Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 26
Encontrada(s) 1 página(s)

Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Corrosion Assessment of Myo-Inositol Sugar Alcohol as a Phase Change Material in Storage Systems Connected to Fresnel Solar Plants

  • Maldonado, José Miguel
  • Fernández, Ángel G.
  • Cabeza, Luisa F.
Thermal energy storage systems work in conjunction with solar technologies with the aim of increasing their dispatchability and competitiveness in the energy market. Among others, latent heat thermal energy storage systems have become an appealing research subject and many efforts have therefore been invested in selecting the best phase change material (PCM) to fit the final application. In this study, an extended corrosion characterization was performed for two PCM candidates, solar salt (40 wt.% KNO3/60 wt.% NaNO3) and myo-inositol (C6H12O6), to be applied in Fresnel solar plants. Corrosion rates were determined in aluminium, stainless steel (AISI 304), carbon steel (AISI 1090), and copper by gravimetric tests, gauging the weight loss after 2000 h of immersion at 250 ºC. The corrosion products were characterized by scanning electron microscopy (SEM) and x-ray diffraction (XRD). The corrosion tests carried out with myo-inositol did not show accurate enough results to draw conclusions regarding corrosion on the metals. However, it was observed that this sugar alcohol strongly sticks to the metal specimens, making myo-inositol extremely difficult to manage as an energy storage material. Therefore, the present paper discourages the use of myo-inositol as a PCM beyond its corrosion rate., Funding: The research received funding from Spanish government (MINECO/FEDER), grant number ENE2015-64117-C5-1-R. This work was partially funded by the European Union´s Horizon 2020 Research & Innovation Programme under Grant Agreement 723596 with reference name Innova MicroSolar. José Miguel Maldonado received funding from the Spanish Government for his research fellowship, grant number BES-2016-076554. Ángel G. Fernández has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 712949 (TECNIOspring PLUS) and from the Agency for Business Competitiveness of the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme. Acknowledgments: The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREiA (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Measuring user relevance in online debates through an argumentative model

  • Alsinet, Teresa
  • Argelich Romà, Josep
  • Béjar Torres, Ramón
  • Martínez Rodríguez, Santi
Online debating forums are important social media for people to voice their opinions and engage in debates with each other. Measuring user relevance on these forums can be useful to identify different user profiles or behaviors in online debates, for example, users that tend to participate at the beginning of a debate and whose comments trigger participation, or users that post relevant comments but are not replied too much. To help users to distinguish such different user profiles, we propose graded measures based on users’ influence, the controversy that they generate throughout the debates, their contribution to the polarization of the debates, and their social acceptance, that we extract by analyzing the debates in which the users participate. Our approach is based on an argumentation-based analysis that represents a debate as a valued argumentation framework, in which comments of a debate are arguments, the attack relation between arguments models disagreement between comments, and values for arguments represent the overall support of users for comments. Finally, we test our measures with a sample of users from Reddit debates, identifying four main groups of users, from users with almost no impact on the debate to very active ones with decisive comments for the outcome of the debate., This work was partially funded by Spanish Project TIN2015-71799-C2-2-P (MINECO/FEDER), by the European Union’s Horizon 2020 Research and Innovation Program under Grant Agreements 723596, 768824, 764025 and 814945, and by 2017 SGR 1537. The authors would like to thank anonymous reviewers for providing helpful comments.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Phase Change Material Selection for Thermal Energy Storage at High Temperature Range between 210 ºC and 270 ºC

  • Maldonado, José Miguel
  • Fullana Puig, Margalida
  • Martín, Marc
  • Solé, Aran
  • Fernández, Ángel G.
  • Gracia Cuesta, Alvaro de
  • Cabeza, Luisa F.
The improvement of thermal energy storage systems implemented in solar technologies increases not only their performance but also their dispatchability and competitiveness in the energy market. Latent heat thermal energy storage systems are one of those storing methods. Therefore, the need of finding the best materials for each application becomes an appealing research subject. The main goal of this paper is to find suitable and economically viable materials able to work as phase change material (PCM) within the temperature range of 210-270 ºC and endure daily loading and unloading processes in a system with Fresnel collector and an organic Rankine cycle (ORC). Twenty-six materials have been tested and characterized in terms of their thermophysical conditions, thermal and cycling stability, and health hazard. Two materials out of the 26 candidates achieved the last stage of the selection process. However, one of the two finalists would require an inert working atmosphere, which would highly increase the cost for the real scale application. This leads to a unique suitable material, solar salt (40 wt % KNO3/60 wt % NaNO3)., This work was partially funded by the European Union’s Horizon 2020 Research & Innovation Programme under Grant Agreement 723596 with reference name Innova MicroSolar. This work was partially funded by the Ministerio de Economía y Competitividad de España (ENE2015-64117-C5-1-R (MINECO/FEDER) and ENE2015-64117-C5-3-R (MINECO/FEDER)). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. José Miguel Maldonado would like to thank the Spanish Government for his research fellowship (BES-2016-076554). Aran Solé would like to thank Ministerio de Economía y Competitividad de España for Grant Juan de la Cierva, FJCI-2015-25741. Alvaro de Gracia has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 712949. Angel G. Fernández would like to acknowledge the financial support provided by GIZ “Programa de pasantía en el extranjero en tecnologías de concentración solar para investigadores” and CONICYT/FONDAP 15110019 “Solar Energy Research Center” SERC-Chile.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Multi-Country Analysis on Energy Savings in Buildings by Means of a Micro-Solar Organic Rankine Cycle System: A Simulation Study

  • Arteconi, Alessia
  • Del Zotto, Luca
  • Tascioni, Roberto
  • Mahkamov, Khamid
  • Underwood, Chris
  • Cabeza, Luisa F.
  • Maldonado, José Miguel
  • Manca, Roberto
  • Mintsa, André Charles
  • Bartolini, Carlo M.
  • Gimbernat, Toni
  • Botargues, Teresa
  • Halimic, Elvedin
  • Cioccolanti, Luca
In this paper, the smart management of buildings energy use by means of an innovative renewable micro-cogeneration system is investigated. The system consists of a concentrated linear Fresnel reflectors solar field coupled with a phase change material thermal energy storage tank and a 2 kWe/18 kWth organic Rankine cycle (ORC) system. The microsolar ORC was designed to supply both electricity and thermal energy demand to residential dwellings to reduce their primary energy use. In this analysis, the achievable energy and operational cost savings through the proposed plant with respect to traditional technologies (i.e., condensing boilers and electricity grid) were assessed by means of simulations. The influence of the climate and latitude of the installation was taken into account to assess the performance and the potential of such system across Europe and specifically in Spain, Italy, France, Germany, U.K., and Sweden. Results show that the proposed plant can satisfy about 80% of the overall energy demand of a 100 m2 dwelling in southern Europe, while the energy demand coverage drops to 34% in the worst scenario in northern Europe. The corresponding operational cost savings amount to 87% for a dwelling in the south and at 33% for one in the north., This research was funded by European Union’s Horizon 2020 Research and Innovation Programme, grant number 723596. The APC was waived for this invited paper
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Development of a Small Solar Thermal Power Plant for Heat and Power Supply to Domestic and Small Business Buildings

  • Mahkamov, Khamid
  • Pili, Piero
  • Manca, Roberto
  • Leroux, Arthur
  • Mintsa, André Charles
  • Lynn, Kevin
  • Mullen, David
  • Halimic, Elvedin
  • Bartolini, Carlo M.
  • Pirro, Matteo
  • Costa, Sol-Carolina
  • Cabeza, Luisa F.
  • Gracia Cuesta, Alvaro de
  • Kenisarin, Murat
  • Makhkamova, Irina
The small solar thermal power plant is being developed with funding from EU Horizon 2020 Program. The plant is configured around a 2-kWel Organic Rankine Cycle turbine and solar field, made of Fresnel mirrors. The solar field is used to heat thermal oil to the temperature of about 240 oC. This thermal energy is used to run the Organic Rankine Cycle turbine and the heat rejected in its condenser (about 18-kWth) is utilized for hot water production and living space heating. The plant is equipped with a latent heat thermal storage to extend its operation by about 4 hours during the evening building occupancy period. The phase change material used is Solar salt with the melting/solidification point at about 220 oC. The total mass of the PCM is about 3,800 kg and the thermal storage capacity is about 100 kWh. The operation of the plant is monitored by a central controller unit. The main components of the plant are being manufactured and laboratory tested with the aim to assemble the plant at the demonstration site, located in Catalonia, Spain. At the first stage of investigations the ORC turbine will be directly integrated with the solar filed to evaluate their joint performance. During the second stage of tests, the Latent Heat Thermal Storage will be incorporated into the plant and its performance during the charging and discharging processes will be investigated. It is planned that the continuous filed tests of the whole plant will be performed during the 2018- 2019 period., This study was funded by European Union’s Horizon 2020 Research and Innovation Program under Project Grant Agreement 723596 (Innova MicroSolar).
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Approximate and Optimal Solutions for the Bipartite Polarization Problem

  • Alsinet, Teresa
  • Argelich Romà, Josep
  • Béjar Torres, Ramón
  • Martínez Rodríguez, Santi
In a recent work we introduced a problem about finding the highest polarized bipartition on a weighted and labeled graph that represents a debate developed trough some social network, where nodes represent user’s opinions and edges agreement or disagreement between users. Finding this target bipartition is an optimization problem that can be seen as a generalization of the maxcut problem, so we first introduced a basic local search algorithm to find approximate solutions of the problem. In this paper we go one step further, and we present an exact algorithm for finding the optimal solution, based on an integer programming formulation, and compare the performance of a new variant of our local search algorithm with the exact algorithm. Our results show that at least on real instances of the problem, obtained from Reddit debates, the approximate solutions obtained are almost always identical to the optimal solutions., This work was partially funded by Spanish Project PID2019- 111544GB-C22 (MINECO / FEDER), by the European Union’s Horizon 2020 Research and Innovation Program under Grant Agreements 723596, 768824, 764025 and 814945, and by 2017 SGR 1537.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Systematic review on the use of heat pipes in latent heat thermal energy storage tanks

  • Maldonado, José Miguel
  • Gracia Cuesta, Alvaro de
  • Cabeza, Luisa F.
This systematic review presents and discusses the previous research about hybrid devices which combine latent thermal energy storage (TES) technology and heat pipes. A bibliometric analysis of this issue shows how hybrid systems have globally grown popularity during time, providing details about the main researchers and research centres on this particular field. Then, the identified papers are assessed and categorized in two main sections, the experimental research carried out, and the numerical modelling of hybrid systems. Experimental research is later classified regarding the operating temperature range, and their final application. Numerical studies are also further categorized, accordingly to how heat pipes were modelled in this case. This review points out the lack of experimental studies at high temperatures, especially when many simulations extended their models (validated at low temperatures) to higher temperature designs. The paper provides details about the research performed, so the gap for future investigations can be spotted., This work was partially funded by the European Union's Horizon 2020 Research & Innovation Programme under Grant Agreement 723596 with reference name Innova MicroSolar. This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE) and by the Agencia Estatal de Investigación (AEI), of the Ministerio de Ciencia, Innovación y Universidades (RED2018-102431-T). José Miguel Maldonado would like to thank the Spanish Government for his research fellowship (BES-2016-076554). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is a certified TECNIO agent in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Development of a smart control unit for small-scale concentrated solar combined heat and power systems for residential applications

  • Cioccolanti, Luca
  • Tascioni, Roberto
  • Moradi, Ramin
  • Pirro, Matteo
  • Bartolini, Carlo M.
  • Makhkamova, Irina
  • Mahkamov, Khamid
  • Cabeza, Luisa F.
  • Gracia Cuesta, Alvaro de
  • Pili, Piero
  • Mintsa, André Charles
  • Mullen, David
Solar energy has a significant potential for future power generation but its intermittent and variable nature results in fluctuations of the operational performance of solar power plants. Despite thermal energy storage (TES) systems improving the flexibility and the sustainability of the performance of Concentrated Solar Power (CSP) plants, smart management is required to deal with the complex dynamic variations in the behaviour and interaction of the different plant's subsystems. In this paper, the design, manufacture, and validation of a smart control unit with extended capabilities for a small-scale CSP combined heat and power (CHP) system are described. More precisely, the control unit has been designed to control and optimise the operation of a microscale Organic Rankine Cycle (ORC) unit coupled with Linear Fresnel Reflectors solar field and an advanced latent heat thermal energy storage tank which were developed by a consortium of universities and companies in the framework of the EU-funded project 'Innova Microsolar'. In parallel to the designing and building the smart control unit, an advanced simulator has been developed in Matlab/Simulink® to investigate the performance of the plant for a wide range of varying ambient and operating conditions. The simulation framework has been connected to the real control unit according to a hardware-in-the-loop (HiL) approach to optimise the control logic of the integrated plant to overcome potential technical and reliability issues during the commissioning of the plant. The developed hardware and the proposed scientific approach can be extended to a wide range of complex solar energy systems equipped with TES and to be integrated into the built environment., This study is a part of the Innova Microsolar Project, funded in the framework of the European Union's Horizon 2020 Research and Innovation Programme (Grant Agreement No 723596). The authors at the University of Lleida would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Measuring Polarization in Online Debates

  • Alsinet, Teresa
  • Argelich Romà, Josep
  • Béjar Torres, Ramón
  • Martínez Rodríguez, Santi
Social networks can be a very successful tool to engage users to discuss relevant topics for society. However, there are also some dangers that are associated with them, such as the emergence of polarization in online discussions. Recently, there has been a growing interest to try to understand this phenomenon, as some consider that this can be harmful concerning the building of a healthy society in which citizens get used to polite discussions and even listening to opinions that may be different from theirs. In this work, we face the problem of defining a precise measure that can quantify in a meaningful way the level of polarization present in an online discussion. We focus on the Reddit social network, given that its primary focus is to foster discussions, in contrast to other social networks that have some other uses. Our measure is based on two different characteristics of an online discussion: the existence of a balanced bipartition of the users of the discussion, where one partition contains mainly users in agreement (regarding the topic of the discussion) and the other users in disagreement, and the degree of negativity of the sentiment of the interactions between these two groups of users. We discuss how different characteristics of the discussions affect the value of our polarization measure, and we finally perform an empirical evaluation over different sets of Reddit discussions about diverse classes of topics. Our results seem to indicate that our measure can capture differences in the polarization level of different discussions, which can be further understood when analyzing the values of the different factors used to define the measure., This research was funded by Spanish Project PID2019-111544GB-C22 (MINECO/FEDER), by the European Union’s Horizon 2020 Research and Innovation Program under Grant Agreements 723596, 768824, 764025 and 814945, and by 2017 SGR 1537.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Comparative Analysis of Energy Demand and CO2 Emissions on Different Typologies of Residential Buildings in Europe

  • Coma Arpón, Julià
  • Maldonado, José Miguel
  • Gracia Cuesta, Alvaro de
  • Gimbernat, Toni
  • Botargues, Teresa
  • Cabeza, Luisa F.
The building sector accounts for one third of the global energy consumption and it is expected to grow in the next decades. This evidence leads researchers, engineers and architects to develop innovative technologies based on renewable energies and to enhance the thermal performance of building envelopes. In this context, the potential applicability and further energy performance analysis of these technologies when implemented into different building typologies and climate conditions are not easily comparable. Although massive information is available in data sources, the lack of standardized methods for data gathering and the non-public availability makes the comparative analyses more diffcult. These facts limit the benchmarking of different building energy demand parameters such as space heating, cooling, air conditioning, domestic hot water, lighting and electric appliances. Therefore, the first objective of this study consists in providing a review about the common typologies of residential buildings in Europe from the main data sources. This study contains specific details on their architecture, building envelope, floor space and insulation properties. The second objective consists in performing a cross-country comparison in terms of energy demand for the applications with higher energy requirements in the residential building sector (heating and domestic hot water), as well as their related CO2 emissions. The approach of this comparative analysis is based on the residential building typology developed in TABULA/EPISCOPE projects. This comparative study provides a reference scenario in terms of energy demand and CO2 emissions for residential buildings and allows to evaluate the potential implementation of new supply energy technologies in hot, temperate and cold climate regions. From this study it was also concluded that there is a necessity of a free access database which could gather and classify reliable energy data in buildings., This study has received funding from European Union’s Horizon 2020 research and innovation programme under grant agreement Nº723596 (Innova MicroSolar). The work is partially funded by the Spanish government (RTI2018-093849-B-C31). Julià Coma would like to thank Ministerio de Economía y Competitividad de España for Grant Juan de la Cierva, FJCI-2016-30345. José Miguel Maldonado would like to thank the Spanish Government for his research fellowship (BES-2016-076554). This work is partially supported by ICREA under the ICREA Academia programme.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Implementing SDGs to a Sustainable Rural Village Development from Community Empowerment: Linking Energy, Education, Innovation, and Research

  • Arco Bravo, Isabel del
  • Ramos Pla, Anabel
  • Zsembinszki, Gabriel
  • Gracia Cuesta, Alvaro de
  • Cabeza, Luisa F.
Rural depopulation is a worldwide fact and has a domino effect on medium and small cities, which act as a nucleus of reference for small towns. Moreover, the United Nations (UN) stressed that disparities between rural and urban areas are pronounced and still growing over time. Globally, people in rural areas lack access to modern energy services, which affects productivity, educational and health services, exacerbating poverty, among other things. Given this reality, the following research questions arise: how can we act to reverse this reality? Are there examples of transformation in rural contexts where community empowerment is a key strategy? This paper aims at describing the transformation process of a small rural municipality towards a sustainable development, in parallel to the activation of the local productivity that helps to eliminate the effects of rural depopulation. Therefore, the project ALMIA was established as an example of a sustainable village that is Almatret (Catalonia-Spain). The backbone of such project is the commitment to community impowerment, where the main results are the generation of networks with experts and researchers to help the municipality's energy transition, the involvement of the local administration, the commitment to technological development, as well as the socio-community development. Moreover, the activities developed within the project ALMIA are aligned with the UNs Sustainable Development Goals, alignment that is analyzed in detail. Thus, this paper aims to further highlight existing sustainable development practices related to community empowerment in order to promote similar practices., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 768824 and under the grant agreement No 723596. This work is partially supported by ICREA under the ICREA Academia programme. The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. The authors would like to thank the Almatret municipality for their involvement in this challenging project.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Simulation analysis of an innovative micro-solar 2kWe Organic Rankine Cycle plant coupled with a multi-apartments building for domestic hot water supply

  • Arteconi, Alessia
  • Del Zotto, Luca
  • Tascioni, Roberto
  • Mahkamov, Khamid
  • Underwood, Chris
  • Cabeza, Luisa F.
  • Gracia Cuesta, Alvaro de
  • Pili, Piero
  • Mintsa, André Charles
  • Bartolini, Carlo M.
  • Gimbernat, Toni
  • Botargues, Teresa
  • Halimic, Elvedin
  • Cioccolanti, Luca
Combined heat and power plants driven by renewable energy sources (RES) are becoming more and more popular, given the energy transition towards the integration of more renewable energy sources in the power generation mix. In this paper an innovative micro-solar 2kWe/18kWth Organic Rankine Cycle system, which is being developed by the consortium of several Universities and industrial organizations, with the funding from EU under the Innova MicroSolar project, is considered. In particular, its application to supply electricity and thermal energy for Domestic Hot Water (DHW) in a residential building is investigated by means of simulation analysis. Different Domestic Hot Water supply plant configurations are evaluated and the design parameters are varied in order to determine the best configuration to recover as much energy as possible from the ORC, while maintaining the final users' comfort. It was found out that with the considered plant around 67% of the Domestic Hot Water energy demand of 15 apartments can be satisfied with a water storage tank of 10'000 liters. However, in order to always guarantee the supply water temperature, a back-up boiler, which serves directly the final users when needed, is requested., This study is a part of the Innova MicroSolar Project, funded in the framework of the European Union’s Horizon 2020 Research and Innovation Programme (grant agreement No 723596).
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Comparative analysis of energy demand and CO2 emissions on diff erent typologies of residential buildings in Europe

  • Coma Arpón, Julià|||0000-0002-1750-661X
  • Maldonado, José Miguel
  • De Gracia Cuesta, Alvaro
  • Gimbernat, Toni
  • Botargues, Teresa
  • Cabeza Fabra, Luisa Fernanda
The building sector accounts for one third of the global energy consumption and it is expected to grow in the next decades. This evidence leads researchers, engineers and architects to develop innovative technologies based on renewable energies and to enhance the thermal performance of building envelopes. In this context, the potential applicability and further energy performance analysis of these technologies when implemented into different building typologies and climate conditions are not easily comparable. Although massive information is available in data sources, the lack of standardized methods for data gathering and the non-public availability makes the comparative analyses more difficult. These facts limit the benchmarking of different building energy demand parameters such as space heating, cooling, air conditioning, domestic hot water, lighting and electric appliances. Therefore, the first objective of this study consists in providing a review about the common typologies of residential buildings in Europe from the main data sources. This study contains specific details on their architecture, building envelope, floor space and insulation properties. The second objective consists in performing a cross-country comparison in terms of energy demand for the applications with higher energy requirements in the residential building sector (heating and domestic hot water), as well as their related CO2 emissions. The approach of this comparative analysis is based on the residential building typology developed in TABULA/EPISCOPE projects. This comparative study provides a reference scenario in terms of energy demand and CO2 emissions for residential buildings and allows to evaluate the potential implementation of new supply energy technologies in hot, temperate and cold climate regions. From this study it was also concluded that there is a necessity of a free access database which could gather and classify reliable energy data in buildings., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Comparative analysis of energy demand and CO2 emissions on diff erent typologies of residential buildings in Europe

  • Coma Arpón, Julià
  • Maldonado, José Miguel
  • De Gracia Cuesta, Alvaro
  • Gimbernat, Toni
  • Botargues, Teresa
  • Cabeza Fabra, Luisa Fernanda
The building sector accounts for one third of the global energy consumption and it is expected to grow in the next decades. This evidence leads researchers, engineers and architects to develop innovative technologies based on renewable energies and to enhance the thermal performance of building envelopes. In this context, the potential applicability and further energy performance analysis of these technologies when implemented into different building typologies and climate conditions are not easily comparable. Although massive information is available in data sources, the lack of standardized methods for data gathering and the non-public availability makes the comparative analyses more difficult. These facts limit the benchmarking of different building energy demand parameters such as space heating, cooling, air conditioning, domestic hot water, lighting and electric appliances. Therefore, the first objective of this study consists in providing a review about the common typologies of residential buildings in Europe from the main data sources. This study contains specific details on their architecture, building envelope, floor space and insulation properties. The second objective consists in performing a cross-country comparison in terms of energy demand for the applications with higher energy requirements in the residential building sector (heating and domestic hot water), as well as their related CO2 emissions. The approach of this comparative analysis is based on the residential building typology developed in TABULA/EPISCOPE projects. This comparative study provides a reference scenario in terms of energy demand and CO2 emissions for residential buildings and allows to evaluate the potential implementation of new supply energy technologies in hot, temperate and cold climate regions. From this study it was also concluded that there is a necessity of a free access database which could gather and classify reliable energy data in buildings., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Simulation analysis of an innovative micro-solar 2kWe Organic Rankine Cycle plant coupled with a multi-apartments building for domestic hot water supply

  • Arteconi, Alessia
  • Del Zotto, Luca
  • Tascioni, Roberto
  • Mahkamov, Khamid
  • Underwood, Chris
  • Cabeza, Luisa F.
  • Gracia Cuesta, Alvaro de
  • Pili, Piero
  • Mintsa, André Charles
  • Bartolini, Carlo M.
  • Gimbernat, Toni
  • Botargues, Teresa
  • Halimic, Elvedin
  • Cioccolanti, Luca
Combined heat and power plants driven by renewable energy sources (RES) are becoming more and more popular, given the energy transition towards the integration of more renewable energy sources in the power generation mix. In this paper an innovative micro-solar 2kWe/18kWth Organic Rankine Cycle system, which is being developed by the consortium of several Universities and industrial organizations, with the funding from EU under the Innova MicroSolar project, is considered. In particular, its application to supply electricity and thermal energy for Domestic Hot Water (DHW) in a residential building is investigated by means of simulation analysis. Different Domestic Hot Water supply plant configurations are evaluated and the design parameters are varied in order to determine the best configuration to recover as much energy as possible from the ORC, while maintaining the final users' comfort. It was found out that with the considered plant around 67% of the Domestic Hot Water energy demand of 15 apartments can be satisfied with a water storage tank of 10'000 liters. However, in order to always guarantee the supply water temperature, a back-up boiler, which serves directly the final users when needed, is requested., This study is a part of the Innova MicroSolar Project, funded in the framework of the European Union’s Horizon 2020 Research and Innovation Programme (grant agreement No 723596).
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Phase Change Material Selection for Thermal Energy Storage at High Temperature Range between 210 ºC and 270 ºC

  • Maldonado, José Miguel
  • Fullana Puig, Margalida
  • Martín, Marc
  • Solé, Aran
  • Fernández, Ángel G.
  • Gracia Cuesta, Alvaro de
  • Cabeza, Luisa F.
The improvement of thermal energy storage systems implemented in solar technologies increases not only their performance but also their dispatchability and competitiveness in the energy market. Latent heat thermal energy storage systems are one of those storing methods. Therefore, the need of finding the best materials for each application becomes an appealing research subject. The main goal of this paper is to find suitable and economically viable materials able to work as phase change material (PCM) within the temperature range of 210-270 ºC and endure daily loading and unloading processes in a system with Fresnel collector and an organic Rankine cycle (ORC). Twenty-six materials have been tested and characterized in terms of their thermophysical conditions, thermal and cycling stability, and health hazard. Two materials out of the 26 candidates achieved the last stage of the selection process. However, one of the two finalists would require an inert working atmosphere, which would highly increase the cost for the real scale application. This leads to a unique suitable material, solar salt (40 wt % KNO3/60 wt % NaNO3)., This work was partially funded by the European Union’s Horizon 2020 Research & Innovation Programme under Grant Agreement 723596 with reference name Innova MicroSolar. This work was partially funded by the Ministerio de Economía y Competitividad de España (ENE2015-64117-C5-1-R (MINECO/FEDER) and ENE2015-64117-C5-3-R (MINECO/FEDER)). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. José Miguel Maldonado would like to thank the Spanish Government for his research fellowship (BES-2016-076554). Aran Solé would like to thank Ministerio de Economía y Competitividad de España for Grant Juan de la Cierva, FJCI-2015-25741. Alvaro de Gracia has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 712949. Angel G. Fernández would like to acknowledge the financial support provided by GIZ “Programa de pasantía en el extranjero en tecnologías de concentración solar para investigadores” and CONICYT/FONDAP 15110019 “Solar Energy Research Center” SERC-Chile.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Corrosion Assessment of Myo-Inositol Sugar Alcohol as a Phase Change Material in Storage Systems Connected to Fresnel Solar Plants

  • Maldonado, José Miguel
  • Fernández, Ángel G.
  • Cabeza, Luisa F.
Thermal energy storage systems work in conjunction with solar technologies with the aim of increasing their dispatchability and competitiveness in the energy market. Among others, latent heat thermal energy storage systems have become an appealing research subject and many efforts have therefore been invested in selecting the best phase change material (PCM) to fit the final application. In this study, an extended corrosion characterization was performed for two PCM candidates, solar salt (40 wt.% KNO3/60 wt.% NaNO3) and myo-inositol (C6H12O6), to be applied in Fresnel solar plants. Corrosion rates were determined in aluminium, stainless steel (AISI 304), carbon steel (AISI 1090), and copper by gravimetric tests, gauging the weight loss after 2000 h of immersion at 250 ºC. The corrosion products were characterized by scanning electron microscopy (SEM) and x-ray diffraction (XRD). The corrosion tests carried out with myo-inositol did not show accurate enough results to draw conclusions regarding corrosion on the metals. However, it was observed that this sugar alcohol strongly sticks to the metal specimens, making myo-inositol extremely difficult to manage as an energy storage material. Therefore, the present paper discourages the use of myo-inositol as a PCM beyond its corrosion rate., Funding: The research received funding from Spanish government (MINECO/FEDER), grant number ENE2015-64117-C5-1-R. This work was partially funded by the European Union´s Horizon 2020 Research & Innovation Programme under Grant Agreement 723596 with reference name Innova MicroSolar. José Miguel Maldonado received funding from the Spanish Government for his research fellowship, grant number BES-2016-076554. Ángel G. Fernández has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 712949 (TECNIOspring PLUS) and from the Agency for Business Competitiveness of the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme. Acknowledgments: The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREiA (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Measuring Polarization in Online Debates

  • Alsinet, Teresa
  • Argelich Romà, Josep
  • Béjar Torres, Ramón
  • Martínez Rodríguez, Santi
Social networks can be a very successful tool to engage users to discuss relevant topics for society. However, there are also some dangers that are associated with them, such as the emergence of polarization in online discussions. Recently, there has been a growing interest to try to understand this phenomenon, as some consider that this can be harmful concerning the building of a healthy society in which citizens get used to polite discussions and even listening to opinions that may be different from theirs. In this work, we face the problem of defining a precise measure that can quantify in a meaningful way the level of polarization present in an online discussion. We focus on the Reddit social network, given that its primary focus is to foster discussions, in contrast to other social networks that have some other uses. Our measure is based on two different characteristics of an online discussion: the existence of a balanced bipartition of the users of the discussion, where one partition contains mainly users in agreement (regarding the topic of the discussion) and the other users in disagreement, and the degree of negativity of the sentiment of the interactions between these two groups of users. We discuss how different characteristics of the discussions affect the value of our polarization measure, and we finally perform an empirical evaluation over different sets of Reddit discussions about diverse classes of topics. Our results seem to indicate that our measure can capture differences in the polarization level of different discussions, which can be further understood when analyzing the values of the different factors used to define the measure., This research was funded by Spanish Project PID2019-111544GB-C22 (MINECO/FEDER), by the European Union’s Horizon 2020 Research and Innovation Program under Grant Agreements 723596, 768824, 764025 and 814945, and by 2017 SGR 1537.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Comparative Analysis of Energy Demand and CO2 Emissions on Different Typologies of Residential Buildings in Europe

  • Coma Arpón, Julià
  • Maldonado, José Miguel
  • Gracia Cuesta, Alvaro de
  • Gimbernat, Toni
  • Botargues, Teresa
  • Cabeza, Luisa F.
The building sector accounts for one third of the global energy consumption and it is expected to grow in the next decades. This evidence leads researchers, engineers and architects to develop innovative technologies based on renewable energies and to enhance the thermal performance of building envelopes. In this context, the potential applicability and further energy performance analysis of these technologies when implemented into different building typologies and climate conditions are not easily comparable. Although massive information is available in data sources, the lack of standardized methods for data gathering and the non-public availability makes the comparative analyses more diffcult. These facts limit the benchmarking of different building energy demand parameters such as space heating, cooling, air conditioning, domestic hot water, lighting and electric appliances. Therefore, the first objective of this study consists in providing a review about the common typologies of residential buildings in Europe from the main data sources. This study contains specific details on their architecture, building envelope, floor space and insulation properties. The second objective consists in performing a cross-country comparison in terms of energy demand for the applications with higher energy requirements in the residential building sector (heating and domestic hot water), as well as their related CO2 emissions. The approach of this comparative analysis is based on the residential building typology developed in TABULA/EPISCOPE projects. This comparative study provides a reference scenario in terms of energy demand and CO2 emissions for residential buildings and allows to evaluate the potential implementation of new supply energy technologies in hot, temperate and cold climate regions. From this study it was also concluded that there is a necessity of a free access database which could gather and classify reliable energy data in buildings., This study has received funding from European Union’s Horizon 2020 research and innovation programme under grant agreement Nº723596 (Innova MicroSolar). The work is partially funded by the Spanish government (RTI2018-093849-B-C31). Julià Coma would like to thank Ministerio de Economía y Competitividad de España for Grant Juan de la Cierva, FJCI-2016-30345. José Miguel Maldonado would like to thank the Spanish Government for his research fellowship (BES-2016-076554). This work is partially supported by ICREA under the ICREA Academia programme.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Measuring user relevance in online debates through an argumentative model

  • Alsinet, Teresa
  • Argelich Romà, Josep
  • Béjar Torres, Ramón
  • Martínez Rodríguez, Santi
Online debating forums are important social media for people to voice their opinions and engage in debates with each other. Measuring user relevance on these forums can be useful to identify different user profiles or behaviors in online debates, for example, users that tend to participate at the beginning of a debate and whose comments trigger participation, or users that post relevant comments but are not replied too much. To help users to distinguish such different user profiles, we propose graded measures based on users’ influence, the controversy that they generate throughout the debates, their contribution to the polarization of the debates, and their social acceptance, that we extract by analyzing the debates in which the users participate. Our approach is based on an argumentation-based analysis that represents a debate as a valued argumentation framework, in which comments of a debate are arguments, the attack relation between arguments models disagreement between comments, and values for arguments represent the overall support of users for comments. Finally, we test our measures with a sample of users from Reddit debates, identifying four main groups of users, from users with almost no impact on the debate to very active ones with decisive comments for the outcome of the debate., This work was partially funded by Spanish Project TIN2015-71799-C2-2-P (MINECO/FEDER), by the European Union’s Horizon 2020 Research and Innovation Program under Grant Agreements 723596, 768824, 764025 and 814945, and by 2017 SGR 1537. The authors would like to thank anonymous reviewers for providing helpful comments.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Approximate and Optimal Solutions for the Bipartite Polarization Problem

  • Alsinet, Teresa
  • Argelich Romà, Josep
  • Béjar Torres, Ramón
  • Martínez Rodríguez, Santi
In a recent work we introduced a problem about finding the highest polarized bipartition on a weighted and labeled graph that represents a debate developed trough some social network, where nodes represent user’s opinions and edges agreement or disagreement between users. Finding this target bipartition is an optimization problem that can be seen as a generalization of the maxcut problem, so we first introduced a basic local search algorithm to find approximate solutions of the problem. In this paper we go one step further, and we present an exact algorithm for finding the optimal solution, based on an integer programming formulation, and compare the performance of a new variant of our local search algorithm with the exact algorithm. Our results show that at least on real instances of the problem, obtained from Reddit debates, the approximate solutions obtained are almost always identical to the optimal solutions., This work was partially funded by Spanish Project PID2019- 111544GB-C22 (MINECO / FEDER), by the European Union’s Horizon 2020 Research and Innovation Program under Grant Agreements 723596, 768824, 764025 and 814945, and by 2017 SGR 1537.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Implementing SDGs to a Sustainable Rural Village Development from Community Empowerment: Linking Energy, Education, Innovation, and Research

  • Arco Bravo, Isabel del
  • Ramos Pla, Anabel
  • Zsembinszki, Gabriel
  • Gracia Cuesta, Alvaro de
  • Cabeza, Luisa F.
Rural depopulation is a worldwide fact and has a domino effect on medium and small cities, which act as a nucleus of reference for small towns. Moreover, the United Nations (UN) stressed that disparities between rural and urban areas are pronounced and still growing over time. Globally, people in rural areas lack access to modern energy services, which affects productivity, educational and health services, exacerbating poverty, among other things. Given this reality, the following research questions arise: how can we act to reverse this reality? Are there examples of transformation in rural contexts where community empowerment is a key strategy? This paper aims at describing the transformation process of a small rural municipality towards a sustainable development, in parallel to the activation of the local productivity that helps to eliminate the effects of rural depopulation. Therefore, the project ALMIA was established as an example of a sustainable village that is Almatret (Catalonia-Spain). The backbone of such project is the commitment to community impowerment, where the main results are the generation of networks with experts and researchers to help the municipality's energy transition, the involvement of the local administration, the commitment to technological development, as well as the socio-community development. Moreover, the activities developed within the project ALMIA are aligned with the UNs Sustainable Development Goals, alignment that is analyzed in detail. Thus, this paper aims to further highlight existing sustainable development practices related to community empowerment in order to promote similar practices., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 768824 and under the grant agreement No 723596. This work is partially supported by ICREA under the ICREA Academia programme. The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. The authors would like to thank the Almatret municipality for their involvement in this challenging project.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Multi-Country Analysis on Energy Savings in Buildings by Means of a Micro-Solar Organic Rankine Cycle System: A Simulation Study

  • Arteconi, Alessia
  • Del Zotto, Luca
  • Tascioni, Roberto
  • Mahkamov, Khamid
  • Underwood, Chris
  • Cabeza, Luisa F.
  • Maldonado, José Miguel
  • Manca, Roberto
  • Mintsa, André Charles
  • Bartolini, Carlo M.
  • Gimbernat, Toni
  • Botargues, Teresa
  • Halimic, Elvedin
  • Cioccolanti, Luca
In this paper, the smart management of buildings energy use by means of an innovative renewable micro-cogeneration system is investigated. The system consists of a concentrated linear Fresnel reflectors solar field coupled with a phase change material thermal energy storage tank and a 2 kWe/18 kWth organic Rankine cycle (ORC) system. The microsolar ORC was designed to supply both electricity and thermal energy demand to residential dwellings to reduce their primary energy use. In this analysis, the achievable energy and operational cost savings through the proposed plant with respect to traditional technologies (i.e., condensing boilers and electricity grid) were assessed by means of simulations. The influence of the climate and latitude of the installation was taken into account to assess the performance and the potential of such system across Europe and specifically in Spain, Italy, France, Germany, U.K., and Sweden. Results show that the proposed plant can satisfy about 80% of the overall energy demand of a 100 m2 dwelling in southern Europe, while the energy demand coverage drops to 34% in the worst scenario in northern Europe. The corresponding operational cost savings amount to 87% for a dwelling in the south and at 33% for one in the north., This research was funded by European Union’s Horizon 2020 Research and Innovation Programme, grant number 723596. The APC was waived for this invited paper
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Development of a smart control unit for small-scale concentrated solar combined heat and power systems for residential applications

  • Cioccolanti, Luca
  • Tascioni, Roberto
  • Moradi, Ramin
  • Pirro, Matteo
  • Bartolini, Carlo M.
  • Makhkamova, Irina
  • Mahkamov, Khamid
  • Cabeza, Luisa F.
  • Gracia Cuesta, Alvaro de
  • Pili, Piero
  • Mintsa, André Charles
  • Mullen, David
Solar energy has a significant potential for future power generation but its intermittent and variable nature results in fluctuations of the operational performance of solar power plants. Despite thermal energy storage (TES) systems improving the flexibility and the sustainability of the performance of Concentrated Solar Power (CSP) plants, smart management is required to deal with the complex dynamic variations in the behaviour and interaction of the different plant's subsystems. In this paper, the design, manufacture, and validation of a smart control unit with extended capabilities for a small-scale CSP combined heat and power (CHP) system are described. More precisely, the control unit has been designed to control and optimise the operation of a microscale Organic Rankine Cycle (ORC) unit coupled with Linear Fresnel Reflectors solar field and an advanced latent heat thermal energy storage tank which were developed by a consortium of universities and companies in the framework of the EU-funded project 'Innova Microsolar'. In parallel to the designing and building the smart control unit, an advanced simulator has been developed in Matlab/Simulink® to investigate the performance of the plant for a wide range of varying ambient and operating conditions. The simulation framework has been connected to the real control unit according to a hardware-in-the-loop (HiL) approach to optimise the control logic of the integrated plant to overcome potential technical and reliability issues during the commissioning of the plant. The developed hardware and the proposed scientific approach can be extended to a wide range of complex solar energy systems equipped with TES and to be integrated into the built environment., This study is a part of the Innova Microsolar Project, funded in the framework of the European Union's Horizon 2020 Research and Innovation Programme (Grant Agreement No 723596). The authors at the University of Lleida would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Development of a Small Solar Thermal Power Plant for Heat and Power Supply to Domestic and Small Business Buildings

  • Mahkamov, Khamid
  • Pili, Piero
  • Manca, Roberto
  • Leroux, Arthur
  • Mintsa, André Charles
  • Lynn, Kevin
  • Mullen, David
  • Halimic, Elvedin
  • Bartolini, Carlo M.
  • Pirro, Matteo
  • Costa, Sol-Carolina
  • Cabeza, Luisa F.
  • Gracia Cuesta, Alvaro de
  • Kenisarin, Murat
  • Makhkamova, Irina
The small solar thermal power plant is being developed with funding from EU Horizon 2020 Program. The plant is configured around a 2-kWel Organic Rankine Cycle turbine and solar field, made of Fresnel mirrors. The solar field is used to heat thermal oil to the temperature of about 240 oC. This thermal energy is used to run the Organic Rankine Cycle turbine and the heat rejected in its condenser (about 18-kWth) is utilized for hot water production and living space heating. The plant is equipped with a latent heat thermal storage to extend its operation by about 4 hours during the evening building occupancy period. The phase change material used is Solar salt with the melting/solidification point at about 220 oC. The total mass of the PCM is about 3,800 kg and the thermal storage capacity is about 100 kWh. The operation of the plant is monitored by a central controller unit. The main components of the plant are being manufactured and laboratory tested with the aim to assemble the plant at the demonstration site, located in Catalonia, Spain. At the first stage of investigations the ORC turbine will be directly integrated with the solar filed to evaluate their joint performance. During the second stage of tests, the Latent Heat Thermal Storage will be incorporated into the plant and its performance during the charging and discharging processes will be investigated. It is planned that the continuous filed tests of the whole plant will be performed during the 2018- 2019 period., This study was funded by European Union’s Horizon 2020 Research and Innovation Program under Project Grant Agreement 723596 (Innova MicroSolar).
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Systematic review on the use of heat pipes in latent heat thermal energy storage tanks

  • Maldonado, José Miguel
  • Gracia Cuesta, Alvaro de
  • Cabeza, Luisa F.
This systematic review presents and discusses the previous research about hybrid devices which combine latent thermal energy storage (TES) technology and heat pipes. A bibliometric analysis of this issue shows how hybrid systems have globally grown popularity during time, providing details about the main researchers and research centres on this particular field. Then, the identified papers are assessed and categorized in two main sections, the experimental research carried out, and the numerical modelling of hybrid systems. Experimental research is later classified regarding the operating temperature range, and their final application. Numerical studies are also further categorized, accordingly to how heat pipes were modelled in this case. This review points out the lack of experimental studies at high temperatures, especially when many simulations extended their models (validated at low temperatures) to higher temperature designs. The paper provides details about the research performed, so the gap for future investigations can be spotted., This work was partially funded by the European Union's Horizon 2020 Research & Innovation Programme under Grant Agreement 723596 with reference name Innova MicroSolar. This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE) and by the Agencia Estatal de Investigación (AEI), of the Ministerio de Ciencia, Innovación y Universidades (RED2018-102431-T). José Miguel Maldonado would like to thank the Spanish Government for his research fellowship (BES-2016-076554). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is a certified TECNIO agent in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.