Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis doctoral (DoctoralThesis)

Valorization of Marine Biomass for the Development of Biopolymeric Materials and Additives with Functional Properties, Valorización de biomasa marina para el desarrollo de materiales biopoliméricos y aditivos con propiedades funcionales

  • Cebrián Lloret, Vera
[ES] Esta tesis doctoral se centró en la valorización de diferentes fuentes de biomasa marina para desarrollar materiales biopoliméricos e ingredientes destinados a la industria alimentaria. Así pues, en la primera parte de la tesis, se llevó a cabo la valorización de la biomasa de diversas especies de algas con el objetivo de identificar compuestos de interés y evaluar su potencial para la producción de materiales biopoliméricos e ingredientes alimentarios ricos en proteínas. Entre estas especies se encontraba R. okamurae, un alga parda invasora que representa una amenaza para los ecosistemas marinos. No obstante, se demostró que esta especie posee un gran potencial como fuente sostenible de compuestos bioactivos, transformando su papel de amenaza en oportunidad. La biomasa de las algas rojas también destacó por su potencial en diversas aplicaciones, incluyendo el desarrollo de materiales rentables y respetuosos con el medio ambiente obtenidos mediante de un procesado mínimo. En este contexto, la composición y la estructura de las paredes celulares de las algas desempeñaron un papel fundamental para entender cómo se comporta cada especie durante el procesado y en las propiedades de las películas resultantes. Además de la producción de materiales, también se estudiaron las algas rojas como fuente de proteínas para el consumo humano. Aunque las algas nativas presentaron una baja digestibilidad, esta mejoró mediante su procesado. No obstante, a pesar de esta mejora en la digestibilidad, el procesado podía inducir la degradación de los aminoácidos más lábiles, lo que repercutía negativamente en la calidad nutricional de las proteínas. En la segunda parte de esta tesis, se exploraron varias especies de algas rojas para extraer agar de forma más eficiente mediante métodos simplificados, y se evaluó la idoneidad de los extractos obtenidos para desarrollar materiales biopoliméricos e hidrogeles para aplicaciones alimentarias. El grado de purificación del agar tuvo un impacto significativo en las propiedades finales tanto de las películas como de los hidrogeles. En el caso de las películas, las fabricadas con agar puro presentaron propiedades superiores; sin embargo, sufrieron cambios significativos en su estructura semicristalina durante el almacenamiento. Por el contrario, las películas derivadas de extractos de agar menos purificados mostraron una mayor estabilidad en el tiempo, sugiriendo su potencial como aditivo para reducir costes y mejorar la estabilidad de las películas de agar puro. En el caso de los hidrogeles, la purificación del agar condujo a la formación de hidrogeles con una resistencia y dureza más altas. Por otro lado, el protocolo de extracción simplificado produjo fracciones de agar menos purificadas que contenían compuestos adicionales como proteínas o polifenoles. Aunque esto dio lugar a hidrogeles menos rígidos y resistentes, podrían ser de interés para la producción de hidrogeles con propiedades bioactivas. En la tercera y última parte de la tesis, se abordó la valorización de los residuos industriales generados tras la extracción de alginato, con el propósito de obtener fracciones de celulosa mediante métodos simplificados para su aplicación en la producción de materiales biopoliméricos. En este contexto, se observó que los residuos de A. esculenta y S. latissima resultaron adecuados para la extracción de fracciones celulósicas, mientras que A. nodosum podría ser más interesante para la producción de extractos ricos en fucoidano. Las fracciones de celulosa con mayor pureza generaron películas con propiedades mecánicas y aspecto visual más deseables. En cambio, las fracciones menos purificadas presentaron una mayor barrera al vapor de agua. De acuerdo con los resultados, se determinó que la simple aplicación de un tratamiento alcalino puede producir fracciones de celulosa que dan lugar a películas con un equilibrio óptimo entre propiedades funcionales y eficiencia económica y medioambiental., [CA] Aquesta tesi doctoral es va centrar en la valorització de diferents fonts de biomassa marina para desenvolupar materials biopolimèrics i ingredients destinats a la indústria alimentària. Així doncs, en la primera part de la tesi, es va dur a terme la valorització de la biomassa de diverses espècies d'algues amb l'objectiu d'identificar compostos d'interés i avaluar el seu potencial per a la producció de materials biopolimèrics i ingredients alimentaris rics en proteïnes. Entre aquestes espècies es trobava R. okamurae, una alga marró invasora que representa una amenaça per als ecosistemes marins. No obstant això, es va demostrar que aquesta espècie posseeix un gran potencial com a font sostenible de compostos bioactius, transformant el seu paper d'amenaça en oportunitat. La biomassa de les algues roges també va destacar pel seu potencial en diverses aplicacions, incloent-hi el desenvolupament de materials rendibles i respectuosos amb el medi ambient obtinguts mitjançant d'un processament mínim. En aquest context, la composició i l'estructura de les parets cel·lulars de les algues van exercir un paper fonamental per a entendre el comportament cada espècie durant el processament i en les propietats de les pel·lícules resultants. A més, també es van estudiar les algues roges com a font de proteïnes per al consum humà. Encara que les algues natives van presentar una baixa digestibilitat, aquesta va millorar mitjançant el seu processament. No obstant això, malgrat aquesta millora en la digestibilitat, el processament podia induir la degradació dels aminoàcids més làbils, la qual cosa repercutia negativament en la qualitat nutricional de les proteïnes. En la segona part d'aquesta tesi, es van explorar diverses espècies d'algues roges per a extraure agar de forma més eficient mitjançant mètodes simplificats, i es va avaluar la idoneïtat dels extractes obtinguts per a desenvolupar materials biopolimèrics i hidrogels per a aplicacions alimentàries. El grau de purificació de l'agar va tindre un impacte significatiu en les propietats finals tant de les pel·lícules com dels hidrogels. En el cas de les pel·lícules, les fabricades amb agar pur van presentar propietats superiors; no obstant això, van patir canvis significatius en la seua estructura semicristal·lina durant l'emmagatzematge. Per contra, les pel·lícules derivades d'extractes d'agar menys purificats van mostrar una major estabilitat en el temps, suggerint el seu potencial com a additiu per a reduir costos i millorar l'estabilitat de les pel·lícules d'agar pur. En el cas dels hidrogels, la purificació de l'agar va conduir a la formació d'hidrogels amb una resistència i duresa més altes. D'altra banda, el protocol d'extracció simplificat va produir fraccions d'agar menys purificades que contenien compostos addicionals com a proteïnes o polifenols. Encara que això va donar lloc a hidrogels menys rígids i resistents, podrien ser d'interés per a la producció d'hidrogels amb propietats bioactius. En la tercera i última part de la tesi, es va abordar la valorització dels residus industrials generats després de l'extracció d'alginat, amb el propòsit d'obtindre fraccions de cel·lulosa mitjançant mètodes simplificats per a la seua aplicació en la producció de materials biopolimèrics. En aquest context, es va observar que els residus de A. esculenta i S. latissima van resultar adequats per a l'extracció de fraccions cel·lulòsiques, mentre que A. nodosum podria ser més interessant per a la producció d'extractes rics en fucoidans. Les fraccions de cel·lulosa amb major puresa van generar pel·lícules amb propietats mecàniques i aspecte visual més desitjables. En canvi , les fraccions menys purificades van presentar una major barrera al vapor d'aigua. D'acord amb els resultats, es va determinar que la simple aplicació d'un tractament alcalí pot produir fraccions de cel·lulosa que donen lloc a pel·lícules amb un equilibri òptim entre propietats funcionals i eficiència econòmica i mediambiental., [EN] This doctoral thesis focused on the valorization of different sources of marine biomass with the main purpose of developing biopolymeric materials and ingredients for the food industry. Thus, in the first part of the thesis, the valorization of biomass from different algae species was carried out to identify compounds of interest and assess their potential to produce biopolymeric materials and protein-rich food ingredients. Among these species was Ruguloperyx okamurae, an invasive brown seaweed that poses a threat to marine ecosystems. However, this species was shown to have significant potential as a sustainable source of bioactive compounds, transforming its role as a threat into a valuable opportunity. Red seaweed biomass was also highlighted for its potential in a variety of applications, including the development of cost-effective and environmentally friendly materials for food applications obtained through minimal processing. In this context, the composition and structure of the algal cell walls played a crucial role in understanding how each species behaves during processing and in the properties of the resulting films. In addition to the production of biopolymeric materials, red seaweeds were also studied as a source of proteins for human consumption. Although native seaweeds had low digestibility, this was improved through processing. However, it is important to note that, despite the improvement in digestibility, processing could induce the degradation of more labile amino acids, having a negative impact on the nutritional quality of the proteins. In the second part of this thesis, several species of red seaweeds were explored to extract agar more efficiently by simplified methods, and the suitability of the extracts obtained to develop biopolymeric materials and hydrogels for food applications was evaluated. It could be observed that the degree of agar purification had a significant impact on the final properties of both films and hydrogels. In the case of films, those made of pure agar exhibited superior properties; however, they underwent significant changes in their semicrystalline structure during storage. In contrast, those films derived from less purified agar extracts showed greater stability over time, suggesting the potential of less purified agars as additives to reduce costs and improve the stability of pure agar films. Regarding the hydrogels, agar purification led to the formation of hydrogels with significantly higher strength and hardness. On the other hand, the simplified extraction protocol produced less purified agar fractions containing other compounds such as proteins, polyphenols, and minerals. Although this resulted in less rigid and resistant hydrogels, this feature could be advantageous for the production of hydrogels with bioactive properties. In the third and last part of the thesis, the valorization of industrial wastes generated after alginate extraction was addressed, with the purpose of obtaining cellulosic fractions by simplified methods for their application in the production of biopolymeric materials. In this context, it was observed that the residues of Alaria esculenta and Saccharina latissima were suitable for the extraction of cellulosic fractions, while Ascophyllum nodosum might be more interesting for the production of fucoidan-rich extracts. Cellulosic fractions with higher purity produced films with more desirable mechanical properties and visual appearance. Conversely, less purified fractions presented a greater barrier to water vapor. According to the results, it was determined that the simple application of an alkaline treatment could produce cellulosic fractions that resulted in films with an optimal balance between functional properties and economic and environmental efficiency in biopolymeric material production., This work was financially supported by the “Agencia Estatal de Investigación” (PCI2018-092886 Grant) and co-funded by the European Union’s Horizon 2020 research and innovation programme (ERA-Net SUSFOOD2) and by the grant TED2021-129711B-I00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR. This work was done within the framework of a collaboration with HISPANAGAR S.L (Burgos, Spain). The research was funded by the Spanish Ministry of Science, Innovation and Universities through projects PID2020-114821RB-I00, PID2020-117744RJ-I00, as well as CEX2021-001189-S, funded by MCIN/AEI/10.13039/501100011033. The authors also acknowledge funding through project CIRCALGAE (Horizon Europe) under grant agreement 101060607. In all projects, funding from “ERDF A way of making Europe”, the “European Union” or the “European Union NextGenerationEU/PRTR” is also acknowledged.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

In-Depth Characterization of Bioactive Extracts from Posidonia oceanica Waste Biomass

  • Benito-González, Isaac
  • López-Rubio, Amparo
  • Martinez-Abad, Antonio
  • Ballester, Ana-Rosa
  • Falcó, Irene
  • González-Candelas, Luis
  • Sánchez, Gloria
  • Lozano-Sánchez, Jesús
  • Borrás-Linares, Isabel
  • Segura-Carretero, Antonio
  • Martínez-Sanz, Marta
Posidonia oceanica waste biomass has been valorised to produce extracts by means of different methodologies and their bioactive properties have been evaluated. Water-based extracts were produced using ultrasound-assisted and hot water methods and classified according to their ethanol-affinity (E1: ethanol soluble; E2: non-soluble). Moreover, a conventional protocol with organic solvents was applied, yielding E3 extracts. Compositional and structural characterization confirmed that while E1 and E3 extracts were mainly composed of minerals and lipids, respectively, E2 extracts were a mixture of minerals, proteins and carbohydrates. All the extracts showed remarkably high antioxidant capacity, which was not only related to phenolic compounds but also to the presence of proteins and polysaccharides. All E2 and E3 extracts inhibited the growth of several foodborne fungi, while only E3 extracts decreased substantially the infectivity of feline calicivirus and murine norovirus. These results show the potential of P. oceanica waste biomass for the production of bioactive extracts.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Production of unpurified agar-based extracts from red seaweed Gelidium sesquipedale by means of simplified extraction protocols

  • Martínez-Sanz, Marta
  • Gómez-Mascaraque, Laura G.
  • Ballester, Ana Rosa
  • Martínez-Abad, Antonio
  • Brodkorb, Andre
  • López-Rubio, Amparo
This work reports on the production and characterization of agar-based extracts from the seaweed Gelidium sesquipedale by means of simple protocols based on hot water and sonication treatments. The combination of sonication with the hot water treatment reduced 4-fold the extraction time without significantly affecting the extraction yield (ca. 10–12%) and the extracts' properties. Apart from agar, the extracts contained proteins, polyphenols and minerals, which conferred them high antioxidant capacity and led to the production of brownish softer gels. The application of an alkali pre-treatment yielded almost pure agars, with higher molecular weights and crystallinities than commercial agar, resulting in stiffer gels. However, the partial digestion of agar by the alkali led to low extraction yields (ca. 2–3%). These results show the efficiency of the combined heat and sonication method to generate cost-effective agar-based extracts with potential applications within the food industry.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

High-performance starch biocomposites with celullose from waste biomass: Film properties and retrogradation behaviour

  • Benito González, Isaac
  • López-Rubio, Amparo
  • Martínez Sanz, Marta
In this work, the effects of relative humidity (RH) pre-conditioning (53% vs. 85% RH) and incorporation of cellulose fillers (from Posidonia waste biomass) on the properties and retrogradation of melt compounded starch biocomposites were investigated. Pre-conditioning at 85% RH promoted starch gelatinization during processing, leading to more amorphous materials with reduced stiffness but better barrier properties. Furthermore, these films were less stable upon storage due to greater starch retrogradation. Cellulose incorporation improved significantly the mechanical and water barrier performance, especially in the films pre-conditioned at 85% RH due to enhanced filler dispersion. Although incomplete gelatinization of the starch pre-conditioned at 53% RH led to films with bigger cellulose aggregates, their mechanical and water barrier properties were better, outperforming starch-cellulose biocomposites typically reported in the literature. Moreover, the presence of cellulose limited the degree of starch retrogradation upon storage, highlighting the potential of Posidonia biomass as a cheap source of high-performance fillers., This work was financially supported by the project GV/2018//149, the “Agencia Estatal de Investigación” and co-funded by the European Union’s Horizon 2020 research and innovation programme (ERA-Net SUSFOOD2). Marta Martinez-Sanz is recipient of a Juan de la Cierva (IJCI-2015-23389) contract from the Spanish Ministry of Economy, Industry and Competitiveness., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Development of food packaging bioactive aerogels through the valorization of Gelidium sesquipedale seaweed

  • de Oliveira, Jean Paulo
  • Pinheiro Bruni, Graziella
  • Fabra, María José
  • da Rosa Zavareze, Elessandra
  • López-Rubio, Amparo
  • Martínez Sanz, Marta
This study presents the valorization of the Gelidium sesquipedale seaweed for the development of bioactive aerogels with interest in food packaging applications. The raw seaweed was used to extract cellulose, highly crystalline (Xc∼70%) and high aspect ratio (∼40) nanocellulose and an agar-based extract, rich in polyphenols and with antioxidant capacity. Subsequently, pure PVA and hybrid aerogels containing cellulose and nanocellulose were produced by a physical cross-linking method. The presence of hydroxyl groups provided by the high aspect ratio of nanocellulose promoted the interactions with water and facilitated the accessibility of moisture towards the interior of the aerogels, hence generating high water sorption capacity materials. The agar-based extract was then incorporated into selected formulations and the release in hydrophobic and hydrophilic food simulant media was investigated. Pure PVA aerogels dissolved in aqueous media, resulting in an immediate release of the bioactive. Interestingly, the hybrid aerogels containing cellulose and nanocellulose preserved their integrity and provided a more gradual release. Although the hybrid aerogels presented similar release profiles during the first 48 h, the presence of nanocellulose led to greater release values after more prolonged times. This shows the promising properties of hybrid PVA/cellulose/nanocellulose aerogels as matrices for the controlled release of bioactive compounds in food systems, which could be of interest for the development of bioactive packaging structures., This work was financially supported by the “Agencia Estatal de Investigación” and co-funded by the European Union’s Horizon 2020 research and innovation programme (ERA-Net SUSFOOD2). Marta Martinez-Sanz is recipient of a Juan de la Cierva (IJCI-2015-23389) contract from the Spanish Ministry of Economy, Industry and Competitiveness. Jean Paulo de Oliveira and Graziella Pinheiro Bruni were funded by CAPES (88887.124727/2014–00) doctoral scholarship., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Cellulose nanocrystal-based films produced by more sustainable extraction protocols from Posidonia oceanica waste biomass

  • Benito González, Isaac
  • López-Rubio, Amparo
  • Gavara, Rafael
  • Martínez Sanz, Marta
Simplified extraction procedures (avoiding Soxhlet treatment and/or hemicellulose removal) were evaluated to valorize waste biomass from Posidonia oceanica leaves, obtaining cellulosic fractions and nanocrystals, which were subsequently used to produce films from their aqueous suspensions. Cellulose purification significantly improved mechanical and barrier properties of the films obtained from the fractions, while the extracted nanocrystals yielded films with remarkably improved properties, outperforming most benchmark biopolymers. The lipids initially present in the fractions without Soxhlet treatment were not completely digested by the hydrolysis treatment, having a positive impact on the water vapor permeability of the films (up to 63% drop), although negatively impacting oxygen permeability (increased by 20–30-fold). On the contrary, some hemicelluloses present in the less purified fractions, strongly interacting with cellulose, remained in the extracted nanocrystals leading to enhanced mechanical properties (45% higher tensile strength and 2-fold increase in the elongation at break), but lower water barrier (up to 70% higher permeability than the pure cellulose nanocrystals) due to their hydrophilic character. Films produced from the less purified nanocrystals showed the best compromise between mechanical and barrier performance, while offering a great advantage in terms of sustainability and reduced costs., This work was financially supported by the project GV/2018//149, the “Agencia Estatal de Investigación” and co-funded by the European Union’s Horizon 2020 research and innovation programme (ERA-Net SUSFOOD2). Marta Martínez-Sanz is recipient of a Juan de la Cierva (IJCI-2015-23389) contract from the Spanish Ministry of Economy, Industry and Competitiveness., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Advanced structural characterisation of agar-based hydrogels: Rheological and small angle scattering studies

  • Martínez Sanz, Marta
  • Ström, Anna
  • López Sánchez, Patricia
  • Knutsen, Svein Halvor
  • Ballance, Simon
  • Zobel, Hanne Kristine
  • Sokolova, Anna
  • Gilbert, Elliot Paul
  • López-Rubio, Amparo
Agar-based extracts from Gelidium sesquipedale were generated by heat and combined heat-sonication, with and without the application of alkali pre-treatment. Pre-treatment yielded extracts with greater agar contents; however, it produced partial degradation of the agar, reducing its molecular weight. Sonication produced extracts with lower agar contents and decreased molecular weights. A gelation mechanism is proposed based on the rheological and small angle scattering characterization of the extracts. The formation of strong hydrogels upon cooling was caused by the association of agarose chains into double helices and bundles, the sizes of which depended on the agar purity and molecular weight. These different arrangements at the molecular scale consequently affected the mechanical performance of the obtained hydrogels. Heating of the hydrogels produced a gradual disruption of the bundles; weaker or smaller bundles were formed upon subsequent cooling, suggesting that the process was not completely reversible., Synchrotron experiments were performed at NCD beamline at ALBA Synchrotron with the collaboration of ALBA staff (2018022638 project). This work was financially supported by the “Agencia Estatal de Investigación” (PCI2018-092886 Grant) and co-funded by the European Union’s Horizon 2020 research and innovation programme (ERA-Net SUSFOOD2). Part of this work was supported by the COST Action ES1408 European network for algal-bioproducts (EUALGAE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

PLA coating improves the performance of renewable adsorbent pads based on cellulosic aerogels from aquatic waste biomass

  • Benito González, Isaac
  • López-Rubio, Amparo
  • Gómez-Mascaraque, Laura G.
  • Martínez Sanz, Marta
Lightweight, hydrophobic, adsorbent pads based on aerogels from different cellulosic and nanocellulosic fractions extracted from Posidonia oceanica waste biomass were developed by a simple freeze-drying and PLA dipping method. The pure (nano)cellulosic aerogels presented highly porous structures, capable of adsorbing large amounts of oil (up to ∼34 g oil/g aerogel); however, they lost their integrity when soaked in water. The incorporation of PLA hydrophobized the aerogels and improved significantly their mechanical performance (up to 10-fold increase in the compression stress). The most porous aerogel structures, obtained with the lowest (nano)cellulosic concentrations and with the less purified fractions, incorporated greater amounts of PLA upon dipping, which was mostly distributed filling in the pores. All the PLA-coated (nano)cellulosic aerogels presented a hydrophobic behavior, with contact angles of 95-130° and selectively adsorbing greater amounts of oil (5.9-9.2 g oil/g aerogel) than water (2.8-6.7 g H2O/g aerogel). These materials present a great potential as adsorbent pads for oil spill cleaning and food packaging applications., This work was financially supported by the project RTI2018-094408-J-I00 from the Spanish Ministry of Science, Innovation and Universities, the “Agencia Estatal de Investigación” and co-funded by the European Union’s Horizon 2020 research and innovation programme (ERA-Net SUSFOOD2). Isaac Benito-Gonzalez was recipient of an Erasmus Plus grant (European programme) from the Polytechnic University of Valencia (UPV) in order to carry out part of the experimental work at Teagasc (Fermoy, Ireland)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of biopolymer matrices on lactose hydrolysis by enzymatically active hydrogel and aerogels loaded with β-galactosidase nanoflowers

  • Fabra, María José
  • Talens Perales, David
  • Román Sarmiento, Adrián
  • López-Rubio, Amparo
  • Polaina Molina, Julio
In this work, enzymatically active polysaccharide-based hydrogels and aerogels have been developed. To this end, a thermostable β-galactosidase (TmLac) enzyme from Thermotoga maritima embedded in nanoflowers’ format was used to evaluate the capacity of the hydrogel matrices to preserve the hydrolytic activity of the enzyme and the reusability of the hydrogels formed. Commercial agar, unpurified agar and agarose were compared as supporting materials. Although the developed hydrogel capsules can be used at high temperature (75 °C) and reused for the digestion of lactose to a greater extent than the free nanoflowers, loaded hydrogel capsules behaved differently depending on the type of polysaccharide used. Commercial agar was the most promising one since these hydrogel capsules could be reused, maintaining the structural integrity and reaching higher enzymatic activity (after seven cycles at 75 °C) than the free TmLac-Ca2+ nanoflowers. To facilitate handling and storage, aerogels were developed by freeze-drying the hydrogel capsules. Aerogels of agarose and unpurified agar underwent structural changes during freeze-drying that adversely affected their subsequent use, losing their integrity after being rehydrated. However, commercial agar aerogels were successfully developed and reused thanks to the existing interactions with TmLac-Ca2+ nanoflowers (confirmed by FTIR), which resulted in better capsule integrity and enzyme protection. The hydrolytic activity of enzymatically active aerogels based on commercial agar was in the same range of the free TmLac and TmLac-Ca2+ nanoflowers, being significantly higher to their counterparts in the hydrated form (hydrogels based on commercial agar)., This research was supported by grants from Spain's ‘Secretaría de Estado de Investigación, Desarrollo e Innovación' (AGL2016-75245-R), Agencia Estatal de Investigación (AEI, Grant PCI2018-092886) and cofunded by the European Union's Horizon 2020 research and innovation programme (ERA-Net SUSFOOD2). MJF was supported by a Ramon y Cajal contract (RYC2014-15842) from the Spanish Ministerio de Economia; Industria y Competitividad., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Valorisation of vine shoots for the development of cellulose-based biocomposite films with improved performance and bioactivity

  • Benito González, Isaac
  • Jaén Cano, C.M.
  • López-Rubio, Amparo
  • Martínez-Abad, Antonio
  • Martínez Sanz, Marta
This work reports on the valorization of Tempranillo vine shoots for the development of bio-based packaging materials. Cellulose (F3) and nanocellulose (NANO F3) were produced by the conventional method, while less purified cellulosic fractions (F2A) and nanocrystals (NANO F2A) were extracted by simplified protocols (omitting Soxhlet and alkaline treatments) to reduce production costs and environmental impact and evaluate the potential added functionalities of these less purified materials. Although most of the hemicelluloses in F2A were digested upon acid hydrolysis, a small fraction remained in NANO F2A. On the other hand, the presence of a minor xylan fraction in F3 limited the access of sulphuric acid towards the cellulose microfibrils, hindering hydrolysis and producing heterogeneous fibrillar structures in NANO F3. The obtained materials were used to produce cellulosic films, as well as blends with agar, and their performance properties were evaluated. Overall, NANO F2A films showed the best compromise between performance and sustainability and presented additional antioxidant capacity. The properties of the films could be adjusted by the incorporation of agar, improving their ductility and water permeability., This work was financially supported by the project RTI2018-094408-J-I00 from the Spanish Ministry of Science, Innovation and Universities, the “Agencia Estatal de Investigación” and co-funded by the European Union's Horizon 2020 research and innovation programme (ERA-Net SUSFOOD2). A. Martinez-Abad acknowledges the Spanish Ministry of Science, Innovation and University, as a recipient of a Juan de la Cierva contract (IJDC-2017-31255)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Sustainable starch biocomposite films fully-based on white rice (Oryza sativa) agroindustrial by-products

  • Benito González, Isaac
  • Ortiz-Gimeno, María del Mar
  • López-Rubio, Amparo
  • Martínez-Abad, Antonio
  • Garrido Fernández, A.
  • Martínez Sanz, Marta
In this work, starch biocomposites fully-based on the valorization of white rice agroindustrial by-products have been produced by melt mixing. The film matrix consisted on rice flour (RF) or rice starch (RS) obtained, which was reinforced with cellulose-rich nanocrystals obtained through simplified extraction processes from rice husks (CN-RH) and rice straw (CN-RW). The presence of impurities in RF induced the re-crystallization of starch, producing more crystalline films with better mechanical performance, but greater water vapor permeability than RS. This was overcome by the addition of 15% (w/w) cellulosic nanocrystals. Moreover, the cellulosic nanocrystals increased the stiffness of the films, with the CN-RW yielding better mechanical performance due to their more homogeneous morphology and distribution within the RF matrix. Interestingly, all the RF films showed remarkable antioxidant capacity (>20% inhibition of β-carotene bleaching), highlighting the potential of less purified materials to develop sustainable food packaging with additional functionalities., M. M. Ortiz-Gimeno was recipient of a JAE-Intro grant from CSIC (JAEINT20_EX_0182) and A. Martínez-Abad is recipient of a Juan de la Cierva Incorporación contract (IJDC-2017-31255) from the Spanish Ministry of Economy, Industry and Competitiveness. This work was also financially supported by the RTI2018-094408-J-I00 project (MCIU/AEI/FEDER,UE) and the BIOCARB-4-FOOD project granted by the “Agencia Estatal de Investigación” and co-funded by the European Union’s Horizon 2020 research and innovation programme (ERA-Net SUSFOOD2)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Tesis doctoral (DoctoralThesis)

Valorization of marine biomass for the development of biopolymeric materials and additives with functional properties, Valorización de biomasa marina para el desarrollo de materiales biopoliméricos y aditivos con propiedades funcionales

  • Cebrián Lloret, Vera
[EN] This doctoral thesis focused on the valorization of different sources of marine biomass with the main purpose of developing biopolymeric materials and ingredients for the food industry. Thus, in the first part of the thesis, the valorization of biomass from different algae species was carried out to identify compounds of interest and assess their potential to produce biopolymeric materials and protein-rich food ingredients. Among these species was Ruguloperyx okamurae, an invasive brown seaweed that poses a threat to marine ecosystems. However, this species was shown to have significant potential as a sustainable source of bioactive compounds, transforming its role as a threat into a valuable opportunity. Red seaweed biomass was also highlighted for its potential in a variety of applications, including the development of cost-effective and environmentally friendly materials for food applications obtained through minimal processing. In this context, the composition and structure of the algal cell walls played a crucial role in understanding how each species behaves during processing and in the properties of the resulting films. In addition to the production of biopolymeric materials, red seaweeds were also studied as a source of proteins for human consumption. Although native seaweeds had low digestibility, this was improved through processing. However, it is important to note that, despite the improvement in digestibility, processing could induce the degradation of more labile amino acids, having a negative impact on the nutritional quality of the proteins. In the second part of this thesis, several species of red seaweeds were explored to extract agar more efficiently by simplified methods, and the suitability of the extracts obtained to develop biopolymeric materials and hydrogels for food applications was evaluated. It could be observed that the degree of agar purification had a significant impact on the final properties of both films and hydrogels. In the case of films, those made of pure agar exhibited superior properties; however, they underwent significant changes in their semicrystalline structure during storage. In contrast, those films derived from less purified agar extracts showed greater stability over time, suggesting the potential of less purified agars as additives to reduce costs and improve the stability of pure agar films. Regarding the hydrogels, agar purification led to the formation of hydrogels with significantly higher strength and hardness. On the other hand, the simplified extraction protocol produced less purified agar fractions containing other compounds such as proteins, polyphenols, and minerals. Although this resulted in less rigid and resistant hydrogels, this feature could be advantageous for the production of hydrogels with bioactive properties. In the third and last part of the thesis, the valorization of industrial wastes generated after alginate extraction was addressed, with the purpose of obtaining cellulosic fractions by simplified methods for their application in the production of biopolymeric materials. In this context, it was observed that the residues of Alaria esculenta and Saccharina latissima were suitable for the extraction of cellulosic fractions, while Ascophyllum nodosum might be more interesting for the production of fucoidan-rich extracts. Cellulosic fractions with higher purity produced films with more desirable mechanical properties and visual appearance. Conversely, less purified fractions presented a greater barrier to water vapor. According to the results, it was determined that the simple application of an alkaline treatment could produce cellulosic fractions that resulted in films with an optimal balance between functional properties and economic and environmental efficiency in biopolymeric material production., [ES] Esta tesis doctoral se centró en la valorización de diferentes fuentes de biomasa marina con el propósito principal de desarrollar materiales biopoliméricos e ingredientes destinados a la industria alimentaria. Así pues, en la primera parte de la tesis, se llevó a cabo la valorización de la biomasa de diversas especies de algas con el objetivo de identificar compuestos de interés y evaluar su potencial para la producción de materiales biopoliméricos e ingredientes alimentarios ricos en proteínas. Entre estas especies se encontraba Ruguloperyx okamurae, un alga parda invasora que representa una amenaza para los ecosistemas marinos. No obstante, se demostró que esta especie posee un potencial significativo como fuente sostenible de compuestos bioactivos, transformando su papel de amenaza en una valiosa oportunidad. La biomasa de las algas rojas también destacó por su potencial en diversas aplicaciones, incluyendo el desarrollo de materiales rentables y respetuosos con el medio ambiente para aplicaciones alimentarias obtenidos mediante de un procesado mínimo. En este contexto, la composición y la estructura de las paredes celulares de las algas desempeñaron un papel fundamental para entender cómo se comporta cada especie durante el procesado y en las propiedades de las películas resultantes. Además de la producción de materiales biopoliméricos, también se estudiaron las algas rojas como fuente de proteínas para el consumo humano. Aunque las algas nativas presentaron una baja digestibilidad, esta mejoró mediante su procesado. No obstante, es importante destacar que, a pesar de esta mejora en la digestibilidad, esta mejoró mediante su procesado. No obstante, es importante destacar que, a pesar de esta mejora en la digestibilidad, el procesado podía inducir la degradación de los aminoácidos más lábiles, lo que repercutía negativamente en la calidad nutricional de las proteínas. En la segunda parte de esta tesis, se exploraron varias especies de algas rojas para extraer agar de forma más eficiente mediante métodos simplificados, y se evaluó la idoneidad de los extractos obtenidos para desarrollar materiales biopoliméricos e hidrogeles para aplicaciones alimentarias. Se pudo observar que el grado de purificación del agar tuvo un impacto significativo en las propiedades finales tanto de las películas como de los hidrogeles. En el caso de las películas, las fabricadas con agar puro presentaron propiedades superiores; sin embargo, sufrieron cambios significativos en su estructura semicristalina durante el almacenamiento. Por el contrario, las películas derivadas de extractos de agar menos purificados mostraron una mayor estabilidad a lo largo del tiempo, sugiriendo su potencial como aditivo para reducir costes y mejorar la estabilidad de las películas de agar puro. En el caso de los hidrogeles, la purificación del agar condujo a la formación de hidrogeles con una resistencia y dureza significativamente altas. Por otro lado, el protocolo de extracción simplificado produjo fracciones de agar menos purificadas que contenían compuestos adicionales como proteínas, polifenoles y minerales. Aunque esto dio lugar a hidrogeles menos rígidos y resistentes, esta característica podría ser beneficiosa para la producción de hidrogeles con propiedades bioactivas. En la tercera y última parte de la tesis, se abordó la valorización de los residuos industriales generados tras la extracción de alginato, con el propósito de obtener fracciones de celulosa mediante métodos simplificados para su aplicación en la producción de materiales biopoliméricos. En este contexto, se observó que los residuos de Alaria esculenta y Saccharina latissima resultaron adecuados para la extracción de fracciones celulósicas, mientras que Ascophyllum nodosum podría ser más interesante para la producción de extractos ricos en fucoidano. Las fracciones de celulosa con mayor pureza generaron películas con propiedades mecánicas y aspecto visual más deseables. En cambio, las fracciones menos purificadas presentaron una mayor barrera al vapor de agua. De acuerdo con los resultados, se determinó que la simple aplicación de un tratamiento alcalino puede producir fracciones de celulosa que dan lugar a películas con un equilibrio óptimo entre propiedades funcionales y eficiencia económica y medioambiental., [CAT] Aquesta tesi doctoral es va centrar en la valorització de diferents fonts de biomassa marina amb el propòsit principal de desenvolupar materials biopolimèrics i ingredients destinats a la indústria alimentària. Així doncs, en la primera part de la tesi, es va dur a terme la valorització de la biomassa de diverses espècies d'algues amb l'objectiu d'identificar compostos d'interés i avaluar el seu potencial per a la producció de materials biopolimèrics i ingredients alimentaris rics en proteïnes. Entre aquestes espècies es trobava Ruguloperyx okamurae, una alga marró invasora que representa una amenaça per als ecosistemes marins. No obstant això, es va demostrar que aquesta espècie posseeix un potencial significatiu com a font sostenible de compostos bioactius, transformant el seu paper d'amenaça en una valuosa oportunitat. La biomassa de les algues roges també va destacar pel seu potencial en diverses aplicacions, incloent-hi el desenvolupament de materials rendibles i respectuosos amb el medi ambient per a aplicacions alimentàries obtinguts mitjançant d'un processament mínim. En aquest context, la composició i l'estructura de les parets cel·lulars de les algues van exercir un paper fonamental per a entendre com es comporta cada espècie durant el processament i en les propietats de les pel·lícules resultants. A més de la producció de materials biopolimèrics, les algues roges també es van estudiar com a font de proteïnes per al consum humà. Encara que les algues natives van presentar una baixa digestibilitat, aquesta va millorar mitjançant el seu processament. No obstant això, és important destacar que, malgrat aquesta millora en la digestibilitat, el processament podia induir la degradació dels aminoàcids més làbils, la qual cosa repercutia negativament en la qualitat nutricional de les proteïnes. En la segona part d'aquesta tesi, es van explorar diverses espècies d'algues roges per a extraure agar de manera eficient mitjançant mètodes simplificats i es va avaluar la idoneïtat dels extractes obtinguts per a desenvolupar materials biopolimèrics i hidrogels per a aplicacions alimentàries. Es va poder observar que el grau de purificació de l'agar va tindre un impacte significatiu en les propietats finals tant de les pel·lícules com dels hidrogels. En el cas de les pel·lícules, les fabricades amb agar pur van presentar propietats superiors; no obstant això, van patir canvis significatius en la seua estructura semicristal·lina durant l'emmagatzematge. No obstant això, les pel·lícules derivades d'extractes d'agar menys purificats van mostrar una major estabilitat al llarg del temps, suggerint el seu potencial com a additiu per a reduir costos i millorar l'estabilitat de les pel·lícules d'agar pur. En el cas dels hidrogels, la purificació de l'agar va conduir a la formació d'hidrogels amb una resistència i duresa significativament altes. D'altra banda, el protocol d'extracció simplificat va produir fraccions d'agar menys purificades que contenien compostos addicionals com a proteïnes, polifenols i minerals. Encara que això va donar lloc a hidrogels menys rígids i resistents, aquesta característica podria ser beneficiosa per a la producció d'hidrogels amb propietats bioactives. En la tercera i última part de la tesi, es va abordar la valorització dels residus industrials generats després de l'extracció d'alginat, amb el propòsit d'obtindre fraccions de cel·lulosa mitjançant mètodes simplificats per a la seua aplicació en la producció de materials biopolimèrics. En aquest context, es va observar que els residus de Alaria esculenta i Saccharina latissima van resultar adequats per a l'extracció de fraccions cel·lulòsiques, mentre que Ascophyllum nodosum podria ser més interessant per a la producció d'extractes rics en fucoidans. Les fraccions de cel·lulosa amb major puresa van generar pel·lícules amb propietats mecàniques i aspecte visual més desitjables. En canvi, les fraccions menys purificades van presentar una major barrera al vapor d'aigua. D'acord amb els resultats, es va determinar que la simple aplicació d'un tractament alcalí pot produir fraccions de cel·lulosa que donen lloc a pel·lícules amb un equilibri òptim entre propietats funcionals i eficiència econòmica i mediambiental., This work was financially supported by the “Agencia Estatal de Investigación” (PCI2018-092886 Grant) and co-funded by the European Union’s Horizon 2020 research and innovation programme (ERA-Net SUSFOOD2) and by the grant TED2021-129711B-I00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR. This work was done within the framework of a collaboration with HISPANAGAR S.L (Burgos, Spain). The research was funded by the Spanish Ministry of Science, Innovation and Universities through projects PID2020-114821RB-I00, PID2020-117744RJ-I00, as well as CEX2021-001189-S, funded by MCIN/AEI/10.13039/501100011033. The authors also acknowledge funding through project CIRCALGAE (Horizon Europe) under grant agreement 101060607. In all projects, funding from “ERDF A way of making Europe”, the “European Union” or the “European Union NextGenerationEU/PRTR” is also acknowledged., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001189-S)., Peer reviewed