Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 36
Encontrada(s) 1 página(s)

Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Development of a new concrete for high-temperature thermal energy storage

  • Cabeza, Luisa F.
  • Boquera, Laura
  • Castro Chicot, José Ramón
  • Pisello, Anna Laura
Vision: Being a reference group of engineering at an international level, always linked to the University of Lleida. Mission: To propose solutions to the industry in the fields of sustainability, energy engineering and control, through research, technology transfer and training. Objectives: To improve existing knowledge through research and innovation ; To help increase the competitiveness of companies through collaborations, whether for the design of new products or as a technology consultancy., This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE), Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T - MCIU/AEI), Agencia Estatal de Investigación (AEI) - Ministerio de Ciencia, Innovación y Universidades (PCI2020-120695- 2/AEI/10.13039/501100011033), and Secretaria de Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya and is co-financed by the European Union through the European Regional Development Fund (FEDER) (2019PROD00101). Funding has also been received from European Union’s Horizon 2020 research and innovation programs under the project CSPplus (Cofund ERA-NET Action, N° 838311). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537) and the ICREA Catalan institution for awarding the ICREA Academy, for the second consecutive time. GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Life cycle assessment (LCA) of concentrating solar power (CSP) plant in tower configuration with and without thermal energy storage (TES)

  • Gasa, Gemma
  • López-Román, Antón
  • Cabeza, Luisa F.
  • Prieto, Cristina
INTRODUCTION: The main objective of the present study is to compare the 30-year life cycle assessment of two concentrating solar power systems with tower configuration, one without thermal energy storage and the other with thermal energy storage, in order to assess their potential impact on the environment. To achieve this aim, common reference characteristics have been defined in order to allow the optimal comparison. The reference power considered for both technologies has been 110 MW and the "power cycle" (turbine, alternator and generator) and the "cooling system" are the same in both configuration. In general terms, the significant differences between both configurations are focused on the area of the solar field, and with it the number of heliostats, and on the storage of thermal energy by inorganic salts. Although it is true that concentrating solar power plant (CSP) in tower without thermal energy storage is not a current commercial configuration, it is very interesting to be able to compare the environmental impacts of both configurations when thermal energy storage is added to the solar plant. In addition, the study ends by assessing whether the environmental impact that is generated by adding thermal energy storage compensates with the improvement of its manageability, its dispatchability and its contribution to decarbonisation. METHOD: Life cycle assessment (LCA) is a methodology that allows evaluating the environmental loads associated with a product, process or activity, identifying and quantifying the energy, the materials consumed and the waste released into the environment throughout the entire life cycle. The LCA included in this study is carried according to ISO 14040 and 14044. Thus, this LCA is based on the impact assessment method ReCiPe in impact points and GWP in kgCO2eq and the database used is Ecoivent 3.6, which has positioned itself as a world leader in creating more transparent life cycle impact databases. Moreover, this work encompasses three distinct phases of evaluation: manufacturing, operational, and end of life. RESULTS AND CONCLUSIONS: At the time of submitting this abstract, the study is on its way., This work was supported under the umbrella of CSP-ERA-Net 1st Cofund Joint Call by AEI - Spanish Ministry of Science, Innovation and Universities, TÜBITAK - Scientific and Technological Research Council of Turkey, and CSO - Israeli Ministry of Energy. CSP-ERA-Net is supported by the European Commission within the EU Framework Programme for Research and Innovation HORIZON 2020 (Cofund ERA-NET Action, N° 838311) and it was partially funded by Agencia Estatal de Investigación (AEI) - Ministerio de Ciencia, Innovación y Universidades (PCI2020-120695- 2/AEI/10.13039/501100011033), Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE), and Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018- 102431-T). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

The role of buildings in climate change mitigation

  • Cabeza, Luisa F.
This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31-MCIU/AEI/FEDER,UE), Ministerio de Ciencia, Innovación y Universidades-Agencia Estatal de Investigación(AEI)(RED2018-102431-T-MCIU/AEI), Agencia Estatal de Investigación(AEI)-Ministerio de Ciencia, Innovación y Universidades (PCI2020-120695-2/AEI/10.13039/501100011033), and Secretaria de Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya and is co-financed by the European Union through the European Regional Development Fund(FEDER)(2019PROD00101). Funding has also be enreceived from European Union’s Horizon2020 research and innovation programs under projects Innova MicroSOLAR (723596), HYBUILD (768824), SWS-HEATING (764025), SolBio-Rev (814945), CSPplus (Cofund ERA-NET Action, N°838311), and CO-COOL (101007976). The authors would like to thank the Catalan Government for the quality accreditation given to the irresearch group (2017SGR1537) and the ICREA Catalan institution for awarding the ICREA Academy, for the second consecutive time. GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

A technical and economic comparison between concrete and latent thermal energy storage for concentrated solar power applications

  • Prieto, Cristina
  • Borri, Emiliano
  • Pavón Moreno, M. Carmen
  • Zsembinszki, Gabriel
  • Cabeza, Luisa F.
Thermal energy storage (TES) plays a key role in concentrating solar power (CSP) plants by enhancing dispatchability and improving overall system efficiency. This study presents a comparative techno-economic analysis of three TES configurations integrated into CSP plants: (i) the conventional two-tank molten salt system, (ii) a phase change material (PCM)-based system with a cascade arrangement, and (iii) a concrete-based system. While technical performance simulations indicate similar annual energy production across all cases, significant differences emerge in economic viability. The PCM TES system demonstrates the lowest levelized cost of electricity (LCoE) at $14.35/kWh, leveraging its high energy density and reduced material requirements, despite lower efficiency (93 % compared to 99 % in molten salt). Conversely, the concrete TES system, while capable of extended discharge at partial loads, incurs higher parasitic losses and investment costs, resulting in a higher LCoE ($16.16/kWh). The cost analysis further highlights the cost-performance quotient (CPQ) as a valuable metric for assessing TES competitiveness, with PCM exhibiting the most favorable CPQ of $1.04/kWh. These findings underscore the necessity of integrating economic assessments into TES selection for CSP plants. Moreover, the study identifies opportunities for cost reduction in concrete TES through optimized modular designs and improved material formulations. This work provides valuable insights for policymakers, engineers, and industry stakeholders aiming to enhance the financial feasibility of next-generation CSP storage solutions., This study receives funding from the Ministerio de Ciencia e Innovación – Agencia Estatal de Investigación (MCIN/AEI/10.13039/501100011033) through the PCI2020-120695-2 project and the European Union “NextGenerationEU”/PRTR“. CSP-ERA.NET is supported by the European Commission within the EU Framework Programme for Research and Innovation Horizon 2020 (Cofund ERA-NET Action, N° 838311). This work was partially funded by the Ministerio de Ciencia e Innovación de España TED2021-132216A-I00 funded by MCIN/AEI/10.13039/501100011033 and the European Union by NextGenerationEU/PRTR. This work was partially funded by the Ministerio de Ciencia e Innovación – Agencia Estatal de Investigación (AEI) (PID2021-123511OB-C31 – MCIN/AEI/10.13039/501100011033/FEDER, UE) and (RED2022-134219-T). This work is partially supported by ICREA under the ICREA Academia programme. The authors from University of Lleida would like to thank the Departament de Recerca i Universitats of the Catalan Government for the quality accreditation given to their research group (2021 SGR 01615). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Advancing sensible heat storage: A novel transient heat transfer model for concrete-based TES modules for CSP applications

  • Tagle-Salazar, Pablo D.
  • Cabeza, Luisa F.
  • Prieto, Cristina
Concentrating solar power (CSP) plays a crucial role in renewable energy systems, offering high-temperature heat for electricity generation and industrial processes while supporting the transition to sustainable energy. Thermal energy storage (TES) improves the reliability and dispatchability of CSP systems. Among the sensible heat storage options, concrete emerges as a cost-effective and eco-friendly alternative that warrants further investigation. This study introduces a comprehensive mathematical model for simulating the transient thermal behaviour of concrete-based TES modules. The model accommodates diverse geometries, supports a wide range of heat transfer fluids (HTFs) in all flow regimes, and accounts for heat losses to the environment, factors that are often overlooked in prior research. The mathematical framework was incorporated into a software platform called OpenModelica and will later be included in a tool developed by the authors to evaluate the performance of CSP plants. Before this integration takes place, the model undergoes validation, which is the primary focus of this study. The model was validated through two case studies, one theoretical and the other experimental, each involving different operational conditions, geometries, HTFs, and materials. The theoretical case confirmed that the model could capture the key physical phenomena governing transient heat transfer in the storage module. A comparison between the simulation results and experimental data revealed a strong agreement in temperature, heat flow, and total energy transmitted, with temperature errors within the IEC 60751 standard and total energy transfer errors ranging from −6.15 % to +5.69 %. These findings highlight the potential of concrete-based TES to enhance the performance of CSP systems, contributing to reliable and sustainable energy solutions., CSP-ERA.NET is supported by the European Commission within the EU Framework Programme for Research and Innovation Horizon 2020 (Cofund ERA-NET Action, N◦ 838311). This study receives funding from the Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (MCIN/AEI/10.13039/501100011033) through the PCI2020-120695-2 project and the European Union “NextGenerationEU"/PRTR”. This work was partially funded by the Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (AEI) (PID2021-123511OB-C31 - MCIN/AEI/ 10.13039/501100011033/FEDER, UE), and by Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (AEI) (RED2024-153629- T). This work is partially supported by ICREA under the ICREA Academia programme. The authors would like to thank the Departament de Recerca i Universitats of the Catalan Government for the quality accreditation given to their research group (2021 SGR 01615). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Social Acceptance of TES

  • Cabeza, Luisa F.
This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE), Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T - MCIU/AEI), Agencia Estatal de Investigación (AEI) - Ministerio de Ciencia, Innovación y Universidades (PCI2020-120695- 2/AEI/10.13039/501100011033), and Secretaria de Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya and is co-financed by the European Union through the European Regional Development Fund (FEDER) (2019PROD00101). Funding has also been received from European Union’s Horizon 2020 research and innovation programs under projects Innova MicroSOLAR (723596), HYBUILD (768824), SWS-HEATING (764025), SolBio-Rev (814945), CSPplus (Cofund ERA-NET Action, N° 838311), and CO-COOL (101007976). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537) and the ICREA Catalan institution for awarding the ICREA Academy, for the second consecutive time. GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Recent trends and future perspectives on the use of phase change materials for thermal energy storage (CIES 2022)

  • Cabeza, Luisa F.
  • Borri, Emiliano
Vision: Being a reference group of engineering at an international level, always linked to the University of Lleida. Mission: To propose solutions to the industry in the fields of sustainability, energy engineering and control, through research, technology transfer and training. Objectives: To improve existing knowledge through research and innovation ; To help increase the competitiveness of companies through collaborations, whether for the design of new products or as a technology consultancy., This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31-MCIU/AEI/FEDER,UE), Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T-MCIU/AEI), Agencia Estatal de Investigación (AEI) - Ministerio de Ciencia, Innovación y Universidades (PCI2020-120695-2/AEI/10.13039/501100011033). Funding has also been received from European Union’s Horizon 2020 research and innovation program sunder projects SWS-HEATING (764025), CO-COOL (101007976), and CSPplus (CofundERA-NETAction, N°838311) The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017SGR1537) and the ICREA Catalan institution for awarding the ICREA Academy, for these condconsecutive time. GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Recent trends and future perspectives on the use of phase change materials for thermal energy storage (EIRES 2022)

  • Cabeza, Luisa F.
  • Borri, Emiliano
Vision: Being a reference group of engineering at an international level, always linked to the University of Lleida. Mission: To propose solutions to the industry in the fields of sustainability, energy engineering and control, through research, technology transfer and training. Objectives: To improve existing knowledge through research and innovation ; To help increase the competitiveness of companies through collaborations, whether for the design of new products or as a technology consultancy, This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31-MCIU/AEI/FEDER,UE), Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T-MCIU/AEI), Agencia Estatal de Investigación (AEI) - Ministerio de Ciencia, Innovación y Universidades (PCI2020-120695-2/AEI/10.13039/501100011033). Funding has also been received from European Union’s Horizon 2020 research and innovation program sunder projects SWS-HEATING (764025), CO-COOL (101007976), and CSPplus (CofundERA-NETAction, N°838311) The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017SGR1537) and the ICREA Catalan institution for awarding the ICREA Academy, for these condconsecutive time. GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Definition of key performance indicators (KPIs) to evaluate innovative storage systems in concentrating solar power (CSP) plants

  • Cabeza, Luisa F.
  • Borri, Emiliano
  • Gasa, Gemma
  • Zsembinszki, Gabriel
  • López-Román, Antón
  • Prieto, Cristina
The increasing penetration of renewable energies into the energy system is leading to significant development and deployment of generation plants based on the use of solar energy. On large scale, concentrating solar power (CSP) plants is the starring technology. In those systems, thermal energy storage (TES) is an essential component that allows both providing dispatchability and increasing power production thus improving the plant efficiency and reducing both its size and cost. Current storage technologies are mainly based on solar salts (molten salts) and saturated steam, their main drawback being their operating temperatures. Therefore, the current challenge is to develop innovative solutions that allow CSP plants to work at higher temperatures to increase their efficiency. In order to allow the comparison of new TES concepts, the definition of proper key performance indicators (KPIs) helps to better identify the best storage solutions. This paper reports a preliminary selection of KPIs suitable for TES systems and their validation against the commercially available two-tanks molten salts storage concept for a 100 MW net capacity CSP tower plant to allow the comparison with innovative solutions. The results of this study can be used as a basis for comparison of TES technologies with the available ones, as well as to set the target for the research and development of future storage solutions., CSPplus is supported under the umbrella of CSP-ERA-Net 1st Cofund Joint Call by AEI - Spanish Ministry of Science, Innovation and Universities, TÜBITAK - Scientific and Technological Research Council of Turkey, and CSO - Israeli Ministry of Energy. CSP-ERA-Net is supported by the European Commission within the EU Framework Programme for Research and Innovation HORIZON 2020 (Cofund ERA-NET Action, N° 838311) and this work was partially funded by Agencia Estatal de Investigación (AEI) - Ministerio de Ciencia, Innovación y Universidades (PCI2020-120695-2/AEI/10.13039/501100011033), and Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE) and by the Ministerio de Ciencia, Innovación y Universidades-Agencia Estatal de Investigación (AEI) (RED2018-102431-T- AEI). This work is partially supported by ICREA under the ICREA Academia programme. The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Recent trends and future perspectives on the use of phase change materials for thermal energy storage (CNIT 2022)

  • Cabeza, Luisa F.
  • Borri, Emiliano
Vision: Being a reference group of engineering at an international level, always linked to the University of Lleida. Mission: To propose solutions to the industry in the fields of sustainability, energy engineering and control, through research, technology transfer and training. Objectives: To improve existing knowledge through research and innovation ; To help increase the competitiveness of companies through collaborations, whether for the design of new products or as a technology consultancy., This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31-MCIU/AEI/FEDER,UE), Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T-MCIU/AEI), Agencia Estatal de Investigación (AEI) - Ministerio de Ciencia, Innovación y Universidades (PCI2020-120695-2/AEI/10.13039/501100011033). Funding has also been received from European Union’s Horizon 2020 research and innovation program sunder projects SWS-HEATING (764025), CO-COOL (101007976), and CSPplus (CofundERA-NETAction, N°838311) The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017SGR1537) and the ICREA Catalan institution for awarding the ICREA Academy, for these condconsecutive time. GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Energia renovable, nova economia i abandonament o reforçament dels petits municipis

  • Cabeza, Luisa F.
  • Zsembinszki, Gabriel
  • Gasa, Gemma
Aquest treball està parcialment finançat pel Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 (FEDER)), Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T), Agencia Estatal de Investigación (AEI) - Ministerio de Ciencia, Innovación y Universidades (PCI2020-120695- 2/AEI/10.13039/501100011033), y Secretaria de Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya i és co-finançat per la Unió Europea a través del Fons Europeu de Desenvolupament Regional (FEDER) (2019PROD00101). També s’ha rebut finançament de l’Horitzo 2020 de l’Unió Europea dins de programes de recerca i innovació amb els projectes Innova MicroSOLAR (723596), HYBUILD (768824), SWSHEATING (764025), SolBio-Rev (814945) i CSPplus (Cofund ERA-NET Action, N° 838311). Agraïr també al Govern Català per l’acreditació de qualitat donada al grup de recerca (2017 SGR 1537) i a la institució catalana ICREA per la concessió de l’ICREA Acadèmia, per segona vegada consecutiva. GREiA és agent certificat TECNIO en la categoria de desenvolupadors de tecnologia de la Generalitat de Catalunya.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

A transient heat losses model for two-tank storage systems with molten salts

  • Tagle-Salazar, Pablo D.
  • Prieto, Cristina
  • López-Román, Antón
  • Cabeza, Luisa F.
Concentrating Solar Power (CSP) is a proven and mature technology for energy supply. In recent years, electricity generation based on this technology has increased worldwide, to a large degree due to its high dispatchability when coupled with an energy storage system. Commercially, most plants store the energy in molten salts in a two-tank configuration. This study focuses on this storage configuration and proposes a mathematical model for the thermal losses in these tanks, both at nominal conditions and during transients. With this model at its core, a computational tool for thermal performance analysis in OpenModelica is developed. This dynamic thermal model includes the estimation of local heat loss due to assembly defects, which are heat flows that cannot be determined by theoretical modelling. The development of a semi-empirical correlation for estimating local heat loss is also presented. Simulation results showed that this local heat loss may represent a share about 40% of the total heat loss in a small-scale tank. A comparison of the characteristics of the model proposed in a previous work is also presented to establish the innovation of the model. Two thermal storage systems with different tank designs and sizes were simulated to compare the results using the present model with data available in the literature. Results show good agreement in transient thermal behaviour of heat flows, temperatures, and cooling rates when compared with data from other authors for the same tank., This project was funded by the European Union's Horizon 2020 Research and Innovation Programme under No. 838311 (CSP plus). The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREiA (2021 SGR 01615). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work was partially funded by the Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (PID2021-123511OB-C31 - MCIN/AEI/10.13039/501100011033/FEDER, EU, TED2021-132216A-I00 and RED2022-134219-T). This work is partially supported by ICREA under the ICREA Academia programme.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Transient performance modelling of solar tower power plants with molten salt thermal energy storage systems

  • Tagle-Salazar, Pablo D.
  • Cabeza, Luisa F.
  • Prieto, Cristina
Concentrating solar power (CSP) has emerged as a dynamic and promising technology, demonstrating a burgeoning market potential for power generation through the utilization of solar thermal resources. Notably, global installed capacity has witnessed a substantial uptick in recent years, indicative that this technology is increasing traction worldwide. To optimize the utilization of CSP systems, particularly during periods of low or absent solar radiation, the integration of thermal energy storage (TES) systems using molten salts has become a prevailing strategy. This research introduces an innovative transient modelling tailored for the comprehensive annual performance analysis of a solar tower power plant coupled to a two-tank TES system, incorporating molten salts as the storage medium. The modelling of the power plant is conducted using OpenModelica, a versatile software platform renowned for its capability in system-level modelling and simulation. The simulation outcomes encompass a power plant configuration boasting a turbine gross output of 110 MWe. The results of performance parameters are subsequently contrasted with those generated by commercially available software tool, effectively corroborating the accuracy and effectiveness of the proposed simulation approach. The obtained results demonstrate a favourable concurrence in the transient behaviour of performance parameters, considering heat flows, state of charge, net power, and others, with a discrepancy of less than 1 % in annual production when benchmarked against a commercial software reference. Particularly, the incorporation of the local heat loss due to assembly defects within the thermal modelling of the TES system exerts a discernible albeit relatively minor influence on the overall performance of the power plant. The occurrence of local heat loss primarily stems from distortions or imperfections within the construction, including the structure, insulation layers, or foundation, thereby creating thermal bridges between the storage fluid and the external ambient environment. This impact, while small, is not negligible, as it introduces the potential for the power block to unexpectedly shut down owing to TES system depletion, a behaviour that is challenging to simulate when neglecting local heat loss., CSP-ERA.NET is supported by the European Commission within the EU Framework Programme for Research and Innovation Horizon 2020 (Cofund ERA-NET Action, N° 838311). This study receives funding from the Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (MCIN/AEI/10.13039/501100011033) through the PCI2020-120695-2 project and the European Union “NextGenerationEU”/“PRTR”. This work was partially funded by the Ministerio de Ciencia e Innovación de España TED2021-132216A-I00 funded by MCIN/AEI/10.13039/501100011033 and the European Union by NextGenerationEU/PRTR. This work was partially funded by Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2022-134219-T). This work is partially supported by ICREA under the ICREA Academia programme. The authors would like to thank the Departament de Recerca i Universitats of the Catalan Government for the quality accreditation given to their research group (2021 SGR 01615). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Steel slag concrete: thermo-mechanical stability under high-temperature cycles

  • Boquera, Laura
  • Castro Chicot, José Ramón
  • Fernández, Ángel G.
  • Navarro Ezquerra, Antonia
  • Pisello, Anna Laura
  • Cabeza, Luisa F.
INTRODUCTION: The improvement of the output efficiency in CSP plants is a challenge of major interest. To achieve this objective, an increase of temperature in the heat transfer and the storage media is required to increase power block efficiency. Among the suitable material options, concrete was determined to have attractive properties. Concrete is a heterogeneous material, made of several components that allows to choose the best dosage to obtain the desired properties in the final blender. Worldwide availability of concrete components and their low cost, contribute to implement eco-friendly measures. The environmental impact of the materials is a substantial parameter to take into consideration when selecting concrete components. There are by-products from industries that can be revalorized by including them into concrete mixtures, replacing cement percentage or using them as aggregates. A by-product from the metallurgy industry, known as steel slag or electric arc furnace slag, was previously studied as aggregates in concrete for thermal energy storage. In this paper, the thermal stability under high-temperature cycles, of two cement types with steel slag as the only aggregate in the concrete mixture is compared. As further novelty, the thermal cycles were adapted to heating rates currently used in the operation of a CSP plant. MATERIALS AND METHODS: In the present study two concrete dosages were designed. One using ordinary Portland cement and the other with calcium aluminate cement. In both binders, steel slag was used as aggregate, considering granulometries of 0-12 mm. Physical, thermal and mechanical properties were studied before and after thermal cycles. To study the thermal stability, 10 continuous thermal cycles were carried out. The thermal cycle profile consisted on a first cycle with a low heating rate 1 ºC/min up to 290 ºC followed by an isothermal step of 4 hours. Continuously, temperature increased up to 700 ºC with the same heating rate and maintaining during 4 hours. After, the samples were cooled down to 290 ºC, at a rate below 1 ºC/min. For the next cycles the heating rate was increased to 15 ºC/min, considering the same time for the isothermal steps and the cooling part. RESULTS: The external appearance showed a geometry preservation in all samples. There were no important cracks in the surface, only micro-fissures in the samples after some thermal cycles. There is a strong connection between the aggregates and both types of cement paste, conferring a bonding in the concrete mixture. No spalling signs nor thermal expansion of aggregates was observed. The mass loss was around 4 % in both mixtures after the thermal cycles. The thermal conductivity was reduced 50 % after the 10 thermal cycles. Despite the high compressive strength obtained before any thermal treatment, the compressive strength drastically decreased 80 % after the 10 thermal cycles. CONCLUSIONS: Despite the low thermal conductivity achieved after thermal cycles, a high integrity preservation of the concrete mixtures was observed. The compatibility of steel slag highlight with both cement types conferring a hydraulic bonding to the mixture, appreciating small fissures., CSPplus is supported under the umbrella of CSP-ERA-Net 1st Cofund Joint Call by AEI - Spanish Ministry of Science, Innovation and Universities, TÜBITAK - Scientific and Technological Research Council of Turkey, and CSO - Israeli Ministry of Energy. CSP-ERA-Net is supported by the European Commission within the EU Framework Programme for Research and Innovation HORIZON 2020 (Cofund ERA-NET Action, N° 838311) and this work was partially funded by Agencia Estatal de Investigación (AEI) - Ministerio de Ciencia, Innovación y Universidades (PCI2020-120695-2/AEI/10.13039/501100011033), Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE), and Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Dipòsit Digital de la UB
Publication Artículo científico (JournalArticle)

Assessment of Solid Wastes and By-Products as Solid Particle Materials for Concentrated Solar Power Plants

  • Majó Robles, Marc
  • Calderón Díaz, Alejandro
  • Salgado Pizarro, Rebeca
  • Svobodova Sedlackova, Adela
  • Barreneche, Camila
  • Chimenos Ribera, Josep Ma.
  • Fernández Renna, Ana Inés
The revalorization of solid wastes and by-products to be applied as solid particles in concentrated solar power (CSP) leads to cost savings and progresses toward more sustainable technology. Herein, the physicochemical, morphological, thermal, and solar absorption properties are evaluated for electric arc furnace dust, black slag from the steel industry, and Gossan waste from the Rio Tinto mining industry. The principal objectives of this work are (i) to carry out a thermal aging at 900 °C at different times, (ii) to assess the solid's stability throughout the evaluation of physicochemical, morphological, thermal, and optical properties of the material as received, after 300 and 500 h of thermal aging, and (iii) to determine the most appropriate candidate as a thermal energy storage medium and heat transfer fluid for the CSP concept with solid particles. The results show that electric arc furnace black slag is the most suitable candidate from the three solids studied, as it is the one that optimizes the combination of absorptance, thermal conductivity, and chemical stability after thermal aging.
Dipòsit Digital de la UB
Publication Artículo científico (JournalArticle)

Long-term stability of sensible thermal energy storage materials developed from demolition wastes interacting with hot heat transfer fluid

  • Koçak, Burcu
  • Fernández Renna, Ana Inés
  • Paksoy, Halime O.
Packed-bed thermal energy storage (TES) system filled with low cost and sustainable sensible thermal energy storage material (STESM) is a promising option for medium-high temperature applications. STESM developed from demolition wastes are eco-innovative and compatible with circular economy. They can be used in solar heat industrial applications up to 750°C. One of the main concerns that should be taken into consideration is the stability of STESM developed from demolition wastes in direct contact with hot heat transfer fluids (HTFs). In this study, thermal and mechanical stability of STESM developed from demolition waste were investigated using repeated heating and cooling cycles in Therminol 66 synthetic oil as HTF at 150°C for up to 500 hours. The characterization results before and after thermal cycling showed that new STESM developed from demolition wastes is thermally and mechanically stable. Also, strong oil penetration into the STESM samples improved the porosity, strength, and specific heat capacity. The specific heat capacity and mechanical strength values increased from 1330 to 1490 J/kgC and from 4 to 6 MPa, respectively. These results suggest that STESM samples developed from demolition waste can be used reliably in solar heat industrial applications for long term.
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Mathematical and Numerical Approach of Encapsulated Phase Change Material in Structured Thermocline Systems

  • Sanmartí Perona, Oriol|||0000-0002-0483-1800
  • Vera i Fernández, Jordi|||0000-0002-7696-3802
  • Torras Ortiz, Santiago|||0000-0001-5014-7383
  • Pérez Segarra, Carlos David|||0000-0003-1007-3142
An unsteady one-dimensional computational model has been developed to investigate the integration of encapsulated phase change materials in a structured thermal energy storage system. The model has been validated against experimental results available in the literature. The study examines three different phase change materials (NaNO3, KOH, and H380), focusing on how the accumulated energy varies with the thickness of the phase change material layer and the proximity of the melting point to the system’s operating temperatures., This work is carried out in the framework of the Newcline project. It is supported under the umbrella of CSP-ERA.NET 1st Cofund Joint Call and by the following National Agencies: AEI (Spain), CDTI (Spain), Jülich (Germany), SFOE (Switzerland). CSP-ERA.NET is supported by the European Commission within the EU Framework Programme for Research and Innovation Horizon 2020 (Cofund ERA-NET Action, Nº 838311). The first author acknowledges the financial support from the “Departament de Recerca i Universitats de la Generalitat de Catalunya” and the “Fons Social Europeu” with the predoctoral grant JOAN ORÓ FI AGAUR (2023 FI 00192).
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

A One-Dimensional Model and the Influence of the Mass Flow Rate in a Structured Thermal Energy Storage System for Concentrated Solar Power Plants

  • Sanmartí Perona, Oriol|||0000-0002-0483-1800
  • Vera i Fernández, Jordi|||0000-0002-7696-3802
  • Torras Ortiz, Santiago|||0000-0001-5014-7383
  • Pérez Segarra, Carlos David|||0000-0003-1007-3142
This study presents a one-dimensional model to simulate structured thermocline thermal energy storage tanks. The structure consists of a solid filler material made of waste ceramic products and a series of channels through which the heat transfer fluid flows. The mathematical model is validated against a more advanced model as there are no experimental results for this type of unit. An investigation is carried out on the influence of the mass flow rate on the behaviour of the system, and several parameters such as accumulated energy, outlet temperature, discharge time, discharge power, temperature profiles along the bed, and the exergy of the system for various cases are studied. The results show that an increase in mass flow rate leads to a reduction in accumulated energy because the fluid has less residence time in the structure, reaching the cutoff temperature earlier. The influence of the mass flow rate on the outlet temperature and how it affects the temperature profiles are also examined, resulting in a smaller hot upper zone and a reduction in the exergy of the system for higher mass flow rates., This work is carried out in the framework of the Newcline project. It is supported under the umbrella of CSPERA.NET 1st Cofund Joint Call and by the following National Agencies: AEI (Spain), CDTI (Spain), Jülich (Germany), SFOE (Switzerland). CSP-ERA.NET is supported by the European Commission within the EU Framework Programme for Research and Innovation Horizon 2020 (Cofund ERA-NET Action, Nº 838311). The first author acknowledges the financial support from the “Departament de Recerca i Universitats de la Generalitat de Catalunya” and the “Fons Social Europeu” with the predoctoral grant JOAN ORÓ FI AGAUR (2023 FI 00192)., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

A transient heat losses model for two-tank storage systems with molten salts

  • Tagle-Salazar, Pablo D.
  • Prieto, Cristina
  • López-Román, Antón
  • Cabeza, Luisa F.
Concentrating Solar Power (CSP) is a proven and mature technology for energy supply. In recent years, electricity generation based on this technology has increased worldwide, to a large degree due to its high dispatchability when coupled with an energy storage system. Commercially, most plants store the energy in molten salts in a two-tank configuration. This study focuses on this storage configuration and proposes a mathematical model for the thermal losses in these tanks, both at nominal conditions and during transients. With this model at its core, a computational tool for thermal performance analysis in OpenModelica is developed. This dynamic thermal model includes the estimation of local heat loss due to assembly defects, which are heat flows that cannot be determined by theoretical modelling. The development of a semi-empirical correlation for estimating local heat loss is also presented. Simulation results showed that this local heat loss may represent a share about 40% of the total heat loss in a small-scale tank. A comparison of the characteristics of the model proposed in a previous work is also presented to establish the innovation of the model. Two thermal storage systems with different tank designs and sizes were simulated to compare the results using the present model with data available in the literature. Results show good agreement in transient thermal behaviour of heat flows, temperatures, and cooling rates when compared with data from other authors for the same tank., This project was funded by the European Union's Horizon 2020 Research and Innovation Programme under No. 838311 (CSP plus). The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREiA (2021 SGR 01615). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work was partially funded by the Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (PID2021-123511OB-C31 - MCIN/AEI/10.13039/501100011033/FEDER, EU, TED2021-132216A-I00 and RED2022-134219-T). This work is partially supported by ICREA under the ICREA Academia programme.
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Recent trends and future perspectives on the use of phase change materials for thermal energy storage (CIES 2022)

  • Cabeza, Luisa F.
  • Borri, Emiliano
Vision: Being a reference group of engineering at an international level, always linked to the University of Lleida. Mission: To propose solutions to the industry in the fields of sustainability, energy engineering and control, through research, technology transfer and training. Objectives: To improve existing knowledge through research and innovation ; To help increase the competitiveness of companies through collaborations, whether for the design of new products or as a technology consultancy., This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31-MCIU/AEI/FEDER,UE), Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T-MCIU/AEI), Agencia Estatal de Investigación (AEI) - Ministerio de Ciencia, Innovación y Universidades (PCI2020-120695-2/AEI/10.13039/501100011033). Funding has also been received from European Union’s Horizon 2020 research and innovation program sunder projects SWS-HEATING (764025), CO-COOL (101007976), and CSPplus (CofundERA-NETAction, N°838311) The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017SGR1537) and the ICREA Catalan institution for awarding the ICREA Academy, for these condconsecutive time. GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Energia renovable, nova economia i abandonament o reforçament dels petits municipis

  • Cabeza, Luisa F.
  • Zsembinszki, Gabriel
  • Gasa, Gemma
Aquest treball està parcialment finançat pel Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 (FEDER)), Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T), Agencia Estatal de Investigación (AEI) - Ministerio de Ciencia, Innovación y Universidades (PCI2020-120695- 2/AEI/10.13039/501100011033), y Secretaria de Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya i és co-finançat per la Unió Europea a través del Fons Europeu de Desenvolupament Regional (FEDER) (2019PROD00101). També s’ha rebut finançament de l’Horitzo 2020 de l’Unió Europea dins de programes de recerca i innovació amb els projectes Innova MicroSOLAR (723596), HYBUILD (768824), SWSHEATING (764025), SolBio-Rev (814945) i CSPplus (Cofund ERA-NET Action, N° 838311). Agraïr també al Govern Català per l’acreditació de qualitat donada al grup de recerca (2017 SGR 1537) i a la institució catalana ICREA per la concessió de l’ICREA Acadèmia, per segona vegada consecutiva. GREiA és agent certificat TECNIO en la categoria de desenvolupadors de tecnologia de la Generalitat de Catalunya.
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Recent trends and future perspectives on the use of phase change materials for thermal energy storage (EIRES 2022)

  • Cabeza, Luisa F.
  • Borri, Emiliano
Vision: Being a reference group of engineering at an international level, always linked to the University of Lleida. Mission: To propose solutions to the industry in the fields of sustainability, energy engineering and control, through research, technology transfer and training. Objectives: To improve existing knowledge through research and innovation ; To help increase the competitiveness of companies through collaborations, whether for the design of new products or as a technology consultancy, This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31-MCIU/AEI/FEDER,UE), Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T-MCIU/AEI), Agencia Estatal de Investigación (AEI) - Ministerio de Ciencia, Innovación y Universidades (PCI2020-120695-2/AEI/10.13039/501100011033). Funding has also been received from European Union’s Horizon 2020 research and innovation program sunder projects SWS-HEATING (764025), CO-COOL (101007976), and CSPplus (CofundERA-NETAction, N°838311) The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017SGR1537) and the ICREA Catalan institution for awarding the ICREA Academy, for these condconsecutive time. GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

The role of buildings in climate change mitigation

  • Cabeza, Luisa F.
This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31-MCIU/AEI/FEDER,UE), Ministerio de Ciencia, Innovación y Universidades-Agencia Estatal de Investigación(AEI)(RED2018-102431-T-MCIU/AEI), Agencia Estatal de Investigación(AEI)-Ministerio de Ciencia, Innovación y Universidades (PCI2020-120695-2/AEI/10.13039/501100011033), and Secretaria de Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya and is co-financed by the European Union through the European Regional Development Fund(FEDER)(2019PROD00101). Funding has also be enreceived from European Union’s Horizon2020 research and innovation programs under projects Innova MicroSOLAR (723596), HYBUILD (768824), SWS-HEATING (764025), SolBio-Rev (814945), CSPplus (Cofund ERA-NET Action, N°838311), and CO-COOL (101007976). The authors would like to thank the Catalan Government for the quality accreditation given to the irresearch group (2017SGR1537) and the ICREA Catalan institution for awarding the ICREA Academy, for the second consecutive time. GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Transient performance modelling of solar tower power plants with molten salt thermal energy storage systems

  • Tagle-Salazar, Pablo D.
  • Cabeza, Luisa F.
  • Prieto, Cristina
Concentrating solar power (CSP) has emerged as a dynamic and promising technology, demonstrating a burgeoning market potential for power generation through the utilization of solar thermal resources. Notably, global installed capacity has witnessed a substantial uptick in recent years, indicative that this technology is increasing traction worldwide. To optimize the utilization of CSP systems, particularly during periods of low or absent solar radiation, the integration of thermal energy storage (TES) systems using molten salts has become a prevailing strategy. This research introduces an innovative transient modelling tailored for the comprehensive annual performance analysis of a solar tower power plant coupled to a two-tank TES system, incorporating molten salts as the storage medium. The modelling of the power plant is conducted using OpenModelica, a versatile software platform renowned for its capability in system-level modelling and simulation. The simulation outcomes encompass a power plant configuration boasting a turbine gross output of 110 MWe. The results of performance parameters are subsequently contrasted with those generated by commercially available software tool, effectively corroborating the accuracy and effectiveness of the proposed simulation approach. The obtained results demonstrate a favourable concurrence in the transient behaviour of performance parameters, considering heat flows, state of charge, net power, and others, with a discrepancy of less than 1 % in annual production when benchmarked against a commercial software reference. Particularly, the incorporation of the local heat loss due to assembly defects within the thermal modelling of the TES system exerts a discernible albeit relatively minor influence on the overall performance of the power plant. The occurrence of local heat loss primarily stems from distortions or imperfections within the construction, including the structure, insulation layers, or foundation, thereby creating thermal bridges between the storage fluid and the external ambient environment. This impact, while small, is not negligible, as it introduces the potential for the power block to unexpectedly shut down owing to TES system depletion, a behaviour that is challenging to simulate when neglecting local heat loss., CSP-ERA.NET is supported by the European Commission within the EU Framework Programme for Research and Innovation Horizon 2020 (Cofund ERA-NET Action, N° 838311). This study receives funding from the Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (MCIN/AEI/10.13039/501100011033) through the PCI2020-120695-2 project and the European Union “NextGenerationEU”/“PRTR”. This work was partially funded by the Ministerio de Ciencia e Innovación de España TED2021-132216A-I00 funded by MCIN/AEI/10.13039/501100011033 and the European Union by NextGenerationEU/PRTR. This work was partially funded by Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2022-134219-T). This work is partially supported by ICREA under the ICREA Academia programme. The authors would like to thank the Departament de Recerca i Universitats of the Catalan Government for the quality accreditation given to their research group (2021 SGR 01615). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

A One-Dimensional Model and the Influence of the Mass Flow Rate in a Structured Thermal Energy Storage System for Concentrated Solar Power Plants

  • Sanmartí Perona, Oriol
  • Vera i Fernández, Jordi
  • Torras Ortiz, Santiago
  • Pérez Segarra, Carlos David
This study presents a one-dimensional model to simulate structured thermocline thermal energy storage tanks. The structure consists of a solid filler material made of waste ceramic products and a series of channels through which the heat transfer fluid flows. The mathematical model is validated against a more advanced model as there are no experimental results for this type of unit. An investigation is carried out on the influence of the mass flow rate on the behaviour of the system, and several parameters such as accumulated energy, outlet temperature, discharge time, discharge power, temperature profiles along the bed, and the exergy of the system for various cases are studied. The results show that an increase in mass flow rate leads to a reduction in accumulated energy because the fluid has less residence time in the structure, reaching the cutoff temperature earlier. The influence of the mass flow rate on the outlet temperature and how it affects the temperature profiles are also examined, resulting in a smaller hot upper zone and a reduction in the exergy of the system for higher mass flow rates., This work is carried out in the framework of the Newcline project. It is supported under the umbrella of CSPERA.NET 1st Cofund Joint Call and by the following National Agencies: AEI (Spain), CDTI (Spain), Jülich (Germany), SFOE (Switzerland). CSP-ERA.NET is supported by the European Commission within the EU Framework Programme for Research and Innovation Horizon 2020 (Cofund ERA-NET Action, Nº 838311). The first author acknowledges the financial support from the “Departament de Recerca i Universitats de la Generalitat de Catalunya” and the “Fons Social Europeu” with the predoctoral grant JOAN ORÓ FI AGAUR (2023 FI 00192)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Life cycle assessment (LCA) of concentrating solar power (CSP) plant in tower configuration with and without thermal energy storage (TES)

  • Gasa, Gemma
  • López-Román, Antón
  • Cabeza, Luisa F.
  • Prieto, Cristina
INTRODUCTION: The main objective of the present study is to compare the 30-year life cycle assessment of two concentrating solar power systems with tower configuration, one without thermal energy storage and the other with thermal energy storage, in order to assess their potential impact on the environment. To achieve this aim, common reference characteristics have been defined in order to allow the optimal comparison. The reference power considered for both technologies has been 110 MW and the "power cycle" (turbine, alternator and generator) and the "cooling system" are the same in both configuration. In general terms, the significant differences between both configurations are focused on the area of the solar field, and with it the number of heliostats, and on the storage of thermal energy by inorganic salts. Although it is true that concentrating solar power plant (CSP) in tower without thermal energy storage is not a current commercial configuration, it is very interesting to be able to compare the environmental impacts of both configurations when thermal energy storage is added to the solar plant. In addition, the study ends by assessing whether the environmental impact that is generated by adding thermal energy storage compensates with the improvement of its manageability, its dispatchability and its contribution to decarbonisation. METHOD: Life cycle assessment (LCA) is a methodology that allows evaluating the environmental loads associated with a product, process or activity, identifying and quantifying the energy, the materials consumed and the waste released into the environment throughout the entire life cycle. The LCA included in this study is carried according to ISO 14040 and 14044. Thus, this LCA is based on the impact assessment method ReCiPe in impact points and GWP in kgCO2eq and the database used is Ecoivent 3.6, which has positioned itself as a world leader in creating more transparent life cycle impact databases. Moreover, this work encompasses three distinct phases of evaluation: manufacturing, operational, and end of life. RESULTS AND CONCLUSIONS: At the time of submitting this abstract, the study is on its way., This work was supported under the umbrella of CSP-ERA-Net 1st Cofund Joint Call by AEI - Spanish Ministry of Science, Innovation and Universities, TÜBITAK - Scientific and Technological Research Council of Turkey, and CSO - Israeli Ministry of Energy. CSP-ERA-Net is supported by the European Commission within the EU Framework Programme for Research and Innovation HORIZON 2020 (Cofund ERA-NET Action, N° 838311) and it was partially funded by Agencia Estatal de Investigación (AEI) - Ministerio de Ciencia, Innovación y Universidades (PCI2020-120695- 2/AEI/10.13039/501100011033), Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE), and Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018- 102431-T). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Steel slag concrete: thermo-mechanical stability under high-temperature cycles

  • Boquera, Laura
  • Castro Chicot, José Ramón
  • Fernández, Ángel G.
  • Navarro Ezquerra, Antonia
  • Pisello, Anna Laura
  • Cabeza, Luisa F.
INTRODUCTION: The improvement of the output efficiency in CSP plants is a challenge of major interest. To achieve this objective, an increase of temperature in the heat transfer and the storage media is required to increase power block efficiency. Among the suitable material options, concrete was determined to have attractive properties. Concrete is a heterogeneous material, made of several components that allows to choose the best dosage to obtain the desired properties in the final blender. Worldwide availability of concrete components and their low cost, contribute to implement eco-friendly measures. The environmental impact of the materials is a substantial parameter to take into consideration when selecting concrete components. There are by-products from industries that can be revalorized by including them into concrete mixtures, replacing cement percentage or using them as aggregates. A by-product from the metallurgy industry, known as steel slag or electric arc furnace slag, was previously studied as aggregates in concrete for thermal energy storage. In this paper, the thermal stability under high-temperature cycles, of two cement types with steel slag as the only aggregate in the concrete mixture is compared. As further novelty, the thermal cycles were adapted to heating rates currently used in the operation of a CSP plant. MATERIALS AND METHODS: In the present study two concrete dosages were designed. One using ordinary Portland cement and the other with calcium aluminate cement. In both binders, steel slag was used as aggregate, considering granulometries of 0-12 mm. Physical, thermal and mechanical properties were studied before and after thermal cycles. To study the thermal stability, 10 continuous thermal cycles were carried out. The thermal cycle profile consisted on a first cycle with a low heating rate 1 ºC/min up to 290 ºC followed by an isothermal step of 4 hours. Continuously, temperature increased up to 700 ºC with the same heating rate and maintaining during 4 hours. After, the samples were cooled down to 290 ºC, at a rate below 1 ºC/min. For the next cycles the heating rate was increased to 15 ºC/min, considering the same time for the isothermal steps and the cooling part. RESULTS: The external appearance showed a geometry preservation in all samples. There were no important cracks in the surface, only micro-fissures in the samples after some thermal cycles. There is a strong connection between the aggregates and both types of cement paste, conferring a bonding in the concrete mixture. No spalling signs nor thermal expansion of aggregates was observed. The mass loss was around 4 % in both mixtures after the thermal cycles. The thermal conductivity was reduced 50 % after the 10 thermal cycles. Despite the high compressive strength obtained before any thermal treatment, the compressive strength drastically decreased 80 % after the 10 thermal cycles. CONCLUSIONS: Despite the low thermal conductivity achieved after thermal cycles, a high integrity preservation of the concrete mixtures was observed. The compatibility of steel slag highlight with both cement types conferring a hydraulic bonding to the mixture, appreciating small fissures., CSPplus is supported under the umbrella of CSP-ERA-Net 1st Cofund Joint Call by AEI - Spanish Ministry of Science, Innovation and Universities, TÜBITAK - Scientific and Technological Research Council of Turkey, and CSO - Israeli Ministry of Energy. CSP-ERA-Net is supported by the European Commission within the EU Framework Programme for Research and Innovation HORIZON 2020 (Cofund ERA-NET Action, N° 838311) and this work was partially funded by Agencia Estatal de Investigación (AEI) - Ministerio de Ciencia, Innovación y Universidades (PCI2020-120695-2/AEI/10.13039/501100011033), Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE), and Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Social Acceptance of TES

  • Cabeza, Luisa F.
This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE), Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T - MCIU/AEI), Agencia Estatal de Investigación (AEI) - Ministerio de Ciencia, Innovación y Universidades (PCI2020-120695- 2/AEI/10.13039/501100011033), and Secretaria de Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya and is co-financed by the European Union through the European Regional Development Fund (FEDER) (2019PROD00101). Funding has also been received from European Union’s Horizon 2020 research and innovation programs under projects Innova MicroSOLAR (723596), HYBUILD (768824), SWS-HEATING (764025), SolBio-Rev (814945), CSPplus (Cofund ERA-NET Action, N° 838311), and CO-COOL (101007976). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537) and the ICREA Catalan institution for awarding the ICREA Academy, for the second consecutive time. GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Long-term stability of sensible thermal energy storage materials developed from demolition wastes interacting with hot heat transfer fluid

  • Koçak, Burcu
  • Fernández Renna, Ana Inés
  • Paksoy, Halime O.
Packed-bed thermal energy storage (TES) system filled with low cost and sustainable sensible thermal energy storage material (STESM) is a promising option for medium-high temperature applications. STESM developed from demolition wastes are eco-innovative and compatible with circular economy. They can be used in solar heat industrial applications up to 750°C. One of the main concerns that should be taken into consideration is the stability of STESM developed from demolition wastes in direct contact with hot heat transfer fluids (HTFs). In this study, thermal and mechanical stability of STESM developed from demolition waste were investigated using repeated heating and cooling cycles in Therminol 66 synthetic oil as HTF at 150°C for up to 500 hours. The characterization results before and after thermal cycling showed that new STESM developed from demolition wastes is thermally and mechanically stable. Also, strong oil penetration into the STESM samples improved the porosity, strength, and specific heat capacity. The specific heat capacity and mechanical strength values increased from 1330 to 1490 J/kgC and from 4 to 6 MPa, respectively. These results suggest that STESM samples developed from demolition waste can be used reliably in solar heat industrial applications for long term.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Assessment of Solid Wastes and By-Products as Solid Particle Materials for Concentrated Solar Power Plants

  • Majó Robles, Marc
  • Calderón Díaz, Alejandro
  • Salgado Pizarro, Rebeca
  • Svobodova Sedlackova, Adela
  • Barreneche, Camila
  • Chimenos Ribera, Josep Ma.
  • Fernández Renna, Ana Inés
The revalorization of solid wastes and by-products to be applied as solid particles in concentrated solar power (CSP) leads to cost savings and progresses toward more sustainable technology. Herein, the physicochemical, morphological, thermal, and solar absorption properties are evaluated for electric arc furnace dust, black slag from the steel industry, and Gossan waste from the Rio Tinto mining industry. The principal objectives of this work are (i) to carry out a thermal aging at 900 °C at different times, (ii) to assess the solid's stability throughout the evaluation of physicochemical, morphological, thermal, and optical properties of the material as received, after 300 and 500 h of thermal aging, and (iii) to determine the most appropriate candidate as a thermal energy storage medium and heat transfer fluid for the CSP concept with solid particles. The results show that electric arc furnace black slag is the most suitable candidate from the three solids studied, as it is the one that optimizes the combination of absorptance, thermal conductivity, and chemical stability after thermal aging.
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Development of a new concrete for high-temperature thermal energy storage

  • Cabeza, Luisa F.
  • Boquera, Laura
  • Castro Chicot, José Ramón
  • Pisello, Anna Laura
Vision: Being a reference group of engineering at an international level, always linked to the University of Lleida. Mission: To propose solutions to the industry in the fields of sustainability, energy engineering and control, through research, technology transfer and training. Objectives: To improve existing knowledge through research and innovation ; To help increase the competitiveness of companies through collaborations, whether for the design of new products or as a technology consultancy., This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE), Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T - MCIU/AEI), Agencia Estatal de Investigación (AEI) - Ministerio de Ciencia, Innovación y Universidades (PCI2020-120695- 2/AEI/10.13039/501100011033), and Secretaria de Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya and is co-financed by the European Union through the European Regional Development Fund (FEDER) (2019PROD00101). Funding has also been received from European Union’s Horizon 2020 research and innovation programs under the project CSPplus (Cofund ERA-NET Action, N° 838311). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537) and the ICREA Catalan institution for awarding the ICREA Academy, for the second consecutive time. GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Mathematical and Numerical Approach of Encapsulated Phase Change Material in Structured Thermocline Systems

  • Sanmartí Perona, Oriol
  • Vera i Fernández, Jordi
  • Torras Ortiz, Santiago
  • Pérez Segarra, Carlos David
An unsteady one-dimensional computational model has been developed to investigate the integration of encapsulated phase change materials in a structured thermal energy storage system. The model has been validated against experimental results available in the literature. The study examines three different phase change materials (NaNO3, KOH, and H380), focusing on how the accumulated energy varies with the thickness of the phase change material layer and the proximity of the melting point to the system’s operating temperatures., This work is carried out in the framework of the Newcline project. It is supported under the umbrella of CSP-ERA.NET 1st Cofund Joint Call and by the following National Agencies: AEI (Spain), CDTI (Spain), Jülich (Germany), SFOE (Switzerland). CSP-ERA.NET is supported by the European Commission within the EU Framework Programme for Research and Innovation Horizon 2020 (Cofund ERA-NET Action, Nº 838311). The first author acknowledges the financial support from the “Departament de Recerca i Universitats de la Generalitat de Catalunya” and the “Fons Social Europeu” with the predoctoral grant JOAN ORÓ FI AGAUR (2023 FI 00192)., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Advancing sensible heat storage: A novel transient heat transfer model for concrete-based TES modules for CSP applications

  • Tagle-Salazar, Pablo D.
  • Cabeza, Luisa F.
  • Prieto, Cristina
Concentrating solar power (CSP) plays a crucial role in renewable energy systems, offering high-temperature heat for electricity generation and industrial processes while supporting the transition to sustainable energy. Thermal energy storage (TES) improves the reliability and dispatchability of CSP systems. Among the sensible heat storage options, concrete emerges as a cost-effective and eco-friendly alternative that warrants further investigation. This study introduces a comprehensive mathematical model for simulating the transient thermal behaviour of concrete-based TES modules. The model accommodates diverse geometries, supports a wide range of heat transfer fluids (HTFs) in all flow regimes, and accounts for heat losses to the environment, factors that are often overlooked in prior research. The mathematical framework was incorporated into a software platform called OpenModelica and will later be included in a tool developed by the authors to evaluate the performance of CSP plants. Before this integration takes place, the model undergoes validation, which is the primary focus of this study. The model was validated through two case studies, one theoretical and the other experimental, each involving different operational conditions, geometries, HTFs, and materials. The theoretical case confirmed that the model could capture the key physical phenomena governing transient heat transfer in the storage module. A comparison between the simulation results and experimental data revealed a strong agreement in temperature, heat flow, and total energy transmitted, with temperature errors within the IEC 60751 standard and total energy transfer errors ranging from −6.15 % to +5.69 %. These findings highlight the potential of concrete-based TES to enhance the performance of CSP systems, contributing to reliable and sustainable energy solutions., CSP-ERA.NET is supported by the European Commission within the EU Framework Programme for Research and Innovation Horizon 2020 (Cofund ERA-NET Action, N◦ 838311). This study receives funding from the Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (MCIN/AEI/10.13039/501100011033) through the PCI2020-120695-2 project and the European Union “NextGenerationEU"/PRTR”. This work was partially funded by the Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (AEI) (PID2021-123511OB-C31 - MCIN/AEI/ 10.13039/501100011033/FEDER, UE), and by Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (AEI) (RED2024-153629- T). This work is partially supported by ICREA under the ICREA Academia programme. The authors would like to thank the Departament de Recerca i Universitats of the Catalan Government for the quality accreditation given to their research group (2021 SGR 01615). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

A technical and economic comparison between concrete and latent thermal energy storage for concentrated solar power applications

  • Prieto, Cristina
  • Borri, Emiliano
  • Pavón Moreno, M. Carmen
  • Zsembinszki, Gabriel
  • Cabeza, Luisa F.
Thermal energy storage (TES) plays a key role in concentrating solar power (CSP) plants by enhancing dispatchability and improving overall system efficiency. This study presents a comparative techno-economic analysis of three TES configurations integrated into CSP plants: (i) the conventional two-tank molten salt system, (ii) a phase change material (PCM)-based system with a cascade arrangement, and (iii) a concrete-based system. While technical performance simulations indicate similar annual energy production across all cases, significant differences emerge in economic viability. The PCM TES system demonstrates the lowest levelized cost of electricity (LCoE) at $14.35/kWh, leveraging its high energy density and reduced material requirements, despite lower efficiency (93 % compared to 99 % in molten salt). Conversely, the concrete TES system, while capable of extended discharge at partial loads, incurs higher parasitic losses and investment costs, resulting in a higher LCoE ($16.16/kWh). The cost analysis further highlights the cost-performance quotient (CPQ) as a valuable metric for assessing TES competitiveness, with PCM exhibiting the most favorable CPQ of $1.04/kWh. These findings underscore the necessity of integrating economic assessments into TES selection for CSP plants. Moreover, the study identifies opportunities for cost reduction in concrete TES through optimized modular designs and improved material formulations. This work provides valuable insights for policymakers, engineers, and industry stakeholders aiming to enhance the financial feasibility of next-generation CSP storage solutions., This study receives funding from the Ministerio de Ciencia e Innovación – Agencia Estatal de Investigación (MCIN/AEI/10.13039/501100011033) through the PCI2020-120695-2 project and the European Union “NextGenerationEU”/PRTR“. CSP-ERA.NET is supported by the European Commission within the EU Framework Programme for Research and Innovation Horizon 2020 (Cofund ERA-NET Action, N° 838311). This work was partially funded by the Ministerio de Ciencia e Innovación de España TED2021-132216A-I00 funded by MCIN/AEI/10.13039/501100011033 and the European Union by NextGenerationEU/PRTR. This work was partially funded by the Ministerio de Ciencia e Innovación – Agencia Estatal de Investigación (AEI) (PID2021-123511OB-C31 – MCIN/AEI/10.13039/501100011033/FEDER, UE) and (RED2022-134219-T). This work is partially supported by ICREA under the ICREA Academia programme. The authors from University of Lleida would like to thank the Departament de Recerca i Universitats of the Catalan Government for the quality accreditation given to their research group (2021 SGR 01615). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Recent trends and future perspectives on the use of phase change materials for thermal energy storage (CNIT 2022)

  • Cabeza, Luisa F.
  • Borri, Emiliano
Vision: Being a reference group of engineering at an international level, always linked to the University of Lleida. Mission: To propose solutions to the industry in the fields of sustainability, energy engineering and control, through research, technology transfer and training. Objectives: To improve existing knowledge through research and innovation ; To help increase the competitiveness of companies through collaborations, whether for the design of new products or as a technology consultancy., This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31-MCIU/AEI/FEDER,UE), Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T-MCIU/AEI), Agencia Estatal de Investigación (AEI) - Ministerio de Ciencia, Innovación y Universidades (PCI2020-120695-2/AEI/10.13039/501100011033). Funding has also been received from European Union’s Horizon 2020 research and innovation program sunder projects SWS-HEATING (764025), CO-COOL (101007976), and CSPplus (CofundERA-NETAction, N°838311) The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017SGR1537) and the ICREA Catalan institution for awarding the ICREA Academy, for these condconsecutive time. GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Definition of key performance indicators (KPIs) to evaluate innovative storage systems in concentrating solar power (CSP) plants

  • Cabeza, Luisa F.
  • Borri, Emiliano
  • Gasa, Gemma
  • Zsembinszki, Gabriel
  • López-Román, Antón
  • Prieto, Cristina
The increasing penetration of renewable energies into the energy system is leading to significant development and deployment of generation plants based on the use of solar energy. On large scale, concentrating solar power (CSP) plants is the starring technology. In those systems, thermal energy storage (TES) is an essential component that allows both providing dispatchability and increasing power production thus improving the plant efficiency and reducing both its size and cost. Current storage technologies are mainly based on solar salts (molten salts) and saturated steam, their main drawback being their operating temperatures. Therefore, the current challenge is to develop innovative solutions that allow CSP plants to work at higher temperatures to increase their efficiency. In order to allow the comparison of new TES concepts, the definition of proper key performance indicators (KPIs) helps to better identify the best storage solutions. This paper reports a preliminary selection of KPIs suitable for TES systems and their validation against the commercially available two-tanks molten salts storage concept for a 100 MW net capacity CSP tower plant to allow the comparison with innovative solutions. The results of this study can be used as a basis for comparison of TES technologies with the available ones, as well as to set the target for the research and development of future storage solutions., CSPplus is supported under the umbrella of CSP-ERA-Net 1st Cofund Joint Call by AEI - Spanish Ministry of Science, Innovation and Universities, TÜBITAK - Scientific and Technological Research Council of Turkey, and CSO - Israeli Ministry of Energy. CSP-ERA-Net is supported by the European Commission within the EU Framework Programme for Research and Innovation HORIZON 2020 (Cofund ERA-NET Action, N° 838311) and this work was partially funded by Agencia Estatal de Investigación (AEI) - Ministerio de Ciencia, Innovación y Universidades (PCI2020-120695-2/AEI/10.13039/501100011033), and Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE) and by the Ministerio de Ciencia, Innovación y Universidades-Agencia Estatal de Investigación (AEI) (RED2018-102431-T- AEI). This work is partially supported by ICREA under the ICREA Academia programme. The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.