Skip to main content

RED ESPAÑOLA EN ALMACENAMIENTO DE ENERGIA TERMICA

RED2018-102431-T

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Redes Investigación /Redes Excelencia
Call year 2018
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD DE LLEIDA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 222
Encontrada(s) 3 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Analysis of thermal energy storage tanks and PV panels combinations in different buildings controlled through model predictive control

  • Tarragona, Joan
  • Pisello, Anna Laura
  • Fernández, César
  • Cabeza, Luisa F.
  • de Gracia, Álvaro
  • Payá-Herrero, Jorge|||0000-0003-2663-3191
  • Marchante-Avellaneda, Javier|||0000-0001-5680-5033
[EN] The present study analyses the performance of a heating system controlled by a model predictive control strategy, where the impact of different combinations of thermal energy storage tank volumes and installed PV power capacities are analysed. The novelty of the paper lies in studying both economic and energy impacts of each equipment combination in different locations, buildings, and indoor occupancy schedules. The payback period, the reduction of the electricity grid consumption, and the behaviour of the coefficient of performance of the heat pump are studied in detail for all cases. Results point out that from an economic point of view, to invest in a thermal energy storage tank provides shorter payback periods in comparison to scenarios with PV panels, due to the high price of the solar elements. However, the energy performance analysis highlighted that the use of PV panels contributes to achieve up to 34%, 54%, and 90% of reduction of the electricity grid consumption in Helsinki, Strasbourg, and Athens, respectively. Finally, it is worth noting that the increase of the thermal energy storage volume improves the coefficient of performance of the heat pump., This work was partially funded by the Ministerio de Ciencia, Innovacion y Universidades de Espana (RTI2018-093849-B-C31-MCIU/AEI/FEDER, UE) and the Agencia Estatal de Investigacion (AEI) (RED2018-102431-T) . The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537) . GREiA is a certified TECNIO agent in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme. A.L. Pisello's acknowledgements are due to the National Ministry of Research for supporting NEXT.COM project under the framework of PRIN 2017 (cod. 20172FSCH4_002) and the IEA EBC Annex 79 "Occupant-centric building design and operation" for inspiring human-centric research.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

A framework for sustainable evaluation of thermal energy storage in circular economy

  • Abokersh, Mohamed Hany
  • Norouzi, Masoud
  • Boer, Dieter
  • Cabeza, Luisa F.
  • Gasa, Gemma
  • Prieto, Cristina
  • Jiménez, Laureano
  • Vallès Rasquera, J. Manel
The circular economy can be promoted as a solution to support the sustainability market position of renewable energy systems. To design a circular and sustainable system, a structured approach is needed. The present study develops a methodology framework for sustainable circular system design (SCSD), aiming to assess thermal energy storage (TES) technologies from a sustainable perspective. To this end, a composite indicator, namely, environmental sustainability and circularity indicator (ESC) is provided. This indicator combines the environmental impacts of the TES system via the conduction of a life cycle assessment and its circulatory performance using the product-level material circularity indicator (MCI). The developed methodology is applied to a case study of high-temperature TES using molten salts as a part of a concentrated solar power plant. The SCSD embraces the analysis for the most relevant processes through proposing different ecological scenarios including, increasing the recycling rates (Modest Scenario), increasing the reuse rates (Medium Scenario), and a combination of both (Optimistic scenario). The circularity analysis showed that for the Modest, Medium and optimistic scenarios, the MCI moves from 20.6% for the current situation to 30.3%, 38.6%, and 46.4%, respectively. Accordingly, the optimistic scenario showed the most environmentally sustainable and circular scenario with ESC of 7.89%, whereas the Modest and Medium scenarios exhibited ESCs of 1.20% and 2.16%, respectively. A major obstacle for substantial improvement of the circulatory and ESC is the high share of unrecyclable molten salts in the system and therefore, any effort to improve the circulatory and the environmental benefits of this system can be reached by using more environmentally friendly alternative materials. The study concludes that the integration of reusing and recycling at the initial design should be sought in order to achieve a more environmentally sustainable and circular outcome., The authors would like to acknowledge financial support from the Spanish Ministry of Economy and Competitiveness RTI2018-093849-B-C31 and RTI2018-093849-B-C33 (MCIU/AEI/FEDER, UE), and thank the Catalan Government (2019 FI-B-00762). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (GREiA - 2017 SGR 1537, AGACAPE - 2017 SGR 1409 and 2019 FI-B-00762). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme. This work is partially funded by the Ministerio de Ciencia, Innovación y Universidades – Agencia Estatal de Investigación (AEI) (RED2018-102431-T). This project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 713679 and from the Universitat Rovira i Virgili (URV).
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Effect of the curing process on the thermomechanical properties of calcium aluminate cement paste under thermal cycling at high temperatures for thermal energy storage applications

  • Boquera, Laura
  • Castro Chicot, José Ramón
  • Pisello, Anna Laura
  • Fabiani, Claudia
  • D'Alessandro, Antonella
  • Ubertini, Filippo
  • Cabeza, Luisa F.
Future perspectives to improve the energy efficiency of concentrating solar power (CSP) plants are focused on increasing temperatures above 600 ◦C. Among the different components of a CSP plant, the thermal energy storage (TES) medium must withstand high operating temperatures. Concrete was identified as an exciting candidate for its mechanical and thermal properties, needing further experimental research about this specific application. A fundamental concrete element is the cement binder, bringing cohesion to the composite components. As a requisite, the cement needs to be heat-resistant, and calcium aluminate cement (CAC) suits this demand. This cement is characterised by curing temperature-driven crystallisation changes, triggering an alteration of material properties. Considering that at 60 ◦C, the metastable hexagonal crystallisation is converted into a stable cubic crystallisation, seven curing cases were proposed in this study. After the curing process, thermo-mechanical properties of calcium aluminate cement paste were tested before and after thermal cycles from 290 ◦C to 650 ◦C. The results showed that, despite thermal cycling, the immediate hydration at 60 ◦C results in a higher thermal conductivity and compressive strength than standard curing at 20 ◦C., novaci´on - Agencia Estatal de Investigaci´on (PID2021-123511OB-C31 - MCIN/AEI/10.13039/501100011033) and by the Ministerio de Ciencia, Innovaci´on y Universidades - Agencia Estatal de Investigaci´on (AEI) (RED2018-102431-T). The authors at University of Lleida would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme. Laura Boquera acknowledgments are due to the PhD school in Energy and Sustainable Development from University of Perugia. Laura Boquera would like to acknowledge the financial support provided by UNIPG –CIRIAF InpathTES project. The authors also thank Ciments Molins industrial that provided the material to make possible this experimental research. Financial support of the UNIPG-CIRIAF team has been achieved from the Italian Ministry of University and Research (MUR) in the framework of the Project FISR 2019 “Eco Earth” (code 00245) that is gratefully acknowledged.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Improving the energy efficiency of passive PCM system using controlled natural ventilation

  • Prabhakar, Mohit
  • Saffari Tabalvandani, Mohammad
  • Gracia Cuesta, Alvaro de
  • Cabeza, Luisa F.
In recent years, the building sector has been responsible for continuous increase in energy consumption in the world. Space heating and cooling accounts for 34% of this energy consumption in buildings. In this context, using thermal energy storage (TES) can reduce energy consumption for space air conditioning. The use of phase change materials (PCM) as latent heat thermal energy storage (LHTES) system in the building envelope has been of great interest for passive cooling applications due to the high energy storage capacity of this technology. However, in order to utilize the full potential of a PCM, it needs to be fully charged at each cycle. Ventilation during the night is an effective method which can be used in PCMenhanced office buildings with the aim of charging the PCM every required cycle. In the present study, PCM melting temperature of office building in various climate conditions was optimized using a simulation-based optimization and coupled with free cooling operation. Ventilation control strategies were used to improve the cooling energy performance of the PCM enhanced building integrated into envelopes. It was found that charging PCM with night ventilation, especially when using some specific control strategies of natural ventilation operated by external windows opening results in considerable cooling energy savings. The study was conducted for 15 different cities around the world. It was found that, in hot arid conditions, PCM passive cooling system was ineffective. Although, the energy savings were improved by coupling PCM and natural ventilation in these climate conditions. But the benefits were more or less similar to using natural ventilation only. On the other hand, in temperate condition, the effectiveness of PCM was increased from 3.32% to 25.62% by coupling a PCM passive system with night ventilation. It was further improved to 40% when using PCM with temperature-controlled ventilation. Moreover, it can be said that smart control of ventilation can lead to considerable energy savings., This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31- MCIU/AEI/FEDER, UE) and the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). The authors at the University of Lleida would like to thank the Catalan Government for the quality accreditation given to their research group GREiA (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Comparative study between heat pipe and shell-and-tube thermal energy storage

  • Maldonado, José Miguel
  • Vérez, David
  • Gracia Cuesta, Alvaro de
  • Cabeza, Luisa F.
This paper experimentally evaluates the implementation of heat pipes in latent heat thermal energy storage systems. The well-known performance of heat pipes as a heat transfer technology makes them great candidates to be used as heat exchangers. However, previous studies compared their efficacy against solid metal rods, where heat pipes clearly succeeded. Therefore, the objective of this study is to experimentally evaluate the advantages of using heat pipes instead of a common shell and tubes system, during charging processes. In particular, five latent heat thermal energy storage systems were tested. One based on the shell and tubes, and the remaining four based on heat pipes. The experiments were conducted at constant heat transfer fluid temperature and flow rate, and the results were analysed from the temperature, heat transfer, and visual point of view. The results show that in heat pipes systems the phase change material melts homogeneously through all the storage container. However, the shell and tubes tank performed the charging process in 25 min while the fastest heat pipe one took 40 min for it. On the other hand, in the shell and tubes configuration melt from the heat transfer fluid inlet towards the outlet. Moreover, systems with more heat pipe surface inside the heat transfer fluid collector rovided higher power rates. Comparing the best and the worst heat pipe storage tanks during the first 30 min, the heat transfer rate increased over 40%. But the storing material low conductivity cushioned those high heat transfer rates., This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE) and by the Agencia Estatal de Investigación (AEI), of the Ministerio de Ciencia, Innovación y Universidades (RED2018-102431-T). José Miguel Maldonado would like to thank the Spanish Government for his research fellowship (BES-2016-076554). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is a certified TECNIO agent in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Trends in research on energy efficiency in appliances and correlations with energy policies

  • Vérez, David
  • Borri, Emiliano
  • Cabeza, Luisa F.
According to the Intergovernmental Panel on Climate Change (IPCC) 5th Assessment report, energy-efficient appliances can reduce global electricity consumption even though there is an expected increase in the number and ownership of appliances. The International Energy Agency (IEA) expects a high increase in energy efficiency in traditional appliances (refrigerators, washing machines, television, etc.), and in the number of new appliances installed (also called plug loads). The bibliometric study of publications related to energy-efficient appliances carried out in this paper shows that research on this topic is growing in developed regions (North America and Europe) and even more in some developing regions (Asia Pacific) with a high emphasis on China and India. The results indicate that, in general, policies are always implemented before the core of publications on the topic, with time spans ranging from 3 to 30 years. However, the trend seems to be changing with publications related to new appliances where the core research happens shortly after or in parallel to the establishment of policies., This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31—MCIU/AEI/FEDER, UE) and by the Ministerio de Ciencia, Innovación y Universidades—Agencia Estatal de Investigación (AEI) (RED2018-102431-T). This work is partially supported by ICREA under the ICREA Academia programme.
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Development of a new concrete for high-temperature thermal energy storage

  • Cabeza, Luisa F.
  • Boquera, Laura
  • Castro Chicot, José Ramón
  • Pisello, Anna Laura
Vision: Being a reference group of engineering at an international level, always linked to the University of Lleida. Mission: To propose solutions to the industry in the fields of sustainability, energy engineering and control, through research, technology transfer and training. Objectives: To improve existing knowledge through research and innovation ; To help increase the competitiveness of companies through collaborations, whether for the design of new products or as a technology consultancy., This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE), Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T - MCIU/AEI), Agencia Estatal de Investigación (AEI) - Ministerio de Ciencia, Innovación y Universidades (PCI2020-120695- 2/AEI/10.13039/501100011033), and Secretaria de Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya and is co-financed by the European Union through the European Regional Development Fund (FEDER) (2019PROD00101). Funding has also been received from European Union’s Horizon 2020 research and innovation programs under the project CSPplus (Cofund ERA-NET Action, N° 838311). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537) and the ICREA Catalan institution for awarding the ICREA Academy, for the second consecutive time. GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Technological options and strategies towards zero energy buildings contributing to climate change mitigation: A systematic review

  • Cabeza, Luisa F.
  • Chàfer, Marta
A systematic review of the technological options and strategies to achieve zero energy buildings was carried out to establish today state-of-the-art knowledge base and to present key design and performance factors that define those technologies with the final aim of contributing to climate change mitigation options of buildings. All relevant literature published from January 2013 to August 2019 was critically as- sessed. A total of 14,895 papers were identified and 220 reviews were evaluated as first literature source; this literature showed that the published information is diverse and not organized, therefore climates and building typologies is not possible solely through published information. Collected evidence shows that with appropriate design, buildings can contribute to climate change mitigation decreasing the embodied energy in the materials used in their construction and decreasing the energy demand and use during their operation phase., This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE). This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Experimental study of a novel three-fluids heat exchanger embedded with phase change materials for cooling applications

  • Mselle, Boniface Dominick
  • Zsembinszki, Gabriel
  • Vérez, David
  • Cabeza, Luisa F.
This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 768824 (HYBUILD). This work is partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE) and the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme. Boniface Dominick Mselle would like to thank Programa Santander Predoc UdL for his research fellowship.
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Estudio experimental sobre el impacto del factor de empaquetamiento en un almacenamiento de energía térmica a escala de prototipo con materiales de cambio de fase en forma tubular

  • Vérez, David
  • Borri, Emiliano
  • Ure, Zafer
  • Zsembinszki, Gabriel
  • Cabeza, Luisa F.
El almacenamiento de energía térmica (TES) es esencial para mejorar la penetración de las energías renovables. Entre todas las tecnologías de almacenamiento, el almacenamiento de energía térmica por calor latente (LTES) con el uso de materiales de cambio de fase ha ganado atención debido a su alta densidad energética. La macro-encapsulación es la técnica más común para incluir PCM en un depósito de almacenamiento. Sin embargo, el diseño del almacenamiento y la distribución del PCM macro-encapsulado tienen un gran impacto sobre la transferencia de calor y la capacidad de almacenamiento de energía. En este estudio se probó experimentalmente un depósito de PCM a escala piloto con una capacidad de almacenamiento de 13 kWh utilizando PCM macro-encapsulado con dos factores de empaquetamiento diferentes., Thermal energy storage (TES) is essential to improve the penetration of renewable energies. Among all storage technologies, latent heat thermal energy storage (LTES) using phase change materials has gained attention due to its high energy density. Macro-encapsulation is the most common technique to include PCM in a storage tank. However, the design of the storage and the distribution of the macro-encapsulated PCM have a great impact on heat transfer and energy storage capacity. In this study, a pilot-scale PCM tank with a storage capacity of 13 kWh was experimentally tested using macro-encapsulated PCM with two different packaging factors., Este estudio está parcialmente financiado por la Unión Europea SWS-HEATING (GA 764025), por el Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE) y por el Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). Los autores de la Universidad de Lleida agradecen al Gobierno de Cataluña por la acreditación de calidad concedida al grupo de investigación GREiA (2017 SGR 1537). GREiA es un agente certificado TECNIO en la categoría de desarrolladores tecnológicos del Gobierno de Cataluña. Este trabajo está parcialmente apoyado con ICREA dentro del programa ICREA Academia.
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Life cycle assessment (LCA) of concentrating solar power (CSP) plant in tower configuration with and without thermal energy storage (TES)

  • Gasa, Gemma
  • López-Román, Antón
  • Cabeza, Luisa F.
  • Prieto, Cristina
INTRODUCTION: The main objective of the present study is to compare the 30-year life cycle assessment of two concentrating solar power systems with tower configuration, one without thermal energy storage and the other with thermal energy storage, in order to assess their potential impact on the environment. To achieve this aim, common reference characteristics have been defined in order to allow the optimal comparison. The reference power considered for both technologies has been 110 MW and the "power cycle" (turbine, alternator and generator) and the "cooling system" are the same in both configuration. In general terms, the significant differences between both configurations are focused on the area of the solar field, and with it the number of heliostats, and on the storage of thermal energy by inorganic salts. Although it is true that concentrating solar power plant (CSP) in tower without thermal energy storage is not a current commercial configuration, it is very interesting to be able to compare the environmental impacts of both configurations when thermal energy storage is added to the solar plant. In addition, the study ends by assessing whether the environmental impact that is generated by adding thermal energy storage compensates with the improvement of its manageability, its dispatchability and its contribution to decarbonisation. METHOD: Life cycle assessment (LCA) is a methodology that allows evaluating the environmental loads associated with a product, process or activity, identifying and quantifying the energy, the materials consumed and the waste released into the environment throughout the entire life cycle. The LCA included in this study is carried according to ISO 14040 and 14044. Thus, this LCA is based on the impact assessment method ReCiPe in impact points and GWP in kgCO2eq and the database used is Ecoivent 3.6, which has positioned itself as a world leader in creating more transparent life cycle impact databases. Moreover, this work encompasses three distinct phases of evaluation: manufacturing, operational, and end of life. RESULTS AND CONCLUSIONS: At the time of submitting this abstract, the study is on its way., This work was supported under the umbrella of CSP-ERA-Net 1st Cofund Joint Call by AEI - Spanish Ministry of Science, Innovation and Universities, TÜBITAK - Scientific and Technological Research Council of Turkey, and CSO - Israeli Ministry of Energy. CSP-ERA-Net is supported by the European Commission within the EU Framework Programme for Research and Innovation HORIZON 2020 (Cofund ERA-NET Action, N° 838311) and it was partially funded by Agencia Estatal de Investigación (AEI) - Ministerio de Ciencia, Innovación y Universidades (PCI2020-120695- 2/AEI/10.13039/501100011033), Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE), and Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018- 102431-T). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Control inteligente en sistemas de almacenamiento térmico estacional (vídeo)

  • Crespo, Alicia
¿Qué es un sistema de almacenamiento de energía térmica estacional? Es un sistema de almacenamiento que almacena calor (normalmente del sol) durante el verano y lo libera en invierno cuando existe una necesidad de calefacción y no hay o hay muy poca irradiación solar. Este sistema es perfecto para climas noreuropeos. ¿Por qué usar un sistema de almacenamiento por sorción? Porque funciona muy bien de forma estacional ya que presenta bajas pérdidas térmicas a largo plazo. Además tiene elevada densidad energética, es decir, puede almacenar mucho calor por volumen de material., Alicia Crespo agradece la financiación económica de la beca FI-SDUR de la AGAUR de la Generalitat de Catalunya y la Secretaria d’Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya. Este trabajo está parcialmente financiado por el Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (AEI) (PID2021-123511OB-C31 - MCIN/AEI/10.13039/501100011033/FEDER, UE) y el Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). Los autores agradecen al Gobierno de Cataluña la acreditación de calidad concedida al grupo de investigación GREiA (2017 SGR 1537). GREiA es un agente certificado TECNIO en la categoría de desarrolladores tecnológicos del Gobierno de Cataluña. Este trabajo está parcialmente apoyado por ICREA dentro del programa ICREA Academia. Este Proyecto recibe financiación de los programas de investigación e innovación Horizonte 2020 de la Unión Europea en el marco del proyecto en el proyecto SWS-Heating (No 764025). El proyecto NitRecerCat (GA 101061189) está cofinanciado por el programa de investigación e innovación Horizonte Europa de la Unión Europea.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Research trends and perspectives of thermal management of electric batteries: Bibliometric analysis

  • Cabeza, Luisa F.
  • Frazzica, Andrea
  • Chàfer, Marta
  • Vérez, David
  • Palomba, Valeria
The development of renewable energy sources (RES) to achieve the UN Sustainable Development Goals of a 100% RES-based energy system has driven a lot of research on batteries for electric vehicles and stationary applications, to further support the RES penetration. Batteries are strongly linked to the thermal conditions at which they operate, therefore the study and adequate implementation of a correct thermal management of batteries is essential for their better deployment and use. But this is a relatively new research topic with growing interest in recent years. This paper presents a bibliometric analysis of battery thermal management systems to understand the trends, assess the state-of-the-art, and identify research gaps. Results show that most research is carried out in lithium-ion batteries, and that the thermal managements systems studied are air cooling, liquid cooling, and phase change materials as passive systems or in combination with air and liquid cooling ones. The biggest research gaps are the lack of studies on other battery types and a clear comparison among these kinds of thermal management systems., This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE) and by the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). The authors at the University of Lleida would like to thank the Catalan Government for the quality accreditation given to their research group GREiA (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Hybrid cascade heat pump and thermal-electric energy storage system for residential buildings: experimental testing and performance analysis

  • Palomba, Valeria
  • Bonanno, Antonino
  • Brunaccini, Giovanni
  • Aloisio, Davide
  • Sergi, Francesco
  • Dino, Giuseppe E.
  • Varvagiannis, Efstratios
  • Karellas, Sotirios
  • Nitsch, Birgo
  • Strehlow, Andreas
  • Groβe, André
  • Herrmann, Ralph
  • Barmparitsas, Nikolaos
  • Koch, Nelson
  • Vérez, David
  • Cabeza, Luisa F.
  • Zsembinszki, Gabriel
  • Frazzica, Andrea
The need for innovative heating and cooling systems to decarbonize the building sector is widely recognized. It is especially important to increase the share of renewables at building level by maximizing self-consumption and reducing the primary energy demand. Accordingly, in the present paper, the results on a wide experimental campaign on a hybrid system are discussed. The system included a sorption module working as the topping cycle in a cascade configuration with a DC-driven vapor compression heat pump. A three-fluids heat exchanger with a phase change material (PCM), i.e., RT4 with nominal melting temperature of 4 °C, was installed on the evaporator side of the heat pump, for simultaneous operation as thermal storage and heat pumping purposes. The heat pump was connected to a DC-bus that included PV connection and electricity storage (batteries). Results showed that the energy efficiency of the heat pump in cascade operation was double compared to compression-only configuration and that, when simultaneously charging and discharging the latent storage in cascade configuration, no penalization in terms of efficiency compared to the compression-only configuration was measured. The self-sufficiency of the system was evaluated for three reference weeks in summer conditions of Athens climate and it was found that up to 100% of the electricity needed to drive the system could be self-produced for a modest cooling demand and up to 67% for the warmer conditions with high cooling demand., This project has received funding from the European Union’s Horizon 2020 research and innovation program under grant agreement No. 768824 (HYBUILD). This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31) and by the Ministerio de Ciencia, Innovación y Universidades—Agencia Estatal de Investi-gación (AEI) (RED2018-102431-T). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia program.
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Phase change materials: is it still the starring technology of thermal energy storage? Current applications, perspectives and research gaps

  • Cabeza, Luisa F.
  • Borri, Emiliano
This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE), the Ministerio de Economia y Competitividad (TIN2015-71799-C2-2-P (MINECO/FEDER)), the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T), the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (PCI2020-120695-2 through PCI call), and the Secretaria de Universitats i Recerca of the Departament d'Empresa i Coneixement of the Generalitat de Catalunya (2019 PROD 00101 (AGAUR/FEDER)). Funding has also been received from European Union’s Horizon 2020 research and innovation programs under projects Innova MicroSOLAR (723596), HYBUILD (768824), SWS-HEATING (764025), SolBio-Rev (814945) and EuNightCat20 (954506). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

The role of buildings in climate change mitigation

  • Cabeza, Luisa F.
This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31-MCIU/AEI/FEDER,UE), Ministerio de Ciencia, Innovación y Universidades-Agencia Estatal de Investigación(AEI)(RED2018-102431-T-MCIU/AEI), Agencia Estatal de Investigación(AEI)-Ministerio de Ciencia, Innovación y Universidades (PCI2020-120695-2/AEI/10.13039/501100011033), and Secretaria de Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya and is co-financed by the European Union through the European Regional Development Fund(FEDER)(2019PROD00101). Funding has also be enreceived from European Union’s Horizon2020 research and innovation programs under projects Innova MicroSOLAR (723596), HYBUILD (768824), SWS-HEATING (764025), SolBio-Rev (814945), CSPplus (Cofund ERA-NET Action, N°838311), and CO-COOL (101007976). The authors would like to thank the Catalan Government for the quality accreditation given to the irresearch group (2017SGR1537) and the ICREA Catalan institution for awarding the ICREA Academy, for the second consecutive time. GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

A comparative life cycle assessment between green walls and green facades in the Mediterranean continental climate

  • Chàfer, Marta
  • Pérez Luque, Gabriel
  • Coma Arpón, Julià
  • Cabeza, Luisa F.
The building and construction sector is a large contributor to anthropogenic greenhouse gas emissions and consumes vast natural resources. Improvements in this sector are of fundamental importance for national and global targets to combat climate change. In this context, vertical greenery systems (VGS) in buildings have become popular in urban areas to restore green space in cities and be an adaptation strategy for challenges such as climate change. However, only a small amount of knowledge is available on the different VGS environmental impacts. This paper discusses a comparative life cycle assessment (LCA) between a building with green walls, a building with green facades and a reference building without any greenery system in the continental Mediterranean climate. This life cycle assessment is carried according to ISO 14040/44 using ReCiPe and GWP indicators. Moreover, this study fills this gap by thoroughly tracking and quantifying all impacts in all phases of the building life cycle related to the manufacturing and construction stage, maintenance, use stage (operational energy use experimentally tested), and final disposal. The adopted functional unit is the square meter of the facade. Results showed that the operational stage had the highest impact contributing by up to 90% of the total environmental impacts during its 50 years life cycle. Moreover, when considering VGS, there is an annual reduction of about 1% in the environmental burdens. However, in summer, the reduction is almost 50%. Finally, if the use stage is excluded, the manufacturing and the maintenance stage are the most significant contributors, especially in the green wall system., This work was partially funded by the Ministerio de Ciencia,Innovación y Universidades de España (No. RTI2018-093849-B-C31 – MCIU/AEI/FEDER, UE) and by the Ministerio de Ciencia, Inno-vación y Universidades – Agencia Estatal de Investigación (AEI)(No. RED2018-102431-T). The authors at GREiA would like tothank the Catalan Government for the quality accreditation givento their research group (2017 SGR 1537). GREiA is a certified agentTECNIO in the category of technology developers from the Govern-ment of Catalonia. This work is partially supported by ICREA underthe ICREA Academia programme.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Bayesian optimization for effective thermal conductivity measurement of thermal energy storage: An experimental and numerical approach

  • Yang, Lizhong
  • Gil, Antoni
  • Leong, Pammy S.H.
  • Khor, Jun Onn
  • Akhmetov, Bakytzhan
  • Tan, Wooi Leong
  • Rajoo, Srithar
  • Cabeza, Luisa F.
  • Romagnoli, Alessandro
The increasing demand for cooling and refrigeration poses an urgent need in designing efficient and low-cost thermal energy storage systems for future energy systems. While multiple effects may affect the heat transfer behaviors during thermal energy storage, these effects can be lumped into one parameter, the effective thermal conductivity. Effective thermal conductivity provides a simple and reliable solution for accurate numerical simulations in designing a thermal energy storage system. In this study, a novel experimental, numerical and Bayesian optimization-based method is developed and validated that allows for fast and accurate measurement of the effective thermal conductivities over a wide temperature range. The method can also be applied to other bulky and heterogeneous structures that cannot be considered as continuous media. An experimental setup and a 3D numerical model were developed for the plate-type thermal energy storage. After a thorough algorithm comparison, Bayesian optimization using Gaussian process was selected to search for the effective thermal conductivities with high accuracy (root mean square error < 2 K and R-squared between 0.975 and 0.992). The effective thermal conductivities measured using deionized water as the phase change material were validated by a COMSOL simulation. With the accurate effective thermal conductivity results, we revealed that neglecting the effective thermal conductivity for the solid phase while still using conduction models will lead to significant errors in the simulation. A duo arch-shaped graphite sheet-based macrofiller is designed and inserted into the plate-type thermal energy storage, which increased the effective thermal conductivities by around 20% and suppressed the subcooling effect., This research is partially funded by the Ministerio de Ciencia Innovación y Universidades de España (RTI2018-093849-B-C31— MCIU/AEI/FEDER, UE), and the Ministerio de Ciencia, Innovación y Universidades—Agencia Estatal de Investigación (AEI) (RED2018- 102431-T). This work is partially supported by ICREA under the ICREA Academia programme. The authors at the University of Lleida would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Bibliometric map on corrosion in concentrating solar power plants

  • Cabeza, Luisa F.
  • Borri, Emiliano
  • Prieto, Cristina
Concentrating solar power (CSP), also known as solar thermal electricity (STE), is increasing its deployment worldwide. One of the potential ways to decrease costs in CSP plants is the improvement of corrosion resistance between the heat transfer fluid (HTF) and storage materials, and the materials used for pipes, tanks, containers, and receivers. This paper assesses the literature on this topic (290 publications) through a bibliometric analysis, identifying the trends of the research, the topics of most interest to researchers, and literature gaps. Most documents are from Spain, Germany, and the United States of America. Results show that the most recent approaches for corrosion migration are selective coatings and the use of nanoparticles to reduce corrosiveness. The use of nitrates is changing to other salts such as chloride mixtures and potassium compounds. In addition, the techniques used to evaluate corrosion results are dominated by scanning electron microscopy (SEM), X-ray diffraction (XRD), and electrochemical testing, but new dynamic techniques are starting to be used, representing the biggest gap that needs to be filled for the testing of components such as solar receivers., Funding This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31-MCIU/AEI/FEDER, UE) and by the Ministerio de Ciencia, Innovación y Universidades-Agencia Estatal de Investigación (AEI) (RED2018-102431-T). This work is partially supported by ICREA under the ICREA Academia programme. Acknowledgments The authors at the University of Lleida would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Thermo-mechanical stability of supplementary cementitious materials in cement paste to be incorporated in concrete as thermal energy storage material at high temperatures

  • Boquera, Laura
  • Castro Chicot, José Ramón
  • Pisello, Anna Laura
  • Fabiani, Claudia
  • D'Alessandro, Antonella
  • Ubertini, Filippo
  • Cabeza, Luisa F.
The incorporation of recycled materials in concrete as a partial replacement of cement is becoming an alternative strategy for decreasing energy-intensive and CO2 emissions imputable to the cement manufacture, while investigating new potential uses of such multifunctional materials for environmental sustainability opportunities. Therefore, low-cost and worldwide availability of by-products materials is being assessed for sensible heat thermal energy storage applications based on cementitious materials. A greater concern is especially required focusing on the thermal stability of cement paste under high temperature cycled conditions. Moreover, compatibility between cement type and supplementary cementitious materials is determinant for the proper performance reliability. In this study, benchmark cement types were selected, i.e., ordinary Portland and calcium aluminate. Six supplementary cementitious materials were added to both types of cement in a content of 10 % and 25 %. Thermo-mechanical properties were studied before and after 10 thermal cycles from 290 to 650 ◦C. Results after thermal cycling showed that calcium aluminate cement paste mixtures maintained their integrity. However, most ordinary Portland cement paste mixtures were deteriorated: only mixtures with 25 % cement replacement with chamotte, flay ash, and ground granulated blast furnace slag remained without cracks. Calcium aluminate cement paste mixtures obtained the highest compressive strength, for partial replacement of cement with 10 % of chamotte, ground granulated blast furnace slag, and iron silicate. The incorporation of supplementary cementitious materials did not increase the thermal conductivity., This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE) and by the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). The authors at University of Lleida would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme and by the Italian project ‘SOS-CITTA’ supported by Fondazione Cassa di Risparmio di Perugia under grant agreement No 2018.0499.026. Laura Boquera acknowledgments are due to the PhD school in Energy and Sustainable Development from University of Perugia. Laura Boquera would like to acknowledge the financial support provided by UNIPG – CIRIAF InpathTES project. The authors also thank the companies that provided the material to make possible this experimental research: Arciresa, Abrasivos Mendiola EDERSA—Masaveu Industria, General Admixtures S.p.A, Mapei, Ciments Molins industrial, and Promsa for the material supplied in this research. Financial support of the UNIPG-CIRIAF team has been achieved from the Italian Ministry of University and Research (MUR) in the framework of the Project FISR 2019: “Eco Earth” (code 00245) and it is gratefully acknowledged.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Effect of climate change and occupant behaviour on the environmental impact of the heating and cooling systems of a real apartment. A parametric study through life cycle assessment

  • Fajilla, Gianmarco
  • Borri, Emiliano
  • De Simone, Marilena
  • Cabeza, Luisa F.
  • Bragança, Luís
Climate change has a strong influence on the energy consumption of buildings, affecting both the heating and cooling demand in the actual and future scenario. In this paper, a life cycle assessment (LCA) was performed to evaluate the influence of both the occupant behaviour and the climate change on the environmental impact of the heating and cooling systems of an apartment located in southern Italy. The analysis was conducted using IPCC GWP and ReCiPe indicators as well as the Ecoinvent database. The influence of occupant behaviour was included in the analysis considering different usage profiles during the operational phase, while the effect of climate change was considered by varying the weather file every thirty years. The adoption of the real usage profiles showed that the impact of the systems was highly influenced by the occupant behaviour. In particular, the environmental impact of the heating system appeared more influenced by the operation hours, while that of the cooling system was more affected by the natural ventilation schedules. Furthermore, the influence of climate change demonstrated that more attention has to be dedicated to the cooling demand that in the future years will play an ever-greater role in the energy consumption of buildings., This research was funded by the Calabria Region Government with the Gianmarco Fajilla’s Ph.D. scholarship (POR Calabria FSE/FESR 2014–2020) grant number H21G18000170006. A part of this publication has received funding from Secretaria Nacional de Ciencia y Tecnologia (SENACYT) under the project code FID18-056. This research was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31—MCIU/AEI/FEDER, UE) and by the Ministerio de Ciencia, Innovación y Universidades—Agencia Estatal de Investigación (AEI) (RED2018-102431-T). This work is partially supported by ICREA under the ICREA Academia programme.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Macro-porous permeability aspects of MgSO4 salt hydrate foams for energy storage applications

  • Calabrese, Luigi
  • Hernández, Leonor
  • Mondragón, Rosa
  • Cabeza, Luisa F.
In the present work a macroporous silicone foam, able to contain the magnesium sulfate, was chosen as matrix for the reversible hydration/dehydration process of the salt hydrate. The aim of the article was addressed towards the assessment of the relationship among microstructure, permeability and mass diffusion of the composite foam. This aspect represents an essential step for the future industrial development of this composite material. The results show that the filler content influences the foam morphology where a transition from closed to mixed and then closed cell again was observed with increasing filler content. Consequently, depending on the distribution and interconnection of the structural channels, a different effectiveness in guaranteeing mass diffusion phenomena was identified. In particular, permeability tests show that foams with 50 wt% of salt hydrates have a highly interconnected microstructure allowing a permeability over three times higher than a closed cell structure making it suitable for thermochemical energy storage applications., This work was partially funded by the Ministerio de Ciencia, Innovaci on y Universidades de España (MCIU/AEI/ FEDER, UE) (RTI2018-093849-B-C31) and by the Ministerio de Ciencia, Innovaci on y Universidades - Agencia Estatal de Investigaci on (AEI) (RED2018-102431-T). Dr. Luisa F. Cabeza would like to thank the Catalan Government for the quality accreditation given to her research group (2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia program. Furthermore, special thanks to Dr. Angela Caprì who made the composite foam samples used for this experimental campaign. Open Access Funding provided by Universita degli
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Desarrollo y optimización de nuevos PCM en base a sales inorgánicas, para su aplicación en sistemas de almacenamiento de energía térmica a altas temperaturas (Nit Europea de la Recerca 2022)

  • Martínez, Franklin R.
Las plantas de concentración solar de potencia CSP, son instalaciones industriales donde se aprovecha la radiación solar para producir energía eléctrica. Los rayos solares son reflejados desde una superficie extensa y concentrados en un solo punto (superficie reducida) para calentar el fluido calo portador (HTF) a una temperatura de 565ºC, este fluido caliente ingresa al intercambiador de calor donde cede al agua el calor acumulado, produciendo vapor, el cual ingresa a la turbina donde se genera energía eléctrica., F. Rodrigo Martínez Alcocer agradece a la Beca Doctorado Nacional para estudiantes extranjeros ANID 2021 Folio 21211932 por el apoyo financiero en la investigación. Los autores agradecen al Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (PID2021-123511OB-C31 - MCIN/AEI/10.13039/501100011033/FEDER, UE) y el Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). Los autores agradecen al gobierno de Cataluña la acreditación de calidad al grupo de investigación GREiA (2017 SGR 1537). GREiA tiene la acreditación como agente TECNIO en la categoría de desarrolladores tecnológicos del gobierno de Cataluña. También el presente trabajo tiene un apoyo de ICREA en el programa ICREA Academia. Este trabajo está cofinanciado por el programa de investigación e innovación Horizon Europe de la Unión Europea bajo el proyecto NitRecerCat (GA 101061189).
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Trends and gaps in global research of greenery systems through a bibliometric analysis

  • Chàfer, Marta
  • Cabeza, Luisa F.
  • Pisello, Anna Laura
  • Tan, Chun Liang
  • Wong, Nyuk Hien
This study presents a critical review analysis of greenery systems research through a bibliometric approach. The purpose of this study is to provide a holistic overview by (i) the development of the field; (ii) the research trends and the main issues; and (iii) the main gaps still observed in the literature. Therefore, this paper provides the past, the present and the potential future of this scientific topic and serves as an orientation and guide for researchers who aim for a better understanding of the main progress and gaps. A detailed analysis of 1918 documents found in the Scopus database for the 1974-2019 period was conducted. Content analysis of titles, keywords and abstracts revealed that most of the research has focused on the study of green roofs. Previously this topic was dominated by water runoff analysis, while recent contributions acknowledge greenery as an effective microclimate mitigation strategy, especially in urban areas. The United States was the most productive country, representing almost 20 % of the total documents. Over 86 % of the relevant documents were published since 2009. Overall, research on this topic is increasing, with new methods and directions but some gaps remain particularly on the areas of environmental impact, costs, health, outdoor thermal comfort, and vertical greenery systems., This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE) and the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). The authors at the University of Lleida would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme. A.L. Pisello’s acknowledgements are due to Fondazione Cassa di Risparmio di Perugia for supporting the investigation about urban mitigation techniques within the project SOS CITTÁ 2018.0499.026.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Recent developments of thermal energy storage applications in the built environment: a bibliometric analysis and systematic review

  • Borri, Emiliano
  • Zsembinszki, Gabriel
  • Cabeza, Luisa F.
The energy consumption in the built environment represents one of the major contributors of carbon emissions to the atmosphere. This leads to the need for a transition in the building sector and the introduction of policies that pursue high efficiency in residential and non-residential buildings with an increasing share of renewables. The benefit of the use of thermal energy storage is widely recognized to increase the efficiency of energy systems in different building typologies, to help in the introduction of renewable energies in buildings and to reduce the energy demand needed for heating and cooling. Nowadays, different thermal energy storage technologies are available, including sensible, latent, and sorption and chemical reactions (also called thermochemical) energy storage. Although in the past twenty years, the scientific literature showed an increasing trend in the research of thermal energy storage integrated to the building sector, it was only in recent years that this concept was extended to the built environment, which includes residential and non-residential buildings, districts, and urban networks. This paper provides a comprehensive review and classification of thermal energy storage technologies applied in the built environment considering the trends and the future perspective of the past and current research., This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE) and by the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREiA (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Improvement of Phase Change Materials (PCM) Used for Solar Process Heat Applications

  • Prieto, Cristina
  • López-Román, Antón
  • Martínez, Noelia
  • Morera Prat, Josep M.
  • Cabeza, Luisa F.
The high intermittency of solar energy is still a challenge yet to be overcome. The use of thermal storage has proven to be a good option, with phase change materials (PCM) as very promising candidates. Nevertheless, PCM compounds have typically poor thermal conductivity, reducing their attractiveness for commercial uses. This paper demonstrates the viability of increasing the PCM effective thermal conductivity to industrial required values (around 4 W/m·K) by using metal wool infiltrated into the resin under vacuum conditions. To achieve this result, the authors used an inert resin, decoupling the specific PCM material selection from the enhancement effect of the metal wools. To ensure proper behavior of the metal wool under standard industrial environments at a broad range of temperatures, a set of analyses were performed at high temperatures and an inert atmosphere, presenting a thorough analysis of the obtained results., The research leading to these results has received funding from CDTI in the project Innterconecta Thesto (ITC-20111050). The work partially funded by the by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31-MCIU/AEI/FEDER, UE) and by the Ministerio de Ciencia, Innovación y Universidades-Agencia Estatal de Investigación (AEI) (RED2018-102431-T). Dr. Cabeza would like to thank the Catalan Government for the quality accreditation given to her research group GREiA (2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

A comprehensive review on sub-zero temperature cold thermal energy storage materials, technologies, and applications: State of the art and recent developments

  • Yang, Lizhong
  • Villalobos, Uver
  • Akhmetov, Bakytzhan
  • Gil, Antoni
  • Khor, Jun Onn
  • Palacios, Anabel
  • Li, Yongliang
  • Ding, Yulong
  • Cabeza, Luisa F.
  • Tan, Wooi Leong
  • Romagnoli, Alessandro
The energy industry needs to take action against climate change by improving efficiency and increasing the share of renewable sources in the energy mix. On top of that, refrigeration, air-conditioning, and heat pump equipment account for 25-30% of the global electricity consumption and will increase dramatically in the next decades. However, some waste cold energy sources have not been fully used. These challenges triggered an interest in developing the concept of cold thermal energy storage, which can be used to recover the waste cold energy, enhance the performance of refrigeration systems, and improve renewable energy integration. This paper comprehensively reviews the research activities about cold thermal energy storage technologies at sub-zero temperatures (from around 􀀀 270 ◦C to below 0 ◦C). A wide range of existing and potential storage materials are tabulated with their properties. Numerical and experimental work conducted for different storage types is systematically summarized. Current and potential applications of cold thermal energy storage are analyzed with their suitable materials and compatible storage types. Selection criteria of materials and storage types are also presented. This review aims to provide a quick reference for researchers and industry experts in designing cold thermal energy systems. Moreover, by identifying the research gaps where further efforts are needed, the review also outlines the progress and potential development directions of cold thermal energy storage technologies., The authors would like to acknowledge the funding support from SJ-NTU Corporate Lab. This work was partically funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE), and the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). The authors at the University of Lleida would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia program.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Perspectives on thermal energy storage research

  • Cabeza, Luisa F.
  • Gracia Cuesta, Alvaro de
  • Zsembinszki, Gabriel
  • Borri, Emiliano
The use of thermal energy storage (TES) allows to cleverly exploit clean energy resources, decrease the energy consumption, and increase the efficiency of energy systems. In the past twenty years, TES has continuously attracted researchers generating an extensive scientific production growing year by year. Despite the large number of publications, there are some aspects of TES that need to be further investigated in order to assess its complete feasibility. This paper gives a perspective on the state-of-the-art of TES, highlighting the research trends and the research gaps of different TES technologies. Using bibliometric analyses techniques, the main research gaps identified were related to economic, environmental, and social aspects., This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE) and by the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREiA (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Innovative cryogenic Phase Change Material (PCM) based cold thermal energy storage for Liquid Air Energy Storage (LAES) - Numerical dynamic modelling and experimental study of a packed bed unit

  • Tafone, Alessio
  • Borri, Emiliano
  • Cabeza, Luisa F.
  • Romagnoli, Alessandro
Electrical energy storage represents a necessary link between sustainability goals and the enhancement of intermittent renewable energy sources penetration in electricity grids. Liquid air energy storage (LAES) is a promising large scale thermo-mechanical energy storage system whose round trip efficiency is largely affected by the performance of the sub-thermal energy storages. The high grade cold storage (HGCS) is by far the most important due to the crucial thermodynamic recovery of the waste cold stream released by the liquid air regasification process. LAES pilot plant and pre-commercial demonstrator, as well as the vast majority of the theoretical and experimental analysis found in literature studies, currently design to store that exergetically valuable cold source in sensible heat (SH) thermal energy storage, economically efficient but low energy density solution. Conversely, phase change material (PCM) has the potential to store a larger amount of energy using the same amount of storage volume. The objective of the present work is to numerically and experimentally investigate the thermal behaviour of a novel cryogenic HGCS packed bed filled by PCM and determine how the novelty introduced affects the LAES thermodynamic and economic performance compared to the SH configuration. To this end, a simplified transient one-dimensional numerical model to simulate the charging and discharging phase of the HGCS system has been developed and successfully validated against experimental results provided by literature for SH medium and an experimental campaign carried out on a novel lab scale HGCS at TESLAB@NTU for PCM, representing a unicum in literature for both PCM and LAES applications. The numerical results have shown that the introduction of a PCM in the HGCS mitigates the thermocline effect shown in SH configuration ensuring: a) longer discharge phase by means of the thermal buffer phenomena triggered by the phase change process and b) lower specific consumption compared to SH configuration (0.272 vs 0.330 kWhe/kgLA) due to a lower time average outlet temperature of the heat transfer fluid during the HGCS discharge, corresponding to LAES charge phase. From an economic perspective, the decrease of the time average specific consumptions results in a notable payback period inferior to 3 years, making the economic investment considerably attractive., This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE) and by the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREiA (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Soluciones de almacenamiento de energía térmica para edificios

  • Vérez, David
Este trabajo está parcialmente financiado por el Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (AEI) (PID2021- 123511OB-C31 - MCIN/AEI/10.13039/501100011033/FEDER, UE) y el Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). Los autores agradecen al Gobierno de Cataluña la acreditación de calidad concedida al grupo de investigación GREiA (2017 SGR 1537). GREiA es un agente certificado TECNIO en la categoría de desarrolladores tecnológicos del Gobierno de Cataluña. Este trabajo está parcialmente apoyado por ICREA dentro del programa ICREA Academia. El proyecto NitRecerCat (GA 101061189) está cofinanciado por el programa de investigación e innovación Horizonte Europa de la Unión Europea.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Optimal control of natural ventilation as passive cooling strategy for improving the energy performance of building envelope with PCM integration

  • Piselli, Cristina
  • Prabhakar, Mohit
  • Gracia Cuesta, Alvaro de
  • Saffari Tabalvandani, Mohammad
  • Pisello, Anna Laura
  • Cabeza, Luisa F.
Phase Change Materials have been acknowledged for their potential to be used as passive strategy for improving energy efficiency and occupants' thermal comfort in buildings. However, their performance still needs to be enhanced to have them effectively used. In this view, this study investigates the potential improvement of PCMs performance for passive cooling application by efficient natural ventilation in residential building stock. Therefore, coupled dynamic simulation and optimization analysis is performed to explore the optimum melting temperature of PCM integrated in the external building envelope to minimize cooling loads in different Italian climate zones. Moreover, various natural ventilation control strategies are implemented to assess their influence on the process of PCM charge-discharge cycle. Results show that PCM inclusion in the building envelope provides significant cooling savings, up to about 300 kWh/year in mild climates. Furthermore, both night and temperature controlled natural ventilation are able to enhance the efficiency of PCMs thermal energy storage charge-discharge cycle. However, the optimum performance is obtained by coupling PCMs with natural ventilation controlled by indoor/outdoor temperature difference in all considered climate contexts. Accordingly, considerable building cooling energy need reduction is achievable through the optimum combination of PCMs and natural ventilation control, especially in milder climates., GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. The work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE). The work was partially funded by the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). The authors at the University of Lleida would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme. The authors at University of Perugia thank the Italian Ministry of research and university for supporting the NEXT.COM project under the framework of PRIN 2017 call and the IEA EBC Annex 79 “Occupant-centric building design and operation” for inspiring human-centric research.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Shell-and-tube latent heat thermal energy storage design methodology with material selection, storage performance evaluation, and cost minimization

  • Yang, Lizhong
  • Xu, Haoxin
  • Cola, Fabrizio
  • Akhmetov, Bakytzhan
  • Gil, Antoni
  • Cabeza, Luisa F.
  • Romagnoli, Alessandro
Shell-and-tube latent heat thermal energy storage units employ phase change materials to store and release heat at a nearly constant temperature, deliver high effectiveness of heat transfer, as well as high charging/discharging power. Even though many studies have investigated the material formulation, heat transfer through simulation, and experimental studies, there is limited research dedicated to the storage unit design methodology. This study proposes a comprehensive methodology that includes the material assessment with multi-attribute decision-making and multi-objective decision-making tools, epsilon-NTU method, and cost minimization using Genetic Algorithm. The methodology is validated by a series of experimental results, and implemented in the optimization of a storage unit for solar absorption chiller application. A unit cost of as low as USD 8396 per unit is reported with a power of 1.42 kW. The methodology proves to be an efficient, reliable, and systematic tool to fulfill the preliminary design of shell-and-tube LHTES before the computational fluid dynamics or detailed experimental studies are engaged., This research was funded by SJ-NTU Corporate Lab. This research was partially funded by the Ministerio de Ciencia Innovación y Universidades de España (RTI2018-093849-B-C31—MCIU/AEI/FEDER, UE), and the Ministerio de Ciencia, Innovación y Universidades—Agencia Estatal de Investigación (AEI) (RED2018- 102431-T). This work is partially supported by ICREA under the ICREA Academia programme.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Characterisation of commercial phase change materials with potential application in gypsum boards for buildings

  • Marín, Paula E.
  • Ushak, Svetlana
  • Gracia Cuesta, Alvaro de
  • Cabeza, Luisa F.
Currently, there is an expanded utilisation of lightweight construction structures in buildings, which results in a low structure's thermal storage capacity of the envelope due to the application of thermally unsuitable materials. PCMs incorporated into building structures components are potential alternatives to manage the inadequate thermal energy storage capacity of lightweight structures. To provide a guide for selecting and applying commercial PCMs in construction, nine organic and inorganic bulk materials were selected, and their thermophysical properties were characterised. Thus, the enthalpy of melting/crystallisation, the melting/crystallisation temperature, the stability of 50 cycles, and the verification of the presence of the subcooling phenomenon by DSC and the T-history method were evaluated. Since the adequate methods to incorporate the PCMs in gypsum are suspension and vacuum impregnation, their thermal properties, together with density and viscosity, need to be considered, properties that are not typically reported in the datasheets of commercial PCMs. Furthermore, the temperature dependence of the viscosity and density of the solid/liquid PCMs were measured by a rheometer and densimeter/pycnometer, respectively. Based on liquid and solid density values, the volumetric expansion of PCMs during the melting process was calculated. Finally, the characterisation parameters were compared with those provided by the suppliers of the different companies. The characterisation's results indicate that for both organic and inorganic PCMs, the fusion temperature (21 C-26 C) and the density values (0.777-1.515 g/cm3 for liquid state and 0.895-1.860 g/cm3 for solid state) were consistent with the values provided in the datasheet from the suppliers'. Viscosity values were found to be higher than expected, and the enthalpy was found to be lower (19%-30%) when compared with the technical datasheets from manufacturers'. The cycling stability study results were consistent only for the organic samples, without displaying phase segregation or subcooling problems. Based on the thermophysical characterisation, it was possible to establish that three organic RT-21, RT-21(TA), RT-25, and three inorganic SP-21E, PCM 21C, HS-24P PCMs would be suitable products for their inclusion into gypsum boards under the conditions analysed. These findings provide new insights regarding the applicability and development of new strategies and materials for passive or active heating/cooling applications in buildings., Authors acknowledge to ANID/FONDAP Nº 15110019, CONICYT/PCI/REDES Nº 170131 and CONICYT/FONDECYT/REGULAR/ Nº 1170675 projects. Paula E. Marín thanks fellowship CONICYT-PCHA/Doctorado nacional/2015, Folio Nº 21151359 and Doctoral program in Mineral Process Engineering (Doctorado en Ingeniería de Procesos Minerales), Universidad de Antofagasta. This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31- MCIU/AEI/FEDER, UE) and the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). The authors at the University of Lleida would like to thank the Catalan Government for the quality accreditation given to their research group GREiA (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme. We thank MSc. F. Rodrigo Martínez for his contribution.
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Life Cycle Assessment (LCA) of Several Concentrating Solar Plants (CSP) in Tower Configuration with Different Storage Capacity in Molten Salts

  • Gasa, Gemma
  • López-Román, Antón
  • Prieto, Cristina
  • Cabeza, Luisa F.
The objective of this study is to analyse the impact of the thermal energy storage system (TES) in the life cycle assessment (LCA) of a concentrating solar power plant (CSP) with central receiver technology. The study uses a base case of a plant with 110 MWel and 17.5 hours of direct storage with molten salts. First, this plant was compared with a plant of equal power but without storage. Subsequently, the LCAs of four plants with different thermal energy storage capacities, 3, 6, 9 and 17.5 equivalent hours, were compared. The results show that TES is key for solar thermal plants, not only to guarantee dispatch capacity, but also to reduce their environmental impact. Comparing different thermal storage capacities, the most environmentally efficient plant of those analysed is the one with a storage capacity of 9 h., This work is part of PCI2020-120695-2 projects funded by Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (MCIN/AEI/10.13039/501100011033) and by the European Union “NextGenerationEU”/PRTR”. This work was partially funded by the Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (AEI) (PID2021-123511OB-C31 - MCIN/AEI/10.13039/501100011033/FEDER, UE) and by the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T- MCIU/AEI). The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREiA (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Thermal and mechanical degradation assessment in refractory concrete as thermal energy storage container material in concentrated solar plants

  • Prieto, Cristina
  • Fernández, Ángel G.
  • Pérez Osorio, David
  • Cabeza, Luisa F.
This study evaluates the proposal of a concrete storage tank as molten salt container, for concentrating solar power applications. A characterization of the thermal and mechanical properties including compression resistance, density, thermal conductivity and chemical degradation were evaluated in a pilot plant storage tank in contact with solar salt (60%NaNO3 + 40%KNO3) during 120 hours at 565◦C. XRD and SEM analysis were carried out after the molten salt test, observing a penetration of salts in the concrete about 14.5 cm. The chemical and mechanical results in the concrete showed a good behaviour and resistance after the exposure test. Nevertheless, the presence of molten salt in the concrete changed its thermal properties, increasing the density and the thermal conductivity in the concrete zones closer to the molten salt reservoir., The research leading to these results has received funding from the Ministerio de Ciencia, Innovación y Universidades de España in the project THAS@L (RTC-2015-3385-3). We would like to thank Abengoa Thermal Storage Team for their comments and suggestions. This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE) and by the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). The authors at the University of Lleida would like to thank the Catalan Government for the quality accreditation given to her research group GREiA (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Control inteligente en sistemas de almacenamiento térmico estacional

  • Crespo, Alicia
¿Qué es un sistema de almacenamiento de energía térmica estacional? Es un sistema de almacenamiento que almacena calor (normalmente del sol) durante el verano y lo libera en invierno cuando existe una necesidad de calefacción y no hay o hay muy poca irradiación solar. Este sistema es perfecto para climas noreuropeos. ¿Por qué usar un sistema de almacenamiento por sorción? Porque funciona muy bien de forma estacional ya que presenta bajas pérdidas térmicas a largo plazo. Además tiene elevada densidad energética, es decir, puede almacenar mucho calor por volumen de material., Alicia Crespo agradece la financiación económica de la beca FI-SDUR de la AGAUR de la Generalitat de Catalunya y la Secretaria d’Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya. Este trabajo está parcialmente financiado por el Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (AEI) (PID2021-123511OB-C31 - MCIN/AEI/10.13039/501100011033/FEDER, UE) y el Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). Los autores agradecen al Gobierno de Cataluña la acreditación de calidad concedida al grupo de investigación GREiA (2017 SGR 1537). GREiA es un agente certificado TECNIO en la categoría de desarrolladores tecnológicos del Gobierno de Cataluña. Este trabajo está parcialmente apoyado por ICREA dentro del programa ICREA Academia. Este Proyecto recibe financiación de los programas de investigación e innovación Horizonte 2020 de la Unión Europea en el marco del proyecto en el proyecto SWS-Heating (No 764025). El proyecto NitRecerCat (GA 101061189) está cofinanciado por el programa de investigación e innovación Horizonte Europa de la Unión Europea.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Standardised methods for the determination of key performance indicators for thermal energy storage heat exchangers

  • Beyne, Wim
  • T'Jollyn, Ilya
  • Lecompte, Steven
  • Cabeza, Luisa F.
  • De Paepe, Michel
Latent thermal energy storage (LTES) heat exchangers can provide energy storage in a broad range of energy systems. Implementing LTES heat exchangers requires an assessment of their performance in a given system. The performance of a LTES heat exchanger is described by its performance indicators which are classified as technical, economical, and life-cycle indicators. The current paper focusses on the technical performance indicator and specifically on predictive methods which aid the assessment of the performance of a LTES heat exchanger in a system. To structure the analysis, a thermodynamic framework is provided which allows to clearly define LTES heat exchangers and classify the technical performance indicators. In a second step, the literature is reviewed for reported technical performance indicators with a specific focus on predictive methods for these indicators. The averaged effectiveness-number of transfer units (ε-NTU) and phase change time method are identified as important predictive models, analyzed, and compared based on their theoretical derivation. The relation between the averaged effectiveness and phase change time is investigated both theoretically and based on data available in literature which results in recommendations for standardizing the characterization of LTES heat exchangers. By standardizing characterization of LTES heat exchangers, researcher can assess their performance in different energy systems without additional experiments or CFD calculations., This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE) and by the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). Dr. Cabeza would like to thank the Catalan Government for the quality accreditation given to her research group GREiA (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme. This research was supported by Flanders Make, the strategic research centre for the manufacturing industry, Belgium.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Enabling technologies for sector coupling: A review on the role of heat pumps and thermal energy storage

  • Rehman, Omais Abdur
  • Palomba, Valeria
  • Frazzica, Andrea
  • Cabeza, Luisa F.
In order to reduce greenhouse gas emissions, current and future energy systems need to be made more efficient and sustainable. This change can be accomplished by increasing the penetration of renewable energy sources and using efficient technologies in energy generation systems. One way to improve the operation of the whole energy system is through the generation and end-use sector coupling. Power-to-heat energy conversion and storage technologies, in this view, are enabling technologies that can help in balancing and improving the efficiency of both thermal and electric grids. In the present paper, a comprehensive analysis of the role of heat pumps and thermal energy storage for sector coupling is presented. The main features of the analyzed technologies are presented in the context of smart electric grid, district heating and cooling and multi-carrier energy systems, and recent findings and developments are highlighted. Finally, the technical, social, and economic challenges in the adoption of investigated technologies are discussed., This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31—MCIU/AEI/FEDER, UE) and by the Ministerio de Ciencia, Innovación y Universidades—Agencia Estatal de Investigación (AEI) (RED2018-102431-T). The authors at the University of Lleida would like to thank the Catalan Government for the quality accreditation given to her research group GREiA (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia program.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Optimal control of a solar-driven seasonal sorption storage system through deep reinforcement learning

  • Crespo, Alicia
  • Gibert Llauradó, Daniel
  • Gracia Cuesta, Alvaro de
  • Fernàndez Camon, César
Deep reinforcement learning (DRL) has demonstrated its effectiveness in the control of energy systems, although it has not yet been applied to sorption thermal energy storage (TES) systems. The operation of sorption TES systems is notably more complicated compared to other TES variants. The discharge of a sorption TES occurs at a particular desorption and evaporation temperature. Achieving a continuous and efficient discharge of a sorption TES is a challenging control task if heat required at the evaporator is obtained from the sun or the environment. Its operation is especially complicated during winter, because of the limited availability of solar irradiation and low ambient temperatures. Thus, this study analyzes for first time in the literature the competitiveness of deep reinforcement learning to control a solar-driven seasonal sorption TES system and compares it against traditional optimized rule-based control strategy. The system, located in Central Europe, supplied domestic hot water and space heating to a single-family house. Two DRL models were developed and trained to operate the system under two different sets of data: 120 winter consecutive days and 60 winter non-consecutive days. The results showed that the DRL control strategy reduced the system operational costs by 28% in a 60 winter days scenario. For a 120 winter days scenario, the operational cost savings decreased to 13% because the smart control performed worst once the sorption TES was fully discharged. These results were derived from a four-year validation data set, bolstering their robustness. The study demonstrates the successful application of DRL in controlling a solar-driven seasonal sorption TES system, yielding considerable economic savings compared to an RBC strategy. Subsequent work will consist of implementing the smart control strategy at prototype level to assess its performance., This work was partially funded by the Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación, Spain (PID2021-123511OB-C31 - MCIN/AEI/10.13039/501100011033/FEDER, EU) and by the Ministerio de Ciencia, Innovación y Universidades, Spain—Agencia Estatal de Investigación (AEI) (RED2018-102431-T). The authors would also like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. Alicia Crespo would also like to acknowledge the financial support of the FI-SDUR grant from the AGAUR of the Generalitat de Catalunya and Secretaria d’Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

A comparative life cycle assessment (LCA) of different insulation materials for buildings in the continental Mediterranean climate

  • Llantoy, Noelia
  • Chàfer, Marta
  • Cabeza, Luisa F.
The construction industry is one of the less sustainable activities on the planet, constituting 40% of the total energy demand and approximately 44% of the total material use and the generation of 40-50% of the global output of greenhouse gases. The biggest environmental impact caused by buildings is generated during their operational phase due to the energy consumption for thermal conditioning. Hence, in order to reduce this energy consumption, insulation materials must be used and from a life-cycle perspective, the use of insulation materials reduces the building impact over time. This paper develops a comparative life cycle assessment (LCA) of different insulation materials (polyurethane, extruded polystyrene, and mineral wool) to analyse the environmental profile of each insulation material type in the Mediterranean continental climate. Significantly, all three insulation materials demonstrated a net positive benefit over a fifty-year life span due to the reduced heating requirements of the building. Results showed that the highest environmental impact was associated with the polystyrene insulation material and the best environmental performance was for the mineral wool. Moreover, regarding the consumption, polyurethane and mineral wool had similar thermal performance during the whole year. Furthermore, the environmental payback period shows that the cubicles with insulation material are environmentally efficient, if they are used for at least 7 years (for mineral wool), 10 years (polyurethane), and 12 years (extruded polystyrene). The results of this research give new insights into the effect on building insulation materials., This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE)and the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREiA (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Life Cycle Assessment of an Innovative Hybrid Energy Storage System for Residential Buildings in Continental Climates

  • Llantoy, Noelia
  • Zsembinszki, Gabriel
  • Palomba, Valeria
  • Frazzica, Andrea
  • Dallapiccola, Mattia
  • Trentin, Federico
  • Cabeza, Luisa F.
With the aim of contributing to achieving the decarbonization of the energy sector, the environmental impact of an innovative system to produce heating and domestic hot water for heating demand-dominated climates is assessed is evaluated. The evaluation is conducted using the life cycle assessment (LCA) methodology and the ReCiPe and IPCC GWP indicators for the manufacturing and operation stages, and comparing the system to a reference one. Results show that the innovative system has a lower overall impact than the reference one. Moreover, a parametric study to evaluate the impact of the refrigerant is carried out, showing that the impact of the overall systems is not affected if the amount of refrigerant or the impact of refrigerant is increased., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 768824 (HYBUILD). This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31–MCIU/AEI/FEDER, UE) and by the Ministerio de Ciencia, Innovación y Universidades–Agencia Estatal de Investigación (AEI) (RED2018-102431-T). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

State of art of PCM for air conditioning and refrigeration

  • Cabeza, Luisa F.
Vision: Being a reference group of engineering at an international level, always linked to the University of Lleida. Mission: Propose solutions to the industry in the fields of sustainability, energy engineering and control, through research, technology transfer and training. Objectives: Improve existing knowledge through research and innovation ; Help increase the competitiveness of companies through collaborations, whether for the design of new products or as a technology consultancy, This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE), the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T), and the Secretaria de Universitats i Recerca of the Departament d'Empresa i Coneixement of the Generalitat de Catalunya (2019 PROD 00101 (AGAUR/FEDER)). Funding has also been received from European Union’s Horizon 2020 research and innovation programs under projects, HYBUILD (768824), SWS-HEATING (764025). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

A detailed energy analysis of a novel evaporator with latent thermal energy storage ability

  • Mselle, Boniface Dominick
  • Zsembinszki, Gabriel
  • Vérez, David
  • Borri, Emiliano
  • Cabeza, Luisa F.
The direct integration of phase change materials (PCM) into refrigeration and air conditioning systems through compact modules is an identified literature gap. In response to the literature gap, this paper provides a detailed energy analysis of a novel compact thermal energy storage module, that allows its direct integration into a refrigeration system as the evaporator. The study addresses key aspects of thermal energy storage (TES) and heat transfer mechanism that complement the previous analyses of the novel concept. Here the total energy stored in the module (including in all auxiliary parts), the charging/discharging power, and the behaviour of the module when used as a TES module and as a heat exchanger (HEX) are assessed. The results demonstrate the feasibility of the module to work as a TES and as a HEX. When working as a TES, complete charging and discharging was achieved, and 54% of the total energy was stored in the PCM although the PCM only accounts for around 14% of the total mass. Moreover, the highest charging/discharging power was obtained within the temperature range where most of the phase change occurred. When the module works as a HEX, it initially charges/discharges partially until a thermal equilibrium is achieved and the level of charge responds to the variation in the energy supply and demand., This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE) and by the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREiA (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme. Boniface Dominick Mselle would like to thank Programa Santander Predoc UdL for his research fellowship.
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Social Acceptance of TES

  • Cabeza, Luisa F.
This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE), Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T - MCIU/AEI), Agencia Estatal de Investigación (AEI) - Ministerio de Ciencia, Innovación y Universidades (PCI2020-120695- 2/AEI/10.13039/501100011033), and Secretaria de Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya and is co-financed by the European Union through the European Regional Development Fund (FEDER) (2019PROD00101). Funding has also been received from European Union’s Horizon 2020 research and innovation programs under projects Innova MicroSOLAR (723596), HYBUILD (768824), SWS-HEATING (764025), SolBio-Rev (814945), CSPplus (Cofund ERA-NET Action, N° 838311), and CO-COOL (101007976). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537) and the ICREA Catalan institution for awarding the ICREA Academy, for the second consecutive time. GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Desarrollo de una herramienta computacional de simulación de sistemas de almacenamiento térmico (TES) para plantas de concentración solar (Nit Europea de la Recerca 2023)

  • Tagle-Salazar, Pablo D.
¿Qué es un Sistema de Almacenamiento de Energía Térmica? Sistema que “guarda” energía en forma de calor en períodos de alta producción (día) para usarlo como fuente en períodos de alta demanda (noche). Esto permite obtener una generación de potencia más estable, disminuyendo los efectos de la intermitencia solar., Este trabajo está parcialmente financiado por el Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (AEI) (PID2021-123511OB-C31-MCIN/AEI/10.13039/501100011033/FEDER, UE) y el Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2022-134219-T). Los autores agradecen al Gobierno de Cataluña la acreditación de calidad concedida al grupo de investigación GREiA (2021 SGR 01615). GREiA es un agente certificado TECNIO en la categoría de desarrolladores tecnológicos del Gobierno de Cataluña. Este trabajo está parcialmente apoyado por ICREA dentro del programa ICREA Academia. El proyecto NitRecerCat (GA 101061189) está cofinanciado por el programa de investigación e innovación Horizonte Europa de la Unión Europea.
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Soluciones de almacenamiento de energía térmica para edificios (vídeo)

  • Vérez, David
Este trabajo está parcialmente financiado por el Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (AEI) (PID2021- 123511OB-C31 - MCIN/AEI/10.13039/501100011033/FEDER, UE) y el Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). Los autores agradecen al Gobierno de Cataluña la acreditación de calidad concedida al grupo de investigación GREiA (2017 SGR 1537). GREiA es un agente certificado TECNIO en la categoría de desarrolladores tecnológicos del Gobierno de Cataluña. Este trabajo está parcialmente apoyado por ICREA dentro del programa ICREA Academia. El proyecto NitRecerCat (GA 101061189) está cofinanciado por el programa de investigación e innovación Horizonte Europa de la Unión Europea.
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Desarrollo y prueba de un nuevo módulo de hormigón como material de almacenamiento de energía térmica para plantas de concentración solar de potencia (vídeo)

  • Cofré-Toledo, Jonathan
• La tecnología de Concentración Solar de Potencia (CSP) puedo almacenar calor y transformarlo en electricidad durante el día y la noche. • La radiación solar incide sobre espejos (helióstatos) que reflejan y concentran la luz en un receptor solar ubicado en la parte superior de una torre. • En el interior del receptor circula un fluido que absorbe el calor del sol alcanzando temperaturas de más de 550 ºC. • El fluido puede ser una sal fundida o un aceite sintético. El calor se puede almacenar en un bloque de hormigón y puede ser utilizado para generar vapor de agua a alta presión, el cual hará girar una turbina. • La turbina genera electricidad que se transmite a través de cables y postes hacia las ciudades e industrias., Este trabajo está parcialmente financiado por el Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (AEI) (PID2021- 123511OB-C31 - MCIN/AEI/10.13039/501100011033/FEDER, UE), la Agencia Estatal de Investigación (AEI) - Ministerio de Ciencia e Innovación (PCI2020-120695-2/AEI/10.13039/501100011033) y el Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). Los autores agradecen al Gobierno de Cataluña la acreditación de calidad concedida al grupo de investigación GREiA (2017 SGR 1537). GREiA es un agente certificado TECNIO en la categoría de desarrolladores tecnológicos del Gobierno de Cataluña. Este trabajo está parcialmente apoyado por ICREA dentro del programa ICREA Academia. El proyecto NitRecerCat (GA 101061189) está cofinanciado por el programa de investigación e innovación Horizonte Europa de la Unión Europea.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Lithium compounds for thermochemical energy storage: A state-of-the-art review and future trends

  • Marín, Paula E.
  • Milian, Yanio
  • Ushak, Svetlana
  • Cabeza, Luisa F.
  • Grágeda, Mario
  • Shire, G.S.F.
The world is currently going through significant changes in technology, and alongside these advances, new developments of strategies to store and supply energy are crucial for the widespread use of consumer electronics and white goods. Besides, the impacts of greenhouse gas emissions and climate change are exerting pressure towards less polluting sources of energy and strategies to diminish energy losses. In this environmental context, lithium compounds are an attractive alternative to store energy in thermal energy storage systems due to their thermodynamic features, which make such compounds a relevant strategy for energy storage, for instance, capturing residual energy from several industrial activities. Here a review of the current state of the art and new technological advances reflected by the scientific literature and the patented inventions using lithium as a relevant compound for thermochemical energy storage has been performed. Throughout a search on different databases, it is proposed a simplified process to support our findings and the analysis of this data. Thus, several important advances in thermochemical energy storage using chemical reaction and sorption systems were evidenced. The literature also showed that the majority of the analysed investigation included in our data set are based on sorption technologies. This review suggests the need for systematisation in reporting critical data to facilitate a common understanding with regards to the advances in energy storage, especially when referring to heat storage density. The importance of lithium in thermochemical systems in the future will probably keep increasing, particularly in systems where several lithium salts have shown to be excellent doping agents and working pairs of materials included in different matrices., Authors acknowledge to ANID/FONDAP Nº 15,110,019, CONICYT/PCI/REDES Nº170131 projects. Paula E. Marín would like to thank the National Agency for Research and Development (ANID)/Scholarship Program/Postdoctorado en el Extranjero Becas Chile/2019–74200057. Yanio Milian would like to thank ANT1885, CORFO 16ENI2-71940 INGENIERIA2030 and Postdoctoral/FONDECYT N° 3200786 projects. This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE) and by the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). The author at the University of Lleida would like to thank the Catalan Government for the quality accreditation given to their research group GREiA (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme. The authors would like to acknowledge the support of InnovateUK through their funding of T-ERA facilities at the University of Warwick.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Industrial waste heat estimation for the manufacturing industry in Chile

  • Fernández, Ángel G.
  • Soler, D.
  • Miró, Laia
  • Labidi, Arbia
  • Cabeza, Luisa F.
Chile is one of the countries with most growing industries worldwide due to their mining and manufacturing industries. Nevertheless, at the same time there is a lack on energy generation and processes efficiency. The objectives of this paper are to estimate the amount of available industrial waste heat derived from the manufacturing industry in Chile, to locate these heat sources geographically, to assess the best technologies to be used to take advantage of this heat, and finally, to estimate the environmental savings of its reuse. Results showed that the sectors with the highest potential for the use of residual heat are food and beverages with an average accumulated potential of 62.9 PJ, basic metals with 21.5 PJ, chemical products with 15.1 PJ, paper products with 10.8 PJ, and non-metallic minerals with 10.6 PJ. With these data, the energy generation in Chile could be more efficient as well as the industrial processes could save more energy, reducing costs and raw materials., Dr. Angel G. Fernández wants to acknowledgement the fnancial support from RyC 2020-28787-I funded by MCIN/ AEI/https://doi.org/10.13039/501100011033 and ESF “Investing in your future”. The work is partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849- B-C31—MCIU/AEI/FEDER, UE) and by the Ministerio de Ciencia, Innovación y Universidades—Agencia Estatal de Investigación (AEI) (RED2018-102431-T). This work is partially supported by ICREA under the ICREA Academia programme. Dr. Cabeza would like to thank the Catalan Government for the quality accreditation given to her research group GREiA (2017 SGR 1537). GREiA is a certifed agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Experimental analysis of a latent thermal energy storage system enhanced with metal foam

  • Tarragona Roig, Joan
  • Beyne, Wim
  • Gracia Cuesta, Alvaro de
  • Cabeza, Luisa F.
  • De Paepe, Michel
Worldwide, the energy consumption of refrigeration systems increased by 50% in the last 20 years. Currently, active refrigeration systems are often used to maintain cold chains in industry. However, there are remarkable drawbacks in the operation of active systems such as susceptibility to blackouts in the power supply and vibrations during their operation. Therefore, to overcome the aforementioned problems, passive cold chain transport using latent thermal energy storage systems arose as a potential solution. However, these systems require long charging times due to the low thermal conductivity of most phase change materials. In that sense, this paper presents a novel design of a cold storage battery with metal foam enhanced phase change material. The peak efflux of energy and solidification time of the battery is correlated as a function of the inlet temperature and mass flow rate of the heat transfer fluid with a root mean square deviation of 11.4%. The solidification time prediction allows determining the geometry which results in the maximum efflux of energy density for a given energy density. Moreover, the cold battery is placed in an insulated container to analyse its performance during transport. Results show that the tested refrigeration battery can act as a standalone refrigeration system during 15 h. However, improvements in the design of the insulated container are suggested to increase the performance of the system along the discharging cycle., This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018–093849-B-C31 - MCIU/AEI/FEDER, UE) and by the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018–102431-T). The authors at the University of Lleida would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is a certified TECNIO agent in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme. Wim Beyne received funding from a Ph.D. fellowship strategic basic research of the Research Foundation - Flanders (FWO) (1S08317N). This research was supported by Flanders Make, the strategic research centre for the manufacturing industry, Belgium.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Anodic Protection Assessment Using Alumina-Forming Alloys in Chloride Molten Salt for CSP Plants

  • Fernández, Ángel G.
  • Cabeza, Luisa F.
The generation of a natural protective coating in alumina-forming alloys was analyzed using a ternary chloride molten salt as a thermal energy storage material for concentrated solar power (CSP) technology. The formation of the protective layer was monitored using electrochemical impedance spectroscopy (EIS). A protective layer model for the OCT alloy and a localized corrosion model for the OCI and OC4 alloys were obtained after 5 h of immersion. The corrosion rates calculated using the linear polarization technique (LPR), were 8.03, 21.55, and 7.61 mm/year for OC4, OCI, and OCT alloys, respectively. These results were confirmed by scanning electron microscopy and X-ray diffraction. Our analysis showed that MgAl2O4 was the main protective coating generated by the alumina-forming alloys., Angel G. Fernández would like to acknowledge the financial support from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant No 712949 (TECNIOspring PLUS) and from the Agency for Business Competitiveness of the Government of Catalonia. This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018- 093849-B-C31 - MCIU/AEI/FEDER, UE) and the Agencia Estatal de Investigación (AEI) of the Ministerio de Ciencia, Innovación y Universidades (RED2018-102431-T). The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREiA (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Methods for the determination of the state-of-charge of a thermal energy storage device

  • Zsembinszki, Gabriel
  • Vérez, David
  • Mselle, Boniface Dominick
  • Borri, Emiliano
  • Luisa F. Cabeza
This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 768824 (HYBUILD). This work is partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE) and the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018- 102431-T). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme. Boniface Dominick Mselle would like to thank Programa Santander Predoc UdL for his research fellowship.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Life cycle assessment (LCA) of a concentrating solar power (CSP) plant in tower configuration with different storage capacity in molten salts

  • Gasa, Gemma
  • Prieto, Cristina
  • López-Román, Antón
  • Cabeza, Luisa F.
Although studies on the levelized cost of energy (LCoE) of concentrating solar power (CSP) plants were published in recent years, these studies were not related to the environmental impact generated. To fill this literature gap, this study compares the environmental impacts generated by four tower solar thermal plants with different storage capacities, 3, 6, 9, and 17.5 equivalent hours in nominal conditions were considered, being the plant of 17.5 h, a plant in operation. Results show that the environmental impacts generated throughout its useful life decrease when storage capacity increases. But when the storage capacity goes from 9 h to 17.5 h, the impacts generated are practically the same. Of the four plants analyzed, the most environmentally efficient plant is the one with a storage capacity of 9 h., This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE) and by the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). This work is partially supported by ICREA under the ICREA Academia programme. The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Economic evaluation of a hybrid heating system in different climate zones based on model predictive control

  • Tarragona Roig, Joan
  • Fernàndez Camon, César
  • Cabeza, Luisa F.
  • Gracia Cuesta, Alvaro de
Thermal energy storage (TES) systems allow the user to store energy produced from renewable energy sources during lower consumption periods, and to consume it when the energy demand is higher. Moreover, the use of TES systems encourages the user to take advantage of the time-of-use (ToU) tariff structures in the electricity market. Framed in this goal, the present paper evaluated the economic impact of a novel model predictive control (MPC) strategy that employed an inner control algorithm (ICA) to contribute in the cost electricity reduction of 17 different climate zones while the accuracy in results was mproved and the computational effort was maintained. The studied system was composed of an air-to-water heat pump (HP), photovoltaic (PV) panels, and a water TES tank. Its response was based on forecasting the weather conditions, grid electricity price, and heating demand as a dynamic controller. Its economic benefits were compared against a rule-based control (RBC) method and an ON/OFF strategy. The results showed that a good operation of the system was strongly linked with proper sizing of the water TES tank and PV panels, especially in the coldest zones. Nevertheless, using the proposed MPC strategy with its ICA, the system was able to reduce the energy cost between 16% and 22% in most heating demanding climates compared to the RBC strategy and between 17% and 46% compared to the ON/OFF one. Moreover, the energy purchased from the electricity grid during on-peak periods decreased dramatically with the MPC strategy, reaching around 90% reduction in almost all studied climates., This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE) and the Agencia Estatal de Investigación (AEI) (RED2018-102431-T). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is a certified TECNIO agent in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Optimizing the discharge process of a seasonal sorption storage system by means of design and control approach

  • Crespo, Alicia
  • Frazzica, Andrea
  • Fernàndez Camon, César
  • Gracia Cuesta, Alvaro de
Sorption thermal energy storage systems have higher energy densities and low long-term thermal losses compared to traditional energy storage technologies, which makes them very attractive for seasonal heat storage application. Although they have a lot of potential at material level, its operation and system implementation for residential application requires further study. The performance of a seasonal sorption thermal energy storage system strongly depends on the discharging process during the cold season. The present study analysed through numerical simulations different scenarios to enhance the thermal performance of a solar-driven seasonal water-based sorption storage, which supplied space heating and domestic hot water to a single-family house in a cold climate region. All studied scenarios were analysed under optimal control policy. The results indicated that the sorption storage could increase by 9 % its energy density if conservative and constant discharging temperature set points are considered, due to fewer interruptions during the discharge. The energy density of the sorption storage driven by solar energy was highly impacted by the weather conditions, and by the type and availability of low-temperature heat source. Indeed, the energy density of the sorption storage increased by 22 % using a water tank to assist the evaporator of the sorption storage, instead of a latent storage tank. The use of a dry-heater to assist the evaporator with environmental heat was not suitable for the climate studied due to the low hours of operation. The sorption storage system composed of 20 modules of LiCl-silica gel could obtain an energy density and a COP of 139 kWh/m3 and 0.39, respectively, if a constant low-temperature heat source (i.e, geothermal or waste energy) was available., This work was partially funded by the Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (PID2021-123511OB-C31 - MCIN/AEI/10.13039/501100011033/FEDER, EU) and by the Ministerio de Ciencia, Innovación y Universidades—Agencia Estatal de Investigación (AEI) (RED2018-102431-T). This work is partially supported by ICREA under the ICREA Academia programme. The authors would also like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. Alicia Crespo would also like to acknowledge the financial support of the FI-SDUR grant from the AGAUR of the Generalitat de Catalunya and Secretaria d'Universitats i Recerca del Departament d'Empresa i Coneix-ement de la Generalitat de Catalunya. Alvaro de Gracia wants to thank the Serra Hunter Programme for its position at University of Lleida.
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Recent trends and future perspectives on the use of phase change materials for thermal energy storage (CIES 2022)

  • Cabeza, Luisa F.
  • Borri, Emiliano
Vision: Being a reference group of engineering at an international level, always linked to the University of Lleida. Mission: To propose solutions to the industry in the fields of sustainability, energy engineering and control, through research, technology transfer and training. Objectives: To improve existing knowledge through research and innovation ; To help increase the competitiveness of companies through collaborations, whether for the design of new products or as a technology consultancy., This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31-MCIU/AEI/FEDER,UE), Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T-MCIU/AEI), Agencia Estatal de Investigación (AEI) - Ministerio de Ciencia, Innovación y Universidades (PCI2020-120695-2/AEI/10.13039/501100011033). Funding has also been received from European Union’s Horizon 2020 research and innovation program sunder projects SWS-HEATING (764025), CO-COOL (101007976), and CSPplus (CofundERA-NETAction, N°838311) The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017SGR1537) and the ICREA Catalan institution for awarding the ICREA Academy, for these condconsecutive time. GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Experimental analysis of a small size vacuum insulated water tank

  • Borri, Emiliano
  • Vérez, David
  • Zsembinszki, Gabriel
  • Dawoud, Belal
  • Cabeza, Luisa F.
This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 764025 (SWS-HEATING). This work is partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE) and the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Recent trends and future perspectives on the use of phase change materials for thermal energy storage (EIRES 2022)

  • Cabeza, Luisa F.
  • Borri, Emiliano
Vision: Being a reference group of engineering at an international level, always linked to the University of Lleida. Mission: To propose solutions to the industry in the fields of sustainability, energy engineering and control, through research, technology transfer and training. Objectives: To improve existing knowledge through research and innovation ; To help increase the competitiveness of companies through collaborations, whether for the design of new products or as a technology consultancy, This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31-MCIU/AEI/FEDER,UE), Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T-MCIU/AEI), Agencia Estatal de Investigación (AEI) - Ministerio de Ciencia, Innovación y Universidades (PCI2020-120695-2/AEI/10.13039/501100011033). Funding has also been received from European Union’s Horizon 2020 research and innovation program sunder projects SWS-HEATING (764025), CO-COOL (101007976), and CSPplus (CofundERA-NETAction, N°838311) The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017SGR1537) and the ICREA Catalan institution for awarding the ICREA Academy, for these condconsecutive time. GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

New phase change material storage concept including metal wool as heat transfer enhancement method for solar heat use in industry

  • Prieto, Cristina
  • Rubio, Carlos
  • Cabeza, Luisa F.
Thermal energy storage is recognized as a key technology in the energy transition the world is facing today. But the main technical barrier this technology has to achieve wider deployment the low thermal conductivity of the materials used, the so-called phase change materials (PCM). This paper presents a new concept for thermal conductivity enhancement of a PCM tank using metal wool. Metal wool is one of the least studied method to enhance PCM thermal conductivity, while it has high potential to do so at a low cost. This study shows the experimental prototype that developed for the validation of the effective conductivity of the composite formed by NaNO3 salts and metal wool. The metal wool used is produced and arranged to ensure the right porosity and packaging to increase 300% the effective thermal conductivity of the mixture. The model validated confirms the movement of the fluid during the melting standardizes the temperature of the molten material, increasing the transference. The model also validates the new composite, with wool and NaNO3 as PCM, as one of the most promising materials to be used in applications that need heat to be stored at around 280-300 °C. Such applications include use of solar energy and waste heat in industry., The research leading to these results has received funding from CDTI in the project Innterconecta Thesto (ITC-20111050). The work partially funded by the by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE). This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). Dr. Cabeza would like to thank the Catalan Government for the quality accreditation given to her research group GREiA (2017 32 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Use of reinforcement learning to optimize the control of solar thermal collectors coupled to seasonal thermal energy storage

  • Crespo, Alicia
  • Gracia Cuesta, Alvaro de
  • Vérez, David
  • Cabeza, Luisa F.
  • Fernàndez Camon, César
This work is partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE) and the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme. This project has received funding from the European Union´s Horizon 2020 research and innovation programme under the No 764025 (SWS-Heating). Alicia Crespo would also like to acknowledge the financial support of the FI-SDUR grant from the AGAUR of the Generalitat de Catalunya and Secretaria d’Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Techno-economic analysis of a concrete storage concept for parabolic trough solar power plants

  • Prieto, Cristina
  • Pino, Francisco Javier
  • Cabeza, Luisa F.
In an energy transition towards 100 % renewable electricity, concentrating solar power (CSP) with thermal energy storage (TES) should be deployed on a wide scale due to the dispatchability capacity of this technology. To achieve this, a decrease of its levelized cost of electricity (LCOE) is essential. This paper evaluates the technoeconomic potential of a CSP plant with high temperature concrete as TES system compared to the standard commercial molten salts system. The general plant design includes creating a bank of metal tubes enclosed by concrete in a modular configuration, aiming to maximize the performance of the plant (e.g., reducing parasitics). Nevertheless, the results proved that the selected configuration underperforms during the discharge phase in nominal conditions. Despite existing expectations, this study shows the prevalence of the current molten salt TES system as a better solution over the high temperature optimized concrete configuration studied.
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Definition of key performance indicators (KPIs) to evaluate innovative storage systems in concentrating solar power (CSP) plants

  • Cabeza, Luisa F.
  • Borri, Emiliano
  • Gasa, Gemma
  • Zsembinszki, Gabriel
  • López-Román, Antón
  • Prieto, Cristina
The increasing penetration of renewable energies into the energy system is leading to significant development and deployment of generation plants based on the use of solar energy. On large scale, concentrating solar power (CSP) plants is the starring technology. In those systems, thermal energy storage (TES) is an essential component that allows both providing dispatchability and increasing power production thus improving the plant efficiency and reducing both its size and cost. Current storage technologies are mainly based on solar salts (molten salts) and saturated steam, their main drawback being their operating temperatures. Therefore, the current challenge is to develop innovative solutions that allow CSP plants to work at higher temperatures to increase their efficiency. In order to allow the comparison of new TES concepts, the definition of proper key performance indicators (KPIs) helps to better identify the best storage solutions. This paper reports a preliminary selection of KPIs suitable for TES systems and their validation against the commercially available two-tanks molten salts storage concept for a 100 MW net capacity CSP tower plant to allow the comparison with innovative solutions. The results of this study can be used as a basis for comparison of TES technologies with the available ones, as well as to set the target for the research and development of future storage solutions., CSPplus is supported under the umbrella of CSP-ERA-Net 1st Cofund Joint Call by AEI - Spanish Ministry of Science, Innovation and Universities, TÜBITAK - Scientific and Technological Research Council of Turkey, and CSO - Israeli Ministry of Energy. CSP-ERA-Net is supported by the European Commission within the EU Framework Programme for Research and Innovation HORIZON 2020 (Cofund ERA-NET Action, N° 838311) and this work was partially funded by Agencia Estatal de Investigación (AEI) - Ministerio de Ciencia, Innovación y Universidades (PCI2020-120695-2/AEI/10.13039/501100011033), and Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE) and by the Ministerio de Ciencia, Innovación y Universidades-Agencia Estatal de Investigación (AEI) (RED2018-102431-T- AEI). This work is partially supported by ICREA under the ICREA Academia programme. The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Life Cycle Assessment (LCA) of a Concentrating Solar Power (CSP) Plant in Tower Configuration with and Without Thermal Energy Storage (TES)

  • Gasa, Gemma
  • López-Román, Antón
  • Prieto, Cristina
  • Cabeza, Luisa F.
Despite the big deployment of concentrating solar power (CSP) plants, their environmental evaluation is still a pending issue. In this paper, a detailed life cycle assessment (LCA) of a CSP tower plant with molten salts storage in a baseload configuration is carried out and compared with a reference CSP plant without storage. Results show that the plant with storage has a lower environmental impact due to the lower operational impact. The dependence on grid electricity in a CSP tower plant without storage increases its operation stage impact. The impact of the manufacturing and disposal stage is similar in both plants. When analyzed in detail, the solar field system and the thermal energy storage (TES) and heat transfer fluid (HTF) systems are the ones with higher impact. Within the storage system, the molten salts are those with higher impact. Therefore, in this study the impact of the origin of the salts is evaluated, showing that when the salts come from mines their impact is lower than when they are synthetized. Results show that storage is a key element for CSP plants not only to ensure dispatchability but also to reduce their environmental impact., This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31) and by the Ministerio de Ciencia, Innovación y Universidades-Agencia Estatal de Investigación (AEI) (RED2018-102431-T). This work is partially supported by ICREA under the ICREA Academia programme.
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Avaluació de la configuració de diferents plantes de concentració solar (CSP) mitjançant eines d’avaluació del cicle de vida (ACV) (vídeo)

  • Gasa, Gemma
Totes les tecnologies de concentració solar (CSP) utilitzen una configuració per concentrar l’energia de la llum solar en un receptor i convertir-la en calor. L'energia tèrmica es pot utilitzar per crear vapor que condueixi una turbina per produir energia elèctrica o es pot utilitzar com a procés industrial de calor., Aquest treball està parcialment finançat pel el Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (AEI) (PID2021-123511OB-C31 - MCIN/AEI/10.13039/501100011033/FEDER, UE) i pel Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). Els autors agraeixen al Govern de Catalunya l‟acreditació de qualitat concedida al grup de recerca GREiA (2017 SGR 1537). GREiA és un agent certificat TECNIO dins la categoria de desenvolupadors tecnològics del Govern de Catalunya. Aquest treball està parcialment recolzat per ICREA dins del programa ICREA Acadèmia. El projecte NitRecerCat (GA 101061189) està cofinançat pel programa de recerca i innovació Horitzó Europa de la Unió Europea.
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Recent trends and future perspectives on the use of phase change materials for thermal energy storage (CNIT 2022)

  • Cabeza, Luisa F.
  • Borri, Emiliano
Vision: Being a reference group of engineering at an international level, always linked to the University of Lleida. Mission: To propose solutions to the industry in the fields of sustainability, energy engineering and control, through research, technology transfer and training. Objectives: To improve existing knowledge through research and innovation ; To help increase the competitiveness of companies through collaborations, whether for the design of new products or as a technology consultancy., This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31-MCIU/AEI/FEDER,UE), Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T-MCIU/AEI), Agencia Estatal de Investigación (AEI) - Ministerio de Ciencia, Innovación y Universidades (PCI2020-120695-2/AEI/10.13039/501100011033). Funding has also been received from European Union’s Horizon 2020 research and innovation program sunder projects SWS-HEATING (764025), CO-COOL (101007976), and CSPplus (CofundERA-NETAction, N°838311) The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017SGR1537) and the ICREA Catalan institution for awarding the ICREA Academy, for these condconsecutive time. GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Energia renovable, nova economia i abandonament o reforçament dels petits municipis

  • Cabeza, Luisa F.
  • Zsembinszki, Gabriel
  • Gasa, Gemma
Aquest treball està parcialment finançat pel Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 (FEDER)), Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T), Agencia Estatal de Investigación (AEI) - Ministerio de Ciencia, Innovación y Universidades (PCI2020-120695- 2/AEI/10.13039/501100011033), y Secretaria de Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya i és co-finançat per la Unió Europea a través del Fons Europeu de Desenvolupament Regional (FEDER) (2019PROD00101). També s’ha rebut finançament de l’Horitzo 2020 de l’Unió Europea dins de programes de recerca i innovació amb els projectes Innova MicroSOLAR (723596), HYBUILD (768824), SWSHEATING (764025), SolBio-Rev (814945) i CSPplus (Cofund ERA-NET Action, N° 838311). Agraïr també al Govern Català per l’acreditació de qualitat donada al grup de recerca (2017 SGR 1537) i a la institució catalana ICREA per la concessió de l’ICREA Acadèmia, per segona vegada consecutiva. GREiA és agent certificat TECNIO en la categoria de desenvolupadors de tecnologia de la Generalitat de Catalunya.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Life cycle assessment of the inclusion of phase change materials in lightweight buildings

  • Vega, Mariela
  • Llantoy, Noelia
  • Chàfer, Marta
  • Ushak, Svetlana
  • Cabeza, Luisa F.
This research evaluates environmental impact of including phase change materials in the envelope of lightweight buildings constructed off-site with dimensions 2.5 × 2.5 × 2.43 m3, located in the cities of Antofagasta and Calama, both in Chile. These cities are located in a cold desert climate zone, corresponding to a K¨oppen Climate Classification subtype 'BWk', with an average annual temperature difference of 4.8 ◦C. To evaluate the environmental impact quantitatively from 'cradle to grave' life cycle assessment was used, it is a methodology based on International Organization for Standardization 14,040 and 14,044 standards. With this methodology, the manufacturing and operational phases and environmental payback period were evaluated. Results show that phase change materials addition in walls and roof of a building decreases electric energy (52.8 % in Antofagasta and 36.3 % in Calama) consumption and environmental impact while in operation, corresponding to 51.4 % and 84.4 % in the cities of Antofagasta and Calama, respectively. In addition, cubicles with phase change materials exhibit an environmental payback period below 15 %. Therefore, a decision of using phase change materials for lightweight buildings could be made in any subtype 'BWk' area of K¨oppen climate classification., This work has been funded by ANID (CONICYT) from Chile FONDECYT/REGULAR 1170675, FONDAP 15110019 and PCI/REDES N°170131 projects; from Spain by Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE), and Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). Mariela Vega acknowledges support by Doctorado en Ingeniería de Procesos de Minerales of Universidad de Antofagasta. Authors at University of Lleida would like to thank Catalan Government for quality accreditation given to their research group (2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Desarrollo de una herramienta computacional de simulación de sistemas de almacenamiento térmico (TES) para plantas de concentración solar (Nit Europea de la Recerca 2022)

  • Tagle-Salazar, Pablo D.
¿Qué es un Sistema de almacenamiento térmico? Un sistema que almacena energía en forma de calor para usarlo como fuente cuando su recurso primario no está disponible. Enfocado a concentración solar, la fuente es la radiación solar. Ventajas/Desventajas Principal desventaja: La planta solar puede generar electricidad en las noches o en días nublados. Principal desventaja: Altos costos (materiales, instalación, O&M)., Este trabajo está parcialmente financiado por el Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (PID2021- 123511OB-C31 - MCIN/AEI/10.13039/501100011033/FEDER, EU), la Agencia Estatal de Investigación (AEI) - Ministerio de Ciencia e Innovación (PCI2020-120695-2/AEI/10.13039/501100011033) y el Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). Los autores agradecen al Gobierno de Cataluña la acreditación de calidad concedida al grupo de investigación GREiA (2017 SGR 1537). GREiA es un agente certificado TECNIO en la categoría de desarrolladores tecnológicos del Gobierno de Cataluña. Este trabajo está parcialmente apoyado por ICREA dentro del programa ICREA Academia. El proyecto NitRecerCat (GA 101061189) está cofinanciado por el programa de investigación e innovación Horizonte Europa de la Unión Europea
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Advanced Concrete Steam Accumulation Tanks for Energy Storage for Solar Thermal Electricity

  • Prieto, Cristina
  • Pérez Osorio, David
  • Gonzalez-Roubaud, Edouard
  • Fereres, Sonia
  • Cabeza, Luisa F.
Steam accumulation is one of the most effective ways of thermal energy storage (TES) for the solar thermal energy (STE) industry. However, the steam accumulator concept is penalized by a bad relationship between the volume and the energy stored; moreover, its discharge process shows a decline in pressure, failing to reach nominal conditions in the turbine. From the economic point of view, between 60% and 70% of the cost of a steam accumulator TES is that of the pressure vessel tanks (defined as US$/kWhth). Since the current trend is based on increasing hours of storage in order to improve dispatchability levels in solar plants, the possibility of cost reduction is directly related to the cost of the material of pressure vessels, which is a market price. Therefore, in the present paper, a new design for steam accumulation is presented, focusing on innovative materials developed specifically for this purpose: two special concretes that compose the accumulation tank wall. Study of dosages, selection of materials and, finally, scale up on-field tests for their proper integration, fabrication and construction in prototype are the pillars of this new steam accumulation tank. Establishing clear and precise requirements and instructions for successful tank construction is necessary due to the highly sensitive and variable nature of those new concrete formulations., The research leading to these results has received funding from CDTI in the project Innterconecta Thesto (ITC-20111050). The work is partially funded by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER)). This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31—MCIU/AEI/FEDER, UE) and by the Ministerio de Ciencia, Innovación y Universidades—Agencia Estatal de Investigación (AEI) (RED2018-102431-T). This work is partially supported by ICREA under the ICREA Academia programme. Acknowledgments The authors would like to thank all the Chirivo Construcciones, Hormigones Aznalcóllar, Elabora, Azcatec, Next Force Engineering, Universidad de Granada, Aidico, Centro Andaluz de Metrología, AICIA and Abengoa teams involved in Solúcar Platform during prototype construction and start-up. Cabeza would like to thank the Catalan Government for the quality accreditation given to her research group GREiA (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Systematic review on the use of heat pipes in latent heat thermal energy storage tanks

  • Maldonado, José Miguel
  • Gracia Cuesta, Alvaro de
  • Cabeza, Luisa F.
This systematic review presents and discusses the previous research about hybrid devices which combine latent thermal energy storage (TES) technology and heat pipes. A bibliometric analysis of this issue shows how hybrid systems have globally grown popularity during time, providing details about the main researchers and research centres on this particular field. Then, the identified papers are assessed and categorized in two main sections, the experimental research carried out, and the numerical modelling of hybrid systems. Experimental research is later classified regarding the operating temperature range, and their final application. Numerical studies are also further categorized, accordingly to how heat pipes were modelled in this case. This review points out the lack of experimental studies at high temperatures, especially when many simulations extended their models (validated at low temperatures) to higher temperature designs. The paper provides details about the research performed, so the gap for future investigations can be spotted., This work was partially funded by the European Union's Horizon 2020 Research & Innovation Programme under Grant Agreement 723596 with reference name Innova MicroSolar. This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE) and by the Agencia Estatal de Investigación (AEI), of the Ministerio de Ciencia, Innovación y Universidades (RED2018-102431-T). José Miguel Maldonado would like to thank the Spanish Government for his research fellowship (BES-2016-076554). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is a certified TECNIO agent in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Thermal and mechanical performance of cement paste under high temperature thermal cycles

  • Boquera, Laura
  • Castro Chicot, José Ramón
  • Pisello, Anna Laura
  • Fabiani, Claudia
  • D'Alessandro, Antonella
  • Ubertini, Filippo
  • Cabeza, Luisa F.
Concrete is identified in the literature as a suitable material for thermal energy storage applications, with even innovative application potentials such as storage media in concentrating solar power plants. To ensure a suitable heat transfer among concrete components, the binder material of concrete (cement paste) require further research and understanding to this aim. In particular, the thermal stability of cement paste under temperature cycled conditions arises as a research gap. In this study, ordinary Portland and calcium aluminate cement types were selected using a low water-cement ratio. Thermo-mechanical properties were studied before and after 1, 10, and 25 or 50 thermal cycles at 200 ◦C, 400 ◦C, 600 ◦C, and 800 ◦C. Although ordinary Portland cement paste showed micro-cracking propagation after 25 thermal cycles from ambient temperature to 200 ◦C and 400 ◦C, both cement pastes preserved their integrity, being compressive strength higher in ordinary Portland cement. On the contrary, after 25 or 50 thermal cycles at 600 ◦C and 800 ◦C, only calcium aluminate cement preserved its integrity, while ordinary Portland cement revealed a fragmentation status. Despite the compressive strength decrease in calcium aluminate paste at 600 ◦C and 800 ◦C, as a result of porosity increase, the properties were maintained after 10 thermal cycles. However, thermal conductivity in calcium aluminate paste was reduced nearly 50% after the first cycle at temperatures higher than 200 ◦C., This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE) and by the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). The authors at University of Lleida would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme and by the Italian project SOS-CITTA′ supported by Fondazione Cassa di Risparmio di Perugia under grant agreement No 2018.0499.026. Laura Boquera acknowledgments are due to the PhD school in Energy and Sustainable Development from University of Perugia. Laura Boquera would like to acknowledge the financial support provided by UNIPG –CIRIAF InpathTES project. Also, the authors would like to thank the collaboration of the companies “Cementos Molins Industrial” and “PROMSA” for the material supplied in this research. Financial support of the UNIPG-CIRIAF team has been achieved from the Italian Ministry of University and Research (MUR) in the framework of the Project FISR 2019: “Eco Earth” (code 00245) and it is gratefully acknowledged.
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Desarrollo y optimización de nuevos PCM en base a sales inorgánicas, para su aplicación en sistemas de almacenamiento de energía térmica a altas temperaturas (vídeo) (Nit Europea de la Recerca 2022)

  • Martínez, Franklin R.
Las plantas de concentración solar de potencia CSP, son instalaciones industriales donde se aprovecha la radiación solar para producir energía eléctrica. Los rayos solares son reflejados desde una superficie extensa y concentrados en un solo punto (superficie reducida) para calentar el fluido calo portador (HTF) a una temperatura de 565ºC, este fluido caliente ingresa al intercambiador de calor donde cede al agua el calor acumulado, produciendo vapor, el cual ingresa a la turbina donde se genera energía eléctrica., F. Rodrigo Martínez Alcocer agradece a la Beca Doctorado Nacional para estudiantes extranjeros ANID 2021 Folio 21211932 por el apoyo financiero en la investigación. Los autores agradecen al Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (PID2021-123511OB-C31 - MCIN/AEI/10.13039/501100011033/FEDER, UE) y el Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). Los autores agradecen al gobierno de Cataluña la acreditación de calidad al grupo de investigación GREiA (2017 SGR 1537). GREiA tiene la acreditación como agente TECNIO en la categoría de desarrolladores tecnológicos del gobierno de Cataluña. También el presente trabajo tiene un apoyo de ICREA en el programa ICREA Academia. Este trabajo está cofinanciado por el programa de investigación e innovación Horizon Europe de la Unión Europea bajo el proyecto NitRecerCat (GA 101061189).
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Deep learning optimal control for a solar-biomass system for residential buildings

  • Zsembinszki, Gabriel
  • Fernàndez Camon, César
  • Borri, Emiliano
  • Cabeza, Luisa F.
Nowadays, it is well known that the reduction of energy consumption in buildings is crucial to achieve a substantial reduction of gas emission to the atmosphere and decrease the fast depletion of energy sources. Indeed, buildings are responsible for almost 40% of the overall energy consumption and gas emission into the atmosphere [1], therefore, immediate actions are needed. The reduction of the energy demand through passive solutions (i.e. building envelope) has been taking into account in directives such as the Energy Performance of Buildings Directive [2]. However, the generation of energy through efficient systems and the use of renewable sources is also required to achieve deep decarbonisation of the grid. However, the main disadvantage of renewable sources is represented by their daily and seasonal intermittency. Therefore, a system that allows the combination of more of them can provide a higher flexibility and increase the total share of renewables to meet energy needs in buildings., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 814945 (SolBio-Rev). This work was partially funded by Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE), Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T - MCIU/AEI). This work is partially supported by ICREA under the ICREA Academia programme. The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Thermo-acoustic and mechanical characterization of novel bio-based plasters: The valorisation of lignin as by-product from biomass extraction for green building applications

  • Boquera, Laura
  • Olacia, Elena
  • Fabiani, Claudia
  • Pisello, Anna Laura
  • D'Alessandro, Antonella
  • Ubertini, Filippo
  • Cabeza, Luisa F.
Every day a wide amount of wastes is generated and landfilled, without giving them any new use. Among these wastes, biomass gathered from nature, as agricultural or forest wastes are found. From collecting and treating this biomass, a new composite can be obtained, reducing its environmental footprint. In this context, the present study focuses on the use of lignin produced from a bio-residue collected from the Trasimeno lake (Italy), to form gypsum-based plasters for building applications. Several compositions were formulated considering two types of gypsum, different in purity and mechanical strength. The goal was to maximize the lignin content in a gypsum matrix maintaining acceptable mechanical and thermophysical performance. Lignin weight contents ranging from 0% (100% gypsum) to 100% (0% gypsum) were taken into account, considering also the proportions: 30-70%, 50-50%, 70-30%. Thermo-acoustic and mechanical characterization of these materials was carried out for the first time. Results showed that the thermal conductivity of the composites was closer to the only-lignin ones, resulting in promising thermal insulation results for building application. However, from an acoustical point of view, when increasing the lignin content, acoustic insulation decreased. In terms of mechanical performance, gypsum building plaster exhibited an improved performance with 50 and 70% lignin content, significantly outperforming all other studied gypsums., This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 – MCIU/AEI/FEDER, UE). This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades – Agencia Estatal de Investigación (AEI) (RED2018-102431-T). The authors at University of Lleida would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme and by the Italian project SOS-CITTA’ supported by Fondazione Cassa di Risparmio di Perugia under grant agreement No 2018.0499.026. Laura Boquera acknowledgments are due to the PhD school in Energy and Sustainable Development from University of Perugia.
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

The hidden use of lithium in thermal energy storage systems: a bibliometric study

  • Cabeza, Luisa F.
  • Borri, Emiliano
  • Zsembinszki, Gabriel
Vision: Being a reference group of engineering at an international level, always linked to the University of Lleida. Mission: To propose solutions to the industry in the fields of sustainability, energy engineering and control, through research, technology transfer and training. Objectives: To improve existing knowledge through research and innovation ; To help increase the competitiveness of companies through collaborations, whether for the design of new products or as a technology consultancy., This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE), the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T) Funding has also been received from European Union’s Horizon 2020 research and innovation programs under project CO-COOL (101007976). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Experimental evaluation of the thermal degradation of solar salt under different gas covers

  • Prieto, Cristina
  • López-Román, Antón
  • Cabeza, Luisa F.
Commercial concentrating solar power (CSP) plants use solar salt (60-40 wt% NaNO3-KNO3) as thermal energy storage media due to its proven performance. Nevertheless, at high temperatures its decomposition can become a problem, hindering the possibility to rise operating temperatures. Therefore, this paper studies the decomposition of solar salt using different cover gases, dry air and oxygen. Results show that the use of oxygen as cover gas, instead the commercially used dry air, slows down the thermal decomposition of solar salt, reducing the amount of NOx and nitrites formation., This work was partially funded by the Ministerio de Ciencia e Innovación de España [(ITC-20111061-FEDER-Innterconecta-Composol) (PID2021-123511OB-C31 - MCIU/AEI/FEDER, UE) (TED2021-132216A-I00)] and by the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). The authors would like to thank the Department of Chemical Engineering in the University of Huelva. The authors at University of Lleida would like to thank the Catalan Government for the quality accreditation given to their research group GREiA (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Trends and future perspectives on the integration of phase change materials in heat exchangers

  • Mselle, Boniface Dominick
  • Zsembinszki, Gabriel
  • Borri, Emiliano
  • Vérez, David
  • Cabeza, Luisa F.
Traditional review papers provide mainly qualitative information, missing to show the volume, trends, and major contributions in a topic. In response to that, this paper asseses both quantitative and qualitative information regarding the implementation of thermal energy storage using phase change materials in heat exchangers. The data were retrieved from the Scopus database using specific queries relevant to the topic. To investigate the state-of-the-art and research gaps, a keywords analysis was carried out highlighting relevant connections among the major keywords. Moreover, a bibliometric analysis was performed to obtain the trends on the number of publications per year, type of document, authors, affiliation, geographical distribution, journals of publication, and subject areas of research. Based on the keywords and bibliometric analyses, this paper highlights the major contributions and research gaps on the topic., This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE) and by the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREiA (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme. Boniface Dominick Mselle would like to thank Programa Santander Predoc UdL for his research fellowship.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Embodied energy and embodied carbon of structural building materials: Worldwide progress and barriers through literature map analysis

  • Cabeza, Luisa F.
  • Boquera, Laura
  • Chàfer, Marta
  • Vérez, David
Climate change mitigation is a recurrent consciousness topic among society and policymakers. Actions are being adopted to face this crucial environmental challenge, with a rising concern with a big impact on the building sector. Construction materials have a high carbon footprint as well as an energy- intensive activity. To measure the environmental damage and effects, life cycle assessment (LCA) is the methodology most widespread. However, the LCA methodology itself and the assumptions done to carry it out leads to a generalized burden to compare the case studies outcomes. LCA method and for instance geographical location are incompatibilities also revealed in embodied energy and embodied carbon assessments. Urgent actions are needed to clarify the confusions arisen in the research, considering a detailed study on the embodied energy and embodied carbon values. From a material level point of view, this paper aims to illustrate the chronological overview of embodied energy and embodied carbon through keywords analysis. Moreover, to support and corroborate the analysis, an organized summary of the literature data is presented, reporting the range of embodied energy and embodied carbon values up to now. This systematic analysis evidences the lack of standardization and disagreement regarding the assessment of coefficients, database source, and boundary system used in the methodology assessment., This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE) and by the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREiA (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Experimental devices to investigate the long‐term stability of phase change materials under application conditions

  • Rathgeber, Christoph
  • Hiebler, Stefan
  • Bayón, Rocío
  • Cabeza, Luisa F.
  • Zsembinszki, Gabriel
  • Englmair, Gerald
  • Dannemand, Mark
  • Diarce, Gonzalo
  • Fellmann, Oliver
  • Ravott, Rebecca
  • Groulx, Dominic
  • Kheirabadi, Ali C.
  • Gschwander, Stefan
  • Höhlein, Stephan
  • König-Haagen, Andreas
  • Baupere, Noé
  • Zalewski, Laurent
An important prerequisite to select a reliable phase change material (PCM) for thermal energy storage applications is to test it under application conditions. In the case of solid-liquid PCM, a large amount of thermal energy can be stored and released in a small temperature range around the solid-liquid phase transition. Therefore, to test the long‐term stability of solid-liquid PCM, they are subjected to melting and solidification processes taking into account the conditions of the intended application. In this work, 18 experimental devices to investigate the long‐term stability of PCM are presented. The experiments can be divided into thermal cycling stability tests, tests on PCM with stable supercooling, and tests on the stability of phase change slurries (PCS). In addition to these experiments, appropriate methods to investigate a possible degradation of the PCM are introduced. Considering the diversity of the investigated devices and the wide range of experimental parameters, further work toward a standardization of PCM stability testing is recommended., This survey has been carried out within the framework of IEA ES Annex 33/SHC Task 58 “Material and Component Development for Compact Thermal Energy Storage”, a joint working group of the “Energy Storage” (ES) and the “Solar Heating and Cooling” (SHC) Technology Collaboration Programmes of the International Energy Agency (IEA). The responsibility for the content of this publication is with the authors. The work of ZAE Bayern is part of the project properPCM and was supported by the German Federal Ministry of Economic Affairs and Energy under the project code 03ET1342A. The work of CIEMAT is part of two projects: ACES2030 (S2018/EM-4319) which is supported by Comunidad de Madrid and European Structural Funds through and SFERA III (GA No 823802) which is supported by European Union’s Horizon H2020 Research and Innovation Programme. The work of DTU was supported by HM Heizkörper GmbH and the Danish Energy Agency through the EUDP program. The work of EHU is part of the project Sweet-TES (RTI2018-099557-B-C22), funded by the Spanish Ministry of Science, Innovation and Universities. The work of GREiA was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31—MCIU/AEI/FEDER, UE) and by the Ministerio de Ciencia, Innovación y Universidades—Agencia Estatal de Investigación (AEI) (RED2018-102431-T). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (GREiA 2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme. The work of HSLU was partially funded by the Swiss Competence Centre for Energy Research on Heat and Electricity (SCCER HaE). The authors would like to thank the SCCER HaE as well as METTLER TOLEDO AG for the support given. The work of Fraunhofer ISE was part of the projects KOLAN (FKZ 03ESP357B) and KOKAP (FKZ 03ET1463A) which were administrated by the Projektträger Jülich (PtJ) and funded by the German Federal Ministry of Economic Affairs and Energy. The work of LAMTE was supported by Intel Corporation, along with the Natural Sciences and Engineering Research Council of Canada (NSERC) and the Canada Foundation for Innovation. The work of LGCgE is partly funded by the French National Research Agency (ANR) under the project "Hybrid storage and heat exchanger device with PCM—EUROPA". Noé Beaupere’s PhD work was funded by the French Alternative Energies and Atomic Energy Commission (CEA) Grenoble. The work of LTTT is part of the project MALATrans and was funded by the German Federal Ministry for Economic Affairs and Energy (BMWi) under the project code 03ESP227B.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Research progress and trends on the use of concrete as thermal energy storage material through bibliometric analysis

  • Boquera, Laura
  • Castro Chicot, José Ramón
  • Pisello, Anna Laura
  • Cabeza, Luisa F.
A landmark review of concrete as thermal energy storage material is presented through a bibliometric analysis approach. This study shows influential literature and the current relevant research directions. Geographical source and the identification of the significant publications enable determining the leading authors and research groups of the topic. The methodology is based on an accurately defined query, composed of remarkable keywords for the study. Two queries are set out, the first one from a holistic point of view of the topic, while the second one has a special consideration on concrete as TES under high-temperature conditions. Most part of the literature research pays attention to concrete applications in buildings, while other applications such as solar energy are in the rear face. Throughout the years, great interest in latent heat storage technology is observed using phase change material (PCM), implementing them in concrete mixtures or in other formats integrated into a building component. Despite the fact that the area of research is currently in prominent development, some literature gaps and new research directions are identified. Concepts such as climate change mitigation, concrete components, maintenance, are possible in-progress initiatives which need to be further studied., This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018–093849-B-C31 - MCIU/AEI/FEDER, UE) and by the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018–102431-T). The authors at the University of Lleida would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia program. A.L. Pisello thanks the Italian project SOS-CITTA’ supported by Fondazione Cassa di Risparmio di Perugia under grant agreement No. 2018.0499.026.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Compressed Air Energy Storage—An Overview of Research Trends and Gaps through a Bibliometric Analysis

  • Borri, Emiliano
  • Tafone, Alessio
  • Comodi, Gabriele
  • Romagnoli, Alessandro
  • Cabeza, Luisa F.
Electrical energy storage systems have a fundamental role in the energy transition process supporting the penetration of renewable energy sources into the energy mix. Compressed air energy storage (CAES) is a promising energy storage technology, mainly proposed for large-scale applications, that uses compressed air as an energy vector. Although the first document in literature on CAES appeared in 1976 and the first commercial plant was installed in 1978, this technology started to gain attention only in the decade 2000–2010, with remarkable scientific production output and the realization of other pre-commercial demonstrators and commercial plants. This study applies bibliometric techniques to draw a picture of the current status of the scientific progress and analyze the trend of the research on CAES and identify research gaps that can support researchers and manufacturers involved in this entering technology. Recent trends of research include aspects related to the off-design, the development of thermal energy storage for adiabatic CAES, and the integration of CAES with combined heating and cooling systems., This work is partially funded by Ministerio de Ciencia e Innovación—Agencia Estatal de Investigación (AEI) (PID2021-123511OB-C31-MCIN/AEI/10.13039/501100011033/FEDER, UE) and Ministerio de Ciencia, Innovación y Universidades—Agencia Estatal de Investigación (AEI) (RED2018-102431-T).
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Thermo-economic optimization of a multi-source (air/sun/ground) residential heat pump with a water/PCM thermal storage

  • Pelella, Francesco
  • Zsembinszki, Gabriel
  • Viscito, Luca
  • Mauro, Alfonso William
  • Cabeza, Luisa F.
The main target of this paper is to numerically study a multi-source (air/sun/ground) heat pump with the implementation of a thermal energy storage, using either water or PCM, for residential space heating. The system was modelled considering several sub-models for each of the components (compressor, solar panels, storage tank, heat exchangers etc.). A control strategy has been established to decide which operating mode of the system provides the highest coefficient of performance (COP). A multi-objective optimization through genetic algorithm of several decisional variables of the system was carried out, in different configurations and climate conditions, by considering different scenarios in terms of total investment and energy consumption costs, to optimize seasonal performances and investment cost of the entire system. Results show that solar thermal and solar photovoltaic collectors coupled with water storage tank give higher seasonal energy performance, especially in warmer climates, whereas the exploitation of the ground source can be more advantageous for colder climates. From the optimization analysis, it results that optimal non-dominated solutions characterized by a SCOP increase between 50% and 250% are characterized by higher investment costs between 215% and 730%, depending on the climate conditions. None of the solutions employing a PCM storage tank results economically feasible, due to a slight effect on system performance, and a much higher effect on investment costs. Finally, several cost scenarios in terms of incentives on investment costs and increased energy prices were analysed, for which the employment of scenarios with higher capital investment can be more advantageous in terms of lower total costs., This work was partially funded by Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (PID2021-123511OB-C31 - MCIN/AEI/10.13039/501100011033/FEDER, UE and RED2018-102431-T - MCIU/AEI). This work is partially supported by ICREA under the ICREA Academia programme. The authors form University of Lleida would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Experimental steady-state and transient thermal performance of materials for thermal energy storage in building applications: From powder SS-PCMs to SS-PCM-based acrylic plaster

  • Cárdenas-Ramírez, Carolina
  • Gómez, Maryory A.
  • Jaramillo, Franklin
  • Cardona, Andrés F.
  • Fernández, Ángel G.
  • Cabeza, Luisa F.
Thermal performance of SS-PCM composites, simulating building envelope conditions, is difficult to asset with traditional laboratory equipment. However, in this work, the evaluation of three SS-PCM based on eutectic fatty acid mixtures of capric-myristic (CA/MA), lauric-myristic (LA/MA) and palmitic-stearic (PA/SA) was accomplished by a testing setup that allows to test samples in steady-state and dynamic conditions. Moreover, a SS-PCM-based acrylic plaster was evaluated as a fiber cement siding finish. The obtained values were used to calculate the thermal transmittance (U-value), heat storage capacity, and thermal inertia parameters under a simulated diurnal cycle. Results showed that the use of phase change materials in powder form increase thermal lag between 148% and 180% and present a decrement factor <0.2. Furthermore, building envelopes as fiber cement siding with a SS-PCM-based acrylic plaster coating decreased 20.8% the indoor temperature, increase 67.26% the thermal lag and decrease 9% of the decrement factor., The authors are pleased to acknowledge the financial assistance of the “Ministerio de Ciencia, Tecnología e Innovación-MINCIENCIAS” through the PhD grant 758-2016-Contract 036–2016, Universidad de Antioquia and Sumicol S.A.S. The work is partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31—MCIU/AEI/FEDER, UE) and by the Ministerio de Ciencia, Innovación y Universidades—Agencia Estatal de Investigación (AEI) (RED2018-102431-T). This work is partially supported by ICREA under the ICREA Academia programme. Dr. Cabeza would like to thank the Catalan Government for the quality accreditation given to her research group GREiA (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Circular economy in the building and construction sector: A scientific evolution analysis

  • Norouzi, Masoud
  • Chàfer, Marta
  • Cabeza, Luisa F.
  • Jiménez, Laureano
  • Boer, Dieter
The building industry is responsible for considerable environmental impacts due to its consumption of resources and energy, and the production of wastes. Circular Economy (CE), a new paradigm can significantly improve the sustainability of this sector. This paper performs a quantitative scientific evolution analysis of the application of CE in the building sector to detect new trends and highlight the evolvement of this research topic. Around 7000 documents published 2005 to 2020 at Web of Science and Scopus were collected and analyzed. The bibliometric indicators, network citation, and multivariate statistical analysis were obtained using Bibliometrix R-package and VOSviewer. The co-occurrence analysis showed five keyword-clusters, in which the three main ones are: (i) energy and energy efficiency in buildings; (ii) recycling, waste management and alternative construction materials; (iii) sustainable development. The analysis showed that researchers pay close attention to 'sustainability', 'energy efficiency', 'life cycle assessment', 'renewable energy', and 'recycling' in the past five years. This paper highlights that (i) the development and use of alternative construction materials; (ii) the development of circular business models; (iii) smart cities, Industry 4.0 and their relations with CE, are the current research hotspots that may be considered as potential future research topics., The authors would like to acknowledge financial support from the Spanish Ministry of Economy and Competitiveness RTI2018-093849-B-C33 (MCIU/AEI/FEDER, UE), RTI2018-093849-B-C31 (MCIU/AEI/FEDER, UE) and CTQ2016-77968-C3-1-P (MINECO/FEDER) and thank the Catalan Government (2017-SGR-1409, 2017-SGR-1537, and 2019 FI-B-00762). This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Thermal reliability of organic-organic phase change materials and their shape-stabilized composites

  • Cárdenas-Ramírez, Carolina
  • Gómez, Maryory A.
  • Jaramillo, Franklin
  • Fernández, Ángel G.
  • Cabeza, Luisa F.
Thermal reliability is one of the main concerns when using shape-stabilized phase change materials (SS-PCMs) composites in latent heat thermal energy storage (TES) systems operating in moderate to low temperature range. Thus, this paper presents a study of the thermal stability, chemical stability, and thermal properties of three binary eutectic mixtures of fatty acids: capric/myristic acid (CA/MA), lauric/myristic acid (LA/MA), and palmitic/stearic acid (PA/SA); as well of three SS-PCMs produced with a natural porous support: SS-CA/MA, SS-LA/MA and SS-PA/SA. The eutectics and the SS-PCMs were exposed to several heating/cooling cycles and then infrared spectroscopy was carried out to determine chemical changes. Moreover, phase change temperature, latent heat of fusion, and latent heat of solidification were measured by differential scanning calorimetry. The eutectics and composites were proven to present good thermal reliability over 100 cycles for CA/MA and SS-CA/MA, and up to 10000 cycles for LA/MA, PA/SA, SS-LA/MA and SS-PA/SA. The melting temperatures for the composites were between 19.5◦C and 53.2◦C, and enthalpies between 38 J/g and 49 J/g, with maximum deviation after thermal cycling below 2.03◦C and 11.45 J/g. These results confirm that these materials have significant potential to be used for thermal energy storage applications that required good thermal reliability., The authors are pleased to acknowledge the financial assistance of the “Ministerio de Ciencia, Tecnología e Innovación-MINCIENCIAS” through the PhD grant 758-2016-Contract 036-2016, Universidad de Antioquia and Sumicol S.A.S. This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE) and by the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). The authors at the University of Lleida would like to thank the Catalan Government for the quality accreditation given to their research group GREiA (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Thermal energy storage with phase change materials in solar power plants. Economic analysis

  • Prieto, Cristina
  • Cabeza, Luisa F.
Thermal energy storage (TES) increases concentrating solar power (CSP) plant capacity factors, but more important, improves dispatchability; therefore, reducing the capital cost of TES systems is very important to reduce cost of energy and serve as an enabler for commercial solar power plants. After presenting the concept of a novel cascade PCM configuration of CSP and demonstrating it energy efficiency, it is needed to develop a thoughtful economic evaluation of the concept. The goal of this paper was to investigate this system through annual modelling, engineering procurement company price quotes, and levelized cost metric comparison with a baseline case, the commercial two-tank molten salt storage system. Simulation results show that this new PCM concept decrease levelized costs of storage. The baseline of using shell and tube heat exchangers for PCM storage offers a reduction in capital and levelized cost, but this paper also shows that there are further cost reduction possibilities, as shown in the scenarios presented here, such as thermal conductivity enhancement, encapsulation of the PCM, or modification of the material to improve its thermal properties. Therefore, although the basic shell and tube PCM system has been shown to offer a cost savings, the 1.8% reduction in LCOE may not be worth the risk of further development. The shell and tube system should be a jumping off point to more appropriate technologies. The variants studied are likely to yield cost reductions in cost performance quotient (CPQ) as high at 80% and in LCOE as high as 10%, representing an unprecedented and valuable avenue of CSP plant cost reduction., The research leading to these results has received funding from CDTI in the project Innterconecta Thesto (ITC-20111050). We would like to thank Abengoa Thermal Storage Team for their comments and suggestions. This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE) and by the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). Dr. Cabeza would like to thank the Catalan Government for the quality accreditation given to her research group GREiA (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Thermal performance assessment and control optimization of a solar-driven seasonal sorption storage system for residential application

  • Crespo, Alicia
  • Fernàndez Camon, César
  • Vérez, David
  • Tarragona Roig, Joan
  • Borri, Emiliano
  • Frazzica, Andrea
  • Cabeza, Luisa F.
  • Gracia Cuesta, Alvaro de
The present paper analyzed the thermal performance and control optimization of a solar system based on seasonal sorption storage for domestic applications. The system control, which could choose between 41 operational modes, was optimized based on operational costs and maximization of sorption system use. The system was composed by 17.5 m2 of evacuated tube collectors, 3.6 m3 of composite sorbents based on lithium chloride and a stratified water tank. High efficiency of a sorption storage system was obtained when continuous charges or discharges occur, which, in this study, depended on weather conditions (ambient temperature and solar irradiation). The operational economic benefits were maximized using a sorption system with 9% less capacity and, therefore, less storage volume. The sorption thermal energy storage system obtained energy densities of 90 and 106 kWh/m. The whole system could supply 35% of the total thermal demand of a single family house in Nuremberg. The study concluded that the control optimization of a seasonal sorption system is a key factor to make the technology competitive, define its optimal size and, therefore, maximize its energy density in further designs., This project was funded by the European Union’s Horizon 2020 Research and Innovation Programme under grant agreement No. 764025 (SWS-HEATING). This work was partially funded by the Ministerio de Ciencia, Innovación Universidades de España, Spain (RTI2018-093849-B-C31–MCIU/AEI/FEDER, UE) and by the Ministerio de Ciencia, Innovación Universidades–Agencia Estatal de Investigación (AEI) (RED2018-102431-T). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme. Alicia Crespo would also like to acknowledge the financial support of the FI-SDUR grant from the AGAUR of the Generalitat de Catalunya and Secretaria d’Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya.
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Life cycle assessment (LCA) of an innovative solar-biomass energy system in continental climate

  • Borri, Emiliano
  • Palomba, Valeria
  • Charalampidis, Antonios
  • Frazzica, Andrea
  • Karellas, Sotirios
  • Cabeza, Luisa F.
Hybrid energy systems applied to buildings are an effective solution to increase the share of energy produced by renewable sources to satisfy both thermal end electrical energy demand. In this study, the environmental impact of an innovative energy system based on the use of solar energy and biomass for heating, cooling, DHW, and electricity production was evaluated through life-cycle assessment (LCA) and compared to a reference standard system to be used in a multi-family house building located in a continental climate., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 814945 (SolBio-Rev). This work was partially funded by Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE) and by the Ministerio de Ciencia, Innovación y Universidades-Agencia Estatal de Investigación (AEI) (RED2018-102431- T- AEI). This work is partially supported by ICREA under the ICREA Academia programme. The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

New Concept for High Temperature Thermal Energy Storage Using a Concrete Tank

  • Cabeza, Luisa F.
  • Vérez, David
  • Zsembinszki, Gabriel
  • Borri, Emiliano
  • Prieto, Cristina
The use of concrete is showing great potential as thermal energy storage material for concentrating solar power plants (CSP) due to its versatility, relatively low cost, and the possibility to reach a high operating temperature, above 500ºC thus increasing the plant efficiency. However, actual configurations based on concrete show different drawbacks including difficulties during the manufacturing on-site, different thermal expansion coefficients between concrete and pipes, and poor thermal conductivity of concrete. In order to address those challenges, this study proposes a new TES concrete tank concept based on three main pillars: modularity, improved concrete formulation, and direct contact concept. A preliminary assessment of the thermal performances of the new concept was analyzed through simulations showing the temperature distribution of the modules., This work is part of PCI2020-120695-2 projects funded by Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (MCIN/AEI/10.13039/501100011033) and by the European Union “NextGenerationEU”/PRTR”. This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE) and by the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T- MCIU/AEI). The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREiA (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Characterisation of the COMFORTBOARD gypsum board for thermal energy storage in buildings

  • Marín, Paula E.
  • Ushak, Svetlana
  • Gracia Cuesta, Alvaro de
  • Cabeza, Luisa F.
Currently, the construction sector contributes considerably to the total energy consumption and greenhouse gas emissions into the atmosphere. Thermal energy storage (TES) systems are alternatives to increase the thermal inertia of buildings, aiming to use less energy, improve thermal comfort and reduce temperature fluctuations of interior spaces. One of the possible applications in buildings is to increase their thermal mass by impregnating phase change materials (PCM) in porous construction materials, e.g., gypsum boards. In this investigation, a commercial gypsum board impregnated with PCM (Knauf Comfortboard - BASF) was investigated by carrying out a structural and thermal characterisation. The thermal response obtained agrees with the product's technical data sheet provided by the supplier. The results of the thermal characterisation show that the inclusion of PCM in the gypsum board decreased the U-value by 2 % compared to the control sample (no PCM), increased the heat storage capacity by around 45 %, improved the thermal dynamic characteristics of the material by decreasing the thermal stability coefficient from 0.92 to 0.76 and increasing the thermal lag from 0.27 to 0.49 h. Our results sustain the potential application of commercial gypsum boards with PCM under environmental conditions across a wide range of daily temperature fluctuations (e.g., The North of Chile)., Paula E. Marín, thanks fellowship CONICYT-PCHA/Doctorado Nacional/2015, Folio N° 21151359 and Doctoral program in Mineral Process Engineering (Doctorado en Ingeniería de Procesos Minerales), Universidad de Antofagasta. Authors acknowledge to ANID/FONDAP N° 15110019, PUENTE Nº 1522A0006 and CONICYT/PCI/REDES N° 170131 projects. This study was partially funded by Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (PID2021-123511OB-C31 - MCIN/AEI/10.13039/501100011033/FEDER, UE and RED2018-102431-T - MCIU/AEI). This work is partially supported by ICREA under the ICREA Academia programme. Dr. Cabeza would like to thank the Catalan Government for the quality accreditation given to her research group (2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Characterization of Supplementary Cementitious Materials and Fibers to be Implemented in High Temperature Concretes for Thermal Energy Storage (TES) Application

  • Boquera, Laura
  • Pons, David
  • Fernández Renna, Ana Inés
  • Cabeza, Luisa F.
Six supplementary cementitious materials (SCMs) were identified to be incorporated in concrete exposed to high-temperature cycling conditions within the thermal energy storage literature. The selected SCMs are bauxite, chamotte, ground granulated blast furnace slag, iron silicate, silica fume, and steel slag. A microstructural characterization was carried out through an optical microscope, X-ray diffraction analysis, and FT-IR. Also, a pozzolanic test was performed to study the reaction of SCMs silico-aluminous components. The formation of calcium silica hydrate was observed in all SCMs pozzolanic test. Steel slag, iron silicate, and ground granulated blast furnace slag required further milling to enhance cement reaction. Moreover, the tensile strength of three fibers (polypropylene, steel, and glass fibers) was tested after exposure to an alkalinity environment at ambient temperature during one and three months. Results show an alkaline environment entails a tensile strength decrease in polypropylene and steel fibers, leading to corrosion in the later ones., Funding This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31—MCIU/AEI/FEDER, UE and RTI2018-093849-B-C32—MCIU/AEI/FEDER) and by the Ministerio de Ciencia, Innovación y Universidades—Agencia Estatal de Investigación (AEI) (RED2018-102431-T). This work is partially supported by ICREA under the ICREA Academia programme. This study was partially funded by AEI—Spanish Ministry of Science, Innovation and Universities (PCI2020-120695-2/AEI/10.13039/501100011033 and PCI2020-120682-2/AEI/10.13039/501100011033 through PCI call). Acknowledgments The authors would like to thank the Catalan Government for the quality accreditation given to their research groups (2017 SGR 1537 and 2017 SGR 118). GREiA and DIOPMA are certified agents TECNIO in the category of technology developers from the Government of Catalonia. The authors also thank the companies that provided the material to make possible this experimental research: Gestión Medioambiental de Neumáticos S.L., Arciresa, EDERSA—Masaveu Industria and Promsa—Megasa.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Analysis of thermal energy storage tanks and PV panels combinations in different buildings controlled through model predictive control

  • Tarragona Roig, Joan
  • Pisello, Anna Laura
  • Fernàndez Camon, César
  • Cabeza, Luisa F.
  • Payá, Jorge
  • Marchante-Avellaneda, Javier
  • Gracia Cuesta, Alvaro de
The present study analyses the performance of a heating system controlled by a model predictive control strategy, where the impact of different combinations of thermal energy storage tank volumes and installed PV power capacities are analysed. The novelty of the paper lies in studying both economic and energy impacts of each equipment combination in different locations, buildings, and indoor occupancy schedules. The payback period, the reduction of the electricity grid consumption, and the behaviour of the coefficient of performance of the heat pump are studied in detail for all cases. Results point out that from an economic point of view, to invest in a thermal energy storage tank provides shorter payback periods in comparison to scenarios with PV panels, due to the high price of the solar elements. However, the energy performance analysis highlighted that the use of PV panels contributes to achieve up to 34%, 54%, and 90% of reduction of the electricity grid consumption in Helsinki, Strasbourg, and Athens, respectively. Finally, it is worth noting that the increase of the thermal energy storage volume improves the coefficient of performance of the heat pump., This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE) and the Agencia Estatal de Investigación (AEI) (RED2018-102431-T). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is a certified TECNIO agent in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme. A.L. Pisello's acknowledgements are due to the National Ministry of Research for supporting NEXT.COM project under the framework of PRIN 2017 (cod. 20172FSCH4_002) and the IEA EBC Annex 79 “Occupant-centric building design and operation” for inspiring human-centric research.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Thermal energy storage co-benefits in building applications transferred from a renewable energy perspective

  • Vérez, David
  • Borri, Emiliano
  • Zsembinszki, Gabriel
  • Cabeza, Luisa F.
Although one of the main aims of using renewable energy sources in building applications is to reduce the environmental impact caused by the high global energy demand of buildings, it can also produce other positive effects, known as co-benefits. Thermal energy storage technologies are often used in building applications, either integrated into the renewable system or independently, for energy savings or energy efficiency reasons. This paper demonstrates that it is possible to identify the co-benefits of the use of thermal energy storage in buildings by cross-sectorizing the renewable energy and thermal energy storage sectors. To this end, this article first reviews the literature on the co-benefits of renewable energy for building applications, followed by an evaluation on how these co-benefits can be attributed to thermal energy storage in buildings. As a result of a keywords analysis, the main co-benefits of thermal energy storage were identified related to environmental, health, economic, cost, and policies aspects., This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE) and by the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREiA (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Repositori Obert UdL
Publication Capítulo o parte de un libro (BookPart)

Buildings (< 50 kWh/day). Integrated Batteries with Phase Change Materials (PCM) for Peak Shaving and Load Management: The HYBUILD Example

  • Frazzica, Andrea
  • Valeria , Palomba
  • Aloisio, Davide
  • Zsembinszki, Gabriel
  • Ferraro, Marco
  • Sergi, Francesco
  • Cabeza, Luisa F.
The continuous increasing of renewable-based energy systems, both for heating and power generation, at building level requires the development of innova-tive compact hybrid energy storages. These technologies are able to support the flex-ible operation of such complex systems, increasing the exploitability of renewables and the overall system efficiency. In this chapter, a brief overview of different storage technologies, such as thermal, electric and hybrid, at building level is provided, mostly focusing on their integration with onsite renewable generation and smart grids. The analysis highlights the relevant role of flexible energy storages at building level as well as the lack of innovative components able to provide multiple services (e.g. heating, cooling, domestic hot water and power) to buildings. In such a back-ground, the experience carried out in the framework of the EU-funded HYBUILD project is described. The overall concept, integrating electric batteries, latent, and thermochemical storages, with highly efficient reversible heat pumps is described, showing the different options developed for continental and mediterranean climates. The fully integrated Mediterranean system, validated both at lab-scale and in a demo building, demonstrated the ability of increasing the share of renewables in buildings, maximizing the self-consumption and increasing the overall energy efficiency of the system., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 768824 (HYBUILD). This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31–MCIU/AEI/FEDER, UE) and the Ministerio de Ciencia e Inno-vación (PID2021-123511OB-C31—MCIN/AEI/https://doi.org/10.13039/501100011033/FEDER, UE) and by the Ministerio de Ciencia, Innovación y Universidades–Agencia Estatal de Investi-gación (AEI) (RED2018-102431-T and RED2022-134219-T). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537 and 2022 SGR 01615). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Life Cycle Assessment (LCA) of an Innovative Compact Hybrid Electrical‐Thermal Storage System for Residential Buildings in Mediterranean Climate

  • Zsembinszki, Gabriel
  • Llantoy, Noelia
  • Palomba, Valeria
  • Frazzica, Andrea
  • Dallapiccola, Mattia
  • Trentin, Federico
  • Cabeza, Luisa F.
The buildings sector is one of the least sustainable activities in the world, accounting for around 40% of the total global energy demand. With the aim to reduce the environmental impact of this sector, the use of renewable energy sources coupled with energy storage systems in buildings has been investigated in recent years. Innovative solutions for cooling, heating, and domestic hot water in buildings can contribute to the buildings' decarbonization by achieving a reduction of building electrical consumption needed to keep comfortable conditions. However, the environmental impact of a new system is not only related to its electrical consumption from the grid, but also to the environmental load produced in the manufacturing and disposal stages of system components. This study investigates the environmental impact of an innovative system proposed for residential buildings in Mediterranean climate through a life cycle assessment. The results show that, due to the complexity of the system, the manufacturing and disposal stages have a high environmental impact, which is not compensated by the reduction of the impact during the operational stage. A parametric study was also performed to investigate the effect of the design of the storage system on the overall system impact., This project received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 768824 (HYBUILD). This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31—MCIU/AEI/FEDER, UE) and by the Ministerio de Ciencia, Innovación y Universidades—Agencia Estatal de Investigación (AEI) (RED2018-102431-T). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Experimental comparison of small-scale and full-scale latent storage for integration in efficient heat pumps

  • Palomba, Valeria
  • Mselle, Boniface Dominick
  • Vérez, David
  • Borri, Emiliano
  • Varvagiannis, Efstratios
  • Monokrousou, Evropi
  • Nitsch, Birgo
  • Strehlow, Andreas
  • Barmparitsas, Nikolaos
  • Leontaritis, Aris
  • Bonanno, Angelo
  • Dino, Giuseppe E.
  • Zsembinszki, Gabriel
  • Karellas, Sotirios
  • Frazzica, Andrea
  • Cabeza, Luisa F.
This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 768824 (HYBUILD). This work is partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE) and the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018- 102431-T). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme. Boniface Dominick Mselle would like to thank Programa Santander Predoc UdL for his research fellowship.
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Avaluació de la configuració de diferents plantes de concentració solar (CSP) mitjançant eines d’avaluació del cicle de vida (ACV)

  • Gasa, Gemma
Totes les tecnologies de concentració solar (CSP) utilitzen una configuració per concentrar l’energia de la llum solar en un receptor i convertir-la en calor. L'energia tèrmica es pot utilitzar per crear vapor que condueixi una turbina per produir energia elèctrica o es pot utilitzar com a procés industrial de calor., Aquest treball està parcialment finançat pel el Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (AEI) (PID2021-123511OB-C31 - MCIN/AEI/10.13039/501100011033/FEDER, UE) i pel Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). Els autors agraeixen al Govern de Catalunya l‟acreditació de qualitat concedida al grup de recerca GREiA (2017 SGR 1537). GREiA és un agent certificat TECNIO dins la categoria de desenvolupadors tecnològics del Govern de Catalunya. Aquest treball està parcialment recolzat per ICREA dins del programa ICREA Acadèmia. El projecte NitRecerCat (GA 101061189) està cofinançat pel programa de recerca i innovació Horitzó Europa de la Unió Europea.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Experimental Study on Two PCM Macro-Encapsulation Designs in a Thermal Energy Storage Tank

  • Vérez, David
  • Borri, Emiliano
  • Crespo, Alicia
  • Mselle, Boniface Dominick
  • Gracia Cuesta, Alvaro de
  • Zsembinszki, Gabriel
  • Cabeza, Luisa F.
The use of latent heat thermal energy storage is an effective way to increase the efficiency of energy systems due to its high energy density compared with sensible heat storage systems. The design of the storage material encapsulation is one of the key parameters that critically affect the heat transfer in charging/discharging of the storage system. To fill the gap found in the literature, this paper experimentally investigates the effect of the macro-encapsulation design on the performance of a lab-scale thermal energy storage tank. Two rectangular slabs with the same length and width but different thickness (35 mm and 17 mm) filled with commercial phase change material were used. The results show that using thinner slabs achieved a higher power, leading to a reduction in the charging and discharging time of 14% and 30%, respectively, compared with the thicker slabs. Moreover, the variation of the heat transfer fluid flow rate has a deeper impact on the temperature distribution and the energy charged/released when thicker slabs were used. The macro-encapsulation design did not have a significant impact on the discharging efficiency of the tank, which was around 85% for the operating thresholds considered in this study., This project has received funding from the European Union’s Horizon 2020 research and innovation program under grant agreement No. 764025 (SWS-HEATING). This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31—MCIU/AEI/FEDER, UE) and by the Ministerio de Ciencia, Innovación y Universidades—Agencia Estatal de Investigación (AEI) (RED2018-102431-T). This work is partially supported by ICREA under the ICREA Academia program.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Recent Trends on Liquid Air Energy Storage: A Bibliometric Analysis

  • Borri, Emiliano
  • Tafone, Alessio
  • Zsembinszki, Gabriel
  • Comodi, Gabriele
  • Romagnoli, Alessandro
  • Cabeza, Luisa F.
The increasing penetration of renewable energy has led electrical energy storage systems to have a key role in balancing and increasing the e ciency of the grid. Liquid air energy storage (LAES) is a promising technology, mainly proposed for large scale applications, which uses cryogen (liquid air) as energy vector. Compared to other similar large-scale technologies such as compressed air energy storage or pumped hydroelectric energy storage, the use of liquid air as a storage medium allows a high energy density to be reached and overcomes the problem related to geological constraints. Furthermore, when integrated with high-grade waste cold/waste heat resources such as the liquefied natural gas regasification process and hot combustion gases discharged to the atmosphere, LAES has the capacity to significantly increase the round-trip efficiency. Although the first document in the literature on the topic of LAES appeared in 1974, this technology has gained the attention of many researchers around the world only in recent years, leading to a rapid increase in a scientific production and the realization of two system prototype located in the United Kingdom (UK). This study aims to report the current status of the scientific progress through a bibliometric analysis, defining the hotspots and research trends of LAES technology. The results can be used by researchers and manufacturers involved in this entering technology to understand the state of art, the trend of scientific production, the current networks of worldwide institutions, and the authors connected through the LAES. Our conclusions report useful advice for the future research, highlighting the research trend and the current gaps., This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31—MCIU/AEI/FEDER, UE). This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). The authors at the University of Lleida would like to thank the Catalan Government for the quality accreditation given to their research group GREiA (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work was partially supported by ICREA under the ICREA Academia program.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

A new methodological approach for the evaluation of scaling up a latent storage module for integration in heat pumps

  • Zsembinszki, Gabriel
  • Mselle, Boniface Dominick
  • Vérez, David
  • Borri, Emiliano
  • Strehlow, Andreas
  • Nitsch, Birgo
  • Frazzica, Andrea
  • Palomba, Valeria
  • Cabeza, Luisa F.
A clear gap was identified in the literature regarding the in-depth evaluation of scaling up thermal energy storage components. To cover such a gap, a new methodological approach was developed and applied to a novel latent thermal energy storage module. The purpose of this paper is to identify some key aspects to be considered when scaling up the module from lab-scale to full-scale using different performance indicators calculated in both charge and discharge. Different normalization methods were applied to allow an appropriate comparison of the results at both scales. As a result of the scaling up, the theoretical energy storage capacity increases by 52% and 145%, the average charging power increases by 21% and 94%, while the average discharging power decreases by 16% but increases by 36% when mass and volume normalization methods are used, respectively. When normalization by the surface area of heat transfer is used, all of the above performance indicators decrease, especially the average discharging power, which decreases by 49%. Moreover, energy performance in charge and discharge decreases by 17% and 15%, respectively. However, efficiencies related to charging, discharging, and round-trip processes are practically not affected by the scaling up., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No. 768824 (HYBUILD). This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31—MCIU/AEI/FEDER, UE) and by the Ministerio de Ciencia, Innovación y Universidades—Agencia Estatal de Investigación (AEI) (RED2018-102431-T). This work is partially supported by ICREA under the ICREA Academia programme.