. As more antenna elements are introduced, the complexity of the signal processing operations increases accordingly and current electronic processors struggle to reach those requirements. To overcome these hurdles, we propose a novel theory to process the RF signals in the optical domain. We experimentally demonstrate the capabilities of theory using a non-integrated Dual Parallel Modulator as a 2×2 optical matrix multiplier, recovering satisfactorily previously mixed RF signals modulated following the standards in 5G communications. Finally, we propose an integrated photonic architecture based on a core of Mach Zehnder Interferometers to physically process the information. Together with the optical core, we proposed the integration of RF modulators, microwave photonic filters and high-speed photodetectors.We present simulations on the expected performance of the circuit and analyze the impact of fabrication errors., The work of Jose Roberto Rausell-Campo was supported by the Polythecnic University of Valencia through FPI-UPV Program under Grant PAID-01-20-24. This work was supported by the UPV-Huawei Wireless Joint Innovation Center Agreement under Project YBN2020095120.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of BoNT/A in the Surface Electromyographic Characteristics of the Pelvic Floor Muscles for the Treatment of Chronic Pelvic Pain

  • Albaladejo-Belmonte, Mónica
  • Nohales-Alfonso, Francisco J.
  • Tarazona-Motes, Marta
  • De-Arriba, Maria
  • Alberola-Rubio, José
  • Garcia-Casado, Javier|||0000-0003-1410-2721
[EN] Chronic pelvic pain (CPP) is a complex condition with a high economic and social burden. Although it is usually treated with botulinum neurotoxin type A (BoNT/A) injected into the pelvic floor muscles (PFM), its effect on their electrophysiological condition is unknown. In this study, 24 CPP patients were treated with BoNT/A. Surface electromyographic signals (sEMG) were recorded at Weeks 0 (infiltration), 8, 12 and 24 from the infiltrated, non-infiltrated, upper and lower PFM. The sEMG of 24 healthy women was also recorded for comparison. Four parameters were computed: root mean square (RMS), median frequency (MDF), Dimitrov¿s index (DI) and sample entropy (SampEn). An index of pelvic electrophysiological impairment (IPEI) was also defined with respect to the healthy condition. Before treatment, the CPP and healthy parameters of almost all PFM sides were significantly different. Post-treatment, there was a significant reduction in power (<RMS), a shift towards higher frequencies (>MDF), lower fatigue index (<DI) and increased information complexity (>SampEn) in all sites in patients, mainly during PFM contractions, which brought their electrophysiological condition closer to that of healthy women (<IPEI). sEMG can be used to assess the PFM electrophysiological condition of CPP patients and the effects of therapies such as BoNT/A infiltration., This study was funded by Universitat Politecnica de Valencia in Programa de Ayudas de Investigacion y Desarrollo (PAID-01-20), ISCIII, MCIU, VLC Campus in Convocatoria Ayudas: UPV-La Fe (INBIO): 2016 SPEHG (ID:C18), 2019 sEMG_BONTAv (ID:C06) and funds from private contracts with Merz Pharmaceuticals GmbH S.L.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Dynamic evolution of transient receptor potential vanilloid (TRPV) ion channel family with numerous gene duplications and losses

  • MORINI, MARINA
  • Bergqvist, Christina A.
  • Larhammar, Dan
  • Dufour, Sylvie
  • Asturiano, Juan F.|||0000-0002-6441-5294
[EN] The transient receptor potential vanilloid (TRPV) ion channel family is involved in multiple sensory and physiological functions including thermosensing and temperature-dependent neuroendocrine regulation. The objective of the present study was to investigate the number, origin and evolution of TRPV genes in metazoans, with special focus on the impact of the vertebrate whole-genome duplications (WGD). Gene searches followed by phylogenetic and synteny analyses revealed multiple previously undescribed TRPV genes. The common ancestor of Cnidaria and Bilateria had three TRPV genes that became four in the deuterostome ancestor. Two of these were lost in the vertebrate ancestor. The remaining two genes gave rise to two TRPV subfamilies in vertebrates, consisting of subtypes 1, 2, 3, 4, 9 and 5, 6, 7, 8, respectively. This gene expansion resulted from the two basal vertebrate WGD events (1R and 2R) and three local duplications before the radiation of gnathostomes. TRPV1, 4 and 5 have been retained in all gnathostomes investigated, presumably reflecting important functions. TRPV7 and 8 have been lost independently in various lineages but are still retained in cyclostomes, actinistians (coelacanth), amphibians, prototherians and basal actinopterygians (Polypteridae). TRPV3 and 9 are present in extant elasmobranchs, while TRPV9 was lost in the osteichthyan ancestor and TRPV3 in the actinopterygian ancestor. The coelacanth has retained the ancestral osteichthyan repertoire of TRPV1, 3, 4, 5, 7 and 8. TRPV2 arose in the tetrapod ancestor. Duplications of TRPV5 occurred independently in various lineages, such as cyclostomes, chondrichthyans, anuran amphibians, sauropsids, mammals (where the duplicate is called TRPV6), and actinopterygians (Polypteridae and Esocidae). After the teleost-specific WGD (3R) only TRPV1 retained its duplicate, whereas TRPV4 and 5 remained as single genes. Both 3R-paralogs of TRPV1 were kept in some teleost species, while one paralog was lost in others. The salmonid-specific WGD (4R) duplicated TRPV1, 4, and 5 leading to six TRPV genes. The largest number was found in Xenopus tropicalis with no less than 15 TRPV genes. This study provides a comprehensive evolutionary scenario for the vertebrate TRPV family, revealing additional TRPV types and proposing a phylogeny-based classification of TRPV across metazoans., MM is a recipient of France-Spain bilateral postdoctoral fellowship APOSTD (APOSTD/2020/053) from the Generalitat Valenciana and the European community. JA has funding from Spanish MICIU (Project EELGONIA; RTI2018-096413-B-I00). DL has funding from the Swedish Research Council and the Swedish Brain Foundation. SD has funding from MNHN and CNRS.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis doctoral (DoctoralThesis)

Study of the Reactive Behavior of SI Engine Aftertreatment Systems Powered by Gaseous Fuels

  • Conde-Pabón, Brayan Yessid
[ES] Históricamente, ha predominado una fuerte dependencia de las fuentes no renovables, especialmente los combustibles fósiles, esenciales para el desarrollo de todos los sectores debido a su versatilidad como fuente de energía para máquinas y procesos industriales. Sin embargo, su uso intensivo y prolongado ha generado graves impactos ambientales y riesgos significativos para la salud pública, impulsados por el crecimiento poblacional, el aumento de la demanda energética y las emisiones contaminantes derivadas de su combustión. Estos problemas han llevado a la implementación de regulaciones que limitan las emisiones contaminantes de los sectores industriales. En particular, se han establecido normativas para regular las emisiones del sector transporte, como CO, CO2, UHC, CH4, NOX, NH3, N2O y PM, ya que numerosas investigaciones científicas han relacionado estas emisiones con problemas de salud y el deterioro ambiental. En respuesta, el sector transporte ha implementado estrategias para cumplir con los límites establecidos, adoptando motores eléctricos, pilas de combustible y sistemas híbridos, sin descartar los motores de combustión interna, los cuales continúan siendo objeto de numerosas investigaciones para optimizar su eficiencia y utilizar combustibles alternativos con bajo o nulo contenido de carbono. En este contexto, los combustibles gaseosos, como el NG y el LPG, han ganado protagonismo en los últimos años, especialmente en aplicaciones de servicio mediano y pesado donde otros sistemas y combustibles no pueden satisfacer la demanda a corto y mediano plazo. Estas alternativas ofrecen ventajas significativas frente a los combustibles tradicionales como la gasolina y el diésel, destacándose por su menor impacto ambiental. No obstante, debido a que las normativas sobre emisiones contaminantes son y seguirán siendo sumamente estrictas, el uso de ATS es y seguirá siendo imprescindible para mitigar las sustancias contaminantes antes de que sean liberadas al medio ambiente. Por esta razón, resulta fundamental llevar a cabo investigaciones que permitan comprender el comportamiento reactivo de los ATS en motores de combustión interna alimentados con combustibles gaseosos para suplir la demanda energética de manera más sostenible. Con base en lo anterior, el objetivo de esta tesis fue estudiar el comportamiento reactivo de los ATS utilizados en motores alimentados por combustibles gaseosos, específicamente LPG. Para ello, se evaluaron dos motores operando con LPG en un banco de pruebas, lo que permitió analizar tanto las emisiones crudas como el desempeño de diversos dispositivos ATS (PCAT, TWC, PF, AOC y CPF) en condiciones de operación estable y transitoria, a partir de los estándares establecidos por la normativa Euro VI. Además, se emplearon dos bancos de gases sintéticos para caracterizar el comportamiento reactivo de un TWC a través de pruebas de light-off, OSC y condiciones transitorias. Estos experimentos facilitaron la calibración y validación de un modelo computacional del TWC, proporcionando una comprensión detallada de los fenómenos fisicoquímicos que ocurren en este catalizador. Entre los hallazgos más relevantes del trabajo destaca la alta efectividad del TWC en condiciones ligeramente ricas para la conversión simultánea de CO, UHC y NOX. Sin embargo, estas condiciones presentan el inconveniente de favorecer la formación de NH3 en el TWC, un fenómeno que puede mitigarse mediante la aplicación de pulsos que alternan la composición del escape entre fases ricas y pobres. La formación de N2O y NH3 estuvo fuertemente influenciada por la temperatura, así como por la presencia de H2O y H2 en el gas de escape, lo que sugiere que durante el arranque en frío del motor ambas especies pueden generar problemas significativos. Esto hace indispensable el uso de dispositivos como el PCAT y el CPF, los cuales mejoran el desempeño ambiental del motor al reducir estas especies contaminantes., [CA] Històricament, ha predominat una forta dependència de les fonts no renovables, especialment els combustibles fòssils, essencials per al desenrotllament de tots els sectors a causa de la seua versatilitat com a font d'energia per a màquines i processos industrials. No obstant això, el seu ús intensiu i prolongat ha generat greus impactes ambientals i riscos significatius per a la salut pública, impulsats pel creixement poblacional, l'augment de la demanda energètica i les emissions contaminants derivades de la seua combustió. Estos problemes han portat a la implementació de regulacions que limiten les emissions contaminants dels sectors industrials. En particular, s'han establit normatives per a regular les emissions del sector transporte, CO, CO2, UHC, CH4, NOX, NH3, N2O i material PM, ja que nombroses investigacions científiques han relacionat estes emissions amb problemes de salut i la deterioració ambiental. En resposta, el sector transporte ha implementat estratègies per a complir amb els límits establits, adoptant motors elèctrics, piles de combustible i sistemes híbrids, sense descartar els motors de combustió interna, els quals continuen sent objecte de nombroses investigacions per a optimitzar la seua eficiència i utilitzar combustibles alternatius amb baix o nul contingut de carboni. En este context, els combustibles gasosos, com el NG i el LPG, han guanyat protagonisme en els últims anys, especialment en aplicacions de servici mitjà i pesat on altres sistemes i combustibles no poden satisfer la demanda a curt i mitjà termini. Estes alternatives oferixen avantatges significatius enfront dels combustibles tradicionals com la gasolina i el dièsel, destacant-se pel seu menor impacte ambiental. No obstant això, pel fet que les normatives sobre emissions contaminants són i continuaran sent summament estrictes, l'ús de ATS és i continuarà sent imprescindible per a mitigar les substàncies contaminants abans que siguen alliberades al medi ambient. Per esta raó, resulta fonamental dur a terme investigacions que permeten comprendre el comportament reactiu dels ATS en motors de combustió interna alimentats amb combustibles gasosos per a suplir la demanda energètica de manera més sostenible. Amb base en l'anterior, l'objectiu d'esta tesi va ser estudiar el comportament reactiu dels ATS utilitzats en motors alimentats per combustibles gasosos, específicament LPG. Per a això, es van avaluar dos motors operant amb LPG en un banc de proves, la qual cosa va permetre analitzar tant les emissions crues com l'acompliment de diversos dispositius ATS (PCAT, TWC, PF, AOC i CPF) en condicions d'operació estable i transitòria, a partir dels estàndards establits per la normativa Euro VI. A més, es van emprar dos bancs de gasos sintètics per a caracteritzar el comportament reactiu d'un TWC a través de proves de light-off, OSC i condicions transitòries. Estos experiments van facilitar el calibratge i validació d'un model computacional del TWC, proporcionant una comprensió detallada dels fenòmens fisicoquímics que ocorren en este catalitzador. Entre les troballes més rellevants del treball destaca l'alta efectivitat del TWC en condicions lleugerament riques per a la conversió simultània de CO, UHC i NOX. No obstant això, estes condicions presenten l'inconvenient d'afavorir la formació de NH3 en el TWC, un fenomen que pot mitigar-se mitjançant l'aplicació de polsos que alternen la composició de la fuita entre fases riques i pobres. La formació de N2O i NH3 va estar fortament influenciada per la temperatura, així com per la presència d'H¿O i H2 en el gas de fuita, la qual cosa suggerix que durant l'arrancada en fred del motor totes dues espècies poden generar problemes significatius. Això fa indispensable l'ús de dispositius com el PCAT i el CPF, els quals milloren l'acompliment ambiental del motor en reduir estes espècies contaminants., [EN] Historically, there has been a strong dependence on non-renewable sources, particularly fossil fuels, which are essential for developing all sectors due to their versatility as energy sources for machinery and industrial processes. However, their intensive and prolonged use has led to severe environmental impacts and significant public health risks, driven by population growth, increased energy demand, and pollutant emissions resulting from their combustion. These problems have prompted the implementation of regulations to limit pollutant emissions from industrial sectors. In particular, standards have been established to regulate emissions from the transportation sector, including CO, CO2, UHC, CH4, NOX, NH3, N2O, and PM, as numerous scientific studies have linked these emissions to health issues and environmental degradation. In response, the transportation sector has implemented strategies to comply with the established limits by adopting electric engines, fuel cells, and hybrid systems while continuing to focus on internal combustion engines, which remain the subject of extensive research aimed at optimizing their efficiency and using alternative fuels with low or zero carbon content. In this context, gaseous fuels, such as NG and LPG, have gained prominence in recent years, especially in medium- and heavy-duty applications where other systems and fuels cannot meet the demand in the short to medium term. These alternatives offer significant advantages over traditional fuels such as gasoline and diesel, particularly for their lower environmental impact. However, because emission standards are and will continue to be extremely stringent, using ATS remains essential to mitigate pollutants before they are released into the environment. For this reason, it is crucial to conduct studies that help understand the reactive behavior of ATS in internal combustion engines fueled by gaseous fuels to meet energy demand more sustainably. Based on the above, this thesis aimed to study the reactive behavior of ATS used in engines fueled by gaseous fuels, specifically LPG. To this end, two LPG-powered engines were evaluated on an engine test bench, which enabled the analysis of both raw emissions and the performance of various ATS devices (PCAT, TWC, PF, AOC, and CPF) under steady-state and transient operating conditions, following the standards established by the current Euro VI regulations. Additionally, two synthetic gas benches were used to characterize the reactive behavior of a TWC through tests of light-off, OSC, and transient conditions. These experiments facilitated the calibration and validation of a computational model of the TWC, providing a detailed understanding of the physicochemical phenomena occurring in this catalyst. Among the most relevant findings of this work is the high effectiveness of the TWC under slightly rich conditions for the simultaneous conversion of CO, UHC, and NOx. However, these conditions have the drawback of promoting NH3 formation in the TWC, which can be mitigated by applying pulses that alternate the exhaust composition between rich and lean phases. The formation of N2O and NH3 was strongly influenced by temperature and the presence of H2O and H2 in the exhaust gas, suggesting that both species could have significant problems during cold engine starts. This makes it essential to use devices such as PCAT and CPF, which improve the environmental performance of the engine by reducing these pollutants., This work was funded by the Vicerrectorado de Investigación of Universitat Politècnica de València through the FPI UPV SUBP2 grant (PAID-01-20) and by the PID2020-114289RB-I00, PRE2021-099841 grant from the FSE+, the Spanish Ministry of Science and Innovation, and the National Agency for Research (MCIN/AEI/10.13039/501100011033).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis doctoral (DoctoralThesis)

Study of the Potential of Electrified Powertrains with Dual-Fuel Combustion to Achieve the 2025 Emissions Targets in Heavy-Duty Applications

  • Martínez Boggio, Santiago Daniel
[ES] El transporte de personas, así como de carga ha evolucionado y crecido tremendamente en los últimos años. El desarrollo tecnológico debió ser adaptado a las diferentes medidas gubernamentales en términos de control de emisiones contaminantes. Desde el acuerdo de Paris en 2015 para mantener el crecimiento de la temperatura global por debajo de 1.5oC, se han impuesto también límites para las emisiones de CO2 por parte de vehículos de carretera. Para el sector del transporte pesado, se han impuesto límites de flota de 15% para 2025 y 30% para 2030 de reducción del CO2 con respecto a 2019. Por lo tanto, esta doble restricción de muy bajos niveles de emisiones contaminantes, así como de gases de efecto invernadero hacen que el sector del transporte este ante un gran desafío tecnológico. En 2022, el transporte de carga tiene un 99% de vehículos propulsados a motor de combustión interna con Diesel como combustible y sin ningún tipo de ayuda eléctrica en el sistema de propulsión. Los límites de emisiones contaminantes como Euro 6 son alcanzados con complejos sistemas de postratamiento que además agregan el consumo de Urea. Trabajos previos en la bibliografía, así como sistemas prototipo han demostrado que es posible alcanzar los objetivos de emisiones contaminantes con métodos avanzados de control de la combustión y así disminuyendo la complejidad del post tratamiento en la salida de gases. Con mayor éxito, el concepto de Reactivity Controlled Combustion Ignition puede alcanzar valores por debajo de Euro 6 con eficiencia similar a la combustión de Diesel. Sin embargo, no soluciona los problemas de emisiones de CO2. Por otro lado, en vehículos de pasajeros fue demostrado con suceso la aplicación de motores eléctricos en el sistema de propulsión para mejorar la eficiencia global del vehículo. El caso extremo son los vehículos puramente electicos donde se alcanza eficiencias por arriba del 70% contra 35% de los vehículos no electrificados. Sin embargo, limitaciones de autonomía, tiempo de carga y la no clara reducción global de la contaminación debido a las emisiones de la energía de la red eléctrica y la contaminación de las baterías de ion-litio hacen que este sistema de propulsión este bajo discusión. Para los vehículos con algún grado de electrificación, las emisiones de gases contaminantes siguen siendo un problema como para el caso no electrificado. Por lo tanto, esta tesis doctoral aborda el problema de emisiones contaminantes, así como de CO2 combinado modos avanzados de combustión con sistemas de propulsión electrificado. La aplicación de estas tecnologías se centra en el sector del transporte de carretera pesado. En particular, un camión de 18 toneladas de carga máxima que originalmente en 2022 equipa un motor seis cilindros de 8 litros con combustión convencional Diesel. El presente trabajo utiliza herramientas experimentales como son medidas en banco motor, así como en carretera para alimentar y validar modelos numéricos de motor, sistema de postratamiento, así como de vehículo. Este último es el punto central del trabajo ya que permite abordar sistemas como el mild hybrid, full hybrid y plug-in hybrid. Calibración de motor experimental dedicada a sistemas de propulsión hibrido es presentada con combustibles sintéticos y/o para llegar a los límites de Euro 7., [CA] El transport de persones, així com de càrrega ha evolucionat i crescut tremendament en els últims anys. El desenvolupament tecnològic degué ser adaptat a les diferents mesures governamentals en termes de control d'emissions contaminants. Des de l'acord de Paris en 2015 per a mantindre el creixement de la temperatura global per davall de 1.5oC, s'han imposat també límits per a les emissions de CO¿ per part de vehicles de carretera. Per al sector del transport pesat, s'han imposat limites de flota de 15% per a 2025 i 30% per a 2030 de reducció del CO¿ respecte a 2019. Per tant, aquesta doble restricció de molt baixos nivells d'emissions contaminants, així com de gasos d'efecte d'hivernacle fan que el sector del transport aquest davant un gran desafiament tecnològic. En 2022, el transport de càrrega té un 99% de vehicles propulsats a motor de combustió interna amb Dièsel com a combustible i sense cap mena d'ajuda elèctrica en el sistema de propulsió. Els limites d'emissions contaminants com a Euro 6 són aconseguits amb complexos sistemes de posttractament que a més agreguen el consum d'Urea. Treballs previs en la bibliografia, així com sistemes prototip han demostrat que és possible aconseguir els objectius d'emissions contaminants amb mètodes avançats de control de la combustió i així disminuint la complexitat del post tractament en l'eixida de gasos. Amb major èxit, el concepte de Reactivity Controlled Combustion Ignition pot aconseguir valors per davall d'Euro 6 amb eficiència similar a la combustió de Dièsel. No obstant això, no soluciona els problemes d'emissions de CO¿. D'altra banda, en vehicles de passatgers va ser demostrat amb succés l'aplicació de motors elèctrics en el sistema de propulsió per a millorar l'eficiència global del vehicle. El cas extrem són els vehicles purament electicos on s'aconsegueix eficiències per dalt del 70% contra 35% dels vehicles no electrificats. No obstant això, limitacions d'autonomia, temps de càrrega i la no clara reducció global de la contaminació a causa de les emissions de l'energia de la xarxa elèctrica i la contaminació de les bateries d'ió-liti fan que aquest sistema de propulsió aquest baix discussió. Per als vehicles amb algun grau d'electrificació, les emissions de gasos contaminants continuen sent un problema com per al cas no electrificat. Per tant, aquesta tesi doctoral aborda el problema d'emissions contaminants, així com de CO¿ combinat maneres avançades de combustió amb sistemes de propulsió electrificat. L'aplicació d'aquestes tecnologies se centra en el sector del transport de carretera pesat. En particular, un camió de 18 tones de càrrega màxima que originalment en 2022 equipa un motor sis cilindres de 8 litres amb combustió convencional Dièsel. El present treball utilitza eines experimentals com són mesures en banc motor, així com en carretera per a alimentar i validar models numèrics de motor, sistema de posttractament, així com de vehicle. Est ultime és el punt central del treball ja que permet abordar sistemes com el mild hybrid, full *hybrid i plug-in hybrid. Calibratge de motor experimental dedicada a sistemes de propulsió hibride és presentada amb combustibles sintètics i/o per a arribar als límits d'Euro 7., [EN] The transport of people, as well as cargo, has evolved and grown tremendously over the recent years. Technological development had to be adapted to the different government measures for controlling polluting emissions. Since the Paris agreement in 2015 limits have also been imposed on the CO2 emissions from road vehicles to keep global temperature growth below 1.5oC. For the heavy transport sector, fleet limits of 15% for 2025 and 30% for 2030 CO2 reduction have been introduced with respect to the limits of 2019. Therefore, the current restriction of very low levels of polluting emissions, as well as greenhouse gases, makes the transport sector face a great technological challenge. In 2021, 99% of freight transport was powered by an internal combustion engine with Diesel as fuel and without any type of electrical assistance in the propulsion system. Moreover, polluting emission limits such as the Euro 6 are achieved with complex post-treatment systems that also add to the consumption of Urea. Previous research and prototype systems have shown that it is possible to achieve polluting emission targets with advanced combustion control methods, thus reducing the complexity of post-treatment in the exhaust gas. With greater success, the concept of Reactivity Controlled Combustion Ignition can reach values below the Euro 6 with similar efficiency to Diesel combustion. Unfortunately, it does not solve the CO2 emission problems. On the other hand, in passenger vehicles, the application of electric motors in the propulsion system has been shown to successfully improve the overall efficiency of the vehicle. The extreme case is the purely electric vehicles, where efficiencies above 70% are achieved against 35% of the non-electrified vehicles. However, limitations of vehicle range, charging time, payload reduction and an unclear overall reduction in greenhouse emissions bring this propulsion system under discussion. For vehicles with some degree of electrification, polluting gas emissions continue to be a problem as for the non-electrified case. Therefore, this doctoral Thesis addresses the problem of polluting emissions and CO2 combined with advanced modes of combustion with electrified propulsion systems. The application of these technologies focuses on the heavy road transport sector. In particular, an 18-ton maximum load truck that originally was equipped with an 8-liter six-cylinder engine with conventional Diesel combustion. The present work uses experimental tools such as measurements on the engine bench as well as on the road to feed and validate numerical models of the engine, after-treatment system, and the vehicle. The latter is the central point of the work since it allows addressing systems such as mild hybrid, full hybrid, and plug-in hybrid. Experimental engine calibration dedicated to hybrid propulsion systems is presented with synthetic fuels in order to reach the limits of the Euro 7., This Doctoral Thesis has been partially supported by the Universitat Politècnica de València through the predoctoral contract of the author (Subprograma 2), which is included within the framework of Programa de Apoyo para la Investigación y Desarrollo (PAID)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Diseño de un controlador de memoria principal híbrido para aplicaciones de Big Data

  • Lurbe, Manel
  • Avargues, Miguel A.
  • Petit Martí, Salvador Vicente|||0000-0003-2426-4134
  • Gómez Requena, María Engracia|||0000-0003-1466-4118
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
[ES] La tecnologia de memoria DRAM ha sido la dominante en las implementaciones del subsistema de memoria. En los ultimos años, e impulsada principalmente por las enormes demandas de memoria de las aplicaciones de big data, la tecnologia NVRAM ha emergido como una tecnologia de memoria m¿as densa, permitiendo el diseño de nuevas jerarquias de memoria hibridas DRAM/NVRAM que combinan multiples tecnologias de memoria para equilibrar capacidad, latencia, coste y persistencia. En el diseño de jerarquias de memoria hibridas se est¿an aplicando dos enfoques principales: el enfoque de espacio de direcciones hibrido DRAM/NVRAM, que confia en el programador o el sistema operativo para elegir la tecnologia de memoria en la que debe almacenarse cada pagina de memoria; y el enfoque de espacio de direcciones (unico) NVRAM, en el que se necesita una tecnologia mas rapida (por ej., DRAM convencional) que actue como cache de la NVRAM para aumentar las prestaciones. Este enfoque presenta retos arquitectonicos como la organizacion de metadatos. En contraste con los enfoques existentes, este trabajo propone un controlador de memoria que aprovecha tecnologias de memoria recientes como eDRAM y MRAM para mejorar las prestaciones de la lenta memoria NVRAM cuando actua como memoria principal. La propuesta consiste en una jerarquia de cache de dos niveles en el controlador de memoria: una cache de sectores SRAM y una cache (x)RAM. La cache (x)RAM, mucho mas densa, ayuda a reducir significativamente el numero de accesos a la NVRAM. Los resultados experimentales demuestran que la implementaci¿on de la cache (x)RAM con eDRAM o MRAM es el metodo mas eficaz. Ademas, la eDRAM es capaz de mejorar la penalizacion en caso de fallo de la cache SRAM hasta en un 50 % y un 80 %, y las prestaciones globales del sistema en un 15 % y un 23 %., Este trabajo ha sido financiado por el Ministerio de Ciencia e Innovacion español y el FEDER europeo mediante las subvenciones PID2021-123627OBC51 y TED2021-130233B-C32. Manel Lurbe cuenta con el apoyo de Ayudas para Contratos predoctorales UPV - subprograma 1 (PAID-01-20).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Optical multi-trapping by Kinoform m-Bonacci lenses

  • Muñoz-Pérez, Francisco M.
  • Furlan, Walter D.
  • Ferrando, Vicente|||0000-0002-7434-7109
  • Monsoriu Serra, Juan Antonio|||0000-0003-3350-7951
  • Arias-Gonzalez, J. R.|||0000-0001-6802-0874
[EN] Optical manipulation is interfacing disciplines in the micro and nanoscale, from molecular biology to quantum computation. Versatile solutions for increasingly more sophisticated technological applications require multiple traps with which to maneuver dynamically several particles in three dimensions. The axial direction is usually overlooked due to difficulties in observing particles away from an objective-lens focal plane, a normal element in optical tweezers, and in managing interparticle distances along the trapping beam propagating direction, where strong radiation pressure and shadowing effects compromise the simultaneous and stable confinement of the particles. Here, aperiodic kinoform diffractive lens based on the m-Bonacci sequence are proposed as a newtrapping strategy. This lens provides split first-order diffractive foci whose separation depends on the generalized m-golden ratio. We show the extended manipulation capabilities of a laser tweezers system generated by these lens, in which concomitant trapping of particles in different focal planes takes place. Positioning particles in the axial direction with computer-controlled distances allows dynamic three-dimensional all-optical lattices, useful in a variety of microscale and nanoscale applications. (C) 2022 Optica Publishing Group under the terms of the Optica Open Access Publishing Agreement, Ministerio de Ciencia e Innovacion (PID2019-107391RB-I00); Generalitat Valenciana (PROMETEO/2019/048); Universitat Politecnica de Valencia (PAID-01-20-25).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Using osmotic pumps to induce sexual maturation in male and female European eels

  • Blanes-García, M.
  • García-Salinas, Pablo
  • MORINI, MARINA
  • Pérez Igualada, Luz María|||0000-0002-6678-7446
  • Asturiano, Juan F.|||0000-0002-6441-5294
  • Gallego Albiach, Victor|||0000-0002-9733-0625
[EN] Simple Summary The European eel is a species with high commercial value for aquaculture, and it has suffered a drastic reduction of its natural stocks during the last decades; thus, breeding in captivity is nowadays considered essential to avoid the extinction of the species. In this sense, a new method to maturate the European eel (males and females) for eel aquaculture has been studied. For the first time in the European eel, a controlled release hormone system (osmotic pumps) has been tested, which allowed to induce the testis maturation and sperm production in part of the males as well as a very early maturation and ovulation in the females. The European eel (Anguilla anguilla) is a commercially valued species for aquaculture. Over the past decades, it has experienced a drastic reduction in its natural stocks. Thus, breeding in captivity is considered essential, nowadays, to guarantee the eel aquaculture and to reduce pressure on natural populations. Traditionally, the European eel has been sexually matured by means of weekly hormonal injections, which cause stress to the fish. The purpose of this research study was to assess the use of osmotic pumps as a new method to induce sexual maturation in male and female European eels, without the weekly injection. The control groups were treated with weekly hormone injections (recombinant human chorionic gonadotropin for males and carp pituitary extract for females), and the implanted groups were treated with osmotic pumps (ALZET(R) osmotic pumps) loaded with the respective hormones. Regarding male European eels, this study shows that the use of controlled release systems was able to induce the maturation and spermiation, but without the necessary capacity to produce enough gametes with acceptable quality parameters that could meet the needs of a commercial eel hatchery. Concerning female European eels, the study demonstrates that the use of osmotic pumps loaded with CPE became an effective method, generating early maturations (4 to 10 weeks) in 50% of the females, so this method could become a viable alternative for eel hatchery procedures., This research was funded by "Ayuda a Primeros Proyectos de Investigacion (PAID-06-18), Vicerrectorado de Investigacion, Innovacion y Transferencia de la Universitat Politecnica de Valencia (UPV) Valencia, Spain". V.G. and M.M. have postdoc grants from the MICIU (IJCI-2017-34200) and the Generalitat Valenciana (APOSTD/2020/053), respectively. P.G.-S. and M.B.-G. have Ph.D. grants from the European Union through the Operational Program of the European Social Fund (ESF) of the Comunitat Valenciana 2014-2020 (ACIF/2018/147) and from the Universitat Politecnica de Valencia (PAID-01-20), respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

La ciudad de los cuidados. Infraestructura para un arte en común, The caring city. Infrastructure for an art in common

  • Ferriols-Montañana, Ana
  • Santiago Martin de Madrid, Paula|||0000-0001-7170-9007
[ES] Este artículo propone la teoría del cuidado como medio para la creación de infraestructuras de sustento en los modelos comunes. Se aborda la manera en la que los espacios comunes en la urbe proporcionan contexto y soporte para una creación artística alternativa. Para ello se realiza un análisis de los diferentes modelos, privado, público y común, en relación a la creación del espacio urbano y se identifican sus posibilidades de relación entre ellos. La teoría del cuidado se plantea como la metodología que prima en la gestión de los comunes al proponer una reivindicación de las labores reproductivas y de sostenimiento. A partir del estudio de varios proyectos, este artículo establece una clasificación de dos tipologías de intersección entre práctica artística contemporánea y espacios comunes, separando los proyectos artísticos que se constituyen como comunes, de los espacios comunes que ofrecen una infraestructura para la creación. También se analiza la relación que los proyectos analizados mantienen con el sistema público, desde la no interacción entre ambos, hasta la subvención de recursos. El objetivo de este análisis es el de mostrar la capacidad que los comunes proporcionan como infraestructura relacional y material para la creación artística., [EN] This article proposes that the creation of common infrastructures can be based on care theory. It addresses the way in which common spaces in the city provide context and backing for an alternative artistic creation. In order to do this, an analysis of the private, public and common models is carried out in relation to the creation of urban space. It is also approached an identification of relationship possibilities between each model. The theory of care is proposed as the methodology that prevails in the management of the commons since it entails a vindication of reproductive work. Based on the study of several projects, this article establishes a classification of two types of intersection between contemporary artistic practice and common spaces. Dividing the artistic projects that are constituted as commons, from the common spaces that offer an infrastructure for creation. The relationship that these projects maintain with the public system is also analysed, from non-interaction relationship to a subsidy of resources. The aim of the article is also to show the capacity of commons as a provider of relational and material infrastructures for artistic creation., Esta investigación ha sido realizada en el marco de los proyectos: Arte en Entornos Periféricos. de la Función Estética a la Dimensión Pública. (PGC2018-094351-B-C44-AR) (01/01/19 - 01/01/23), financiado por la Agencia Estatal de Investigación del Gobierno de España; y Humanidades Ecológicas y Transiciones Ecosociales. Propuestas Éticas, Estéticas y Pedagógicas para el Antropoceno. (PID2019-107757RB-I00) (01/06/20 - 01/06/23), financiado por la Agencia Estatal de Investigación del Gobierno de España. Se inscribe también en el marco de financiación del Programa de Ayudas de Investigación y Desarrollo (PAID-01-20) de la Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Iterative schemes for finding all roots simultaneously of nonlinear equations

  • Cordero Barbero, Alicia|||0000-0002-7462-9173
  • Garrido-Saez, Neus|||0000-0002-7903-8591
  • Torregrosa Sánchez, Juan Ramón|||0000-0002-9893-0761
  • Triguero-Navarro, Paula|||0000-0002-7319-9992
[EN] In this paper, we propose a procedure that can be added to any iterative scheme in order to turn it into an iterative method for approximating all roots simultaneously of any nonlinear equations. By applying this procedure to any iterative method of order p, we obtain a new scheme of order of convergence 2p. Some numerical tests allow us to confirm the theoretical results and to compare the proposed schemes with other known methods for simultaneous roots of polynomial and non-polynomial functions., This research was partially supported by Grant PGC2018-095896-B-C22, funded by MCIN/AEI/10.13039/5011000113033 by " ERDF A way of making Europe", European Union, also by the internal research project Grant ADMIREN, Universidad Internacional de La Rioja (UNIR), Spain and by Contrato Predoctoral, Universitat Politecnica de Valencia, Spain PAID-01-20-17 (UPV) and Ayuda Movilidad Estancia Doctorado, Universitat Politecnica de Valencia, Spain 01/10/2021.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Triiodide Faujasites With Reactive, Ionic, Antimicrobial, and Catalytic Applications

  • Mingueza-Verdejo, Paloma
  • Minguez-Avellan, Miriam
  • Hernandez-Garrido, Juan C.
  • Balaguer-Grau, Adrián
  • Boix, Pablo P.|||0000-0001-9518-7549
  • Oliver-Meseguer, Judit|||0000-0003-1555-3583
  • Leyva Perez, Antonio|||0000-0003-1063-5811
[EN] Zeolites are microporous materials widely used in industry for hosting and exchanging molecules and cations, but the inclusion of anions is severely limited by the anionic nature of the zeolitic framework. Here, we show that commercially available alkyl iodides and faujasite zeolites (one of the representative zeolite families) react in a tandem dehydroiodination-oxidation process under open-air reaction conditions, to give triiodide anions (I3 -) inside the faujasite (I3 -@faujasite), after releasing the corresponding alkene of the alkyl iodide and water as only by-products. This clean postsynthetic solid reaction does not employ any additive, solvent, or protecting atmosphere and can be carried out in multigram scale, to obtain up to approximate to 25 wt% I3 - loadings inside the zeolites, bench stable for months. The I3 -@faujasites are studied here as water disinfection agents, bacteria and yeast antiseptics, solid electrolytes, and catalytic solids, and, in many cases, outperform the activity of the state-of-the-art materials for each application. Besides, the densely packaged I3 -@NaX does not disaggregate into hydrofluoric acid, which allows the stability of this zeolite in strong acidic media. This conceptually different anion incorporation methodology in faujasites open new avenues to the design of anion-containing microporous zeolitic materials, with controlled release if desired, for a wide variety of applications., This study was supported by the Ministerio de Ciencia, Innovacion y Universidades (PID2023-148441NB-I00, CEX2021-001230-S, RYC2022-036154-I, PRE2021-099951, PID2020-119628RB-C31) and Universitat Politecnica de Valencia (PAID 01-20).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

GB_SynP: A Modular dCas9-Regulated Synthetic Promoter Collection for Fine-Tuned Recombinant Gene Expressionin Plants

  • Moreno-Giménez, Elena
  • Selma, Sara
  • Calvache-Román, Camilo Alberto
  • Orzáez Calatayud, Diego Vicente
[EN] Programmable transcriptional factors based on the CRISPR architecture are becoming commonly used in plants for endogenous gene regulation. In plants, a potent CRISPR tool for gene induction is the so-called dCasEV2.1 activation system, which has shown remarkable genome-wide specificity combined with a strong activation capacity. To explore the ability of dCasEV2.1 to act as a transactivator for orthogonal synthetic promoters, a collection of DNA parts was created (GB_SynP) for combinatorial synthetic promoter building. The collection includes (i) minimal promoter parts with the TATA box and 5'UTR regions, (ii) proximal parts containing single or multiple copies of the target sequence for the gRNA, thus functioning as regulatory cis boxes, and (iii) sequence-randomized distal parts that ensure the adequate length of the resulting promoter. A total of 35 promoters were assembled using the GB_SynP collection, showing in all cases minimal background and predictable activation levels depending on the proximal parts used. GB_SynP was also employed in a combinatorial expression analysis of an autoluminescence pathway in Nicotiana benthamiana, showing the value of this tool in extracting important biological information such as the determination of the limiting steps in an enzymatic pathway., This work was funded by Era-CoBiotech SUSPHIRE (PCI2018-092893) and PID2019-108203RB-I00 Plan Nacional I+D, Spanish Ministry of Economy and Competitiveness. E.M.-G. and S.S. acknowledge support by a FPU (FPU18/02019) and a FPI (BIO2016-78601-R) H2020 Research Program: 760331 Newcotiana fellowships, respectively, from the Spanish Ministry of Science, Innovation and Universities. C.C. acknowledges support by a FPI-UPV (PAID-01-20) fellowship from Universitat Politecnica de Valencia. The authors would like to thank Dr. Lynne Yenush for her assistance with the manuscript preparation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Characterization of potential spermatogonia biomarker genes in the European eel (Anguilla anguilla)

  • Blanes-García, Marta
  • Marinovic, Zoran
  • Herranz-Jusdado, Juan Germán
  • Xie, Xuan
  • Ferrão, Leonor
  • Horváth, Ákos
  • Psenicka, Martin
  • Morini, Marina
  • Gallego Albiach, Victor|||0000-0002-9733-0625
  • Pérez Igualada, Luz María|||0000-0002-6678-7446
  • Asturiano, Juan F.|||0000-0002-6441-5294
  • Baloch, Abdul Rasheed
[EN] Identification of specific molecular markers for spermatogonial stem cells in teleost is crucial for enhancing the efficacy of reproductive biotechnologies in aquaculture, such as transplantation and surrogate production in fishes. Since it is not yet possible to distinguish spermatogonial stem cells of European eel (Anguilla anguilla) using specific molecular markers, we isolated spermatogonial cells from immature European eels to find these potential markers. We attempted this by studying three candidate genes: vasa, nanos2, and dnd1. Two vasa (vasa1 and vasa2) genes, nanos2, and dnd1 were identified, characterized, and studied in the muscle, testis, and isolated spermatogonia. Our results showed that vasa1 and vasa2 had the highest levels of expression when measured by qPCR. In situ hybridization and immunochemistry assays showed that the four genes were localized explicitly in type A spermatogonia. However, vasa1 and vasa2 exhibited stronger signals in the immature testicular tissue than the other two potential markers. According to this, vasa1 and vasa2 were found to be the most effective markers for spermatogonial cells in the European eel., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. Funded by the European Union s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement Nº 642893 (IMPRESS; including the JGHJ and ARB predoctoral contracts), and by the Ministerio de Ciencia e Innovación y Universidades (Project EELGONIA; RTI2018-096413-BI00). MBG and LF have PhD contracts from the UPV (PAID01 20) and GVA (GRISOLIAP/2020/063), respectively. VG joined a grant RYC2021-031558-I funded by MCIN/AEI/10.13039/501100011033, and by European Union NextGenerationEU/PRTR. MM has a postdoc contract supported byMCIN/AEI/10.13039/501100011033 funded by European Union NextGenerationEU/PRTR (C17.I1) and by Generalitat Valenciana (THINKINAZUL/2021/012) to SEASPERM. MP was fnancially supported by the Ministry of Education, Youth and Sports of the Czech Republic project CENAKVA (LM2018099) and Biodiversity (CZ.02.1.01/0.0/0.0/16_025/0007370), and the Czech Science Foundation (grant number 22-31141 J)). ZM and ÁH were supported by the Ministry of Innovation and Technology within the framework of the Thematic Excellence Programme 2020, National Challenges Subprogramme (TKP2020-NKA-16) as well as the NKFIH K138425 and FK 142933 projects. Funding for open access charge: CRUE-Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis doctoral (DoctoralThesis)

Optimizing Prefetch with Machine Learning and Analyzing its Impact on the Performance of Deep Memories Hierarchies

  • Lurbe Sempere, Manel
[ES] La creciente presión sobre los recursos compartidos de la jerarquía de memoria en los sistemas de cómputo modernos se ha convertido en un factor crítico que limita el rendimiento. La proliferación de aplicaciones concurrentes, impulsada por cargas de trabajo de aprendizaje automático y entornos virtualizados en la nube, ha transformado la concepción tradicional de las jerarquías de memoria y acentuado la necesidad de ampliar la capacidad de la memoria principal. Sin embargo, la memoria DRAM convencional enfrenta restricciones físicas y tecnológicas que comprometen su escalabilidad, lo que ha impulsado la incorporación de memorias no volátiles (NVRAM) como alternativa emergente. A pesar de sus ventajas en densidad, la mayor latencia de acceso de la NVRAM plantea nuevos desafíos que requieren rediseñar y optimizar los mecanismos de gestión de memoria. En este contexto, los mecanismos de prefetching resultan fundamentales para mitigar las penalizaciones de latencia y aprovechar plenamente las nuevas tecnologías de memoria. No obstante, la configuración de prefetchers en arquitecturas multinivel plantea tensiones significativas, dado que su carácter especulativo incrementa el consumo de ancho de banda y puede deteriorar el rendimiento en sistemas con alta concurrencia. Así, la selección adecuada de configuraciones de prefetching requiere un equilibrio entre las características de acceso de las aplicaciones y la eficiencia en el uso del ancho de banda compartido. De manera complementaria, la integración de memorias NVRAM en la jerarquía introduce profundos cambios estructurales. La menor velocidad de estas memorias en comparación con la DRAM exige el diseño de nuevas organizaciones de caché y controladores de memoria capaces de mitigar sus limitaciones de latencia y preservar el rendimiento de los procesadores de altas prestaciones. Esta tesis aborda de forma conjunta dos problemáticas clave en la evolución de las jerarquías de memoria: (i) la selección óptima de configuraciones de prefetching en cargas de trabajo multiprogramadas mediante técnicas basadas en redes neuronales, y (ii) el diseño de jerarquías profundas con NVRAM orientadas a aumentar la capacidad de memoria principal sin comprometer el rendimiento., [EN] The increasing pressure on shared resources within the memory hierarchy of modern computing systems has become a critical performance-limiting factor. The proliferation of concurrent applications, driven by machine learning workloads and cloud-based virtualized environments, has reshaped the traditional conception of memory hierarchies and highlighted the need to expand main memory capacity. However, conventional DRAM faces physical and technological constraints that hinder its scalability, fostering the integration of non-volatile memories (NVRAM) as an emerging alternative. Despite their advantages in density, NVRAM technologies introduce higher access latency, which demands new strategies for memory management and optimization. In this context, prefetching mechanisms play a fundamental role in mitigating latency penalties and fully exploiting the potential of emerging memory technologies. Nevertheless, the configuration of prefetchers in multilevel architectures poses significant challenges, as their speculative nature increases bandwidth consumption and can degrade performance in highly concurrent systems. Therefore, the optimal selection of prefetching configurations requires balancing application-specific access patterns with efficient shared bandwidth utilization. Complementarily, the integration of NVRAM into the hierarchy introduces profound structural changes. The slower speed of these memories compared to DRAM necessitates the design of new cache organizations and memory controllers to mitigate latency limitations and sustain high-performance processor efficiency. This dissertation %jointly addresses two key challenges in the evolution of memory hierarchies: (i) the optimal selection of prefetching configurations in multiprogrammed workloads through neural network-based techniques, and (ii) the design of deep NVRAM hierarchies aimed at increasing main memory capacity without compromising system performance., [CA] La creixent pressió sobre els recursos compartits dins de la jerarquia de memòria dels sistemes de computació moderns s'ha convertit en un factor crític que limita el rendiment. La proliferació d'aplicacions concurrents, impulsada per les càrregues de treball d'aprenentatge automàtic i els entorns virtualitzats al núvol, ha transformat la concepció tradicional de les jerarquies de memòria i ha posat de manifest la necessitat d'ampliar la capacitat de la memòria principal. No obstant això, la DRAM convencional afronta restriccions físiques i tecnològiques que en dificulten l'escalabilitat, fet que ha propiciat la incorporació de memòries no volàtils (NVRAM) com a alternativa emergent. Tot i els seus avantatges en densitat, les NVRAM introdueixen una latència d'accés superior, la qual cosa exigeix noves estratègies de gestió i optimització de la memòria. En aquest context, els mecanismes de prefetching són fonamentals per a mitigar les penalitzacions de latència i aprofitar plenament el potencial de les noves tecnologies de memòria. Tanmateix, la configuració dels prefetchers en arquitectures multinivell planteja reptes importants, atés que el seu caràcter especulatiu incrementa el consum d'ample de banda i pot degradar el rendiment en sistemes amb alta concurrència. Per tant, la selecció òptima de configuracions de prefetching requereix equilibrar els patrons d'accés específics de les aplicacions amb una utilització eficient dels recursos compartits. De manera complementària, la integració de NVRAM en la jerarquia introdueix canvis estructurals profunds. La menor velocitat d'aquestes memòries en comparació amb la DRAM obliga a dissenyar noves organitzacions de memòria cau i nous controladors de memòria capaços de mitigar les seues limitacions de latència i mantindre l'eficiència dels processadors d'altes prestacions. Aquesta tesi aborda conjuntament dos reptes clau en l'evolució de les jerarquies de memòria: (i) la selecció òptima de configuracions de prefetching en càrregues de treball multiprogramades mitjançant tècniques basades en xarxes neuronals, i (ii) el disseny de jerarquies profundes amb NVRAM orientades a augmentar la capacitat de la memòria principal sense comprometre el rendiment del sistema., This work has been supported by the Spanish Ministerio de Ciencia e Innovación and European ERDF under grants PID2021-123627OB-C51, PID2024-158682OB-C31, by MCIN/AEI/10.13039/501100011033 and European Union NextGenerationEU/PRTR under grant TED2021-130233B-C32, and Generalitat Valenciana under grant CIPROM/2024/007. Manel Lurbe is supported by Ayudas Contratos predoctorales UPV-subprograma 1 (PAID-01-20).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Superoxidase dismutases (SODs) in the European eel: Gene characterization, expression response to temperature combined with hormonal maturation and possible migratory implications

  • Ferrão, Leonor
  • Blanes-García, Marta
  • Morini, Marina
  • Pérez Igualada, Luz María|||0000-0002-6678-7446
  • Asturiano, Juan F.|||0000-0002-6441-5294
[EN] Superoxide dismutases (SODs) are antioxidant enzymes that protect cells from oxidation. Three SODs have been identified in mammals, but there is limited information in teleosts. This study investigates SODs in the European eel and their expression patterns during testis maturation. Phylogenetic and synteny analyses revealed SODs paralogs and their evolution in vertebrates. The eel possesses one SOD1 and two SOD2/3 (a and b), indicating SOD2 and SOD3 duplication in elopomorphs. SODs expression were then evaluated in various male and female tissues. SOD1 is more expressed in females, while SOD2a and SOD2b dominate brain-pituitary-gonad tissues in both sexes. SOD3a showed predominant expression in the ovary and the male livers, whereas SOD3b was found in the pituitary and brain of both sexes. The effects of different maturation protocols (standard hormonal treatment vs. same protocol preceded with cold seawater pre-treatment) on SODs expression during testis maturation were evaluated. Salinity increase at the onset of standard treatment at 20 ¿C, simulating early migration, upregulated SOD1, SOD2a, and SOD2b, coinciding with spermatogonia type A differentiated cells dominance. Thereafter, SOD2a and SOD3a decreased, while SOD2b increased during hormonal treatment- induced spermatogenesis. Pre-treatment with seawater at 10 ¿C, mimicking the conditions at the beginning of the seawater migration, downregulated SOD1 but increased SOD3a expression. Finally, the standard hormonal treatment, replicating spawning at higher temperatures, downregulated SOD1 in eels without any pre-treatment while SOD2a expression increased in pre-treated eels. This study revealed tissue-specific, sex-dependent, and maturation-related SOD expression patterns, predicting SODs dynamic expression profiles during their reproductive migration., This study received funding from the Spanish MICIU (Project EELGONIA; RTI2018-096413-B-I00). LF has a predoctoral contract funded by the Generalitat Valenciana, Programa Grisolía (GRISOLIAP/2020/063). MBG has a predoctoral contract from the Universitat Politecnica de Valencia (PAID-01-20). MM had a postdoctoral contract funded by the Generalitat Valenciana (APOSTD/2020/053). Funding for open access charge: CRUE-Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Simultaneous roots for vectorial problems

  • Chinesta, Francisco
  • Cordero Barbero, Alicia|||0000-0002-7462-9173
  • Garrido-Saez, Neus|||0000-0002-7903-8591
  • Torregrosa Sánchez, Juan Ramón|||0000-0002-9893-0761
  • Triguero-Navarro, Paula|||0000-0002-7319-9992
[EN] In this manuscript, we design an iterative step that can be added to any numerical process for solving systems of nonlinear equations. By means of this addition, the resulting iterative scheme obtains, simultaneously, all the solutions to the vectorial problem. Moreover, the order of this new iterative procedure duplicates that of their original partner. We apply this step to some known methods and analyse the behaviour of these new algorithms, obtaining simultaneously the roots of several nonlinear systems., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This research was partially supported by Universitat Politècnica de València, Ayuda Movilidad Estancia Doctorado 01/10/2021 and Universitat Politècnica de València Contrato Predoctoral PAID-01-20-17 (UPV).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Automatic Segmentation of the Retinal Nerve Fiber Layer by Means of Mathematical Morphology and Deformable Models in 2D Optical Coherence Tomography Imaging

  • Berenguer-Vidal, Rafael
  • Verdú-Monedero, Rafael
  • Morales-Sánchez, Juan
  • Sellés-Navarro, Inmaculada
  • García-Pardo, José Gabriel
  • del Amor, Rocío
  • Naranjo Ornedo, Valeriana|||0000-0002-0181-3412
[EN] Glaucoma is a neurodegenerative disease process that leads to progressive damage of the optic nerve to produce visual impairment and blindness. Spectral-domain OCT technology enables peripapillary circular scans of the retina and the measurement of the thickness of the retinal nerve fiber layer (RNFL) for the assessment of the disease status or progression in glaucoma patients. This paper describes a new approach to segment and measure the retinal nerve fiber layer in peripapillary OCT images. The proposed method consists of two stages. In the first one, morphological operators robustly detect the coarse location of the layer boundaries, despite the speckle noise and diverse artifacts in the OCT image. In the second stage, deformable models are initialized with the results of the previous stage to perform a fine segmentation of the boundaries, providing an accurate measurement of the entire RNFL. The results of the RNFL segmentation were qualitatively assessed by ophthalmologists, and the measurements of the thickness of the RNFL were quantitatively compared with those provided by the OCT inbuilt software as well as the state-of-the-art methods., This work was partially funded by Spanish National projects AES2017-PI17/00771 and AES2017-PI17/00821 (Instituto de Salud Carlos III), PID2019-105142RB-C21 (AI4SKIN) (Spanish Ministry of Economy and Competitiveness), PTA2017-14610-I (State Research Spanish Agency), regional project 20901/PI/18 (Fundacion Seneca) and Polytechnic University of Valencia (PAID-01-20).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Toward surrogate-based conservation: Preservation of European eel (Anguilla anguilla) spermatogonial stem cells

  • Marinovic, Zoran
  • Blanes-García, Marta
  • Scekic, Ilija
  • Lujic, Jelena
  • Balogh, Reka Eniko
  • Ferrao, Leonor
  • Morini, Marina
  • Toth, Vilmos
  • Urbanyi, Bela
  • Kobolak, Julianna
  • Horvath, Akos
  • Asturiano, Juan F.|||0000-0002-6441-5294
[EN] In this study, we optimized cryopreservation and hypothermic storage protocols for the European eel (Anguilla anguilla) spermatogonial stem cells (SSCs). As the European eel is listed as a critically endangered fish species on the IUCN red list, there is a strong need to develop and advance ex situ conservation strategies beyond the current conservation measures. Cryopreservation of SSCs was done through freezing and vitrification of testicular tissue pieces. Freezing was optimized through five sequential experiments and has yielded SSC post-thaw viability above 50%. The physiological competence of frozen/thawed cells was tested by transplanting donor-derived testicular cells into sterilized common carp larvae. After two months, gonads of 32% of the recipients displayed a positive fluorescent signal indicating that frozen/thawed cells retained physiological competence. Needle-immersed vitrification was optimized by testing different equilibration and vitrification solutions. SSCs displayed viability rates above 70% after protocol optimization. Hypothermic storage experiments displayed that storage of isolated testicular cells is more favorable than storing testicular tissue pieces, and that there was no significant reduction of SSC viability for 6 days when storing them in testicular cell suspension. Results obtained in this study are the first validated protocols for SSC preservation in the European eel and present the foundation for biobanking and future development of surrogate-based ex situ conservation programs for this and phylogenetically-related eel species., The study was supported by the National Research, Development, and Innovation Office of Hungary (grants K138425 to AH and FK142933 to ZM) , the Research Excellence Programme, and the Flagship Research Groups Programme of the Hungarian University of Agriculture and Life Sciences (grants to ZM and AH) . This study has been supported by the Project PROMETEO 2025 "Climate Change, Reproduction and Conservation of Aquatic Species in the Mediterranean Ecosystems (CLIMEDREP)" funded by the Conselleria de Educacion, Cultura, Universidades y Empleo of Generalitat Valenciana (CIPROM/2024/2) . MBG received a predoctoral contract from the Universitat Politecnica de Valencia (grant PAID-01-20) to carry out her thesis. VT was supported by the Hungarian Academy of Sciences (NAP3.0 Program NAP2022-I-3/2022) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

GBDM+: an improved methodology for a GNSS-based distance meter

  • Baselga Moreno, Sergio|||0000-0002-0492-4003
  • García-Asenjo Villamayor, Luis|||0000-0001-6535-2216
  • Garrigues Talens, Pascual
  • Luján, Raquel
[EN] The determination of distances consistent with the definition of the base unit of length in the International System of Units (SI), the SI meter, with uncertainties of less than 1 ppm up to 5 km in the open air is a current challenge that is being increasingly required for different applications, including the determination of local ties, calibration baselines, and high precision geodetic metrology in singular scientific and engineering projects. The required knowledge of the index of refraction of the propagating medium at the same level of 1 ppm is a hard limit to the use of precise electronic distance meters (EDMs), which has motivated the recent development of new two-color, refractivity compensated, EDM prototypes. As an alternative, the use of global navigation satellite systems (GNSS) could benefit from their high scale stability although the lack of appropriate estimation of the uncertainties in their sources of error and their unknown propagation into the final result during the data processing has prevented a rigorous uncertainty analysis and, therefore, the use of GNSS for absolute distance determination. Stemming from our initial methodology for a GNSS-based distance meter (GBDM) that was restricted to relatively horizontal baselines and distances up to 1 km only, we have improved the method so that its application range is extended to baselines of up to 5 km with a possibly significant height difference so that it provides the final baseline distance with the corresponding uncertainty derived from the uncertainties in the different error sources rigorously propagated through the equations by which the distance is finally determined. This improved methodology, named as GBDM+, constitutes a significant step forward in the application of GNSS to open air length metrology., The work leading to this paper was performed within the 18SIB01 GeoMetre project of the European Metrology Programme for Innovation and Research (EMPIR). This project has received funding from the EMPIR programme co-financed by the Participating States and from the European Union's Horizon 2020 research and innovation programme, funder ID: 10.13039/100014132. Raquel Lujan acknowledges the funding from the Programa de Ayudas de Investigacion y Desarrollo (PAID-01-20) de la Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

DeepP: Deep Learning Multi-Program Prefetch Configuration for the IBM POWER 8

  • Lurbe-Sempere, Manel
  • Feliu-Pérez, Josué|||0000-0003-3017-4266
  • Petit Martí, Salvador Vicente|||0000-0003-2426-4134
  • Gómez Requena, María Engracia|||0000-0003-1466-4118
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
[EN] Current multi-core processors implement sophisticated hardware prefetchers, that can be configured by application (PID),to improve the system performance. When running multiple applications, each application can present different prefetch requirements,hence different configurations can be used. Setting the optimal prefetch configuration for each application is a complex task since itdoes not only depend on the application characteristics but also on the interference at the shared memory resources (e.g. memorybandwidth). In his paper, we proposeDeepP, a deep learning approach for the IBM POWER8 that identifies at run-time the bestprefetch configuration for each application in a workload. To this end, the neural network predicts the performance of each applicationunder the studied prefetch configurations by using a set of performance events. The prediction accuracy of the network is improvedthanks to a dynamic training methodology that allows learning the impact of dynamic changes of the prefetch configuration onperformance. At run-time, the devised network infers the best prefetch configuration for each application and adjusts it dynamically.Experimental results show that the proposed approach improves performance, on average, by 5,8%, 6,7%, and 15,8% compared tothe default prefetch configuration across different 6-, 8-, and 10-application workloads, respectively., This work was supported in part by Ministerio de Ciencia, Innovacion y Universidades and the European ERDF under Grant RTI2018-098156-B-C51, in part by Generalitat Valenciana under Grant AICO/2021/266, and in part by Ayudas Contratos predoctorales UPV -subprograma 1 (PAID-01-20). The work of Josue Feliu was supported by a Juan de la Cierva Formacion Contract under Grant FJC2018-036021-I.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

On the Equivalence Between Null Space and Orthogonal Space in Latent Variable Regression Modeling

  • García-Carrión, Sergio
  • Francesco Sartori
  • Borràs-Ferrís, Joan
  • Facco, Pierantonio
  • Barolo, Massimiliano
  • Ferrer, Alberto|||0000-0001-7244-5947
[EN] The concepts of null space and orthogonal space have been developed in independent contexts and with different purposes: the former arises in the inversion of partial least-squares (PLS) regression models, and the latter in orthogonal PLS (O-PLS) modeling. In this study, we bridge PLS model inversion and O-PLS modeling by mathematically proving that the null space and the orthogonal space are the same space. We also provide a graphical interpretation of the equivalence between the two spaces, using both a simulated and a real case study., Financial support was granted by the Research and Development Support Program of the UPV (PAID-01-20), and also by the Generalitat Valenciana (AICO/2021/111). Funding for open access charge was provided by CRUE Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Xenotransplantation of European Eel (Anguilla anguilla) Spermatogonia in Zebrafish (Danio rerio) and European Sea Bass (Dicentrarchus labrax)

  • Blanes-García, Marta
  • Marinovic, Zoran
  • Morini, Marina
  • Vergnet, Alain
  • Horváth, Ákos
  • Asturiano, Juan F.|||0000-0002-6441-5294
[EN] The European eel encounters challenges in achieving sexual maturation in captivity, which has been a concern for researchers. This study explores surrogate broodstock technology as an alternative approach for eel production. The present study aimed to evaluate zebrafish and European sea bass as potential recipients for European eel spermatogonia transplantation, given the abundance of eel type A spermatogonia (SPGA). Immature European eel testes were dissected and maintained at 4 °C or cryopreserved. SPGA were obtained by dissociation of fresh or post-thawed tissue, employing an enzymatic solution, and then labelled with fluorescent membrane marker PKH26. SPGA from fresh tissue were transplanted into wild-type zebrafish larvae and triploid European sea bass larvae, while SPGA from cryopreserved testis were transplanted into vasa::egfp transgenic zebrafish larvae. One-and-a-half months post-transplantation (mpt), fluorescent donor cells were not detected in the gonads of zebrafish or European sea bass. Molecular qPCR analyses at 1.5 or 6 mpt did not reveal European eel-specific gene expression in the gonads of any transplanted fish. The findings suggest that the gonadal microenvironments of zebrafish and European sea bass are unsuitable for the development of European eel spermatogonia, highlighting distinctive spermatogonial stem cell migration mechanisms within teleost species, This work was supported by the Spanish Ministry of Science, Innovation and Universities (EELGONIA; RTI2018-096413-B-I00) and the ThinkInAzul Project, supported by the Spanish Ministry of Science and Innovation (MCIN) with funding from the European Union NextGenerationEU (PRTRC17.I1) and the Generalitat Valenciana to SEASPERM (THINKINAZUL/2021/012), including the Marina Morini postdoctoral contract. The study was partially funded by the EU H2020 Research Innovation Program (AQUAEXCEL3.0; grant agreement No. 871108). Marta Blanes-García had a PhD contract from the UPV (PAID-01-20). Zoran Marinovi¿c and Ákos Horváth were supported by the National Research, Development and Innovation Office of Hungary (NKFIH K138425 and FK142933 grants), the National Excellence Program of the Ministry for Culture and Innovation from the source of the National Research, Development and Innovation fund (ÚNKP-23-4-II-MATE-10 grant) and the KKP program of the Hungarian University of Agriculture and Life Sciences, as well as the Flagship Research Groups Programme of the Hungarian University of Agriculture and Life Sciences and the Research Excellence Programme of the Hungarian University of Agriculture and Life Sciences.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis doctoral (DoctoralThesis)

Fresnel Solar Collector System for Indirect Steam Generation for Industrial Processes with Thermal Energy Storage

  • David-Hernandez, Marco Antonio
[ES] El sector industrial es responsable de una cantidad significativa de emisiones anuales de carbono, en gran parte debido a su elevado consumo de energía y a su dependencia de los combustibles fósiles para la producción de calor. Por tanto, es evidente que la utilización de fuentes de calor alternativas y renovables, como los colectores solares de concentración, representa una oportunidad prometedora para la descarbonización de este sector. Sin embargo, los sistemas de colectores solares dependen del recurso solar, que es una fuente de energía intermitente. Por ello, es necesario disponer de un sistema de almacenamiento de energía térmica (AET) que facilite el almacenamiento de la energía sobrante y su posterior utilización cuando sea necesario, garantizando así un suministro de calor más constante. Con el fin de demostrar la viabilidad de los sistemas solares térmicos para aplicaciones industriales, la empresa Solatom CSP instaló un campo solar experimental dentro del proyecto SOLPINVAP. Está compuesto por una serie de colectores modulares lineales Fresnel (CLF) y un kettle reboiler, que es un tipo de intercambiador de calor de carcasa y tubos. Esta tesis analiza el rendimiento del sistema en modo de generación indirecta de vapor. En este modo, el calor se absorbe en el interior de los tubos absorbedores mediante un fluido caloportador y se transfiere a la carcasa del kettle reboiler, donde se produce vapor. Además, esta tesis examina los circuitos hidráulicos y sus componentes del campo solar experimental, así como el sistema de control y el sistema de monitorización asociados al mismo. Además, se presenta el desarrollo de un modelo de sistema CLF de calor solar para procesos industriales (CSPI). El modelo se desarrolló en el entorno MATLAB orientado a objetos. Se desarrolló un modelo 3D del campo solar CLF dentro del entorno Tonatiuh (un software de trazado de rayos), lo que permitió estimar la eficiencia óptica máxima y los correspondientes modificadores del ángulo de incidencia de los colectores Fresnel. Los resultados demuestran que el calor absorbido en los colectores presenta una incertidumbre del 12%, mientras que el calor generado presenta una incertidumbre del 3%. Para reducir la incertidumbre inherente al cálculo del calor absorbido y generado, se realizó un estudio para seleccionar sensores y equipos de monitorización más precisos. Además, se realizó un trabajo de campo para instalar los equipos seleccionados, más precisos, en el campo solar SOLPINVAP. Los resultados de la monitorización demuestran que la incertidumbre en el calor absorbido se redujo en un 79% como consecuencia de la mejora en la instrumentación de medida. Como parte de este proyecto de tesis, se realizó una estancia de investigación en el Departamento de Ingeniería de Mecánica y Metalúrgica de la Pontificia Universidad Católica de Chile, en Santiago. El equipo de investigación anfitrión ha estado investigando la posible aplicación de AET de lecho compacto sólido con escoria de cobre, un subproducto del proceso pirometalúrgico del mineral de cobre, como medio de almacenamiento. Además, el equipo de investigación ha desarrollado un modelo matemático que simula el proceso termodinámico y de transferencia de calor asociado al flujo de aire y a las partículas sólidas. En consecuencia, el modelo del sistema de AET de lecho compacto sólido se ha integrado en el modelo del sistema CSPI para examinar su efecto en el rendimiento del sistema. Además, esta tesis examina la dinámica entre las temperaturas de los distintos componentes del sistema. En consecuencia, esta tesis presenta un diseño para un sistema integrado CSPI con AET de lecho compacto sólido. Los resultados demuestran que el sistema con el AET de lecho compacto sólido es capaz de generar un 18% más de energía que el sistema sin el AET de lecho compacto sólido., [CA] El sector industrial és responsable d'una quantitat significativa d'emissions anuals de carboni, en gran part a causa del seu alt consum d'energia i la dependència dels combustibles fòssils per a la producció de calor. Per tant, és evident que la utilització de fonts de calor alternatives i renovables, com la concentració de col·lectors solars, representa una oportunitat prometedora per a la descarbonització d'aquest sector. No obstant això, els sistemes de col·lectors solars depenen del recurs solar, que és una font d'energia intermitent. Per tant, és necessari disposar d'un sistema d'emmagatzematge d'energia tèrmica (TES) per facilitar l'emmagatzematge de l'energia sobrant i la seva posterior utilització quan sigui necessari, assegurant així un subministrament de calor més consistent. Per tal de demostrar la viabilitat dels sistemes solars tèrmics per a aplicacions industrials, l'empresa Solatom CSP va instal·lar un camp solar experimental dins del projecte SOLPINVAP. Comprèn una sèrie de col·lectors lineals modulars de Fresnel i un Kettle Reboiler, que és un tipus d'intercanviador de calor de carcassa i tubs. Aquesta tesi analitza el rendiment del sistema en mode de generació de vapor indirecte. En aquest mode, la calor s'absorbeix a l'interior dels tubs absorbents mitjançant l'ús d'un fluid de transferència de calor, i es transfereix a la capa del Reboiler, on es produeix vapor. A més, aquesta tesi examina els circuits hidràulics i els seus components del camp solar experimental, així com el sistema de control i el sistema de monitoratge associat a aquest. A més, es presenta el desenvolupament d'un model de sistema LFC per a processos industrials (SHIP). El model es va desenvolupar dins de l'entorn MATLAB orientat a objectes. Es va desenvolupar un model 3D del camp solar LFC dins de l'entorn Tonatiuh (un programari de rastreig de raigs), que permet estimar l'eficiència òptica màxima i els corresponents modificadors d'angle d'incidència dels col·lectors Fresnel. Els resultats demostren que la calor absorbida en els col·lectors mostra una incertesa del 12%, mentre que la calor generada mostra una incertesa del 3%. Per tal de reduir la incertesa inherent al càlcul de la calor absorbida i generada, es va realitzar un estudi per seleccionar sensors i equips de monitoratge més precisos. A més, es va realitzar un treball de camp per a instal·lar els equips seleccionats i més precisos en el camp solar SOLPINVAP. Els resultats de seguiment demostren que la incertesa en la calor absorbida es va reduir en un 79% com a conseqüència de la millora en la instrumentació de mesura. En el marc d'aquest projecte de tesi, es va realitzar una estada de recerca al Departament d'Enginyeria de Mecànica i Metalúrgica de la Pontifícia Universitat Catòlica de Xile, a Santiago. L'equip d'investigació amfitrió ha investigat la potencial aplicació de PBTES sòlids amb escòria de coure, un subproducte del procés pirometal·lúrgic del mineral de coure, com a medi d'emmagatzematge. A més, l'equip d'investigació ha desenvolupat un model matemàtic que simula el procés de transferència de calor i termodinàmica associat al flux d'aire i les partícules sòlides. En conseqüència, el model del sistema PBTES s'ha integrat en el model del sistema SHIP per a l'examen del seu efecte sobre el rendiment del sistema. A més, aquesta tesi examina la dinàmica entre les temperatures dels diferents components del sistema. En conseqüència, aquesta tesi presenta un disseny per a un sistema solar integrat amb sistema PBTES. Els resultats demostren que el sistema amb el PBTES és capaç de generar un 18% més d'energia que el sistema sense el PBTES. A més, es va dur a terme una anàlisi tecnoeconòmica utilitzant el sistema SHIP dissenyat amb PBTES., [EN] The industry sector is responsible for a significant amount of annual carbon emissions, largely due to its high energy consumption and reliance on fossil fuels for heat production. It is therefore evident that the utilisation of alternative and renewable heat sources, such as concentrating solar collectors, represents a promising opportunity for the decarbonisation of this sector. Nevertheless, solar collector systems are dependent on the solar resource, which is an intermittent source of energy. It is therefore necessary to have a thermal energy storage (TES) system to facilitate the storage of surplus energy and its subsequent utilisation when required, thereby ensuring a more consistent heat supply. In order to demonstrate the viability of solar thermal systems for industrial applications, the company Solatom CSP installed an experimental solar field within the SOLPINVAP project. It comprises a series of modular linear Fresnel collectors (LFC) and a kettle reboiler, which is a type of shell and tube heat exchanger. This thesis analyses the performance of the system in Indirect Steam Generation mode. In this mode, heat is absorbed inside the absorber tubes by using a heat transfer fluid, and transferred to the shell of the kettle reboiler, where steam is produced. Additionally, this thesis examines the hydraulic circuits and their components of the experimental solar field, as well as the control system and the monitoring system associated with it. Moreover, it is presented the development of a LFC solar heat for industrial process (SHIP) system model. The model was developed within the object-oriented MATLAB environment. A 3D model of the LFC solar field was developed within the Tonatiuh environment (a ray-tracing software), allowing for an estimation of the peak optical efficiency and the corresponding incidence angle modifiers of the Fresnel collectors. . The results demonstrate that the absorbed heat in the collectors exhibits an uncertainty of 12%, while the generated heat exhibits an uncertainty of 3%. In order to reduce the uncertainty inherent in the calculation of the absorbed and generated heat, a study was conducted to selected more precise sensors and monitoring equipment. Moreover, fieldwork was conducted to install the selected, more precise equipment at the SOLPINVAP solar field. The monitoring results demonstrate that the uncertainty in the absorbed heat was reduced by 79% as a consequence of the improvement in the measurement instrumentation. As part of this thesis project, a research stay was conducted at the Departamento de Ingeniería de Mecánica y Metalúrgica of the Pontificia Universidad Católica de Chile, in Santiago. The host research team has been investigating the potential application of solid PBTES with copper slag, a by-product of the pyrometallurgical process of the copper ore, as a storage medium. Moreover, the research team has developed a mathematical model that simulates the thermodynamic and heat transfer process associated with the airflow and solid particles. Accordingly, the PBTES system model has been integrated into the SHIP system model for examination of its effect on the system performance. Furthermore, this thesis examines the dynamics between the temperatures of the different system components. Consequently, this thesis presents a design for an integrated SHIP with PBTES system. Moreover, it was determined that by modifying the air mass flow and the makeup water flow, the system is capable of maintaining a consistent and uninterrupted heat output throughout the operational duration. The results demonstrate that the system with the PBTES is capable of generating 18% more energy than the system without the PBTES., I would like to thank the Universitat Politècnica de València through the Research and Development Aid Program (PAID-01-20) for receiving the Research Fellowship FPI-UPV-2020. I would also like to acknowledge the "Programa de Movilidad para estudiantes de doctorado" of the Universitat Politècnica de València for providing financial support for my research stay.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Exploring Environmental Risk in Soils: Leveraging Open Data for Non-Sampling Assessment?

  • Aparisi-Navarro, Silvia
  • Candeias, Carla
  • Rocha, Fernando
  • Moncho-Santonja, María|||0000-0001-9520-6981
  • Defez Garcia, Beatriz|||0000-0002-3658-6766
  • Peris Fajarnes, Guillermo|||0000-0001-9215-9091
[EN] Soil contamination by heavy metals (HM) is a critical area of research. Traditional methods involving sample collection and lab analysis are effective but costly and time-consuming. This study explores whether geostatistical analysis with GIS and open data can provide a faster, more precise, and cost-effective alternative for HM contamination assessment without extensive sampling. Concentrations of nine HMs (Cu, Pb, Ni, Co, Mn, As, Cd, Sb, Cr) were analysed from 498 soil samples collected in two mining areas in Portugal: the Panasqueira and Aljustrel mines. Corresponding data were extracted from the Lucas TOPSOIL 1 km raster maps. Several contamination indices, Contamination Factor (Cf), Modified Contamination Degree (mCd), Geoaccumulation Index (Igeo), Nemerow Pollution Index (Pn), Potential Ecological Risk Index (PERI), and Pollution Load Index (PLI) were calculated for both datasets. A confusion matrix was used to evaluate the percentage of correct classifications, while a concordance analysis assessed the alignment of accurately classified points between the two data sources. In the soil samples, very high contamination levels for As were observed in 42% of the samples according to the Cf, with high levels for Sb found in approximately 30% of the samples. The mCd revealed that approximately 11% of soil samples exhibited very high levels of contamination, while the Pn indicated that 78.9% of the soil samples fell within the seriously polluted domain.Similar contamination trends were observed for the other indices. In contrast, the results for the LUCAS points showed significant discrepancies. No high contamination levels were found for any metal. The misclassification rates for mCd, Pn, PERI, and PLI were 84.25%, 97.55%, 95%, and 82%, respectively, when compared to the field data. This study concludes that while open data raster maps offer rapid overviews, they fall short of providing the detailed precision required for reliable contamination assessments. The significant misclassification rates observed highlight the limitations of relying solely on these tools for critical environmental decisions. Consequently, traditional sampling and laboratory analysis remain indispensable for accurate risk assessments of HM contamination, ensuring a more reliable foundation for decision-making and environmental management., This work was supported by Funding for open access charge: Universitat Polit`ecnica de Val`encia". Silvia Aparisi-Navarro was supported by the Research and Development Program (PAID-01-20) of the Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Welfare implications on management strategies for rearing dairy calves: A systematic review. Part 1-feeding management

  • Carulla-Pascual, Patricia
  • Villagrá, Arantxa
  • Blanco-Penedo, Isabel
  • Estellés, F.|||0000-0001-6774-6075
[EN] Introduction: Calves are very susceptible to stress in the early stages of life, and it is necessary to ensure maximum welfare. Feeding management has been identified as a major risk factor for calf health and welfare at this stage. However, the management protocol for calf rearing and its impact on animal welfare is unclear. A systematic review of different management strategies for rearing dairy calves according to the three spheres of animal welfare was conducted using an electronic search strategy. In this review, management strategies were studied to identify scientific gaps, to know the welfare problems of these animals in order to prioritize actions and future research and to study the interpretive approach of this management from the three welfare spheres.Methods: A protocol was used to analyze and extract information from the studies. Of the 1,783 publications screened, only 351 met the inclusion criteria for the management or welfare of calves' items.Results: The publications identified in the search can be divided into two main groups feeding and socialization, based on the main topic of the publication. The main topics that emerged from the search in the feeding management group were milk replacer, colostrum, and weaning, divided into the three main areas of biological functioning and health, natural life and affective states or cognitive judgement.Discussion: The main issues to be addressed were the different types of feed consumed by animals from birth to weaning and the weaning management. It has been found that the most researched issues are colostrum and solid starter feed management. Unresolved issues were highlighted, such as the lack of a clear protocol for the administration of milk replacers to reduce hunger and the best management of weaning to reduce stress., This research was supported by Centro para el Desarrollo Tecnologico Industrial and Cowvet S.L. by project CDTI-IDI-20200936. In addition, PC held a grant from the Ph.D. student's research program of the Universitat Politecnica de Valencia (PAID-01-20). The authors thank the Swedish University of Agricultural Sciences and the Department of Clinical Sciences for facilitating access to databases analyzed in this study.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of Milk-Feeding Frequency and Calcium Gluconate Supplementation on Growth, Health, and Reproductive and Metabolic Features of Holstein Heifers at a Rearing Farm

  • Revilla-Ruiz, Ángel
  • Carulla-Pascual, Patricia
  • Fernandez-Novo, Aitor
  • De Mercado, Eduardo
  • Perez-Navarro, Alejandro
  • Patron-Collantes, Raquel
  • Pérez-Garnelo, Sonia S.
  • González-Martín, Juan V.
  • Villagrá, Arantxa
  • Astiz, Susana
  • Izquierdo Sebastián, Francisco Javier
  • Estellés, F.|||0000-0001-6774-6075
[EN] We compared the effects of milk-feeding in 288 Holstein calves (72 per group) which were fed twice (2F) or thrice (3F) daily, with or without the addition of hydrogenated fat-embedded calcium gluconate (G) supplemented in the starter food and in the daily diet up to the age of 9 months, on the calves' metabolism, growth, health, and reproductive efficiency up to first pregnancy. The calves received 6 L of milk replacer (130 g/L) and had ad libitum access to water and textured calf starter with or without gluconate. Gluconate supplementation promoted a "catch-up" in growth in supplemented calves compared to their counterparts that did not receive gluconate. Gluconate appeared to reduce animal metabolic stress during key events, such as weaning and transfer into open-door pens, reducing fructosamine (352.61 vs. 303.06 in 3FG and 3F, respectively; p = 0.028) and urea (3F revealed the highest values compared with the other three groups: 19.06 for 3F vs. 13.9 (2F), 13.7 (2FG), and 14.3 (3FG), respectively, p = 0.002) from weaning onwards. The feeding of dairy calves with milk replacer three rather than two times per day tended to be associated with better health from weaning to 4 months old; parameters such as ultrasound lung score and calf health score improved over time (p < 0.001). Thrice-daily feeding with milk replacer tended to reduce the number of artificial inseminations per pregnancy in heifers by 0.2 points (p = 0.092). We confirmed significant correlations between early health and growth parameters and reproductive efficiency and a positive correlation between body weight and average daily weight gain and the thickness of the back fat layer in young heifers (r = 0.245; p < 0.0001; r = 0.214; p < 0.0001 respectively). Our study was conducted on a commercial farm with reasonably effective animal management, so baseline welfare was likely satisfactory., This work was funded by the "Centro para el Desarrollo Tecnologico Industrial" of the Spanish Ministry of Science and Innovation (grant CDTI-IDI-20200936). Patricia Carulla received a grant from Universitat Politecnica de Valencia through the program PAID-01-20. The funders had no role in the study design, data collection or analysis, manuscript preparation, or in the decision to publish the results.