Skip to main content

INTEGRACION DE MODELOS BIOMECANICOS EN EL DESARROLLO Y OPERACION DE ROBOTS REHABILITADORES RECONFIGURABLES

DPI2017-84201-R

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2017
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 16
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Paths of the cervical instantaneous axis of rotation during active movements-patterns and reliability

  • Venegas, William
  • Inglés, Marta
  • Serra-Añó, Pilar
  • Page Del Pozo, Alvaro Felipe|||0000-0002-5432-310X
[EN] The instantaneous helical axis (IHA) is a characteristic of neck movement that is very sensitive to changes in coordination and that has potential in the assessment of functional alterations. For its application in the clinical setting, normative patterns must be available, and its reliability must be established. The purpose of this work is to describe the continuous paths of the IHA during cyclic movements of flexion-extension (FE), lateral bending (LB), and axial rotation (AR) and to quantify their reliability. Fifteen healthy volunteers participated in the study; two repetitions were made on the same day (by different operators) and over an 8-day interval (by the same operator) to evaluate the inter-operator and inter-session reliability, respectively. The paths described by the IHA suggest a sequential movement of the vertebrae in the FE movement, with a large vertical displacement (mean, 10 cm). The IHA displacement in LB and AR movements are smaller. The paths described by the IHAs have a very high reliability for FE movement, although it is somewhat lower for LB and RA movements. The standard error of measurement (SEM) is less than 0.5 cm. These results show that the paths of the IHA are reliable enough to evaluate changes in the coordination of intervertebral movement., This work was partially supported by the Spanish Government and co-financed by EU FEDER funds (Grant DPI2017-84201-R). The work of W. Venegas was supported by the Escuela Politecnica Nacional de Quito (Proj. PIJ-1508).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Development of lower-limb rehabilitation exercises using 3-PRS Parallel Robot and Dynamic Movement Primitives

  • Escarabajal Sánchez, Rafael José
  • Abu Dakka, Fares Jawad Mohd
  • Pulloquinga Zapata, José
  • Mata Amela, Vicente|||0000-0003-2255-0567
  • Vallés Miquel, Marina|||0000-0002-6396-0098
  • Valera Fernández, Ángel|||0000-0001-6843-6394
[EN] The design of rehabilitation exercises applied to sprained ankles requires extreme caution, regarding the trajectories and the speed of the movements that will affect the patient. This paper presents a technique that allows a 3-PRS parallel robot to control such exercises, consisting of dorsi/plantar flexion and inversion/eversion ankle movements. The work includes a position control scheme for the parallel robot in order to follow a reference trajectory for each limb with the possibility of stopping the exercise in mid-execution without control loss. This stop may be motivated by the forces that the robot applies to the patient, acting like an alarm mechanism. The procedure introduced here is based on Dynamic Movement Primitives (DMPs)., This work has been partially funded by FEDER-CICYT project with reference DPI2017-84201-R financed by Ministerio de Economía, Industria e Innovación (Spain).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Optimal Reconfiguration of a Parallel Robot for Forward Singularities Avoidance in Rehabilitation Therapies. A Comparison via Different Optimization Methods

  • Llopis-Albert, Carlos|||0000-0002-1349-2716
  • Mata Amela, Vicente|||0000-0003-2255-0567
  • Valero Chuliá, Francisco José
  • Pulloquinga-Zapata, José
  • Zamora-Ortiz, Pau
  • Escarabajal-Sánchez, Rafael José
[EN] This paper presents an efficient algorithm for the reconfiguration of a parallel kinematic manipulator with four degrees of freedom. The reconfiguration of the parallel manipulator is posed as a nonlinear optimization problem where the design variables correspond to the anchoring points of the limbs of the robot on the fixed platform. The penalty function minimizes the forces applied by the actuators during a specific trajectory. Some constraints are imposed to avoid forward singularities and guarantee the feasibility of the active generalized coordinates for a certain trajectory. The results are compared with different optimization approaches with the aim of avoiding getting trapped into a local minimum and undergoing forward singularities. The comparison covers evolutionary algorithms, heuristics optimizers, multistrategy algorithms, and gradient-based optimizers. The proposed methodology has been successfully tested on an actual parallel robot for different trajectories., This research was funded by the Spanish Ministry of Education, Culture and Sports, grant number DPI2017-84201-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Reconfiguration of a parallel kinematic manipulator with 2T2R motions for avoiding singularities through minimizing actuator forces

  • Valero Chuliá, Francisco José
  • Díaz-Rodríguez, Miguel Ángel|||0000-0001-7243-4957
  • Vallés Miquel, Marina|||0000-0002-6396-0098
  • Besa Gonzálvez, Antonio José|||0000-0002-7084-9937
  • Bernabeu Soler, Enrique Jorge|||0000-0002-9866-8468
  • Valera Fernández, Ángel|||0000-0001-6843-6394
[EN] This paper aims to develop an approach for the reconfiguration of a parallel kinematic manipulator (PKM) with four degrees of freedom (DoF) designed to tackle tasks of diagnosis and rehabilitation in an injured knee. The original layout of the 4-DoF manipulator presents Type-II singular configurations within its workspace. Thus, we proposed to reconfigure the manipulator for avoiding such singularities (owing to the Forward Jacobian of the PKM) during typical rehabilitation trajectories. We achieve the reconfiguration of the PKM through a minimization problem where the design variables correspond to the anchoring points of the robot limbs on fixed and mobile platforms. The objective function relies on the minimization of the forces exert by the actuators for a specific trajectory. The minimization problem considers constraints equations to avoid Type-II singularities, which guarantee the feasibility of the active generalized coordinates for a particular path. To evaluate the proposed conceptual strategy, we build a prototype where reconfiguration occurs by moving the position of the anchoring points to holes bored in the fixed and mobile platforms. Simulations and experiments of several study cases enable testing the strategy performance. The results show that the reconfiguration strategy allows obtaining trajectories having minimum actuation forces without Type-II singularities., This work was supported by the Spanish Ministry of Education, Culture and Sports through the Project for Research and Technological Development with ref. DPI2017-84201-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Sustainability and optimization in the automotive sector for adaptation to government vehicle pollutant emission regulations

  • Rubio Montoya, Francisco José|||0000-0003-3465-702X
  • Llopis-Albert, Carlos|||0000-0002-1349-2716
  • Besa Gonzálvez, Antonio José|||0000-0002-7084-9937
  • Valero Chuliá, Francisco José
[EN] Future competitiveness in the automotive sector involves designing sustainability strategies to ensure compliance with government policies on environmental issues. This requires technological optimization to minimize vehicles' energy consumption and reduce greenhouse gas (GHG) emissions. This paper presents an algorithm to increase the energy efficiency of vehicles with internal combustion engines. On the one hand, the use of this algorithm optimizes the time spent traveling and, on the other, it reduces the energy consumed and the emission of polluting gases in line with the European Union (EU) guidelines in terms of reduction of greenhouse gas emissions, renewable energy share, and improvements in energy efficiency. Based on the difference in energy consumption between optimized and unoptimized vehicles, the economic benefit is quantified in terms of GHG emission quotas, volume of fuel consumed, and the indirect benefits with respect to improving corporate brand image. The methodology has been applied to real examples., This work was funded by the Programa Estatal de Investigacion de Proyectos I+D+i, del Ministerio de Ciencia, Innovacion y Universidades of Spain under the project DPI2017-84201-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Passive Exercise Adaptation for Ankle Rehabilitation Based on Learning Control Framework

  • Abu-Dakka, Fares J.
  • Escalera, Juan A.
  • Abderrahim, Mohamed
  • Valera Fernández, Ángel|||0000-0001-6843-6394
  • Page Del Pozo, Alvaro Felipe|||0000-0002-5432-310X
  • Mata Amela, Vicente|||0000-0003-2255-0567
[EN] Ankle injuries are among the most common injuries in sport and daily life. However, for their recovery, it is important for patients to perform rehabilitation exercises. These exercises are usually done with a therapist's guidance to help strengthen the patient's ankle joint and restore its range of motion. However, in order to share the load with therapists so that they can offer assistance to more patients, and to provide an efficient and safe way for patients to perform ankle rehabilitation exercises, we propose a framework that integrates learning techniques with a 3-PRS parallel robot, acting together as an ankle rehabilitation device. In this paper, we propose to use passive rehabilitation exercises for dorsiflexion/plantar flexion and inversion/eversion ankle movements. The therapist is needed in the first stage to design the exercise with the patient by teaching the robot intuitively through learning from demonstration. We then propose a learning control scheme based on dynamic movement primitives and iterative learning control, which takes the designed exercise trajectory as a demonstration (an input) together with the recorded forces in order to reproduce the exercise with the patient for a number of repetitions defined by the therapist. During the execution, our approach monitors the sensed forces and adapts the trajectory by adding the necessary offsets to the original trajectory to reduce its range without modifying the original trajectory and subsequently reducing the measured forces. After a predefined number of repetitions, the algorithm restores the range gradually, until the patient is able to perform the originally designed exercise. We validate the proposed framework with both real experiments and simulation using a Simulink model of the rehabilitation parallel robot that has been developed in our lab., This work has been partially funded by the FEDER-CICYT project with reference DPI2017-84201-R (Integracion de modelos biomecanicos en el desarrollo y operacion de robots rehabilitadores reconfigurables) financed by Ministerio de Economia, Industria e Innovacion (Spain).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Navigation of Autonomous Light Vehicles Using an Optimal Trajectory Planning Algorithm

  • Valera Fernández, Ángel|||0000-0001-6843-6394
  • Vallés Miquel, Marina|||0000-0002-6396-0098
  • Besa Gonzálvez, Antonio José|||0000-0002-7084-9937
  • Mata Amela, Vicente|||0000-0003-2255-0567
  • Llopis-Albert, Carlos|||0000-0002-1349-2716
  • Valero Chuliá, Francisco José
[EN] Autonomous navigation is a complex problem that involves different tasks, such as location of the mobile robot in the scenario, robotic mapping, generating the trajectory, navigating from the initial point to the target point, detecting objects it may encounter in its path, etc. This paper presents a new optimal trajectory planning algorithm that allows the assessment of the energy efficiency of autonomous light vehicles. To the best of our knowledge, this is the first time in the literature that this is carried out by minimizing the travel time while considering the vehicle's dynamic behavior, its limitations, and with the capability of avoiding obstacles and constraining energy consumption. This enables the automotive industry to design environmentally sustainable strategies towards compliance with governmental greenhouse gas (GHG) emission regulations and for climate change mitigation and adaptation policies. The reduction in energy consumption also allows companies to stay competitive in the marketplace. The vehicle navigation control is efficiently implemented through a middleware of component-based software development (CBSD) based on a Robot Operating System (ROS) package. It boosts the reuse of software components and the development of systems from other existing systems. Therefore, it allows the avoidance of complex control software architectures to integrate the different hardware and software components. The global maps are created by scanning the environment with FARO 3D and 2D SICK laser sensors. The proposed algorithm presents a low computational cost and has been implemented as a new module of distributed architecture. It has been integrated into the ROS package to achieve real time autonomous navigation of the vehicle. The methodology has been successfully validated in real indoor experiments using a light vehicle under different scenarios entailing several obstacle locations and dynamic parameters., This work has been partially funded by FEDER-CICYT project with reference DPI2017-84201-R financed by Ministerio de Economia, Industria e Innovacion (Spain).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Kinematic analysis and dimensional optimization of a 2R2T parallel manipulator

  • Araujo-Gómez, Pedro
  • Díaz-Rodríguez, Miguel
  • González Estrada, Octavio A.
  • Mata Amela, Vicente|||0000-0003-2255-0567
[EN] The need of a device providing two-translational and two-rotational movements led us to design a 3UPS-1RPU parallel manipulator. The manipulator consisted of a mobile platform connected to a base through one central leg and three external legs located at the same radial distance. By studying different locations of the legs anchoring point, we improved the first layout design, yet not the optimal one. On this basis, this paper focuses on the optimal dimensional design of the manipulator. To this end, we put forward the kinematics equations of the manipulator in accordance with the anchoring points coordinates. Through a numerical approach, the equations allowing to find the manipulator workspace are developed. Also, we find a global manipulability index using a local dexterity measure. The latter index serves as an optimal function. The optimization process considers joint constraints. Thus, we built a nonlinear optimization problem solved through sequential quadratic programming algorithms. We start by optimizing only a small set of parameters rather than the entire set, which gives us insights into the initial guess to optimize using the entire set. Findings show that the optimal design approach improves the dexterity of the manipulator and reduces the number of singular configurations while having almost the same workspace as the original layout., This work was supported by the Spanish Ministry of Education, Culture and Sports through the Project for Research and Technological Development with Ref. DPI2017-84201-R. We want to thank Professor Angel Valera and his team at the Laboratorio de Robotica, Universitat Politecnica de Valencia, for the image of the optimized manipulator's layout.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Automatic selection of the Groebner Basis&apos, monomial order employed for the synthesis of the inverse kinematic model of non-redundant open-chain robotic systems

  • Guzmán-Giménez, José
  • Díaz-Rodríguez, Miguel Ángel
  • Valera Fernández, Ángel|||0000-0001-6843-6394
  • Mata Amela, Vicente|||0000-0003-2255-0567
[EN] The methods most commonly used to synthesize the Inverse Kinematic Model (IKM) of open-chain robotic systems strongly depend on the robot's geometry, which make them difficult to systematize. In a previous work we presented a systematic procedure that relies on Groebner Bases to synthesize the IKM of non-redundant open-chain robots. This study expands the developed procedure with a methodology for the automatic selection of the basis' monomial order. The procedure's inputs are the robot's Denavit-Hartenberg parameters and the movement range of its actuators, while the output is the synthesized IKM, ready to be used in the robot's control system or in a simulation of its behavior. This procedure can synthesize the IKM of a wide range of open-chain robotic systems, such as Cartesian robots, SCARA, non-redundant multi-legged robots, and all non-redundant manipulators that satisfy the in-line wrist condition. The procedure's performance is assessed through two study cases of open-chain robots: a walking hexapod and a PUMA manipulator. The optimal monomial order is successfully identified for all cases. Also the output errors of the synthesized IKMs are negligible when evaluated in their corresponding workspaces, while their computation times are comparable to those required by the kinematic models calculated by traditional methods., This research was partially funded by Plan Nacional de IthornDthorni, Agencia Estatal de Investigacion del Ministerio de Economia, Industria y Competitividad del Gobierno de Espana, in the project FEDER-CICYT DPI201784201-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A New Method for Time Normalization Based on the Continuous Phase. Application to Neck Kinematics

  • Llopis-Albert, Carlos|||0000-0002-1349-2716
  • Page Del Pozo, Alvaro Felipe|||0000-0002-5432-310X
  • Venegas-Toro, William Ricardo
  • Farhat, Nidal
  • Zamora-Ortiz, Pau
[EN] There is growing interest in analyzing human movement data for clinical, sport, and ergonomic applications. Functional Data Analysis (FDA) has emerged as an advanced statistical method for overcoming the shortcomings of traditional analytic methods, because the information about continuous signals can be assessed over time. This paper takes the current literature a step further by presenting a new time scale normalization method, based on the Hilbert transform, for the analysis of functional data and the assessment of the effect on the variability of human movement waveforms. Furthermore, a quantitative comparison of well-known methods for normalizing datasets of temporal biomechanical waveforms using functional data is carried out, including the linear normalization method and nonlinear registration methods of functional data. This is done using an exhaustive database of human neck flexion-extension movements, which encompasses 423 complete cycles of 31 healthy subjects measured in two trials of the experiment on different days. The results show the advantages of the novel method compared to existing techniques in terms of computational cost and the effectiveness of time-scale normalization on the phase differences of curves and on the amplitude of means, which are assessed by Root Mean Square (RMS) values of functional means of angles, angular velocities, and angular accelerations. Additionally, the confidence intervals are obtained through a bootstrapping process., This research was funded by the Spanish Government and co-financed by EU FEDER funds (Grant DPI2017-84201-R) and by Escuela Politecnica Nacional de Quito (Grant PIJ-1508).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Synthesis of the Inverse Kinematic Model of Non-Redundant Open-Chain Robotic Systems Using Groebner Basis Theory

  • Guzmán-Giménez, José
  • Díaz-Rodríguez, Miguel Ángel
  • Valera Fernández, Ángel|||0000-0001-6843-6394
  • Mata Amela, Vicente|||0000-0003-2255-0567
[EN] One of the most important elements of a robot's control system is its Inverse Kinematic Model (IKM), which calculates the position and velocity references required by the robot's actuators to follow a trajectory. The methods that are commonly used to synthesize the IKM of open-chain robotic systems strongly depend on the geometry of the analyzed robot. Those methods are not systematic procedures that could be applied equally in all possible cases. This project presents the development of a systematic procedure to synthesize the IKM of non-redundant open-chain robotic systems using Groebner Basis theory, which does not depend on the geometry of the robot's structure. The inputs to the developed procedure are the robot's Denavit-Hartenberg parameters, while the output is the IKM, ready to be used in the robot's control system or in a simulation of its behavior. The Groebner Basis calculation is done in a two-step process, first computing a basis with Faugere's F4 algorithm and a grevlex monomial order, and later changing the basis with the FGLM algorithm to the desired lexicographic order. This procedure's performance was proved calculating the IKM of a PUMA manipulator and a walking hexapod robot. The errors in the computed references of both IKMs were absolutely negligible in their corresponding workspaces, and their computation times were comparable to those required by the kinematic models calculated by traditional methods. The developed procedure can be applied to all Cartesian robotic systems, SCARA robots, all the non-redundant robotic manipulators that satisfy the in-line wrist condition, and any non-redundant open-chain robot whose IKM should only solve the positioning problem, such as multi-legged walking robots., This research was partially funded by Plan Nacional de I+D+i, Agencia Estatal de Investigacion del Ministerio de Economia, Industria y Competitividad del Gobierno de Espana, in the project FEDER-CICYT DPI2017-84201-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Impact of digital transformation on the automotive industry

  • Llopis-Albert, Carlos|||0000-0002-1349-2716
  • Rubio Montoya, Francisco José|||0000-0003-3465-702X
  • Valero Chuliá, Francisco José
[EN] Digital technologies are transforming the automotive industry and disrupting traditional business models. New business opportunities related to Industry 4.0 are emerging, so companies must adapt to the new environment. The study presents an application of fuzzy-set qualitative comparative analysis (fsQCA) to analyze the future impact of digital transformation on business performance models and the different actors¿ satisfaction. A wide range of aspects and actors derived from the digital transformation process in the automotive industry are considered. The study covers connected and autonomous driving, mobility as a service, digital information sources in car purchasing, big data, etc. The disruptive effect of the gradual introduction of electric vehicles into the market is also considered, which is boosted by environmental policies on climate change and directives for the potential use of renewable energy sources to power electric vehicles. On the other hand, the study analyses the impacts of digital transformation on the automotive industry from the point of view of different actors, ranging from automobile manufacturers, service providers, public transportation providers, and consumers to governments. The methodology has been successfully applied to a complex case study¿based empirical analysis. It presents a novel application of fsQCA to digital transformation in the automotive industry in Spain. The conclusions show that it is necessary to invest in adequate measures for adaptation to digital transformation, and manufacturers will end up having greater profits, productivity, and competitiveness. From the point of view of consumers, there will be access to more and better services and greater satisfaction with the required services., This work was funded by the State Research Program of R&D Projects (Programa Estatal de Investigacion de Proyectos I+D+i) of the Spanish Ministry of Science, Innovation, and Universities under project DPI2017-84201-R
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Optimal Reconfiguration of a Limited Parallel Robot for Forward Singularities Avoidance

  • Llopis-Albert, Carlos|||0000-0002-1349-2716
  • Mata Amela, Vicente|||0000-0003-2255-0567
  • Valero, Francisco
  • Escarabajal, Rafael J.
  • Zamora-Ortiz, Pau
  • Pulloquinga, José L.
[EN] The positioning of the anchoring points of a Parallel Kinematic Manipulator has an important impact on its later performance. This paper presents an optimization problem to deal with the reconfiguration of a Parallel Kinematic manipulator with four degrees of freedom and the corresponding algorithms to address such problem, with the subsequent test on an actual robot. The cost function minimizes the forces applied by the actuators along the trajectory and considers singular positions and the feasibility of the active generalized coordinates. Results are compared among different algorithms, including evolutionary, heuristics, multi-strategy and gradient-based optimizers., This work was supported by the Spanish Ministry of Education, Culture and Sports through the Project for Research and Technological Development with Ref. DPI2017-84201-R
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Kinematic Design of a New Four Degree-of-Freedom Parallel Robot for Knee Rehabilitation

  • Aginaga, J.
  • Iriarte Goñi, X.
  • Plaza, A.
  • Mata Amela, Vicente|||0000-0003-2255-0567
[EN] Rehabilitation robots are increasingly being developed in order to be used by injured people to perform exercise and training. As these exercises do not need wide range movements, some parallel robots with lower mobility architecture can be an ideal solution for this purpose. This paper presents the design of a new four degree-of-freedom (DOF) parallel robot for knee rehabilitation. The required four DOFs are two translations in a vertical plane and two rotations, one of them around an axis perpendicular to the vertical plane and the other one with respect to a vector normal to the instantaneous orientation of the mobile platform. These four DOFs are reached by means of two RPRR limbs and two UPS limbs linked to an articulated mobile platform with an internal DOF. Kinematics of the new mechanism are solved and the direct Jacobian is calculated. A singularity analysis is carried out and the gained DOFs of the direct singularities are calculated. Some of the singularities can be avoided by selecting suitable values of the geometric parameters of the robot. Moreover, among the found singularities, one of them can be used in order to fold up the mechanism for its transportation. it is concluded that the proposed mechanism reaches the desired output movements in order to carry out rehabilitation maneuvers in a singularity-free portion of its workspace., This work was funded by the Plan Nacional de I + D, Comision Interministerial de Ciencia y Tecnologia (FEDER-CICYT) under the projects DPI2013-44227-R and DPI2017-84201-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Experimental analysis of Type II singularities and assembly change points in a 3UPS+RPU parallel robot

  • Pulloquinga-Zapata, José
  • Mata Amela, Vicente
  • Zamora-Ortiz, Pau
  • Díaz-Rodríguez, Miguel
  • Zambrano, Ivan
  • Valera Fernández, Ángel|||0000-0001-6843-6394
[EN] Parallel robots (PRs) have singular configurations where the robot gains at least one degree-of-freedom and loses control. Theoretically, such singularity occurs when the Forward Jacobian-Matrix determinant becomes zero (Type II). However, actual PRs could lose control owing to Type II singularities for determinant values near zero, but not zero, because manufacturing tolerances introduce errors that are complex to model due to their low repeatability. Thus, using an actual 3UPS+RPU PR, this paper presents three contributions: i) a proximity detection index for Type II singularities based on the angle between two Output Twist Screws. The index can identify which kinematic chains contribute to the singularity. ii) an experimental benchmark to study Type II singularities. iii) PR configurations where the proposed index is zero and the Forward Jacobian determinant is not. In this last configuration, the findings show that the actual robot is unable to handle external actions applied to the PR., This work was supported by the Spanish Government [Integracion de Modelos Biomecanicos en el Desarrollo y Operacion de Robots Rehabilitadores Reconfigurables, DPI2017-84201-R-AR]. It was also supported in part by Escuela Politecnica Nacional of Quito, [Control adaptativo basado en inteligencia artificial aplicado a un sistema mecatronico fundado en un robot paralelo para la diagnosis y rehabilitacion, PIMI-1504]
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Kinematic design of a new four degree-of-freedom parallel robot for knee rehabilitation

  • Aginaga García, Jokin
  • Iriarte Goñi, Xabier
  • Plaza Puértolas, Aitor
  • Mata, Vicente
Rehabilitation robots are increasingly being developed in order to be used by injured people to perform exercise and training. As these exercises do not need wide range movements, some parallel robots with lower mobility architecture can be an ideal solution for this purpose. This paper presents the design of a new four degree-of-freedom (DOF) parallel robot for knee rehabilitation. The required four DOFs are two translations in a vertical plane and two rotations, one of them around an axis perpendicular to the vertical plane and the other one with respect to a vector normal to the instantaneous orientation of the mobile platform. These four DOFs are reached by means of two RPRR limbs and two UPS limbs linked to an articulated mobile platform with an internal DOF. Kinematics of the new mechanism are solved and the direct Jacobian is calculated. A singularity analysis is carried out and the gained DOFs of the direct singularities are calculated. Some of the singularities can be avoided by selecting suitable values of the geometric parameters of the robot. Moreover, among the found singularities, one of them can be used in order to fold up the mechanism for its transportation. It is concluded that the proposed mechanism reaches the desired output movements in order to carry out rehabilitation maneuvers in a singularity-free portion of its workspace., This work was funded by the Plan Nacional de I + D, Comisión Interministerial de Ciencia y Tecnología (FEDER-CICYT) under the projects DPI2013-44227-R and DPI2017-84201-R.