Skip to main content

IDENTIFICACION DE BARRERAS Y OPORTUNIDADES SOSTENIBLES EN LOS MATERIALES Y APLICACIONES DEL ALMACENAMIENTO DE ENERGIA TERMICA

ENE2015-64117-C5-1-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2015
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Dirección General de Investigación Científica y Técnica
Beneficiary centre UNIVERSIDAD DE LLEIDA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 173
Encontrada(s) 2 página(s)

Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Benchmarking of useful phase change materials for a building application

  • Navarro Farré, Lidia
  • Solé, Aran
  • Martín, Marc
  • Barreneche Güerisoli, Camila
  • Olivieri, Lorenzo
  • Tenorio, José Antonio
  • Cabeza, Luisa F.
Nowadays, there is an increasing interest in more efficient building materials and new technologies to accomplish the objectives defined by energy policies. The combination of energy efficient building designs and integration of renewable energies makes the use of thermal energy storage (TES) necessary. Within this context, the improvement of building envelopes by the use of phase change materials (PCM) has been widely studied. The PCM selection should fulfil the requirements of the specific application. In this study, a benchmarking of PCM available in the market was performed to undertake a material selection for a specific building application. The incorporation of PCM into a radiant wall technology present several requirements with especial interest on long-term thermal stability. A complete laboratory-scale characterization has been carried out considering the following properties: temperature of phase change, specific heat capacity, thermal conductivity, and stability., Financiado por el proyecto RTC-2015-3583-5 (INPHASE) del Ministerio de Economía y Competitividad, dentro del Programa Estatal de Investigación, Desarrollo e Innovación Orientada a los Retos de la Sociedad, en el marco del Plan Estatal de Investigación Científica y Técnica y de Innovación 2013-2016, y ha sido cofinanciado con FONDOS FEDER, con el objetivo de promover el desarrollo tecnológico, la innovación y una investigación de calidad. The work is partially funded by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER) and ENE2015-64117-C5-2-R (MINECO/FEDER)). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537 and 2017 SGR 188). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. Camila Barreneche would like to thank ACCIO for her Grant TecnioSpring Plus TECSPR17-1-0071. Aran Solé would like to thank Ministerio de Economia y Competitividad de España for Grant Juan de la Cierva FJCI-2015-25741.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Review of Reactors with Potential Use in Thermochemical Energy Storage in Concentrated Solar Power Plants

  • Zsembinszki, Gabriel
  • Solé, Aran
  • Barreneche Güerisoli, Camila
  • Prieto, Cristina
  • Fernández Renna, Ana Inés
  • Cabeza, Luisa F.
The aim of this study is to perform a review of the state-of-the-art of the reactors available in the literature, which are used for solid-gas reactions or thermal decomposition processes around 1000 ºC that could be further implemented for thermochemical energy storage in CSP (concentrated solar power) plants, specifically for SPT (solar power tower) technology. Both direct and indirect systems can be implemented, with direct and closed systems being the most studied ones. Among direct and closed systems, the most used configuration is the stacked bed reactor, with the fixed bed reactor being the most frequent option. Out of all of the reactors studied, almost 70% are used for solid-gas chemical reactions. Few data are available regarding solar efficiency in most of the processes, and the available information indicates relatively low values. Chemical reaction efficiencies show better values, especially in the case of a fluidized bed reactor for solid-gas chemical reactions, and fixed bed and rotary reactors for thermal decompositions., The work is partially funded by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER) and ENE2015-64117-C5-2-R (MINECO/FEDER)). The authors would like to thank the Catalan Government for the quality accreditation given to their research groups GREA (2017 SGR 1537) and DIOPMA (2017 SGR 118). GREA and DIOPMA are certified agents TECNIO in the category of technology developers from the Government of Catalonia. Dr. Aran Solé would like to thank Ministerio de Economía y Competitividad de España for Grant Juan de la Cierva, FJCI-2015-25741.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Are users' ratings on TripAdvisor similar to hotel categories in Europe?, ¿Se parecen las puntuaciones de los usuarios en TripAdvisor con las categorías hoteleras en Europa?

  • Martín Fuentes, Eva
  • Mateu Piñol, Carles
  • Fernàndez Camon, César
European countries do not have the same hotel classification system. Therefore, the criteria and requirements used to assign star ratings to hotels do not concur among the different countries. There have been some criticisms about the way hotel stars are assigned, because the requirements do not necessarily match the quality of service offered. Technical criteria such as infrastructure and room dimensions are taken into account, but users do not perceive them although these have nothing to do with the satisfaction. This study aims to determine whether the hotel category of about 80,000 hotels in 9 different European countries on TripAdvisor is related to customer satisfaction, measured from the point of view of the user ratings on this site. The one-way ANOVA test shows that there are significant differences between the average ratings of the hotel category, except in the classification of 1-star and 2-star hotels from most countries analysed that behave similarly, and 1-star and 3-star hotels from Austria, Greece, Portugal, Spain and UK that are ranked similarly.., Los hoteles de Europa no siguen el mismo sistema de clasificación hotelera, por lo que los criterios y los requerimientos usados para asignar las estrellas no coinciden entre países, e incluso ni entre regiones de un mismo país. Hay algunas críticas sobre la forma de asignar las estrellas hoteleras porque los requisitos establecidos no coinciden necesariamente con la calidad del servicio ofrecido. Por eso, este estudio determina si la categoría hotelera de más de 80.000 hoteles en 9 países europeos está relacionada con la satisfacción de los clientes, medida a través de las puntuaciones otorgadas en TripAdvisor. A través de un contraste ANOVA se demuestra que hay diferencias significativas entre las puntuaciones medias de cada categoría hotelera, excepto en las categorías de 1 y 2 estrellas en la mayoría de países analizados que se comportan de forma similar, y entre 1 y 3 estrellas de Austria, Grecia, Portugal, España y Reino Unido que también se comportan de manera parecida., This work was partially funded by the Spanish Ministry of Economy, Industry and Competitiveness: research project TIN2015-71799-C2-2-P, ENE2015-64117-C5-1-R, and ECO2017-88984-R.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

How internal heat loads of buildings affect the effectiveness of vertical greenery systems? An experimental study

  • Coma Arpón, Julià
  • Chàfer, Marta
  • Pérez Luque, Gabriel
  • Cabeza, Luisa F.
Nature-based solutions applied to the building skin, such as green roofs and vertical greenery systems, are standing out as the most promising by contributing with thermal improvements at building scale. From previous research done by GREiA research group at the University of Lleida (Spain), energy savings up to 58% were obtained by implementing vertical greenery systems on external building walls for cooling purposes. However, since there exist other passive and active energy saving technologies in the literature review that were limited their cooling and heating capacity after implementing internal heat loads, new experimental tests for two different vertical greenery systems simulating the heat loads in both, summer and winter were conducted in this research. Additionally, these experiments also improve the scarce and controversial literature for winter conditions. The results demonstrated that considering internal loads in experimental investigations is crucial for the results of the effectiveness of the green walls and green facades. The energy savings of VGS were reduced between 22.5% and 26.7% because of the internal loads for cooling purposes, and increased about 3.6% and 3.1% for heating., The work is partially funded by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER) and ULLE10-4E-1305). GREA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537), and the city hall of Puigverd de Lleida. Julià Coma would like to thank Ministerio de Economia y Competitividad de España for Grant Juan de la Cierva, FJCI-2016-30345.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Thermal energy storage (TES) with phase change materials (PCM) in solar power plants (CSP). Concept and plant performance

  • Prieto, Cristina
  • Cabeza, Luisa F.
Concentrated solar power (CSP) is today recognized as a unique renewable energy for electricity generation due to its capability to provide dispatchable electricity incorporating thermal energy storage (TES). Molten salts TES is the most widespread technology in commercial CSP but the industry is looking for cheaper and more efficient TES systems and phase change materials (PCM) have been highlighted as potential low cost and high energy TES systems. This paper presents a completely new concept of PCM energy storage systems to be used in solar thermal electricity plants with its technical assessment. A cascade type PCM storage system is evaluated, using four buckets with the PCM organized based on melting temperature and the latent energy of the materials. Daily, monthly, and annual transient simulations of the plant performance are carried out. The main conclusion is the similarity between this new concept and the commercial two-tank indirect molten salt system. The cumulative power production over the year is similar and the net production of both systems is well matched., The work was partially funded by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER)). Dr. Cabeza would like to thank the Catalan Government for the quality accreditation given to her research group (2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Phase change material selection for two innovative compact energy storage systems in residential buildings

  • Zsembinszki, Gabriel
  • Gasia, Jaume
  • Oró Prim, Eduard
  • Cabeza, Luisa F.
Within the framework of HYBUILD, an EU Horizon 2020-funded project, two innovative compact hybrid electrical/thermal storage systems for stand-alone and district connected residential buildings will be developed and tested in three demos located in Spain, France, and Cyprus. One of the innovative systems is aimed to be placed in buildings located in Mediterranean climate regions, where cooling loads are dominant, while the other system is intended for Continental climate regions, where the heating demand is dominant. Each system will include, among others components such as a sorption storage system and domestic hot water tanks, a latent thermal energy storage (LTES) system that will be connected to a heat pump through an innovative heat exchanger made of aluminium and filled with phase change material (PCM). In both cases, the heat pump works with electricity provided by a photovoltaic system that is, at the same time, connected to an electrical storage battery. The aim of using the LTES system is to enhance the use of solar energy, which will be translated into a reduction of the building energy consumption and related costs. This study focuses on the selection of the most suitable PCM to be used in each system. On the one hand, the LTES system of the Mediterranean system will be used to store cold to reduce the cooling demand. Taking into account that, according to the design parameters, the heat pump will require a refrigerant evaporation temperature around 2 ºC, and the building cooling system will require water supply in the range from 7 ºC to 12 ºC, the PCM melting temperature range should be within 0 ºC and 7 ºC. On the other hand, the LTES system of the Continental system will be used to store heat to reduce the domestic hot water (DHW) demand. The LTES will be located at the compressor outlet and will be charged by the hot refrigerant that exits the compressor at temperatures as high as 120 ºC. During the discharge process, the heat stored in the LTES will be supplied to the DHW at a temperature in the range between 50 ºC to 55 ºC. As a consequence, the range for the PCM melting temperature investigated in this case should be between 62 ºC and 68 ºC. Besides the melting temperature, other selection criteria considered include the PCM melting enthalpy and melting range, maximum allowed working temperature, density, thermal conductivity, availability, cost, and compatibility with aluminium. To decide the ideal PCM candidate for each system, a decision matrix was defined and used, by applying a weighted score to the selection criteria items according to their importance. The preliminary results indicate that for the Mediterranean system the best candidate is the commercial savE OM3 PCM, while for the Continental system, another commercial product PureTemp 63 is the most adequate option., This work was partially funded by the Ministerio de Economía y Competitividad de España (ENE2015- 64117-C5-1-R (MINECO/FEDER)). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (GREiA 2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. Jaume Gasia would like to thank the Departament d'Universitats, Recerca i Societat de la Informació de la Generalitat de Catalunya for his research fellowship (2018 FI_B2 00100). This project has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No 768824 (HYBUILD)
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Effects of sodium nitrate concentration on thermophysical properties of solar salts and on the thermal energy storage cost

  • Durth, Melanie
  • Prieto, Cristina
  • Rodríguez-Sánchez, Alfonso
  • Patiño-Rodríguez, David
  • Cabeza, Luisa F.
Thermal energy storage (TES) systems are key components of concentrating solar power plants in order to offer energy dispatchability to adapt the electricity power production to the curve demand. Nitrate molten salts are the storage media used today in concentrated solar power plants. They are also used as heat transfer fluid (HTF) in the molten salt tower (MST) technology. Traditional MST plants work in the temperature range of 240-565 °C using the so-called solar salt, a mixture of 60-40 wt% of NaNO3 and KNO3. This study wants to optimize the thermal energy storage cost of the solar concentration technology by analysing different mixtures of solar salts, using different percentages of NaNO3 and KNO3 in the mixture. The new mixtures seek a reduction in the cost of the storage material while optimizing its physical and chemical properties. The study shows how an increase in the proportion of sodium nitrate for a new binary solar salt to 78-22 wt%, produces an increase in the heat capacity of the mixture by reducing the necessary inventory of salts in the system. However, the new salt presents an increase in the melting point, going from 240 °C to 279 °C, which makes the operation of the system difficult. The impact on the cost of this optimization in the performance of a commercial plant was analysed. The plant chosen to evaluate the impact is a tower technology plant with 85 MWe power and 13 h of storage. The study shows a LCOE reduction of up to 0.6% for the new mixture with higher sodium nitrate., The work is partially funded by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER)). Dr. Cabeza would like to thank the Catalan Government for the quality accreditation given to her research group GREiA (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Magnesium sulphate-silicone foam composites for thermochemical energy storage: Assessment of dehydration behaviour and mechanical stability

  • Calabrese, Luigi
  • Brancato, Vincenza
  • Palomba, Valeria
  • Frazzica, Andrea
  • Cabeza, Luisa F.
This paper assesses the mechanical stability and dehydration behaviour of a new composite material constituted by magnesium sulphate hepta-hydrate, used as filler at vary contents, and a porous silicone, used as matrix in order to evaluate its applicability in sorption thermal energy storage field. This new composite was developed to avoid the typical issues of salt hydrates such as swelling, agglomeration and corrosion issues occurring during hydration/dehydration process. A preliminary physical-mechanical characterization, by means of morphological and calorimetric analysis, was carried out to investigate the main properties of the composite foams. The morphological characterization showed that the foam pores were homogenously distributed and well interconnected to each other. Thermogravimetric dehydration tests, have demonstrated that the tested samples are able to exchange efficiently water. Static compression tests evidenced a high compression stability of the material, indicating a high flexibility of the cellular silicone structure. Furthermore, cyclic compression test was performed to evaluate the progressive loss of salt at increasing number of the cycles. After 50 cycles, a reduction of salt hydrate up to 13% was observed. This behaviour, that is potentially a critical factor in these composite structures, was studied for showing that the loss of the salt does not compromise considerably the sorption storage performance of the filled silicone foams. Eventually, the assessment of thermo-gravimetric characteristics and mechanical stability was performed on the MgSO4·7H2O silicone composite foam., The work was partially funded by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER)). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Multifunctional smart concretes with novel phase change materials: Mechanical and thermo-energy investigation

  • D'Alessandro, Antonella
  • Pisello, Anna Laura
  • Fabiani, Claudia
  • Ubertini, Filippo
  • Cabeza, Luisa F.
  • Cotana, Franco
Energy performance in buildings and integrated systems represents a key aspect influencing anthropogenic emissions worldwide. Therefore, novel multifunctional materials for improving envelope thermo-energy efficiency through passive techniques are presently attracting notable researchers' effort. In this view, the integration of phase change materials (PCMs) into structural concrete showed interesting effects in enhancing the material thermal capacity while keeping proper structural strength. This work presents a multiphysics thermomechanical investigation concerning innovative concretes incorporating paraffin-based PCM suitable for structural-thermal multifunctional applications in high-energy efficiency building envelopes. Both classic microPCM-capsules and the novel more pioneering macroPCM-capsules with 18 °C phase transition temperature are used for the new composite preparation. Results confirm the thermal benefits of PCM and demonstrate that the addition of PCM reduces the mass density of concrete by almost twice PCMs weight. Average compressive strength decreases with increasing the amount of PCM, but its coefficient of variation is not as negatively affected, which is promising in terms of structural reliability. Indeed, a 1% weight content of microPCM and macroPCM results in reduced coefficients of variation of the compressive strength, determining an increase in characteristic compressive strength. This benefit might be associated to both a filler effect of the PCM and to a positive thermal interaction between inclusions and cement hydration products. The multifunctional analysis showed promising performance of PCM-based macro-capsules as aggregates, even if their concentration is relatively minor than the classic micro-capsules already acknowledged as effective additives for high energy efficient cement-based materials., Acknowledgments are due to the “CIRIAF program for UNESCO” in the framework of the UNESCO Chair “Water Resources Management and Culture”. The research leading to these results has received funding from the European Union’s Horizon 2020 Research and Innovation Programme under grant agreement No. 657466 (INPATH-TES). The authors also thank the Microtek Laboratories, Inc. for providing the capsulated materials. The work is also partially funded by the Spanish Government (ENE2015-64117-C5-1-R). Prof. Luisa F. Cabeza would like to thank the Catalan Government for the quality accreditation given to her research group (2014 SGR 123).
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Optimized demand side management (DSM) of peak electricity demand by coupling low temperature thermal energy storage (TES) and solar PV

  • Saffari Tabalvandani, Mohammad
  • Gracia Cuesta, Alvaro de
  • Fernàndez Camon, César
  • Belusko, Martin
  • Boer, Dieter
  • Cabeza, Luisa F.
Cooling in the industry sector contributes significantly to the peak demand placed on an electrical utility grid. New electricity tariff structures include high charges for electricity consumption in peak hours which leads to elevated annual electricity costs for high-demanding consumers. Demand side management (DSM) is a promising solution to increase the energy efficiency among customers by reducing their electricity peak demand and consumption. In recent years, researchers have shown an increased interest in utilizing DSM techniques with thermal energy storage (TES) and solar PV technologies for peak demand reduction in industrial and commercial sectors. The main objective of the present study is to address the potential for applying optimization-based time-of-use DSM in the industry sector by using cold thermal energy storage and off-grid solar PV to decrease and shift peak electricity demands and to reduce the annual electricity consumption costs. The results show that when cold thermal energy storage and solar PV are coupled together higher annual electricity cost savings can be achieved compared to using these two technologies independently. Additionally, considerable reductions can be seen in electricity power demands in different tariff periods by coupling thermal energy storage with off-grid solar PV., The work partially funded by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER), ENE2015-64117-C5-3-R (MINECO/FEDER), and TIN2015-71799-C2-2-P). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2014 SGR 123) and the city hall of Puigverd de Lleida. This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 657466 (INPATH-TES). Alvaro de Gracia would like to thank Ministerio de Economia y Competitividad de España for Grant Juan de la Cierva, FJCI-2014-19940.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

High density polyethylene spheres with PCM for domestic hot water applications: Water tank and laboratory scale study

  • Navarro Farré, Lidia
  • Barreneche Güerisoli, Camila
  • Castell, Albert
  • Redpath, David A.G.
  • Griffiths, Philip
  • Cabeza, Luisa F.
Renewable energy is a potential alternative energy provider with fewer CO2 emissions. However, the mismatch between energy supply and demand is the main disadvantage. Therefore, thermal energy storage becomes an essential technology for enhancing renewable energy efficiency and providing energy supply to the end user. In solar thermal energy systems, hot water tanks are widely used as sensible heat storage technology. Moreover, water storage usually requires large volumes and their improvement has been studied in terms of shape and arrangement. Latent heat storage materials are a potential technology for implementation in water storage tanks in order to reduce their volume and to enhance their efficiency. In this paper, the incorporation of shape high density polyethylene spheres with PCM into domestic hot water tanks is studied. Undesired results obtained in the water tank set-up lead the authors to analyse the PCM leakage in the laboratory. Laboratory analysis pointed out that the PCM-spheres must be thermally cycled and cleaned before their implementation in real application of domestic hot water in order to stabilize the PCM content inside the PCM- spheres., The work partially funded by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER), ENE2015-64117-C5-2-R (MINECO/FEDER), and ULLE10-4E-1305). The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREA (2014 SGR 123) and DIOPMA (2014 SGR 1543). The research leading to these results has received funding from the European Union's Seventh Framework Programme (FP7/2007-2013) under grant agreement n° PIRSES-GA-2013-610692 (INNOSTORAGE) and from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 657466 (INPATH-TES). Dr. Camila Barreneche would like to thank Ministerio de Economia y Competitividad de España for Grant Juan de la Cierva, FJCI-2014-22886.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Novel inorganic binary mixture for low‐temperature heat storage applications

  • Galazutdinova, Yana
  • Grágeda, Mario
  • Cabeza, Luisa F.
  • Ushak, Svetlana
In this study, an inorganic mixture based on bischofite (industrial by‐product) was developed and characterized for its application as a phase change material for low‐temperature thermal energy storage. The most appropriate composition was established as 40 wt% bischofite and 60 wt% Mg(NO3)2 · 6H2O. Thermophysical properties were defined and compared with those of the mixture with synthetic MgCl2 · 6H2O. The heat of fusion and melting temperature were measured as 62.0°C and 132.5 kJ kg−1 for the mixture with MgCl2 · 6H2O and 58.2°C and 116.9 kJ kg−1 for the mixture with bischofite. The specific heat capacity values, cycling, and thermal stability for both mixtures were also determined. For the mixture with MgCl2 · 6H2O, the densities of the solid and liquid states were 1517 kg m−3 (ambient temperature) and 1515 kg m−3 (at 60‐70°C), respectively. For the mixture with bischofite, the densities of the solid and liquid states were 1525 kg m−3 (ambient temperature) and 1535 kg m−3 (at 60‐70°C), respectively. Both mixtures show supercooling of about 23.4 and 34.1°C for the mixture with bischofite and MgCl2 · 6H2O, respectively. In addition, it was shown that supercooling may be reduced by increasing the quantity of material tested. Thereby, it was established that an inorganic mixture based on bischofite is a promising PCM for low‐temperature thermal energy storage applications., Funding informationComisión Nacional de InvestigaciónCientífica y Tecnológica, Grant/AwardNumber: CONICYT/FONDAP 15110019,CONICYT‐PCHA/Doctorado Nacional paraEstudiantes Extranjeros 2014/Folio63140052, ERANet‐LAC 2nd Joint Call,ERANET‐LAC 2015‐2016, projectELAC2015/T06‐0988; FONDECYT, Grant/Award Number: 1170675; Spanish Govern-ment, Grant/Award Number: ENE2015‐64117‐C5‐1‐R (MINECO/FEDER); CatalanGovernment, Grant/Award Number: GREA(2014 SGR 123); European CommissionSeventh Framework Programme, Grant/Award Number: PIRSES‐GA‐2013‐610692(INNOSTORAGE); European Union0s Hori-zon, Grant/Award Number: 657466(INPATH‐TES)
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Process integration of thermal energy storage systems – Evaluation methodology and case studies

  • Gibb, Duncan
  • Johnson, Maike
  • Romaní Picas, Joaquim
  • Gasia, Jaume
  • Cabeza, Luisa F.
  • Seitz, Antje
As a key tool for decarbonization, thermal energy storage systems integrated into processes can address issues related to energy efficiency and process flexibility, improve utilization of renewable energy resources and thus reduce greenhouse gas emissions. However, integration of these systems is dominated by the variety of potential processes in which the storage technologies can be deployed as well as the various benefits they deliver. Therefore, the requirements for thermal energy storage systems vary greatly depending on the chosen application, just as the systems themselves have different capabilities depending on their technical principles. This paper addresses this issue by developing a systematic methodology that approaches the challenge of characterizing and evaluating thermal energy storage systems in different applications in three concrete steps. To begin, a set of guidelines for process analysis has been created to disclose process requirements for storage integration. The methodology continues by explicitly defining the system boundary of a thermal energy storage system, as well as addressing technical and economic parameters. Finally, the approach concludes by determining the benefit of an integrated thermal energy storage system to an application and examines how key performance indicators vary based on the perspectives of different stakeholders. Within this work, the methodology is then applied to two case studies of high-temperature storage in concentrating solar power and cogeneration plants. Also introduced are the concepts of retrofit and greenfield applications, which are used to clarify differences between integrated storage systems. The paper shows how such a systematic approach can be used to consistently analyse processes for storage integration, facilitate comparison between thermal energy storage systems integrated into processes across applications and finally grasp how different interests perceive the benefits of the integrated storage system. This type of systematic methodology for technology integration has not been previously developed and as such, is a novel and important contribution to the thermal energy storage community. In the long term, this work builds the basis for a discussion on benefits of thermal energy storage system integration with diverse stakeholders including storage system designers, process owners and policy makers., This work has been partially funded by the German Federal Ministry of Economic Affairs and Energy in the framework of the TESIN project (03ESP011) and the THESAN project (03ET1297). This work has also been partially funded by the Ministerio de Economía y Competitividad de España (ENE2015-64117-C5-1-R (MINECO/FEDER)). The authors at the University of Lleida would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. Jaume Gasia would like to thank the Departament d'Universitats, Recerca i Societat de la Informació de la Generalitat de Catalunya for his research fellowship (2018 FI_B2 00100). The authors are responsible for the content of this publication.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Corrosion Assessment of Myo-Inositol Sugar Alcohol as a Phase Change Material in Storage Systems Connected to Fresnel Solar Plants

  • Maldonado, José Miguel
  • Fernández, Ángel G.
  • Cabeza, Luisa F.
Thermal energy storage systems work in conjunction with solar technologies with the aim of increasing their dispatchability and competitiveness in the energy market. Among others, latent heat thermal energy storage systems have become an appealing research subject and many efforts have therefore been invested in selecting the best phase change material (PCM) to fit the final application. In this study, an extended corrosion characterization was performed for two PCM candidates, solar salt (40 wt.% KNO3/60 wt.% NaNO3) and myo-inositol (C6H12O6), to be applied in Fresnel solar plants. Corrosion rates were determined in aluminium, stainless steel (AISI 304), carbon steel (AISI 1090), and copper by gravimetric tests, gauging the weight loss after 2000 h of immersion at 250 ºC. The corrosion products were characterized by scanning electron microscopy (SEM) and x-ray diffraction (XRD). The corrosion tests carried out with myo-inositol did not show accurate enough results to draw conclusions regarding corrosion on the metals. However, it was observed that this sugar alcohol strongly sticks to the metal specimens, making myo-inositol extremely difficult to manage as an energy storage material. Therefore, the present paper discourages the use of myo-inositol as a PCM beyond its corrosion rate., Funding: The research received funding from Spanish government (MINECO/FEDER), grant number ENE2015-64117-C5-1-R. This work was partially funded by the European Union´s Horizon 2020 Research & Innovation Programme under Grant Agreement 723596 with reference name Innova MicroSolar. José Miguel Maldonado received funding from the Spanish Government for his research fellowship, grant number BES-2016-076554. Ángel G. Fernández has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 712949 (TECNIOspring PLUS) and from the Agency for Business Competitiveness of the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme. Acknowledgments: The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREiA (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Model predictive control strategy applied to different types of building for space heating

  • Gholamibozanjani, Gohar
  • Tarragona Roig, Joan
  • Gracia Cuesta, Alvaro de
  • Fernàndez Camon, César
  • Cabeza, Luisa F.
  • Farid, Mohammed M.
In recent years, the concept of energy-efficient buildings has attracted widespread attention due to growing energy consumption in different types of buildings. The application of thermal energy storage (TES) systems, especially latent heat energy storage (LHES), has become a promising approach to improve thermal efficiency of buildings and hence reduce CO2 emissions. One way to achieve this, could be by implementing a model predictive control (MPC) strategy, using weather and electricity cost predictions. To this end, a heat exchanger unit containing a phase change material (PCM) as a LHES medium, thermally charged by solar energy was incorporated into three versions of a standard building. This paper reports on the use of EnergyPlus software to simulate the heating demand profile of these buildings, with Solving Constraint Integer Programs (SCIP) as the optimization tool. After applying MPC strategy, the energy costs of different building types were evaluated. Furthermore, the effect of prediction horizon and decision time step of MPC strategy, and PCM mass capacity on the performance of the MPC were all investigated in 1 and 7-day simulations. Results showed that by increasing the prediction horizon and PCM mass, more cost saving could be obtained. However, in terms of decision time step, although the study revealed that increasing it led to a higher energy saving, it made the system more sensitive to sharp changes as it failed to provide an accurate reading of the parameters and variables., The study was partially funded by the Spanish Government (ENE2015-64117-C5-1-R (MINECO/FEDER) and ENE2015-64117-C5-3-R (MINECO/FEDER)). The authors at the University of Lleida would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is the certified agent for TECNIO in the category technology developers for the Government of Catalonia. The research leading to these results also received funding from the European Union's Seventh Framework Programme (FP7/2007-2013) under grant agreement no. PIRSES-GA-2013-610692 (INNOSTORAGE).
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

MgSO4·7H2O filled macro cellular foams: An innovative composite sorbent for thermo-chemical energy storage applications for solar buildings

  • Brancato, Vincenza
  • Calabrese, Luigi
  • Palomba, Valeria
  • Frazzica, Andrea
  • Fullana Puig, Margalida
  • Solé, Aran
  • Cabeza, Luisa F.
For seasonal energy storage using solar energy in buildings heating and DHW, thermochemical technology represents the most promising alternative due to the virtually absence of heat losses during storage period. This work focuses on silicone foams, filled by MgSO4·7H2O, as innovative composite sorbents for sorption thermal energy storage applications. The necessity to enclose the salt hydrate in the polymeric foam arises for overcoming the issue of swelling, agglomeration, and/or deliquescence of the salt during its de/hydration process. Indeed, the foam with its flexible structure allows the safe volume expansion during the hydration phase of the salt. The foam samples presented in this paper were obtained by mixing the salt hydrate at various percentages (from 40 wt% up to 70 wt%) with a mixture of two water vapour permeable silicones. The foams were characterized by a complete physicochemical and morphological examination in order to evaluate their actual application in sorption energy storage systems. It was demonstrated that a good link seems to be established between the foam and the salt, and that the de/hydration capacity of the salt is not hindered by the foaming process, storage ability and storage density of the composites are expected to be in line with those of the pure material., The present work has been partially funded by PON “Ricerca e Competitività 2007-13” PON03PE_00206_2 S5 – Smart Small Scale Solar Systems and by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER)). The authors from the University of Lleida would like to thank the Catalan Government for the quality accreditation given to their research group (2014 SGR 123). Aran Solé would like to thank Ministerio de Economía y Competitividad de España for Grant Juan de la Cierva, FJCI-2015-25741.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Experimental validation of the exact analytical solution to the steady periodic heat transfer problem in a PCM layer

  • Mazzeo, Domenico
  • Oliveti, Giuseppe
  • Gracia, Álvaro de
  • Coma Arpón, Julià
  • Solé, Aran
  • Cabeza, Luisa F.
Phase change materials (PCM) are used in many industrial and residential applications for their advantageous characteristic of high capacity of latent thermal storage by means of an isothermal process. In this context, it is very useful to have predictive mathematical models for the analysis of the thermal performance and for the thermal design of these layers. In this work, an experimental validation of an analytical model that resolves the steady periodic heat transfer problem in a finite layer of PCM is presented. The experimental investigation was conducted employing a PCM with thermophysical and thermochemical behavior very close to those hypothesized in the formulation of the analytical model. For the evaluation of the thermophysical properties of the PCM sample used, an experimental procedure created by the authors was employed. In all tests realized in a sinusoidal and non-sinusoidal periodic regime, the comparison between the measured and calculated trends of the temperature at different sample heights and of the surface heat fluxes show an excellent agreement. Moreover, also having verified the analytical total stored energy, the analytical model constitutes a valid instrument for the evaluation of the latent and sensible contribution and the trend in time of the position of the bi-phase interface., The work was partially funded by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER), ENE2015-64117-C5-3-R (MINECO/FEDER), and ULLE10-4E-1305). GREA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2014 SGR 123). This project has received funding from the European Commission Seventh Framework Programme (FP/2007-2013) under Grant agreement Nº PIRSES-GA-2013-610692 (INNOSTORAGE) and from European Union's Horizon 2020 research and innovation programme under grant agreement Nº 657466 (INPATH-TES). Alvaro de Gracia would like to thank Ministerio de Economia y Competitividad de España for Grant Juan de la Cierva, FJCI-2014-19940. Julià Coma would like to thank the Departament d'Universitats, Recerca i Societat de la Informació de la Generalitat de Catalunya for his research fellowship (2016FI_B2 00147). Aran Solé would like to thank Ministerio de Economía y Competitividad de España for Grant Juan de la Cierva, FJCI-2015-25741.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Phase Change Material Selection for Thermal Energy Storage at High Temperature Range between 210 ºC and 270 ºC

  • Maldonado, José Miguel
  • Fullana Puig, Margalida
  • Martín, Marc
  • Solé, Aran
  • Fernández, Ángel G.
  • Gracia Cuesta, Alvaro de
  • Cabeza, Luisa F.
The improvement of thermal energy storage systems implemented in solar technologies increases not only their performance but also their dispatchability and competitiveness in the energy market. Latent heat thermal energy storage systems are one of those storing methods. Therefore, the need of finding the best materials for each application becomes an appealing research subject. The main goal of this paper is to find suitable and economically viable materials able to work as phase change material (PCM) within the temperature range of 210-270 ºC and endure daily loading and unloading processes in a system with Fresnel collector and an organic Rankine cycle (ORC). Twenty-six materials have been tested and characterized in terms of their thermophysical conditions, thermal and cycling stability, and health hazard. Two materials out of the 26 candidates achieved the last stage of the selection process. However, one of the two finalists would require an inert working atmosphere, which would highly increase the cost for the real scale application. This leads to a unique suitable material, solar salt (40 wt % KNO3/60 wt % NaNO3)., This work was partially funded by the European Union’s Horizon 2020 Research & Innovation Programme under Grant Agreement 723596 with reference name Innova MicroSolar. This work was partially funded by the Ministerio de Economía y Competitividad de España (ENE2015-64117-C5-1-R (MINECO/FEDER) and ENE2015-64117-C5-3-R (MINECO/FEDER)). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. José Miguel Maldonado would like to thank the Spanish Government for his research fellowship (BES-2016-076554). Aran Solé would like to thank Ministerio de Economía y Competitividad de España for Grant Juan de la Cierva, FJCI-2015-25741. Alvaro de Gracia has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 712949. Angel G. Fernández would like to acknowledge the financial support provided by GIZ “Programa de pasantía en el extranjero en tecnologías de concentración solar para investigadores” and CONICYT/FONDAP 15110019 “Solar Energy Research Center” SERC-Chile.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Novel geopolymer for use as a sensible storage option in high temperature thermal energy storage systems

  • Jacob, Rhys
  • Trout, Neil
  • Solé, Aran
  • Clarke, Stephen
  • Fernández Renna, Ana Inés
  • Cabeza, Luisa F.
  • Saman, Wasim
  • Bruno, Frank
In the current study a novel geopolymer created from waste materials (namely fly ash and black slag) has been characterised as a potential high temperature thermal energy storage material option. Several geopolymer samples have been fabricated and characterised by X-ray diffraction (XRD) and scanning electron microscopy (SEM). Additionally, the density and heat capacity have been determined. Lastly, the cost of the material and packed bed system was estimated showing that the geopolymer-based systems are potentially 35% cheaper than the traditional 2-tank molten salt systems., This research was performed as part of the Australian Solar Thermal Research Institute (ASTRI), a project supported by the Australian Government, through the Australian Renewable Energy Agency (ARENA). The work was partially funded by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER)). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2014 SGR 123). GREA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. This project has received funding from the European Commission Seventh Framework Programme (FP/2007-2013) under Grant agreement Nº PIRSES-GA-2013-610692 (INNOSTORAGE) and from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 657466 (INPATH-TES). Aran Solé would like to thank Ministerio de Economía y Competitividad de España for Grant Juan de la Cierva, FJCI-2015-25741. The authors would also like to acknowldege the Diopma group from the University of Barcelona thanks the funding by the Spanish Government (RTI2018-093849-B-C32), and the Catalan Government for the quality accreditation (2017 SGR 118).
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Simulation-based optimization of PCM melting temperature to improve the energy performance in buildings

  • Saffari Tabalvandani, Mohammad
  • Gracia Cuesta, Alvaro de
  • Fernàndez Camon, César
  • Cabeza, Luisa F.
Globally, a considerable amount of energy is consumed by the building sector. The building envelope can highly influence the energy consumption in buildings. In this regard, innovative technologies such as thermal energy storage (TES) can help to boost the energy efficiency and to reduce the CO2 emissions in this sector. The use of phase change materials (PCM), due to its high heat capacity, has been the centre of attention of many researchers. A considerable number of papers have been published on the application of PCM as passive system in building envelopes. Researches have shown that choosing the PCM melting temperature in different climate conditions is a key factor to improve the energy performance in buildings. In the present paper, a simulation-based optimization methodology will be presented by coupling EnergyPlus and GenOpt with an innovative enthalpy-temperature (h-T) function to define the optimum PCM peak melting temperature to enhance the cooling, heating, and the annual total heating and cooling energy performance of a residential building in various climate conditions based on Köppen-Geiger classification. Results show that in a cooling dominant climate the best PCM melting temperature to reduce the annual energy consumption is close to the maximum of 26ºC (melting range of 24ºC-28ºC), whereas in heating dominant climates PCM with lower melting temperature of 20ºC (melting range of 18ºC-22ºC) yields higher annual energy benefits. Moreover, it was found that the proper selection of PCM melting temperature in each climate zone can lead to notable energy savings for cooling energy consumption, heating energy consumption, and total annual energy consumption., The work is partially funded by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER) and ENE2015-64117-C5-3-R (MINECO/FEDER)). The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREA (2014 SGR 123). GREA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. This project has received funding from the European Commission Seventh Framework Program (FP/2007-2013) under Grant agreement Nº PIRSES-GA-2013-610692 (INNOSTORAGE) and from the European Union’s Horizon 2020 research and innovation program under grant agreement No 657466 (INPATH-TES). Alvaro de Gracia would like to thank Ministerio de Economia y Competitividad de España for Grant Juan de la Cierva, FJCI-2014-19940.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

TES-PS10 postmortem tests: Carbon steel corrosion performance exposed to molten salts under relevant operation conditions and lessons learnt for commercial scale-up

  • Ruiz-Cabañas, F. Javier
  • Prieto, Cristina
  • Madina, Virginia
  • Fernández Renna, Ana Inés
  • Cabeza, Luisa F.
Postmortem tests were performed over components removed from the TES-PS10 pilot plant after almost four years of continuous operation being exposed to solar salts under representative commercial operation conditions. Accordingly, corrosion performance of plates sections extracted from both storage tanks and samples cut from the hot molten salts pump were evaluated. Corrosion damage extension, oxides layers morphology, and corrosion products chemistry were analyzed by X-ray diffraction, energy dispersive X-ray spectrometry, optical microscopy, and SEM. In addition to materials compatibility with molten salts, mechanical tests were carried out over the storage tanks plates sections. Although the corrosion damage extension over the plates extracted from storage tanks was low and the mechanical properties were according to the standard, some interesting observations were seen. For example, a sample extracted from the hot storage tank and exposed to intermittent contact with molten salts showed some areas characterized by the growth of a non-protective oxide scale. Moreover, localized corrosion with slight penetration through the base material was identified for all storage plates samples under evaluation. On the other hand, the molten salt pump parts under study showed adherent and uniform oxides layers without detecting corrosion–erosion phenomena. Some cavities were found in the discharge elbow, and these imperfections were associated to a bad metallurgical quality during casting. Summarizing, corrosion phenomena suffered by the components under evaluation could be corrected in future plants by applying the lessons learned discussed in this study. As conclusion, materials selection analyzed within this postmortem evaluation is valid from the corrosion point of view to be used in the design of commercial TES systems in PTC plants., The research leading to these results has received funding from Spanish government (Fondo tecnológico IDI-20090393, ConSOLida CENIT 2008-1005). The work is partially funded by the Spanish Government (ENE2011-28269-C03-02, ENE2011-22722, ENE2015-64117-C5-1-R, and ENE2015-64117-C5-2-R). The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREiA (2017 SGR 1537) and research group DIOPMA (2017 SGR 138). GREiA and DIOPMA are certified agents TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Critical analysis of the T-history method: A fundamental approach

  • Badenhorst, Heinrich
  • Cabeza, Luisa F.
Energy storage is a key challenge to a sustainable energy supply. To design new storage systems accurateand representative thermal property measurements are essential. The T-history method is quick anduncomplicated, however numerous adaptations have been proposed over the years. In this study thesemethods have been classified and critically assessed based on their mathematical formulation and exper-imental configuration. They can be broadly categorized according to one of three assumptions regardingthe heat transfer coefficient for natural convection: it is constant either as a function of time or tem-perature, or it is negligible. This work proves in addition that the heat transfer coefficient for naturalconvection, varies both as a function of time and temperature. This is demonstrated both experimentallyand through rigorous simulation of the proposed configurations. Thus T-history methods which show themost promise for precise and unambiguous measurements eliminate convection by making conductionthe dominant thermal resistance in the system. These techniques can be tailored to different materialsand do not require a simultaneous reference due to the use of a rigorous fundamental model comparedto the lumped parameter approximation. The addition of heat flux sensors to quantify actual heat lossesis recommended for absolute measurement certainty., The research leading to these results has received funding from the European Commission Seventh Framework Programme (FP/2007-2013) and under Grant agreement N°PIRSES-GA-2013-610692 (INNOSTORAGE), and from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 657466 (INPATH-TES). The work is partially funded by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER)). Dr. Luisa F. Cabeza would like to thank the Catalan Government for the quality accreditation given to the research group GREA (2014 SGR 123).
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Example of an Innovative Initiative for Education in Thermal Energy Storage: INPATH-TES Project

  • Zsembinszki, Gabriel
  • Cabeza, Luisa F.
Following the EC SET-Plan Education and Training Roadmap, the goal of INPATH-TES is to create a network of academia, research institutes and small and medium-sized enterprises (SMEs) to implement a joint PhD programme on Thermal Energy Storage (TES) technologies. The project consortium consists of 22 partners from academia, industry and SMEs from 14 different countries. The final result of such a network is to educate professionals on these technologies for the European research and industry institutions. Some of the main challenges identified so far consist of the development of the programme, the implementation of the programme in each country/institution, and to ensure the continuity of the programme after EU funding ends., The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2014 SGR 123). GREA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. This study has received funding from European Union’s Horizon 2020 research and innovation programme under grant agreement Nº 657466 (INPATH-TES). The work is partially funded by the Spanish government ENE2015-64117-C5-1-R (MINECO/FEDER).
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

The more the merrier? Number of reviews versus score on TripAdvisor and Booking.com

  • Martín Fuentes, Eva
  • Mateu Piñol, Carles
  • Fernàndez Camon, César
The aim of this research is to confirm whether there is a relationship between the number of reviews and the hotel’s score on Booking.com and TripAdvisor and whether the relationship is different depending on the geographical area. Moreover, the study endeavors to confirm whether the number of reviews influences the score on each website. With the analysis of about 13,899 hotels in 146 cities, our findings suggest that there is some lineal relationship between the amount of reviews and the score on TripAdvisor but not on Booking.com. Moreover, by regions on TripAdvisor hotels from Middle East and Africa and Asia and Pacific have a stronger relationship between reviews and score than those from Europe and America., This work was partially funded by the Spanish Ministry of the Economy, INDUSTRY and Competitiveness [grant number TIN2015-71799-C2-2-P], [grant number ECO2017-88984-R] and [grant number ENE2015-64117-C5-1-R]. This research article has received a grant for its linguistic revision from the Language Institute of the University of Lleida (2016 call).
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Corrosion inhibitors for TES material at high temperature for CSP plants

  • Fernández, Ángel G.
  • Cabeza, Luisa F.
Molten salt technology using nitrate salts as thermal energy storage material is the current state-of-the-art of concentrated solar power technology and power tower central receivers are currently limited by the maximum operating temperature of their working fluid. The limit of solar salt (60wt.%NaNO3 + 40wt.%KNO3) thermal stability is around 565°C with ambient air as the cover gas. In order to obtain higher efficiency goals using molten salt technologies working at higher temperatures (e.g., 650°C to 750°C), a different salt chemistry is required for new generation of CSP plants and chlorides molten salts could be a feasible option. Corrosion mitigation could solve the current issues related with the use of chloride salt at high temperature. In this work, the proposal of different corrosion mitigation strategies has been evaluated, as well as the identification of the most corrosive impurities present in the ternary chloride salt composed by MgCl2/KCl/NaCl (60/20/20 mol%). For this purpose, electrochemical impedance spectroscopy tests were carried out at 700°C on austenitic stainless steel (AISI 304) and a Ni base alloy (Inconel 702) during 100 hours. In this case, MgOHCl was identified as the main important corrosive impurity, present in the chloride salt, to control in the storage system. Regarding the materials tested, Ni base alloy (Inconel 702) showed the most promising results for their use as container material., The research leading to these results has received funding from Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER)). The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREiA (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. Angel G. Fernández wants to acknowledge the financial support from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant No 712949 (TECNIOspring PLUS) and from the Agency for Business Competitiveness of the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Household appliances penetration and ownership trends in residential buildings

  • Cabeza, Luisa F.
  • Ürge-Vorsatz, Diana
  • Ürge, Daniel
  • Palacios, Anabel
  • Barreneche Güerisoli, Camila
Understanding the development of the trends in the ownership of different appliances in a historic context in various countries of the world can not only provide important insights for understanding the dynamics of adoption of different appliances, but can also help with foresight: how the future may develop for these or other, new appliances on the market. Although available literature in household appliances energy consumption, energy management and energy efficiency has seen some advances, there is a clear lack in the literature on household appliance ownership. In this paper, historic data is gathered and analysed for several groups of appliance types (white appliances, brown appliances and small appliances) for 12 countries representing four continents, when available since 1970 to date. Countries representing different parts of the world were selected to present an overview on household appliances ownership and energy consumption. One of the first conclusions of the study is that there is little or no information in many countries from South America, Africa or South Asia. Refrigerators, freezers and washing machines ownership are an example of most other white goods. Brown goods appeared in the market at very different time, depending on each one (from the 70s to the late 90s) and their ownership growth is much higher than for the previous ones. Most of small line appliances ownership has not reached saturation yet., The work is partially funded by the Spanish government (ENE2015–64117-C5-1-R (MINECO/FEDER)). The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREA and DIOPMA (2014 SGR 123 and 2014 SGR 1543, respectively). GREA and DIOPMA are certified agents TECNIO in the category of technology developers from the Government of Catalonia. Dr. Camila Barreneche would like to thank Ministerio de Economia y Competitividad de España for grant Juan de la Cierva, FJCI-2014–22886.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Enhancing the insertion of NOP instructions to obfuscate malware via deep reinforcement learning

  • Gibert Llauradó, Daniel
  • Fredrikson, Matt
  • Mateu Piñol, Carles
  • Planes Cid, Jordi
Current state-of-the-art research for tackling the problem of malware detection and classification is centered on the design, implementation and deployment of systems powered by machine learning because of its ability to generalize to never-before-seen malware families and polymorphic mutations. However, it has been shown that machine learning models, in partidular deep neural networks, lack robustness against crafted inputs (adversarial examples). In this work, we have investigated the vulnerability of a state-of-the-art shallow convolutional neural network malware classifier against the deat code insertion technique. We propose a general framework powered by a Double Q-network to induce misclassification over malware families. The framework trains an agent through a convolutional neural network to select the optimal positions in a code sequence to insert dead code instructions so that the machine learning classifier mislabels the resulting executable. The experiments show that the proposed method significantly drops the classification accuracy of the classifier to 56.53% while having an evasion rate of 100% for the samples belonging to Kelihos_ver3, Simda, and Kelihos_ver1 families. In addition, the average number of instructions needed to mislabel malware in comparison to a random agent decreased by 33%., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 847402. This research has been partially funded by the Spanish MICINN Projects TIN2015-71799-C2-2-P, ENE2015-64117-C5-1-R, PID2019-111544GB-C22, and supported by the University of Lleida.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Use of partial load operating conditions for latent thermal energy storage management

  • Gasia, Jaume
  • Gracia Cuesta, Alvaro de
  • Peiró Bell-lloch, Gerard
  • Arena, Simone
  • Cau, Giorgio
  • Cabeza, Luisa F.
A proper management of thermal energy storage (TES) charging and discharging processes allows the final users to optimize the performance of TES systems. In this paper, an experimental research is carried out to study how the percentage of charge in a latent heat TES system (partial load operating conditions) influences the discharge process. Several charging and discharging processes were performed at a constant heat transfer fluid (HTF) mass flow rate of 0.5 kg/s and temperature of 155 °C and 105 °C, respectively. High density polyethylene (HDPE) with a total mass of 99.5 kg was used as phase change material (PCM) in a 0.154m3 storage tank based on the shelland-tube heat exchanger concept. Five different percentages of charge have been studied: 58 %, 73 %, 83 %, 92 %, and 97 % (baseline test). Results showed that by modifying the percentage of charge, the time required for the charging process was reduced between 97.2% and 68.8% in comparison to the baseline case. However, the energy accumulated was only reduced a maximum of 35.1% and a minimum of 5.2%, while the heat transfer rates during the first 60 min of discharge were reduced a maximum of 45.8% and a minimum of 6%. Therefore, partially charging the TES system not lower than 85% of its maximum energy capacity becomes a good option if the final application accepts a maximum decrease of discharging heat transfer rates of 10% if compared to the fully charged system., The work was partially funded by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER), ENE2015-64117-C5-3-R (MINECO/FEDER), and ULLE10-4E-1305). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2014 SGR 123). GREA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. This project has received funding from the European Commission Seventh Framework Programme (FP/2007-2013) under Grant agreement No. PIRSES-GA-2013-610692 (INNOSTORAGE) and from the European Union’s Horizon 2020 research and innovation programme under grant agreement No. 657466 (INPATH-TES). Jaume Gasia would like to thank the Departament d'Universitats, Recerca i Societat de la Informació de la Generalitat de Catalunya for his research fellowship (2017 FI_B1 00092). Alvaro de Gracia would like to thank Ministerio de Economia y Competitividad de España for Grant Juan de la Cierva, FJCI-2014-19940. Simone Arena would like to thank the Department of Mechanical, Chemical and Materials Engineering of the University of Cagliari for funding his research grant.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Thermal characterization of different substrates under dried conditions for extensive green roofs

  • Coma Arpón, Julià
  • Gracia Cuesta, Alvaro de
  • Chàfer, Marta
  • Pérez Luque, Gabriel
  • Cabeza, Luisa F.
Extensive green roofs have been consolidated as good tools for passive energy saving systems in buildings,providing a more sustainable trend in the building field. However, as the growth of vegetation is variable depending on external factors such as weather conditions, disease, etc. the coverage of plants cannot ensure uniformity and consequently the 'shadow effect' cannot be considered as a constant parameter.On the other hand, materials used in substrate and drainage layers should provide a constant 'insulation effect' depending only on their physical properties and water content. In spite of this, the complexity of disaggregated materials used in internal layers of extensive green roofs implies a lack of real data about their thermal properties. The main objective of this study is to determine experimentally the physical properties of different disaggregated materials from the internal layers of extensive green roofs commonly used in Mediterranean climates. The experimentation presented in this paper allows to calculate the thermal transmittance in steady-state (U-value), the heat storage capacity (Cp), and the dynamic thermal response under a daily thermal oscillation., This work was partially funded by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER) and ULLE10-4E-1305), in collaboration with the company Buresinnova S.A (C/Roc Boronat 117-125, baixos 08018 Barcelona). Moreover, the research leading to these results has received funding from the European Union's Seventh Framework Programme (FP7/2007-2013) under grant agreement n° PIRSES-GA-2013-610692 (INNOSTORAGE) and from European Union’s Horizon 2020 research and innovation programme under grant agreement N° 657466 (INPATH-TES). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2014 SGR 123). Alvaro de Gracia would like to thank Ministerio de Economia y Competitividad de España for Grant Juan de la Cierva, FJCI-2014-19940. Finally, Julià Coma wants to thank the Departament d'Universitats, Recerca i Societat de la Informació de la Generalitat de;1; Catalunya for his research fellowship.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Fatty acid eutectic mixtures and derivatives from non-edible animal fat as phase change materials

  • Gallart-Sirvent, Pau
  • Martín, Marc
  • Villorbina Noguera, Gemma
  • Balcells Fluvià, Mercè
  • Solé, Aran
  • Barreneche Güerisoli, Camila
  • Cabeza, Luisa F.
  • Canela i Garayoa, Ramon
A set of compounds from non-edible fat waste was prepared and their thermal behavior was studied. The fat was hydrolyzed and crystallized in a simple and robust process to yield palmitic acid-stearic acid (PA-SA) mixtures. The PA-SA mass ratios determined by GC-FID (gas chromatography-flame ionization detection) were similar to those reported for eutectic mixtures of PCMs (phase change materials). DSC (differential scanning calorimetry) results indicated that the melting and solidification temperatures were around 55 °C and 52 °C and the latent heat of the crystallized fractions measured was around 180 kJ kg−1. The thermal cycling reliability of the eutectic mixtures was also tested during 1000 melting/freezing cycles. The loss in melting and solidification enthalpies was below 14% in all mixtures showing a promising behavior for PCM applications. Additionally, the unsaturated fatty acids were recovered and transformed to threo-9,10-dihydroxystearic acid (DHSA) and some of their inorganic salts, which were analyzed by FT-IR (Fourier transform-infrared spectroscopy) and tested for the first time using the DSC technique., GREA and DBA are certified agents TECNIO in the category of technology developers from the Government of Catalonia. We thanks to Subproductos Cárnicos Echevarria y Asociados S.L (Cervera, Spain) for supplying the non-edible fat. Moreover, the research leading to these results has received funding from the European Commission Seventh Framework Programme (FP/2007–2013) under grant agreement no. PIRSES-GA-2013-610692 (INNOSTORAGE) and from the European Union's Horizon 2020 research and innovation program under grant agreement no. 657466 (INPATH-TES). The authors would like to thank the Catalan Government for the quality accreditation given to their research groups GREA (2014 SGR 123), Agricultural Biotechnology Research Group (2014 SGR 1296) and DIOPMA (2014 SGR 1543). This work has been partially funded by the Spanish government (CTQ2015-70982-C3-1-R (MINECO/FEDER), ENE2015-64117-C5-1-R (MINECO/FEDER) and ENE2015-64117-C5-2-R (MINECO/FEDER)). Dr Camila Barreneche would like to thank Ministerio de Economia y Competitividad de España for her grant Juan de la Cierva FJCI-2014-22886. Aran Solé would like to thank Ministerio de Economía y Competitividad de España for Grant Juan de la Cierva, FJCI-2015-25741.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Phenomenological modelling of phase transitions with hysteresis in solid/liquid PCM

  • Barz, Tilman
  • Emhofer, Johann
  • Marx, Klemens
  • Zsembinszki, Gabriel
  • Cabeza, Luisa F.
Technical-grade and mixed solid/liquid phase change materials (PCM) typically melt and solidify over a temperature range, sometimes exhibiting thermal hysteresis. Three phenomenological phase transition models are presented which are directly parametrized using data from complete melting and solidification experiments. They predict hysteresis phenomena and are used to calculate effective PCM properties. Two models have already been implemented in commercial building simulation and/or multiphysics software, but not the third novel model. Applications are presented for two commercial PCM: a paraffin, and a salt water mixture with additives. Numerical implementation aspects are discussed, and significant differences in the predicted absorbed and released heat are highlighted when simulating consecutive incomplete phase transitions. The models are linked with energy balance equations to predict recorded PCM temperatures of a thermal energy storage. The cross-validation with data from 26 partial load conditions clearly indicate a superior predictive performance of the novel hysteresis model., The authors thank Birgo Nitsch, Vladimir Parfenov and Andreas Strehlow (AKG Verwaltungsgesellschaft mbH) for fruitful discussion and support in the modelling of the heat transfer in the compact plate fin heat exchanger. The authors would like to thank the Catalan Government for the quality accreditation given to their research group (GREiA 2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. This project has received funding from the European Union’s Horizon 2020 research and innovation programme [grant number 768824] (HYBUILD) and from the Ministerio de Economía y Competitividad de España (ENE2015- 64117-C5-1-R (MINECO/FEDER)).
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Benchmarking of energy demand of domestic and small business buildings

  • Coma Arpón, Julià
  • Maldonado, José Miguel
  • Gracia Cuesta, Alvaro de
  • Gimbernat, Toni
  • Botargues, Teresa
  • Cabeza, Luisa F.
Rapid expansion of solar thermal energy for increasing energy efficiency of buildings has been adopted in short/medium and long-term energy strategies of EU countries. This enhancement of energy efficiency in buildings is in line with regional actions with the European climate energy objectives as defined in the European Union’s “20-20-20” targets and in the European Commission’s Energy Roadmap 2050. Within this context, the overall objective of this work is to develop an innovative high performance and cost effective hybrid solar heat and power system, which consist in a novel flat Fresnel mirror solar concentrating collector and micro organic Rankine cycle plant combined with advanced phase change materials as thermal storage, all system managed by smart control units. The initial application is to be implemented in individual dwellings and small business residential buildings for on-site electricity and heat generation using solar thermal energy. It is estimated that the proposed technology will deliver 60% of domestic energy requirements and provide 20% reduction in energy costs and greenhouse gas emissions compared to the best existing low carbon energy technologies. To reach the main objectives, the first step consist in providing information on features of architecture of domestic and small business residential buildings and their annual energy demands for different countries such as: Spain, France Germany, Italy, and United Kingdom. This will include detailed building information of envelopes (walls, roof, lofts, etc.), structure, fabric, and results of energy demands (domestic hot water, space heating and electricity) for the abovementioned countries. This information will be used as input data during the development of this technology as it will point out the potential benefits of the system in different countries, climates, and building typologies., This study has received funding from European Union’s Horizon 2020 research and innovation programme under grant agreement Nº723596 (Innova MicroSolar) and Nº 657466 (INPATH-TES), from the European Commission Seventh Framework Programme (FP/2007-2013) under grant agreement Nº PIRSES-GA-2013-610692 (INNOSTORAGE). The work is partially funded by the Spanish government ENE2015- 64117-C5-1-R (MINECO/FEDER), ENE2015-64117-C5-3-R (MINECO/FEDER) and (ULLE10-4E-1305). GREA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2014 SGR 123). Alvaro de Gracia would like to thank Ministerio de Economia y Competitividad de España for Grant Juan de la Cierva, FJCI-2014-19940.
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Comparative analysis of energy demand and CO2 emissions of residential buildings, Benchmarking of energy demand and CO2 emissions of domestic residential buildings

  • Coma Arpón, Julià
  • Maldonado, José Miguel
  • Gracia Cuesta, Alvaro de
  • Gimbernat, Toni
  • Botargues, Teresa
  • Cabeza, Luisa F.
Rapid expansion of solar thermal energy for increasing energy efficiency of buildings has been adopted in short/medium and long-term energy strategies of EU countries. Within this context, the overall objective of this work is to develop an innovative high performance and cost effective hybrid solar heat and power system. The initial application is to be implemented in individual dwellings and small business residential buildings for onsite electricity and heat generation using solar thermal energy. It is estimated that the proposed technology will deliver 60% of domestic energy requirements and provide 20% reduction in energy costs and greenhouse gas emissions compared to the best existing low carbon energy technologies. The aim of this study consists in performing a comparative analysis of the different building typologies, which can host this technology, and their energy demands for heating and domestic hot water, as well as their CO2 emissions., This study has received funding from Eurepean Union's Horizon 2020 research and innovation programme under grant agreement Nº 723596 (Innova MicroSolar) and Nº 657466 (INPATH-TES). The work is partially funded by the Sapnish government ENE2015-64117-C5-1-R (MINECO/FEDER) and ENE2015-64117-C5-3-R (MINECO/FEDER). GREA is certified agent TECNIO in the cathegory of technology developers from the Government of Catalonia. The authors would like to thanks the Calatan Governmnet for the quality accreditation given to their research group (2014 SGR 123). Alvaro de Gracia would like to thanks Ministerio de Economia y Competitividad de España for Grant Juan de la Cierva, FJCI-2014-19940.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Effect of PCM on the Hydration Process of Cement-Based Mixtures: A Novel Thermo-Mechanical Investigation

  • Fabiani, Claudia
  • Pisello, Anna Laura
  • D'Alessandro, Antonella
  • Ubertini, Filippo
  • Cabeza, Luisa F.
  • Cotana, Franco
The use of Phase Change Material (PCM) for improving building indoor thermal comfort and energy saving has been largely investigated in the literature in recent years, thus confirming PCM's capability to reduce indoor thermal fluctuation in both summer and winter conditions, according to their melting temperature and operation boundaries. Further to that, the present paper aims at investigating an innovative use of PCM for absorbing heat released by cement during its curing process, which typically contributes to micro-cracking of massive concrete elements, therefore compromising their mechanical performance during their service life. The experiments carried out in this work showed how PCM, even in small quantities (i.e., up to 1% in weight of cement) plays a non-negligible benefit in reducing differential thermal increases between core and surface and therefore mechanical stresses originating from differential thermal expansion, as demonstrated by thermal monitoring of cement-based cubes. Both PCM types analyzed in the study (with melting temperatures at 18 and 25 ºC) were properly dispersed in the mix and were shown to be able to reduce the internal temperature of the cement paste by several degrees, i.e., around 5 ºC. Additionally, such small amount of PCM produced a reduction of the final density of the composite and an increase of the characteristic compressive strength with respect to the plain recipe., Funding: The research leading to these results has received funding from the European Union’s Horizon 2020 research and innovation program under Grant agreement No. 657466 (INPATH-TES) and No. 765057 (SaferUp!). The authors also thank the Microtek Laboratories, Inc. for providing the capsulated materials. The work is also partially funded by the Spanish government (ENE2015-64117-C5-1-R). Acknowledgments: Acknowledgments are due to the “CIRIAF program for UNESCO” in the framework of the UNESCO Chair “Water Resources Management and Culture”. Luisa F. Cabeza would like to thank the Catalan Government for the quality accreditation given to her research group (2017 SGR 1537).
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Benchmarking of energy demand of residential buildings

  • Coma Arpón, Julià
  • Maldonado, José Miguel
  • Gracia Cuesta, Alvaro de
  • Gimbernat, Toni
  • Botargues, Teresa
  • Cabeza, Luisa F.
Solar thermal energy has been adopted in medium and long‐term energy strategies within EU countries for increasing the energy efficiency of buildings. In this context, the overall objective of this project consists in developing an innovative high performance and cost effective hybrid system (solar heat and electrical power). The initial application is to be implemented in residential buildings for on‐site electricity and heat generation using solar thermal energy. The proposed technology is expected to deliver 60% of domestic energy requirements (heating and domestic hot water) and provide 20% reduction in energy costs and greenhouse gas emissions compared to the best existing low carbon energy technologies. A benchmark on the energy demand for the different types of residential buildings in Europe serves as reference scenario to evaluate the potential applicability of the different existing renewable technologies and to establish a comparative framework in terms of quantitative values. Thus, the specific aim of this study consists in performing a state‐of‐the‐art on the different building typologies, which can host this technology, and their energy demands for heating and domestic hot water, as well as their associated CO2 emissions., This study has received funding from European Union’s Horizon 2020 research and innovation programme under grant agreement Nº723596 (Innova MicroSolar) and Nº 657466 (INPATH‐TES). The work is partially funded by the Spanish government ENE2015‐64117‐ C5‐1‐R (MINECO/FEDER) and ENE2015‐64117‐C5‐3‐R (MINECO/FEDER). GREA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2014 SGR 123). Alvaro de Gracia would like to thank Ministerio de Economía y Competitividad de España for Grant Juan de la Cierva, FJCI‐2014‐19940.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Evaluation of energy density as performance indicator for thermal energy storage at material and system levels

  • Romaní Picas, Joaquim
  • Gasia, Jaume
  • Solé, Aran
  • Takasu, Hiroki
  • Kato, Yukitaka
  • Cabeza, Luisa F.
The increase of the capacity factor of thermal processes which use renewable energies is closely linked to the implementation of thermal energy storage (TES) systems. Currently, TES systems can be classified depending on the technology for storing thermal: sensible heat, latent heat, and sorption and chemical reactions (usually known as thermochemical energy storage). However, there is no standardized procedure for the evaluation of such technologies, and therefore the development of performance indicators which suit the requisites of the final users becomes an important goal. In the present paper, the authors identified the energy density as an important performance indicator for TES, and evaluated it at both material and system levels. This approach is afterwards applied to prototypes covering the three TES technologies: a two-tank molten salts sensible storage system, a shell-and-tube latent heat storage system, and a magnesium oxide and water chemical storage system. The evaluation of the energy density highlighted the difference of its value at the material value, which presents a theoretical maximum, and the results at system level, which considers all the parts required for operating the TES, and thus presents a significantly lower value. Moreover, the proposed approach captured the effect of the complexity and overall size of the system, showing the relevance of this performance indicator for evaluating technologies for applications in which volume is a limiting parameter., The work was partially funded by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER)). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. Jaume Gasia would like to thank the Departament d'Universitats, Recerca i Societat de la Informació de la Generalitat de Catalunya for his research fellowship (2018 FI_B2 00100). Aran Solé would like to thank Ministerio de Economía y Competitividad de España for Grant Juan de la Cierva, FJCI2015-25741. The authors would also like to thank the participants of IEA ECES Annex 30 for their critical view and feedback during the development of the methodology.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Economic and environmental potential for solar assisted central heating plants in the EU residential sector: Contribution to the 2030 climate and energy EU agenda

  • Tulus, Victor
  • Abokersh, Mohamed Hany
  • Cabeza, Luisa F.
  • Vallès Rasquera, J. Manel
  • Jiménez, Laureano
  • Boer, Dieter
Aligning with the ambitious EU 2030 climate and energy package for cutting the greenhouse emissions and replacing conventional heat sources through the presence of renewable energy share inside efficient district heating fields, central solar heating plants coupled with seasonal storage (CSHPSS) can have a viable contribution to this goal. However, the technical performance variation combined with inadequate financial assessment and insufficient environmental impact data associated with the deployment of those innovative district heating systems represents a big challenge for the broad implementation of CSHPSS in Europe. In this context, our paper presents a comprehensive evaluation for the possibility of integrating CSHPSS in the residential sector in various EU member states through the formulation of a multi-objective optimization framework. This framework comprises the life cycle cost analysis for the economic evaluation and the life cycle assessment for the environmental impact estimation simultaneously. The technical performance is also considered by satisfying both the space heating demand and the domestic hot water services. The methodological framework is applied to a residential neighborhood community of 1120 apartments in various EU climate zones with Madrid, Athens, Berlin, and Helsinki acting as a proxy for the Mediterranean continental, Mediterranean, central European, and Nordic climates, respectively. The optimization results regarding the energy performance show that the CSHPSS can achieve a renewable energy fraction above 90% for the investigated climate zones. At the same time, the environmental assessment shows significant improvement when using the CSHPSS in comparison to a natural gas heating system, in those cases the environmental impact is reduced up to 82.1-86.5%. On the other hand, substantial economic improvement is limited, especially in the Mediterranean climate zone (Athens) due to low heating demands and the prices of the non-renewable resources. There the total economic cost of the CSHPSS plants can increase up to 50.8% compared to a natural gas heating system. However, considering the incremental tendency in natural gas prices all over EU nowadays, the study of future plant costs confirms its favorable longterm economic feasibility., The authors would like to acknowledge financial support from the Spanish Ministry of Economy and Competitiveness (ENE2015-64117-C5-1-R (MINECO/FEDER), ENE2015-64117-C5-3-R (MINECO/FEDER) and CTQ2016-77968 (MINECO/FEDER)) and Martí i Franquès COFUND Fellowship program. This project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 713679. The authors at the University of Lleida would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Steam-PCM heat exchanger design and materials optimization by using Cr-Mo alloys

  • Ruiz-Cabañas, F. Javier
  • Prieto, Cristina
  • Jové, Aleix
  • Madina, Virginia
  • Fernández Renna, Ana Inés
  • Cabeza, Luisa F.
A387 Gr 91 Cr-Mo alloy corrosion compatibility with LiOH-KOH mixture was evaluated at 315 °C (Test#1) and 360 °C (Test#2). This alloy is studied for a techno-economical optimization of a steam-PCM heat exchanger proposed in the thermal energy storage (TES) system of a direct steam generation (DSG) facility. The corrosion damage was analyzed with visual inspection, optical microscopy, SEM, EDS and XRD, and corrosion rates were also calculated. A387 Gr 91 alloy generates protective oxide layers over base metal. Localized corrosion damages were not detected with these test conditions, while XRD and EDS profiles showed CrO and LiFeO2 as main corrosion products generated by this alloy. On the other hand, corrosion rates decrease with exposure time showing the passivation of the alloy. A387 Gr 91 corrosion performance was compared with A316L stainless steel, which was preliminary proposed by the authors in previous studies. In addition to corrosion performance, parameters such as cost, thermal properties, and mechanical properties are discussed. In conclusion, the use of A387 Gr 91 instead to A316L alloy for the construction of the steam-PCM heat exchanger involves the technoeconomical optimization of the equipment., The research leading to these results has received funding from CDTI in the project Innterconecta Thesto (ITC-20111050). The work is partially funded by the Spanish government (ENE2015-64117-C5-1-R, and ENE2015-64117-C5-2-R). The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREA (2014 SGR 123) and research group DIOPMA (2014 SGR 1543). The research leading to these results has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No 657466 (INPATH-TES).
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Does verifying users influence rankings? Analyzing TripAdvisor and Booking.com

  • Martín Fuentes, Eva
  • Mateu Piñol, Carles
  • Fernàndez Camon, César
Electronic word of mouth (eWOM) is of recent and considerable importance in tourism, particularly because of the intangible nature of this industry. Users' online reviews are a source of information for other consumers, who take them into account before making a reservation at a lodging property. The aim of this study is to establish whether or not the anonymity of the reviews on TripAdvisor alters hotel rankings by comparing them with verified users' reviews on Booking.com. Moreover, the study analyzes whether or not the differences in the rating scales of both websites favor some hotels over others. Big data is used in this study, with more than 40,000 hotels on Booking.com and 70,000 on TripAdvisor in 447 cities around the world, and compares the rankings of about 20,000 hotels matched on both websites. Our findings suggest that the behavior of both rankings is similar and the lack of veracity on TripAdvisor due to the anonymity in the user's verification system is baseless. In addition, some differences are found depending on the hotel category and region, due mainly to the unique rating scale on Booking.com (from 2.5 to 10), as compared to the rating scale on TripAdvisor (from 1 to 5)., This work was partially funded by the Spanish Ministry of the Economy and Competitiveness: research project TIN2015-71799-C2-2-P and ENE2015-64117-C5-1-R. This research article has received a grant for its linguistic revision from the Language Institute of the University of Lleida (2016 call).
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Control concepts of a radiant wall working as thermal energy storage for peak load shifting of a heat pump coupled to a PV array

  • Romaní Picas, Joaquim
  • Belusko, Martin
  • Alemu, Alemu
  • Cabeza, Luisa F.
  • Gracia Cuesta, Alvaro de
  • Bruno, Frank
Photovoltaic panels (PV) coupled to a heat pump supplying heat to a radiant wall is a system with potential to reduce the imported energy from the grid for heating and cooling of buildings. The radiant wall works as a thermal storage system (TES) allowing storage of the PV output and, thus, peak load shifting. However, the management of these technologies is complex due to the dynamics of the system. This paper presents several control concepts with different purposes such as shifting energy use to off-peak periods, maximizing self-consumption of PV output, and minimization of imported energy from the grid. An experimentally validated numerical model from previous research was used to investigate and compare the different proposed control concepts. Results showed that charging the wall with solar energy resulted in higher overall energy use of the heat pump, while the imported grid energy was significantly reduced, thanks to self-consumption., The authors acknowledge the South Australian Department of State Development who have funded this research through the Premier's Research Industry Fund - International Research Grant Program (IRGP 33). The work was partially funded by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER), ENE2015-64117-C5-3-R (MINECO/FEDER), and ULLE10-4E-1305). GREA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2014 SGR 123) and the city hall of Puigverd de Lleida. This projects has received funding from the European Commission Seventh Framework Programme (FP/2007–2013) under Grant agreement Nº PIRSES-GA-2013-610692 (INNOSTORAGE) and from European Union's Horizon 2020 research and innovation programme under grant agreement Nº 657466 (INPATH-TES). Alvaro de Gracia would like to thank Ministerio de Economia y Competitividad de España for Grant Juan de la Cierva, FJCI-2014-19940.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Assessing the Potentiality of Animal Fat Based-Bio Phase Change Materials (PCM) for Building Applications: An Innovative Multipurpose Thermal Investigation

  • Fabiani, Claudia
  • Pisello, Anna Laura
  • Barbanera, Marco
  • Cabeza, Luisa F.
  • Cotana, Franco
In recent years, the implementation of novel solutions aimed at improving thermal energy storage (TES) capability to both energy technologies and building-integrated systems has gained increasing attention. In particular, the application of phase change materials (PCM) is currently gathering worldwide acknowledgment. In this work, the potential of animal fat as a novel bio-based PCM having transition temperature around the ambient temperature is assessed by means of thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and extensive temperature monitoring. Results from the TGA showed the differential degradation of the main components of the animal fat during the heating phase, where three different decomposition steps could be noticed. The thermal monitoring and the DSC analysis demonstrated the promising thermal performance of the material, which showed an interesting double transition range globally associated to a melting enthalpy of about 28.94 kJ kg􀀀1. The obtained results demonstrate the promising thermophysical properties of the animal fat blend, which can be considered as a low-cost, biocompatible PCM, particularly with potential application in passive building envelope applications for a wide range of temperature boundary conditions., Funding The work partially funded by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER)). Acknowledgments Cabeza would like to thank the Catalan Government for the quality accreditation given to her research group (2017 SGR 1537). GREA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. Authors from University of Perugia thank Fondazione cassa di Risparmio di Perugia for supporting the investigation about biomaterials within the project SOS CITTÁ 2018.0499.026.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Evaluation of the development of five Sedum species on extensive green roofs in a continental Mediterranean climate

  • Pérez Luque, Gabriel
  • Chocarro, Cristina
  • Juárez Escario, Alejandro
  • Coma Arpón, Julià
Because of their easy implementation and low maintenance, extensive green roofs have become established during the last few decades as one of the best options for integrating vegetation on the built environment. The success of these systems involves having of a plant species palette well adapted to extreme conditions, especially in drought environments. Among the available ones, the Sedum genus has stood out due to its tolerance to climate extreme conditions and its use has been widespread throughout the world. In previous research, efforts have been mainly concentrated on selecting the most drought tolerant Sedum species, without considering other important parameters for the suitable provision of ecosystem services from the green roof, such as coverage capacity, shape and structure or growth strategy, among others. In this study, five species of Sedum (Sedum album, S. sediforme, S. sexangulare, Sedum spurium cf. öCoccineum’ (syn. Phedimus spurius cf. öCoccineum’) and Sedum spurium cf. öSummer Glory’ (syn. Phedimus spurius cf. öSummer Glory’) were tested in a dry continental Mediterranean climate with the aim of observing their patterns of growth and development. Results revealed that Sedum album, S. sediforme, S. sexangulare are recommended species for their use on extensive green roofs in this climate, whereas both varieties of S. spurium, particularly var. “Coccineum”, present some limitations for their use, basically due to their shape, plant structure, pigmentation and lack of adaptation to winter conditions. Shape Index could be an adequate tool for decision-making in the selection of plant species in the design of green roofs because it provides information not only about the shape and size but also related to the growth strategy of these plants., This work is partially funded by the Spanish government <GN1>ENE2015-64117-C5-1-R</GN1>(MINECO/FEDER). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is a certified TECNIO agent in the category of technology developers by the Government of Catalonia. Julià Coma would like to thank the Ministerio de Economia y Competitividad de Españafor the Juan de la Cierva Grant, FJCI-2016-30345.
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Innovative concentrated solar micro organic Rankine cycle plant system for residential buildings

  • Maldonado, José Miguel
  • Gracia Cuesta, Alvaro de
  • Mahkamov, Khamid
  • Costa, Carolina
  • Kenisarin, Murat
  • Pili, Piero
  • Manca, Roberto
  • Leroux, Arthur
  • Mintsa, André Charles
  • Bartolini, Carlo M.
  • Pirro, Matteo
  • Lynn, Kevin
  • Mullen, David
  • Halimic, Elvedin
  • Cioccolanti, Luca
  • Arteconi, Alessia
  • Gimbernat, Toni
  • Botargues, Teresa
  • Cabeza, Luisa F.
Reducing the energy consumption in the building sector, as well as its associated CO2 emissions, is one of the main environmental concerns at worldwide level. In developed countries, the building sector means 41% of the total energy consumption and 40% of the total greenhouse gases emissions. To improve the energy efficiency of residential buildings, several energy strategies were carried out in European countries to encourage the development of active energy saving systems; such as the solar thermal energy. The presented study is in the frame of the Innova MicroSolar European project, which is sponsored by the European Union’s Horizon 2020 research and innovation programme. The main goal of this project is to develop an innovative concentrated solar heat and power system for residential buildings, which supplies 2-kWelec and 18-kWth. This technology includes a concentrated solar system, a high performance micro organic Rankine cycle (ORC) turbine, and an enhanced latent heat thermal energy storage (LHTES). The solar system is based on linear Fresnel mirrors which are considerably easier and cheaper to manufacture than their parabolic equals. Also, the mirrors are led by a sun tracking mechanism so they are always focusing the absorber tubes, heating up to 295ºC the heat transfer fluid (HTF) flow. The total area of the real scale prototype solar field is 140 square metres, which could provide from 80 to 15 kWth. The micro ORC technology is equipped with a high speed permanent magnet AC alternator able to supply 2.3 kWel. The ORC block has to be fed with 22 kWth. Finally, the TES tank consists of two main blocks, the PCM tank and the enhanced heat sink. Both blocks are connected between them by reversible heat pipes as heat carrier. The storage is designed to supply 25 kWth during four working hours. The whole system will supply 60% of the total building energy demand, reducing the energy cost up to 20%, as well as the greenhouse gases emissions when comparing against the best renewable energy technologies available on the market. This study shows the first experiments of the whole systems. The HTF (Therminol 62) is heated up to 270ºC with the solar field, then the HTF is lead to the ORC evaporator and the organic fluid (cyclopenthane) evaporates and runs the turbine. The TES tank is charged when the solar field reaches maximum power levels. Once the solar production cannot run the ORC, the solar field is bypassed and the TES tank successfully becomes the main energy supplier., The research leading to these results has received funding from the European Union´s Horizon 2020 Research & Innovation Programme under Grant Agreement 723596 with reference name Innova MicroSolar. This work was partially funded by Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER)). José Miguel Maldonado would like to thank the Spanish Government for his research fellowship (BES-2016-076554). Alvaro de Gracia has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 712949 (TECNIOspring PLUS) and from the Agency for Business Competitiveness of the Government of Catalonia. The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREiA (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Geometry optimization of a heat storage system for concentrated solar power plants (CSP)

  • Solé, Aran
  • Falcoz, Quentin
  • Cabeza, Luisa F.
  • Neveu, Pierre
In the present study, geometry optimization of a phase change material (PCM) heat storage system is presented. The existing PCM-fins heat exchanger system works at the back side of a solar receiver in order to minimize the effect of the solar radiation fluctuations inside the cavity. As initially designed, the system does not accomplish the expected design purposes and thus optimization is needed. Optimization is usually time-consuming and some algorithms need a starting point, therefore one suitable method is geometrical optimization which aims to find the optimal shape of a system for a given criteria and providing a rough optimal geometry. Here, constructal theory, 'point to volume', is applied to find the optimum shape factor of the elemental volume of the presented PCM-heat exchanger. With this methodology, an optimum ratio of the PCM and fin width and length is found and beyond that the method is extended to 'surface to volume' problem. Results have been numerically validated using a CFD software and demonstrate that it gives a very good approximation of the real optimum which can be used as initial configuration for further optimization through CFD simulation or other optimization methods that require a starting point., The author Aran Solé would like to thank the Societat Economica Barcelonesa Amics del Pais (SEBAP) for the funds that made possible her research stay. The authors would like to thank Jean-Marie Mancaux for his help and Jinqiu Shen for her contribution in the work. The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREA (2014 SGR 123). GREA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. The work is partially funded by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER)). The research leading to these results has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 657466 (INPATH-TES). Aran Solé would like to thank Ministerio de Economía y Competitividad de España for Grant Juan de la Cierva, FJCI-2015-440 25741.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Experimental evaluation of a heating radiant wall coupled to a ground source heat pump

  • Romaní Picas, Joaquim
  • Pérez Luque, Gabriel
  • Gracia Cuesta, Alvaro de
A radiant wall heating system embedded in a heavy brickwork envelope and coupled to a ground source heat pump supplied has been experimentally tested under real outdoor conditions. This system was applied to a room sized cubicle built in Puigverd de Lleida (Spain) test-site, where it was studied in system vs. system analysis in comparison to a reference cubicle built with commercial available technologies (insulated alveolar brick wall and air-to-air heat pump). The results showed the potential of the radiant wall, which in continuous operation reached energy savings between 19.97% and 40.72% based on set-point temperature. Most important, the active thermal mass of radiant wall allowed operating in off peak periods. Otherwise, this peak load shifting ability was completely inexistent in the reference cubicle. However, the results show that the radiant cubicle was unsuited to operate in occupancy schedules due to its slow response time. Furthermore, the tests show that optimization of the radiant wall system requires a control strategy that takes in account the dynamics of the system., The work partially funded by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER), ENE2015-64117-C5-3-R (MINECO/FEDER), TIN2015-71799-C2-2-P and ULLE10-4E-1305). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2014 SGR 123) and the city hall of Puigverd de Lleida. This projects has received funding from the European Commission Seventh Framework Programme (FP/2007–2013) under Grant agreement Nº PIRSES-GA-2013-610692 (INNOSTORAGE) and from European Union's Horizon 2020 research and innovation programme under grant agreement Nº 657466 (INPATH-TES) and from EEA-Grants under grant IDI-20140914. Alvaro de Gracia would like to thank Ministerio de Economia y Competitividad de España for Grant Juan de la Cierva, FJCI-2014-19940.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Education and training gaps in the renewable energy sector

  • Lucas Porta, Hugo
  • Pinnington, Stephanie
  • Cabeza, Luisa F.
One of the barriers to achieve the expected renewable energy market development is the shortage of qualified human resources. Global data on education and training on renewable energies was analyzed in order to gain an understanding of the current education supply worldwide. Findings are: (i) the shortage is more acute in developing countries; (ii) there is a mismatch between education system offer and industry demand; (iii) there is also a mismatch in the suitability of the curricula; (iv) students and educators are moving towards online training for collaborating and learning. While it remains a challenge to increase, improve, and facilitate access to renewable energy education and training, the high interest of females in renewable energy education represents an opportunity to counter the scarcity of professionals in the sector., Authors would like to thank Mats Marquardt for his editing work and improvement proposals. The work is partially funded by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER)). Prof. Cabeza would like to thank the Catalan Government for the quality accreditation given to her research group GREiA (2017 SGR 1537). GREA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Materials selection for thermal energy storage systems in parabolic trough collector solar facilities using high chloride content nitrate salts

  • Ruiz-Cabañas, F. Javier
  • Prieto, Cristina
  • Madina, Virginia
  • Fernández Renna, Ana Inés
  • Cabeza, Luisa F.
The increasing role of concentrated solar power (CSP) within the renewable energy portfolio is attributed to the possibility of integrating thermal energy storage (TES) systems. Then, CSP technology has become one of the most interesting clean options to deliver dispatchable power on demand. Nowadays, commercial facilities use high quality solar salts (60%:40% NaNO3 and KNO3 by weight) as storage medium due to the attractive properties of this fluid to be applied under CSP operation conditions. Taking into account that CSP installations are designed with really large TES systems containing tens of thousands of tons, the use of lower quality nitrates salts would reduce the molten salts inventory cost and finally the investment cost of the CSP storage systems at commercial scale. The most important drawback of selecting low quality nitrates salts for high temperature CSP applications is the corrosion impact produced by impurities. Accordingly, chlorides have been identified in the state of the art as the impurity with higher effect over corrosion. This work is focused on A516 Gr70 carbon steel corrosion performance evaluation under high-chlorides content nitrates salts (1.2% and 3% by weight) at 400 °C. In addition, the feasibility of using the proposed low purity mixtures with current CSP facilities materials selection is analyzed. Results reported within this study show the critical effect of chloride content over corrosion mechanism producing lack of adherence between base metal and oxides layers in addition to corrosion products delamination and internal cracking. Then, the use of A516 Gr70 carbon steel is rejected for a long term design under solar salts containing chlorides content in the range 1.2–3% by weight being necessary a higher corrosion resistant materials selection. An improved materials selection focused on higher corrosion resistance alloys is discussed., The research leading to these results has received funding from Spanish government (Fondo tecnológico IDI-20090393, ConSOLida CENIT 2008-1005). The work is partially funded by the Spanish government (ENE2011-28269-C03-02, ENE2011-22722, ENE2015-64117-C5-1-R (MINECO/FEDER), and ENE2015-64117-C5-2-R (MINECO/FEDER)). The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREA (2014 SGR 123) and research group DIOPMA (2014 SGR 1543).
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Benchmarking of energy demand of domestic and small business buildings

  • Coma Arpón, Julià
  • Maldonado, José Miguel
  • Gracia Cuesta, Alvaro de
  • Gimbernat, Toni
  • Botargues, Teresa
  • Cabeza, Luisa F.
In Europe the building sector represents 41% of the final energy consumption and the 40% of the total GHG emissions of end-use sectors (Directive 2010/31/EU) [1]. Solar energy is one of the forms of renewable energy that has great potential to enable EU the ambition of 12% of heating coming from renewable sources by 2020 [2]. Within this context, the overall objective of the project Innovative Micro Solar Heat and Power System (Innova MicroSolar) is to develop a high performance and cost effective solar heat and power system, which consist in a novel flat Fresnel mirror solar concentrating collector and micro organic Rankine cycle plant combined with advanced phase change materials as thermal storage, all system managed by smart control units. This technology will be initially implemented in individual dwellings and small business residential buildings for on-site electricity and heat generation using solar thermal energy., This study has received funding from European Union’s Horizon 2020 research and innovation programme under grant agreement Nº723596 (Innova MicroSolar) and Nº 657466 (INPATHTES), from the European Commission Seventh Framework Programme (FP/2007-2013) under grant agreement Nº PIRSES-GA-2013-610692 (INNOSTORAGE). The work is partially funded by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER) and ENE2015- 64117-C5-3-R (MINECO/FEDER)). GREA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2014 SGR 123). Alvaro de Gracia would like to thank Ministerio de Economia y Competitividad de España for Grant Juan de la Cierva, FJCI-2014-19940.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

The connection between the heat storage capability of PCM as a material property and their performance in real scale applications

  • Mehling, Harald
  • Barreneche Güerisoli, Camila
  • Solé, Aran
  • Cabeza, Luisa F.
Using phase change materials (PCM) for Thermal Energy Storage, the most important material property is their heat storage capability, usually given as h(T). Ideally, h(T) changes suddenly at a single temperature. However, many PCM change phase in a temperature range and show hysteresis. In addition, experience shows that even measurements with the same device on the same material can give different results when the heating rate, the amount of sample mass or the equipment device are varied. The question thus arises how to deal with different h(T) results when trying to predict the performance of a real scale application. This paper identifies the main origins of these effects and gives strategies for dealing with them., The research leading to these results has received funding from the European Commission Seventh Framework Programme (FP/2007-2013) under grant agreement n° PIRSES-GA-2013-610692 (INNOSTORAGE) and from the European Union’s Horizon 2020 research and innovation program under grant agreement No 657466 (INPATH-TES). The authors would like to thank the Catalan Government for the quality accreditation given to their research groups GREA (2014 SGR 123) and DIOPMA (2014 SGR 1543). GREA and DIOPMA are certified agents TECNIO in the category of technology developers from the Government of Catalonia. This work has been partially funded by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER)). Dr. Camila Barreneche and Dr. Aran Solé would like to thank Ministerio de Economía y Competitividad de España for Grant Juan de la Cierva, FJCI-2014-22886 and FJCI-2015-25741, respectively.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Thermo-acoustic performance of green roof substrates in dynamic hygrothermal conditions

  • Fabiani, Claudia
  • Coma Arpón, Julià
  • Pisello, Anna Laura
  • Pérez Luque, Gabriel
  • Cotana, Franco
  • Cabeza, Luisa F.
Green roofs can be considered as effective and esthetically appreciated passive tools for energy saving systems in buildings. In particular, the effect of evapotranspiration and the large thermal inertia of such solutions, represent highly attractive properties to be implemented in advanced building envelope components. Although these properties are deeply influenced by external factors such as weather conditions, and greenery dynamics, the materials used in substrate and drainage layers are too commonly assumed as constant thermal insulation layers depending only on their physical properties and water content. In particular, common disaggregated materials used in internal layers of extensive green roofs, generally are characterized by a highly complex matrix, and consequently, such materials usually lack of realistic thermal-acoustic properties evaluation. The main objective of the study is to investigate the impact of water content on the thermo-acoustic performance of different disaggregated materials from green roofs substrates commonly used in Mediterranean climates. In particular, the TPS method was used to assess the effect of humidification and raining processes on the final performance of the considered samples. An extensive acoustic characterization was also developed, based on the acoustic transfer function method. Results show that raining processes can highly influence the thermal performance of such materials, which depending on their density, can even triple their thermal conductivity value and achieve twice the volumetric specific heat at ambient conditions. Furthermore, the acoustic characterization procedure showed that the biggest modification on the final acoustic absorption and insulation capability, i.e. about 20 dB when the 80 mm samples, was produced by increasing the water content of the system from 10% to 30% RH. On the contrary, the conditioning at 90% RH does not produce significant differences of the final acoustic behavior of the substrates. Keywords: green roofs, substrates, dynamic, Acknowledgments are due to the “CIRIAF program for UNESCO” in the framework of the UNESCO Chair “Water Resources Management and Culture”. The research leading to these results has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement No. 657466 (INPATH-TES). The work is also partially funded by COOL CRETE Project, under the framework of Call L. 598/94 Art. 11 – Industrial research and experimental development (Energy sector) supported by Luigi Metelli S.p.A., and by the Spanish governmentENE2015-64117-C5-1-R (MINECO/FEDER) in collaboration with the company Buresinnova S.A (Mercabarna Flor - Local n. 412 Ctra. Antiga de València, 1. 08830 Sant Boi de Llobregat. www.buresinnova.com). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. Julià Coma would like to thank Ministerio de Economia y Competitividad de España for Grant Juan de la Cierva, FJCI-2016-30345.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Numerical analysis of a latent heat thermal energy storage system under partial load operating conditions

  • Arena, Simone
  • Casti, Efisio
  • Gasia, Jaume
  • Cabeza, Luisa F.
  • Cau, Giorgio
One of the features that should be considered when designing a thermal energy storage (TES) system is its behaviour when subjected to non-continuous (partial loads) operating conditions. Indeed, the system performance can be sensibly affected by the partial charging and discharging processes. This topic is analysed in the present study by means of a two-dimensional axisymmetric numerical model implemented in COMSOL Multiphysics. A latent heat TES system consisting of a vertical concentric tube heat exchanger is simulated to investigate the effect of different partial load operating conditions on the system behaviour. The effects of different heat transfer distributions and evolutions of the solid-liquid interface, are evaluated to identify the optimal management criteria of the TES systems. The results showed that partial load strategies allow to achieve a substantial reduction in the duration of the TES (up to 50%) process against a small decrease in stored energy (up 30%). The close correlation between the energy and the duration of the TES cycle is also evaluated during the discharge using detailed maps related to the melting fraction. These maps allow for the evaluation of the most efficient load conditions considering both charging and discharging processes to satisfy a specific energy demand., Simone Arena and Efisio Casti would like to thank the Department of Mechanical, Chemical and Materials Engineering of the University of Cagliari for their founding research grants. The work was partially funded by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER)). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2014 SGR 123). GREA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. Jaume Gasia would like to thank the Departament d'Universitats, Recerca i Societat de la Informació de la Generalitat de Catalunya for his research fellowship (2017 FI_B1 00092).
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Influence of the heat transfer fluid in a CSP plant molten salts charging process

  • Peiró Bell-lloch, Gerard
  • Gasia, Jaume
  • Miró, Laia
  • Prieto, Cristina
  • Cabeza, Luisa F.
The selection of a proper heat transfer fluid (HTF) is a key factor to increase the efficiency of concentrated solar power plants and therefore, to reduce their internal associated CAPEX (capital expenditures of developing and constructing a plant, excluding any grid-connection charges) and OPEX (operating expenditures from the first year of a project's operation). This paper presents a comparative study of two commercial HTF which are widely used in different industries and CSP plants: thermal oil Therminol VP-1 and silicone fluid Syltherm 800. First, the authors theoretically studied the properties of both HTF based on the data given by the manufactures. Afterwards, the authors experimentally perform the comparison in a two-tank molten salt thermal energy storage pilot plant built at the University of Lleida (Spain). The study is focused on the plate heat exchanger of the facility during several charging processes with a counter flow arrangement. Results from both studies showed that, for the same working conditions, Therminol VP-1 is the best candidate for the above-mentioned purposes due to its higher heat transfer, lower thermal losses and lower power consumption associated to the HTF pump. However, it presents problems a low crystallization point, which should also be considered., The research leading to these results has received funding from Spanish goverment (Fondo tecnológico IDI-20090393, ConSOLida CENIT 2008-1005) and from Abengoa Solar NT. The work is partially funded by the Spanish government (ENE2008-06687-C02-01/CON, ENE2011-22722, ULLE10-4E-1305 and ENE2015-64117-C5-1-R (MINECO/FEDER)). The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREA (2014 SGR 123). This project has also received funding from the European Commission Seventh Framework Programme (FP/2007-2013) under Grant agreement NºPIRSES-GA-2013-610692 (INNOSTORAGE) and from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 657466 (INPATH-TES). Laia Miró would like to thank the Spanish Government for her research fellowship (BES-2012-051861). Jaume Gasia would like to thank the Departament d’Universitats, Recerca i Societat de la Informació de la Generalitat de Catalunya for his research fellowship (2017FI_B1 00092). The authors would like to thank Dr. Eduard Oró from Catalonia Institute for Energy Research (Spain) and Dr. Antoni Gil from Massachusetts Institute of Technology (USA) for their help during the initial stages of the experimentation.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

The evapotranspiration process in green roofs: a review

  • Cascone, Stefano
  • Coma Arpón, Julià
  • Gagliano, Antonio
  • Pérez Luque, Gabriel
Previous research has shown that most of the green roof benefits are related to the cooling effect. In the literature available, however, it is still not clear how and how much the evapotranspiration affects the performance of a green roof. In order to fill the gap in this research topic, this study carries out a review on the cooling effect due to the evapotranspiration process of green roofs. First of all, an overview of the evapotranspiration phenomenon in green roofs, as well as the equipment and methods used for its measurement are presented. Then, the main experimental results available in literature, the physical-mathematical models and the dynamic simulation software used for the evaluation of the latent heat flux are also analysed and discussed among the available literature. Moreover, this review proposes a classification of the results carried out by previous studies as function of the main parameters affecting the evapotranspiration process (e.g. volumetric water content, stomatal resistance, Leaf Area Index, solar radiation, wind velocity, relative humidity, soil thickness, and substrate composition). Additionally, a sensitivity analysis of the results obtained from the literature allowed underlining the correlation among the main factors affecting the evapotranspiration. Finally, a vision of the world area where green roof studies were performed is provided. From the results, it is possible to emphasize that most of the studies that evaluated the evapotranspiration used high precision load cells. Furthermore, all the heat transfer models of green roofs considered in this review took into account the latent heat flux due to evaporation of water from the substrate and plants transpiration, however, only few of them were experimentally validated., This work is partially funded by the Spanish governmentENE2015-64117-C5-1-R (MINECO/FEDER). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers by the Government of Catalonia. Julià Coma would like to thank Ministerio de Economia y Competitividad de España for the Grant Juan de la Cierva, FJCI-2016-30345. This research is also funded by “the Notice 5/2016 for financing the Ph.D. regional grant in Sicily” as part of the Operational Programme of European Social Funding 2014–2020 (PO FSE 2014–2020).
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Use of seagrass fibres in adobe bricks

  • Olacia, Elena
  • Pisello, Anna Laura
  • Chiodo, Vitaliano
  • Maisano, Susanna
  • Frazzica, Andrea
  • Cabeza, Luisa F.
The main aim of the present study is to measure the capability the 'Posidonia Oceanica' as fibre reinforcement for adobe bricks. This sea-plant is distributed in the Mediterranean coast, considered as a solid marine by-product. To analyse the performance, prismatic earthen specimens with seagrass fibres were compared with the most traditional additives for this purpose; straw fibres. Both fibres were included with different lengths and quantities. Previously, in order to understand their behaviour, the fibres themselves were evaluated. Tensile strength and water absorption tests were performed. Meanwhile bricks themselves were subjected to mechanical tests. Concerning the biomass fibres, results show that straw fibres present higher tensile resistance than the seagrass leafs while they are more fragile to breakage than seagrass; on the other hand, they have higher water absorption than seagrass. Mechanical results show variations depending on their fibre content and length. Nevertheless, bricks with long seagrass fibres present a characteristic good behaviour in terms of flexural and compressive strength. Generally, adobe bricks with both types of fibres achieve similar mechanical properties, generating favourable results in terms of comparison between them., The work presented was partially funded by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER)). The authors of this paper would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 642384 Buildings as Material Banks (BAMB).
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Phase change material selection for thermal processes working under partial load operating conditions in the temperature range between 120 and 200 ºC

  • Gasia, Jaume
  • Martín Llop, Marc
  • Solé, Aran
  • Barreneche Güerisoli, Camila
  • Cabeza, Luisa F.
In some processes, latent heat thermal energy storage (TES) systems might work under partial load operating conditions (the available thermal energy source is discontinuous or insufficient to completely charge the phase change material (PCM)). Therefore, there is a need to study how these conditions affect the discharge process to design a control strategy that can benefit the user of these systems. The aim of this paper is to show and perform at laboratory scale the selection of a PCM, with a phase change temperature between 120 and 200 ºC, which will be further used in an experimental facility. Beyond the typical PCM properties, sixteen PCMs are studied here from the cycling and thermal stability point of view, as well as from the health hazard point of view. After 100 melting and freezing cycles, seven candidates out of the sixteen present a suitable cycling stability behaviour and five of them show a maximum thermal-stable temperature higher than 200 ºC. Two final candidates for the partial loads approach are found in this temperature range, named high density polyethylene (HDPE) and adipic acid., The work was partially funded by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER)). The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREA and DIOPMA (2014 SGR 123, 2014 SGR 1543). GREA and DIOPMA are certified agents TECNIO in the category of technology developers from the Government of Catalonia. This project has received funding from the European Commission Seventh Framework Programme (FP/2007-2013) under Grant agreement No. PIRSES-GA-2013-610692 (INNOSTORAGE) and from the European Union’s Horizon 2020 research and innovation programme under grant agreement No. 657466 (INPATH-TES). Jaume Gasia would like to thank the Departament d’Universitats, Recerca i Societat de la Informació de la Generalitat de Catalunya for his research fellowship (2017 FI_B1 00092). Camila Barreneche and Aran Solé would like to thank the Ministerio de Economía y Competitividad de España for Grant Juan de la Cierva FJCI-2014-22886 and FJCI-2015-25741, respectively.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Advanced Concrete Steam Accumulation Tanks for Energy Storage for Solar Thermal Electricity

  • Prieto, Cristina
  • Pérez Osorio, David
  • Gonzalez-Roubaud, Edouard
  • Fereres, Sonia
  • Cabeza, Luisa F.
Steam accumulation is one of the most effective ways of thermal energy storage (TES) for the solar thermal energy (STE) industry. However, the steam accumulator concept is penalized by a bad relationship between the volume and the energy stored; moreover, its discharge process shows a decline in pressure, failing to reach nominal conditions in the turbine. From the economic point of view, between 60% and 70% of the cost of a steam accumulator TES is that of the pressure vessel tanks (defined as US$/kWhth). Since the current trend is based on increasing hours of storage in order to improve dispatchability levels in solar plants, the possibility of cost reduction is directly related to the cost of the material of pressure vessels, which is a market price. Therefore, in the present paper, a new design for steam accumulation is presented, focusing on innovative materials developed specifically for this purpose: two special concretes that compose the accumulation tank wall. Study of dosages, selection of materials and, finally, scale up on-field tests for their proper integration, fabrication and construction in prototype are the pillars of this new steam accumulation tank. Establishing clear and precise requirements and instructions for successful tank construction is necessary due to the highly sensitive and variable nature of those new concrete formulations., The research leading to these results has received funding from CDTI in the project Innterconecta Thesto (ITC-20111050). The work is partially funded by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER)). This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31—MCIU/AEI/FEDER, UE) and by the Ministerio de Ciencia, Innovación y Universidades—Agencia Estatal de Investigación (AEI) (RED2018-102431-T). This work is partially supported by ICREA under the ICREA Academia programme. Acknowledgments The authors would like to thank all the Chirivo Construcciones, Hormigones Aznalcóllar, Elabora, Azcatec, Next Force Engineering, Universidad de Granada, Aidico, Centro Andaluz de Metrología, AICIA and Abengoa teams involved in Solúcar Platform during prototype construction and start-up. Cabeza would like to thank the Catalan Government for the quality accreditation given to her research group GREiA (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Sustainability and social justice dimension indicators for applied renewable energy research: A responsible approach proposal

  • Carbajo Garcia, Ruth
  • Cabeza, Luisa F.
Aspects of sustainability and social justice deserve special attention in the research and innovation landscape in Europe. In this vein, the inclusion of innovative research and innovation policies, such as Responsible Research and Innovation, devoted to mainstream social outcomes, to deploy democratic governance of science, and to drive innovation into a direction that is ethically acceptable, societally desirable and sustainable are noteworthy. However, substantial efforts are required when it comes to integrate the interactions between renewable energy research and energy and climate policies within responsible approaches. In order to adapt responsible research and innovation approach for the purpose of building an alternative context and assessment approach for sustainable transitions, this paper presents a review of approaches around sustainability and social justice dimensions. The thresholds of this endeavour are detailed in terms of the challenges for the integration, the identification of the inhibitors and facilitators of policy integration and the proposal of the levels for a methodology for this integration. The results show that the different readings and understanding of the contexts and dimensions and the existence of knowledge gaps between policy targets and the outcomes of research and innovation can be considered inhibitors for the integration. In contrast the interlinks between dimensional concepts, backgrounds and rationales appear as facilitators. The innovative contribution of this paper is focused on the contextualization of the dimensions through the use of socio-technical and multi/inter/trans and cross-disciplinary approaches. The authors conclude that the process of introducing a more holistic and alternative approach opens the re-envision of policy elements. Moreover, RRI offers an innovative perspective to the transition approach as well as tools for decision-making and policy processes assessment, in an arena where constant innovation is taking place and new structures, processes and metrics are necessary to guide this process., The work presented was partially funded by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER)). The authors of this paper would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Two-tank molten salts thermal energy storage system for solar power plants at pilot plant scale: Lessons learnt and recommendations for its design, start-up and operation

  • Peiró Bell-lloch, Gerard
  • Prieto, Cristina
  • Gasia, Jaume
  • Jové, Aleix
  • Miró, Laia
  • Cabeza, Luisa F.
Renewable energies are main players to ensure the long-term energy supply. Solar power plants with thermal energy storage (TES) are one of the available renewable technologies which have more potential. Nowadays, there are still several aspects in the design and operation of these power plants which need to be improved, such as the correct operation of some specific instrumentation, the compatibility between TES materials and storage tanks materials, and operational process strategies. This paper presents the acquired experience during the design, start-up, and operation of a kWh scale pilot experimental facility built at the University of Lleida (Spain) together with Abengoa Research (Spain) in 2008. The versatility of this facility has allowed simulating real working conditions and therefore testing different TES systems, TES materials, solar power plant components, and operational strategies focused on TES for temperatures up to 400 °C. In the present paper, the authors show the lessons learnt at pilot and present the main problems and limitations encountered, and give advices of this experimental set-up to extrapolate the data to real plant, to provide solutions to technical problems and reduce the cost of commercial plants., The authors want to thank specially to Dr. Eduard Oró (today at Institut de Recerca d’Energies de Catalunya, Spain) and Dr. Antoni Gil (today at Massachusetts Institute of Technology, USA) for their help in the design, start-up and operation of the pilot plant facility. The research leading to these results has received funding from Spanish government through CDTI granted projects (Fondo tecnológico IDI-20090393, ConSOLida CENIT 2008-1005) and from Abengoa Solar NT. The work is partially funded by the Spanish government (ENE2008-06687-C02-01/CON, ENE2011-22722, ULLE10-4E-1305, and ENE2015-64117-C5-1-R (MINECO/FEDER)). The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREA (2014 SGR 123). GREA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This project has received funding from the European Commission Seventh Framework Programme (FP/2007-2013) under Grant agreement NºPIRSES-GA-2013-610692 (INNOSTORAGE) and from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 657466 (INPATH-TES). Laia Miró would like to thank the Spanish Government for her research fellowship (BES-2012-051861). Jaume Gasia would like to thank the Departament d'Universitats, Recerca i Societat de la Informació de la Generalitat de Catalunya for his research fellowship (2017FI_B1 00092).
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Experimental analysis of the effective thermal conductivity enhancement of PCM using finned tubes in high temperature bulk tanks

  • Gil, Antoni
  • Peiró Bell-lloch, Gerard
  • Oró Prim, Eduard
  • Cabeza, Luisa F.
Solar cooling is a promising solution to overcome the high energy demand of buildings. Nevertheless, the time dependent nature of the solar source leads to the need of storage systems in order to better match the energy demand and supply. For this purpose, thermal energy storage was considered during last decades as the optimal solution at commercial scale. Latent thermal energy storage offers higher energy densities together with more constant outlet temperature than sensible heat storage, but the low thermal conductivities of PCMs represents the main drawback which limits its applicability. Several studies based on heat transfer enhancement techniques applied in latent thermal energy storage have already been performed. Specifically, the technique of adding fins in storage tanks, which is the most known and studied. However, there are few experimental studies at pilot plant scale focused on this technique and less on the analysis of the heat transfer enhancement through the parameter effective thermal conductivity. This paper presents an experimental study where this parameter is determined and compared using of two identical latent storage tanks, one with 196 transversal squared fins and another one without fins. In this case, hydroquinone was selected as PCM. A set of six experiments was performed at pilot plant of the University of Lleida (Spain), combining three different HTF flow rates and two temperature gradients between HTF inlet temperature and initial PCM temperature. Experimental results showed that the addition of fins can increase the effective thermal conductivity between 4.11% and 25.83% comparing the experiment with highest and lowest thermal power supplied to the PCM, respectively., The work was partially funded by the Spanish government (ULLE10-4E-1305 and ENE2015-64117-C5-1-R (MINECO/FEDER)). The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREA (2017 SGR 1537). GREA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Considerations for the use of metal alloys as phase change materials for high temperature applications

  • Fernández Renna, Ana Inés
  • Barreneche Güerisoli, Camila
  • Belusko, Martin
  • Segarra Rubí, Mercè
  • Bruno, Frank
  • Cabeza, Luisa F.
The use of paraffin, salts and salt hydrates as phase change materials (PCMs) have been researched extensively and used in a number of commercial applications. However, metals and metal alloys, which possess a high storage density on a volume basis as well as a substantially higher thermal conductivity, has received much less attention. This paper discusses the considerations for the use of metal and metal alloys as phase change materials for high temperature thermal storage applications, as well as summarises the literature on the limited research in this area. Although some pure metals and metal alloys present interesting thermal properties to be used as PCMs in thermal storage systems, there is a lack of understanding on the implications of the metallurgical aspects related to the melting and solidification of these materials under thermal cycling at high temperatures. The main issues to be considered include vapour pressure, undercooling, corrosion, segregation, changes in composition and microstructure, changes in thermal properties and undesired reactions. Further research is needed before these materials can be used as PCMs in thermal energy storage systems in industry., The research leading to these results has received funding from the European Commission Seventh Framework Programme (FP/2007-2013) under grant agreement n° PIRSES-GA-2013-610692 (INNOSTORAGE) and from the European Union's Horizon 2020 Research and Innovation Program under grant agreement No 657466 (INPATH-TES). The authors would like to thank the Catalan Government for the quality accreditation given to their research groups GREA (2014 SGR 123) and DIOPMA (2014 SGR 1543), and also the Spanish Government for the projects ENE2015-64117-C5-1-R and ENE2015-64117-C5-2-R (MINECO/FEDER, UE). Dr. Camila Barreneche would like to thank Ministerio de Economia y Competitividad de España for Grant Juan de la Cierva, FJCI-2014-22886. This paper was produced with support from the “Premier’s Research Industry Fund - International Research Grant Program” (IRGP 33) funded by the Government of South Australia.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Corrosion monitoring and mitigation techniques on advanced thermal energy storage materials for CSP plants

  • Fernández, Ángel G.
  • Cabeza, Luisa F.
High temperature corrosion is one of the most important issues for materials selection, structure design and service life prediction of engineering parts that are exposed to high temperature environments. The prevention of high temperature corrosive attacks on materials plays a critical role in aspects such as reliability, quality, safety and profitability of any industrial sector associated with high temperature process and in the study case, concentrated solar power (CSP) market, using inorganic molten salts as storage material. The aim of this research is the development of corrosion tests through conventional gravimetric techniques focussed on thermal energy storage (TES) materials as well as electrochemical impedance spectroscopy (EIS) analysis for storage systems monitoring. To mitigate corrosion, different alumina forming austenitic (AFA) alloys were exposed to the most promising molten salts to be proposed for the new generation of CSP plants, nitrate, carbonate and chloride molten salts. Ni base alloys showed a better behaviour in the corrosive environments and electrochemical impedance tests revealed the formation of a protective layer in the first 100h. The gravimetric results and the scanning electron microscopy (SEM) analyses that were performed, confirmed the excellent behaviour of the steels tested in nitrate salts reducing the corrosion in these promising novel molten salts compared with the solar salt currently used in commercial CSP. On the other hand, carbonate and chloride molten salts showed a higher corrosion rate in the materials proposed, especially chloride molten salts., The authors would like to acknowledge the financial support provided by CONICYT/FONDAP 15110019 "Solar Energy Research Center" SERC-Chile and GIZ “Programa de pasantía en el extranjero en tecnologías de concentración solar para investigadores”. The work is partially funded by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER)). The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREiA (2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Passive cooling of buildings with phase change materials using whole-building energy simulation tools: A review

  • Saffari Tabalvandani, Mohammad
  • Gracia Cuesta, Alvaro de
  • Ushak, Svetlana
  • Cabeza, Luisa F.
Buildings contribute to climate change by consuming a considerable amount of energy to provide thermal comfort for occupants. Cooling energy demands are expected to increase substantially in the world. On this basis, technologies and techniques providing high energy efficiency in buildings such as passive cooling are highly appreciated. Passive cooling by means of phase change materials (PCM) offers high potential to decrease the cooling energy demand and to improve the indoor comfort condition. However, in order to be appropriately characterized and implemented into the building envelope, the PCM use should be numerically analyzed. Whole-building energy simulation tools can enhance the capability of the engineers and designers to analyze the thermal behavior of PCM-enhanced buildings. In this paper, an extensive review has been made, with regard to whole-building energy simulation for passive cooling, addressing the possibilities of applying different PCM-enhanced components into the building envelope and also the feasibility of PCM passive cooling system under different climate conditions. The application of PCM has not always been as energy beneficial as expected, and actually its effectiveness is highly dependent on the climatic condition, on the PCM melting temperature and on the occupants behavior. Therefore, energy simulation of passive PCM systems is found to be a single-objective or multi-objective optimization problem which requires appropriate mathematical models for energy and comfort assessment which should be further investigated. Moreover, further research is required to analyze the influence of natural night ventilation on the cooling performance of PCM., The work is partially funded by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER) and ENE2015-64117-C5-3-R (MINEDO/FEDER)). The authors would like to thank the Catalan Government for the quality accreditation g iven to their research group GREA (2014 SGR 123). This project has received funding from the European Commission Seventh Framework Program (FP/2007-2013) under Grant agreement Nº PIRSES-GA-2013-610692 (INNOSTORAGE) and from the European Union’s Horizon 2020 research and innovation program under grant ag reement No 657466 (INPATH-TES). Alvaro de Gracia would like to thank Ministerio de Economia y Competitividad de España for Grant Juan de la Cierva, FJCI-2014-19940.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Critical challenges and capacity building needs for renewable energy deployment in Pacific Small Island Developing States (Pacific SIDS)

  • Lucas Porta, Hugo
  • Fifita, Solomone
  • Talab, Ilham
  • Marschel, Cornelia
  • Cabeza, Luisa F.
The Pacific Small Island Developing States (SIDS) are among the most vulnerable to the impacts of climate change. Besides, they are some of the most dependent on imported petroleum products in the world, the use of renewable energy (RE) can help minimize the economic risk associated with the price volatility of fossil fuels. The region is increasingly adopting renewable energy (RE) targets and policies. Successful examples of RE deployment in the Pacific SIDS exist; however, many barriers persist and prevent the use of the region’s RE resources in a larger scale. Challenges for RE deployment in islands can be grouped in six categories: i) lack of RE data, ii) need for policy and regulatory frameworks, iii) scarcity of financial opportunities, iv) lack of human resources, v) costly infrastructure, and vi) socio-cultural impediments. Based on a survey conducted among main stakeholders in the region, within the framework of the Pacific Region Capacity Building Initiative of the International Renewable Energy Agency (IRENA) carried out in cooperation with the Secretariat of the Pacific Community (SPC), this paper identifies the specific characteristics of these challenges in the context of the Pacific SIDS, provide a qualitative assessment and identifies recommendations to overcome these challenges., The authors would like to acknowledge Mr. Dolf Gielen form the Secretariat of the International Renewable Energy Agency. The authors from the University of Lleida would like to thank the Catalan Government for the quality accreditation given to their research group GREA (2014 SGR 123). The work is partially funded by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER).
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Corrosion evaluation of alumina-forming alloys in carbonate molten salt for CSP plants

  • Fernández, Ángel G.
  • Pineda, Fabiola
  • Walczak, Magdalena
  • Cabeza, Luisa F.
The use of carbonate molten salts for the new generation of concentrated solar power (CSP) plants have been considered and analysed during the last years to improve the efficiency of energy generation. However, the high temperature and corrosivity of the salts pose a risk on safety and profitability of the technology requiring more resistant materials. In this study, two alumina-forming austenitic (AFA) alloys corresponding to modified OC4 and HR224 grades, were exposed to the eutectic ternary Li2CO3-K2-CO3-Na2CO3 (32.1-34.5-33.4 wt%) salt mixture at 650 ºC for 1000 h. The evolution of weight change along the exposure time and analysis of the resulting scales by means of scanning electron microscopy (SEM), X-Ray diffraction (XRD), and glow discharge optical emission spectroscopy (GDOES) revealed a good performance of both steel grades associated with the formation of multi-layered corrosion products. Whereas both alloys undergo external oxidation with the formation of NiO, internal oxidation with the formation of two spinels is the case of HR224. The rate of corrosion is significantly lower than those reported in molten carbonated in non-AFA alloys, allowing to recommend OC4 and HR224 for use in the carbonate-based CSP., The research leading to these results has received funding from Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER)). The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREiA (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. Angel G. Fernández would like to acknowledge the financial support provided by CONICYT/FONDAP 15110019 “Solar Energy Research Center” SERC-Chile. Additionally, the authors would like to acknowledge Fondequip EQM160091 for funding Glow Discharge Optical Emission Spectroscopy (GD-OES) and CONICYT-PAI “Concurso inserción en el sector productivo, segunda convocatoria 2017, ISP i78170200020”.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Supercritical CO2 as heat transfer fluid: A review

  • Cabeza, Luisa F.
  • Gracia Cuesta, Alvaro de
  • Fernández Renna, Ana Inés
  • Farid, Mohammed M.
This paper presents a comprehensive review of all correlations and experimental studies available in the literature to determine the heat transfer coefficient of supercritical CO2 flowing in heat exchangers. The different applications in which it is used are also reviewed and discussed. The correlations obtained from extensive experimental measurements are presented for different geometries (horizontal, vertical and inclined tubes, closed-loop circular pipes, and mini-channels) and dimensions. The review shows that there is a lack of a unique universal correlation for each geometry, suggesting the need for more work in this area., The work partially funded by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER) and ENE2015-64117-C5-3-R (MINECO/FEDER)). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2014 SGR 123). This project has received funding from the European Commission Seventh Framework Programme (FP/2007-2013) under Grant agreement N°PIRSES-GA-2013-610692 (INNOSTORAGE) and from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 657466 (INPATH-TES), and the funds received by the Royal Society of New Zealand. Alvaro de Gracia would like to thank Ministerio de Economia y Competitividad de España for Grant Juan de la Cierva, FJCI-2014-19940.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Weighted argumentation for analysis of discussions in twitter

  • Alsinet, Teresa
  • Argelich Romà, Josep
  • Béjar Torres, Ramón
  • Fernàndez Camon, César
  • Mateu Piñol, Carles
  • Planes Cid, Jordi
Twitter has become a widely used social network to discuss ideas about many domains. This leads to a growing interest in understanding what are the major accepted or rejected opinions in different domains by social network users. At the same time, checking what are the topics that produce the most controversial discussions among users can be a good tool to discover topics that can be divisive, what can be useful, e.g., for policy makers. With the aim to automatically discover such information from Twitter discussions, we present an analysis system based on Valued Abstract Argumentation to model and reason about the accepted and rejected opinions. We consider different schemes to weight the opinions of Twitter users, such that we can tune the relevance of opinions considering different information sources from the social network. Towards having a fully automatic system, we also design a relation labeling system for discovering the relation between opinions. Regarding the underlying acceptability semantics, we use ideal semantics to compute accepted/rejected opinions. We define two measures over sets of accepted and rejected opinions to quantify the most controversial discussions. In order to validate our system, we analyze different real Twitter discussions from the political domain. The results show that different weighting schemes produce different sets of socially accepted opinions and that the controversy measures can reveal significant differences between discussions., This work has been partially funded by the Spanish MICINN Projects TIN2014- 53234-C2-2-R, TIN2015-71799-C2-2-P and ENE2015-64117-C5-1-R. The authors would like to thank anonymous reviewers for providing helpful comments to improve the paper.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Trends in penetration and ownership of household appliances

  • Cabeza, Luisa F.
  • Ürge-Vorsatz, Diana
  • Palacios, Anabel
  • Ürge, Daniel
  • Serrano, Susana
  • Barreneche Güerisoli, Camila
Since appliances consume a large fraction of the residential final energy consumption, analysing the impact and trends in penetration and ownership of appliances are targets of interest to researchers, companies and policy makers. However, there is a lack of published data based on the study of appliance penetration or ownership comparing different countries trends and assessing different appliances families. The data is usually found in percentages related to energy use or other factors, or in national directive documents written in local languages. The main aim of this paper is to analyse the trends in appliances penetration and/or ownership in the residential buildings sector providing access to the data of ten countries representing different world areas, and 20 appliances which fell into three distinct appliance categories (white goods, brown goods and small appliances), in a comparable framework. Penetration data is given for Australia, Austria, Denmark, France, Spain, UK, and USA; and ownership data for Australia, China, Hungary, Japan and USA., The work is partially funded by the Spanish government (ENE2015-64117-C5-1-R). The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREA and DIOPMA (2014 SGR 123 and 2014 SGR 1543, respectively). Dr. Camila Barreneche would like to thank Ministerio de Economia y Competitividad de España for grant Juan de la Cierva, FJCI-2014–22886.
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Optimization of coupled building roof solar reflectance and thermal insulation level for annual energy saving under different climate zones

  • Piselli, Cristina
  • Pisello, Anna Laura
  • Gracia Cuesta, Alvaro de
  • Saffari Tabalvandani, Mohammad
  • Cotana, Franco
  • Cabeza, Luisa F.
The aim of this work is to assess building energy performance optimization potential of cool roof solutions in different climate conditions worldwide through dynamic thermal-energy simulation and optimization analysis. Moreover, given the dependence of roof performance on insulation level, the influence of roof insulation variation on optimum roof solar reflectance is evaluated. Therefore, the multi-dimensional optimization of combined building roof solar reflectance capability and thermal insulation level is carried out to minimize annual energy consumption for air-conditioning of standard ASHRAE building model for small offices, in each considered climate zone. Findings of this research highlight how the classic approach of super-insulated buildings for energy saving needs to be reframed for the office case, by integrating other passive solutions for truly environmentally friendly and comfortable buildings., The research leading to these results has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement N°657466 (INPATH-TES). The work is partially funded by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER) and ENE2015-64117-C5-3-R (MINECO/FEDER)). The authors from the University of Lleida would like to thank the Catalan Government for the quality accreditation given to their research group (2014 SGR 123). Anna Laura Pisello’s acknowledgments are due to the UNESCO Chair “Water Resources Management and Culture”, for supporting her research. Alvaro de Gracia would like to thank Ministerio de Economia y Competitividad de España for Grant Juan de la Cierva, FJCI-2014-19940.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Assessment of the hydration/dehydration behaviour of MgSO4∙7H2O filled cellular foams for sorption storage applications through morphological and thermo-gravimetric analyses

  • Calabrese, Luigi
  • Brancato, Vincenza
  • Palomba, Valeria
  • Frazzica, Andrea
  • Cabeza, Luisa F.
In this article, the relationship between morphological characteristics and de/hydration performance was assessed on an innovative magnesium sulphate heptahydrate filled silicone composite foam for sorption thermal energy storage applications. Hydration and dehydration aspects of the foam were investigated by varying salt hydrate filler content. The composite foam showed a mixed open/closed cellular structure, whose morphology was dependent on the filler content present in the formulation. Low salt content foams (40 wt% and 50 wt% salt content) highlighted a predominantly open cell structure with a strong interconnection between bubbles. High salt content foams (60wt% and 70 wt% salt content) showed a structure for which the cellular interconnections were more limited. Compared to pure salt, it was evidenced that salt filled composite foams have a significant de/hydration capacity. The water/salt reaction is not hindered by the foaming process. Based on morphological and thermo-physical properties of the foam a simplified vapour diffusion flow process in composite foams was proposed., The present work was partially funded by PON “Ricerca e Competitività 2007-13” PON03PE_00206_2 S5 - Smart Small Scale Solar Systems. The work was partially funded by the Spanish government (ENE2015-64117-C5-1-R). The authors would like to thank the Catalan Government for the quality accreditation given to her research group (2017 SGR 1537). GREA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Vertical greenery systems for energy savings in buildings: a comparative study between green walls and green facades

  • Coma Arpón, Julià
  • Pérez Luque, Gabriel
  • Gracia Cuesta, Alvaro de
  • Burés, Silvia
  • Urrestarazu, Miguel
  • Cabeza, Luisa F.
During the last decade, vertical greenery systems are increasing their presence in building designs, providing several urban ecosystem services. One of them is the potential to provide energy savings in buildings, which develops an important role, however, data about its performance during winter periods is still scarce. Therefore, the main objective of this paper is to compare at real scale the thermal performance of two different vertical greenery systems implemented in experimental houses-like cubicles for both cooling and heating periods. A double-skin green facade has been installed in the first cubicle that uses deciduous creeper plants, while the second one is designed with green walls made with evergreen species. Finally, a third identical cubicle without any green coverage is used as reference. Two different types of experiments have been carried out to test the performance of the house like-cubicles. One consists of controlling the internal ambient temperature providing heating or cooling to maintain the desired comfort conditions. On the other hand, to study the thermal response of the construction system, the heating, ventilation and air conditioning system was disconnected and the cubicles were tested under free floating condition. First results showed a high potential for energy savings during cooling season for green wall (58.9%) and double-skin green facade (33.8%) in comparison to the reference system. On the other hand, for heating periods no extra energy consumption was observed for evergreen system., The work partially funded by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER), ENE2015-64117-C5-3-R (MINECO/FEDER) and ULLE10-4E-1305) in collaboration with the company Buresinnova S.A (C/Saragossa, 95 Entsol 3a, 08006 BARCELONA). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2014 SGR 123) and to the city hall of Puigverd de Lleida. This study has received funding from the European Commission Seventh Framework Programme (FP/2007–2013) under Grant agreement Nº PIRSES-GA-2013-610692 (INNOSTORAGE) and from European Union's Horizon 2020 research and innovation programme under grant agreement Nº 657466 (INPATH-TES). Alvaro de Gracia would like to thank Ministerio de Economia y Competitividad de España for Grant Juan de la Cierva, FJCI-2014-19940. Julià Coma would like to thank the Departament d'Universitats, Recerca i Societat de la Informació de la Generalitat de Catalunya for his research fellowship.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Study of the Thermal Properties and the Fire Performance of Flame Retardant-Organic PCM in Bulk Form

  • Palacios, Anabel
  • Gracia Cuesta, Alvaro de
  • Haurie, Laia
  • Cabeza, Luisa F.
  • Fernández Renna, Ana Inés
  • Barreneche Güerisoli, Camila
The implementation of organic phase change materials (PCMs) in several applications such as heating and cooling or building comfort is an important target in thermal energy storage (TES). However, one of the major drawbacks of organic PCMs implementation is flammability. The addition of flame retardants to PCMs or shape-stabilized PCMs is one of the approaches to address this problem and improve their final deployment in the building material sector. In this study, the most common organic PCM, Paraffin RT-21, and fatty acids mixtures of capric acid (CA), myristic acid (MA), and palmitic acid (PA) in bulk, were tested to improve their fire reaction. Several flame retardants, such as ammonium phosphate, melamine phosphate, hydromagnesite, magnesium hydroxide, and aluminum hydroxide, were tested. The properties of the improved PCM with flame retardants were characterized by thermogravimetric analyses (TGA), the dripping test, and differential scanning calorimetry (DSC). The results for the dripping test show that fire retardancy was considerably enhanced by the addition of hydromagnesite (50 wt %) and magnesium hydroxide (50 wt %) in fatty acids mixtures. This will help the final implementation of these enhanced PCMs in building sector. The influence of the addition of flame retardants on the melting enthalpy and temperatures of PCMs has been evaluated., The research leading to these results has received funding from the European Commission Seventh Framework Programme (FP/2007-2013) under grant agreement number PIRSES-GA-2013-610692 (INNOSTORAGE) and from the European Union’s Horizon 2020 research and innovation program under grant agreement No. 657466 (INPATH-TES). The authors would like to thank the Catalan Government for the quality accreditation given to their research groups GREA (2014 SGR 123), DIOPMA (2014 SGR 1543) and GICITED (2014 SGR 1298), and also the MINECO for the project BIA2014-52688-R, ENE2015-64117-C5-1-R, ENE2015-64117-C5-2-R, and ENE2015-64117-C5-3-R. Alvaro de Gracia and Camila Barreneche would like to thank Ministerio de Economia y Competitividad de España for Grant Juan de la Cierva, FJCI-2014-19940 and FJCI-2014-22886, respectively.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Rammed earth walls in Mediterranean climate: material characterization and thermal behaviour

  • Serrano, Susana
  • Rincón, Lídia
  • González, Belen
  • Navarro Ezquerra, Antonia
  • Bosch, Montserrat
  • Cabeza, Luisa F.
Rammed earth is considered a very sustainable construction system due to its low embodied energy, long service life and high recyclability. However, authors found that there is a lack of experimental results at real scale regarding rammed earth thermal behaviour. For this reason, this paper is first focused on the characterization of two different types of earth in order to check the suitability of being used in rammed earth walls. After the characterization, two experimental cubicle-shape buildings were built in Barcelona and Puigverd de Lleida (Spain) in order to test the thermal behaviour of their walls in two different climatic conditions. Temperature profiles inside walls have been monitored using thermocouples and temperature profile of southern walls was analysed in free floating conditions during summer and winter periods of 2013. Results show that thermal amplitude from outside to inside temperatures are decreased by rammed earth walls, achieving constant temperatures in inner surface of southern walls., The work was partially funded by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER)), in collaboration with the City Hall of Puigverd de Lleida. The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2014 SGR 123). This project has received funding from the European Commission Seventh Framework Programme (FP/2007-2013) under Grant agreement Nº PIRSES-GA-2013-610692 (INNOSTORAGE) and from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 657466 (INPATH-TES). Barcelona cubicle has been conducted under the direction of the company Casa S-Low, with the collaboration of Luis Allepuz y Cristian Poza in their final degree project at EPSEB (UPC).
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Empirical equation to estimate viscosity of paraffin

  • Ferrer, Gerard
  • Gschwander, Stefan
  • Solé, Aran
  • Barreneche Güerisoli, Camila
  • Fernández Renna, Ana Inés
  • Schossig, Peter
  • Cabeza, Luisa F.
Thermal energy storage (TES) systems using phase change materials (PCM) are nowadays widely developed to be applied in solar power plants or cooling and domestic comfort services. The design of a TES system does not only rely on the energy density that a PCM can provide, but also on other important material properties such as its rheological behavior when the PCM is melted. Viscosity varies with temperature, but the lack of an empirical equation predicting its value has lead researchers to simulate the system performance taking constant viscosity values which, consequently, have led to errors on the designs. As paraffin are one of the most common PCM types used, the present paper evaluates the rheology of four commercial paraffin with different phase change temperatures in order to find out an empirical equation for the whole paraffin family. A polynomial 3 model type equation has been found as the best one to predict paraffin viscosity., The work is partially funded by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER) and ENE2015-64117-C5-2-R (MINECO/FEDER)). The authors would like to thank the Catalan Government for the quality accreditation given to their research groups GREA (2014 SGR 123) and research group DIOPMA (2014 SGR 1543). The research leading to these results has received funding from RTC-2015-3583-5 (INPHASE) del Ministerio de Economía y Competitividad, dentro del Programa Estatal de Investigación, Desarrollo e Innovación Orientada a los Retos de la Sociedad, en el marco del Plan Estatal de Investigación Científica y Técnica y de Innovación 2013–2016, y ha sido cofinanciado con FONDOS FEDER, con el objetivo de promover el desarrollo tecnológico, la innovación y una investigación de calidad, and from the European Union’s Seventh Framework Programme (FP7/2007-2013) under grant agreement n° PIRSES-GA-2013-610692 (INNOSTORAGE) and from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 657466 (INPATH-TES). Dr. Camila Barreneche would like to thank Ministerio de Economia y Competitividad de España for Grant Juan de la Cierva, FJCI-2014-22886.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Influence of the storage period between charge and discharge in a latent heat thermal energy storage system working under partial load operating conditions

  • Gasia, Jaume
  • Gracia Cuesta, Alvaro de
  • Zsembinszki, Gabriel
  • Cabeza, Luisa F.
The supply intermittency of energy sources like solar energy or industrial waste heat should be properly addressed when studying latent heat thermal energy storage (TES) systems, since it might cause an incomplete melting/solidification of phase change materials (PCM). In the present paper, and experimental study was performed to analyse the storage period (also known as stand-by period) in a latent heat TES system working under partial load operating conditions and the effect of its duration on the subsequent discharging process. In the experimental set-up, 99.5 kg of high density polyethylene (HDPE) was used as PCM in a 0.154m3 storage tank based on the shell-and-tube heat exchanger concept. Four different percentages of charge were evaluated: 58%, 73%, 83% (partial charge), and 97% (full charge). Each charging level was followed by three different periods of storage: 25 min, 60 min, and 120 min. The fact of working at different levels of charge caused that in some regions of the TES system the PCM was not completely melted. Thus, at the end of the charging process different levels of thermal homogenisation were observed. However, during the storage period, the PCM temperature showed a tendency to homogenisation, which was influenced by the energy distribution within the PCM, the heat losses, and the duration of the storage period. Focusing on the discharging period, it was observed that the duration of the storage period slightly affected the temperature and heat transfer profiles, causing the main differences of performance during the first 30 min of process., This work was partially funded by the Ministerio de Economía y Competitividad de España (ENE2015-64117-C5-1-R (MINECO/FEDER) and ENE2015-64117-C5-3-R (MINECO/FEDER)). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. Jaume Gasia would like to thank the Departament d'Universitats, Recerca i Societat de la Informació de la Generalitat de Catalunya for his research fellowship (2018 FI_B2 00100).
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Ensayos preliminares de una microturbina de ciclo orgánico de Rankine alimentada por un campo solar de concentración tipo Fresnel lineala

  • Maldonado, José Miguel
  • Gracia Cuesta, Alvaro de
  • Mahkamov, Khamid
  • Costa, Carolina
  • Kenisarin, Murat
  • Pili, Piero
  • Manca, Roberto
  • Leroux, Arthur
  • Mintsa, André Charles
  • Bartolini, Carlo M.
  • Pirro, Matteo
  • Lynn, Kevin
  • Mullen, David
  • Halimic, Elvedin
  • Cabeza, Luisa F.
El propósito de esta investigación es evaluar la influencia del tipo de cemento en sí mismo a altas temperaturas, desestimando el resto de componentes del hormigón. El presente estudio se centra en la comparación del tratamiento de dos tipos de cemento, a saber, cemento Portland (OPC) y cemento aluminoso (cemento de aluminato de calcio, CAC). Se determina las características físicas y resistencias mecánicas a compresión. A pesar de la resistencia a altas temperaturas del CAC y la baja relación agua/cemento (a/c) utilizada, este tipo de pasta de cemento requiere de un curado inminente. Si tal hidratación no se ejecuta en sus primeras edades, la pasta de CAC muestra un comportamiento similar a la pasta de OPC, desaprovechando tanto sus características refractarias como sus altas resistencias mecánicas iniciales., The purpose of this investigation is to evaluate the influence of cement type itself, at high temperatures, disregarding the rest of the concrete components. The present study focuses on the treatment comparison of two cement types, known as, ordinary Portland cement (OPC) and calcium aluminate cement (CAC). The physical characteristics and compressive strength are determined. Despite the resistance to high temperatures of the CAC and the low water/cement (w/c) ratio used, this type of cement paste requires an imminent cure at certain temperature. If such hydration is not carried out in its early ages, the CAC paste shows a behavior similar to OPC paste, wasting both its refractory characteristics and its high initial mechanical resistances., Este trabajo ha sido parcialmente financiado el programa de Investigación y Desarrollo H2020 de la Unión Europea, a través del Grant Agreement 723596, cuyo nombre de referencia es Innova MicroSolar. Este trabajo ha sido cofinanciado por el Ministerio de Economía y Competitividad de España (ENE2015-64117-C5-1-R (MINECO/FEDER) y ENE2015-64117-C5-3-R (MINECO/FEDER)). Los autores quieren agradecer al Gobierno de Cataluña por la acreditación de calidad otorgada a su grupo de investigación (2017 SGR 1537). GREA es un agente TECNIO certificado en la categoría de desarrolladores tecnológicos por el Gobierno de Cataluña. José Miguel Maldonado agradece al Gobierno de España la concesión de la ayuda para contratos predoctorales para la formación de doctores (BES-2016-076554). Alvaro de Gracia agradece los fondos recibidos del programa de Investigación y Desarrollo H2020 de la Unión Europea, a través del Marie Sklodowska-Curie Grant Agreement No 712949.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Molten salt corrosion mechanisms of nitrate based thermal energy storage materials for concentrated solar power plants: A review

  • Fernández, Ángel G.
  • Cabeza, Luisa F.
Corrosion mechanisms for current heat transfer fluid and storage media used in CSP plants working at temperatures from 300°C to 600°C are reviewed in this paper. The studies found in the literature show that these mechanisms are influenced by the impurities present in the salt and the relation between Mg(NO3)2, moisture, CO2, perchlorates, and sulphates with the corrosion process. Corrosion mechanisms were identified along with a discussion of the corrosion products and their influence on the corrosion layers formed., The research leading to these results has received funding from Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER)). The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREiA (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Behaviour of a concrete wall containing micro‐encapsulated PCM after a decade of its construction

  • Cabeza, Luisa F.
  • Navarro Farré, Lidia
  • Pisello, Anna Laura
  • Olivieri, Lorenzo
  • Bartolomé, Cesar
  • Sánchez Sánchez, José
  • Álvarez Domínguez, Servando
  • Tenorio, José Antonio
Today, our society has the duty of reducing the energy consumed in the building sector. A promising technology to achieve this goal is the implementation of thermal energy storage (TES) solutions in buildings envelope. Lately, much literature dealing with the effect of the inclusion of latent heat storage materials in construction materials to provide higher thermal inertia has appeared, mostly focusing on the evaluation of the thermal properties, density, or porosity of these new materials. However, few of them evaluated the long stability properties of the materials with embedded PCM when included in a building, very much needed since the lifetime of a building is about 50 years. Therefore, in this study, an evaluation of a house‐like cubicle of concrete with micro‐encapsulated PCM after a decade of its construction is carried out. The results are compared to the tests done in 2005 concluding that the thermal performance of this cubicle presented no degradation in the PCM effect., The work partially funded by the Spanish Government (ENE2015‐64117‐C5‐1‐R (MINECO/FEDER), ULLE10‐4E‐1305, and ENE2005‐08256‐C02‐01). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2014 SGR 123) and the city hall of Puigverd de Lleida. GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. Financiado por el proyecto RTC‐2015‐3583‐5 (INPHASE) del Ministerio de Economía y Competitividad, dentro del Programa Estatal de Investigación, Desarrollo e Innovación Orientada a los Retos de la Sociedad, en el marco del Plan Estatal de Investigación Científica y Técnica y de Innovación 2013‐2016, y ha sido cofinanciado con FONDOS FEDER, con el objetivo de promover el desarrollo tecnológico, la innovación y una investigación de calidad.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

An argumentative approach for discovering relevant opinions in Twitter with probabilistic valued relationships

  • Alsinet, Teresa
  • Argelich Romà, Josep
  • Béjar Torres, Ramón
  • Fernàndez Camon, César
  • Mateu Piñol, Carles
  • Planes Cid, Jordi
Twitter is one of the most widely used social networks when it comes to sharing and criticizing relevant news and events. In order to understand the major opinions accepted and rejected in different domains by Twitter users, in a recent work we developed an analysis system based on valued abstract argumentation to model and reason about the social acceptance of tweets, considering different information sources from the social network. Given a Twitter discussion, the system outputs the set of accepted tweets from the discussion, considering two kinds of relationship between tweets: criticism and support. In this paper, we introduce and investigate a natural extension of the system, in which relationships between tweets are associated with a probability value, indicating the uncertainty that the relationships hold. An important element in our system is the notion of an uncertainty threshold, which characterizes how much uncertainty on probability values we are willing to tolerate: given an uncertainty threshold $\alpha$, we reject criticism and support relationships with probability below $\alpha$. We also extend our analysis system by incorporating support propagation when computing the social relevance of tweets. To this end, we extend the abstract argumentation framework with a new valuation function that propagates the support between tweets by taking into account not only the social relevance of tweets but also the probability that the support relationship holds, provided that it is above the specified uncertainty threshold $\alpha$. In order to test these new extensions, we analyze different Twitter discussions from the political domain. Our analysis shows that the social support of the accepted tweets is typically much stronger than the one for the rejected tweets. Also, the set of accepted tweets seems to be very stable with respect to changes to the social support of the tweets, and therefore even when considering support propagation we mainly observe differences in such set when using the more permissive probability thresholds., This work was partially funded by the Spanish MICINN Projects TIN2014-53234-C2-2- R, TIN2015-71799-C2-2-P and ENE2015-64117-C5-1- R. This research article has received a grant for its linguistic revision from the Language Institute of the University of Lleida (2017 call). The authors would like to thank anonymous reviewers for providing helpful comments to improve the paper.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

New formulation and characterization of enhanced bulk-organic phase change materials

  • Palacios, Anabel
  • Gracia Cuesta, Alvaro de
  • Cabeza, Luisa F.
  • Julià Bolivar, José Enrique
  • Fernández Renna, Ana Inés
  • Barreneche Güerisoli, Camila
The main drawbacks faced by researchers to successfully implement organic-PCM as materials to improve the thermal performance of building systems are their low thermal conductivity, their high flammability, and their low thermal cycling stability. T In the present work, authors present a new enhanced PCM formulations aimed to solve the stated disadvantages in organic bulk-PCM. The new enhanced PCM were prepared by adding high thermal conductivity particles and two kinds of flame retardants into organic PCM (paraffin and fatty acid eutectic mixtures). In the first stage, the effective thermal conductivity of organic-PCM was increased by using two different methods: directly dispersion of powder graphite (PG) bulk-PCM and vacuum impregnation of PCM into expanded graphite (EG). In the second stage, the fire reaction behaviour of the thermal conductivity enhanced PCM formulations was improved by adding two kind of flame retardant: magnesium hydroxide and ammonium phosphate (APP).. Their fire reaction behaviour, thermal conductivity and thermophysical properties were measured by adapting the dripping test (UNE 23727-90), the hot-wire method and Differential Scanning Calorimetry (DSC), respectively. The enhanced PCM composites show a self-extinguished behaviour in terms of fire performance mechanism. The EG working with endothermic and phosphates flame retardants improve the fire performance of PCM by acting as a synergic system and the thermal conductivity is increased. However, their thermal storage capacity is significant decreased due to the large amount of flame retardant added (up to 40%). The thermal reliability was also tested, the enhanced PCM composites were stable up to 1000 thermal cycles., The research leading to these results has received funding from the European Commission Seventh Framework Programme (FP/2007-2013) under grant agreement n° PIRSES-GA-2013-610692 (INNOSTORAGE) and from the European Union's Horizon 2020 research and innovation program under grant agreement No 657466 (INPATH-TES). The authors would like to thank the Catalan Government for the quality accreditation given to their research groups GREA (2014 SGR 123), DIOPMA (2014 SGR 1543) and GICITED (2014 SGR 1298). The work partially funded by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER), ENE2015-64117-C5-2-R(MINECO/FEDER), and ENE2015-64117-C5-3-R(MINECO/FEDER)). Dr. Alvaro de Gracia and Dr. Camila Barreneche would like to thank Ministerio de Economia y Competitividad de España for Grant Juan de la Cierva, FJCI-2014-19940 and FJCI-2014-22886, respectively.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Multi-objective optimisation of bio-based thermal insulation materials in building envelopes considering condensation risk

  • Torres Rivas, Alba
  • Palumbo, Mariana
  • Haddad, Assed Naked
  • Cabeza, Luisa F.
  • Jiménez, Laureano
  • Boer, Dieter
The reduction in energy demand for heating and cooling with insulation materials increases the material related environmental impact. Thus, implementing low embodied energy materials may equilibrate this trade-off. Actual trends in passive house postulate bio-based materials as an alternative to conventional ones. Despite that, the implementation of those insulators should be carried out with a deeper analysis due to their hygroscopic properties. The moisture transfer, the associated condensation risk and the energy consumption for seven biobased materials and polyurethane for a building-like cubicle are analysed. The performance is evaluated combining a software application to model the cubicle (EnergyPlus) and a tool to optimize its performance (jEPlus). The novelty of this optimization approach is to include and evaluate the effects of moisture in these insulation materials, taking into account the mass transfer through the different layers and the evaporation of the different materials. This methodology helps optimise the insulation type and thickness verifying the condensation risk, preventing the deterioration of the materials. The total cost of the different solutions is quantified, and the environmental impact is determined using the life cycle assessment methodology. The effect of climate conditions and the envelope configuration, as well as the risk of condensation, are quantified. The results show that cost and environmental impact can be reduced if bio-based materials are used instead of conventional ones, especially in semiarid climates. Condensation risk occurs for large thicknesses and in humid climates. In our case studies, hemp offered the most balanced solution., The authors would like to acknowledge financial support from the Spanish Government (CTQ2016-77968-C3-1-P, ENE2015-64117-C5-1-R, ENE2015-64117-C5-3-R, MINECO/FEDER, UE). The research leading to these results has received funding from the European Commission Seventh Framework Programme under grant agreement no. PIRSES-GA-2013-610692 (INNOSTORAGE). This project has received funding the European Union's Horizon 2020 Research and Innovation Program under grant agreement No 657466 (INPATH-TES). This article has been possible with the support of the Ministerio de Economía y Competitividad (MINECO) and the Universitat Rovira i Virgili (URV) (FJCI-2016-28789). Authors would like to acknowledge the Brazilian Government for their support by the CNPq (National Council for Scientific and Technological Development). M.P. would like to thank the Brazilian Education Ministry for the financial support received under the PNPD/Capes fellowship. L.F.C. would like to thank the Catalan Government for the quality accreditation given to her research group GREA (2014 SGR 123).
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

The rise of machine learning for detection and classification of malware: Research developments, trends and challenge

  • Gibert Llauradó, Daniel
  • Mateu Piñol, Carles
  • Planes Cid, Jordi
The struggle between security analysts and malware developers is a never-ending battle with the complexity of malware changing as quickly as innovation grows. Current state-of-the-art research focus on the development and application of machine learning techniques for malware detection due to its ability to keep pace with malware evolution. This survey aims at providing a systematic and detailed overview of machine learning techniques for malware detection and in particular, deep learning techniques. The main contributions of the paper are: (1) it provides a complete description of the methods and features in a traditional machine learning workflow for malware detection and classification, (2) it explores the challenges and limitations of traditional machine learning and (3) it analyzes recent trends and developments in the field with special emphasis on deep learning approaches. Furthermore, (4) it presents the research issues and unsolved challenges of the state-of-the-art techniques and (5) it discusses the new directions of research. The survey helps researchers to have an understanding of the malware detection field and of the new developments and directions of research explored by the scientific community to tackle the problem., This research has been partially funded by the Spanish MICINN Projects TIN2015-71799-C2-2-P, ENE2015-64117-C5-1-R, and is supported by the University of Lleida. This research article has received a grant (2019 call) from the University of Lleida Language Institute to review the English.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Modelling a grading scheme for peer-to-peer accommodation: Stars for Airbnb

  • Martín Fuentes, Eva
  • Fernàndez Camon, César
  • Mateu Piñol, Carles
  • Mariné Roig, Estela
This study aims, firstly, to determine whether hotel categories worldwide can be inferred from features that are not taken into account by the institutions in charge of assigning such categories and, if so, to create a model to classify the properties offered by P2P accommodation platforms, similar to grading scheme categories for hotels, thus preventing opportunistic behaviours of information asymmetry and information overload. The characteristics of 33,000 hotels around the world and 18,000,000 reviews from Booking.com were collected automatically and, using the Support Vector Machine classification technique, we trained a model to assign a category to a given hotel. The results suggest that a hotel classification can usually be inferred by different criteria (number of reviews, price, score, and users’ wish lists) that have nothing to do with the official criteria. Moreover, room prices are the most important feature for predicting the hotel category, followed by cleanliness and location., This work was partially funded by the Spanish Ministry of the Economy and Competitiveness: research project TIN2015-71799-C2-2-P and ENE2015-64117-C5-1-R. This research article has received a grant for its linguistic revision from the Language Institute of the University of Lleida (2017 call).
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Estimating the industrial waste heat recovery potential based on CO2 emissions in the European non-metallic mineral industry

  • Miró, Laia
  • McKenna, Russell
  • Jäger, Tobias
  • Cabeza, Luisa F.
Industrial waste heat (IWH) is a key strategy to improve energy efficiency and reduce CO2 emissions in the industry. But its potential for different countries remains unclear due to a non-existent or inconsistent data basis. The objective of this paper is to assess the IWH potential of the European non-metallic mineral industry, using databases which comprise CO2 emissions of more than 400 industrial sites as well as country- and sector-specific parameters. This sector is selected because of its homogenous nature, meaning that most sites carry out similar or the same processes, which facilitates site-level modelling with subsector-level assumptions. The bottom-up approach is employed to derive the IWH potential for this industry over the period 2007–2012. Average results in this period show an IWH potential per site of 0.33 PJ/a and a potential for the whole sector of 134 PJ/a. The countries with the largest IWH potentials are Germany, Italy, France and Spain with yearly average potentials of 23, 19, 17 and 16 PJ, respectively. The subsector with the most IWH potential is cement. Further work should focus on the improvement of methodologies to assess the IWH potential, in particular through a techno-economic assessment of links between IWH sources and potential sinks., The work is partially funded by the Spanish Government (ENE2015-64117-C5-1-R (MINECO/FEDER)). This project has received funding from the European Commission Seventh Framework Programme (FP/2007-2013) under Grant Agreement No PIRSES-GA-2013-610692 (INNOSTORAGE) and from the European Union’s Horizon 2020 Research and Innovation programme under Grant Agreement No 657466 (INPATH-TES).
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Inter-building assessment of urban heat island mitigation strategies: Field tests and numerical modelling in a simplified-geometry experimental set-up

  • Pigliautile, Ilaria
  • Chàfer, Marta
  • Pisello, Anna Laura
  • Pérez Luque, Gabriel
  • Cabeza, Luisa F.
Large scale mitigation strategies showed to represent promising solutions for enhancing liveability in dense urban contexts. Therefore, most of the researches are focused on assessing the effect of high albedo surfaces and greenery. The paper deals with a numerical and experimental analysis of these evapotranspiration and high-reflectance surfaces in a full scale experimental set-up where more than 20 cubicles are monitored in a Mediterranean continental climate. The experimental set-up itself covers an intermediate inter-building perspective between the lab scale and the real urban contexts, which compromises the possibility to generalize final results. This scale is able to better control geometry of area, but allows real microclimate monitoring and calibration of CFD models. Starting from a validated model, this study simulated alternative scenarios with gradually varying the presence of common mitigation strategies with the scope to evaluate their effect to this aim. Results showed that high albedo solutions best mitigate summer overheating reducing the air temperature, while greenery was more effective in the densest configurations with low albedo envelopes, showing how geometry related variables may play a key role in determining the optima configurations of microclimate mitigation strategies, also important for the best exploitation of renewables in the built environment., The work is partially funded by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER) and ULLE10-4E-1305) and SOS CITTA’ (Fondazione Cassa di Risparmio di Perugia, (2018.0499.026). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537) and the city hall of Puigverd de Lleida. GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. Marta Chàfer would like to thank the program Spanish Universities for EU Projects from Campus Iberus for the mobility scholarship. Ilaria Pigliautile would like to acknowledge the PhD Course of Energy and Sustainable development at University of Perugia and H2CU centre for supporting her international activities and scientific collaborations during the course of her PhD. The authors from University of Perugia also thank UNESCO Chair on “Water Resources Management and Culture”, and the Honors Centre of Italian Universities (H2CU) for supporting their studies on wellbeing.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Characterization of wastes based on inorganic double salt hydrates as potential thermal energy storage materials

  • Gutiérrez, Andrea
  • Ushak, Svetlana
  • Mamani, Veronica
  • Vargas, Pedro
  • Barreneche Güerisoli, Camila
  • Cabeza, Luisa F.
  • Grágeda, Mario
Thermal energy storage (TES) is seen today as a key technology to reduce the existing gap between energy demand and energy supply in many energy systems. There are, currently, three well known methods to store thermal energy and they are: sensible heat storage (SHS), latent heat storage (LHT) and thermochemical heat storage. Every method has its own thermophysical requirements for the mediums of storage, such as thermal stability, high enthalpy of phase change or reaction, high heat capacity and suitable temperature of the thermal phenomenon for a respective application, among others. In this regard, the composition of materials usually needs to be modified in order to improve their performance or to reach a determined requirement. As a consequence, the costs of potential TES materials to be applied in renewable energy systems are too high to compete with traditional systems using fossil fuels. On the other hand, several wastes and by-products from the nonmetallic mining, such as salt hydrates and double salts, are available without any application but accumulating in the mining sites. This is the case for astrakanite (Na2SO4·MgSO4·4H2O) and lithium carnallite (LiCl·MgCl2·7H2O) with no current application, and potassium carnallite (KCl·MgCl2·6H2O) used as a supplementary raw material to obtain KCl. Since the costs of these materials are close to zero, they were characterized as TES materials taking into account the properties required for the three methods of storage. Results showed that astrakanite and potassium carnallite have potential to be applied as thermochemical material at lowmedium temperature (< 300 °C). Also, a dehydrated product obtained from astrakanite showed potential to be applied as phase change material (PCM) at high temperature, from 550 °C to 750 °C. Nevertheless, lithium carnallite did not show potential to be applied as TES material due to it low thermal stability, presenting partial decomposition below 200 °C., The work at the University of Antofagasta was supported by CONICYT/FONDAP N° 15110019, FONDECYT N°1170675 and partially, by ERANet-LAC 2nd Joint Call, ERANET-LAC 2015–2016, project ELAC2015/T06-0988. Veronica Mamani Barreneche would like to thank CONICYT for her doctorate scholarship CONICYT N° 21150145. The authors from the University of Lleida and the University of Barcelona would like to thank the Catalan Government for the quality accreditation given to their research group GREA (2014 SGR 123) and DIOPMA (2014 SGR 1543), respectively. The work was partially funded by the Spanish Government (ENE2015-64117-C5-1-R (MINECO/FEDER)). This work has received funding from the European Commission Seventh Framework Programme (FP/2007–2013) under Grant agreement N°PIRSES-GA-2013-610692 (INNOSTORAGE) and from the European Union's Horizon 2020 research and innovation programme under grant agreement No 657466 (INPATH-TES). Dr. Camila Barreneche would like to thank Ministerio de Economia y Competitividad de España for grant Juan de la Cierva, FJCI-2014-22886.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Benchmarking of useful phase change materials for a building application

  • Navarro, Lidia
  • Solé, Aran
  • Martín, Marc
  • Barreneche, Camila
  • Olivieri, Lorenzo
  • Tenorio Ríos, José Antonio
  • Cabeza, Luisa F.
Nowadays, there is an increasing interest in more efficient building materials and new technologies to accomplish the objectives defined by energy policies. The combination of energy efficient building designs and integration of renewable energies makes the use of thermal energy storage (TES) necessary. Within this context, the improvement of building envelopes by the use of phase change materials (PCM) has been widely studied. The PCM selection should fulfil the requirements of the specific application. In this study, a benchmarking of PCM available in the market was performed to undertake a material selection for a specific building application. The incorporation of PCM into a radiant wall technology present several requirements with especial interest on long-term thermal stability. A complete laboratory-scale characterization has been carried out considering the following properties: temperature of phase change, specific heat capacity, thermal conductivity, and stability., Financiado por el proyecto RTC-2015-3583-5 (INPHASE) del Ministerio de Economía y Competitividad, dentro del Programa Estatal de Investigación, Desarrollo e Innovación Orientada a los Retos de la Sociedad, en el marco del Plan Estatal de Investigación Científica y Técnica y de Innovación 2013–2016, y ha sido cofinanciado con FONDOS FEDER, con el objetivo de promover el desarrollo tecnológico, la innovación y una investigación de calidad. The work is partially funded by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER) and ENE2015-64117-C5-2-R (MINECO/FEDER)). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537 and 2017 SGR 188). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. Camila Barreneche would like to thank ACCIO for her Grant TecnioSpring Plus TECSPR17-1-0071. Aran Solé would like to thank Ministerio de Economia y Competitividad de España for Grant Juan de la Cierva FJCI-2015-25741., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Micro-encapsulated PCM in concrete matrix after a decade of the building construction

  • Olivieri, Lorenzo
  • Tenorio Ríos, José Antonio
Trabajo presentado a la 14th International Energy Storage Conference (EnerSTOCK), celebrada en la Universidad de Çukurova (Turquía) del 25 al 28 de abril de 2018., The reduction of the energy consumed in the building sector is no more a recommendation, but a duty of our society. Thermal energy storage (TES) implementation into buildings envelope has been highlighted as a promising technology to reduce the energy demand in buildings. Last decade, many literature have been dealing with the effect of the inclusion of latent heat storage materials in construction materials to provide higher thermal inertia. Several studies focused on the evaluation of the thermal properties, density, or porosity of these new materials. However, few of them focused on the long stability properties of the materials with embedded PCM when included in a building, since the lifetime of a building last around 50 years. In this study, an evaluation of a house-like cubicle of concrete with micro-encapsulated PCM after a decade of its construction is done. The results of this study were compared to the tests done in 2005 concluding that the thermal performance of this cubicle presented no degradation in the PCM effect., The work partially funded by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER), ENE2015-64117-C5-3-R (MINECO/FEDER), ULLE10-4E-1305, and ENE2005-08256-C02-01). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2014 SGR 123) and the city hall of Puigverd de Lleida. GREA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 657466 (INPATH-TES). Financiado por el proyecto RTC-2015-3583-5 (INPHASE) del Ministerio de Economía y Competitividad, dentro del Programa Estatal de Investigación, Desarrollo e Innovación Orientada a los Retos de la Sociedad, en el marco del Plan Estatal de Investigación Científica y Técnica y de Innovación 2013-2016, y ha sido cofinanciado con FONDOS FEDER, con el objetivo de promover el desarrollo tecnológico, la innovación y una investigación de calidad.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Behaviour of a concrete wall containing micro‐encapsulated PCM after a decade of its construction

  • Cabeza, Luisa F.
  • Navarro, Lidia
  • Pisello, Ana Laura
  • Olivieri, Lorenzo
  • Bartolomé, Cesar
  • Sánchez, José
  • Álvarez, Servando
  • Tenorio Ríos, José Antonio
Today, our society has the duty of reducing the energy consumed in the building sector. A promising technology to achieve this goal is the implementation of thermal energy storage (TES) solutions in buildings envelope. Lately, much literature dealing with the effect of the inclusion of latent heat storage materials in construction materials to provide higher thermal inertia has appeared, mostly focusing on the evaluation of the thermal properties, density, or porosity of these new materials. However, few of them evaluated the long stability properties of the materials with embedded PCM when included in a building, very much needed since the lifetime of a building is about 50 years. Therefore, in this study, an evaluation of a house‐like cubicle of concrete with micro‐encapsulated PCM after a decade of its construction is carried out. The results are compared to the tests done in 2005 concluding that the thermal performance of this cubicle presented no degradation in the PCM effect., The work partially funded by the Spanish Government (ENE2015‐64117‐C5‐1‐R (MINECO/FEDER), ULLE10‐4E‐1305, and ENE2005‐08256‐C02‐01). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2014 SGR 123) and the city hall of Puigverd de Lleida. GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. Financiado por el proyecto RTC‐2015‐3583‐5 (INPHASE) del Ministerio de Economía y Competitividad, dentro del Programa Estatal de Investigación, Desarrollo e Innovación Orientada a los Retos de la Sociedad, en el marco del Plan Estatal de Investigación Científica y Técnica y de Innovación 2013‐2016, y ha sido cofinanciado con FONDOS FEDER, con el objetivo de promover el desarrollo tecnológico, la innovación y una investigación de calidad., Peer reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Process integration of thermal energy storage systems – Evaluation methodology and case studies

  • Gibb, Duncan
  • Johnson, Maike
  • Romaní Picas, Joaquim
  • Gasia, Jaume
  • Cabeza, Luisa F.
  • Seitz, Antje
As a key tool for decarbonization, thermal energy storage systems integrated into processes can address issues related to energy efficiency and process flexibility, improve utilization of renewable energy resources and thus reduce greenhouse gas emissions. However, integration of these systems is dominated by the variety of potential processes in which the storage technologies can be deployed as well as the various benefits they deliver. Therefore, the requirements for thermal energy storage systems vary greatly depending on the chosen application, just as the systems themselves have different capabilities depending on their technical principles. This paper addresses this issue by developing a systematic methodology that approaches the challenge of characterizing and evaluating thermal energy storage systems in different applications in three concrete steps. To begin, a set of guidelines for process analysis has been created to disclose process requirements for storage integration. The methodology continues by explicitly defining the system boundary of a thermal energy storage system, as well as addressing technical and economic parameters. Finally, the approach concludes by determining the benefit of an integrated thermal energy storage system to an application and examines how key performance indicators vary based on the perspectives of different stakeholders. Within this work, the methodology is then applied to two case studies of high-temperature storage in concentrating solar power and cogeneration plants. Also introduced are the concepts of retrofit and greenfield applications, which are used to clarify differences between integrated storage systems. The paper shows how such a systematic approach can be used to consistently analyse processes for storage integration, facilitate comparison between thermal energy storage systems integrated into processes across applications and finally grasp how different interests perceive the benefits of the integrated storage system. This type of systematic methodology for technology integration has not been previously developed and as such, is a novel and important contribution to the thermal energy storage community. In the long term, this work builds the basis for a discussion on benefits of thermal energy storage system integration with diverse stakeholders including storage system designers, process owners and policy makers., This work has been partially funded by the German Federal Ministry of Economic Affairs and Energy in the framework of the TESIN project (03ESP011) and the THESAN project (03ET1297). This work has also been partially funded by the Ministerio de Economía y Competitividad de España (ENE2015-64117-C5-1-R (MINECO/FEDER)). The authors at the University of Lleida would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. Jaume Gasia would like to thank the Departament d'Universitats, Recerca i Societat de la Informació de la Generalitat de Catalunya for his research fellowship (2018 FI_B2 00100). The authors are responsible for the content of this publication.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Behaviour of a concrete wall containing micro‐encapsulated PCM after a decade of its construction

  • Cabeza, Luisa F.
  • Navarro Farré, Lidia
  • Pisello, Anna Laura
  • Olivieri, Lorenzo
  • Bartolomé, Cesar
  • Sánchez Sánchez, José
  • Álvarez Domínguez, Servando
  • Tenorio, José Antonio
Today, our society has the duty of reducing the energy consumed in the building sector. A promising technology to achieve this goal is the implementation of thermal energy storage (TES) solutions in buildings envelope. Lately, much literature dealing with the effect of the inclusion of latent heat storage materials in construction materials to provide higher thermal inertia has appeared, mostly focusing on the evaluation of the thermal properties, density, or porosity of these new materials. However, few of them evaluated the long stability properties of the materials with embedded PCM when included in a building, very much needed since the lifetime of a building is about 50 years. Therefore, in this study, an evaluation of a house‐like cubicle of concrete with micro‐encapsulated PCM after a decade of its construction is carried out. The results are compared to the tests done in 2005 concluding that the thermal performance of this cubicle presented no degradation in the PCM effect., The work partially funded by the Spanish Government (ENE2015‐64117‐C5‐1‐R (MINECO/FEDER), ULLE10‐4E‐1305, and ENE2005‐08256‐C02‐01). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2014 SGR 123) and the city hall of Puigverd de Lleida. GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. Financiado por el proyecto RTC‐2015‐3583‐5 (INPHASE) del Ministerio de Economía y Competitividad, dentro del Programa Estatal de Investigación, Desarrollo e Innovación Orientada a los Retos de la Sociedad, en el marco del Plan Estatal de Investigación Científica y Técnica y de Innovación 2013‐2016, y ha sido cofinanciado con FONDOS FEDER, con el objetivo de promover el desarrollo tecnológico, la innovación y una investigación de calidad.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Critical analysis of the T-history method: A fundamental approach

  • Badenhorst, Heinrich
  • Cabeza, Luisa F.
Energy storage is a key challenge to a sustainable energy supply. To design new storage systems accurateand representative thermal property measurements are essential. The T-history method is quick anduncomplicated, however numerous adaptations have been proposed over the years. In this study thesemethods have been classified and critically assessed based on their mathematical formulation and exper-imental configuration. They can be broadly categorized according to one of three assumptions regardingthe heat transfer coefficient for natural convection: it is constant either as a function of time or tem-perature, or it is negligible. This work proves in addition that the heat transfer coefficient for naturalconvection, varies both as a function of time and temperature. This is demonstrated both experimentallyand through rigorous simulation of the proposed configurations. Thus T-history methods which show themost promise for precise and unambiguous measurements eliminate convection by making conductionthe dominant thermal resistance in the system. These techniques can be tailored to different materialsand do not require a simultaneous reference due to the use of a rigorous fundamental model comparedto the lumped parameter approximation. The addition of heat flux sensors to quantify actual heat lossesis recommended for absolute measurement certainty., The research leading to these results has received funding from the European Commission Seventh Framework Programme (FP/2007-2013) and under Grant agreement N°PIRSES-GA-2013-610692 (INNOSTORAGE), and from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 657466 (INPATH-TES). The work is partially funded by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER)). Dr. Luisa F. Cabeza would like to thank the Catalan Government for the quality accreditation given to the research group GREA (2014 SGR 123).
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

The more the merrier? Number of reviews versus score on TripAdvisor and Booking.com

  • Martín Fuentes, Eva
  • Mateu Piñol, Carles
  • Fernàndez Camon, César
The aim of this research is to confirm whether there is a relationship between the number of reviews and the hotel’s score on Booking.com and TripAdvisor and whether the relationship is different depending on the geographical area. Moreover, the study endeavors to confirm whether the number of reviews influences the score on each website. With the analysis of about 13,899 hotels in 146 cities, our findings suggest that there is some lineal relationship between the amount of reviews and the score on TripAdvisor but not on Booking.com. Moreover, by regions on TripAdvisor hotels from Middle East and Africa and Asia and Pacific have a stronger relationship between reviews and score than those from Europe and America., This work was partially funded by the Spanish Ministry of the Economy, INDUSTRY and Competitiveness [grant number TIN2015-71799-C2-2-P], [grant number ECO2017-88984-R] and [grant number ENE2015-64117-C5-1-R]. This research article has received a grant for its linguistic revision from the Language Institute of the University of Lleida (2016 call).
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Advanced Concrete Steam Accumulation Tanks for Energy Storage for Solar Thermal Electricity

  • Prieto, Cristina
  • Pérez Osorio, David
  • Gonzalez-Roubaud, Edouard
  • Fereres, Sonia
  • Cabeza, Luisa F.
Steam accumulation is one of the most effective ways of thermal energy storage (TES) for the solar thermal energy (STE) industry. However, the steam accumulator concept is penalized by a bad relationship between the volume and the energy stored; moreover, its discharge process shows a decline in pressure, failing to reach nominal conditions in the turbine. From the economic point of view, between 60% and 70% of the cost of a steam accumulator TES is that of the pressure vessel tanks (defined as US$/kWhth). Since the current trend is based on increasing hours of storage in order to improve dispatchability levels in solar plants, the possibility of cost reduction is directly related to the cost of the material of pressure vessels, which is a market price. Therefore, in the present paper, a new design for steam accumulation is presented, focusing on innovative materials developed specifically for this purpose: two special concretes that compose the accumulation tank wall. Study of dosages, selection of materials and, finally, scale up on-field tests for their proper integration, fabrication and construction in prototype are the pillars of this new steam accumulation tank. Establishing clear and precise requirements and instructions for successful tank construction is necessary due to the highly sensitive and variable nature of those new concrete formulations., The research leading to these results has received funding from CDTI in the project Innterconecta Thesto (ITC-20111050). The work is partially funded by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER)). This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31—MCIU/AEI/FEDER, UE) and by the Ministerio de Ciencia, Innovación y Universidades—Agencia Estatal de Investigación (AEI) (RED2018-102431-T). This work is partially supported by ICREA under the ICREA Academia programme. Acknowledgments The authors would like to thank all the Chirivo Construcciones, Hormigones Aznalcóllar, Elabora, Azcatec, Next Force Engineering, Universidad de Granada, Aidico, Centro Andaluz de Metrología, AICIA and Abengoa teams involved in Solúcar Platform during prototype construction and start-up. Cabeza would like to thank the Catalan Government for the quality accreditation given to her research group GREiA (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Does verifying users influence rankings? Analyzing TripAdvisor and Booking.com

  • Martín Fuentes, Eva
  • Mateu Piñol, Carles
  • Fernàndez Camon, César
Electronic word of mouth (eWOM) is of recent and considerable importance in tourism, particularly because of the intangible nature of this industry. Users' online reviews are a source of information for other consumers, who take them into account before making a reservation at a lodging property. The aim of this study is to establish whether or not the anonymity of the reviews on TripAdvisor alters hotel rankings by comparing them with verified users' reviews on Booking.com. Moreover, the study analyzes whether or not the differences in the rating scales of both websites favor some hotels over others. Big data is used in this study, with more than 40,000 hotels on Booking.com and 70,000 on TripAdvisor in 447 cities around the world, and compares the rankings of about 20,000 hotels matched on both websites. Our findings suggest that the behavior of both rankings is similar and the lack of veracity on TripAdvisor due to the anonymity in the user's verification system is baseless. In addition, some differences are found depending on the hotel category and region, due mainly to the unique rating scale on Booking.com (from 2.5 to 10), as compared to the rating scale on TripAdvisor (from 1 to 5)., This work was partially funded by the Spanish Ministry of the Economy and Competitiveness: research project TIN2015-71799-C2-2-P and ENE2015-64117-C5-1-R. This research article has received a grant for its linguistic revision from the Language Institute of the University of Lleida (2016 call).
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Benchmarking of energy demand of residential buildings

  • Coma Arpón, Julià
  • Maldonado, José Miguel
  • Gracia Cuesta, Alvaro de
  • Gimbernat, Toni
  • Botargues, Teresa
  • Cabeza, Luisa F.
Solar thermal energy has been adopted in medium and long‐term energy strategies within EU countries for increasing the energy efficiency of buildings. In this context, the overall objective of this project consists in developing an innovative high performance and cost effective hybrid system (solar heat and electrical power). The initial application is to be implemented in residential buildings for on‐site electricity and heat generation using solar thermal energy. The proposed technology is expected to deliver 60% of domestic energy requirements (heating and domestic hot water) and provide 20% reduction in energy costs and greenhouse gas emissions compared to the best existing low carbon energy technologies. A benchmark on the energy demand for the different types of residential buildings in Europe serves as reference scenario to evaluate the potential applicability of the different existing renewable technologies and to establish a comparative framework in terms of quantitative values. Thus, the specific aim of this study consists in performing a state‐of‐the‐art on the different building typologies, which can host this technology, and their energy demands for heating and domestic hot water, as well as their associated CO2 emissions., This study has received funding from European Union’s Horizon 2020 research and innovation programme under grant agreement Nº723596 (Innova MicroSolar) and Nº 657466 (INPATH‐TES). The work is partially funded by the Spanish government ENE2015‐64117‐ C5‐1‐R (MINECO/FEDER) and ENE2015‐64117‐C5‐3‐R (MINECO/FEDER). GREA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2014 SGR 123). Alvaro de Gracia would like to thank Ministerio de Economía y Competitividad de España for Grant Juan de la Cierva, FJCI‐2014‐19940.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Enhancing the insertion of NOP instructions to obfuscate malware via deep reinforcement learning

  • Gibert Llauradó, Daniel
  • Fredrikson, Matt
  • Mateu Piñol, Carles
  • Planes Cid, Jordi
Current state-of-the-art research for tackling the problem of malware detection and classification is centered on the design, implementation and deployment of systems powered by machine learning because of its ability to generalize to never-before-seen malware families and polymorphic mutations. However, it has been shown that machine learning models, in partidular deep neural networks, lack robustness against crafted inputs (adversarial examples). In this work, we have investigated the vulnerability of a state-of-the-art shallow convolutional neural network malware classifier against the deat code insertion technique. We propose a general framework powered by a Double Q-network to induce misclassification over malware families. The framework trains an agent through a convolutional neural network to select the optimal positions in a code sequence to insert dead code instructions so that the machine learning classifier mislabels the resulting executable. The experiments show that the proposed method significantly drops the classification accuracy of the classifier to 56.53% while having an evasion rate of 100% for the samples belonging to Kelihos_ver3, Simda, and Kelihos_ver1 families. In addition, the average number of instructions needed to mislabel malware in comparison to a random agent decreased by 33%., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 847402. This research has been partially funded by the Spanish MICINN Projects TIN2015-71799-C2-2-P, ENE2015-64117-C5-1-R, PID2019-111544GB-C22, and supported by the University of Lleida.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Phase Change Material Selection for Thermal Energy Storage at High Temperature Range between 210 ºC and 270 ºC

  • Maldonado, José Miguel
  • Fullana Puig, Margalida
  • Martín, Marc
  • Solé, Aran
  • Fernández, Ángel G.
  • Gracia Cuesta, Alvaro de
  • Cabeza, Luisa F.
The improvement of thermal energy storage systems implemented in solar technologies increases not only their performance but also their dispatchability and competitiveness in the energy market. Latent heat thermal energy storage systems are one of those storing methods. Therefore, the need of finding the best materials for each application becomes an appealing research subject. The main goal of this paper is to find suitable and economically viable materials able to work as phase change material (PCM) within the temperature range of 210-270 ºC and endure daily loading and unloading processes in a system with Fresnel collector and an organic Rankine cycle (ORC). Twenty-six materials have been tested and characterized in terms of their thermophysical conditions, thermal and cycling stability, and health hazard. Two materials out of the 26 candidates achieved the last stage of the selection process. However, one of the two finalists would require an inert working atmosphere, which would highly increase the cost for the real scale application. This leads to a unique suitable material, solar salt (40 wt % KNO3/60 wt % NaNO3)., This work was partially funded by the European Union’s Horizon 2020 Research & Innovation Programme under Grant Agreement 723596 with reference name Innova MicroSolar. This work was partially funded by the Ministerio de Economía y Competitividad de España (ENE2015-64117-C5-1-R (MINECO/FEDER) and ENE2015-64117-C5-3-R (MINECO/FEDER)). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. José Miguel Maldonado would like to thank the Spanish Government for his research fellowship (BES-2016-076554). Aran Solé would like to thank Ministerio de Economía y Competitividad de España for Grant Juan de la Cierva, FJCI-2015-25741. Alvaro de Gracia has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 712949. Angel G. Fernández would like to acknowledge the financial support provided by GIZ “Programa de pasantía en el extranjero en tecnologías de concentración solar para investigadores” and CONICYT/FONDAP 15110019 “Solar Energy Research Center” SERC-Chile.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Geometry optimization of a heat storage system for concentrated solar power plants (CSP)

  • Solé, Aran
  • Falcoz, Quentin
  • Cabeza, Luisa F.
  • Neveu, Pierre
In the present study, geometry optimization of a phase change material (PCM) heat storage system is presented. The existing PCM-fins heat exchanger system works at the back side of a solar receiver in order to minimize the effect of the solar radiation fluctuations inside the cavity. As initially designed, the system does not accomplish the expected design purposes and thus optimization is needed. Optimization is usually time-consuming and some algorithms need a starting point, therefore one suitable method is geometrical optimization which aims to find the optimal shape of a system for a given criteria and providing a rough optimal geometry. Here, constructal theory, 'point to volume', is applied to find the optimum shape factor of the elemental volume of the presented PCM-heat exchanger. With this methodology, an optimum ratio of the PCM and fin width and length is found and beyond that the method is extended to 'surface to volume' problem. Results have been numerically validated using a CFD software and demonstrate that it gives a very good approximation of the real optimum which can be used as initial configuration for further optimization through CFD simulation or other optimization methods that require a starting point., The author Aran Solé would like to thank the Societat Economica Barcelonesa Amics del Pais (SEBAP) for the funds that made possible her research stay. The authors would like to thank Jean-Marie Mancaux for his help and Jinqiu Shen for her contribution in the work. The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREA (2014 SGR 123). GREA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. The work is partially funded by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER)). The research leading to these results has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 657466 (INPATH-TES). Aran Solé would like to thank Ministerio de Economía y Competitividad de España for Grant Juan de la Cierva, FJCI-2015-440 25741.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Study of the Thermal Properties and the Fire Performance of Flame Retardant-Organic PCM in Bulk Form

  • Palacios, Anabel
  • Gracia Cuesta, Alvaro de
  • Haurie, Laia
  • Cabeza, Luisa F.
  • Fernández Renna, Ana Inés
  • Barreneche Güerisoli, Camila
The implementation of organic phase change materials (PCMs) in several applications such as heating and cooling or building comfort is an important target in thermal energy storage (TES). However, one of the major drawbacks of organic PCMs implementation is flammability. The addition of flame retardants to PCMs or shape-stabilized PCMs is one of the approaches to address this problem and improve their final deployment in the building material sector. In this study, the most common organic PCM, Paraffin RT-21, and fatty acids mixtures of capric acid (CA), myristic acid (MA), and palmitic acid (PA) in bulk, were tested to improve their fire reaction. Several flame retardants, such as ammonium phosphate, melamine phosphate, hydromagnesite, magnesium hydroxide, and aluminum hydroxide, were tested. The properties of the improved PCM with flame retardants were characterized by thermogravimetric analyses (TGA), the dripping test, and differential scanning calorimetry (DSC). The results for the dripping test show that fire retardancy was considerably enhanced by the addition of hydromagnesite (50 wt %) and magnesium hydroxide (50 wt %) in fatty acids mixtures. This will help the final implementation of these enhanced PCMs in building sector. The influence of the addition of flame retardants on the melting enthalpy and temperatures of PCMs has been evaluated., The research leading to these results has received funding from the European Commission Seventh Framework Programme (FP/2007-2013) under grant agreement number PIRSES-GA-2013-610692 (INNOSTORAGE) and from the European Union’s Horizon 2020 research and innovation program under grant agreement No. 657466 (INPATH-TES). The authors would like to thank the Catalan Government for the quality accreditation given to their research groups GREA (2014 SGR 123), DIOPMA (2014 SGR 1543) and GICITED (2014 SGR 1298), and also the MINECO for the project BIA2014-52688-R, ENE2015-64117-C5-1-R, ENE2015-64117-C5-2-R, and ENE2015-64117-C5-3-R. Alvaro de Gracia and Camila Barreneche would like to thank Ministerio de Economia y Competitividad de España for Grant Juan de la Cierva, FJCI-2014-19940 and FJCI-2014-22886, respectively.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Rammed earth walls in Mediterranean climate: material characterization and thermal behaviour

  • Serrano, Susana
  • Rincón, Lídia
  • González, Belen
  • Navarro Ezquerra, Antonia
  • Bosch, Montserrat
  • Cabeza, Luisa F.
Rammed earth is considered a very sustainable construction system due to its low embodied energy, long service life and high recyclability. However, authors found that there is a lack of experimental results at real scale regarding rammed earth thermal behaviour. For this reason, this paper is first focused on the characterization of two different types of earth in order to check the suitability of being used in rammed earth walls. After the characterization, two experimental cubicle-shape buildings were built in Barcelona and Puigverd de Lleida (Spain) in order to test the thermal behaviour of their walls in two different climatic conditions. Temperature profiles inside walls have been monitored using thermocouples and temperature profile of southern walls was analysed in free floating conditions during summer and winter periods of 2013. Results show that thermal amplitude from outside to inside temperatures are decreased by rammed earth walls, achieving constant temperatures in inner surface of southern walls., The work was partially funded by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER)), in collaboration with the City Hall of Puigverd de Lleida. The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2014 SGR 123). This project has received funding from the European Commission Seventh Framework Programme (FP/2007-2013) under Grant agreement Nº PIRSES-GA-2013-610692 (INNOSTORAGE) and from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 657466 (INPATH-TES). Barcelona cubicle has been conducted under the direction of the company Casa S-Low, with the collaboration of Luis Allepuz y Cristian Poza in their final degree project at EPSEB (UPC).