Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

TECNALIA Publications
Publication Artículo científico (JournalArticle)

Multi-Criteria Selection of Additives in Porous Asphalt Mixtures Using Mechanical, Hydraulic, Economic, and Environmental Indicators

  • Gupta, Anik
  • Slebi-Acevedo, Carlos J.
  • Lizasoain-Arteaga, Esther
  • Rodriguez-Hernandez, Jorge
  • Castro-Fresno, Daniel
Porous asphalt (PA) mixtures are more environmentally friendly but have lower durability than dense-graded mixtures. Additives can be incorporated into PA mixtures to enhance their mechanical strength; however, they may compromise the hydraulic characteristics, increase the total cost of pavement, and negatively affect the environment. In this paper, PA mixtures were produced with 5 different types of additives including 4 fibers and 1 filler. Their performances were compared with the reference mixtures containing virgin bitumen and polymer-modified bitumen. The performance of all mixes was assessed using: mechanical, hydraulic, economic, and environmental indicators. Then, the Delphi method was applied to compute the relative weights for the parameters in multi-criteria decision-making methods. Evaluation based on distance from average solution (EDAS), technique for order of the preference by similarity to ideal solution (TOPSIS), and weighted aggregated sum product assessment (WASPAS) were employed to rank the additives. According to the results obtained, aramid pulp displayed comparable and, for some parameters such as abrasion resistance, even better performance than polymer-modified bitumen, whereas cellulose fiber demonstrated the best performance regarding sustainability, due to economic and environmental benefits.
Digibug. Repositorio Institucional de la Universidad de Granada
Publication Artículo científico (JournalArticle)

Self-powered weigh-in-motion system combining vibration energy harvesting and self-sensing composite pavements

  • Borke Birgin, Hasan
  • García Macías, Enrique|||0000-0001-5557-144X
  • D’Alessandro, Antonella
  • Ubertini, Filippo
Overloaded vehicles are the primary cause of accelerated degradation of road infrastructures. In this context, although weigh-in-motion (WIM) systems are most efficient to enforce weight regulations, current technologies require costly investments limiting their extensive implementation. Recent advances in multifunctional composites enabled cost-efficient alternatives in the form of smart pavements. Nevertheless, the need for a stable power supply still represents a major practical limitation. This work presents a novel proof-of-concept self-sustainable WIM technology combining smart pavements and vibration-based energy harvesting (EH). The feasibility of piezoelectric bimorph cantilevered beams to harvest traffic-induced vibrations is firstly investigated, followed by the demonstration of the proposed technology under laboratory conditions. The main original contributions of this work comprise (i) the development of a new self-powered data acquisition system, (ii) a novel approach for the fabrication and electromechanical testing of the piezoresistive composite pavement, and (iii) laboratory feasibility analysis of the developed EH unit to conduct traffic load identification through electrical resistivity measurements of the smart pavement. While the presented results conclude the need for dense EH networks or combinations of different EH technologies to attain complete self-sustainability, this work represents an initial feasibility evidence paving the way towards the development of self-powered low-cost WIM systems., Marie Skłodowska-Curie Innovative Training Network (MSCA ITN) ‘‘SAFERUP!’’ project (Grant Agreement No. 765057), Fondo integrativo speciale per la ricerca (FISR) to develop autonomous sensing systems based on smart materials, Funding for open access charge: Universidad de Granada / CBUA
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Effect of PCM on the Hydration Process of Cement-Based Mixtures: A Novel Thermo-Mechanical Investigation

  • Fabiani, Claudia
  • Pisello, Anna Laura
  • D'Alessandro, Antonella
  • Ubertini, Filippo
  • Cabeza, Luisa F.
  • Cotana, Franco
The use of Phase Change Material (PCM) for improving building indoor thermal comfort and energy saving has been largely investigated in the literature in recent years, thus confirming PCM's capability to reduce indoor thermal fluctuation in both summer and winter conditions, according to their melting temperature and operation boundaries. Further to that, the present paper aims at investigating an innovative use of PCM for absorbing heat released by cement during its curing process, which typically contributes to micro-cracking of massive concrete elements, therefore compromising their mechanical performance during their service life. The experiments carried out in this work showed how PCM, even in small quantities (i.e., up to 1% in weight of cement) plays a non-negligible benefit in reducing differential thermal increases between core and surface and therefore mechanical stresses originating from differential thermal expansion, as demonstrated by thermal monitoring of cement-based cubes. Both PCM types analyzed in the study (with melting temperatures at 18 and 25 ºC) were properly dispersed in the mix and were shown to be able to reduce the internal temperature of the cement paste by several degrees, i.e., around 5 ºC. Additionally, such small amount of PCM produced a reduction of the final density of the composite and an increase of the characteristic compressive strength with respect to the plain recipe., Funding: The research leading to these results has received funding from the European Union’s Horizon 2020 research and innovation program under Grant agreement No. 657466 (INPATH-TES) and No. 765057 (SaferUp!). The authors also thank the Microtek Laboratories, Inc. for providing the capsulated materials. The work is also partially funded by the Spanish government (ENE2015-64117-C5-1-R). Acknowledgments: Acknowledgments are due to the “CIRIAF program for UNESCO” in the framework of the UNESCO Chair “Water Resources Management and Culture”. Luisa F. Cabeza would like to thank the Catalan Government for the quality accreditation given to her research group (2017 SGR 1537).
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Effect of PCM on the Hydration Process of Cement-Based Mixtures: A Novel Thermo-Mechanical Investigation

  • Fabiani, Claudia
  • Pisello, Anna Laura
  • D'Alessandro, Antonella
  • Ubertini, Filippo
  • Cabeza, Luisa F.
  • Cotana, Franco
The use of Phase Change Material (PCM) for improving building indoor thermal comfort and energy saving has been largely investigated in the literature in recent years, thus confirming PCM's capability to reduce indoor thermal fluctuation in both summer and winter conditions, according to their melting temperature and operation boundaries. Further to that, the present paper aims at investigating an innovative use of PCM for absorbing heat released by cement during its curing process, which typically contributes to micro-cracking of massive concrete elements, therefore compromising their mechanical performance during their service life. The experiments carried out in this work showed how PCM, even in small quantities (i.e., up to 1% in weight of cement) plays a non-negligible benefit in reducing differential thermal increases between core and surface and therefore mechanical stresses originating from differential thermal expansion, as demonstrated by thermal monitoring of cement-based cubes. Both PCM types analyzed in the study (with melting temperatures at 18 and 25 ºC) were properly dispersed in the mix and were shown to be able to reduce the internal temperature of the cement paste by several degrees, i.e., around 5 ºC. Additionally, such small amount of PCM produced a reduction of the final density of the composite and an increase of the characteristic compressive strength with respect to the plain recipe., Funding: The research leading to these results has received funding from the European Union’s Horizon 2020 research and innovation program under Grant agreement No. 657466 (INPATH-TES) and No. 765057 (SaferUp!). The authors also thank the Microtek Laboratories, Inc. for providing the capsulated materials. The work is also partially funded by the Spanish government (ENE2015-64117-C5-1-R). Acknowledgments: Acknowledgments are due to the “CIRIAF program for UNESCO” in the framework of the UNESCO Chair “Water Resources Management and Culture”. Luisa F. Cabeza would like to thank the Catalan Government for the quality accreditation given to her research group (2017 SGR 1537).
UCrea Repositorio Abierto de la Universidad de Cantabria
Publication Artículo científico (JournalArticle)

Laboratory Characterization of Porous Asphalt Mixtures with Aramid Fibers

  • Gupta, Anik|||0000-0002-8941-0780
  • Lastra González, Pedro|||0000-0002-4573-6973
  • Castro Fresno, Daniel|||0000-0001-5658-3901
  • Rodríguez Hernández, Jorge|||0000-0003-1596-4024
ABSTRACT: Recent studies have shown that fibers improve the performance of porous asphalt mixtures. In this study, the influence of four different fibers, (a) regular aramid fiber (RegAR), (b) aramid fiber with latex coating (ARLat), (c) aramid fiber with polyurethane coating (ARPoly), (d) aramid fiber of length 12 mm (AR12) was evaluated on abrasion resistance and toughness of the mixtures. The functional performance was estimated using permeability tests and the mechanical performance was evaluated using the Cantabro test and indirect tensile strength tests. The parameters such as fracture energy, post cracking energy, and toughness were obtained through stress-strain plots. Based on the analysis of results, it was concluded that the addition of ARLat fibers enhanced the abrasion resistance of the mixtures. In terms of ITS, ARPoly and RegAR have positively influenced mixtures under dry conditions. However, the mixtures with all aramid fibers were found to have adverse effects on the ITS under wet conditions and energy parameters of porous asphalt mixtures with the traditional percentages of bitumen in the mixture used in Spain (i.e., approximately 4.5%)., This work and the APC are funded by SAFERUP! Project, from the European Union’s Horizon 2020 research and innovation program under, the Marie Skłodowska-Curie grant agreement No. 765057.
UCrea Repositorio Abierto de la Universidad de Cantabria
Publication Artículo científico (JournalArticle)

Incorporation of Additives and Fibers in Porous Asphalt Mixtures: A Review

  • Gupta, Anik|||0000-0002-8941-0780
  • Rodríguez Hernández, Jorge|||0000-0003-1596-4024
  • Castro Fresno, Daniel|||0000-0001-5658-3901
Despite the numerous benefits for preserving the hydrological cycle, permeable pavement systems (PPSs) found their major application in parking spots and for light traffic scenarios due to their limited durability and strength. To make the PPSs suitable for heavy traffic conditions without significant distresses, research is shifting toward the adoption of novel binders and additives for designing multifunctional porous asphalt mixtures which make up the surface course of PPSs. Certain additives are well known for enhancing the durability of dense graded asphalt mixtures and improving fatigue and rutting resistance. However, the studies on the influence of additives on abrasion resistance and binder draindown, which are the common problems in porous asphalt mixtures (PAMs), are still not well established. This paper summarizes best practices performed on PAMs and recommends possible future research directions for its improvement. Particular emphasis is placed on strength and resilience of PAMs by incorporating additives like nanosilica, crumb rubber, warm-mix additives, fibers (such as cellulose, glass, steel, and synthetic fibers), and some eco-friendly materials. It was found that different additives seem to have different effects on the properties of PAMs. Moreover, the combination of additives has synergistic benefits for the performance of PAMs, especially in urban pavements., This project is funded by SAFERUP! from the European Union’s Horizon 2020 research and innovation program under the Marie Skłodowska-Curie grant agreement No. 765057.
UCrea Repositorio Abierto de la Universidad de Cantabria
Publication Artículo científico (JournalArticle)

Multi-Criteria Selection of Additives in Porous Asphalt Mixtures Using Mechanical, Hydraulic, Economic, and Environmental Indicators

  • Gupta, Anik|||0000-0002-8941-0780
  • Slebi Acevedo, Carlos José
  • Lizasoain Arteaga, Esther
  • Rodríguez Hernández, Jorge|||0000-0003-1596-4024
  • Castro Fresno, Daniel|||0000-0001-5658-3901
ABSTRACT: Porous asphalt (PA) mixtures are more environmentally friendly but have lower durability than dense-graded mixtures. Additives can be incorporated into PA mixtures to enhance their mechanical strength; however, they may compromise the hydraulic characteristics, increase the total cost of pavement, and negatively affect the environment. In this paper, PA mixtures were produced with 5 different types of additives including 4 fibers and 1 filler. Their performances were compared with the reference mixtures containing virgin bitumen and polymer-modified bitumen. The performance of all mixes was assessed using: mechanical, hydraulic, economic, and environmental indicators. Then, the Delphi method was applied to compute the relative weights for the parameters in multi-criteria decision-making methods. Evaluation based on distance from average solution (EDAS), technique for order of the preference by similarity to ideal solution (TOPSIS), and weighted aggregated sum product assessment (WASPAS) were employed to rank the additives. According to the results obtained, aramid pulp displayed comparable and, for some parameters such as abrasion resistance, even better performance than polymer-modified bitumen, whereas cellulose fiber demonstrated the best performance regarding sustainability, due to economic and environmental benefits., This work and the APC are funded by SAFERUP! Project, from the European Union’s Horizon 2020 research and innovation program under, the Marie Skłodowska-Curie grant agreement No. 765057.
UCrea Repositorio Abierto de la Universidad de Cantabria
Publication Artículo científico (JournalArticle)

Selection of fibers to improve porous asphalt mixtures using multi-criteria analysis

  • Gupta, Anik|||0000-0002-8941-0780
  • Castro Fresno, Daniel|||0000-0001-5658-3901
  • Lastra González, Pedro|||0000-0002-4573-6973
  • Rodríguez Hernández, Jorge|||0000-0003-1596-4024
ABSTRACT: Aramid fibers and glass fibers are widely used in dense-graded asphalt mixtures to improve the mechanical characteristics. However, their effect on the characteristics of porous asphalt mixtures has not been widely explored. This study evaluated the influence of aramid fiber, aramid pulp, glass-hybrid fiber, and cellulose fiber to improve the abrasion resistance and strength of the porous asphalt mixtures while maintaining their functional characteristics. The performance of PA-16 mixtures incorporated with fibers was evaluated using the Cantabro test, permeability test, indirect tensile strength (ITS) test, and moisture susceptibility test. Finally, a multi-criteria decision method (MCDM), weighted aggregated sum product assessment (WASPAS) in combination with criteria importance through inter-criteria correlation (CRITIC) as a weighting method, is applied to make a multifaceted decision and select the best option among the variety of fibers included in the study. Results concluded aramid pulp remarkably enhanced the abrasion resistance while glass-hybrid fibers improved the ITS of the mixtures. Particularly, aramid pulp was selected as the best fiber to improve the mechanical resistance, according to the proposed methodology., This work was possible thanks to the research project entitled ‘Resilient and sustainable Permeable Pavements For Urban Flood Mitigation (RePP4FM). This project is funded by SAFERUP! from the European Union’s Horizon 2020 research and innovation program under the Marie Skłodowska-Curie grant agreement No. 765057.
UCrea Repositorio Abierto de la Universidad de Cantabria
Publication Contribución de congreso (ConferenceOutput)

Improving porous asphalt mixes by incorporation of additives

  • Gupta, Anik|||0000-0002-8941-0780
  • Rodríguez Hernández, Jorge|||0000-0003-1596-4024
  • Slebi Acevedo, Carlos José
  • Castro Fresno, Daniel|||0000-0001-5658-3901
UCrea Repositorio Abierto de la Universidad de Cantabria
Publication Tesis doctoral (DoctoralThesis)

Estudio para la mejora de mezclas asfálticas porosas con una selección multicriterio de aditivos y un nuevo betún modificado con polímeros, Study for improvement of porous asphalt mixtures with a multi-criteria selection of additives and a new polymer modified bitumen

  • Gupta, Anik|||0000-0002-8941-0780
RESUMEN Las mezclas de asfalto porosas son más silenciosas y seguras debido a su alta reducción de ruido y características de resistencia al deslizamiento que mezclas densas graduadas. Sin embargo, estas mezclas son más propensas a sufrir daños, como desgaste, formación de baches, etc. A pesar de sus muchos beneficios, las limitaciones de las mezclas de asfalto poroso limitan su uso. Por ello, se realizan continuas investigaciones para potenciar la resistencia mecánica de las mezclas asfálticas porosas para que su uso pueda ser más extendido. Se está estudiando si la adición directa de aditivos o la incorporación de betún modificado puede ser útil para mejorar la resistencia al desgaste y la capacidad portante de las mezclas asfálticas porosas. En el presente estudio, se pretende encontrar soluciones novedosas y sostenibles para contribuir a la mejora de las mezclas asfálticas porosas. En la primera fase de esta investigación, se calculó la influencia de variedad de aditivos en el desempeño mecánico, hidrológico, económico y ambiental de las mezclas asfálticas porosas. En la segunda fase, se preparó un nuevo betún experimental para satisfacer los requisitos de las mezclas asfálticas porosas y se evaluaron sus propiedades físicas y reológicas. Además, se realizó un análisis multi-criterio para la toma de decisiones entre los distintos aditivos utilizados en el estudio, asignando un valor unificado considerando el desempeño general. Como principales conclusiones destacan la completa caracterización de las mejoras que ofrecen varios aditivos a las mezclas bituminosas porosas y el desarrollo de un nuevo betún modificado., ABSTRACT Porous asphalt (PA) mixtures are more environmentally friendly but have lower durability than dense-graded mixtures. Additives can be incorporated into PA mixtures to enhance their mechanical strength; however, they may compromise the hydraulic characteristics, increase the total cost of pavement, and negatively affect the environment. In this thesis, mixtures were produced with many additives such as aramid fibers, glass fibers, hydrated lime etc. Additionally, a new experimental bitumen was fabricated with high vinyl SBS content. The performances were compared with the reference mixtures containing virgin bitumen and commercial polymer-modified bitumen. The performance of all mixes was assessed using: mechanical, hydraulic, economic, and environmental indicators. Then, the Delphi and CRITIC method were applied to compute the relative weights for the parameters in multi-criteria decision-making methods. It was found that the most promising fibers with considerable impact on the abrasion resistance were aramid pulp, which almost halved the particle loss. The lowest environmental impact was caused by the incorporation of cellulose fibers. Meanwhile, the experimental bitumen prepared using high-vinyl SBS copolymer had higher stiffness, better fatigue behavior and higher creep recovery than the commercially used polymer modified bitumen., Funding: the accomplishment of this thesis has been possible thanks to “Sustainable, Accessible, Safe, Resilient and Smart Urban Pavements” (SAFERUP!) Project, from the European Union’s Horizon 2020 research and innovation program under, the Marie Skłodowska-Curie grant agreement No. 765057.
RUO. Repositorio Institucional de la Universidad de Oviedo
Publication Artículo científico (JournalArticle)

The biosorption of mercury by permeable pavement biofilms in stormwater attenuation

  • Fathollahi, A.
  • Coupe, S. J.
  • El-Sheikh, A. H.
  • Sañudo Fontaneda, Luis Ángel|||0000-0002-1532-939X
This project has received funding from the European Union's Horizon 2020 - Research and Innovation Framework Programme under the Marie Sklodowska-Curie grant No 765057 , project name SAFERUP!