Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

High-performance starch biocomposites with celullose from waste biomass: Film properties and retrogradation behaviour

  • Benito González, Isaac
  • López-Rubio, Amparo
  • Martínez Sanz, Marta
In this work, the effects of relative humidity (RH) pre-conditioning (53% vs. 85% RH) and incorporation of cellulose fillers (from Posidonia waste biomass) on the properties and retrogradation of melt compounded starch biocomposites were investigated. Pre-conditioning at 85% RH promoted starch gelatinization during processing, leading to more amorphous materials with reduced stiffness but better barrier properties. Furthermore, these films were less stable upon storage due to greater starch retrogradation. Cellulose incorporation improved significantly the mechanical and water barrier performance, especially in the films pre-conditioned at 85% RH due to enhanced filler dispersion. Although incomplete gelatinization of the starch pre-conditioned at 53% RH led to films with bigger cellulose aggregates, their mechanical and water barrier properties were better, outperforming starch-cellulose biocomposites typically reported in the literature. Moreover, the presence of cellulose limited the degree of starch retrogradation upon storage, highlighting the potential of Posidonia biomass as a cheap source of high-performance fillers., This work was financially supported by the project GV/2018//149, the “Agencia Estatal de Investigación” and co-funded by the European Union’s Horizon 2020 research and innovation programme (ERA-Net SUSFOOD2). Marta Martinez-Sanz is recipient of a Juan de la Cierva (IJCI-2015-23389) contract from the Spanish Ministry of Economy, Industry and Competitiveness., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Development of food packaging bioactive aerogels through the valorization of Gelidium sesquipedale seaweed

  • de Oliveira, Jean Paulo
  • Pinheiro Bruni, Graziella
  • Fabra, María José
  • da Rosa Zavareze, Elessandra
  • López-Rubio, Amparo
  • Martínez Sanz, Marta
This study presents the valorization of the Gelidium sesquipedale seaweed for the development of bioactive aerogels with interest in food packaging applications. The raw seaweed was used to extract cellulose, highly crystalline (Xc∼70%) and high aspect ratio (∼40) nanocellulose and an agar-based extract, rich in polyphenols and with antioxidant capacity. Subsequently, pure PVA and hybrid aerogels containing cellulose and nanocellulose were produced by a physical cross-linking method. The presence of hydroxyl groups provided by the high aspect ratio of nanocellulose promoted the interactions with water and facilitated the accessibility of moisture towards the interior of the aerogels, hence generating high water sorption capacity materials. The agar-based extract was then incorporated into selected formulations and the release in hydrophobic and hydrophilic food simulant media was investigated. Pure PVA aerogels dissolved in aqueous media, resulting in an immediate release of the bioactive. Interestingly, the hybrid aerogels containing cellulose and nanocellulose preserved their integrity and provided a more gradual release. Although the hybrid aerogels presented similar release profiles during the first 48 h, the presence of nanocellulose led to greater release values after more prolonged times. This shows the promising properties of hybrid PVA/cellulose/nanocellulose aerogels as matrices for the controlled release of bioactive compounds in food systems, which could be of interest for the development of bioactive packaging structures., This work was financially supported by the “Agencia Estatal de Investigación” and co-funded by the European Union’s Horizon 2020 research and innovation programme (ERA-Net SUSFOOD2). Marta Martinez-Sanz is recipient of a Juan de la Cierva (IJCI-2015-23389) contract from the Spanish Ministry of Economy, Industry and Competitiveness. Jean Paulo de Oliveira and Graziella Pinheiro Bruni were funded by CAPES (88887.124727/2014–00) doctoral scholarship., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Cellulose nanocrystal-based films produced by more sustainable extraction protocols from Posidonia oceanica waste biomass

  • Benito González, Isaac
  • López-Rubio, Amparo
  • Gavara, Rafael
  • Martínez Sanz, Marta
Simplified extraction procedures (avoiding Soxhlet treatment and/or hemicellulose removal) were evaluated to valorize waste biomass from Posidonia oceanica leaves, obtaining cellulosic fractions and nanocrystals, which were subsequently used to produce films from their aqueous suspensions. Cellulose purification significantly improved mechanical and barrier properties of the films obtained from the fractions, while the extracted nanocrystals yielded films with remarkably improved properties, outperforming most benchmark biopolymers. The lipids initially present in the fractions without Soxhlet treatment were not completely digested by the hydrolysis treatment, having a positive impact on the water vapor permeability of the films (up to 63% drop), although negatively impacting oxygen permeability (increased by 20–30-fold). On the contrary, some hemicelluloses present in the less purified fractions, strongly interacting with cellulose, remained in the extracted nanocrystals leading to enhanced mechanical properties (45% higher tensile strength and 2-fold increase in the elongation at break), but lower water barrier (up to 70% higher permeability than the pure cellulose nanocrystals) due to their hydrophilic character. Films produced from the less purified nanocrystals showed the best compromise between mechanical and barrier performance, while offering a great advantage in terms of sustainability and reduced costs., This work was financially supported by the project GV/2018//149, the “Agencia Estatal de Investigación” and co-funded by the European Union’s Horizon 2020 research and innovation programme (ERA-Net SUSFOOD2). Marta Martínez-Sanz is recipient of a Juan de la Cierva (IJCI-2015-23389) contract from the Spanish Ministry of Economy, Industry and Competitiveness., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Advanced structural characterisation of agar-based hydrogels: Rheological and small angle scattering studies

  • Martínez Sanz, Marta
  • Ström, Anna
  • López Sánchez, Patricia
  • Knutsen, Svein Halvor
  • Ballance, Simon
  • Zobel, Hanne Kristine
  • Sokolova, Anna
  • Gilbert, Elliot Paul
  • López-Rubio, Amparo
Agar-based extracts from Gelidium sesquipedale were generated by heat and combined heat-sonication, with and without the application of alkali pre-treatment. Pre-treatment yielded extracts with greater agar contents; however, it produced partial degradation of the agar, reducing its molecular weight. Sonication produced extracts with lower agar contents and decreased molecular weights. A gelation mechanism is proposed based on the rheological and small angle scattering characterization of the extracts. The formation of strong hydrogels upon cooling was caused by the association of agarose chains into double helices and bundles, the sizes of which depended on the agar purity and molecular weight. These different arrangements at the molecular scale consequently affected the mechanical performance of the obtained hydrogels. Heating of the hydrogels produced a gradual disruption of the bundles; weaker or smaller bundles were formed upon subsequent cooling, suggesting that the process was not completely reversible., Synchrotron experiments were performed at NCD beamline at ALBA Synchrotron with the collaboration of ALBA staff (2018022638 project). This work was financially supported by the “Agencia Estatal de Investigación” (PCI2018-092886 Grant) and co-funded by the European Union’s Horizon 2020 research and innovation programme (ERA-Net SUSFOOD2). Part of this work was supported by the COST Action ES1408 European network for algal-bioproducts (EUALGAE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

PLA coating improves the performance of renewable adsorbent pads based on cellulosic aerogels from aquatic waste biomass

  • Benito González, Isaac
  • López-Rubio, Amparo
  • Gómez-Mascaraque, Laura G.
  • Martínez Sanz, Marta
Lightweight, hydrophobic, adsorbent pads based on aerogels from different cellulosic and nanocellulosic fractions extracted from Posidonia oceanica waste biomass were developed by a simple freeze-drying and PLA dipping method. The pure (nano)cellulosic aerogels presented highly porous structures, capable of adsorbing large amounts of oil (up to ∼34 g oil/g aerogel); however, they lost their integrity when soaked in water. The incorporation of PLA hydrophobized the aerogels and improved significantly their mechanical performance (up to 10-fold increase in the compression stress). The most porous aerogel structures, obtained with the lowest (nano)cellulosic concentrations and with the less purified fractions, incorporated greater amounts of PLA upon dipping, which was mostly distributed filling in the pores. All the PLA-coated (nano)cellulosic aerogels presented a hydrophobic behavior, with contact angles of 95-130° and selectively adsorbing greater amounts of oil (5.9-9.2 g oil/g aerogel) than water (2.8-6.7 g H2O/g aerogel). These materials present a great potential as adsorbent pads for oil spill cleaning and food packaging applications., This work was financially supported by the project RTI2018-094408-J-I00 from the Spanish Ministry of Science, Innovation and Universities, the “Agencia Estatal de Investigación” and co-funded by the European Union’s Horizon 2020 research and innovation programme (ERA-Net SUSFOOD2). Isaac Benito-Gonzalez was recipient of an Erasmus Plus grant (European programme) from the Polytechnic University of Valencia (UPV) in order to carry out part of the experimental work at Teagasc (Fermoy, Ireland)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of biopolymer matrices on lactose hydrolysis by enzymatically active hydrogel and aerogels loaded with β-galactosidase nanoflowers

  • Fabra, María José
  • Talens Perales, David
  • Román Sarmiento, Adrián
  • López-Rubio, Amparo
  • Polaina Molina, Julio
In this work, enzymatically active polysaccharide-based hydrogels and aerogels have been developed. To this end, a thermostable β-galactosidase (TmLac) enzyme from Thermotoga maritima embedded in nanoflowers’ format was used to evaluate the capacity of the hydrogel matrices to preserve the hydrolytic activity of the enzyme and the reusability of the hydrogels formed. Commercial agar, unpurified agar and agarose were compared as supporting materials. Although the developed hydrogel capsules can be used at high temperature (75 °C) and reused for the digestion of lactose to a greater extent than the free nanoflowers, loaded hydrogel capsules behaved differently depending on the type of polysaccharide used. Commercial agar was the most promising one since these hydrogel capsules could be reused, maintaining the structural integrity and reaching higher enzymatic activity (after seven cycles at 75 °C) than the free TmLac-Ca2+ nanoflowers. To facilitate handling and storage, aerogels were developed by freeze-drying the hydrogel capsules. Aerogels of agarose and unpurified agar underwent structural changes during freeze-drying that adversely affected their subsequent use, losing their integrity after being rehydrated. However, commercial agar aerogels were successfully developed and reused thanks to the existing interactions with TmLac-Ca2+ nanoflowers (confirmed by FTIR), which resulted in better capsule integrity and enzyme protection. The hydrolytic activity of enzymatically active aerogels based on commercial agar was in the same range of the free TmLac and TmLac-Ca2+ nanoflowers, being significantly higher to their counterparts in the hydrated form (hydrogels based on commercial agar)., This research was supported by grants from Spain's ‘Secretaría de Estado de Investigación, Desarrollo e Innovación' (AGL2016-75245-R), Agencia Estatal de Investigación (AEI, Grant PCI2018-092886) and cofunded by the European Union's Horizon 2020 research and innovation programme (ERA-Net SUSFOOD2). MJF was supported by a Ramon y Cajal contract (RYC2014-15842) from the Spanish Ministerio de Economia; Industria y Competitividad., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Valorisation of vine shoots for the development of cellulose-based biocomposite films with improved performance and bioactivity

  • Benito González, Isaac
  • Jaén Cano, C.M.
  • López-Rubio, Amparo
  • Martínez-Abad, Antonio
  • Martínez Sanz, Marta
This work reports on the valorization of Tempranillo vine shoots for the development of bio-based packaging materials. Cellulose (F3) and nanocellulose (NANO F3) were produced by the conventional method, while less purified cellulosic fractions (F2A) and nanocrystals (NANO F2A) were extracted by simplified protocols (omitting Soxhlet and alkaline treatments) to reduce production costs and environmental impact and evaluate the potential added functionalities of these less purified materials. Although most of the hemicelluloses in F2A were digested upon acid hydrolysis, a small fraction remained in NANO F2A. On the other hand, the presence of a minor xylan fraction in F3 limited the access of sulphuric acid towards the cellulose microfibrils, hindering hydrolysis and producing heterogeneous fibrillar structures in NANO F3. The obtained materials were used to produce cellulosic films, as well as blends with agar, and their performance properties were evaluated. Overall, NANO F2A films showed the best compromise between performance and sustainability and presented additional antioxidant capacity. The properties of the films could be adjusted by the incorporation of agar, improving their ductility and water permeability., This work was financially supported by the project RTI2018-094408-J-I00 from the Spanish Ministry of Science, Innovation and Universities, the “Agencia Estatal de Investigación” and co-funded by the European Union's Horizon 2020 research and innovation programme (ERA-Net SUSFOOD2). A. Martinez-Abad acknowledges the Spanish Ministry of Science, Innovation and University, as a recipient of a Juan de la Cierva contract (IJDC-2017-31255)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Sustainable starch biocomposite films fully-based on white rice (Oryza sativa) agroindustrial by-products

  • Benito González, Isaac
  • Ortiz-Gimeno, María del Mar
  • López-Rubio, Amparo
  • Martínez-Abad, Antonio
  • Garrido Fernández, A.
  • Martínez Sanz, Marta
In this work, starch biocomposites fully-based on the valorization of white rice agroindustrial by-products have been produced by melt mixing. The film matrix consisted on rice flour (RF) or rice starch (RS) obtained, which was reinforced with cellulose-rich nanocrystals obtained through simplified extraction processes from rice husks (CN-RH) and rice straw (CN-RW). The presence of impurities in RF induced the re-crystallization of starch, producing more crystalline films with better mechanical performance, but greater water vapor permeability than RS. This was overcome by the addition of 15% (w/w) cellulosic nanocrystals. Moreover, the cellulosic nanocrystals increased the stiffness of the films, with the CN-RW yielding better mechanical performance due to their more homogeneous morphology and distribution within the RF matrix. Interestingly, all the RF films showed remarkable antioxidant capacity (>20% inhibition of β-carotene bleaching), highlighting the potential of less purified materials to develop sustainable food packaging with additional functionalities., M. M. Ortiz-Gimeno was recipient of a JAE-Intro grant from CSIC (JAEINT20_EX_0182) and A. Martínez-Abad is recipient of a Juan de la Cierva Incorporación contract (IJDC-2017-31255) from the Spanish Ministry of Economy, Industry and Competitiveness. This work was also financially supported by the RTI2018-094408-J-I00 project (MCIU/AEI/FEDER,UE) and the BIOCARB-4-FOOD project granted by the “Agencia Estatal de Investigación” and co-funded by the European Union’s Horizon 2020 research and innovation programme (ERA-Net SUSFOOD2)., Peer reviewed