Skip to main content

HIBRIDACION DE TECNOLOGIAS AVANZADAS DE ALMACENAMIENTO ELECTRICO PARA SISTEMAS BASADOS EN ENERGIAS RENOVABLES

DPI2016-80642-R

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2016
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD PUBLICA DE NAVARRA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Identification of critical parameters for the design of energy management algorithms for Li-ion batteries operating in PV power plants

  • Berrueta Irigoyen, Alberto
  • Soto Cabria, Adrián
  • Marcos Álvarez, Javier
  • Parra Laita, Íñigo de la
  • Sanchis Gúrpide, Pablo
  • Ursúa Rubio, Alfredo
Lithium-ion batteries are gaining importance for a variety of applications due to their price decrease and characteristics improvement. For a proper use of such storage systems, an energy management algorithm (EMA) is required. A number of EMAs, with various characteristics, have been published recently, given the diverse nature of battery problems. The EMA of deterministic battery problems is usually based on an optimization algorithm. The selection of such an algorithm depends on a few problem characteristics, which need to be identified and closely analyzed. The aim of this article is to identify the critical optimization problem parameters that determine the most suitable EMA for a Li-ion battery. With this purpose, the starting point is a detailed model of a Li-ion battery. Three EMAs based on the algorithms used to face deterministic problems, namely dynamic, linear, and quadratic programming, are designed to optimize the energy dispatch of such a battery. Using real irradiation and power price data, the results of these EMAs are compared for various case studies. Given that none of the EMAs achieves the best results for all analyzed cases, the problem parameters that determine the most suitable algorithm are identified to be four, i.e., desired computation intensity, characteristics of the battery aging model, battery energy and power capabilities, and the number of optimization variables, which are determined by the number of energy storage systems, the length of the optimization problem, and the desired time step., This work was supported in part by the European Union under the H2020 Project STARDUST under Grant 774094, in part by the Spanish State Research Agency and FEDER-UE under Grants DPI2016-80641-R, DPI2016-80642-R, PID2019-111262RB-I00, and PID2019-110956RB-I00, in part by the Government of Navarra through Research Project 0011-1411-2018-000029 GERA, and in part by the Public University of Navarre under Project ReBMS PJUPNA1904.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Maximum expected ramp rates using cloud speed sensor measurements

  • Wang, Guang Chao
  • Kurtz, Ben
  • Bosch, Juan Luis
  • Parra Laita, Íñigo de la
  • Kleissl, Jan
Large ramps and ramp rates in photovoltaic (PV) power output are of concern and sometimes even explicitly restricted by grid operators. Battery energy storage systems can smooth the power output and maintain ramp rates within permissible limits. To enable PV plant and energy storage system design and planning, a method to estimate the largest expected ramps for a given location is proposed. Because clouds are the dominant source of PV power output variability, an analytical relationship between the worst expected ramp rate, cloud motion vector, and the geometrical layout of the PV plant is developed. The ability of the proposed method to bracket actual ramp rates is assessed over 10 months under different meteorological conditions, demonstrating an average compliance rate of 98.9% for a 2 min evaluation time window. The largest observed ramp of 29.7% s(-1)is contained with the worst case estimate of 34.3% s(-1). This method provides a convenient yet economical approach to worst-case PV ramp rate modeling and is compatible with solar irradiance measured at coarse temporal resolution., Juan Bosch was financed in part by Project No. PID2019-108953RB-C21, funded by the Ministerio de Ciencia e Innovación and co-financed by the European Regional Development Fund. In addition, Iñigo de la Parra was partially supported by the Spanish State Research Agency (AEI) and FEDER-UE under Grant Nos. DPI2016-80641-R and DPI2016-80642-R.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Combined dynamic programming and region-elimination technique algorithm for optimal sizing and management of lithium-ion batteries for photovoltaic plants

  • Berrueta Irigoyen, Alberto
  • Heck, Michael
  • Jantsch, Martin
  • Ursúa Rubio, Alfredo
  • Sanchis Gúrpide, Pablo
The unpredictable nature of renewable energies is drawing attention to lithium-ion batteries. In order to make full utilization of these batteries, some research works are focused on the management of existing systems, while others propose sizing techniques based on business models. However, in order to optimise the global system, a comprehensive methodology that considers both battery sizing and management at the same time is needed. This paper proposes a new optimisation algorithm based on a combination of dynamic programming and a region elimination technique that makes it possible to address both problems at the same time. This is of great interest, since the optimal size of the storage system depends on the management strategy and, in turn, the design of this strategy needs to take account of the battery size. The method is applied to a real installation consisting of a 100 kWp rooftop photovoltaic plant and a Li-ion battery system connected to a grid with variable electricity price. Results show that, unlike conventional optimisation methods, the proposed algorithm reaches an optimised energy dispatch plan that leads to a higher net present value. Finally, the tool is used to provide a sensitivity analysis that identifies key informative variables for decision makers, The authors would like to acknowledge the support of the Spanish State Research Agency and FEDER-UE under grants DPI2016-80641-R and DPI2016-80642-R; of Government of Navarra through research project PI038 INTEGRA-RENOVABLES; and the FPU Program of the Spanish Ministry of Education, Culture and Sport (FPU13/00542).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

A comprehensive model for lithium-ion batteries: from the physical principles to an electrical model

  • Berrueta Irigoyen, Alberto
  • Urtasun Erburu, Andoni
  • Ursúa Rubio, Alfredo
  • Sanchis Gúrpide, Pablo
The growing interest in e-mobility and the increasing installation of renewable energy-based systems are leading to rapid improvements in lithium-ion batteries. In this context, battery manufacturers and engineers require advanced models in order to study battery performance accurately. A number of Li-ion battery models are based on the representation of physical phenomena by electrochemical equations. Although providing detailed physics-based information, these models cannot take into account all the phenomena for a whole battery, given the high complexity of the equations. Other models are based on equivalent circuits and are easier to design and use. However, they fail to relate these circuit parameters to physical properties. In order to take the best of both modeling techniques, we propose an equivalent circuit model which keeps a straight correlation between its parameters and the battery electrochemical principles. Consequently, this model has the required simplicity to be used in the simulation of a whole battery, while providing the depth of detail needed to identify physical phenomena. Moreover, due to its high accuracy, it can be used in a wide range of environments, as shown in the experimental validations carried out in the final section of this paper., The authors acknowledge the support of the Spanish State Research Agency (AEI) and FEDER UE under grants DPI2013 42853 R, DPI2016 80641 R and DPI2016 80642 R; of Government of Navarra through research project PI038 INTEGRA-RENOVABLES; and the FPU Program of the Spanish Ministry of Education, Culture and Sport (FPU13/00542).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Cloud tomography applied to sky images: a virtual testbed

  • Mejía, Felipe A.
  • Kurtz, Ben
  • Levis, Aviad
  • Parra Laita, Íñigo de la
  • Kleissl, Jan
Two tomographic techniques are applied to two simulated sets of sky images with different cloud fraction. The Algebraic Reconstruction Technique (ART) is applied to optical depth maps from sky images to reconstruct 3-D cloud extinction coefficients without considering multiple scattering effects. Reconstruction accuracy is explored for different products, including surface irradiance and extinction coefficients, and as a function of the number of available sky imagers and setup distance. Increasing the number of imagers improves the accuracy of the 3-D reconstruction: for surface irradiance, the error decreases significantly up to four imagers at which point the improvements become marginal. But using nine imagers gives more robust results in practical situations in which the circumsolar region of images has to be excluded due to poor cloud detection. The ideal distance between imagers was also explored: for a cloud height of 1 km, increasing distance up to 3 km (the domain length) improved the 3-D reconstruction. An iterative reconstruction technique that iteratively updated the source function improved the results of the ART by minimizing the error between input red radiance images and reconstructed red radiance simulations. For the best case of a nine-imager deployment, the ART and iterative method resulted in 53.4% and 33.6% relative mean absolute error for the extinction coefficients, respectively., The authors acknowledge funding from the California Energy Commission EPIC program. Felipe Mejia was supported by the National Science Foundation Graduate Research Fellowship under Grant No. (DGE-1144086). In addition, Íñigo de la Parra has been partially supported by the Spanish State Research Agency (AEI) and FEDER-UE under grants DPI2016-80641-R and DPI2016-80642-R.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Supercapacitors: electrical characteristics, modelling, applications and future trends

  • Berrueta Irigoyen, Alberto
  • Ursúa Rubio, Alfredo
  • San Martín Biurrun, Idoia
  • Eftekhari, Ali
  • Sanchis Gúrpide, Pablo
Energy storage systems are playing an increasingly important role in a variety of applications, such as electric vehicles or grid-connected systems. In this context, supercapacitors (SCs) are gaining ground due to their high power density, good performance and long maintenance-free lifetime. For this reason, SCs are a hot research topic, and several papers are being published on material engineering, performance characterization, modelling and post-mortem analysis. A compilation of the most important millstones on this topic is essential to keep researchers on related fields updated about new potentials of this technology. This review paper covers recent research aspects and applications of SCs, highlighting the relationship between material properties and electrical characteristics. It begins with an explanation of the energy storage mechanisms and materials used by SCs. Based on these materials, the SCs are classified, their key features are summarised, and their electrochemical characteristics are related to electrical performance. Given the high interest in system modelling and the large number of papers published on this topic, modelling techniques are classified, explained and compared, addressing their strengths and weaknesses, and the experimental techniques used to measure the modelled properties are described. Finally, the market sectors in which SCs are successfully used, as well as their growth expectations are analysed. The analysis presented herein gives account of the expansion that SC market is currently undergoing and identifies the most promising research trends on this field., This work was supported in part by the Spanish State Research Agency (AEI) and FEDER UE under Grant DPI2016-80641-R and Grant DPI2016-80642-R, in part by the Government of Navarre through the Research Project PI020 RENEWABLE-STORAGE, and in part by the FPU Program of the Spanish Ministry of Education, Culture and Sport under Grant FPU13 /00542.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

On the stability of advanced power electronic converters: the Generalized Bode Criterion

  • Lumbreras Magallón, David
  • Barrios Rípodas, Ernesto
  • Urtasun Erburu, Andoni
  • Ursúa Rubio, Alfredo
  • Marroyo Palomo, Luis
  • Sanchis Gúrpide, Pablo
A key factor in the design of power electronic converters is the development of control systems and, in particular, the determination of their stability. Due to ease of application, the Bode criteria are currently the most commonly used stability criteria, both with regard to its classic version and to the subsequent revisions proposed in the literature. However, as these criteria have a limited range of applicability, on occasions it is necessary to resort to other universally applicable criteria such as the Nyquist criterion. Unlike Bode, the Nyquist criterion can always be applied, although its use considerably complicates the tuning of the controller. This paper proposes a new stability criterion, called Generalized Bode Criterion, which is based on the Nyquist criterion and, therefore, always applicable, but calculated from both the Bode diagram and the 0 Hz phase of the open-loop transfer function, thus making the criterion easy to be applied. This way, the proposed criterion combines the advantages of Nyquist and Bode criteria and provides an interesting and useful tool to help in the controller design process. The validation of the criterion is made on a voltage control loop for a stand-alone PV system through simulation and experimental tests made on a voltage control loop for a stand-alone PV system including a battery, a boost converter, an inverter and an ac load. The tests are also used to show the limitations of the classic Bode criterion and its revisions to correctly determine the stability of complex systems. IEEE, This work was supported in part by the Spanish State Research Agency (AEI) and FEDER-UE underGrant DPI2016-80641-R and Grant DPI2016-80642-R, in part by the Public University of Navarre through a doctoral scholarship, and in part by the Ingeteam Power Technology
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Experimental assessment of cycling ageing of lithium-ion second-life batteries from electric vehicles

  • Braco Sola, Elisa
  • San Martín Biurrun, Idoia
  • Berrueta Irigoyen, Alberto
  • Sanchis Gúrpide, Pablo
  • Ursúa Rubio, Alfredo
The reutilization of batteries from electric vehicles allows to benefit from their remaining energy capacity and to increase their lifespan. The applications considered for the second life of these batteries are less demanding than electric vehicles regarding power and energy density. However, there is still some uncertainty regarding the technical and economic viability of these systems. In this context, the study of the ageing and lifetime of reused batteries is key to contribute to their development. This paper assesses the experimental cycle ageing of lithium-ion modules from different Nissan Leaf through accelerated cycling tests on their second life. The evolution of the internal parameters during ageing and the correlation between them are shown, including the analysis of best fitting curves. In addition, a second-life end-of-life criterion is proposed, based on capacity and internal resistance measurements during cells ageing, which can be applied to real application in order to prevent safety issues. By estimating future values from degradation trends and checking latter measurements, the ageing knee is identified. Results show that the modules operate for at least 2033 equivalent full cycles before reaching their ageing knee. This would mean more than 5 years of operation in a real second-life application, such as a photovoltaic self-consumption installation with daily cycling. Moreover, it is shown that a traditional cell characterisation based on capacity and internal resistance measurements is not enough to predict the durability of a cell during its second life., The authors would like to acknowledge the support of the European Union under the H2020 project STARDUST (774094), the Spanish State Research Agency (AEI) and FEDER–UE under grants DPI2016–80641-R, DPI2016–80642-R, PID2019–111262RB-I00 and PID2019–110956RB-I00, of Government of Navarra through research project 0011–1411–2018–000029 GERA and of Public University of Navarre under project ReBMS PJUPNA1904.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Methodology for sizing stand-alone hybrid systems: a case study of a traffic control system

  • San Martín Biurrun, Idoia
  • Berrueta Irigoyen, Alberto
  • Sanchis Gúrpide, Pablo
  • Ursúa Rubio, Alfredo
This paper proposes a methodology for sizing stand-alone hybrid photovoltaic-wind power generation systems. This methodology makes it possible to optimise the overall performance of the stand-alone system components, based on the premise of guaranteeing the power supply throughout the useful life of the installation at a minimum cost. The sizing is performed in two stages. Firstly, the components of the wind and photovoltaic power generation subsystem are obtained and, secondly, the size of the storage subsystem is determined. For the storage subsystem sizing, account is taken of the variation in efficiency according to the operating point and also the deterioration of the subsystem due to aging and, therefore, the loss of available energy during the useful life of the installation. This methodology is applied to a stand-alone traffic control system located on a secondary road in the Autonomous Community of Valencia (Spain). This system comprises wind and photovoltaic power generation components, a lithium battery bank and various traffic management components. Finally, an analysis of the proposed sizing is made. Satisfactory results are obtained, showing how the proposed methodology makes it possible to optimise the sizing of stand-alone systems with regard to the size of its components, cost and operation., This work has been supported by the Spanish State Research Agency (AEI) and FEDER-UE under grant DPI2013-42853-R, DPI2016-80642-R and DPI2016-80641-R; and by the Government of Navarre under project PIO38 INTEGRA-RENOVABLES.