Skip to main content

IDENTIFICACION DE BARRERAS Y OPORTUNIDADES SOSTENIBLES EN LOS MATERIALES Y APLICACIONES DEL ALMACENAMIENTO DE ENERGIA TERMICA

ENE2015-64117-C5-2-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2015
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Dirección General de Investigación Científica y Técnica
Beneficiary centre UNIVERSIDAD DE BARCELONA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 41
Encontrada(s) 1 página(s)

Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Benchmarking of useful phase change materials for a building application

  • Navarro Farré, Lidia
  • Solé, Aran
  • Martín, Marc
  • Barreneche Güerisoli, Camila
  • Olivieri, Lorenzo
  • Tenorio, José Antonio
  • Cabeza, Luisa F.
Nowadays, there is an increasing interest in more efficient building materials and new technologies to accomplish the objectives defined by energy policies. The combination of energy efficient building designs and integration of renewable energies makes the use of thermal energy storage (TES) necessary. Within this context, the improvement of building envelopes by the use of phase change materials (PCM) has been widely studied. The PCM selection should fulfil the requirements of the specific application. In this study, a benchmarking of PCM available in the market was performed to undertake a material selection for a specific building application. The incorporation of PCM into a radiant wall technology present several requirements with especial interest on long-term thermal stability. A complete laboratory-scale characterization has been carried out considering the following properties: temperature of phase change, specific heat capacity, thermal conductivity, and stability., Financiado por el proyecto RTC-2015-3583-5 (INPHASE) del Ministerio de Economía y Competitividad, dentro del Programa Estatal de Investigación, Desarrollo e Innovación Orientada a los Retos de la Sociedad, en el marco del Plan Estatal de Investigación Científica y Técnica y de Innovación 2013-2016, y ha sido cofinanciado con FONDOS FEDER, con el objetivo de promover el desarrollo tecnológico, la innovación y una investigación de calidad. The work is partially funded by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER) and ENE2015-64117-C5-2-R (MINECO/FEDER)). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537 and 2017 SGR 188). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. Camila Barreneche would like to thank ACCIO for her Grant TecnioSpring Plus TECSPR17-1-0071. Aran Solé would like to thank Ministerio de Economia y Competitividad de España for Grant Juan de la Cierva FJCI-2015-25741.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Thermogravimetric study of a phase change slurry: effect of variable conditions

  • Giro-Paloma, Jessica
  • Valle-Zermeño, Ricardo del
  • Fernández Renna, Ana Inés
  • Chimenos Ribera, Josep Ma.
  • Formosa, Joan
Microcapsules containing Phase Change Materials (MPCM) are widely used for passive systems in energy storage. When MPCM are mixed with a carrier fluid, Phase Change Slurries (PCS) are used for heat transfer fluids in active systems or heat transport systems. The thermal behavior of PCS can be measured as dry or wet basis, resulting in important differences in weight losses. This study explores the optimum conditions for analyzing the thermal behavior of dried PCS by thermogravimetric analysis (TGA) varying the parameter conditions for obtaining peak temperature and heat flow (latent heat). The factors that were taken into account were the atmosphere of study (air and nitrogen) and the heating rate (0.5, 1, 5, and 10 °C·min−1). The best conditions to determine peak temperature are at 1 °C·min−1 and in N2 atmosphere, whereas the decomposition fusion/latent heat of the sample is improved at higher heating velocities towards 10 °C·min−1., The work is partially funded by the Spanish government (ENE2015-64117-C5-2R). The research leading to these results has received funding from the European Union’s Seventh Framework Programme (FP7/2007-2013) under grant agreement No. PIRSES-GA-2013-610692 (INNOSTORAGE) and from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 657466 (INPATH-TES). Ricardo del Valle Zermeño is grateful to the Government of Catalonia for the research grant (FI-DGR 2014). The authors would like to thank the Catalan Government for the quality accreditation given to their research group DIOPMA (2014 SGR 1543).
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Embodied energy and cost of high temperature thermal energy storage systems for use with concentrated solar power plants

  • Jacob, Rhys
  • Belusko, Martin
  • Fernández Renna, Ana Inés
  • Cabeza, Luisa F.
  • Saman, Wasim
  • Bruno, Frank
The intermittency of renewable energy systems remains one of the major hurdles preventing a large scale uptake of these technologies and concentrated solar power (CSP) systems are no different. However, CSP has the benefit of being able to store excess heat using thermal energy storage (TES). For the uptake of CSP with TES it must be demonstrated that the technology is both economically as well as environmentally feasible. This paper aims to investigate the economic and environmental impact of several TES options that are available for CSP systems. The investigated systems include an encapsulated phase change material (PCM) system, a coil-in-tank PCM system and a liquid sodium TES system. The economic impact in the current study refers to the capital cost (CAPEX) of each system including the tank, storage material, encapsulation cost (if applicable) and allowances for construction and engineering. The environmental impact of each system is accounted by calculating the embodied energy of each of the system components. Each storage system will be required to store a comparable amount of energy so that reliable conclusions can be drawn. The results from this analysis conclude that the encapsulated PCM (EPCM) and coil-in-tank system represent an embodied energy of roughly one third of the corresponding state-of-the-art two-tank molten salt system. Furthermore, the EPCM and coil-in-tank systems result in CAPEX reductions of 50% and 25% over the current state-of-the-art two-tank molten salt system. The liquid sodium system was found to result in higher embodied energy and CAPEX than any previously studied TES system. Finally, the advantages and disadvantages of each system was discussed and compared to previous literature., This research was performed as part of the Australian Solar Thermal Research Initiative (ASTRI), a project supported by the Australian Government, through the Australian Renewable Energy Agency (ARENA). The work is partially funded by the Spanish Government (ENE2015-64117-C5-1-R and ENE2015-64117-C5-2-R). The authors would like to thank the Catalan Government for the quality accreditation given to the research group GREA (2014 SGR 123) and DIOPMA (2014 SGR 1543). The research leading to these results has received funding from the European Union’s Seventh Framework Programme (FP7/2007-2013) under grant agreement n° PIRSES-GA-2013-610692 (INNOSTORAGE).
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Review of Reactors with Potential Use in Thermochemical Energy Storage in Concentrated Solar Power Plants

  • Zsembinszki, Gabriel
  • Solé, Aran
  • Barreneche Güerisoli, Camila
  • Prieto, Cristina
  • Fernández Renna, Ana Inés
  • Cabeza, Luisa F.
The aim of this study is to perform a review of the state-of-the-art of the reactors available in the literature, which are used for solid-gas reactions or thermal decomposition processes around 1000 ºC that could be further implemented for thermochemical energy storage in CSP (concentrated solar power) plants, specifically for SPT (solar power tower) technology. Both direct and indirect systems can be implemented, with direct and closed systems being the most studied ones. Among direct and closed systems, the most used configuration is the stacked bed reactor, with the fixed bed reactor being the most frequent option. Out of all of the reactors studied, almost 70% are used for solid-gas chemical reactions. Few data are available regarding solar efficiency in most of the processes, and the available information indicates relatively low values. Chemical reaction efficiencies show better values, especially in the case of a fluidized bed reactor for solid-gas chemical reactions, and fixed bed and rotary reactors for thermal decompositions., The work is partially funded by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER) and ENE2015-64117-C5-2-R (MINECO/FEDER)). The authors would like to thank the Catalan Government for the quality accreditation given to their research groups GREA (2017 SGR 1537) and DIOPMA (2017 SGR 118). GREA and DIOPMA are certified agents TECNIO in the category of technology developers from the Government of Catalonia. Dr. Aran Solé would like to thank Ministerio de Economía y Competitividad de España for Grant Juan de la Cierva, FJCI-2015-25741.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Use of multi-layered PCM gypsums to improve fire response. Physical, thermal and mechanical characterization

  • Serrano, Susana
  • Barreneche Güerisoli, Camila
  • Navarro Ezquerra, Antonia
  • Haurie, Laia
  • Fernández Renna, Ana Inés
  • Cabeza, Luisa F.
The building sector is one of the highest energy consumers representing around 30% of total energy use. One of the recommendations of the IEA (International Energy Agency) to reduce energy consumption in buildings is to enhance the thermal performance of building envelopes. In the present study, PCM (Phase Change Material) gypsum materials have been manufactured using three different PCM inclusion methods and a thin layer of gypsum without PCM is added as external layer with the aim of improving the fire reaction behaviour. By performing a detailed physical, mechanical and thermal characterization, the suitability of the materials to be implemented in the building envelope as inner coating is demonstrated. Results show that also the thermal properties are improved in the three cases by the addition of PCM. Moreover, the negative effect of adding paraffin wax PCM into gypsum against flame can be easily reduced by the addition of a thin gypsum layer, which is a low tech and cheap solution without extra environmental impact., The work is partially funded by the Spanish government (ENE2015-64117-C5-1-R, ENE2015-64117-C5-2-R, MAT2011-26410 and BIA2014-52688-R). The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREA - UdL (2014 SGR 123) and research group DIOPMA - UB (2014 SGR 1543) and GICITED − UPC (2014 SGR 1298). In addition, this project has received funding from the European Commission Seventh Framework Programme (FP/2007-2013) under Grant agreement N° PIRSES-GA-2013-610692 (INNOSTORAGE) and from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 657466 (INPATH-TES).
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

High density polyethylene spheres with PCM for domestic hot water applications: Water tank and laboratory scale study

  • Navarro Farré, Lidia
  • Barreneche Güerisoli, Camila
  • Castell, Albert
  • Redpath, David A.G.
  • Griffiths, Philip
  • Cabeza, Luisa F.
Renewable energy is a potential alternative energy provider with fewer CO2 emissions. However, the mismatch between energy supply and demand is the main disadvantage. Therefore, thermal energy storage becomes an essential technology for enhancing renewable energy efficiency and providing energy supply to the end user. In solar thermal energy systems, hot water tanks are widely used as sensible heat storage technology. Moreover, water storage usually requires large volumes and their improvement has been studied in terms of shape and arrangement. Latent heat storage materials are a potential technology for implementation in water storage tanks in order to reduce their volume and to enhance their efficiency. In this paper, the incorporation of shape high density polyethylene spheres with PCM into domestic hot water tanks is studied. Undesired results obtained in the water tank set-up lead the authors to analyse the PCM leakage in the laboratory. Laboratory analysis pointed out that the PCM-spheres must be thermally cycled and cleaned before their implementation in real application of domestic hot water in order to stabilize the PCM content inside the PCM- spheres., The work partially funded by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER), ENE2015-64117-C5-2-R (MINECO/FEDER), and ULLE10-4E-1305). The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREA (2014 SGR 123) and DIOPMA (2014 SGR 1543). The research leading to these results has received funding from the European Union's Seventh Framework Programme (FP7/2007-2013) under grant agreement n° PIRSES-GA-2013-610692 (INNOSTORAGE) and from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 657466 (INPATH-TES). Dr. Camila Barreneche would like to thank Ministerio de Economia y Competitividad de España for Grant Juan de la Cierva, FJCI-2014-22886.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Thermomechanical testing under operating conditions of A516Gr70 used for CSP storage tanks

  • Prieto, Cristina
  • Barreneche Güerisoli, Camila
  • Martínez, Mònica
  • Cabeza, Luisa F.
  • Fernández Renna, Ana Inés
Thermal energy storage (TES) in molten salts is the storage dominating technology in solar power applications today. In two-tank molten salt storage systems energy density ranges from 30 to 70 kW h/m3 are achievable. The salt material used is a binary system, composed of 60% NaNO3 and 40% KNO3. In the 8 MWhth pilot plant built and tested by Abengoa, the storage tanks were made of steel A516Gr.70 using the Appendix M of code API 650 for their design. A specific testing device was developed to evaluate thermo-mechanical properties, and a study was conducted in order to evaluate tensile properties of A516Gr.70 specimens under operation conditions for the hot tank at the pilot plant that is in contact with molten salts at 380 °C. Results confirmed the outcomes of the work: the reduction of the yield limit, elongation before fracture, and Young modulus at 380 °C after having been 5 min immersed in molten salts. Moreover, after a creep-test simulating operating 7 days conditions during, an additional reduction of the yield limit was measured., The research leading to these results has received funding from Spanish government (Fondo tecnológico IDI-20090393, ConSOLida CENIT 2008-1005). The work is partially funded by the Spanish government (ENE2011-28269-C03-02, ENE2011-22722, ENE2015-64117-C5-1-R, and ENE2015-64117-C5-2-R). The research leading to these results has received funding from the European Union's Seventh Framework Programme (FP7/2007-2013) under grant agreement n° PIRSES-GA-2013-610692 (INNOSTORAGE) and from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 657466 (INPATH-TES). The authors would like to thank the Catalan Government for the quality accreditation given to their research groups GREA (2014 SGR 123) and research group DIOPMA (2014 SGR 1543). Dr. Camila Barreneche would like to thank Ministerio de Economía y Competitividad de España for Grant Juan de la Cierva FJCI-2014-22886.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

TES-PS10 postmortem tests: Carbon steel corrosion performance exposed to molten salts under relevant operation conditions and lessons learnt for commercial scale-up

  • Ruiz-Cabañas, F. Javier
  • Prieto, Cristina
  • Madina, Virginia
  • Fernández Renna, Ana Inés
  • Cabeza, Luisa F.
Postmortem tests were performed over components removed from the TES-PS10 pilot plant after almost four years of continuous operation being exposed to solar salts under representative commercial operation conditions. Accordingly, corrosion performance of plates sections extracted from both storage tanks and samples cut from the hot molten salts pump were evaluated. Corrosion damage extension, oxides layers morphology, and corrosion products chemistry were analyzed by X-ray diffraction, energy dispersive X-ray spectrometry, optical microscopy, and SEM. In addition to materials compatibility with molten salts, mechanical tests were carried out over the storage tanks plates sections. Although the corrosion damage extension over the plates extracted from storage tanks was low and the mechanical properties were according to the standard, some interesting observations were seen. For example, a sample extracted from the hot storage tank and exposed to intermittent contact with molten salts showed some areas characterized by the growth of a non-protective oxide scale. Moreover, localized corrosion with slight penetration through the base material was identified for all storage plates samples under evaluation. On the other hand, the molten salt pump parts under study showed adherent and uniform oxides layers without detecting corrosion–erosion phenomena. Some cavities were found in the discharge elbow, and these imperfections were associated to a bad metallurgical quality during casting. Summarizing, corrosion phenomena suffered by the components under evaluation could be corrected in future plants by applying the lessons learned discussed in this study. As conclusion, materials selection analyzed within this postmortem evaluation is valid from the corrosion point of view to be used in the design of commercial TES systems in PTC plants., The research leading to these results has received funding from Spanish government (Fondo tecnológico IDI-20090393, ConSOLida CENIT 2008-1005). The work is partially funded by the Spanish Government (ENE2011-28269-C03-02, ENE2011-22722, ENE2015-64117-C5-1-R, and ENE2015-64117-C5-2-R). The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREiA (2017 SGR 1537) and research group DIOPMA (2017 SGR 138). GREiA and DIOPMA are certified agents TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Fatty acid eutectic mixtures and derivatives from non-edible animal fat as phase change materials

  • Gallart-Sirvent, Pau
  • Martín, Marc
  • Villorbina Noguera, Gemma
  • Balcells Fluvià, Mercè
  • Solé, Aran
  • Barreneche Güerisoli, Camila
  • Cabeza, Luisa F.
  • Canela i Garayoa, Ramon
A set of compounds from non-edible fat waste was prepared and their thermal behavior was studied. The fat was hydrolyzed and crystallized in a simple and robust process to yield palmitic acid-stearic acid (PA-SA) mixtures. The PA-SA mass ratios determined by GC-FID (gas chromatography-flame ionization detection) were similar to those reported for eutectic mixtures of PCMs (phase change materials). DSC (differential scanning calorimetry) results indicated that the melting and solidification temperatures were around 55 °C and 52 °C and the latent heat of the crystallized fractions measured was around 180 kJ kg−1. The thermal cycling reliability of the eutectic mixtures was also tested during 1000 melting/freezing cycles. The loss in melting and solidification enthalpies was below 14% in all mixtures showing a promising behavior for PCM applications. Additionally, the unsaturated fatty acids were recovered and transformed to threo-9,10-dihydroxystearic acid (DHSA) and some of their inorganic salts, which were analyzed by FT-IR (Fourier transform-infrared spectroscopy) and tested for the first time using the DSC technique., GREA and DBA are certified agents TECNIO in the category of technology developers from the Government of Catalonia. We thanks to Subproductos Cárnicos Echevarria y Asociados S.L (Cervera, Spain) for supplying the non-edible fat. Moreover, the research leading to these results has received funding from the European Commission Seventh Framework Programme (FP/2007–2013) under grant agreement no. PIRSES-GA-2013-610692 (INNOSTORAGE) and from the European Union's Horizon 2020 research and innovation program under grant agreement no. 657466 (INPATH-TES). The authors would like to thank the Catalan Government for the quality accreditation given to their research groups GREA (2014 SGR 123), Agricultural Biotechnology Research Group (2014 SGR 1296) and DIOPMA (2014 SGR 1543). This work has been partially funded by the Spanish government (CTQ2015-70982-C3-1-R (MINECO/FEDER), ENE2015-64117-C5-1-R (MINECO/FEDER) and ENE2015-64117-C5-2-R (MINECO/FEDER)). Dr Camila Barreneche would like to thank Ministerio de Economia y Competitividad de España for her grant Juan de la Cierva FJCI-2014-22886. Aran Solé would like to thank Ministerio de Economía y Competitividad de España for Grant Juan de la Cierva, FJCI-2015-25741.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Steam-PCM heat exchanger design and materials optimization by using Cr-Mo alloys

  • Ruiz-Cabañas, F. Javier
  • Prieto, Cristina
  • Jové, Aleix
  • Madina, Virginia
  • Fernández Renna, Ana Inés
  • Cabeza, Luisa F.
A387 Gr 91 Cr-Mo alloy corrosion compatibility with LiOH-KOH mixture was evaluated at 315 °C (Test#1) and 360 °C (Test#2). This alloy is studied for a techno-economical optimization of a steam-PCM heat exchanger proposed in the thermal energy storage (TES) system of a direct steam generation (DSG) facility. The corrosion damage was analyzed with visual inspection, optical microscopy, SEM, EDS and XRD, and corrosion rates were also calculated. A387 Gr 91 alloy generates protective oxide layers over base metal. Localized corrosion damages were not detected with these test conditions, while XRD and EDS profiles showed CrO and LiFeO2 as main corrosion products generated by this alloy. On the other hand, corrosion rates decrease with exposure time showing the passivation of the alloy. A387 Gr 91 corrosion performance was compared with A316L stainless steel, which was preliminary proposed by the authors in previous studies. In addition to corrosion performance, parameters such as cost, thermal properties, and mechanical properties are discussed. In conclusion, the use of A387 Gr 91 instead to A316L alloy for the construction of the steam-PCM heat exchanger involves the technoeconomical optimization of the equipment., The research leading to these results has received funding from CDTI in the project Innterconecta Thesto (ITC-20111050). The work is partially funded by the Spanish government (ENE2015-64117-C5-1-R, and ENE2015-64117-C5-2-R). The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREA (2014 SGR 123) and research group DIOPMA (2014 SGR 1543). The research leading to these results has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No 657466 (INPATH-TES).
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Influence of nanoparticle morphology and its dispersion ability regarding thermal properties of water used as phase change materials

  • Barreneche Güerisoli, Camila
  • Mondragon, Rosa
  • Ventura Espinosa, David D
  • Mata, José
  • Cabeza, Luisa F.
  • Fernández Renna, Ana Inés
  • Julia, J. Enrique
Nanoparticles with different morphologies were added to water to study if the morphology of the nanoparticles affects the main parameters of water used as phase change material (PCM). Considered morphologies were spherical, tubes and sheets in the form of spherical carbon black nanoparticles (CB), multiwalled carbon nanotubes (MWCNT), and graphene oxide nanosheets (GO). Results demonstrate that effectively the morphology of nanoparticles affect the thermophysical properties of the nano-enhanced PCM (NePCM). Depending on the morphology of the added nanoparticle, the final NePCM will have different subcooling and thermal conductivity, whereas its phase change enthalpy is not affected and, therefore, is the same for all produced NePCM., The research leading to these results has received funding from the European Commission Seventh Framework Programme (FP/2007-2013) under grant agreement n° PIRSES-GA-2013-610692 (INNOSTORAGE) and from the European Union’s Horizon 2020 research and innovation program under grant agreement No 657466 (INPATH-TES). The authors would like to thank the Catalan Government for the quality accreditation given to their research groups GREA (2014 SGR 123), DIOPMA (2014 SGR 1543). This work has been partially funded by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER) and ENE2015-64117-C5-2-R (MINECO/FEDER)). Dr. Camila Barreneche would like to thank Ministerio de Economia y Competitividad de España for Grant Juan de la Cierva FJCI-2014-22886. This work has been developed by participants of the COST Action CA15119 Overcoming Barriers to Nanofluids Market Uptake (NANOUPTAKE).
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Reduction of the subcooling of bischofite with the use of nucleatings agents

  • Ushak, Svetlana
  • Gutiérrez, Andrea
  • Barreneche Güerisoli, Camila
  • Fernández Renna, Ana Inés
  • Grágeda, Mario
  • Cabeza, Luisa F.
The use of by-products or wastes as phase change materials (PCM) in thermal energy storage (TES) systems is a good option to decrease the cost of such systems. One of the main disadvantages of PCM if inorganic materials are used is subcooling, as was found with bischofite, a by-product from the Chilean non-metallic industry, which subcooling is about 36 °C. Subcooling can be reduced by the addition of nucleating agents, but the selection of the best nucleating agent should be done taking into consideration the physical and chemical parameters of the salt hydrate. In this paper the parameters considered were the solubility of the materials in water, the chemical structure and the crystalline structure (crystal system, lattice parameters, density, cell volume, Z, and space group). It could be concluded that solubility, chemical structure and the crystal system have no influence in the nucleation capacity of a salt hydrate. The parameter that needs to be considered when selecting a nucleating agent for a salt hydrate is the lattice parameters of the crystal structure (cell longitude or angle)., The work at the University of Antofagasta was supported by CONICYT/FONDAP No. 15110019, and the Education Ministry of Chile Grant PMI ANT 1201. Andrea Gutierrez would like to acknowledge to the CONICYT/PAI No 7813110010 and Education Ministry of Chile her postdoctorate scholarships ANT 1106. The work is partially funded by the Spanish Government (ENE2015-64117-C5-1-R and ENE2015-64117-C5-2-R). The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREA (2014 SGR 123) and research group DIOPMA (2014 SGR 1543). This project has received funding from the European Commission Seventh Framework Programme (FP/2007–2013) under Grant agreement No. PIRSES-GA-2013-610692 (INNOSTORAGE) and from the European Union's Horizon 2020 research and innovation programme under grant agreement No 657466 (INPATH-TES). Dr. Camila Barreneche would like to thank Ministerio de Economia y Competitividad de España for the grant Juan de la Cierva, FJCI-2014-22886.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Materials selection for thermal energy storage systems in parabolic trough collector solar facilities using high chloride content nitrate salts

  • Ruiz-Cabañas, F. Javier
  • Prieto, Cristina
  • Madina, Virginia
  • Fernández Renna, Ana Inés
  • Cabeza, Luisa F.
The increasing role of concentrated solar power (CSP) within the renewable energy portfolio is attributed to the possibility of integrating thermal energy storage (TES) systems. Then, CSP technology has become one of the most interesting clean options to deliver dispatchable power on demand. Nowadays, commercial facilities use high quality solar salts (60%:40% NaNO3 and KNO3 by weight) as storage medium due to the attractive properties of this fluid to be applied under CSP operation conditions. Taking into account that CSP installations are designed with really large TES systems containing tens of thousands of tons, the use of lower quality nitrates salts would reduce the molten salts inventory cost and finally the investment cost of the CSP storage systems at commercial scale. The most important drawback of selecting low quality nitrates salts for high temperature CSP applications is the corrosion impact produced by impurities. Accordingly, chlorides have been identified in the state of the art as the impurity with higher effect over corrosion. This work is focused on A516 Gr70 carbon steel corrosion performance evaluation under high-chlorides content nitrates salts (1.2% and 3% by weight) at 400 °C. In addition, the feasibility of using the proposed low purity mixtures with current CSP facilities materials selection is analyzed. Results reported within this study show the critical effect of chloride content over corrosion mechanism producing lack of adherence between base metal and oxides layers in addition to corrosion products delamination and internal cracking. Then, the use of A516 Gr70 carbon steel is rejected for a long term design under solar salts containing chlorides content in the range 1.2–3% by weight being necessary a higher corrosion resistant materials selection. An improved materials selection focused on higher corrosion resistance alloys is discussed., The research leading to these results has received funding from Spanish government (Fondo tecnológico IDI-20090393, ConSOLida CENIT 2008-1005). The work is partially funded by the Spanish government (ENE2011-28269-C03-02, ENE2011-22722, ENE2015-64117-C5-1-R (MINECO/FEDER), and ENE2015-64117-C5-2-R (MINECO/FEDER)). The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREA (2014 SGR 123) and research group DIOPMA (2014 SGR 1543).
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Comparison of Microencapsulated Phase Change Materials Prepared at Laboratory Containing the Same Core and Different Shell Material

  • Giro-Paloma, Jessica
  • Alkan, Cemil
  • Chimenos Ribera, Josep Ma.
  • Fernández Renna, Ana Inés
Microencapsulated Phase Change Materials (MPCM) are widely used in active and passive systems for thermal energy storage. To evaluate the strength of a proper shell/PCM system, comparisons were performed between laboratory-prepared MPCM samples produced by in situ polymerization with a phase change temperature of 50 C and a particle size of around 1–2 m with tetracosane as PCM, and polystyrene (PS) and poly (methyl methacrylate) (PMMA) as shells. Evaluation of mechanical performance was performed for different samples by means of Atomic Force Microscopy (AFM) at different temperatures (23 C and 60 C) and with different encapsulation ratios (1:3 and 1:1, shell:core) in order to compare their properties with the PCM below and above its phase change. Evaluations of the Effective Young’s modulus (E) and deformation properties were performed for both types of MPCM. For an encapsulation mass ratio of 1:3, PS has better mechanical properties because, when increasing the temperature, the E decreases less than with PMMA. In the comparison between PS/tetracosane systems with different encapsulation mass ratios (1:3 and 1:1), E values were higher for the 1:3 encapsulation mass ratio at both temperatures under study. This means that, in terms of mechanical and thermal properties, the best combination core/shell/encapsulation mass ratio is PS/tetracosane/1:3., The work was partially funded by the Spanish government (ENE2015-64117-C5-2R). The research leading to these results received funding from the European Union’s Seventh Framework Program (FP7/2007–2013) under grant agreement No. PIRSES-GA-2013-610692 (INNOSTORAGE) and from the European Union’s Horizon 2020 research and innovation program under grant agreement No. 657466 (INPATH-TES). The authors would like to thank the Catalan Government for the quality accreditation given to their research group DIOPMA (2014 SGR 1543).
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

PCM/wood composite to store thermal energy in passive building envelopes

  • Barreneche Güerisoli, Camila
  • Vecstaudža, Jana
  • Bajare, Diana
  • Fernández Renna, Ana Inés
The development of new materials to store thermal energy in a passive building system is a must to improve the thermal efficiency by thermal-regulating the indoor temperatures. This fact will deal with the reduction of the gap between energy supply and energy demand to achieve thermal comfort in building indoors. The aim of this work was to test properties of novel PCM/wood composite materials developed at Riga Technical University. Impregnation of PCM (phase change material) in wood increases its thermal mass and regulates temperature fluctuations during day and night. The PCM used are paraffin waxes (RT-21 and RT-27 from Rubitherm) and the wood used was black alder, the most common wood in Latvia. The PCM distribution inside wood sample has been studied as well as its thermophysical, mechanical and fire reaction properties. Developed composite materials are promising in the field of energy saving in buildings., The research leading to these results has received funding from the European Commission Seventh Framework Programme (FP/2007-2013) under grant agreement n° PIRSES-GA-2013-610692 (INNOSTORAGE) and from the European Union’s Horizon 2020 research and innovation program under grant agreement No 657466 (INPATH-TES). The authors would like to thank the Catalan Government for the quality accreditation given to their research group DIOPMA (2014 SGR 1543). This work has been partially funded by the Spanish government (ENE2015-64117-C5-2-R (MINECO/FEDER)). Dr. Camila Barreneche would like to thank Ministerio de Economia y Competitividad de España for Grant Juan de la Cierva FJCI-2014-22886.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Considerations for the use of metal alloys as phase change materials for high temperature applications

  • Fernández Renna, Ana Inés
  • Barreneche Güerisoli, Camila
  • Belusko, Martin
  • Segarra Rubí, Mercè
  • Bruno, Frank
  • Cabeza, Luisa F.
The use of paraffin, salts and salt hydrates as phase change materials (PCMs) have been researched extensively and used in a number of commercial applications. However, metals and metal alloys, which possess a high storage density on a volume basis as well as a substantially higher thermal conductivity, has received much less attention. This paper discusses the considerations for the use of metal and metal alloys as phase change materials for high temperature thermal storage applications, as well as summarises the literature on the limited research in this area. Although some pure metals and metal alloys present interesting thermal properties to be used as PCMs in thermal storage systems, there is a lack of understanding on the implications of the metallurgical aspects related to the melting and solidification of these materials under thermal cycling at high temperatures. The main issues to be considered include vapour pressure, undercooling, corrosion, segregation, changes in composition and microstructure, changes in thermal properties and undesired reactions. Further research is needed before these materials can be used as PCMs in thermal energy storage systems in industry., The research leading to these results has received funding from the European Commission Seventh Framework Programme (FP/2007-2013) under grant agreement n° PIRSES-GA-2013-610692 (INNOSTORAGE) and from the European Union's Horizon 2020 Research and Innovation Program under grant agreement No 657466 (INPATH-TES). The authors would like to thank the Catalan Government for the quality accreditation given to their research groups GREA (2014 SGR 123) and DIOPMA (2014 SGR 1543), and also the Spanish Government for the projects ENE2015-64117-C5-1-R and ENE2015-64117-C5-2-R (MINECO/FEDER, UE). Dr. Camila Barreneche would like to thank Ministerio de Economia y Competitividad de España for Grant Juan de la Cierva, FJCI-2014-22886. This paper was produced with support from the “Premier’s Research Industry Fund - International Research Grant Program” (IRGP 33) funded by the Government of South Australia.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Study of the Thermal Properties and the Fire Performance of Flame Retardant-Organic PCM in Bulk Form

  • Palacios, Anabel
  • Gracia Cuesta, Alvaro de
  • Haurie, Laia
  • Cabeza, Luisa F.
  • Fernández Renna, Ana Inés
  • Barreneche Güerisoli, Camila
The implementation of organic phase change materials (PCMs) in several applications such as heating and cooling or building comfort is an important target in thermal energy storage (TES). However, one of the major drawbacks of organic PCMs implementation is flammability. The addition of flame retardants to PCMs or shape-stabilized PCMs is one of the approaches to address this problem and improve their final deployment in the building material sector. In this study, the most common organic PCM, Paraffin RT-21, and fatty acids mixtures of capric acid (CA), myristic acid (MA), and palmitic acid (PA) in bulk, were tested to improve their fire reaction. Several flame retardants, such as ammonium phosphate, melamine phosphate, hydromagnesite, magnesium hydroxide, and aluminum hydroxide, were tested. The properties of the improved PCM with flame retardants were characterized by thermogravimetric analyses (TGA), the dripping test, and differential scanning calorimetry (DSC). The results for the dripping test show that fire retardancy was considerably enhanced by the addition of hydromagnesite (50 wt %) and magnesium hydroxide (50 wt %) in fatty acids mixtures. This will help the final implementation of these enhanced PCMs in building sector. The influence of the addition of flame retardants on the melting enthalpy and temperatures of PCMs has been evaluated., The research leading to these results has received funding from the European Commission Seventh Framework Programme (FP/2007-2013) under grant agreement number PIRSES-GA-2013-610692 (INNOSTORAGE) and from the European Union’s Horizon 2020 research and innovation program under grant agreement No. 657466 (INPATH-TES). The authors would like to thank the Catalan Government for the quality accreditation given to their research groups GREA (2014 SGR 123), DIOPMA (2014 SGR 1543) and GICITED (2014 SGR 1298), and also the MINECO for the project BIA2014-52688-R, ENE2015-64117-C5-1-R, ENE2015-64117-C5-2-R, and ENE2015-64117-C5-3-R. Alvaro de Gracia and Camila Barreneche would like to thank Ministerio de Economia y Competitividad de España for Grant Juan de la Cierva, FJCI-2014-19940 and FJCI-2014-22886, respectively.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Empirical equation to estimate viscosity of paraffin

  • Ferrer, Gerard
  • Gschwander, Stefan
  • Solé, Aran
  • Barreneche Güerisoli, Camila
  • Fernández Renna, Ana Inés
  • Schossig, Peter
  • Cabeza, Luisa F.
Thermal energy storage (TES) systems using phase change materials (PCM) are nowadays widely developed to be applied in solar power plants or cooling and domestic comfort services. The design of a TES system does not only rely on the energy density that a PCM can provide, but also on other important material properties such as its rheological behavior when the PCM is melted. Viscosity varies with temperature, but the lack of an empirical equation predicting its value has lead researchers to simulate the system performance taking constant viscosity values which, consequently, have led to errors on the designs. As paraffin are one of the most common PCM types used, the present paper evaluates the rheology of four commercial paraffin with different phase change temperatures in order to find out an empirical equation for the whole paraffin family. A polynomial 3 model type equation has been found as the best one to predict paraffin viscosity., The work is partially funded by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER) and ENE2015-64117-C5-2-R (MINECO/FEDER)). The authors would like to thank the Catalan Government for the quality accreditation given to their research groups GREA (2014 SGR 123) and research group DIOPMA (2014 SGR 1543). The research leading to these results has received funding from RTC-2015-3583-5 (INPHASE) del Ministerio de Economía y Competitividad, dentro del Programa Estatal de Investigación, Desarrollo e Innovación Orientada a los Retos de la Sociedad, en el marco del Plan Estatal de Investigación Científica y Técnica y de Innovación 2013–2016, y ha sido cofinanciado con FONDOS FEDER, con el objetivo de promover el desarrollo tecnológico, la innovación y una investigación de calidad, and from the European Union’s Seventh Framework Programme (FP7/2007-2013) under grant agreement n° PIRSES-GA-2013-610692 (INNOSTORAGE) and from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 657466 (INPATH-TES). Dr. Camila Barreneche would like to thank Ministerio de Economia y Competitividad de España for Grant Juan de la Cierva, FJCI-2014-22886.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

New formulation and characterization of enhanced bulk-organic phase change materials

  • Palacios, Anabel
  • Gracia Cuesta, Alvaro de
  • Cabeza, Luisa F.
  • Julià Bolivar, José Enrique
  • Fernández Renna, Ana Inés
  • Barreneche Güerisoli, Camila
The main drawbacks faced by researchers to successfully implement organic-PCM as materials to improve the thermal performance of building systems are their low thermal conductivity, their high flammability, and their low thermal cycling stability. T In the present work, authors present a new enhanced PCM formulations aimed to solve the stated disadvantages in organic bulk-PCM. The new enhanced PCM were prepared by adding high thermal conductivity particles and two kinds of flame retardants into organic PCM (paraffin and fatty acid eutectic mixtures). In the first stage, the effective thermal conductivity of organic-PCM was increased by using two different methods: directly dispersion of powder graphite (PG) bulk-PCM and vacuum impregnation of PCM into expanded graphite (EG). In the second stage, the fire reaction behaviour of the thermal conductivity enhanced PCM formulations was improved by adding two kind of flame retardant: magnesium hydroxide and ammonium phosphate (APP).. Their fire reaction behaviour, thermal conductivity and thermophysical properties were measured by adapting the dripping test (UNE 23727-90), the hot-wire method and Differential Scanning Calorimetry (DSC), respectively. The enhanced PCM composites show a self-extinguished behaviour in terms of fire performance mechanism. The EG working with endothermic and phosphates flame retardants improve the fire performance of PCM by acting as a synergic system and the thermal conductivity is increased. However, their thermal storage capacity is significant decreased due to the large amount of flame retardant added (up to 40%). The thermal reliability was also tested, the enhanced PCM composites were stable up to 1000 thermal cycles., The research leading to these results has received funding from the European Commission Seventh Framework Programme (FP/2007-2013) under grant agreement n° PIRSES-GA-2013-610692 (INNOSTORAGE) and from the European Union's Horizon 2020 research and innovation program under grant agreement No 657466 (INPATH-TES). The authors would like to thank the Catalan Government for the quality accreditation given to their research groups GREA (2014 SGR 123), DIOPMA (2014 SGR 1543) and GICITED (2014 SGR 1298). The work partially funded by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER), ENE2015-64117-C5-2-R(MINECO/FEDER), and ENE2015-64117-C5-3-R(MINECO/FEDER)). Dr. Alvaro de Gracia and Dr. Camila Barreneche would like to thank Ministerio de Economia y Competitividad de España for Grant Juan de la Cierva, FJCI-2014-19940 and FJCI-2014-22886, respectively.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Benchmarking of useful phase change materials for a building application

  • Navarro, Lidia
  • Solé, Aran
  • Martín, Marc
  • Barreneche, Camila
  • Olivieri, Lorenzo
  • Tenorio Ríos, José Antonio
  • Cabeza, Luisa F.
Nowadays, there is an increasing interest in more efficient building materials and new technologies to accomplish the objectives defined by energy policies. The combination of energy efficient building designs and integration of renewable energies makes the use of thermal energy storage (TES) necessary. Within this context, the improvement of building envelopes by the use of phase change materials (PCM) has been widely studied. The PCM selection should fulfil the requirements of the specific application. In this study, a benchmarking of PCM available in the market was performed to undertake a material selection for a specific building application. The incorporation of PCM into a radiant wall technology present several requirements with especial interest on long-term thermal stability. A complete laboratory-scale characterization has been carried out considering the following properties: temperature of phase change, specific heat capacity, thermal conductivity, and stability., Financiado por el proyecto RTC-2015-3583-5 (INPHASE) del Ministerio de Economía y Competitividad, dentro del Programa Estatal de Investigación, Desarrollo e Innovación Orientada a los Retos de la Sociedad, en el marco del Plan Estatal de Investigación Científica y Técnica y de Innovación 2013–2016, y ha sido cofinanciado con FONDOS FEDER, con el objetivo de promover el desarrollo tecnológico, la innovación y una investigación de calidad. The work is partially funded by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER) and ENE2015-64117-C5-2-R (MINECO/FEDER)). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537 and 2017 SGR 188). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. Camila Barreneche would like to thank ACCIO for her Grant TecnioSpring Plus TECSPR17-1-0071. Aran Solé would like to thank Ministerio de Economia y Competitividad de España for Grant Juan de la Cierva FJCI-2015-25741., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Comparación de las características mecánicas y dieléctricas de varios polímeros mezclados con caucho de neumáticos fuera de uso (GTR) para su aplicación como aislante de calzado de trabajo industrial, Comparison of the mechanical and dielectric characteristics of various polymers mixed with ground tired rubber (GTR) for its application as industrial work footwear insulator

  • Mujal-Rosas, Ramon Maria|||0000-0001-6859-8318
  • Marín Genescà, Marc
  • Garcia Amoros, Jordi
  • Colom Fajula, Xavier|||0000-0003-3511-852X
  • Salueña Berna, Javier|||0000-0003-0120-7057
La masiva fabricación de neumáticos y su dificultad para su posterior reciclaje, representa hoy por hoy, un grave problema medio ambiental. Existen varios métodos para intentar reciclar los neumáticos usados, uno de ellos consiste en su separación mecánica, en el cual el caucho vulcanizado se separa del acero y de las fibras, lo que da como resultado un caucho que puede presentarse molido en pequeñas partículas (Ground Tire Rubber, o GTR). Este caucho puede utilizarse en diversas aplicaciones, como la que presenta esta investigación, en la cual una vez mezclado con polimeros de uso habitual, ha de servir para la fabricación de los aislamientos para calzado industrial de trabajo. Por tanto, el objetivo de este estudio, pasa por evaluar los resultados de mezclar estas partículas de GTR con varias matrices poliméricas de uso habitual (polimero+GTR), comprobando que tanto sus propiedades mecánicas como dieléctricas cumplen con las normas establecias para la fabricación de los aislamientos para zapatos de uso industrial. El análisis se llevará a cabo utilizando siete matrices poliméricas mezcladas con diferentes concentraciones de GTR., Esta investigación fue financiada por el MINISTERIO DE ECONOMIA Y COMPETITIVIDAD, Gobierno de España ENE2015-64117-C5-3-R (MINECO/FEDER)., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Comparison of Microencapsulated Phase Change Materials Prepared at Laboratory Containing the Same Core and Different Shell Material

  • Giro-Paloma, Jessica
  • Alkan, Cemil
  • Chimenos Ribera, Josep Ma.
  • Fernández Renna, Ana Inés
Microencapsulated Phase Change Materials (MPCM) are widely used in active and passive systems for thermal energy storage. To evaluate the strength of a proper shell/PCM system, comparisons were performed between laboratory-prepared MPCM samples produced by in situ polymerization with a phase change temperature of 50 C and a particle size of around 1–2 m with tetracosane as PCM, and polystyrene (PS) and poly (methyl methacrylate) (PMMA) as shells. Evaluation of mechanical performance was performed for different samples by means of Atomic Force Microscopy (AFM) at different temperatures (23 C and 60 C) and with different encapsulation ratios (1:3 and 1:1, shell:core) in order to compare their properties with the PCM below and above its phase change. Evaluations of the Effective Young’s modulus (E) and deformation properties were performed for both types of MPCM. For an encapsulation mass ratio of 1:3, PS has better mechanical properties because, when increasing the temperature, the E decreases less than with PMMA. In the comparison between PS/tetracosane systems with different encapsulation mass ratios (1:3 and 1:1), E values were higher for the 1:3 encapsulation mass ratio at both temperatures under study. This means that, in terms of mechanical and thermal properties, the best combination core/shell/encapsulation mass ratio is PS/tetracosane/1:3., The work was partially funded by the Spanish government (ENE2015-64117-C5-2R). The research leading to these results received funding from the European Union’s Seventh Framework Program (FP7/2007–2013) under grant agreement No. PIRSES-GA-2013-610692 (INNOSTORAGE) and from the European Union’s Horizon 2020 research and innovation program under grant agreement No. 657466 (INPATH-TES). The authors would like to thank the Catalan Government for the quality accreditation given to their research group DIOPMA (2014 SGR 1543).
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Study of the Thermal Properties and the Fire Performance of Flame Retardant-Organic PCM in Bulk Form

  • Palacios, Anabel
  • Gracia Cuesta, Alvaro de
  • Haurie, Laia
  • Cabeza, Luisa F.
  • Fernández Renna, Ana Inés
  • Barreneche Güerisoli, Camila
The implementation of organic phase change materials (PCMs) in several applications such as heating and cooling or building comfort is an important target in thermal energy storage (TES). However, one of the major drawbacks of organic PCMs implementation is flammability. The addition of flame retardants to PCMs or shape-stabilized PCMs is one of the approaches to address this problem and improve their final deployment in the building material sector. In this study, the most common organic PCM, Paraffin RT-21, and fatty acids mixtures of capric acid (CA), myristic acid (MA), and palmitic acid (PA) in bulk, were tested to improve their fire reaction. Several flame retardants, such as ammonium phosphate, melamine phosphate, hydromagnesite, magnesium hydroxide, and aluminum hydroxide, were tested. The properties of the improved PCM with flame retardants were characterized by thermogravimetric analyses (TGA), the dripping test, and differential scanning calorimetry (DSC). The results for the dripping test show that fire retardancy was considerably enhanced by the addition of hydromagnesite (50 wt %) and magnesium hydroxide (50 wt %) in fatty acids mixtures. This will help the final implementation of these enhanced PCMs in building sector. The influence of the addition of flame retardants on the melting enthalpy and temperatures of PCMs has been evaluated., The research leading to these results has received funding from the European Commission Seventh Framework Programme (FP/2007-2013) under grant agreement number PIRSES-GA-2013-610692 (INNOSTORAGE) and from the European Union’s Horizon 2020 research and innovation program under grant agreement No. 657466 (INPATH-TES). The authors would like to thank the Catalan Government for the quality accreditation given to their research groups GREA (2014 SGR 123), DIOPMA (2014 SGR 1543) and GICITED (2014 SGR 1298), and also the MINECO for the project BIA2014-52688-R, ENE2015-64117-C5-1-R, ENE2015-64117-C5-2-R, and ENE2015-64117-C5-3-R. Alvaro de Gracia and Camila Barreneche would like to thank Ministerio de Economia y Competitividad de España for Grant Juan de la Cierva, FJCI-2014-19940 and FJCI-2014-22886, respectively.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

High density polyethylene spheres with PCM for domestic hot water applications: Water tank and laboratory scale study

  • Navarro Farré, Lidia
  • Barreneche Güerisoli, Camila
  • Castell, Albert
  • Redpath, David A.G.
  • Griffiths, Philip
  • Cabeza, Luisa F.
Renewable energy is a potential alternative energy provider with fewer CO2 emissions. However, the mismatch between energy supply and demand is the main disadvantage. Therefore, thermal energy storage becomes an essential technology for enhancing renewable energy efficiency and providing energy supply to the end user. In solar thermal energy systems, hot water tanks are widely used as sensible heat storage technology. Moreover, water storage usually requires large volumes and their improvement has been studied in terms of shape and arrangement. Latent heat storage materials are a potential technology for implementation in water storage tanks in order to reduce their volume and to enhance their efficiency. In this paper, the incorporation of shape high density polyethylene spheres with PCM into domestic hot water tanks is studied. Undesired results obtained in the water tank set-up lead the authors to analyse the PCM leakage in the laboratory. Laboratory analysis pointed out that the PCM-spheres must be thermally cycled and cleaned before their implementation in real application of domestic hot water in order to stabilize the PCM content inside the PCM- spheres., The work partially funded by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER), ENE2015-64117-C5-2-R (MINECO/FEDER), and ULLE10-4E-1305). The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREA (2014 SGR 123) and DIOPMA (2014 SGR 1543). The research leading to these results has received funding from the European Union's Seventh Framework Programme (FP7/2007-2013) under grant agreement n° PIRSES-GA-2013-610692 (INNOSTORAGE) and from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 657466 (INPATH-TES). Dr. Camila Barreneche would like to thank Ministerio de Economia y Competitividad de España for Grant Juan de la Cierva, FJCI-2014-22886.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Review of Reactors with Potential Use in Thermochemical Energy Storage in Concentrated Solar Power Plants

  • Zsembinszki, Gabriel
  • Solé, Aran
  • Barreneche Güerisoli, Camila
  • Prieto, Cristina
  • Fernández Renna, Ana Inés
  • Cabeza, Luisa F.
The aim of this study is to perform a review of the state-of-the-art of the reactors available in the literature, which are used for solid-gas reactions or thermal decomposition processes around 1000 ºC that could be further implemented for thermochemical energy storage in CSP (concentrated solar power) plants, specifically for SPT (solar power tower) technology. Both direct and indirect systems can be implemented, with direct and closed systems being the most studied ones. Among direct and closed systems, the most used configuration is the stacked bed reactor, with the fixed bed reactor being the most frequent option. Out of all of the reactors studied, almost 70% are used for solid-gas chemical reactions. Few data are available regarding solar efficiency in most of the processes, and the available information indicates relatively low values. Chemical reaction efficiencies show better values, especially in the case of a fluidized bed reactor for solid-gas chemical reactions, and fixed bed and rotary reactors for thermal decompositions., The work is partially funded by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER) and ENE2015-64117-C5-2-R (MINECO/FEDER)). The authors would like to thank the Catalan Government for the quality accreditation given to their research groups GREA (2017 SGR 1537) and DIOPMA (2017 SGR 118). GREA and DIOPMA are certified agents TECNIO in the category of technology developers from the Government of Catalonia. Dr. Aran Solé would like to thank Ministerio de Economía y Competitividad de España for Grant Juan de la Cierva, FJCI-2015-25741.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Reduction of the subcooling of bischofite with the use of nucleatings agents

  • Ushak, Svetlana
  • Gutiérrez, Andrea
  • Barreneche Güerisoli, Camila
  • Fernández Renna, Ana Inés
  • Grágeda, Mario
  • Cabeza, Luisa F.
The use of by-products or wastes as phase change materials (PCM) in thermal energy storage (TES) systems is a good option to decrease the cost of such systems. One of the main disadvantages of PCM if inorganic materials are used is subcooling, as was found with bischofite, a by-product from the Chilean non-metallic industry, which subcooling is about 36 °C. Subcooling can be reduced by the addition of nucleating agents, but the selection of the best nucleating agent should be done taking into consideration the physical and chemical parameters of the salt hydrate. In this paper the parameters considered were the solubility of the materials in water, the chemical structure and the crystalline structure (crystal system, lattice parameters, density, cell volume, Z, and space group). It could be concluded that solubility, chemical structure and the crystal system have no influence in the nucleation capacity of a salt hydrate. The parameter that needs to be considered when selecting a nucleating agent for a salt hydrate is the lattice parameters of the crystal structure (cell longitude or angle)., The work at the University of Antofagasta was supported by CONICYT/FONDAP No. 15110019, and the Education Ministry of Chile Grant PMI ANT 1201. Andrea Gutierrez would like to acknowledge to the CONICYT/PAI No 7813110010 and Education Ministry of Chile her postdoctorate scholarships ANT 1106. The work is partially funded by the Spanish Government (ENE2015-64117-C5-1-R and ENE2015-64117-C5-2-R). The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREA (2014 SGR 123) and research group DIOPMA (2014 SGR 1543). This project has received funding from the European Commission Seventh Framework Programme (FP/2007–2013) under Grant agreement No. PIRSES-GA-2013-610692 (INNOSTORAGE) and from the European Union's Horizon 2020 research and innovation programme under grant agreement No 657466 (INPATH-TES). Dr. Camila Barreneche would like to thank Ministerio de Economia y Competitividad de España for the grant Juan de la Cierva, FJCI-2014-22886.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Thermomechanical testing under operating conditions of A516Gr70 used for CSP storage tanks

  • Prieto, Cristina
  • Barreneche Güerisoli, Camila
  • Martínez, Mònica
  • Cabeza, Luisa F.
  • Fernández Renna, Ana Inés
Thermal energy storage (TES) in molten salts is the storage dominating technology in solar power applications today. In two-tank molten salt storage systems energy density ranges from 30 to 70 kW h/m3 are achievable. The salt material used is a binary system, composed of 60% NaNO3 and 40% KNO3. In the 8 MWhth pilot plant built and tested by Abengoa, the storage tanks were made of steel A516Gr.70 using the Appendix M of code API 650 for their design. A specific testing device was developed to evaluate thermo-mechanical properties, and a study was conducted in order to evaluate tensile properties of A516Gr.70 specimens under operation conditions for the hot tank at the pilot plant that is in contact with molten salts at 380 °C. Results confirmed the outcomes of the work: the reduction of the yield limit, elongation before fracture, and Young modulus at 380 °C after having been 5 min immersed in molten salts. Moreover, after a creep-test simulating operating 7 days conditions during, an additional reduction of the yield limit was measured., The research leading to these results has received funding from Spanish government (Fondo tecnológico IDI-20090393, ConSOLida CENIT 2008-1005). The work is partially funded by the Spanish government (ENE2011-28269-C03-02, ENE2011-22722, ENE2015-64117-C5-1-R, and ENE2015-64117-C5-2-R). The research leading to these results has received funding from the European Union's Seventh Framework Programme (FP7/2007-2013) under grant agreement n° PIRSES-GA-2013-610692 (INNOSTORAGE) and from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 657466 (INPATH-TES). The authors would like to thank the Catalan Government for the quality accreditation given to their research groups GREA (2014 SGR 123) and research group DIOPMA (2014 SGR 1543). Dr. Camila Barreneche would like to thank Ministerio de Economía y Competitividad de España for Grant Juan de la Cierva FJCI-2014-22886.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Use of multi-layered PCM gypsums to improve fire response. Physical, thermal and mechanical characterization

  • Serrano, Susana
  • Barreneche Güerisoli, Camila
  • Navarro Ezquerra, Antonia
  • Haurie, Laia
  • Fernández Renna, Ana Inés
  • Cabeza, Luisa F.
The building sector is one of the highest energy consumers representing around 30% of total energy use. One of the recommendations of the IEA (International Energy Agency) to reduce energy consumption in buildings is to enhance the thermal performance of building envelopes. In the present study, PCM (Phase Change Material) gypsum materials have been manufactured using three different PCM inclusion methods and a thin layer of gypsum without PCM is added as external layer with the aim of improving the fire reaction behaviour. By performing a detailed physical, mechanical and thermal characterization, the suitability of the materials to be implemented in the building envelope as inner coating is demonstrated. Results show that also the thermal properties are improved in the three cases by the addition of PCM. Moreover, the negative effect of adding paraffin wax PCM into gypsum against flame can be easily reduced by the addition of a thin gypsum layer, which is a low tech and cheap solution without extra environmental impact., The work is partially funded by the Spanish government (ENE2015-64117-C5-1-R, ENE2015-64117-C5-2-R, MAT2011-26410 and BIA2014-52688-R). The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREA - UdL (2014 SGR 123) and research group DIOPMA - UB (2014 SGR 1543) and GICITED − UPC (2014 SGR 1298). In addition, this project has received funding from the European Commission Seventh Framework Programme (FP/2007-2013) under Grant agreement N° PIRSES-GA-2013-610692 (INNOSTORAGE) and from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 657466 (INPATH-TES).
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Empirical equation to estimate viscosity of paraffin

  • Ferrer, Gerard
  • Gschwander, Stefan
  • Solé, Aran
  • Barreneche Güerisoli, Camila
  • Fernández Renna, Ana Inés
  • Schossig, Peter
  • Cabeza, Luisa F.
Thermal energy storage (TES) systems using phase change materials (PCM) are nowadays widely developed to be applied in solar power plants or cooling and domestic comfort services. The design of a TES system does not only rely on the energy density that a PCM can provide, but also on other important material properties such as its rheological behavior when the PCM is melted. Viscosity varies with temperature, but the lack of an empirical equation predicting its value has lead researchers to simulate the system performance taking constant viscosity values which, consequently, have led to errors on the designs. As paraffin are one of the most common PCM types used, the present paper evaluates the rheology of four commercial paraffin with different phase change temperatures in order to find out an empirical equation for the whole paraffin family. A polynomial 3 model type equation has been found as the best one to predict paraffin viscosity., The work is partially funded by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER) and ENE2015-64117-C5-2-R (MINECO/FEDER)). The authors would like to thank the Catalan Government for the quality accreditation given to their research groups GREA (2014 SGR 123) and research group DIOPMA (2014 SGR 1543). The research leading to these results has received funding from RTC-2015-3583-5 (INPHASE) del Ministerio de Economía y Competitividad, dentro del Programa Estatal de Investigación, Desarrollo e Innovación Orientada a los Retos de la Sociedad, en el marco del Plan Estatal de Investigación Científica y Técnica y de Innovación 2013–2016, y ha sido cofinanciado con FONDOS FEDER, con el objetivo de promover el desarrollo tecnológico, la innovación y una investigación de calidad, and from the European Union’s Seventh Framework Programme (FP7/2007-2013) under grant agreement n° PIRSES-GA-2013-610692 (INNOSTORAGE) and from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 657466 (INPATH-TES). Dr. Camila Barreneche would like to thank Ministerio de Economia y Competitividad de España for Grant Juan de la Cierva, FJCI-2014-22886.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Fatty acid eutectic mixtures and derivatives from non-edible animal fat as phase change materials

  • Gallart-Sirvent, Pau
  • Martín, Marc
  • Villorbina Noguera, Gemma
  • Balcells Fluvià, Mercè
  • Solé, Aran
  • Barreneche Güerisoli, Camila
  • Cabeza, Luisa F.
  • Canela i Garayoa, Ramon
A set of compounds from non-edible fat waste was prepared and their thermal behavior was studied. The fat was hydrolyzed and crystallized in a simple and robust process to yield palmitic acid-stearic acid (PA-SA) mixtures. The PA-SA mass ratios determined by GC-FID (gas chromatography-flame ionization detection) were similar to those reported for eutectic mixtures of PCMs (phase change materials). DSC (differential scanning calorimetry) results indicated that the melting and solidification temperatures were around 55 °C and 52 °C and the latent heat of the crystallized fractions measured was around 180 kJ kg−1. The thermal cycling reliability of the eutectic mixtures was also tested during 1000 melting/freezing cycles. The loss in melting and solidification enthalpies was below 14% in all mixtures showing a promising behavior for PCM applications. Additionally, the unsaturated fatty acids were recovered and transformed to threo-9,10-dihydroxystearic acid (DHSA) and some of their inorganic salts, which were analyzed by FT-IR (Fourier transform-infrared spectroscopy) and tested for the first time using the DSC technique., GREA and DBA are certified agents TECNIO in the category of technology developers from the Government of Catalonia. We thanks to Subproductos Cárnicos Echevarria y Asociados S.L (Cervera, Spain) for supplying the non-edible fat. Moreover, the research leading to these results has received funding from the European Commission Seventh Framework Programme (FP/2007–2013) under grant agreement no. PIRSES-GA-2013-610692 (INNOSTORAGE) and from the European Union's Horizon 2020 research and innovation program under grant agreement no. 657466 (INPATH-TES). The authors would like to thank the Catalan Government for the quality accreditation given to their research groups GREA (2014 SGR 123), Agricultural Biotechnology Research Group (2014 SGR 1296) and DIOPMA (2014 SGR 1543). This work has been partially funded by the Spanish government (CTQ2015-70982-C3-1-R (MINECO/FEDER), ENE2015-64117-C5-1-R (MINECO/FEDER) and ENE2015-64117-C5-2-R (MINECO/FEDER)). Dr Camila Barreneche would like to thank Ministerio de Economia y Competitividad de España for her grant Juan de la Cierva FJCI-2014-22886. Aran Solé would like to thank Ministerio de Economía y Competitividad de España for Grant Juan de la Cierva, FJCI-2015-25741.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Influence of nanoparticle morphology and its dispersion ability regarding thermal properties of water used as phase change materials

  • Barreneche Güerisoli, Camila
  • Mondragon, Rosa
  • Ventura Espinosa, David D
  • Mata, José
  • Cabeza, Luisa F.
  • Fernández Renna, Ana Inés
  • Julia, J. Enrique
Nanoparticles with different morphologies were added to water to study if the morphology of the nanoparticles affects the main parameters of water used as phase change material (PCM). Considered morphologies were spherical, tubes and sheets in the form of spherical carbon black nanoparticles (CB), multiwalled carbon nanotubes (MWCNT), and graphene oxide nanosheets (GO). Results demonstrate that effectively the morphology of nanoparticles affect the thermophysical properties of the nano-enhanced PCM (NePCM). Depending on the morphology of the added nanoparticle, the final NePCM will have different subcooling and thermal conductivity, whereas its phase change enthalpy is not affected and, therefore, is the same for all produced NePCM., The research leading to these results has received funding from the European Commission Seventh Framework Programme (FP/2007-2013) under grant agreement n° PIRSES-GA-2013-610692 (INNOSTORAGE) and from the European Union’s Horizon 2020 research and innovation program under grant agreement No 657466 (INPATH-TES). The authors would like to thank the Catalan Government for the quality accreditation given to their research groups GREA (2014 SGR 123), DIOPMA (2014 SGR 1543). This work has been partially funded by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER) and ENE2015-64117-C5-2-R (MINECO/FEDER)). Dr. Camila Barreneche would like to thank Ministerio de Economia y Competitividad de España for Grant Juan de la Cierva FJCI-2014-22886. This work has been developed by participants of the COST Action CA15119 Overcoming Barriers to Nanofluids Market Uptake (NANOUPTAKE).
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

PCM/wood composite to store thermal energy in passive building envelopes

  • Barreneche Güerisoli, Camila
  • Vecstaudža, Jana
  • Bajare, Diana
  • Fernández Renna, Ana Inés
The development of new materials to store thermal energy in a passive building system is a must to improve the thermal efficiency by thermal-regulating the indoor temperatures. This fact will deal with the reduction of the gap between energy supply and energy demand to achieve thermal comfort in building indoors. The aim of this work was to test properties of novel PCM/wood composite materials developed at Riga Technical University. Impregnation of PCM (phase change material) in wood increases its thermal mass and regulates temperature fluctuations during day and night. The PCM used are paraffin waxes (RT-21 and RT-27 from Rubitherm) and the wood used was black alder, the most common wood in Latvia. The PCM distribution inside wood sample has been studied as well as its thermophysical, mechanical and fire reaction properties. Developed composite materials are promising in the field of energy saving in buildings., The research leading to these results has received funding from the European Commission Seventh Framework Programme (FP/2007-2013) under grant agreement n° PIRSES-GA-2013-610692 (INNOSTORAGE) and from the European Union’s Horizon 2020 research and innovation program under grant agreement No 657466 (INPATH-TES). The authors would like to thank the Catalan Government for the quality accreditation given to their research group DIOPMA (2014 SGR 1543). This work has been partially funded by the Spanish government (ENE2015-64117-C5-2-R (MINECO/FEDER)). Dr. Camila Barreneche would like to thank Ministerio de Economia y Competitividad de España for Grant Juan de la Cierva FJCI-2014-22886.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Materials selection for thermal energy storage systems in parabolic trough collector solar facilities using high chloride content nitrate salts

  • Ruiz-Cabañas, F. Javier
  • Prieto, Cristina
  • Madina, Virginia
  • Fernández Renna, Ana Inés
  • Cabeza, Luisa F.
The increasing role of concentrated solar power (CSP) within the renewable energy portfolio is attributed to the possibility of integrating thermal energy storage (TES) systems. Then, CSP technology has become one of the most interesting clean options to deliver dispatchable power on demand. Nowadays, commercial facilities use high quality solar salts (60%:40% NaNO3 and KNO3 by weight) as storage medium due to the attractive properties of this fluid to be applied under CSP operation conditions. Taking into account that CSP installations are designed with really large TES systems containing tens of thousands of tons, the use of lower quality nitrates salts would reduce the molten salts inventory cost and finally the investment cost of the CSP storage systems at commercial scale. The most important drawback of selecting low quality nitrates salts for high temperature CSP applications is the corrosion impact produced by impurities. Accordingly, chlorides have been identified in the state of the art as the impurity with higher effect over corrosion. This work is focused on A516 Gr70 carbon steel corrosion performance evaluation under high-chlorides content nitrates salts (1.2% and 3% by weight) at 400 °C. In addition, the feasibility of using the proposed low purity mixtures with current CSP facilities materials selection is analyzed. Results reported within this study show the critical effect of chloride content over corrosion mechanism producing lack of adherence between base metal and oxides layers in addition to corrosion products delamination and internal cracking. Then, the use of A516 Gr70 carbon steel is rejected for a long term design under solar salts containing chlorides content in the range 1.2–3% by weight being necessary a higher corrosion resistant materials selection. An improved materials selection focused on higher corrosion resistance alloys is discussed., The research leading to these results has received funding from Spanish government (Fondo tecnológico IDI-20090393, ConSOLida CENIT 2008-1005). The work is partially funded by the Spanish government (ENE2011-28269-C03-02, ENE2011-22722, ENE2015-64117-C5-1-R (MINECO/FEDER), and ENE2015-64117-C5-2-R (MINECO/FEDER)). The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREA (2014 SGR 123) and research group DIOPMA (2014 SGR 1543).
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Benchmarking of useful phase change materials for a building application

  • Navarro Farré, Lidia
  • Solé, Aran
  • Martín, Marc
  • Barreneche Güerisoli, Camila
  • Olivieri, Lorenzo
  • Tenorio, José Antonio
  • Cabeza, Luisa F.
Nowadays, there is an increasing interest in more efficient building materials and new technologies to accomplish the objectives defined by energy policies. The combination of energy efficient building designs and integration of renewable energies makes the use of thermal energy storage (TES) necessary. Within this context, the improvement of building envelopes by the use of phase change materials (PCM) has been widely studied. The PCM selection should fulfil the requirements of the specific application. In this study, a benchmarking of PCM available in the market was performed to undertake a material selection for a specific building application. The incorporation of PCM into a radiant wall technology present several requirements with especial interest on long-term thermal stability. A complete laboratory-scale characterization has been carried out considering the following properties: temperature of phase change, specific heat capacity, thermal conductivity, and stability., Financiado por el proyecto RTC-2015-3583-5 (INPHASE) del Ministerio de Economía y Competitividad, dentro del Programa Estatal de Investigación, Desarrollo e Innovación Orientada a los Retos de la Sociedad, en el marco del Plan Estatal de Investigación Científica y Técnica y de Innovación 2013-2016, y ha sido cofinanciado con FONDOS FEDER, con el objetivo de promover el desarrollo tecnológico, la innovación y una investigación de calidad. The work is partially funded by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER) and ENE2015-64117-C5-2-R (MINECO/FEDER)). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537 and 2017 SGR 188). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. Camila Barreneche would like to thank ACCIO for her Grant TecnioSpring Plus TECSPR17-1-0071. Aran Solé would like to thank Ministerio de Economia y Competitividad de España for Grant Juan de la Cierva FJCI-2015-25741.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

New formulation and characterization of enhanced bulk-organic phase change materials

  • Palacios, Anabel
  • Gracia Cuesta, Alvaro de
  • Cabeza, Luisa F.
  • Julià Bolivar, José Enrique
  • Fernández Renna, Ana Inés
  • Barreneche Güerisoli, Camila
The main drawbacks faced by researchers to successfully implement organic-PCM as materials to improve the thermal performance of building systems are their low thermal conductivity, their high flammability, and their low thermal cycling stability. T In the present work, authors present a new enhanced PCM formulations aimed to solve the stated disadvantages in organic bulk-PCM. The new enhanced PCM were prepared by adding high thermal conductivity particles and two kinds of flame retardants into organic PCM (paraffin and fatty acid eutectic mixtures). In the first stage, the effective thermal conductivity of organic-PCM was increased by using two different methods: directly dispersion of powder graphite (PG) bulk-PCM and vacuum impregnation of PCM into expanded graphite (EG). In the second stage, the fire reaction behaviour of the thermal conductivity enhanced PCM formulations was improved by adding two kind of flame retardant: magnesium hydroxide and ammonium phosphate (APP).. Their fire reaction behaviour, thermal conductivity and thermophysical properties were measured by adapting the dripping test (UNE 23727-90), the hot-wire method and Differential Scanning Calorimetry (DSC), respectively. The enhanced PCM composites show a self-extinguished behaviour in terms of fire performance mechanism. The EG working with endothermic and phosphates flame retardants improve the fire performance of PCM by acting as a synergic system and the thermal conductivity is increased. However, their thermal storage capacity is significant decreased due to the large amount of flame retardant added (up to 40%). The thermal reliability was also tested, the enhanced PCM composites were stable up to 1000 thermal cycles., The research leading to these results has received funding from the European Commission Seventh Framework Programme (FP/2007-2013) under grant agreement n° PIRSES-GA-2013-610692 (INNOSTORAGE) and from the European Union's Horizon 2020 research and innovation program under grant agreement No 657466 (INPATH-TES). The authors would like to thank the Catalan Government for the quality accreditation given to their research groups GREA (2014 SGR 123), DIOPMA (2014 SGR 1543) and GICITED (2014 SGR 1298). The work partially funded by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER), ENE2015-64117-C5-2-R(MINECO/FEDER), and ENE2015-64117-C5-3-R(MINECO/FEDER)). Dr. Alvaro de Gracia and Dr. Camila Barreneche would like to thank Ministerio de Economia y Competitividad de España for Grant Juan de la Cierva, FJCI-2014-19940 and FJCI-2014-22886, respectively.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Thermogravimetric study of a phase change slurry: effect of variable conditions

  • Giro-Paloma, Jessica
  • Valle-Zermeño, Ricardo del
  • Fernández Renna, Ana Inés
  • Chimenos Ribera, Josep Ma.
  • Formosa, Joan
Microcapsules containing Phase Change Materials (MPCM) are widely used for passive systems in energy storage. When MPCM are mixed with a carrier fluid, Phase Change Slurries (PCS) are used for heat transfer fluids in active systems or heat transport systems. The thermal behavior of PCS can be measured as dry or wet basis, resulting in important differences in weight losses. This study explores the optimum conditions for analyzing the thermal behavior of dried PCS by thermogravimetric analysis (TGA) varying the parameter conditions for obtaining peak temperature and heat flow (latent heat). The factors that were taken into account were the atmosphere of study (air and nitrogen) and the heating rate (0.5, 1, 5, and 10 °C·min−1). The best conditions to determine peak temperature are at 1 °C·min−1 and in N2 atmosphere, whereas the decomposition fusion/latent heat of the sample is improved at higher heating velocities towards 10 °C·min−1., The work is partially funded by the Spanish government (ENE2015-64117-C5-2R). The research leading to these results has received funding from the European Union’s Seventh Framework Programme (FP7/2007-2013) under grant agreement No. PIRSES-GA-2013-610692 (INNOSTORAGE) and from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 657466 (INPATH-TES). Ricardo del Valle Zermeño is grateful to the Government of Catalonia for the research grant (FI-DGR 2014). The authors would like to thank the Catalan Government for the quality accreditation given to their research group DIOPMA (2014 SGR 1543).
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Considerations for the use of metal alloys as phase change materials for high temperature applications

  • Fernández Renna, Ana Inés
  • Barreneche Güerisoli, Camila
  • Belusko, Martin
  • Segarra Rubí, Mercè
  • Bruno, Frank
  • Cabeza, Luisa F.
The use of paraffin, salts and salt hydrates as phase change materials (PCMs) have been researched extensively and used in a number of commercial applications. However, metals and metal alloys, which possess a high storage density on a volume basis as well as a substantially higher thermal conductivity, has received much less attention. This paper discusses the considerations for the use of metal and metal alloys as phase change materials for high temperature thermal storage applications, as well as summarises the literature on the limited research in this area. Although some pure metals and metal alloys present interesting thermal properties to be used as PCMs in thermal storage systems, there is a lack of understanding on the implications of the metallurgical aspects related to the melting and solidification of these materials under thermal cycling at high temperatures. The main issues to be considered include vapour pressure, undercooling, corrosion, segregation, changes in composition and microstructure, changes in thermal properties and undesired reactions. Further research is needed before these materials can be used as PCMs in thermal energy storage systems in industry., The research leading to these results has received funding from the European Commission Seventh Framework Programme (FP/2007-2013) under grant agreement n° PIRSES-GA-2013-610692 (INNOSTORAGE) and from the European Union's Horizon 2020 Research and Innovation Program under grant agreement No 657466 (INPATH-TES). The authors would like to thank the Catalan Government for the quality accreditation given to their research groups GREA (2014 SGR 123) and DIOPMA (2014 SGR 1543), and also the Spanish Government for the projects ENE2015-64117-C5-1-R and ENE2015-64117-C5-2-R (MINECO/FEDER, UE). Dr. Camila Barreneche would like to thank Ministerio de Economia y Competitividad de España for Grant Juan de la Cierva, FJCI-2014-22886. This paper was produced with support from the “Premier’s Research Industry Fund - International Research Grant Program” (IRGP 33) funded by the Government of South Australia.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

TES-PS10 postmortem tests: Carbon steel corrosion performance exposed to molten salts under relevant operation conditions and lessons learnt for commercial scale-up

  • Ruiz-Cabañas, F. Javier
  • Prieto, Cristina
  • Madina, Virginia
  • Fernández Renna, Ana Inés
  • Cabeza, Luisa F.
Postmortem tests were performed over components removed from the TES-PS10 pilot plant after almost four years of continuous operation being exposed to solar salts under representative commercial operation conditions. Accordingly, corrosion performance of plates sections extracted from both storage tanks and samples cut from the hot molten salts pump were evaluated. Corrosion damage extension, oxides layers morphology, and corrosion products chemistry were analyzed by X-ray diffraction, energy dispersive X-ray spectrometry, optical microscopy, and SEM. In addition to materials compatibility with molten salts, mechanical tests were carried out over the storage tanks plates sections. Although the corrosion damage extension over the plates extracted from storage tanks was low and the mechanical properties were according to the standard, some interesting observations were seen. For example, a sample extracted from the hot storage tank and exposed to intermittent contact with molten salts showed some areas characterized by the growth of a non-protective oxide scale. Moreover, localized corrosion with slight penetration through the base material was identified for all storage plates samples under evaluation. On the other hand, the molten salt pump parts under study showed adherent and uniform oxides layers without detecting corrosion–erosion phenomena. Some cavities were found in the discharge elbow, and these imperfections were associated to a bad metallurgical quality during casting. Summarizing, corrosion phenomena suffered by the components under evaluation could be corrected in future plants by applying the lessons learned discussed in this study. As conclusion, materials selection analyzed within this postmortem evaluation is valid from the corrosion point of view to be used in the design of commercial TES systems in PTC plants., The research leading to these results has received funding from Spanish government (Fondo tecnológico IDI-20090393, ConSOLida CENIT 2008-1005). The work is partially funded by the Spanish Government (ENE2011-28269-C03-02, ENE2011-22722, ENE2015-64117-C5-1-R, and ENE2015-64117-C5-2-R). The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREiA (2017 SGR 1537) and research group DIOPMA (2017 SGR 138). GREiA and DIOPMA are certified agents TECNIO in the category of technology developers from the Government of Catalonia.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Comparación de las características mecánicas y dieléctricas de varios polímeros mezclados con caucho de neumáticos fuera de uso (GTR) para su aplicación como aislante de calzado de trabajo industrial, Comparison of the mechanical and dielectric characteristics of various polymers mixed with ground tired rubber (GTR) for its application as industrial work footwear insulator

  • Mujal-Rosas, Ramon Maria
  • Marín Genescà, Marc
  • Garcia Amoros, Jordi
  • Colom Fajula, Xavier
  • Salueña Berna, Javier
La masiva fabricación de neumáticos y su dificultad para su posterior reciclaje, representa hoy por hoy, un grave problema medio ambiental. Existen varios métodos para intentar reciclar los neumáticos usados, uno de ellos consiste en su separación mecánica, en el cual el caucho vulcanizado se separa del acero y de las fibras, lo que da como resultado un caucho que puede presentarse molido en pequeñas partículas (Ground Tire Rubber, o GTR). Este caucho puede utilizarse en diversas aplicaciones, como la que presenta esta investigación, en la cual una vez mezclado con polimeros de uso habitual, ha de servir para la fabricación de los aislamientos para calzado industrial de trabajo. Por tanto, el objetivo de este estudio, pasa por evaluar los resultados de mezclar estas partículas de GTR con varias matrices poliméricas de uso habitual (polimero+GTR), comprobando que tanto sus propiedades mecánicas como dieléctricas cumplen con las normas establecias para la fabricación de los aislamientos para zapatos de uso industrial. El análisis se llevará a cabo utilizando siete matrices poliméricas mezcladas con diferentes concentraciones de GTR., Esta investigación fue financiada por el MINISTERIO DE ECONOMIA Y COMPETITIVIDAD, Gobierno de España ENE2015-64117-C5-3-R (MINECO/FEDER)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Embodied energy and cost of high temperature thermal energy storage systems for use with concentrated solar power plants

  • Jacob, Rhys
  • Belusko, Martin
  • Fernández Renna, Ana Inés
  • Cabeza, Luisa F.
  • Saman, Wasim
  • Bruno, Frank
The intermittency of renewable energy systems remains one of the major hurdles preventing a large scale uptake of these technologies and concentrated solar power (CSP) systems are no different. However, CSP has the benefit of being able to store excess heat using thermal energy storage (TES). For the uptake of CSP with TES it must be demonstrated that the technology is both economically as well as environmentally feasible. This paper aims to investigate the economic and environmental impact of several TES options that are available for CSP systems. The investigated systems include an encapsulated phase change material (PCM) system, a coil-in-tank PCM system and a liquid sodium TES system. The economic impact in the current study refers to the capital cost (CAPEX) of each system including the tank, storage material, encapsulation cost (if applicable) and allowances for construction and engineering. The environmental impact of each system is accounted by calculating the embodied energy of each of the system components. Each storage system will be required to store a comparable amount of energy so that reliable conclusions can be drawn. The results from this analysis conclude that the encapsulated PCM (EPCM) and coil-in-tank system represent an embodied energy of roughly one third of the corresponding state-of-the-art two-tank molten salt system. Furthermore, the EPCM and coil-in-tank systems result in CAPEX reductions of 50% and 25% over the current state-of-the-art two-tank molten salt system. The liquid sodium system was found to result in higher embodied energy and CAPEX than any previously studied TES system. Finally, the advantages and disadvantages of each system was discussed and compared to previous literature., This research was performed as part of the Australian Solar Thermal Research Initiative (ASTRI), a project supported by the Australian Government, through the Australian Renewable Energy Agency (ARENA). The work is partially funded by the Spanish Government (ENE2015-64117-C5-1-R and ENE2015-64117-C5-2-R). The authors would like to thank the Catalan Government for the quality accreditation given to the research group GREA (2014 SGR 123) and DIOPMA (2014 SGR 1543). The research leading to these results has received funding from the European Union’s Seventh Framework Programme (FP7/2007-2013) under grant agreement n° PIRSES-GA-2013-610692 (INNOSTORAGE).
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Steam-PCM heat exchanger design and materials optimization by using Cr-Mo alloys

  • Ruiz-Cabañas, F. Javier
  • Prieto, Cristina
  • Jové, Aleix
  • Madina, Virginia
  • Fernández Renna, Ana Inés
  • Cabeza, Luisa F.
A387 Gr 91 Cr-Mo alloy corrosion compatibility with LiOH-KOH mixture was evaluated at 315 °C (Test#1) and 360 °C (Test#2). This alloy is studied for a techno-economical optimization of a steam-PCM heat exchanger proposed in the thermal energy storage (TES) system of a direct steam generation (DSG) facility. The corrosion damage was analyzed with visual inspection, optical microscopy, SEM, EDS and XRD, and corrosion rates were also calculated. A387 Gr 91 alloy generates protective oxide layers over base metal. Localized corrosion damages were not detected with these test conditions, while XRD and EDS profiles showed CrO and LiFeO2 as main corrosion products generated by this alloy. On the other hand, corrosion rates decrease with exposure time showing the passivation of the alloy. A387 Gr 91 corrosion performance was compared with A316L stainless steel, which was preliminary proposed by the authors in previous studies. In addition to corrosion performance, parameters such as cost, thermal properties, and mechanical properties are discussed. In conclusion, the use of A387 Gr 91 instead to A316L alloy for the construction of the steam-PCM heat exchanger involves the technoeconomical optimization of the equipment., The research leading to these results has received funding from CDTI in the project Innterconecta Thesto (ITC-20111050). The work is partially funded by the Spanish government (ENE2015-64117-C5-1-R, and ENE2015-64117-C5-2-R). The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREA (2014 SGR 123) and research group DIOPMA (2014 SGR 1543). The research leading to these results has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No 657466 (INPATH-TES).