Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

A robust and automated methodology for the analysis of Time-Dependent Variability at transistor level

  • Saraza-Canflanca, Pablo|||0000-0003-2155-8305
  • Diaz-Fortuny, Javier|||0000-0002-8186-071X
  • Castro-Lopez, Rafael|||0000-0002-6247-3124
  • Roca, Elisenda|||0000-0001-6260-6495
  • Martin-Martinez, J.|||0000-0001-5938-5898
  • Rodriguez, R.|||0000-0002-4565-6703
  • Nafria, Montserrat|||0000-0002-9549-2890
  • Fernandez, Francisco V.|||0000-0001-8682-2280
In the past few years, Time-Dependent Variability has become a subject of growing concern in CMOS technologies. In particular, phenomena such as Bias Temperature Instability, Hot-Carrier Injection and Random Telegraph Noise can largely affect circuit reliability. It becomes therefore imperative to develop reliability-aware design tools to mitigate their impact on circuits. To this end, these phenomena must be first accurately characterized and modeled. And, since all these phenomena reveal a stochastic nature for deeply-scaled integration technologies, they must be characterized massively on devices to extract the probability distribution functions associated to their characteristic parameters. In this work, a complete methodology to characterize these phenomena experimentally, and then extract the necessary parameters to construct a Time-Dependent Variability model, is presented. This model can be used by a reliability simulator.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

On the impact of the biasing history on the characterization of random telegraph noise

  • Saraza-Canflanca, P.
  • Castro-López, Rafael
  • Roca, Elisenda
  • Martín-Martínez, Javier
  • Rodríguez, Rosana
  • Nafría, Montserrat
  • Fernández, Francisco V.
Random Telegraph Noise is a time-dependent variability phenomenon that has gained increased attention during the last years, especially in deeply-scaled technologies. In particular, there is a wide variety of works presenting different techniques designed to analyze current traces in scaled FET devices displaying Random Telegraph Noise, and others focused on modeling the phenomenon using the parameters extracted through such techniques. However, very little attention has been paid to the effects that the biasing conditions of the transistors prior to the measurements may have on the extraction of the parameters that characterize this phenomenon. This paper investigates how these biasing conditions actually impact the extracted results. Specifically, it is demonstrated that the results obtained when Random Telegraph Noise is measured immediately after the device is biased may lead to an overestimation of the Random Telegraph Noise impact with respect to situations in which the device has been previously biased for some time. This fact is, first, presented from a theoretical point of view, and, after, demonstrated experimentally through measurements obtained from a CMOS-transistor array., MCIN/AEI/10.13039/501100011033 (Grant Number: PID2019-103869RBC31 and PID2019-103869RB-C32) MCIN/AEI/10.13039/501100011033 (Grant Number: BES-2017-080160) “ESF Investing in your future”, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A DRV-based bit selection method for SRAM PUF key generation and its impact on ECCs

  • Santana-Andreo, A.
  • Saraza-Canflanca, P.
  • Carrasco-López, H.
  • Brox, Piedad
  • Castro-López, Rafael
  • Roca, Elisenda
  • Fernández, Francisco V.
- PUFs based on the power-up values of an array of SRAM cells are a popular solution to provide secure and low-cost key generation suitable for IoT devices. However, SRAM cells do not always power up to the same value due to external factors like noise, temperature, or aging. This results in a decrease of reliability for the SRAM PUF, an issue generally solved by employing complex Error Correction Codes (ECCs). However, ECCs significantly increase the cost of the complete system. A way to alleviate this issue is the use of bit selection methods, which increase the reliability of the SRAM PUF by using only the power-up values of the most reliable cells (i.e., the SRAM cells that consistently power up to the same value). In this work, the reduction in ECC complexity through a bit selection method based on the Data Retention Voltage metric is demonstrated., This work was supported by AEI under Project PID2019-103869RB-C31/AEI/10.13039/501100011033, and by P.O. FEDER under project US-1380876. Pablo Sarazá Canflanca and Andrés Santana Andreo acknowledge MICINN for supporting their research activity through the predoctoral grants BES-2017-080160 and PRE-2020-093167, respectively., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Statistical characterization of time-dependent variability defects using the maximum current fluctuation

  • Saraza-Canflanca, Pablo|||0000-0003-2155-8305
  • Martin-Martinez, J.|||0000-0001-5938-5898
  • Castro-Lopez, Rafael|||0000-0002-6247-3124
  • Roca, Elisenda|||0000-0001-6260-6495
  • Rodriguez, R.|||0000-0002-4565-6703
  • Fernandez, Francisco V.|||0000-0001-8682-2280
  • Nafria, Montserrat|||0000-0002-9549-2890
This article presents a new methodology to extract, at a given operation condition, the statistical distribution of the number of active defects that contribute to the observed device time-dependent variability, as well as their amplitude distribution. Unlike traditional approaches based on complex and time-consuming individual analysis of thousands of current traces, the proposed approach uses a simpler trace processing, since only the maximum and minimum values of the drain current during a given time interval are needed. Moreover, this extraction method can also estimate defects causing small current shifts, which can be very complex to identify by traditional means. Experimental data in a wide range of gate voltages, from near-threshold up to nominal operation conditions, are analyzed with the proposed methodology.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Statistical threshold voltage shifts caused by BTI and HCI at nominal and accelerated conditions

  • Diaz-Fortuny, Javier|||0000-0002-8186-071X
  • Saraza-Canflanca, Pablo|||0000-0003-2155-8305
  • Rodriguez, R.|||0000-0002-4565-6703
  • Martin-Martinez, J.|||0000-0001-5938-5898
  • Castro-Lopez, Rafael|||0000-0002-6247-3124
  • Roca, Elisenda|||0000-0001-6260-6495
  • Fernandez, Francisco V.|||0000-0001-8682-2280
  • Nafria, Montserrat|||0000-0002-9549-2890
In nowadays deeply scaled CMOS technologies, time-zero and time-dependent variability effects have become important concerns for analog and digital circuit design. For instance, transistor parameter shifts caused by Bias Temperature Instability and Hot-Carrier Injection phenomena can lead to progressive deviations of the circuit performance or even to its catastrophic failure. In this scenario, and to understand the effects of these variability sources, an extensive and accurate device characterization under several test conditions has become an unavoidable step towards trustworthy implementing the stochastic reliability models and simulation tools needed to achieve reliable integrated circuits. In this paper, the statistical distributions of threshold voltage shifts in nanometric CMOS transistors will be studied at nominal and accelerated aging conditions. To this end, a versatile transistor array chip and a flexible measurement setup have been used to reduce the required testing time to attainable values.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

On the impact of the biasing history on the characterization of random telegraph noise

  • Saraza-Canflanca, Pablo|||0000-0003-2155-8305
  • Castro-Lopez, Rafael|||0000-0002-6247-3124
  • Roca, Elisenda|||0000-0001-6260-6495
  • Martin-Martinez, J.|||0000-0001-5938-5898
  • Rodriguez, R.|||0000-0002-4565-6703
  • Nafria, Montserrat|||0000-0002-9549-2890
  • Fernandez, Francisco V.|||0000-0001-8682-2280
Random telegraph noise (RTN) is a time-dependent variability phenomenon that has gained increased attention during the last years, especially in deeply scaled technologies. In particular, there is a wide variety of works presenting different techniques designed to analyze current traces in scaled FET devices displaying RTN, and others focused on modeling the phenomenon using the parameters extracted through such techniques. However, very little attention has been paid to the effects that the biasing conditions of the transistors prior to the measurements may have on the extraction of the parameters that characterize this phenomenon. This article investigates how these biasing conditions actually impact the extracted results. In particular, it is demonstrated that the results obtained when RTN is measured immediately after the device is biased may lead to an overestimation of the RTN impact with respect to situations in which the device has been previously biased for some time. This fact is, first, presented from a theoretical point of view and, after, demonstrated experimentally through measurements obtained from a CMOS-transistor array.