Skip to main content

EXTRACCION Y CARACTERIZACION DE CARBOHIDRATOS Y BIOACTIVOS DE ALGAS Y PLANTAS MARINAS PARA APLICACIONES ALIMENTARIAS

PCI2018-092886

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos Programación Conjunta Internacional
Call year 2018
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Valorization of alginate-extracted seaweed biomass for the development of cellulose-based packaging films

  • Cebrián-Lloret, Vera
  • Mandy Metz
  • Martínez-Abad, Antonio
  • Svein Halvor Knutsen
  • Simon Ballance
  • López-Rubio, Amparo
  • Martínez-Sanz, Marta
[EN] Seaweed residues from Alaria esculenta, Saccharina latissima and Ascophyllum nodosum after alginate extraction have been valorized to produce cellulose-based fractions with different purification degrees. The residues were mainly composed of carbohydrates (35-57%) and proteins (12-37%), Alaria and Saccharina being richer in cellulose and Ascophyllum richer in fucoidan. The lower cellulose content in the latter made it unsuitable for the extraction of cellulosic fractions. Self-supporting films were obtained from the cellulosic fractions from Saccharina and Alaria residues. While the higher cellulose purity films presented more desirable characteristics in terms of mechanical properties (with elastic moduli of ca. 5-7 GPa and elongation values of ca. 3-5%) and visual appearance, the presence of noncellulosic components in the films from less purified fractions reduced their water sensitivity and promoted greater water barrier (with water permeability values of ca. 4-6 kg.m/s.m2.Pa). These results point towards the potential of a simple alkaline extraction to generate cellulose-based films from seaweed residuals with the best compromise between functional properties and economical and environmental efficiency., This work was financially supported by the "Agencia Estatal de Investigacion" (PCI2018-092886 Grant) and co-funded by the European Union's Horizon 2020 research and innovation programme (ERA-Net SUSFOOD2) and the RTI2018-094408-J-I00 project (MCIU/AEI/FEDER,UE).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis doctoral (DoctoralThesis)

Valorization of Marine Biomass for the Development of Biopolymeric Materials and Additives with Functional Properties, Valorización de biomasa marina para el desarrollo de materiales biopoliméricos y aditivos con propiedades funcionales

  • Cebrián Lloret, Vera
[ES] Esta tesis doctoral se centró en la valorización de diferentes fuentes de biomasa marina para desarrollar materiales biopoliméricos e ingredientes destinados a la industria alimentaria. Así pues, en la primera parte de la tesis, se llevó a cabo la valorización de la biomasa de diversas especies de algas con el objetivo de identificar compuestos de interés y evaluar su potencial para la producción de materiales biopoliméricos e ingredientes alimentarios ricos en proteínas. Entre estas especies se encontraba R. okamurae, un alga parda invasora que representa una amenaza para los ecosistemas marinos. No obstante, se demostró que esta especie posee un gran potencial como fuente sostenible de compuestos bioactivos, transformando su papel de amenaza en oportunidad. La biomasa de las algas rojas también destacó por su potencial en diversas aplicaciones, incluyendo el desarrollo de materiales rentables y respetuosos con el medio ambiente obtenidos mediante de un procesado mínimo. En este contexto, la composición y la estructura de las paredes celulares de las algas desempeñaron un papel fundamental para entender cómo se comporta cada especie durante el procesado y en las propiedades de las películas resultantes. Además de la producción de materiales, también se estudiaron las algas rojas como fuente de proteínas para el consumo humano. Aunque las algas nativas presentaron una baja digestibilidad, esta mejoró mediante su procesado. No obstante, a pesar de esta mejora en la digestibilidad, el procesado podía inducir la degradación de los aminoácidos más lábiles, lo que repercutía negativamente en la calidad nutricional de las proteínas. En la segunda parte de esta tesis, se exploraron varias especies de algas rojas para extraer agar de forma más eficiente mediante métodos simplificados, y se evaluó la idoneidad de los extractos obtenidos para desarrollar materiales biopoliméricos e hidrogeles para aplicaciones alimentarias. El grado de purificación del agar tuvo un impacto significativo en las propiedades finales tanto de las películas como de los hidrogeles. En el caso de las películas, las fabricadas con agar puro presentaron propiedades superiores; sin embargo, sufrieron cambios significativos en su estructura semicristalina durante el almacenamiento. Por el contrario, las películas derivadas de extractos de agar menos purificados mostraron una mayor estabilidad en el tiempo, sugiriendo su potencial como aditivo para reducir costes y mejorar la estabilidad de las películas de agar puro. En el caso de los hidrogeles, la purificación del agar condujo a la formación de hidrogeles con una resistencia y dureza más altas. Por otro lado, el protocolo de extracción simplificado produjo fracciones de agar menos purificadas que contenían compuestos adicionales como proteínas o polifenoles. Aunque esto dio lugar a hidrogeles menos rígidos y resistentes, podrían ser de interés para la producción de hidrogeles con propiedades bioactivas. En la tercera y última parte de la tesis, se abordó la valorización de los residuos industriales generados tras la extracción de alginato, con el propósito de obtener fracciones de celulosa mediante métodos simplificados para su aplicación en la producción de materiales biopoliméricos. En este contexto, se observó que los residuos de A. esculenta y S. latissima resultaron adecuados para la extracción de fracciones celulósicas, mientras que A. nodosum podría ser más interesante para la producción de extractos ricos en fucoidano. Las fracciones de celulosa con mayor pureza generaron películas con propiedades mecánicas y aspecto visual más deseables. En cambio, las fracciones menos purificadas presentaron una mayor barrera al vapor de agua. De acuerdo con los resultados, se determinó que la simple aplicación de un tratamiento alcalino puede producir fracciones de celulosa que dan lugar a películas con un equilibrio óptimo entre propiedades funcionales y eficiencia económica y medioambiental., [CA] Aquesta tesi doctoral es va centrar en la valorització de diferents fonts de biomassa marina para desenvolupar materials biopolimèrics i ingredients destinats a la indústria alimentària. Així doncs, en la primera part de la tesi, es va dur a terme la valorització de la biomassa de diverses espècies d'algues amb l'objectiu d'identificar compostos d'interés i avaluar el seu potencial per a la producció de materials biopolimèrics i ingredients alimentaris rics en proteïnes. Entre aquestes espècies es trobava R. okamurae, una alga marró invasora que representa una amenaça per als ecosistemes marins. No obstant això, es va demostrar que aquesta espècie posseeix un gran potencial com a font sostenible de compostos bioactius, transformant el seu paper d'amenaça en oportunitat. La biomassa de les algues roges també va destacar pel seu potencial en diverses aplicacions, incloent-hi el desenvolupament de materials rendibles i respectuosos amb el medi ambient obtinguts mitjançant d'un processament mínim. En aquest context, la composició i l'estructura de les parets cel·lulars de les algues van exercir un paper fonamental per a entendre el comportament cada espècie durant el processament i en les propietats de les pel·lícules resultants. A més, també es van estudiar les algues roges com a font de proteïnes per al consum humà. Encara que les algues natives van presentar una baixa digestibilitat, aquesta va millorar mitjançant el seu processament. No obstant això, malgrat aquesta millora en la digestibilitat, el processament podia induir la degradació dels aminoàcids més làbils, la qual cosa repercutia negativament en la qualitat nutricional de les proteïnes. En la segona part d'aquesta tesi, es van explorar diverses espècies d'algues roges per a extraure agar de forma més eficient mitjançant mètodes simplificats, i es va avaluar la idoneïtat dels extractes obtinguts per a desenvolupar materials biopolimèrics i hidrogels per a aplicacions alimentàries. El grau de purificació de l'agar va tindre un impacte significatiu en les propietats finals tant de les pel·lícules com dels hidrogels. En el cas de les pel·lícules, les fabricades amb agar pur van presentar propietats superiors; no obstant això, van patir canvis significatius en la seua estructura semicristal·lina durant l'emmagatzematge. Per contra, les pel·lícules derivades d'extractes d'agar menys purificats van mostrar una major estabilitat en el temps, suggerint el seu potencial com a additiu per a reduir costos i millorar l'estabilitat de les pel·lícules d'agar pur. En el cas dels hidrogels, la purificació de l'agar va conduir a la formació d'hidrogels amb una resistència i duresa més altes. D'altra banda, el protocol d'extracció simplificat va produir fraccions d'agar menys purificades que contenien compostos addicionals com a proteïnes o polifenols. Encara que això va donar lloc a hidrogels menys rígids i resistents, podrien ser d'interés per a la producció d'hidrogels amb propietats bioactius. En la tercera i última part de la tesi, es va abordar la valorització dels residus industrials generats després de l'extracció d'alginat, amb el propòsit d'obtindre fraccions de cel·lulosa mitjançant mètodes simplificats per a la seua aplicació en la producció de materials biopolimèrics. En aquest context, es va observar que els residus de A. esculenta i S. latissima van resultar adequats per a l'extracció de fraccions cel·lulòsiques, mentre que A. nodosum podria ser més interessant per a la producció d'extractes rics en fucoidans. Les fraccions de cel·lulosa amb major puresa van generar pel·lícules amb propietats mecàniques i aspecte visual més desitjables. En canvi , les fraccions menys purificades van presentar una major barrera al vapor d'aigua. D'acord amb els resultats, es va determinar que la simple aplicació d'un tractament alcalí pot produir fraccions de cel·lulosa que donen lloc a pel·lícules amb un equilibri òptim entre propietats funcionals i eficiència econòmica i mediambiental., [EN] This doctoral thesis focused on the valorization of different sources of marine biomass with the main purpose of developing biopolymeric materials and ingredients for the food industry. Thus, in the first part of the thesis, the valorization of biomass from different algae species was carried out to identify compounds of interest and assess their potential to produce biopolymeric materials and protein-rich food ingredients. Among these species was Ruguloperyx okamurae, an invasive brown seaweed that poses a threat to marine ecosystems. However, this species was shown to have significant potential as a sustainable source of bioactive compounds, transforming its role as a threat into a valuable opportunity. Red seaweed biomass was also highlighted for its potential in a variety of applications, including the development of cost-effective and environmentally friendly materials for food applications obtained through minimal processing. In this context, the composition and structure of the algal cell walls played a crucial role in understanding how each species behaves during processing and in the properties of the resulting films. In addition to the production of biopolymeric materials, red seaweeds were also studied as a source of proteins for human consumption. Although native seaweeds had low digestibility, this was improved through processing. However, it is important to note that, despite the improvement in digestibility, processing could induce the degradation of more labile amino acids, having a negative impact on the nutritional quality of the proteins. In the second part of this thesis, several species of red seaweeds were explored to extract agar more efficiently by simplified methods, and the suitability of the extracts obtained to develop biopolymeric materials and hydrogels for food applications was evaluated. It could be observed that the degree of agar purification had a significant impact on the final properties of both films and hydrogels. In the case of films, those made of pure agar exhibited superior properties; however, they underwent significant changes in their semicrystalline structure during storage. In contrast, those films derived from less purified agar extracts showed greater stability over time, suggesting the potential of less purified agars as additives to reduce costs and improve the stability of pure agar films. Regarding the hydrogels, agar purification led to the formation of hydrogels with significantly higher strength and hardness. On the other hand, the simplified extraction protocol produced less purified agar fractions containing other compounds such as proteins, polyphenols, and minerals. Although this resulted in less rigid and resistant hydrogels, this feature could be advantageous for the production of hydrogels with bioactive properties. In the third and last part of the thesis, the valorization of industrial wastes generated after alginate extraction was addressed, with the purpose of obtaining cellulosic fractions by simplified methods for their application in the production of biopolymeric materials. In this context, it was observed that the residues of Alaria esculenta and Saccharina latissima were suitable for the extraction of cellulosic fractions, while Ascophyllum nodosum might be more interesting for the production of fucoidan-rich extracts. Cellulosic fractions with higher purity produced films with more desirable mechanical properties and visual appearance. Conversely, less purified fractions presented a greater barrier to water vapor. According to the results, it was determined that the simple application of an alkaline treatment could produce cellulosic fractions that resulted in films with an optimal balance between functional properties and economic and environmental efficiency in biopolymeric material production., This work was financially supported by the “Agencia Estatal de Investigación” (PCI2018-092886 Grant) and co-funded by the European Union’s Horizon 2020 research and innovation programme (ERA-Net SUSFOOD2) and by the grant TED2021-129711B-I00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR. This work was done within the framework of a collaboration with HISPANAGAR S.L (Burgos, Spain). The research was funded by the Spanish Ministry of Science, Innovation and Universities through projects PID2020-114821RB-I00, PID2020-117744RJ-I00, as well as CEX2021-001189-S, funded by MCIN/AEI/10.13039/501100011033. The authors also acknowledge funding through project CIRCALGAE (Horizon Europe) under grant agreement 101060607. In all projects, funding from “ERDF A way of making Europe”, the “European Union” or the “European Union NextGenerationEU/PRTR” is also acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of biopolymer matrices on lactose hydrolysis by enzymatically active hydrogel and aerogels loaded with β-galactosidase nanoflowers

  • Fabra, María José
  • Talens Perales, David
  • Román Sarmiento, Adrián
  • López-Rubio, Amparo
  • Polaina Molina, Julio
In this work, enzymatically active polysaccharide-based hydrogels and aerogels have been developed. To this end, a thermostable β-galactosidase (TmLac) enzyme from Thermotoga maritima embedded in nanoflowers’ format was used to evaluate the capacity of the hydrogel matrices to preserve the hydrolytic activity of the enzyme and the reusability of the hydrogels formed. Commercial agar, unpurified agar and agarose were compared as supporting materials. Although the developed hydrogel capsules can be used at high temperature (75 °C) and reused for the digestion of lactose to a greater extent than the free nanoflowers, loaded hydrogel capsules behaved differently depending on the type of polysaccharide used. Commercial agar was the most promising one since these hydrogel capsules could be reused, maintaining the structural integrity and reaching higher enzymatic activity (after seven cycles at 75 °C) than the free TmLac-Ca2+ nanoflowers. To facilitate handling and storage, aerogels were developed by freeze-drying the hydrogel capsules. Aerogels of agarose and unpurified agar underwent structural changes during freeze-drying that adversely affected their subsequent use, losing their integrity after being rehydrated. However, commercial agar aerogels were successfully developed and reused thanks to the existing interactions with TmLac-Ca2+ nanoflowers (confirmed by FTIR), which resulted in better capsule integrity and enzyme protection. The hydrolytic activity of enzymatically active aerogels based on commercial agar was in the same range of the free TmLac and TmLac-Ca2+ nanoflowers, being significantly higher to their counterparts in the hydrated form (hydrogels based on commercial agar)., This research was supported by grants from Spain's ‘Secretaría de Estado de Investigación, Desarrollo e Innovación' (AGL2016-75245-R), Agencia Estatal de Investigación (AEI, Grant PCI2018-092886) and cofunded by the European Union's Horizon 2020 research and innovation programme (ERA-Net SUSFOOD2). MJF was supported by a Ramon y Cajal contract (RYC2014-15842) from the Spanish Ministerio de Economia; Industria y Competitividad., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Alternative protocols for the production of more sustainable agar-based extracts from Gelidium sesquipedale

  • Martínez Sanz, Marta
  • Gomez-Barrio, Laura Pilar
  • Zhao, Ming
  • Knutseni, Brijesh Tiwar
  • Halvor, Svein
  • Ballance, Simon
  • Zobel, Hanne Kristine
  • Ekman Nilsson, Anna
  • Krewer, Christoffer
  • Östergren, Karin
  • López-Rubio, Amparo
Agar-based extracts from Gelidium sesquipedale were obtained by applying a conventional hot water treatment and alternative ultrasound- and microwave-assisted methods, with and without the application of an alkaline pre-treatment. The alkaline pre-treatment produced refined extracts with higher purity; however, extraction yields increased from 2–5% to 7–19% by omitting this step. In particular, the ultrasound-assisted extraction allowed reducing 4-fold the extraction time, while keeping constant or even increasing the yield (up to 19% for the 1 h extraction) with respect to the conventional protocol. Interestingly, the presence of proteins and polyphenols conferred the semi-refined extracts a relatively high antioxidant capacity (19–24 μmol TE/g extract). The refined extract produced by the standard protocol formed the strongest hydrogels (>1000 g/cm2). On the other hand, the semi-refined extracts produced by the alternative protocols formed slightly stronger hydrogels (337–438 g/cm2) than the refined counterparts (224–311 g/cm2), due to their greater molecular weights of the former ones. LCA assessment showed lower global warming potential for the semi-refined extracts, especially the ultrasound-assisted extraction, hence highlighting the potential of this method to produce more sustainable agar-based extracts for food-related applications., This work was financially supported by the “Agencia Estatal de Investigación” (PCI2018-092886 Grant) and co-funded by the European Union's Horizon 2020 research and innovation programme (ERA-Net SUSFOOD2)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Valorization of alginate-extracted seaweed biomass for the development of cellulose-based packaging films

  • Cebrián-Lloret, Vera
  • Metz, Mandy
  • Martínez-Abad, Antonio
  • Knutsen, Svein Halvor
  • Ballance, Simon
  • López-Rubio, Amparo
  • Martínez Sanz, Marta
Seaweed residues from Alaria esculenta, Saccharina latissima and Ascophyllum nodosum after alginate extraction have been valorized to produce cellulose-based fractions with different purification degrees. The residues were mainly composed of carbohydrates (35–57%) and proteins (12–37%), Alaria and Saccharina being richer in cellulose and Ascophyllum richer in fucoidan. The lower cellulose content in the latter made it unsuitable for the extraction of cellulosic fractions. Self-supporting films were obtained from the cellulosic fractions from Saccharina and Alaria residues. While the higher cellulose purity films presented more desirable characteristics in terms of mechanical properties (with elastic moduli of ca. 5–7 GPa and elongation values of ca. 3–5%) and visual appearance, the presence of non-cellulosic components in the films from less purified fractions reduced their water sensitivity and promoted greater water barrier (with water permeability values of ca. 4–6 kg·m/s·m2·Pa). These results point towards the potential of a simple alkaline extraction to generate cellulose-based films from seaweed residuals with the best compromise between functional properties and economical and environmental efficiency., This work was financially supported by the “Agencia Estatal de Investigación” (PCI2018-092886 Grant) and co-funded by the European Union's Horizon 2020 research and innovation programme (ERA-Net SUSFOOD2) and the RTI2018-094408-J-I00 project (MCIU/AEI/FEDER,UE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Tesis doctoral (DoctoralThesis)

Valorization of marine biomass for the development of biopolymeric materials and additives with functional properties, Valorización de biomasa marina para el desarrollo de materiales biopoliméricos y aditivos con propiedades funcionales

  • Cebrián Lloret, Vera
[EN] This doctoral thesis focused on the valorization of different sources of marine biomass with the main purpose of developing biopolymeric materials and ingredients for the food industry. Thus, in the first part of the thesis, the valorization of biomass from different algae species was carried out to identify compounds of interest and assess their potential to produce biopolymeric materials and protein-rich food ingredients. Among these species was Ruguloperyx okamurae, an invasive brown seaweed that poses a threat to marine ecosystems. However, this species was shown to have significant potential as a sustainable source of bioactive compounds, transforming its role as a threat into a valuable opportunity. Red seaweed biomass was also highlighted for its potential in a variety of applications, including the development of cost-effective and environmentally friendly materials for food applications obtained through minimal processing. In this context, the composition and structure of the algal cell walls played a crucial role in understanding how each species behaves during processing and in the properties of the resulting films. In addition to the production of biopolymeric materials, red seaweeds were also studied as a source of proteins for human consumption. Although native seaweeds had low digestibility, this was improved through processing. However, it is important to note that, despite the improvement in digestibility, processing could induce the degradation of more labile amino acids, having a negative impact on the nutritional quality of the proteins. In the second part of this thesis, several species of red seaweeds were explored to extract agar more efficiently by simplified methods, and the suitability of the extracts obtained to develop biopolymeric materials and hydrogels for food applications was evaluated. It could be observed that the degree of agar purification had a significant impact on the final properties of both films and hydrogels. In the case of films, those made of pure agar exhibited superior properties; however, they underwent significant changes in their semicrystalline structure during storage. In contrast, those films derived from less purified agar extracts showed greater stability over time, suggesting the potential of less purified agars as additives to reduce costs and improve the stability of pure agar films. Regarding the hydrogels, agar purification led to the formation of hydrogels with significantly higher strength and hardness. On the other hand, the simplified extraction protocol produced less purified agar fractions containing other compounds such as proteins, polyphenols, and minerals. Although this resulted in less rigid and resistant hydrogels, this feature could be advantageous for the production of hydrogels with bioactive properties. In the third and last part of the thesis, the valorization of industrial wastes generated after alginate extraction was addressed, with the purpose of obtaining cellulosic fractions by simplified methods for their application in the production of biopolymeric materials. In this context, it was observed that the residues of Alaria esculenta and Saccharina latissima were suitable for the extraction of cellulosic fractions, while Ascophyllum nodosum might be more interesting for the production of fucoidan-rich extracts. Cellulosic fractions with higher purity produced films with more desirable mechanical properties and visual appearance. Conversely, less purified fractions presented a greater barrier to water vapor. According to the results, it was determined that the simple application of an alkaline treatment could produce cellulosic fractions that resulted in films with an optimal balance between functional properties and economic and environmental efficiency in biopolymeric material production., [ES] Esta tesis doctoral se centró en la valorización de diferentes fuentes de biomasa marina con el propósito principal de desarrollar materiales biopoliméricos e ingredientes destinados a la industria alimentaria. Así pues, en la primera parte de la tesis, se llevó a cabo la valorización de la biomasa de diversas especies de algas con el objetivo de identificar compuestos de interés y evaluar su potencial para la producción de materiales biopoliméricos e ingredientes alimentarios ricos en proteínas. Entre estas especies se encontraba Ruguloperyx okamurae, un alga parda invasora que representa una amenaza para los ecosistemas marinos. No obstante, se demostró que esta especie posee un potencial significativo como fuente sostenible de compuestos bioactivos, transformando su papel de amenaza en una valiosa oportunidad. La biomasa de las algas rojas también destacó por su potencial en diversas aplicaciones, incluyendo el desarrollo de materiales rentables y respetuosos con el medio ambiente para aplicaciones alimentarias obtenidos mediante de un procesado mínimo. En este contexto, la composición y la estructura de las paredes celulares de las algas desempeñaron un papel fundamental para entender cómo se comporta cada especie durante el procesado y en las propiedades de las películas resultantes. Además de la producción de materiales biopoliméricos, también se estudiaron las algas rojas como fuente de proteínas para el consumo humano. Aunque las algas nativas presentaron una baja digestibilidad, esta mejoró mediante su procesado. No obstante, es importante destacar que, a pesar de esta mejora en la digestibilidad, esta mejoró mediante su procesado. No obstante, es importante destacar que, a pesar de esta mejora en la digestibilidad, el procesado podía inducir la degradación de los aminoácidos más lábiles, lo que repercutía negativamente en la calidad nutricional de las proteínas. En la segunda parte de esta tesis, se exploraron varias especies de algas rojas para extraer agar de forma más eficiente mediante métodos simplificados, y se evaluó la idoneidad de los extractos obtenidos para desarrollar materiales biopoliméricos e hidrogeles para aplicaciones alimentarias. Se pudo observar que el grado de purificación del agar tuvo un impacto significativo en las propiedades finales tanto de las películas como de los hidrogeles. En el caso de las películas, las fabricadas con agar puro presentaron propiedades superiores; sin embargo, sufrieron cambios significativos en su estructura semicristalina durante el almacenamiento. Por el contrario, las películas derivadas de extractos de agar menos purificados mostraron una mayor estabilidad a lo largo del tiempo, sugiriendo su potencial como aditivo para reducir costes y mejorar la estabilidad de las películas de agar puro. En el caso de los hidrogeles, la purificación del agar condujo a la formación de hidrogeles con una resistencia y dureza significativamente altas. Por otro lado, el protocolo de extracción simplificado produjo fracciones de agar menos purificadas que contenían compuestos adicionales como proteínas, polifenoles y minerales. Aunque esto dio lugar a hidrogeles menos rígidos y resistentes, esta característica podría ser beneficiosa para la producción de hidrogeles con propiedades bioactivas. En la tercera y última parte de la tesis, se abordó la valorización de los residuos industriales generados tras la extracción de alginato, con el propósito de obtener fracciones de celulosa mediante métodos simplificados para su aplicación en la producción de materiales biopoliméricos. En este contexto, se observó que los residuos de Alaria esculenta y Saccharina latissima resultaron adecuados para la extracción de fracciones celulósicas, mientras que Ascophyllum nodosum podría ser más interesante para la producción de extractos ricos en fucoidano. Las fracciones de celulosa con mayor pureza generaron películas con propiedades mecánicas y aspecto visual más deseables. En cambio, las fracciones menos purificadas presentaron una mayor barrera al vapor de agua. De acuerdo con los resultados, se determinó que la simple aplicación de un tratamiento alcalino puede producir fracciones de celulosa que dan lugar a películas con un equilibrio óptimo entre propiedades funcionales y eficiencia económica y medioambiental., [CAT] Aquesta tesi doctoral es va centrar en la valorització de diferents fonts de biomassa marina amb el propòsit principal de desenvolupar materials biopolimèrics i ingredients destinats a la indústria alimentària. Així doncs, en la primera part de la tesi, es va dur a terme la valorització de la biomassa de diverses espècies d'algues amb l'objectiu d'identificar compostos d'interés i avaluar el seu potencial per a la producció de materials biopolimèrics i ingredients alimentaris rics en proteïnes. Entre aquestes espècies es trobava Ruguloperyx okamurae, una alga marró invasora que representa una amenaça per als ecosistemes marins. No obstant això, es va demostrar que aquesta espècie posseeix un potencial significatiu com a font sostenible de compostos bioactius, transformant el seu paper d'amenaça en una valuosa oportunitat. La biomassa de les algues roges també va destacar pel seu potencial en diverses aplicacions, incloent-hi el desenvolupament de materials rendibles i respectuosos amb el medi ambient per a aplicacions alimentàries obtinguts mitjançant d'un processament mínim. En aquest context, la composició i l'estructura de les parets cel·lulars de les algues van exercir un paper fonamental per a entendre com es comporta cada espècie durant el processament i en les propietats de les pel·lícules resultants. A més de la producció de materials biopolimèrics, les algues roges també es van estudiar com a font de proteïnes per al consum humà. Encara que les algues natives van presentar una baixa digestibilitat, aquesta va millorar mitjançant el seu processament. No obstant això, és important destacar que, malgrat aquesta millora en la digestibilitat, el processament podia induir la degradació dels aminoàcids més làbils, la qual cosa repercutia negativament en la qualitat nutricional de les proteïnes. En la segona part d'aquesta tesi, es van explorar diverses espècies d'algues roges per a extraure agar de manera eficient mitjançant mètodes simplificats i es va avaluar la idoneïtat dels extractes obtinguts per a desenvolupar materials biopolimèrics i hidrogels per a aplicacions alimentàries. Es va poder observar que el grau de purificació de l'agar va tindre un impacte significatiu en les propietats finals tant de les pel·lícules com dels hidrogels. En el cas de les pel·lícules, les fabricades amb agar pur van presentar propietats superiors; no obstant això, van patir canvis significatius en la seua estructura semicristal·lina durant l'emmagatzematge. No obstant això, les pel·lícules derivades d'extractes d'agar menys purificats van mostrar una major estabilitat al llarg del temps, suggerint el seu potencial com a additiu per a reduir costos i millorar l'estabilitat de les pel·lícules d'agar pur. En el cas dels hidrogels, la purificació de l'agar va conduir a la formació d'hidrogels amb una resistència i duresa significativament altes. D'altra banda, el protocol d'extracció simplificat va produir fraccions d'agar menys purificades que contenien compostos addicionals com a proteïnes, polifenols i minerals. Encara que això va donar lloc a hidrogels menys rígids i resistents, aquesta característica podria ser beneficiosa per a la producció d'hidrogels amb propietats bioactives. En la tercera i última part de la tesi, es va abordar la valorització dels residus industrials generats després de l'extracció d'alginat, amb el propòsit d'obtindre fraccions de cel·lulosa mitjançant mètodes simplificats per a la seua aplicació en la producció de materials biopolimèrics. En aquest context, es va observar que els residus de Alaria esculenta i Saccharina latissima van resultar adequats per a l'extracció de fraccions cel·lulòsiques, mentre que Ascophyllum nodosum podria ser més interessant per a la producció d'extractes rics en fucoidans. Les fraccions de cel·lulosa amb major puresa van generar pel·lícules amb propietats mecàniques i aspecte visual més desitjables. En canvi, les fraccions menys purificades van presentar una major barrera al vapor d'aigua. D'acord amb els resultats, es va determinar que la simple aplicació d'un tractament alcalí pot produir fraccions de cel·lulosa que donen lloc a pel·lícules amb un equilibri òptim entre propietats funcionals i eficiència econòmica i mediambiental., This work was financially supported by the “Agencia Estatal de Investigación” (PCI2018-092886 Grant) and co-funded by the European Union’s Horizon 2020 research and innovation programme (ERA-Net SUSFOOD2) and by the grant TED2021-129711B-I00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR. This work was done within the framework of a collaboration with HISPANAGAR S.L (Burgos, Spain). The research was funded by the Spanish Ministry of Science, Innovation and Universities through projects PID2020-114821RB-I00, PID2020-117744RJ-I00, as well as CEX2021-001189-S, funded by MCIN/AEI/10.13039/501100011033. The authors also acknowledge funding through project CIRCALGAE (Horizon Europe) under grant agreement 101060607. In all projects, funding from “ERDF A way of making Europe”, the “European Union” or the “European Union NextGenerationEU/PRTR” is also acknowledged., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001189-S)., Peer reviewed