Skip to main content

INTEGRACION DE MODELOS BIOMECANICOS EN EL DESARROLLO Y OPERACION DE ROBOTS REHABILITADORES RECONFIGURABLES

DPI2017-84201-R

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2017
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 20
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Paths of the cervical instantaneous axis of rotation during active movements-patterns and reliability

  • Venegas, William
  • Inglés, Marta
  • Serra-Añó, Pilar
  • Page Del Pozo, Alvaro Felipe|||0000-0002-5432-310X
[EN] The instantaneous helical axis (IHA) is a characteristic of neck movement that is very sensitive to changes in coordination and that has potential in the assessment of functional alterations. For its application in the clinical setting, normative patterns must be available, and its reliability must be established. The purpose of this work is to describe the continuous paths of the IHA during cyclic movements of flexion-extension (FE), lateral bending (LB), and axial rotation (AR) and to quantify their reliability. Fifteen healthy volunteers participated in the study; two repetitions were made on the same day (by different operators) and over an 8-day interval (by the same operator) to evaluate the inter-operator and inter-session reliability, respectively. The paths described by the IHA suggest a sequential movement of the vertebrae in the FE movement, with a large vertical displacement (mean, 10 cm). The IHA displacement in LB and AR movements are smaller. The paths described by the IHAs have a very high reliability for FE movement, although it is somewhat lower for LB and RA movements. The standard error of measurement (SEM) is less than 0.5 cm. These results show that the paths of the IHA are reliable enough to evaluate changes in the coordination of intervertebral movement., This work was partially supported by the Spanish Government and co-financed by EU FEDER funds (Grant DPI2017-84201-R). The work of W. Venegas was supported by the Escuela Politecnica Nacional de Quito (Proj. PIJ-1508).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Development of lower-limb rehabilitation exercises using 3-PRS Parallel Robot and Dynamic Movement Primitives

  • Escarabajal Sánchez, Rafael José
  • Abu Dakka, Fares Jawad Mohd
  • Pulloquinga Zapata, José
  • Mata Amela, Vicente|||0000-0003-2255-0567
  • Vallés Miquel, Marina|||0000-0002-6396-0098
  • Valera Fernández, Ángel|||0000-0001-6843-6394
[EN] The design of rehabilitation exercises applied to sprained ankles requires extreme caution, regarding the trajectories and the speed of the movements that will affect the patient. This paper presents a technique that allows a 3-PRS parallel robot to control such exercises, consisting of dorsi/plantar flexion and inversion/eversion ankle movements. The work includes a position control scheme for the parallel robot in order to follow a reference trajectory for each limb with the possibility of stopping the exercise in mid-execution without control loss. This stop may be motivated by the forces that the robot applies to the patient, acting like an alarm mechanism. The procedure introduced here is based on Dynamic Movement Primitives (DMPs)., This work has been partially funded by FEDER-CICYT project with reference DPI2017-84201-R financed by Ministerio de Economía, Industria e Innovación (Spain).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Optimal Reconfiguration of a Parallel Robot for Forward Singularities Avoidance in Rehabilitation Therapies. A Comparison via Different Optimization Methods

  • Llopis-Albert, Carlos|||0000-0002-1349-2716
  • Mata Amela, Vicente|||0000-0003-2255-0567
  • Valero Chuliá, Francisco José
  • Pulloquinga-Zapata, José
  • Zamora-Ortiz, Pau
  • Escarabajal-Sánchez, Rafael José
[EN] This paper presents an efficient algorithm for the reconfiguration of a parallel kinematic manipulator with four degrees of freedom. The reconfiguration of the parallel manipulator is posed as a nonlinear optimization problem where the design variables correspond to the anchoring points of the limbs of the robot on the fixed platform. The penalty function minimizes the forces applied by the actuators during a specific trajectory. Some constraints are imposed to avoid forward singularities and guarantee the feasibility of the active generalized coordinates for a certain trajectory. The results are compared with different optimization approaches with the aim of avoiding getting trapped into a local minimum and undergoing forward singularities. The comparison covers evolutionary algorithms, heuristics optimizers, multistrategy algorithms, and gradient-based optimizers. The proposed methodology has been successfully tested on an actual parallel robot for different trajectories., This research was funded by the Spanish Ministry of Education, Culture and Sports, grant number DPI2017-84201-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Reconfiguration of a parallel kinematic manipulator with 2T2R motions for avoiding singularities through minimizing actuator forces

  • Valero Chuliá, Francisco José
  • Díaz-Rodríguez, Miguel Ángel|||0000-0001-7243-4957
  • Vallés Miquel, Marina|||0000-0002-6396-0098
  • Besa Gonzálvez, Antonio José|||0000-0002-7084-9937
  • Bernabeu Soler, Enrique Jorge|||0000-0002-9866-8468
  • Valera Fernández, Ángel|||0000-0001-6843-6394
[EN] This paper aims to develop an approach for the reconfiguration of a parallel kinematic manipulator (PKM) with four degrees of freedom (DoF) designed to tackle tasks of diagnosis and rehabilitation in an injured knee. The original layout of the 4-DoF manipulator presents Type-II singular configurations within its workspace. Thus, we proposed to reconfigure the manipulator for avoiding such singularities (owing to the Forward Jacobian of the PKM) during typical rehabilitation trajectories. We achieve the reconfiguration of the PKM through a minimization problem where the design variables correspond to the anchoring points of the robot limbs on fixed and mobile platforms. The objective function relies on the minimization of the forces exert by the actuators for a specific trajectory. The minimization problem considers constraints equations to avoid Type-II singularities, which guarantee the feasibility of the active generalized coordinates for a particular path. To evaluate the proposed conceptual strategy, we build a prototype where reconfiguration occurs by moving the position of the anchoring points to holes bored in the fixed and mobile platforms. Simulations and experiments of several study cases enable testing the strategy performance. The results show that the reconfiguration strategy allows obtaining trajectories having minimum actuation forces without Type-II singularities., This work was supported by the Spanish Ministry of Education, Culture and Sports through the Project for Research and Technological Development with ref. DPI2017-84201-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Sustainability and optimization in the automotive sector for adaptation to government vehicle pollutant emission regulations

  • Rubio Montoya, Francisco José|||0000-0003-3465-702X
  • Llopis-Albert, Carlos|||0000-0002-1349-2716
  • Besa Gonzálvez, Antonio José|||0000-0002-7084-9937
  • Valero Chuliá, Francisco José
[EN] Future competitiveness in the automotive sector involves designing sustainability strategies to ensure compliance with government policies on environmental issues. This requires technological optimization to minimize vehicles' energy consumption and reduce greenhouse gas (GHG) emissions. This paper presents an algorithm to increase the energy efficiency of vehicles with internal combustion engines. On the one hand, the use of this algorithm optimizes the time spent traveling and, on the other, it reduces the energy consumed and the emission of polluting gases in line with the European Union (EU) guidelines in terms of reduction of greenhouse gas emissions, renewable energy share, and improvements in energy efficiency. Based on the difference in energy consumption between optimized and unoptimized vehicles, the economic benefit is quantified in terms of GHG emission quotas, volume of fuel consumed, and the indirect benefits with respect to improving corporate brand image. The methodology has been applied to real examples., This work was funded by the Programa Estatal de Investigacion de Proyectos I+D+i, del Ministerio de Ciencia, Innovacion y Universidades of Spain under the project DPI2017-84201-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Passive Exercise Adaptation for Ankle Rehabilitation Based on Learning Control Framework

  • Abu-Dakka, Fares J.
  • Escalera, Juan A.
  • Abderrahim, Mohamed
  • Valera Fernández, Ángel|||0000-0001-6843-6394
  • Page Del Pozo, Alvaro Felipe|||0000-0002-5432-310X
  • Mata Amela, Vicente|||0000-0003-2255-0567
[EN] Ankle injuries are among the most common injuries in sport and daily life. However, for their recovery, it is important for patients to perform rehabilitation exercises. These exercises are usually done with a therapist's guidance to help strengthen the patient's ankle joint and restore its range of motion. However, in order to share the load with therapists so that they can offer assistance to more patients, and to provide an efficient and safe way for patients to perform ankle rehabilitation exercises, we propose a framework that integrates learning techniques with a 3-PRS parallel robot, acting together as an ankle rehabilitation device. In this paper, we propose to use passive rehabilitation exercises for dorsiflexion/plantar flexion and inversion/eversion ankle movements. The therapist is needed in the first stage to design the exercise with the patient by teaching the robot intuitively through learning from demonstration. We then propose a learning control scheme based on dynamic movement primitives and iterative learning control, which takes the designed exercise trajectory as a demonstration (an input) together with the recorded forces in order to reproduce the exercise with the patient for a number of repetitions defined by the therapist. During the execution, our approach monitors the sensed forces and adapts the trajectory by adding the necessary offsets to the original trajectory to reduce its range without modifying the original trajectory and subsequently reducing the measured forces. After a predefined number of repetitions, the algorithm restores the range gradually, until the patient is able to perform the originally designed exercise. We validate the proposed framework with both real experiments and simulation using a Simulink model of the rehabilitation parallel robot that has been developed in our lab., This work has been partially funded by the FEDER-CICYT project with reference DPI2017-84201-R (Integracion de modelos biomecanicos en el desarrollo y operacion de robots rehabilitadores reconfigurables) financed by Ministerio de Economia, Industria e Innovacion (Spain).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Navigation of Autonomous Light Vehicles Using an Optimal Trajectory Planning Algorithm

  • Valera Fernández, Ángel|||0000-0001-6843-6394
  • Vallés Miquel, Marina|||0000-0002-6396-0098
  • Besa Gonzálvez, Antonio José|||0000-0002-7084-9937
  • Mata Amela, Vicente|||0000-0003-2255-0567
  • Llopis-Albert, Carlos|||0000-0002-1349-2716
  • Valero Chuliá, Francisco José
[EN] Autonomous navigation is a complex problem that involves different tasks, such as location of the mobile robot in the scenario, robotic mapping, generating the trajectory, navigating from the initial point to the target point, detecting objects it may encounter in its path, etc. This paper presents a new optimal trajectory planning algorithm that allows the assessment of the energy efficiency of autonomous light vehicles. To the best of our knowledge, this is the first time in the literature that this is carried out by minimizing the travel time while considering the vehicle's dynamic behavior, its limitations, and with the capability of avoiding obstacles and constraining energy consumption. This enables the automotive industry to design environmentally sustainable strategies towards compliance with governmental greenhouse gas (GHG) emission regulations and for climate change mitigation and adaptation policies. The reduction in energy consumption also allows companies to stay competitive in the marketplace. The vehicle navigation control is efficiently implemented through a middleware of component-based software development (CBSD) based on a Robot Operating System (ROS) package. It boosts the reuse of software components and the development of systems from other existing systems. Therefore, it allows the avoidance of complex control software architectures to integrate the different hardware and software components. The global maps are created by scanning the environment with FARO 3D and 2D SICK laser sensors. The proposed algorithm presents a low computational cost and has been implemented as a new module of distributed architecture. It has been integrated into the ROS package to achieve real time autonomous navigation of the vehicle. The methodology has been successfully validated in real indoor experiments using a light vehicle under different scenarios entailing several obstacle locations and dynamic parameters., This work has been partially funded by FEDER-CICYT project with reference DPI2017-84201-R financed by Ministerio de Economia, Industria e Innovacion (Spain).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Validación de los marcadores ArUco para el análisis de movimientos humanos

  • Jara, Nicolás
  • Abad, José
  • Navarro Lacreu, José Benito
  • Page Del Pozo, Alvaro Felipe|||0000-0002-5432-310X
[ES] En los últimos años se han publicado numerosos trabajos sobre el empleo de técnicas de bajo coste para el análisis de movimientos humanos, especialmente mediante sensores inerciales [1]. Menos esfuerzos se han realizado en la línea de otras técnicas basadas en video-análisis, donde la mayoría de trabajos se refieren al análisis de movimientos planos con una cámara [2]. Sin embargo, en el campo de la robótica se vienen usando desde hace tiempo sistemas de posicionado mediante marcadores de realidad aumentada (AR). Estos sistemas permiten analizar, en tiempo real y con una única cámara de video, la posición y orientación de objetos con precisión suficiente para su uso en muchas aplicaciones biomecánicas [3]. En particular, la librería ARUCO [4] permite analizar movimientos de varios marcadores de manera rápida y eficiente, lo que permite aplicarlos al análisis de varios segmentos corporales en tiempo real. En este trabajo se analiza la precisión de los marcadores ARUCO en la medida de ángulos y desplazamientos, comparando los movimientos medidos con el sistema con dos técnicas de precisión: encoders de desplazamientos lineales y giros, para las medidas estáticas, y un sistema de videofotogrametría de precisión, para las medidas en movimiento. Los resultados muestran que los marcadores pueden medir desplazamientos con errores estándar del orden de 1 mm en los desplazamientos paralelos al plano de la cámara y del orden de 3 mm en profundidad. Los errores angulares son inferiores a 0.5º en los giros en el plano de la cámara y del orden de 1º en los giros alrededor de ejes paralelos a dicho plano. Estos errores son mucho menores que los asociados a la variabilidad humana, por lo que sería posible utilizar este tipo de marcadores para numerosas aplicaciones biomecánicas., [EN] Although video-photogrammetry is the gold standard for human movement analysis, its complexity and high cost arouse interest in simpler and cheaper alternatives. One of them is videoanalysis, which allows analyzing movements in a plane. An alternative that allows the study of movements in 3D is the uaugmented reality markers (AR markers), widely used in the field of robotics. These systems allow to analyze, in real time and with a single video camera, the position and orientation of objects with sufficient precision for use in many biomechanical applications. This article analyzes the accuracy of ArUco markers in the measurement of angles and displacements, comparing the movements measured with the system with two precision techniques: encoders of linear and angular displacements and a standar equipment of videophotogrammetry . The results show that markers can measure displacements with errors lower than those associated with human variability, so it would be possible to use this type of markers in a wide variety of biomechanical applications., Este trabajo ha sido financiado por el Gobierno de España y cofinanciado por Fondos Feder de la UE gracias al proyecto PDI2017-84201-R (IMBIO3R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Patrones de desplazamiento del eje instantáneo de rotación del movimiento de elevación humeral

  • Cáceres Cáceres, Magda Liliana
  • Page Del Pozo, Alvaro Felipe|||0000-0002-5432-310X
[ES] En este trabajo se presentan los resultados de un estudio experimental para la descripción de las trayectorias descritas por el eje instantáneo de rotación (EIR) toracohumeral para movimientos cíclicos de elevación-descenso. Se ha desarrollado una técnica de análisis de movimientos mediante videofotogrametría que permite la medida del EIR del movimiento relativo húmero tórax con un error inferior a 1 cm y de forma muy reproducible [1,2]. Esto permite registrar el movimiento continuo del EIR como un axoide, cuyo desplazamiento mediolateral está relacionado con las velocidades de rotación de las articulaciones esternoclavicular, acromioclavicular y glenohumeral, y cuya posición vertical se asocia a la elevación de articulación glenohumeral [3] Se ha realizado un estudio con 45 sujetos sanos y 15 sujetos con patologías del hombro, analizando el movimiento cíclico de elevación-descenso del húmero en los planos frontal y escapular. La ubicación y forma de los axoides es sensible a los efectos de la carga y del estado funcional del sujeto. Así el efecto de la carga se manifiesta en un desplazamiento medial de la trayectoria del EIR, asociado a un movimiento más acusado de las articulaciones esternoclavicular, acromioclavicular frente al movimiento sin carga. Por otra parte, el efecto de la patología afecta a la trayectoria del EIR sólo a partir de cierto nivel de limitación funcional. Los patrones correspondientes a pacientes con limitaciones leves no muestran diferencias importantes frente a los sujetos sanos. Los resultados obtenidos muestran que el EIR puede ser de utilidad en la valoración funcional biomecánica del hombro, al ofrecer información sobre la coordinación de las diferentes articulaciones que lo constituyen., [EN] We present an experimental study for the description of the paths described by the thoracohumeral instantaneous helical axis (IHA) in cyclical movements. The movement was recorded by means of a motion analysis technique with videophotogrammetry that allows the measurement of the IHA with an error lower than 1 cm, in a very reproducible way. This makes it possible to represent the IHA as an axoid, whose mediolateral displacement is related to the angular velocities of the sternoclavicular, acromioclavicular and glenohumeral joints, and whose vertical position is associated with glenohumeral joint elevation. The study was carried out with 41 healthy subjects and 15 subjects with pathologies of the shoulder, analyzing the cyclic movement of elevation-lower of the humerus in the frontal and scapular planes. The location and shape of the axoids is sensitive to the effects of the load and the functional ability of the subjects. The results obtained show that the IHA can be useful in the biomechanical functional assessment of the shoulder, by offering information on the coordination of the different joints that constitute it., Este trabajo ha sido financiado por el Gobierno de España y cofinanciado por Fondos Feder de la UE gracias al proyecto PDI2017-84201-R (IMBIO3R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Kinematic analysis and dimensional optimization of a 2R2T parallel manipulator

  • Araujo-Gómez, Pedro
  • Díaz-Rodríguez, Miguel
  • González Estrada, Octavio A.
  • Mata Amela, Vicente|||0000-0003-2255-0567
[EN] The need of a device providing two-translational and two-rotational movements led us to design a 3UPS-1RPU parallel manipulator. The manipulator consisted of a mobile platform connected to a base through one central leg and three external legs located at the same radial distance. By studying different locations of the legs anchoring point, we improved the first layout design, yet not the optimal one. On this basis, this paper focuses on the optimal dimensional design of the manipulator. To this end, we put forward the kinematics equations of the manipulator in accordance with the anchoring points coordinates. Through a numerical approach, the equations allowing to find the manipulator workspace are developed. Also, we find a global manipulability index using a local dexterity measure. The latter index serves as an optimal function. The optimization process considers joint constraints. Thus, we built a nonlinear optimization problem solved through sequential quadratic programming algorithms. We start by optimizing only a small set of parameters rather than the entire set, which gives us insights into the initial guess to optimize using the entire set. Findings show that the optimal design approach improves the dexterity of the manipulator and reduces the number of singular configurations while having almost the same workspace as the original layout., This work was supported by the Spanish Ministry of Education, Culture and Sports through the Project for Research and Technological Development with Ref. DPI2017-84201-R. We want to thank Professor Angel Valera and his team at the Laboratorio de Robotica, Universitat Politecnica de Valencia, for the image of the optimized manipulator's layout.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Automatic selection of the Groebner Basis&apos, monomial order employed for the synthesis of the inverse kinematic model of non-redundant open-chain robotic systems

  • Guzmán-Giménez, José
  • Díaz-Rodríguez, Miguel Ángel
  • Valera Fernández, Ángel|||0000-0001-6843-6394
  • Mata Amela, Vicente|||0000-0003-2255-0567
[EN] The methods most commonly used to synthesize the Inverse Kinematic Model (IKM) of open-chain robotic systems strongly depend on the robot's geometry, which make them difficult to systematize. In a previous work we presented a systematic procedure that relies on Groebner Bases to synthesize the IKM of non-redundant open-chain robots. This study expands the developed procedure with a methodology for the automatic selection of the basis' monomial order. The procedure's inputs are the robot's Denavit-Hartenberg parameters and the movement range of its actuators, while the output is the synthesized IKM, ready to be used in the robot's control system or in a simulation of its behavior. This procedure can synthesize the IKM of a wide range of open-chain robotic systems, such as Cartesian robots, SCARA, non-redundant multi-legged robots, and all non-redundant manipulators that satisfy the in-line wrist condition. The procedure's performance is assessed through two study cases of open-chain robots: a walking hexapod and a PUMA manipulator. The optimal monomial order is successfully identified for all cases. Also the output errors of the synthesized IKMs are negligible when evaluated in their corresponding workspaces, while their computation times are comparable to those required by the kinematic models calculated by traditional methods., This research was partially funded by Plan Nacional de IthornDthorni, Agencia Estatal de Investigacion del Ministerio de Economia, Industria y Competitividad del Gobierno de Espana, in the project FEDER-CICYT DPI201784201-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A New Method for Time Normalization Based on the Continuous Phase. Application to Neck Kinematics

  • Llopis-Albert, Carlos|||0000-0002-1349-2716
  • Page Del Pozo, Alvaro Felipe|||0000-0002-5432-310X
  • Venegas-Toro, William Ricardo
  • Farhat, Nidal
  • Zamora-Ortiz, Pau
[EN] There is growing interest in analyzing human movement data for clinical, sport, and ergonomic applications. Functional Data Analysis (FDA) has emerged as an advanced statistical method for overcoming the shortcomings of traditional analytic methods, because the information about continuous signals can be assessed over time. This paper takes the current literature a step further by presenting a new time scale normalization method, based on the Hilbert transform, for the analysis of functional data and the assessment of the effect on the variability of human movement waveforms. Furthermore, a quantitative comparison of well-known methods for normalizing datasets of temporal biomechanical waveforms using functional data is carried out, including the linear normalization method and nonlinear registration methods of functional data. This is done using an exhaustive database of human neck flexion-extension movements, which encompasses 423 complete cycles of 31 healthy subjects measured in two trials of the experiment on different days. The results show the advantages of the novel method compared to existing techniques in terms of computational cost and the effectiveness of time-scale normalization on the phase differences of curves and on the amplitude of means, which are assessed by Root Mean Square (RMS) values of functional means of angles, angular velocities, and angular accelerations. Additionally, the confidence intervals are obtained through a bootstrapping process., This research was funded by the Spanish Government and co-financed by EU FEDER funds (Grant DPI2017-84201-R) and by Escuela Politecnica Nacional de Quito (Grant PIJ-1508).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Comparación de la normalización lineal de la escala de tiempos con el registro funcional continuo en movimientos cíclicos del cuello

  • López, Noelia
  • Venegas, William
  • Serra, Pilar
  • Page Del Pozo, Alvaro Felipe|||0000-0002-5432-310X
[ES] La normalización de la escala de tiempos es un paso necesario para aplicar las técnicas de análisis de datos funcionales al estudio de los movimientos humanos. La técnica estándar es la normalización lineal que, a pesar de su sencillez, puede ser ineficaz para reducir la variabilidad en la duración de los eventos [1]. Una alternativa es el registro continuo que supone ajustar de forma no lineal la escala de tiempos [2]. En este caso, la información temporal se mantiene en las funciones warping, que relacionan el tiempo modificado frente al promedio. No obstante, este procedimiento es complejo y computacionalmente costoso. Además, se ha señalado que en movimientos cíclicos como el de masticación apenas hay diferencias entre métodos [3]. En este trabajo se comparan ambos métodos en el caso del movimiento cíclico de flexo-extensión del cuello, analizando las funciones ángulo y velocidad angular. A partir de una base de datos con 437 ciclos completos extensión-flexión de cuello, se han aplicado ambos tipos de normalización de la escala temporal. Se han analizado las diferencias en las curvas medias y las desviaciones típicas funcionales, cuyos valores medios e intervalos de confianza se han establecido mediante un proceso de bootstrapping. Los resultados muestran que apenas hay diferencias en las curvas medias obtenidas por ambos procedimientos, aunque sí en las desviaciones típicas funcionales, que son algo menores en el caso del registro no lineal. Por otra parte, los resultados obtenidos con el registro no lineal son diferentes cuando se usan las curvas de posición o las de velocidad como referencia para el reescalado. Estos resultados sugieren que el registro no lineal, aunque puede ser útil para el análisis de señales no periódicas o donde no haya que analizar a la vez funciones y sus derivadas, no ofrece ventajas importantes frente a la normalización lineal en el caso de los movimientos cíclicos., [EN] The time scale normalization is a necessary step in the analysis of human movements. The standard technique is linear normalization that may be ineffective in reducing the variability in the duration of events. An alternative is the registration of functions that involves adjusting the time scale in a nonlinear way, a complex and computationally expensive procedure. In this work, both methods are compared for the cyclic movement of flexionextension of the neck. From a database with 437 complete cycles, we have analyzed the differences in mean curves and functional standard deviations, whose mean values and confidence intervals have been established through a bootstrapping process. The results show small, although significant, differences in the average curves obtained, with a greater amplitude in the angles and velocities. The functional standard deviations are somewhat lower when registration is used. These results suggest that the continuous registration, although it may be useful for the analysis of non-periodic signals, offers no significant advantages over linear normalization in the case of cyclic movements., Este trabajo ha sido financiado por el Gobierno de España y cofinanciado por Fondos Feder de la UE gracias al proyecto PDI2017-84201-R (IMBIO3R)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Synthesis of the Inverse Kinematic Model of Non-Redundant Open-Chain Robotic Systems Using Groebner Basis Theory

  • Guzmán-Giménez, José
  • Díaz-Rodríguez, Miguel Ángel
  • Valera Fernández, Ángel|||0000-0001-6843-6394
  • Mata Amela, Vicente|||0000-0003-2255-0567
[EN] One of the most important elements of a robot's control system is its Inverse Kinematic Model (IKM), which calculates the position and velocity references required by the robot's actuators to follow a trajectory. The methods that are commonly used to synthesize the IKM of open-chain robotic systems strongly depend on the geometry of the analyzed robot. Those methods are not systematic procedures that could be applied equally in all possible cases. This project presents the development of a systematic procedure to synthesize the IKM of non-redundant open-chain robotic systems using Groebner Basis theory, which does not depend on the geometry of the robot's structure. The inputs to the developed procedure are the robot's Denavit-Hartenberg parameters, while the output is the IKM, ready to be used in the robot's control system or in a simulation of its behavior. The Groebner Basis calculation is done in a two-step process, first computing a basis with Faugere's F4 algorithm and a grevlex monomial order, and later changing the basis with the FGLM algorithm to the desired lexicographic order. This procedure's performance was proved calculating the IKM of a PUMA manipulator and a walking hexapod robot. The errors in the computed references of both IKMs were absolutely negligible in their corresponding workspaces, and their computation times were comparable to those required by the kinematic models calculated by traditional methods. The developed procedure can be applied to all Cartesian robotic systems, SCARA robots, all the non-redundant robotic manipulators that satisfy the in-line wrist condition, and any non-redundant open-chain robot whose IKM should only solve the positioning problem, such as multi-legged walking robots., This research was partially funded by Plan Nacional de I+D+i, Agencia Estatal de Investigacion del Ministerio de Economia, Industria y Competitividad del Gobierno de Espana, in the project FEDER-CICYT DPI2017-84201-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Impact of digital transformation on the automotive industry

  • Llopis-Albert, Carlos|||0000-0002-1349-2716
  • Rubio Montoya, Francisco José|||0000-0003-3465-702X
  • Valero Chuliá, Francisco José
[EN] Digital technologies are transforming the automotive industry and disrupting traditional business models. New business opportunities related to Industry 4.0 are emerging, so companies must adapt to the new environment. The study presents an application of fuzzy-set qualitative comparative analysis (fsQCA) to analyze the future impact of digital transformation on business performance models and the different actors¿ satisfaction. A wide range of aspects and actors derived from the digital transformation process in the automotive industry are considered. The study covers connected and autonomous driving, mobility as a service, digital information sources in car purchasing, big data, etc. The disruptive effect of the gradual introduction of electric vehicles into the market is also considered, which is boosted by environmental policies on climate change and directives for the potential use of renewable energy sources to power electric vehicles. On the other hand, the study analyses the impacts of digital transformation on the automotive industry from the point of view of different actors, ranging from automobile manufacturers, service providers, public transportation providers, and consumers to governments. The methodology has been successfully applied to a complex case study¿based empirical analysis. It presents a novel application of fsQCA to digital transformation in the automotive industry in Spain. The conclusions show that it is necessary to invest in adequate measures for adaptation to digital transformation, and manufacturers will end up having greater profits, productivity, and competitiveness. From the point of view of consumers, there will be access to more and better services and greater satisfaction with the required services., This work was funded by the State Research Program of R&D Projects (Programa Estatal de Investigacion de Proyectos I+D+i) of the Spanish Ministry of Science, Innovation, and Universities under project DPI2017-84201-R
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Optimal Reconfiguration of a Limited Parallel Robot for Forward Singularities Avoidance

  • Llopis-Albert, Carlos|||0000-0002-1349-2716
  • Mata Amela, Vicente|||0000-0003-2255-0567
  • Valero, Francisco
  • Escarabajal, Rafael J.
  • Zamora-Ortiz, Pau
  • Pulloquinga, José L.
[EN] The positioning of the anchoring points of a Parallel Kinematic Manipulator has an important impact on its later performance. This paper presents an optimization problem to deal with the reconfiguration of a Parallel Kinematic manipulator with four degrees of freedom and the corresponding algorithms to address such problem, with the subsequent test on an actual robot. The cost function minimizes the forces applied by the actuators along the trajectory and considers singular positions and the feasibility of the active generalized coordinates. Results are compared among different algorithms, including evolutionary, heuristics, multi-strategy and gradient-based optimizers., This work was supported by the Spanish Ministry of Education, Culture and Sports through the Project for Research and Technological Development with Ref. DPI2017-84201-R
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Kinematic Design of a New Four Degree-of-Freedom Parallel Robot for Knee Rehabilitation

  • Aginaga, J.
  • Iriarte Goñi, X.
  • Plaza, A.
  • Mata Amela, Vicente|||0000-0003-2255-0567
[EN] Rehabilitation robots are increasingly being developed in order to be used by injured people to perform exercise and training. As these exercises do not need wide range movements, some parallel robots with lower mobility architecture can be an ideal solution for this purpose. This paper presents the design of a new four degree-of-freedom (DOF) parallel robot for knee rehabilitation. The required four DOFs are two translations in a vertical plane and two rotations, one of them around an axis perpendicular to the vertical plane and the other one with respect to a vector normal to the instantaneous orientation of the mobile platform. These four DOFs are reached by means of two RPRR limbs and two UPS limbs linked to an articulated mobile platform with an internal DOF. Kinematics of the new mechanism are solved and the direct Jacobian is calculated. A singularity analysis is carried out and the gained DOFs of the direct singularities are calculated. Some of the singularities can be avoided by selecting suitable values of the geometric parameters of the robot. Moreover, among the found singularities, one of them can be used in order to fold up the mechanism for its transportation. it is concluded that the proposed mechanism reaches the desired output movements in order to carry out rehabilitation maneuvers in a singularity-free portion of its workspace., This work was funded by the Plan Nacional de I + D, Comision Interministerial de Ciencia y Tecnologia (FEDER-CICYT) under the projects DPI2013-44227-R and DPI2017-84201-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis doctoral (DoctoralThesis)

Modelo músculo-esquelético del miembro inferior para rehabilitación con robot paralelo

  • Zamora Ortiz, Pau
[ES] El aumento de la esperanza de vida y la inversión de la pirámide poblacional plantean un desafío al sector sanitario debido al incremento de lesiones articulares y cirugías reconstructivas per cápita. Esto aumenta la demanda de personal rehabilitador en una sociedad con menos población activa. La robotización de las terapias puede aliviar esta presión al automatizar los ejercicios repetitivos. Además, el uso de tecnologías como los modelos músculo-esqueléticos mejoran las terapias, acortando los tiempos de recuperación y optimizan los resultados. La aplicación de modelos músculo-esqueléticos en robots de rehabilitación garantiza la seguridad del paciente al limitar las fuerzas excesivas y evitar posiciones peligrosas. Al mismo tiempo, brinda información adicional al personal rehabilitador para un seguimiento más preciso y personalizado de las terapias a los pacientes. Sin embargo, estos modelos son costosos computacionalmente, lo que dificulta su implementación en el control de robots. En el proyecto en el cual se integra esta tesis, se ha establecido el objetivo de construir un robot de rehabilitación que integre un modelo músculo-esquelético capaz de calcular en tiempo real las fuerzas musculares y articulares. Conocer las fuerzas garantiza la seguridad del paciente, proporciona información sobre las fuerzas durante los ejercicios y optimiza las terapias. Además, a partir del modelo músculo-esquelético se busca desarrollar nuevas herramientas para personalizar los ejercicios y mejorar los resultados. El modelo del miembro inferior, con seis grados de libertad, se ha simplificado para garantizar el cálculo en tiempo real. Se ha utilizado el concepto de grado de libertad funcional para predecir las relaciones entre los grados de libertad en un ejercicio concreto, reduciendo la carga computacional y permitiendo su uso en tiempo real durante los ejercicios de rehabilitación. El modelo consta de tres grados de libertad para la cadera, simulando una junta esférica, modelada como tres pares de revolución perpendiculares entre sí, uno para la rodilla, modelada como un mecanismo de cuatro barras, que simula el movimiento relativo entre el fémur y la tibia, y dos grados de libertad para el tobillo. Se calcula el centro de giro de la cadera y los parámetros del mecanismo de cuatro barras mediante ejercicios de calibración articular para lograr una mayor personalización del modelo. El tobillo se ha modelado empleando los datos de Klein Horsman debido a su dificultad de calibración. Del mismo trabajo se han tomado los parámetros musculares, los cuales se han simplificado para reducir el coste computacional. Se calculan las tensiones musculares mediante las condiciones de Karush-Kuhn-Tucker, minimizando el sumatorio cuadrático de las tensiones de los músculos. El modelo se ha validado y verificado siguiendo las recomendaciones de buenas prácticas de Hicks. Se han comparado los resultados del presente modelo con otro similar generado en AnyBody y con los datos empíricos del ``Grand Challenge", se ha analizado la solidez del modelo frente a las simplificaciones realizadas y los errores de los datos de entrada. Según los resultados obtenidos, el modelo músculo-esquelético es lo suficientemente preciso para ser utilizado en un robot de rehabilitación, garantizando la seguridad de los pacientes y prediciendo la activación muscular. Por último, se han desarrollado dos nuevas herramientas utilizando el modelo actual. La primera estima la Máxima Contracción Voluntaria del sujeto proyectando las fuerzas musculares al efector final del robot. La segunda herramienta calcula la fuerza externa necesaria para garantizar una fuerza muscular específica. Empleando ambas herramientas se logra una mayor personalización de las terapias de rehabilitación, mejorando el proceso. Ambas herramientas han sido probadas empleando el robot de rehabilitación., [CA] L'augment de l'esperança de vida i la inversió de la piràmide poblacional plantegen un desafiament al sector sanitari a causa de l'increment de lesions articulars i cirurgies reconstructives. Això augmenta la demanda de personal rehabilitador en una societat amb menys població activa. La robotització de les teràpies pot alleujar aquesta pressió a l'autoritzar els exercisses repetitius. A més, l'ús de tecnologies com els models múscul-esquelètics milloren les teràpies, acurtant els temps de recuperació i optimitzant els resultats. L'aplicació de models múscul-esquelètics en robots de rehabilitació garanteix la seguretat del pacient en limitar les forces excessives i evitar posicions perilloses. Al mateix temps, ofereix informació addicional al personal rehabilitador per a un seguiment més precís i personalitzat de les teràpies als pacients. No obstant això, aquests models són costosos computacionalment, el que dificulta la seua implementació en el control de robots. En el projecte en el qual s'integra aquesta tesi, s'ha establit l'objectiu de construir un robot de rehabilitació que integre un model múscul-esquelètic capaç de calcular en temps real les forces musculars i articulars. Conéixer les forces garanteix la seguretat del pacient, proporcionant informació sobre les forces durant els exercicis i optimitza les teràpies. A més, a partir del model múscul-esquelètic es busca desenvolupar noves ferramentes per a personalitzar els exercicis millorar els resultats. El model del membre inferior, amb sis graus de llibertat, s'ha simplificat per garantir el càlcul en temps real. S'ha utilitzat el concepte de grau de llibertat funcional per a predir les relacions entre els graus de llibertat d'un exercici concret, reduint la càrrega computacional i permitent el seu ús en temps real durant els exercisses de rehabilitació. El model consta de tres graus de llibertat per al maluc, simulant una junta esfèrica, modelant com tres parells de revolucions perpendiculars entre si, un per al genoll, modelat com un mecanisme de quatre barres, què simula el moviment relatiu entre el fèmur i la tíbia, i dos graus de llibertat per al turmell. Es calcula el centre de gir del maluc i els paràmetres del mecanisme de quatre barres mitjançant exercicis de calibratge articular per a aconseguir una major personalització del model. El turmell s'ha modelat emprant les dades de Klein Horsman a causa de la seua dificultat de calibració. Del mateix treball s'han pres els paràmetres musculars, els quals s'han simplificat per a reduir el cost computacional. S'ha calculat les tensions musculars mitjançant les condicions de Karush-Kuhn-Tucker, minimitzant el sumatori quadràtic de les tensions musculars. El model s'ha validat i verificat seguint les recomanacions de bones pràctiques d'Hicks. S'ha comparat els resultats del present model amb altre similar generat en AnyBody i amb les dades empíriques del ''Grand Challenge", s'ha analitzat la solidesa del model enfront de les simplificacions realitzades i els errors de les dades d'entrada. Segons els resultats obtinguts, el model múscul-esquelètic és prou precís per a ser utilitzat en un robot de rehabilitació, garantint la seguretat dels pacients i predient l'activació muscular. En últim lloc, s'han desenvolupat dues noves ferramentes utilitzant el model actual. La primera estima la Màxima Contracció Voluntària del subjecte projectant les forces musculars a l'efector final del robot. La segona ferramenta calcula la força externa necessària per a garantir una força muscular específica. Emprant totes dues eines s'aconsegueix una major personalització de les teràpies de rehabilitació, millorant el procés. Totes dues ferramentes han sigut provades fent servir el robot de rehabilitació., [EN] Increasing life expectancy and the inversion of the population pyramid pose a challenge to the healthcare sector due to the rise in joint injuries and reconstructive surgeries per capita. This increases the demand for rehabilitation personnel in a society with a smaller active population. The robotization of therapies can alleviate this pressure by automating repetitive exercises. Furthermore, the use of technologies like musculoskeletal models enhances therapies, reducing recovery times, and optimizing outcomes. The application of musculoskeletal models in rehabilitation robots ensures patient safety by limiting excessive forces and avoiding dangerous positions. At the same time, it provides additional information to rehabilitation personnel for more precise and personalized monitoring of patient therapies. However, these models have a high computational cost, which makes their implementation in robot control challenging. In the project that integrates this thesis, the objective has been set to build a rehabilitation robot that incorporates a musculoskeletal model capable of real-time calculation of muscular and joint forces. Understanding these forces ensures patient safety, provides information about forces during exercises, and optimizes therapies. Additionally, based on the musculoskeletal model, new tools are being developed to personalize exercises and improve results. The lower limb model, with six degrees of freedom, has been simplified to enable real-time calculation. The concept of functional degrees of freedom has been used to predict the relationships between degrees of freedom in a specific exercise, reducing the computational burden and enabling real-time use during rehabilitation exercises. The model consists of three degrees of freedom for the hip, simulating a spherical joint, modeled as three sets of perpendicular revolute pairs, one for the knee, modeled as a four-bar mechanism, that simulates the relative movement between the femur and the tibia, and two degrees of freedom for the ankle. The hip's pivot center and the parameters of the four-bar mechanism have been calculated through joint calibration exercises to achieve a higher level of model personalization. The ankle has been modeled using Klein Horsman's data due to its calibration complexity. Muscle parameters from the same work have been taken and simplified to reduce computational costs. Muscle tensions are calculated using the Karush-Kuhn-Tucker conditions, minimizing the squared sum of muscle tensions. The model has been validated and verified following Hicks' best practices recommendations. The results of this model have been compared with a similar one generated in AnyBody and with empirical data from the ``Grand Challenge". The model's robustness against the made simplifications and input data errors has been analyzed. According to the obtained results, the musculoskeletal model is accurate enough to be used in a rehabilitation robot, ensuring patient safety and predicting muscle activation. Finally, two new tools have been developed using the current model. The first one estimates the Maximum Voluntary Contraction of the subject by projecting muscular forces to the robot's end effector. The second tool calculates the external force required to achieve a specific muscular force. By employing both tools, greater personalization of rehabilitation therapies is achieved, improving the process. Both tools have been tested using the rehabilitation robot., Esta tesis y la investigación realizada han sido financiadas por la Agencia Estatal de Investigación con los proyectos “Integración de modelos biomecánicos en el desarrollo y operación de robots rehabilitadores reconfigurables” (DPI2017-84201-R-AR) y “Sistema robótico paralelo con control basado en modelo músculo-esquelético para la monitorización y entrenamiento del sistema propioceptivo” (PID2021-125694OB-I00). El autor de la presente tesis recibió la beca de la Agencia Estatal de Investigación: Ayuda para contrato predoctoral para la formación de doctores Zamora Ortiz, Pau. (PRE2018-083847). Con la cual ha podido dedicarse a tiempo completo a la formación e investigación que ha dado como fruto esta tesis doctoral.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Experimental analysis of Type II singularities and assembly change points in a 3UPS+RPU parallel robot

  • Pulloquinga-Zapata, José
  • Mata Amela, Vicente
  • Zamora-Ortiz, Pau
  • Díaz-Rodríguez, Miguel
  • Zambrano, Ivan
  • Valera Fernández, Ángel|||0000-0001-6843-6394
[EN] Parallel robots (PRs) have singular configurations where the robot gains at least one degree-of-freedom and loses control. Theoretically, such singularity occurs when the Forward Jacobian-Matrix determinant becomes zero (Type II). However, actual PRs could lose control owing to Type II singularities for determinant values near zero, but not zero, because manufacturing tolerances introduce errors that are complex to model due to their low repeatability. Thus, using an actual 3UPS+RPU PR, this paper presents three contributions: i) a proximity detection index for Type II singularities based on the angle between two Output Twist Screws. The index can identify which kinematic chains contribute to the singularity. ii) an experimental benchmark to study Type II singularities. iii) PR configurations where the proposed index is zero and the Forward Jacobian determinant is not. In this last configuration, the findings show that the actual robot is unable to handle external actions applied to the PR., This work was supported by the Spanish Government [Integracion de Modelos Biomecanicos en el Desarrollo y Operacion de Robots Rehabilitadores Reconfigurables, DPI2017-84201-R-AR]. It was also supported in part by Escuela Politecnica Nacional of Quito, [Control adaptativo basado en inteligencia artificial aplicado a un sistema mecatronico fundado en un robot paralelo para la diagnosis y rehabilitacion, PIMI-1504]
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Kinematic design of a new four degree-of-freedom parallel robot for knee rehabilitation

  • Aginaga García, Jokin
  • Iriarte Goñi, Xabier
  • Plaza Puértolas, Aitor
  • Mata, Vicente
Rehabilitation robots are increasingly being developed in order to be used by injured people to perform exercise and training. As these exercises do not need wide range movements, some parallel robots with lower mobility architecture can be an ideal solution for this purpose. This paper presents the design of a new four degree-of-freedom (DOF) parallel robot for knee rehabilitation. The required four DOFs are two translations in a vertical plane and two rotations, one of them around an axis perpendicular to the vertical plane and the other one with respect to a vector normal to the instantaneous orientation of the mobile platform. These four DOFs are reached by means of two RPRR limbs and two UPS limbs linked to an articulated mobile platform with an internal DOF. Kinematics of the new mechanism are solved and the direct Jacobian is calculated. A singularity analysis is carried out and the gained DOFs of the direct singularities are calculated. Some of the singularities can be avoided by selecting suitable values of the geometric parameters of the robot. Moreover, among the found singularities, one of them can be used in order to fold up the mechanism for its transportation. It is concluded that the proposed mechanism reaches the desired output movements in order to carry out rehabilitation maneuvers in a singularity-free portion of its workspace., This work was funded by the Plan Nacional de I + D, Comisión Interministerial de Ciencia y Tecnología (FEDER-CICYT) under the projects DPI2013-44227-R and DPI2017-84201-R.