Skip to main content

UTILIZACION DE MEDULA VEGETAL PARA LA MEJORA DEL COMPORTAMIENTO HIGROTERMICO DE LOS EDIFICIOS

BIA2014-52688-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2014
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Use of multi-layered PCM gypsums to improve fire response. Physical, thermal and mechanical characterization

  • Serrano, Susana
  • Barreneche Güerisoli, Camila
  • Navarro Ezquerra, Antonia
  • Haurie, Laia
  • Fernández Renna, Ana Inés
  • Cabeza, Luisa F.
The building sector is one of the highest energy consumers representing around 30% of total energy use. One of the recommendations of the IEA (International Energy Agency) to reduce energy consumption in buildings is to enhance the thermal performance of building envelopes. In the present study, PCM (Phase Change Material) gypsum materials have been manufactured using three different PCM inclusion methods and a thin layer of gypsum without PCM is added as external layer with the aim of improving the fire reaction behaviour. By performing a detailed physical, mechanical and thermal characterization, the suitability of the materials to be implemented in the building envelope as inner coating is demonstrated. Results show that also the thermal properties are improved in the three cases by the addition of PCM. Moreover, the negative effect of adding paraffin wax PCM into gypsum against flame can be easily reduced by the addition of a thin gypsum layer, which is a low tech and cheap solution without extra environmental impact., The work is partially funded by the Spanish government (ENE2015-64117-C5-1-R, ENE2015-64117-C5-2-R, MAT2011-26410 and BIA2014-52688-R). The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREA - UdL (2014 SGR 123) and research group DIOPMA - UB (2014 SGR 1543) and GICITED − UPC (2014 SGR 1298). In addition, this project has received funding from the European Commission Seventh Framework Programme (FP/2007-2013) under Grant agreement N° PIRSES-GA-2013-610692 (INNOSTORAGE) and from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 657466 (INPATH-TES).
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Bio-based insulation materials and their hygrothermal performance in a building envelope system (ETICS)

  • Palumbo, Mariana
  • Lacasta Palacio, Ana María
  • Giraldo Forero, María del Pilar
  • Haurie, Laia
  • Correal Mòdol, Eduard
Bio-based insulation materials (such as wood or hemp) are emerging as a promising alternative in building envelope applications, aiming at improving in-use energy efficiency. When compared to common insulation materials (rock and glass wool or petrol-based foams) bio-based materials present the advantage of being renewable, with a low embodied energy and CO2 neutral or negative. Moreover, these materials have a distinct hygrothermal performance, as the sorption/desorption of water vapour in their porous structure, in dynamic equilibrium with their surrounding environment, constantly modifies their hygric and thermal properties while causing energy transfers itself. In this paper, the hygrothermal performance of two different bio-based materials in outdoor conditions is evaluated. The first is an innovative light-weight composite made from corn pith and alginate. The second a commercially available wood insulator. The materials are tested alone and as components of external thermal insulation systems (ETICS) and compared to a conventional polystyrene foam. The results show how the sorption process influence the hygrothermal performance of the materials when the surrounding conditions are modified. When subjected to cyclic changes in temperature and relative humidity, the bio-based materials tested show a lower temperature variation than polystyrene. This is in part due to their lower thermal diffusivity, but also to the water absorption and desorption mechanisms occurring within the materials, which were measured by the change in mass of the materials during the tests. The differences in the thermal performance were more noticeable when the insulation materials were tested alone than when these were tested as a part of an ETIC System., This work was funded by MINECO (Spain) and AEI/FEDER/UE under the projects BIA2014-52688-R, BIA2017-88401-R and ENE2015-64117-C5-3-R. The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1758). M.P. would like to thank the Brazilian Education Ministry for the financial support received under the PNPD/Capes fellowship. This article has been possible with the support of the Ministerio de Economía y Competitividad (MINECO) and the Universitat Rovira i Virgili (URV) (FJCI-2016-28789).
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Study of the Thermal Properties and the Fire Performance of Flame Retardant-Organic PCM in Bulk Form

  • Palacios, Anabel
  • Gracia Cuesta, Alvaro de
  • Haurie, Laia
  • Cabeza, Luisa F.
  • Fernández Renna, Ana Inés
  • Barreneche Güerisoli, Camila
The implementation of organic phase change materials (PCMs) in several applications such as heating and cooling or building comfort is an important target in thermal energy storage (TES). However, one of the major drawbacks of organic PCMs implementation is flammability. The addition of flame retardants to PCMs or shape-stabilized PCMs is one of the approaches to address this problem and improve their final deployment in the building material sector. In this study, the most common organic PCM, Paraffin RT-21, and fatty acids mixtures of capric acid (CA), myristic acid (MA), and palmitic acid (PA) in bulk, were tested to improve their fire reaction. Several flame retardants, such as ammonium phosphate, melamine phosphate, hydromagnesite, magnesium hydroxide, and aluminum hydroxide, were tested. The properties of the improved PCM with flame retardants were characterized by thermogravimetric analyses (TGA), the dripping test, and differential scanning calorimetry (DSC). The results for the dripping test show that fire retardancy was considerably enhanced by the addition of hydromagnesite (50 wt %) and magnesium hydroxide (50 wt %) in fatty acids mixtures. This will help the final implementation of these enhanced PCMs in building sector. The influence of the addition of flame retardants on the melting enthalpy and temperatures of PCMs has been evaluated., The research leading to these results has received funding from the European Commission Seventh Framework Programme (FP/2007-2013) under grant agreement number PIRSES-GA-2013-610692 (INNOSTORAGE) and from the European Union’s Horizon 2020 research and innovation program under grant agreement No. 657466 (INPATH-TES). The authors would like to thank the Catalan Government for the quality accreditation given to their research groups GREA (2014 SGR 123), DIOPMA (2014 SGR 1543) and GICITED (2014 SGR 1298), and also the MINECO for the project BIA2014-52688-R, ENE2015-64117-C5-1-R, ENE2015-64117-C5-2-R, and ENE2015-64117-C5-3-R. Alvaro de Gracia and Camila Barreneche would like to thank Ministerio de Economia y Competitividad de España for Grant Juan de la Cierva, FJCI-2014-19940 and FJCI-2014-22886, respectively.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Bio-based insulation materials and their hygrothermal performance in a building envelope system (ETICS)

  • Palumbo, Mariana
  • Lacasta Palacio, Ana María
  • Giraldo Forero, María del Pilar
  • Haurie, Laia
  • Correal Mòdol, Eduard
Bio-based insulation materials (such as wood or hemp) are emerging as a promising alternative in building envelope applications, aiming at improving in-use energy efficiency. When compared to common insulation materials (rock and glass wool or petrol-based foams) bio-based materials present the advantage of being renewable, with a low embodied energy and CO2 neutral or negative. Moreover, these materials have a distinct hygrothermal performance, as the sorption/desorption of water vapour in their porous structure, in dynamic equilibrium with their surrounding environment, constantly modifies their hygric and thermal properties while causing energy transfers itself. In this paper, the hygrothermal performance of two different bio-based materials in outdoor conditions is evaluated. The first is an innovative light-weight composite made from corn pith and alginate. The second a commercially available wood insulator. The materials are tested alone and as components of external thermal insulation systems (ETICS) and compared to a conventional polystyrene foam. The results show how the sorption process influence the hygrothermal performance of the materials when the surrounding conditions are modified. When subjected to cyclic changes in temperature and relative humidity, the bio-based materials tested show a lower temperature variation than polystyrene. This is in part due to their lower thermal diffusivity, but also to the water absorption and desorption mechanisms occurring within the materials, which were measured by the change in mass of the materials during the tests. The differences in the thermal performance were more noticeable when the insulation materials were tested alone than when these were tested as a part of an ETIC System., This work was funded by MINECO (Spain) and AEI/FEDER/UE under the projects BIA2014-52688-R, BIA2017-88401-R and ENE2015-64117-C5-3-R. The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1758). M.P. would like to thank the Brazilian Education Ministry for the financial support received under the PNPD/Capes fellowship. This article has been possible with the support of the Ministerio de Economía y Competitividad (MINECO) and the Universitat Rovira i Virgili (URV) (FJCI-2016-28789).
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Study of the Thermal Properties and the Fire Performance of Flame Retardant-Organic PCM in Bulk Form

  • Palacios, Anabel
  • Gracia Cuesta, Alvaro de
  • Haurie, Laia
  • Cabeza, Luisa F.
  • Fernández Renna, Ana Inés
  • Barreneche Güerisoli, Camila
The implementation of organic phase change materials (PCMs) in several applications such as heating and cooling or building comfort is an important target in thermal energy storage (TES). However, one of the major drawbacks of organic PCMs implementation is flammability. The addition of flame retardants to PCMs or shape-stabilized PCMs is one of the approaches to address this problem and improve their final deployment in the building material sector. In this study, the most common organic PCM, Paraffin RT-21, and fatty acids mixtures of capric acid (CA), myristic acid (MA), and palmitic acid (PA) in bulk, were tested to improve their fire reaction. Several flame retardants, such as ammonium phosphate, melamine phosphate, hydromagnesite, magnesium hydroxide, and aluminum hydroxide, were tested. The properties of the improved PCM with flame retardants were characterized by thermogravimetric analyses (TGA), the dripping test, and differential scanning calorimetry (DSC). The results for the dripping test show that fire retardancy was considerably enhanced by the addition of hydromagnesite (50 wt %) and magnesium hydroxide (50 wt %) in fatty acids mixtures. This will help the final implementation of these enhanced PCMs in building sector. The influence of the addition of flame retardants on the melting enthalpy and temperatures of PCMs has been evaluated., The research leading to these results has received funding from the European Commission Seventh Framework Programme (FP/2007-2013) under grant agreement number PIRSES-GA-2013-610692 (INNOSTORAGE) and from the European Union’s Horizon 2020 research and innovation program under grant agreement No. 657466 (INPATH-TES). The authors would like to thank the Catalan Government for the quality accreditation given to their research groups GREA (2014 SGR 123), DIOPMA (2014 SGR 1543) and GICITED (2014 SGR 1298), and also the MINECO for the project BIA2014-52688-R, ENE2015-64117-C5-1-R, ENE2015-64117-C5-2-R, and ENE2015-64117-C5-3-R. Alvaro de Gracia and Camila Barreneche would like to thank Ministerio de Economia y Competitividad de España for Grant Juan de la Cierva, FJCI-2014-19940 and FJCI-2014-22886, respectively.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Use of multi-layered PCM gypsums to improve fire response. Physical, thermal and mechanical characterization

  • Serrano, Susana
  • Barreneche Güerisoli, Camila
  • Navarro Ezquerra, Antonia
  • Haurie, Laia
  • Fernández Renna, Ana Inés
  • Cabeza, Luisa F.
The building sector is one of the highest energy consumers representing around 30% of total energy use. One of the recommendations of the IEA (International Energy Agency) to reduce energy consumption in buildings is to enhance the thermal performance of building envelopes. In the present study, PCM (Phase Change Material) gypsum materials have been manufactured using three different PCM inclusion methods and a thin layer of gypsum without PCM is added as external layer with the aim of improving the fire reaction behaviour. By performing a detailed physical, mechanical and thermal characterization, the suitability of the materials to be implemented in the building envelope as inner coating is demonstrated. Results show that also the thermal properties are improved in the three cases by the addition of PCM. Moreover, the negative effect of adding paraffin wax PCM into gypsum against flame can be easily reduced by the addition of a thin gypsum layer, which is a low tech and cheap solution without extra environmental impact., The work is partially funded by the Spanish government (ENE2015-64117-C5-1-R, ENE2015-64117-C5-2-R, MAT2011-26410 and BIA2014-52688-R). The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREA - UdL (2014 SGR 123) and research group DIOPMA - UB (2014 SGR 1543) and GICITED − UPC (2014 SGR 1298). In addition, this project has received funding from the European Commission Seventh Framework Programme (FP/2007-2013) under Grant agreement N° PIRSES-GA-2013-610692 (INNOSTORAGE) and from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 657466 (INPATH-TES).