Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 19
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Interactive Videos in IPTV using Hypervideo Links

  • Jimenez, Jose M.|||0000-0002-3688-7235
  • Lloret, Jaime|||0000-0002-0862-0533
  • Sendra, Sandra|||0000-0001-9556-9088
  • Abdullah, Miran Taha
[EN] One of the main advantages of Internet Protocol Television (IPTV) is the capability of full duplex communication between the Television (TV) provider and the clients which permits the interactivity of both. From this interactivity, TV providers can obtain extra information from clients. Moreover, clients can even take profit from this type of communication that allows them surfing between videos. However, this feature cannot be used in Digital Terrestrial Television (DTT). This paper shows the design and development of an interactive video for IPTV services that contains hypervideo links with additional information and content that is very useful for viewers. Furthermore, we detail the protocol used to maintain the service between the TV provider and the clients to maintain the service. Finally, the system is tested in a real scenario and the resulting measurements are provided in order to evaluate the network performance needed to offer an adequate service to each client because according to results shows, the use of hypervideo links does not imply an important increase in the ratio of packets per second., This work has been partially supported by the Postdoctoral Scholarship Contratos Postdoctorales UPV 2014 (PAID-10-14) of the Universitat Politècnica de València , by the Programa para la Formación de Personal Investigador (FPI-2015-S2-884) of the Universitat Politècnica de València .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Coincidence summing correction factors for 238U and 232Th decay series using the Monte Carlo method

  • Ordóñez-Ródenas, José|||0000-0001-8150-4873
  • Gallardo Bermell, Sergio|||0000-0002-3703-9983
  • Martorell Alsina, Sebastián Salvador|||0000-0003-1706-4740
  • Ortiz Moragón, Josefina
[EN] Environmental samples analyzed in gamma spectrometry laboratories usually contain natural radionuclides such as 238U and 232Th. Using gamma spectrometry techniques is possible to estimate the activity of these radionuclides by measuring the gamma emissions of radionuclides belonging to their decay chain. Nonetheless, some of these radionuclides emit photons in cascade presenting Coincidence Summing (CS), which if not corrected, may affect the final activity quantification. The aim of this work is to apply the Monte Carlo method to calculate the True Summing Correction Factors (TSCFs) for 238U and 232Th decay series for different sample configurations (geometry and matrix) using the GEANT4 toolkit. In order to validate the results provided by GEANT4 using the RDM, the software TRUECOINC has been applied to calculate also the TSCFs. In addition, the influence of the geometry/matrix on the TSCFs is analyzed., The authors gratefully acknowledge financial support from the Catedra CSN-UPV Vicente Serradell, Spain as well as the Laboratorio de Radiactividad Ambiental (Universitat Politecnica de Valencia), Spain for the dedicated funding and resources to this research work under Grant no. FPI-2015-S2-1576
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Intercomparison of full energy peak efficiency curves for an HPGe detector using MCNP6 and GEANT4

  • Ordóñez-Ródenas, José|||0000-0001-8150-4873
  • Gallardo Bermell, Sergio|||0000-0002-3703-9983
  • Sáez-Muñoz, Marina|||0000-0003-0180-7167
  • Martorell Alsina, Sebastián Salvador|||0000-0003-1706-4740
  • Ortiz Moragón, Josefina
[EN] This work is focused on studying the capabilities of different Monte Carlo tools to complement the Full Energy Peak Efficiency (FEPE) calibration procedures of the Environmental Radioactivity Laboratory of the Universitat Politècnica de València, UPV. In this frame, detailed models of a High Purity Germanium detector have been implemented using MCNP6 and GEANT4. Accordingly, an inter-comparison with experimental values ensures the model validation and improves the analysis of the physics phenomena involved. The validation of the models is determined by a quantitative comparison between the simulated and the measured efficiencies over the energy range under study (59.54¿1836.01 keV). The results show discrepancies between both Monte Carlo tools for 139Ce, 88Y and 60Co as GEANT4 is able to simulate the coincidence summing effect of these radionuclides., The authors gratefully acknowledge the Catedra CSN-UPV Vicente Serradell, Spain as well as the Laboratorio de Radiactividad Ambiental (Universitat Politecnica de Valencia), Spain for the dedicated funding and resources to this research work under Grant no. FPI-2015-S2-1576.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Analyzing the Performance of Software Defined Networks vs Real Networks

  • Jimenez, Jose M.|||0000-0002-3688-7235
  • Romero Martínez, José Oscar|||0000-0003-4081-9005
  • Lloret, Jaime|||0000-0002-0862-0533
  • Rego Máñez, Albert
[EN] Emulators and simulators provide an easy way to reduce hardware needs in experiments. Because of that, network researchers use applications that allow them to emulate or simulate networks, like Mininet in Software Defined Networks. It is desired to obtain very close results between the ones given in a virtual network and the ones obtained when the real network hardware is implemented in order to avoid using too much hardware in complex experiments without gathering unreal results. In this paper, we compare the experimental results obtained when a virtual network is generated by using Mininet versus a real implemented network. We have compared them varying the Maximum Transmission Unit (MTU) on Internet Protocol version 4 (IPv4) packets. Ethernet, Fiber Distributed Data Interface (FDDI), and Wireless Local Area Network 802.11 (WLAN 802.11) MTUs have been used in our experimental tests. We have worked with different link capabilities and generated traffic with different bandwidth., This work has been supported by the “Ministerio de Economía y Competitividad”, through the “Convocatoria 2014. Proyectos I+D - Programa Estatal de Investigación Científica y Técnica de Excelencia” in the “Subprograma Estatal de Generación de Conocimiento”, Project TIN2014- 57991-C3-1-P and the “Programa para la Formación de Personal Investigador – (FPI-2015-S2-884)” by the “Universitat Politècnica de València”.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Modeling and Experimental Validation of a Volumetric Expander Suitable for Waste Heat Recovery from an Automotive Internal Combustion Engine Using an Organic Rankine Cycle with Ethanol

  • Galindo, José|||0000-0001-6068-182X
  • Dolz, Vicente|||0000-0003-1511-6957
  • Royo-Pascual, Lucía
  • Haller, R.
  • Melis, J.
Waste heat recovery (WHR) in exhaust gas flow of automotive engines has proved to be a useful path to increase the overall efficiency of internal combustion engines (ICE). Recovery potentials of up to 7% are shown in several works in the literature. However, most of them are theoretical estimations. Some present results from prototypes fed by steady flows generated in an auxiliary gas tank and not with actual engine exhaust gases. This paper deals with the modeling and experimental validation of an organic Rankine cycle (ORC) with a swash-plate expander integrated in a 2 L turbocharged petrol engine using ethanol as working fluid. A global simulation model of the ORC was developed with a maximum difference of 5%, validated with experimental results. Considering the swash-plate as the main limiting factor, an additional specific submodel was implemented to model the physical phenomena in this element. This model allows simulating the fluid dynamic behavior of the swash-plate expander using a 0D model (Amesim). Differences up to 10.5% between tests and model results were found., This work is part of a research project called "Evaluation of bottoming cycles in ICEs to recover waste heat energies" funded by a National Project of the Spanish Government with reference TRA2013-46408-R. The authors thank also to Raul Lujan and Rafael Carrascosa for their contribution in the testing process. Authors want to acknowledge the "Apoyo para la investigacion y Desarrollo (PAID)" grant for doctoral studies (FPI S2 2015 1067).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Monte Carlo model of a BEGe detector to support gamma-spectrometry in an emergency response

  • Ordóñez-Ródenas, José|||0000-0001-8150-4873
  • Martorell Alsina, Sebastián Salvador|||0000-0003-1706-4740
  • Gallardo Bermell, Sergio|||0000-0002-3703-9983
  • Ortiz Moragón, Josefina
[EN] One of the problems of measuring high radioactivity in an emergency scenario is the fact that the detector can become saturated or reach a measuring dead time too high to give reliable results, which means repeating the measurement in different conditions with the associated delay in obtaining the results and the laboratory workers' risk of exposure. The counting rate can be controlled by varying the sample-to-detector distance as well as by using different source volumes. A Monte Carlo model of a BEGe detector was developed to analyse the system efficiency response for several measuring configurations (distances and volumes) using the MCNP6 code. The total efficiency curves were obtained for an energy range between 59.5 keV and 1836 keV. The simulations provided an estimation of the admissible gamma-rate for different source volumes (in water matrix) and sample-to-detector distances to avoid detector saturation in given measurement conditions. The results were a compromise between geometry, distance and measuring time for certain emergency situations. Three case studies are provided to show the approach's effectiveness., The authors gratefully acknowledge the Catedra CSN-UPV Vicente Serradell, Spain as well as the Laboratorio de Radiactividad Ambiental (Universitat Politecnica de Valencia), Spain, for the dedicated funding and resources for this research work under Grant No. FPI-2015-S2-1576. The authors are also grateful to the Valencian Agency for Security and Emergency and the Generalitat Valenciana for their support in the "Convenio de colaboracion entre la Agencia Valenciana de Seguridad y Respuesta a las Emergencias y la Universitat Politecnica de Valencia para el Desarrollo del Plan de Vigilancia Radiologica en Emergencias" under Grant No. S7042000, 2018.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A study on tip penetration velocity and radial expansion of reacting diesel sprays with different fuels

  • Desantes J.M.|||0000-0002-4124-9393
  • García-Oliver, José M|||0000-0002-2676-9681
  • Xuan, Tiemin
  • Vera-Tudela-Fajardo, Walter Martin
[EN] The reacting diesel spray structure was investigated using n-dodecane, n-heptane and one binary blend of Primary Reference Fuels (80% n-heptane and 20% iso-octane in mass) based on the existing database from previous experimental results from Schlieren imaging technique in a constant pressure combustion chamber. The spray tip velocity was derived from the derivative of tip penetration versus time. The operating conditions and the injector used (single axially-oriented hole, 89 mm-diameter) were chosen following the guidelines of the Engine Combustion Network. A 1D spray model was also applied here to support the analysis of experimental results. Parametric variations of injection pressure, ambient temperature and oxygen concentration have been performed for each fuel. Analysis of radial expansion and reacting tip velocity was performed in terms of an average spray radial increase (DR) and a constant (k) defining the tip penetration velocity. k values of reacting cases are always bigger than those from inert ones for both experimental and theoretical results. Based upon this parameter, quasi-steady tip penetration under the investigated conditions seems not to be affected by ambient temperature, oxygen content or fuel cetane number. Three cases with different fuels and similar ignition delay and lift-off length were further analyzed, which shows that the reactivity of the mixture has an effect on the transition timing from inert to reacting states, as well as on the initial penetration stages, but not on the quasi-steady phase. Apart from the similar tip velocity during quasi-steady phase, the full transient evolution of the tip is highly similar. The fact that this full overlap does not occur for other operating conditions indicates that early penetration stages are highly affected by the transient chemistry development, which largely depends on fuel cetane number., This study was partially funded by the Spanish Ministry of Economy and Competitiveness in the frame of the COMEFF (TRA2014-59483-R) project. Funding for Tiemin Xuan's PhD studies was granted by Universitat Politecnica de Valencia through the Programa de Apoyo para la Investigacion y Desarrollo (PAID) (Grant reference FPI-2015-S2-1068).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A new tool to test the IP network performance

  • Barambones, Carlos
  • García-García, Laura
  • Jimenez, Jose M.|||0000-0002-3688-7235
  • Lloret, Jaime|||0000-0002-0862-0533
[EN] One of the main necessities in IP networks is the lack of tools to test the performance of the network when it is already implemented. Network management tools are generally used when it is required to test what happens in the network after a failure and when the administrators need to measure the amount of time it takes to recover from unexpected events. But, this solution does not allow testing the traffic that is being distributed inside of the network or to measure the exact time the network takes to recover from a failure. In this paper, we present a new tool to carry out network performance tests when it is already implemented. The displayed parameters are jitter, delay, received messages, lost messages, % of lost messages, and bandwidth. In order to test its effectiveness, we conduct a series of measurements on a real network., This work has been supported by the “Ministerio de Economía y Competitividad”, through the “Convocatoria 2014. Proyectos I+D - Programa Estatal de Investigación Científica y Técnica de Excelencia” in the “Subprograma Estatal de Generación de Conocimiento”, project TIN2014-57991-C3-1-P and the “programa para la Formación de Personal Investigador – (FPI-2015-S2-884)” by the “Universitat Politècnica de València”.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Optical study on characteristics of non-reacting and reacting diesel spray with different strategies of split injection

  • Desantes J.M.|||0000-0002-4124-9393
  • García-Oliver, José M|||0000-0002-2676-9681
  • García Martínez, Antonio|||0000-0001-5783-4936
  • Xuan, Tiemin
[EN] Even though studies on split-injection strategies have been published in recent years, there are still many remaining questions about how the first injection affects the mixing and combustion processes of the second one by changing the dwell time between both injection events or by the first injection quantity. In this article, split-injection diesel sprays with different injection strategies are investigated. Visualization of n-dodecane sprays was carried out under both non-reacting and reacting operating conditions in an optically accessible two-stroke engine equipped with a single-hole diesel injector. High-speed Schlieren imaging was applied to visualize the spray geometry development, while diffused backgroundillumination extinction imaging was applied to quantify the instantaneous soot production (net result of soot formation and oxidation). For non-reacting conditions, it was found that the vapor phase of second injection penetrates faster with a shorter dwell time and independently of the duration of the first injection. This could be explained in terms of onedimensional spray model results, which provided information on the local mixing and momentum state within the flow. Under reacting conditions, interaction between the second injection and combustion recession of the first injection is observed, resulting in shorter ignition delay and lift-off compared to the first injection. However, soot production behaves differently with different injection strategies. The maximum instantaneous soot mass produced by the second injection increases with a shorter dwell time and with longer first injection duration., The author(s) disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: This study was partially funded by the Spanish Ministry of Economy and Competitiveness in the frame of the advanced spray combustion models for efficient powertrains (COMEFF) (TRA2014-59483-R) project. Funding for Tiemin Xuan's PhD studies was granted by Universitat Politecnica de Valencia through the Programa de Apoyo para la Investigacion y Desarrollo (PAID) (grant reference FPI-2015-S2-1068)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Autonomous video compression system for environmental monitoring

  • Mateos-Cañas, Irene
  • Sendra, Sandra|||0000-0001-9556-9088
  • Lloret, Jaime|||0000-0002-0862-0533
  • Jimenez, Jose M.|||0000-0002-3688-7235
[EN] The monitoring of natural environments is becoming a very controversial topic because people are more and more concerned about preserving and monitoring these natural spaces. The monitoring tasks are usually complemented with a network infrastructure composed by cameras and network devices that make easy the remote visualization of the monitored environments. This work presents the design, implementation and test of an autonomous video compression system for environmental monitoring. The system is based on a server in charge of collecting the videos and analyzing the network constraints. As a function of the measured parameters and the predominant color of the requested video, the system determines the best compression codec for transmitting the video through the network. Additionally, the server should run an algorithm developed in Python and MATLAB(c) in charge of analyzing the RED-GREEN-BLUE (RGB) components of the video and performing the transcoding tasks. The system has been tested with different videos and the results of Quality of Service (QoS) and Quality of Experience (QoE) shows that H264 is a good option when the predominant color of videos are black or white while XVID is one the codecs that offer interesting results when colors as red, green or blue are predominant in the video., This work has been supported by the Programa para la Formación de Personal Investigador (FPI-2015-S2-884) by the Universitat Politecnica de Valencia . The research leading to these results has received funding from la Caixa Foundation and Triptolemos Foundation
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Study of Multimedia Delivery over Software Defined Networks

  • Jimenez, Jose M.|||0000-0002-3688-7235
  • Romero Martínez, José Oscar|||0000-0003-4081-9005
  • Lloret, Jaime|||0000-0002-0862-0533
  • Rego, Albert
  • Dilendra, Avinash
[EN] Software Defined Networks (SDN) have become a new way to make dynamic topologies. They have great potential in both the creation and development of new network protocols and the inclusion of distributed artificial intelligence in the network. There are few emulators, like Mininet, that allow emulating a SDN in a single personal computer, but there is lack of works showing its performance and how it performs compared with real cases. This paper shows a performance comparison between Mininet and a real network when multimedia streams are being delivered. We are going to compare them in terms of consumed bandwidth (throughput), delay and jitter. Our study shows that there are some important differences when these parameters are compared. We hope that this research will be the basis to show the difference with real deployments when Mininet is used., This work has been supported by the “Ministerio de Economía y Competitividad”, through the “Convocatoria 2014. Proyectos I+D - Programa Estatal de Investigación Científica y Técnica de Excelencia” in the “Subprograma Estatal de Generación de Conocimiento”, project TIN2014-57991-C3-1-P and the “programa para la Formación de Personal Investigador – (FPI-2015-S2-884)” by the“Universitat Politècnica de València”.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Design and deployment of a smart system for data gathering in aquaculture tanks using wireless sensor networks

  • Parra-Boronat, Lorena
  • Rodrigues, Joel José Puga Coelho
  • Sendra, Sandra|||0000-0001-9556-9088
  • Lloret, Jaime|||0000-0002-0862-0533
[EN] The design of monitoring systems for marine areas has increased in the last years. One of the many advantages of wireless sensor networks is the quick process in data acquisition. The information from sensors can be processed, stored, and transmitted using protocols efficiently designed to energy saving and establishing the fastest routes. The processing and storing of data can be very useful for taking intelligent decisions for improving the water quality. The monitoring of water exchange in aquaculture tanks is very important to monitor the fish welfare. Thus, this paper presents the design, deployment, and test of a smart data gathering system for monitoring several parameters in aquaculture tanks using a wireless sensor network. The system based on a server is able to request and collect data from several nodes and store them in a database. This information can be postprocessed to take efficient decisions. The paper also presents the design of a conductivity sensor and a level sensor. These sensors are installed in several aquaculture tanks. The system was implemented using Flyport modules. Finally, the data gathering system was tested in terms of consumed bandwidth and the delay Transmission Control Protocol (TCP) packets delivering data from the sensors., This work has been partially supported by the Postdoctoral Scholarship “Contratos Postdoctorales UPV 2014 (PAID‐ 10‐14)” of the “Universitat Politècnica de València,” by the “Programa para la Formación de Personal Investigador— (FPI‐2015‐S2‐884)” of the “Universitat Politècnica de València,” and by the pre‐doctoral student grant “Ayudas para contratos predoctorales de Formación del Profesorado Universitario FPU (Convocatoria 2014)” Reference: FPU14/ 02953 by the “Ministerio de Educación, Cultura y Deporte,” by Instituto de Telecomunicações, Next Generation Networks and Applications Group (NetGNA), and Covilhã Delegation, by the National Funding from the FCT—Fundação para a Ciência e a Tecnologia through the UID/EEA/500008/2013 Project, by the Government of Russian Federation, Grant 074‐U01, and by Finep, with resources from Funttel, Grant No. 01.14.0231.00, under the Radiocommunication Reference Center (Centro de Referência em Radiocomunicações —CRR) project of the National Institute of Telecommunications (Instituto Nacional de Telecomunicações—Inatel), Brazil.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Energy Efficiency in Cooperative Wireless Sensor Networks

  • Sendra, Sandra|||0000-0001-9556-9088
  • Lloret, Jaime|||0000-0002-0862-0533
  • Jimenez, Jose M.|||0000-0002-3688-7235
  • Lacuesta, Raquel
[EN] The transport of sensitive products is very important because their deterioration may cause the value lost and even the product rejection by the buyer. In addition, it is important to choose the optimal way to achieve this end. In a data network, the task of calculating the best routes is performed by routers. We can consider the optimal path as the one that provides a shortest route. However, if a real transport network is considered the shortest path can sometimes be affected by incidents and traffic jams that would make it inadvisable. On the other hand, when we need to come back, due to features that symmetry provides, it would be interesting to follow the same path in reverse sense. For this reason, in this paper we present a symmetric routing mechanism for cooperative monitoring system for the delivery of fresh products. The systems is based on a combination of fixed nodes and a mobile node that stores the path followed to be able of coming back following the same route in reverse sense. If this path is no longer available, the system will try to maintain the symmetry principle searching the route that provide the shortest time to the used in the initial trip. The paper shows the algorithm used by the systems to calculate the symmetric routes. Finally, the system is tested in a real scenario which combines different kind of roads. As the results shows, the energy consumption of this kind of nodes is highly influenced by the activity of sensors., This work has been supported by the "Ministerio de Economia y Competitividad", through the "Convocatoria 2014. Proyectos I+D -Programa Estatal de Investigacion Cientifica y Tecnica de Excelencia" in the "Subprograma Estatal de Generacion de Conocimiento", (project TIN2014-57991-C3-1- P) and the "programa para la Formacion de Personal Investigador - (FPI-2015-S2-884)" by the "Universitat Politecnica de Valencia".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Energy Savings Consumption on Public Wireless Networks by SDN Management

  • Jimenez, Jose M.|||0000-0002-3688-7235
  • Romero Martínez, José Oscar|||0000-0003-4081-9005
  • Lloret, Jaime|||0000-0002-0862-0533
  • Díaz Santos, Juan Ramón
[EN] In order to use the energy more efficiently, network algorithms and protocols must incorporate in their decision mechanisms some functions focused on saving energy. In this paper we have studied different features and parameters of wireless networks to establish their relationship with the power consumption. First, we have analyzed the variation of power consumption of access points (APs) in function of the antenna transmission power. Second, we have collected user information from real public wireless network to determine the real requirements of network resources in real time basis. Based on this information, a new extension for Openflow protocol over Software-Defined Networking (SDN) networks will be proposed to manage the wireless network, with the aim to keep the optimal network performance with minimal power consumption. This extension introduces new Openflow messages and a new function to be incorporated in SDN controllers and Openflow enabled devices. The proposal will be validated by appropriated simulations based on real scenarios: a shopping center and a municipal wireless network., This work has been supported by the Ministerio de Economía y Competitividad , through the Convocatoria 2014. Proyectos I + D - Programa Estatal de Investigación Científica y Técnica de Excelencia in the Subprograma Estatal de Generación de Conocimiento , Project TIN2014-57991-C3-1-P and the Programa para la Formación de Personal Investigador (FPI-2015-S2-884) by the Universitat Politècnica de València .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Underwater communications for video surveillance systems at 2.4 GHz

  • Sendra, Sandra|||0000-0001-9556-9088
  • Lloret, Jaime|||0000-0002-0862-0533
  • Jimenez, Jose M.|||0000-0002-3688-7235
  • Rodrigues, Joel José Puga Coelho
Video surveillance is needed to control many activities performed in underwater environments. The use of wired media can be a problem since the material specially designed for underwater environments is very expensive. In order to transmit the images and videos wirelessly under water, three main technologies can be used: acoustic waves, which do not provide high bandwidth, optical signals, although the effect of light dispersion in water severely penalizes the transmitted signals and therefore, despite offering high transfer rates, the maximum distance is very small, and electromagnetic (EM) waves, which can provide enough bandwidth for video delivery. In the cases where the distance between transmitter and receiver is short, the use of EM waves would be an interesting option since they provide high enough data transfer rates to transmit videos with high resolution. This paper presents a practical study of the behavior of EM waves at 2.4 GHz in freshwater underwater environments. First, we discuss the minimum requirements of a network to allow video delivery. From these results, we measure the maximum distance between nodes and the round trip time (RTT) value depending on several parameters such as data transfer rate, signal modulations, working frequency, and water temperature. The results are statistically analyzed to determine their relation. Finally, the EM waves behavior is modeled by a set of equations. The results show that there are some combinations of working frequency, modulation, transfer rate and temperature that offer better results than others. Our work shows that short communication distances with high data transfer rates is feasible., This work has been partially supported by the Postdoctoral Scholarship "Contratos Postdoctorales UPV 2014 (PAID-10-14)" of the "Universitat Politecnica de Valencia", by the "Programa para la Formacion de Personal Investigador (FPI-2015-52-884)" of the "Universitat Politecnica de Valencia", by Instituto de Telecomunicacoes, Next Generation Networks and Applications Group (NetGNA), Covilha Delegation, by the National Funding from the FCT-Fundacao para a Ciencia e a Tecnologia through the UID/EEA/500008/2013 Project, by the Government of Russian Federation, Grant 074-U01, and by Finep, with resources from Funttel, Grant No. 01.14.0231.00, under the Radiocommunication Reference Center (Centro de Referencia em Radiocomunicacoes-CRR) project of the National Institute of Telecommunications (Instituto Nacional de Telecomunicacoes-Inatel), Brazil.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Intensification of heat transfer during mild thermal treatment of dry-cured ham by using airborne ultrasound

  • Contreras-Ruiz, Marina|||0000-0002-5107-5702
  • Benedito Fort, José Javier|||0000-0003-0163-4593
  • Bon Corbín, José|||0000-0002-0457-9705
  • Garcia-Perez, J.V.|||0000-0002-9993-4246
[EN] The application of power ultrasound (PuS) could be used as a novel technology with which to intensify thermal treatments using hot air. Mild thermal treatments have been applied to improve the soft texture of dry-cured ham caused by defective processing. In this regard, the aim of this study was to assess the kinetic intensification linked to the application of airborne PuS in the mild thermal treatment using hot air of dry-cured ham. For this purpose, vacuum packed cylindrical samples (2.52±0.11cm in diameter and 1.90±0.14cm in height) of dry-cured ham were heated using hot air at different temperatures (40, 45, 50°C) and air velocities (1, 2, 3, 4, 6m/s) with (22.3kHz, 50W) and without PuS application. Heat transfer was analyzed by considering that it was entirely controlled by conduction and the apparent thermal diffusivity was identified by fitting the model to the heating kinetics. The obtained results revealed that PuS application sped up the heat transfer, showing an increase in the apparent thermal diffusivity (up to 37%). The improvement in the apparent thermal diffusivity produced by PuS application was greater at high temperatures (50°C) but negligible at high air velocities (6m/s). Heating caused an increase in the hardness and elasticity of dry-cured ham, which would correct ham pastiness defects, while the influence of PuS on such textural parameters was negligible., The authors acknowledge financial support from the "Spanish Ministerio de Economia y Competitividad (MINECO), the Institute Nacional de Investigacion y Tecnologia Agraria y Alimentaria (INIA)" in Spain, the European Regional Development Fund (ERDF 2014-2020) (Project RTA2013-00030-C03-02) and the PhD grant of M. Contreras from the Universitat Politecnica de Valencia (Ref 2447 FPI-Programe 1-2015).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Intelligent Algorithm for Enhancing MPEG-DASH QoE in eMBMS

  • Abdullah, Miran Taha
  • Jimenez, Jose M.|||0000-0002-3688-7235
  • Canovas Solbes, Alejandro|||0000-0002-0422-0161
  • Lloret, Jaime|||0000-0002-0862-0533
[EN] Multimedia streaming is the most demanding and bandwidth hungry application in today¿s world of Internet. MPEG-DASH as a video technology standard is designed for delivering live or on-demand streams in Internet to deliver best quality content with the fewest dropouts and least possible buffering. Hybrid architecture of DASH and eMBMS has attracted a great attention from the telecommunication industry and multimedia services. It is deployed in response to the immense demand in multimedia traffic. However, handover and limited available resources of the system affected on dropping segments of the adaptive video streaming in eMBMS and it creates an adverse impact on Quality of Experience (QoE), which is creating trouble for service providers and network providers towards delivering the service. In this paper, we derive a case study in eMBMS to approach to provide test measures evaluating MPEG-DASH QoE, by defining the metrics are influenced on QoE in eMBMS such as bandwidth and packet loss then we observe the objective metrics like stalling (number, duration and place), buffer length and accumulative video time. Moreover, we build a smart algorithm to predict rate of segments are lost in multicast adaptive video streaming. The algorithm deploys an estimation decision regards how to recover the lost segments. According to the obtained results based on our proposal algorithm, rate of lost segments is highly decreased by comparing to the traditional approach of MPEG-DASH multicast and unicast for high number of users., This work has been partially supported by the Postdoctoral Scholarship Contratos Postdoctorales UPV 2014 (PAID-10-14) of the Universitat Politècnica de València , by the Programa para la Formación de Personal Investigador (FPI-2015-S2-884) of the Universitat Politècnica de València , by the Ministerio de Economía y Competitividad , through the Convocatoria 2014. Proyectos I+D - Programa Estatal de Investigación Científica y Técnica de Excelencia in the Subprograma Estatal de Generación de Conocimiento , project TIN2014-57991-C3-1-P and through the Convocatoria 2017 - Proyectos I+D+I - Programa Estatal de Investigación, Desarrollo e Innovación, convocatoria excelencia (Project TIN2017-84802-C2-1-P).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Magnetism of Ir5+ - based double perovskites: Unraveling its nature and the influence of structure

  • Laguna-Marco, MA
  • Arias-Egido, E
  • Piquer, C
  • Cuartero, V
  • Hernandez-Lopez, L
  • Kayser, P
  • Alonso, JA
  • Barker, JAT
  • Fabbris, G
  • Escanhoela, CA
  • Irifune, T
A combination of x-ray-diffraction, x-ray absorption, x-ray magnetic circular dichroism, macroscopic magnetization, and muon-spin relaxation measurements is used to investigate the interplay between structure (both crystallography and microstructure) and magnetism in Sr-2 YIrO6 as a function of both chemical (Ca-doping) and physical (hydrostatic) pressure. X-ray absorption spectroscopy clearly shows that the physical pressure is more effective in modifying the structure. On the other hand, the dichroic measurements evidence a constant magnetic signal with physical pressure and strong differences with Ca-doping. Muon-spin relaxation reveals the presence of magnetic order, even when this is hidden in the magnetization data. From the combined analysis, the magnetic results are explained in terms of the presence of Ir6+ or Ir4+ ions in magnetic clusters, most likely located at and triggered by antisite disorder. The measurements under high physical pressure indicate that the magnetic state is independent of the crystallographic details such as Ir-O distances and Ir-O-Y angles.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Toward the Optimized Spintronic Response of Sn-Doped IrO2 Thin Films

  • Arias-Egido, E.
  • Laguna-Marco, M.A.
  • Piquer, C.
  • Boada, R.
  • Díaz-Moreno, S.
Amorphous and polycrystalline Sn-doped IrO2 thin films, Ir1- xSnxO2, are grown for the first time. Their electrical response and strength of the spin–orbit coupling are studied in order to better understand and tailor its performance as spin current detector material. These experiments prove that the resistivity of IrO2 can be tuned over several orders of magnitude by controlling the doping content in both the amorphous and the polycrystalline state. In addition, growing amorphous samples increase the resistivity, thus improving the spin current to charge current conversion. As far as the spin–orbit coupling is concerned, the system not only remains in a strong spin–orbit coupling regime but it seems to undergo a slight enhancement in the amorphous state as well as in the Sn-doped samples.