Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

LES of a pressurized sooting aero-engine model burner using a computationally efficient discrete sectional method coupled to tabulated

  • García-Oliver, José M|||0000-0002-2676-9681
  • Pastor Enguídanos, José Manuel|||0000-0003-4458-0353
  • Olmeda-Ramiro, Iván
  • Kalbhor, A.
  • Mira Martínez, Daniel
  • Van-Oijen, Jeroen
[EN] This work is focused on the modeling and analysis of soot formation and oxidation in the pressurized ethylene-based model burner investigated at DLR. This burner features a dual swirler configuration for the primary air supply and includes secondary dilution jets inside the combustion chamber, showing reacting flow characteristics representative of the RQL combustor technology. Large-eddy simulations (LES) of the DLR burner are conduced here to assess a coupling approach between flamelet generated manifold (FGM) chemistry and discrete sectional method (DSM) based soot model with clustering method. First, a validation of the numerical results is conducted for the gas velocity and temperature fields, and good agreement is obtained for both mean and fluctuating quantities. The Soot Volume Fraction (SVF) computed from LES shows a satisfactory agreement with the experimental data in both SVF distribution and magnitude. The analysis also includes a numerical investigation of the soot production and the Particle Size Distributions (PSD). Finally, the configuration without secondary air is evaluated and an accurate prediction of the SVF field is also obtained. In this case, the absence of dilution air strongly influences the central region of the combustion chamber, and soot distribution and PSD are mainly affected by transport and dilution, not oxidation. It is finally concluded the proposed modeling framework is capable of predicting the soot field and particle size distributions inside the combustor for both operating conditions., The research leading to these results has received funding from the European Union's Horizon 2020 Programme under the ESTiMatE project, grant agreement No. 821418, and the AHEAD PID2020-118387RB-C33 and SAFLOW TED2021-131618B-C21 and TED2021-131618B-C22 projects from the Ministerio de Ciencia e Innovacion, Spain. We acknowledge PRACE for awarding us access through the SootAero project to HAWK at GCS@HLRS, Germany. The authors thankfully acknowledge the computer resources at LaPalma and MareNos-trum, and the technical support provided by Instituto de Astrofisica de Canarias (IM-2021-2-0027) and Barcelona Supercomputing Center (IM-2021-3-0016) . I. Olmeda acknowledges the Ayuda de Formacion de Profesorado Universitario (FPU 18/03065) from the Subprograma de Estatal de Formacion del Ministerio de Ciencia, Innovacion y Universidades of Spain. DM acknowledges the grant Ayudas para contratos Ramon y Cajal (RYC) 2021: RYC2021-034654-I from Ministerio de Ciencia e Innovacion.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A computational methodology to account for the liquid film thickness evolution in Direct Numerical Simulation of prefilming airblast atomization

  • Payri, Raul|||0000-0001-7428-5510
  • Salvador, Francisco Javier|||0000-0003-3269-2251
  • Carreres, Marcos|||0000-0001-6430-6613
  • Moreno-Montagud, C.
[EN] Prefilming airblast atomization is becoming widely used in current aero engines. Fundamental studies on the actual annular configuration of airblast atomizers are difficult to realize. For this reason, researchers have also focused on planar configurations. In this regard, the Karlsruhe Institute of Technology (KIT) developed a test rig to conduct experimental activities, conforming a large database with results for different working fluids and operating conditions. Such data allow two-phase flow modelers to validate their calculations concerning primary atomization on these devices. The present investigation proposes a Direct Numerical Simulation (DNS) study on the KIT planar configuration through the Volume of Fluid (VOF) method within the PARIS Simulator code. The novelty compared to DNS works reported in the literature resides in the use of a boundary condition that allows accounting not only for the gas inflow turbulence but also for the spatio-temporal evolution of the liquid film thickness at the DNS inlet and its related effect on turbulence. The proposed methodology requires computing precursor single-phase and two-phase flow Large-Eddy Simulations on the prefilmer flow, with the assumption that the flow between computational domains is one-way coupled. Results are compared to DNS that only account for a constant (both timewise and spanwise) liquid film thickness at the domain inlet, validating the full methodology workflow. The proposed methodology is shown to improve the qualitative description of the atomization mechanism, as the different stages of breakup (liquid accumulation behind the prefilmer edge, bag formation, bag breakup, ligament formation and ligament breakup) coexist spanwise for a given temporal snapshot. This implies a more continuous atomization than the one predicted by the constant film thickness case, which showed the same breakup stage to be present along the prefilmer span for a given instant and led to a more discretized set of atomization events. The proposed workflow allows quantifying the influence of the liquid film flow evolution above the prefilmer surface on primary breakup frequency and relevant atomization features., Research leading to these results has received funding from the Clean Sky 2 Joint Undertaking European Union's Horizon 2020 research and innovation programme through the ESTiMatE project, grant agreement 821418. The authors acknowledge PRACE for awarding access to computational resources on JOLIOT CURIE-AMD at GENCI@ CEA, France (proposal 2019204944). Computer resources at Marenostrum Supercomputer and the technical support provided by Barcelona Supercomputing Center (RES IM-2020-3-0018 and IM-2021-1-0010) in the frame of the Spanish Supercomputing Network is also thankfully acknowledged. Additionally, the support given to Mr. Carlos Moreno by Universitat Politecnica de Valencia, Spain through the "FPI Subprograma 2"grant within the "Programa de Apoyo para la Investigacion y Desarrollo (PAID-01-19)"is acknowledged. The authors must also thank Marco Crialesi and Wojciech Aniszewski for their technical advice on custom modifications on PARIS, and Johan Sundin for his implementation of the contact angle model. Help from Achille Schmitter, Hugo Martinez and Lucas Gonzalez processing the single-phase LES, two-phase LES, and DNS, respectively, is also appreciated.
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

LES of a pressurized sooting aero-engine model burner using a computationally efficient discrete sectional method coupled to tabulated chemistry

  • García Oliver, José María
  • Pastor, José Manuel
  • Olmeda, I.
  • Kalbhor, Abhijit
  • Mira Martínez, Daniel
  • van Oijen, Jeroen
This work is focused on the modeling and analysis of soot formation and oxidation in the pressurized ethylene-based model burner investigated at DLR. This burner features a dual swirler configuration for the primary air supply and includes secondary dilution jets inside the combustion chamber, showing reacting flow characteristics representative of the RQL combustor technology. Large-eddy simulations (LES) of the DLR burner are conduced here to assess a coupling approach between flamelet generated manifold (FGM) chemistry and discrete sectional method (DSM) based soot model with clustering method. First, a validation of the numerical results is conducted for the gas velocity and temperature fields, and good agreement is obtained for both mean and fluctuating quantities. The Soot Volume Fraction (SVF) computed from LES shows a satisfactory agreement with the experimental data in both SVF distribution and magnitude. The analysis also includes a numerical investigation of the soot production and the Particle Size Distributions (PSD). Finally, the configuration without secondary air is evaluated and an accurate prediction of the SVF field is also obtained. In this case, the absence of dilution air strongly influences the central region of the combustion chamber, and soot distribution and PSD are mainly affected by transport and dilution, not oxidation. It is finally concluded the proposed modeling framework is capable of predicting the soot field and particle size distributions inside the combustor for both operating conditions., The research leading to these results has received funding from the European Union’s Horizon 2020 Programme under the ESTiMatE project, grant agreement No. 821418, and the AHEAD PID2020- 118387RB-C33 and SAFLOW TED2021-131618B-C21 and TED2021-131618B-C22 projects from the Ministerio de Ciencia e Innovación, Spain . We acknowledge PRACE for awarding us access through the SootAero project to HAWK at GCS@HLRS, Germany. The authors thankfully acknowledge the computer resources at LaPalma and MareNostrum, and the technical support provided by Instituto de Astrofísica de Canarias (IM-2021-2-0027) and Barcelona Supercomputing Center (IM-2021-3-0016). I. Olmeda acknowledges the Ayuda de Formación de Profesorado Universitario (FPU 18/03065) from the Subprograma de Estatal de Formación del Ministerio de Ciencia, Innovación Universidades of Spain. DM acknowledges the grant Ayudas para contratos Ramón Cajal (RYC) 2021: RYC2021-034654-I from Ministerio de Ciencia e Innovación., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Evaporation of volatile droplets subjected to flame-like conditions

  • Both, Ambrus|||0000-0002-5267-204X
  • Mira Martínez, Daniel
  • Lehmkuhl Barba, Oriol|||0000-0002-2670-1871
This work assesses Lagrangian droplet evaporation models frequently used in spray combustion simulations, with the purpose of identifying the influence of modeling decisions on the single droplet behavior. Besides more simplistic models, the evaluated strategies include a simple method to incorporate Stefan flow effects in the heat transfer (Bird’s correction), a method to consider the interaction of Stefan flow with the heat and mass transfer films (Abramzon–Sirignano model), and a method to incorporate non-equilibrium thermodynamics (Langmuir–Knudsen model). The importance of each phenomena is quantified analytically and numerically under various conditions. Evaporation models ignoring Stefan flow are found to be invalid under the studied conditions. The Langmuir–Knudsen model is also deemed inadequate for high temperature evaporation, while Bird’s correction and the Abramzon–Sirignano model are identified as the most relevant for numerical studies of spray combustion systems. Latter is the most elaborate model studied here, as it considers Reynolds number effects beyond the empirical correlation of Ranz and Marshall derived for low-transfer rates. Thus, the Abramzon–Sirignano model is identified as the state of the art alternative in the scope of this study. }, We acknowledge the funding received through the ESTiMatE project from the Clean Sky 2 Joint Undertaking under the European Union’s Horizon 2020 research and innovation programme under grant agreement no. 821418 and through the Spanish Ministry of Economy and Competitiveness in the frame of the AHEAD project (PID2020-118387RB-C33)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

A computationally efficient approach for soot modeling with discrete sectional method and FGM chemistry

  • Kalbhor, Abhijit
  • Mira Martínez, Daniel
  • van Oijen, Jeroen
A novel approach for the prediction of soot formation in combustion simulations within the framework of discrete sectional method (DSM) based univariate soot model and Flamelet Generated Manifold (FGM) chemistry, referred to as FGM-CDSM, is proposed in this study. The FGM-CDSM considers the clustering of soot sections derived from the original soot particle size distribution function (PSDF) to minimize the computational cost. Unlike conventional DSM, in FGM-CDSM, governing equations for soot mass fractions are solved for the clusters, by using a pre-computed lookup table with tabulated soot source terms from the flamelet manifold, while the original soot PSDF is re-constructed in a post-processing stage. The flamelets employed for the manifold are computed with detailed chemistry and the complete sectional soot model. A comparative assessment of FGM-CDSM is conducted in laminar diffusion flames for its accuracy and computational performance against the detailed kinetics-based classical sectional model. Numerical results reveal that the FGM-CDSM can favorably reproduce the global soot quantities and capture their dynamic response predicted by detailed kinetics with a good qualitative agreement. Furthermore, compared to detailed kinetics, FGM-CDSM is shown to substantially reduce the computational cost of the complete reacting flow simulation with soot particle transport. Primarily, the use of FGM reduces the overall calculation by about two orders of magnitude compared to detailed kinetics, which is advanced further with the clustering of sections at a low memory footprint. Therefore, the present work demonstrates the promising capabilities of FGM-CDSM in the context of computationally efficient soot calculations and provides an excellent framework for extending its application to the simulations of turbulent sooting flames., The research leading to these results has received funding from the European Union’s Horizon 2020 Programme under the ESTiMatE project, grant agreement no. 821418. The authors gratefully acknowledge the Red Española de Supercomputación (RES) for computational resources.
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

LES investigation of soot formation in a turbulent non-premixed jet flame with sectional method and FGM chemistry

  • Kalbhor, Abhijit
  • Mira Martínez, Daniel
  • Both, Ambrus|||0000-0002-5267-204X
  • van Oijen, Jeroen
This study proposes a detailed soot modeling framework for large-eddy simulation (LES) to accurately predict soot formation and particle size distributions (PSD) in turbulent reacting flows. The framework incorporates Flamelet Generated Manifold (FGM) chemistry and a soot model based on the discrete sectional method (DSM) to predict both qualitative and quantitative sooting behavior while keeping the computational cost affordable. Two elementary modeling strategies are considered in the LES formalism for describing soot formation rates. These strategies rely on an a-priori tabulation of soot formation rates and their run-time computation. The LES formalism is applied to the simulations of a well-characterized, non-premixed, turbulent jet flame. A comparative analysis of strategies employed for filtered soot source term treatment is conducted to investigate their impact on the prediction of soot quantities and the evolution of soot PSDs. The LES results for the gas phase and soot phase are compared against the available experimental data. A good prediction of soot evolution is achieved with the two methodologies. The tabulation of soot formation rates leads to a significant reduction in computational cost compared to the model based on their explicit runtime computation. The LES results reveal that the modeling of filtered soot source terms has a significant impact on the quantitative prediction of soot formation. The possible reasons for the observed differences in the soot prediction are discussed. The run-time computation-based model provides a more consistent treatment of the non-linear interactions between the gas and soot phases in soot source terms compared to the tabulated soot chemistry approach. On the other hand, the tabulated soot chemistry model is an interesting and efficient modeling approach for predicting soot formation in turbulent conditions. Overall, both approaches have their strengths and limitations, and the choice of approach may depend on the specific needs of the application., The research leading to these results has received funding from the European Union’s Horizon 2020 Programme under the ESTiMatE project, grant agreement No. 821418, and the AHEAD PID2020-118387RB-C33 and SAFLOW TED2021-131618B-C21 projects from the Ministerio de Ciencia e Innovación. DM acknowledges the grant from the Ministerio de Ciencia e Innovación, Ayudas para contratos Ramón y Cajal (RYC) 2021: RYC2021-034654-I. The authors gratefully acknowledge the Partnership for Advanced Computing in Europe (PRACE) grant Soot Aero for computational resources and technical support in the numerical simulations., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

LES investigation of soot formation in a turbulent non-premixed jet flame with sectional method and FGM chemistry

  • Kalbhor, Abhijit
  • Mira Martínez, Daniel
  • Both, Ambrus
  • van Oijen, Jeroen
This study proposes a detailed soot modeling framework for large-eddy simulation (LES) to accurately predict soot formation and particle size distributions (PSD) in turbulent reacting flows. The framework incorporates Flamelet Generated Manifold (FGM) chemistry and a soot model based on the discrete sectional method (DSM) to predict both qualitative and quantitative sooting behavior while keeping the computational cost affordable. Two elementary modeling strategies are considered in the LES formalism for describing soot formation rates. These strategies rely on an a-priori tabulation of soot formation rates and their run-time computation. The LES formalism is applied to the simulations of a well-characterized, non-premixed, turbulent jet flame. A comparative analysis of strategies employed for filtered soot source term treatment is conducted to investigate their impact on the prediction of soot quantities and the evolution of soot PSDs. The LES results for the gas phase and soot phase are compared against the available experimental data. A good prediction of soot evolution is achieved with the two methodologies. The tabulation of soot formation rates leads to a significant reduction in computational cost compared to the model based on their explicit runtime computation. The LES results reveal that the modeling of filtered soot source terms has a significant impact on the quantitative prediction of soot formation. The possible reasons for the observed differences in the soot prediction are discussed. The run-time computation-based model provides a more consistent treatment of the non-linear interactions between the gas and soot phases in soot source terms compared to the tabulated soot chemistry approach. On the other hand, the tabulated soot chemistry model is an interesting and efficient modeling approach for predicting soot formation in turbulent conditions. Overall, both approaches have their strengths and limitations, and the choice of approach may depend on the specific needs of the application., The research leading to these results has received funding from the European Union’s Horizon 2020 Programme under the ESTiMatE project, grant agreement No. 821418, and the AHEAD PID2020-118387RB-C33 and SAFLOW TED2021-131618B-C21 projects from the Ministerio de Ciencia e Innovación. DM acknowledges the grant from the Ministerio de Ciencia e Innovación, Ayudas para contratos Ramón y Cajal (RYC) 2021: RYC2021-034654-I. The authors gratefully acknowledge the Partnership for Advanced Computing in Europe (PRACE) grant Soot Aero for computational resources and technical support in the numerical simulations., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Evaporation of volatile droplets subjected to flame-like conditions

  • Both, Ambrus
  • Mira Martínez, Daniel
  • Lehmkuhl Barba, Oriol
This work assesses Lagrangian droplet evaporation models frequently used in spray combustion simulations, with the purpose of identifying the influence of modeling decisions on the single droplet behavior. Besides more simplistic models, the evaluated strategies include a simple method to incorporate Stefan flow effects in the heat transfer (Bird’s correction), a method to consider the interaction of Stefan flow with the heat and mass transfer films (Abramzon–Sirignano model), and a method to incorporate non-equilibrium thermodynamics (Langmuir–Knudsen model). The importance of each phenomena is quantified analytically and numerically under various conditions. Evaporation models ignoring Stefan flow are found to be invalid under the studied conditions. The Langmuir–Knudsen model is also deemed inadequate for high temperature evaporation, while Bird’s correction and the Abramzon–Sirignano model are identified as the most relevant for numerical studies of spray combustion systems. Latter is the most elaborate model studied here, as it considers Reynolds number effects beyond the empirical correlation of Ranz and Marshall derived for low-transfer rates. Thus, the Abramzon–Sirignano model is identified as the state of the art alternative in the scope of this study. }, We acknowledge the funding received through the ESTiMatE project from the Clean Sky 2 Joint Undertaking under the European Union’s Horizon 2020 research and innovation programme under grant agreement no. 821418 and through the Spanish Ministry of Economy and Competitiveness in the frame of the AHEAD project (PID2020-118387RB-C33)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

LES of a pressurized sooting aero-engine model burner using a computationally efficient discrete sectional method coupled to tabulated chemistry

  • García Oliver, José María
  • Pastor, José Manuel
  • Olmeda, I.
  • Kalbhor, Abhijit
  • Mira Martínez, Daniel
  • van Oijen, Jeroen
This work is focused on the modeling and analysis of soot formation and oxidation in the pressurized ethylene-based model burner investigated at DLR. This burner features a dual swirler configuration for the primary air supply and includes secondary dilution jets inside the combustion chamber, showing reacting flow characteristics representative of the RQL combustor technology. Large-eddy simulations (LES) of the DLR burner are conduced here to assess a coupling approach between flamelet generated manifold (FGM) chemistry and discrete sectional method (DSM) based soot model with clustering method. First, a validation of the numerical results is conducted for the gas velocity and temperature fields, and good agreement is obtained for both mean and fluctuating quantities. The Soot Volume Fraction (SVF) computed from LES shows a satisfactory agreement with the experimental data in both SVF distribution and magnitude. The analysis also includes a numerical investigation of the soot production and the Particle Size Distributions (PSD). Finally, the configuration without secondary air is evaluated and an accurate prediction of the SVF field is also obtained. In this case, the absence of dilution air strongly influences the central region of the combustion chamber, and soot distribution and PSD are mainly affected by transport and dilution, not oxidation. It is finally concluded the proposed modeling framework is capable of predicting the soot field and particle size distributions inside the combustor for both operating conditions., The research leading to these results has received funding from the European Union’s Horizon 2020 Programme under the ESTiMatE project, grant agreement No. 821418, and the AHEAD PID2020- 118387RB-C33 and SAFLOW TED2021-131618B-C21 and TED2021-131618B-C22 projects from the Ministerio de Ciencia e Innovación, Spain . We acknowledge PRACE for awarding us access through the SootAero project to HAWK at GCS@HLRS, Germany. The authors thankfully acknowledge the computer resources at LaPalma and MareNostrum, and the technical support provided by Instituto de Astrofísica de Canarias (IM-2021-2-0027) and Barcelona Supercomputing Center (IM-2021-3-0016). I. Olmeda acknowledges the Ayuda de Formación de Profesorado Universitario (FPU 18/03065) from the Subprograma de Estatal de Formación del Ministerio de Ciencia, Innovación Universidades of Spain. DM acknowledges the grant Ayudas para contratos Ramón Cajal (RYC) 2021: RYC2021-034654-I from Ministerio de Ciencia e Innovación., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

A computationally efficient approach for soot modeling with discrete sectional method and FGM chemistry

  • Kalbhor, Abhijit
  • Mira Martínez, Daniel
  • van Oijen, Jeroen
A novel approach for the prediction of soot formation in combustion simulations within the framework of discrete sectional method (DSM) based univariate soot model and Flamelet Generated Manifold (FGM) chemistry, referred to as FGM-CDSM, is proposed in this study. The FGM-CDSM considers the clustering of soot sections derived from the original soot particle size distribution function (PSDF) to minimize the computational cost. Unlike conventional DSM, in FGM-CDSM, governing equations for soot mass fractions are solved for the clusters, by using a pre-computed lookup table with tabulated soot source terms from the flamelet manifold, while the original soot PSDF is re-constructed in a post-processing stage. The flamelets employed for the manifold are computed with detailed chemistry and the complete sectional soot model. A comparative assessment of FGM-CDSM is conducted in laminar diffusion flames for its accuracy and computational performance against the detailed kinetics-based classical sectional model. Numerical results reveal that the FGM-CDSM can favorably reproduce the global soot quantities and capture their dynamic response predicted by detailed kinetics with a good qualitative agreement. Furthermore, compared to detailed kinetics, FGM-CDSM is shown to substantially reduce the computational cost of the complete reacting flow simulation with soot particle transport. Primarily, the use of FGM reduces the overall calculation by about two orders of magnitude compared to detailed kinetics, which is advanced further with the clustering of sections at a low memory footprint. Therefore, the present work demonstrates the promising capabilities of FGM-CDSM in the context of computationally efficient soot calculations and provides an excellent framework for extending its application to the simulations of turbulent sooting flames., The research leading to these results has received funding from the European Union’s Horizon 2020 Programme under the ESTiMatE project, grant agreement no. 821418. The authors gratefully acknowledge the Red Española de Supercomputación (RES) for computational resources., Postprint (published version)