Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 73
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Design and assessment of a concentrating solar thermal system for industrial process heat with a copper slag packed-bed thermal energy storage

  • David-Hernandez, Marco Antonio
  • Cazorla-Marín, Antonio|||0000-0003-3314-0395
  • Calderon-Vásquez, Ignacio
  • Battisti, Felipe G.
  • Cardemil, José M.
[EN] Decarbonising the industrial sector is a key part of climate change mitigation targets, and Solar Heat for Industrial Process (SHIP) is a promising technology to achieve this. However, one of the drawbacks of SHIP systems is that they rely on an intermittent energy source. Therefore, sensible energy storage has emerged as a potential solution. In addition, solid byproducts have been proposed as a low-cost but effective material for thermal energy storage (TES). This work presents a SHIP system model coupled with a copper slag-packed-bed TES (PBTES) model using air as heat transfer fluid. The TES has been implemented to preheat the makeup water of the tank where steam is generated. A system design was carried out using a parametric analysis to find a solar field size and a corresponding TES volume. The resulting system was simulated, and the operating variables were analysed in detail. The results show that it is possible to generate 20% more energy due to the storage system. Additionally, a techno-economic analysis indicates that the SHIP with PBTES system results in a payback period of 14 years and a savings of CO2 emissions of 30 t CO2., This work was partially supported by the Research and Development Aid Program (PAID-01-20) of the Universitat Politecnica de Valencia for receiving the Research Fellowship FPI-UPV.2020, as well as the "Programa de Movilidad para estudiantes de doctorado" of the Universitat Politecnica de Valencia. This publication has also been partially supported by the project "DECARBONIZACION DE EDIFICIOS E INDUS-TRIAS CON SISTEMAS HI BRIDOS DE BOMBA DE CALOR", founded by the Spanish "Ministerio de Ciencia e Innovacion (MICIN) " with code number PID2020-115665RB-I00, as well as the R & D project Solar-Steam4IND (TED2021-130614 A -I00) , funded by MICIN/AEI/10.130 39/501100011033 and by the European Union NextGeneration EU/PRTR 2021 call. F. G. Battisti acknowledges the funding from ANID/CONICYT through FONDECYT Postdoctorado 2022 #3220792. J. M. Cardemil and F. G. Battisti acknowledge the financial support from project ANID/FONDAP/1523A0006 "Solar Energy Research Center (SERC) Chile".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Functionalization of polyethylene with hydrolytically-stable ester groups

  • Hervàs-Arnandis, Susi
  • Oliver-Meseguer, Judit|||0000-0003-1555-3583
  • Leyva Perez, Antonio|||0000-0003-1063-5811
  • Palomar-De Lucas, Brenda
  • Bilanin-Artigado, Cristina
  • Mingueza-Verdejo, Paloma
  • Viciano, Mónica
[EN] Low-density (LD) and high-density polyethylene (HDPE), recycled or not, incorporates up to 7 wt% of ester groups after reacting either with ethyl diazoacetate (EDA) under catalytic and solvent free-reaction conditions, or with maleic anhydride (MA) and acrylates (AC) under catalytic radical conditions. The resulting upcycled polyethylene esters are hydrolytically stable at extreme pH (0-14) and can be further transformed into carboxylic acids, carboxylates, other esters and amides., Financial support by the projects PID2020-115100GB-I00 and TED2021-130465B-I00 (funded by Spanish MCIINN, MCIN/AEI/10.13039/501100011033MICIIN) is acknowledged. The work has also been funded by Generalitat Valenciana, Grupos Emergentes (GV/2021/138). AIMPLAS author thanks Instituto Valenciano de Competitividad Empresarial (IVACE) the founding from the project IMAMCA/2023/4. AIMPLAS and ITQ authors thank Agencia Valenciana d'Innovacio (AVI) and the European Union the founding of the project INNEST/2022/18. J. O.-M. acknowledges the Juan de la Cierva program for the concession of a contract (IJC2018-036514-I). S. H.-A, and C. B. and P. M.-V. thank ITQ, UPV-CSIC for the concession of a contract (FPI-2022-S2-42040 and PAID 01-20, respectively).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A General Optimal Iterative Scheme with Arbitrary Order of Convergence

  • Cordero Barbero, Alicia|||0000-0002-7462-9173
  • Torregrosa Sánchez, Juan Ramón|||0000-0002-9893-0761
  • Triguero-Navarro, Paula|||0000-0002-7319-9992
[EN] A general optimal iterative method, for approximating the solution of nonlinear equations, of (n+1) steps with 2(n+1) order of convergence is presented. Cases n=0 and n=1 correspond to Newton's and Ostrowski's schemes, respectively. The basins of attraction of the proposed schemes on different test functions are analyzed and compared with the corresponding to other known methods. The dynamical planes showing the different symmetries of the basins of attraction of new and known methods are presented. The performance of different methods on some test functions is shown., This research was partially supported by PGC2018-095896-B-C22 (MCIU/AEI/FEDER, UE).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Treatment of Dyspareunia with Botulinum Neurotoxin Type A: Clinical Improvement and Influence of Patients&apos, Characteristics

  • Tarazona-Motes, Marta
  • Albaladejo-Belmonte, Mónica
  • Nohales-Alfonso, Francisco J.
  • De-Arriba, Maria
  • Alberola-Rubio, Jose
  • Garcia-Casado, Javier|||0000-0003-1410-2721
[EN] The treatment of chronic pelvic pain (CPP) with botulinum neurotoxin type A (BoNT/A) has increased lately, but more studies assessing its effect are needed. This study aimed to evaluate the evolution of patients after BoNT/A infiltration and identify potential responders to treatment. Twenty-four women with CPP associated with dyspareunia were treated with 90 units of BoNT/A injected into their pelvic floor muscle (PFM). Clinical status and PFM activity were monitored in a previous visit (PV) and 12 and 24 weeks after the infiltration (W12, W24) by validated clinical questionnaires and surface electromyography (sEMG). The influence of patients' characteristics on the reduction in pain at W12 and W24 was also assessed. After treatment, pain scores and the impact of symptoms on quality of life dropped significantly, sexual function improved and sEMG signal amplitude decreased on both sides of the PFM with no adverse events. Headaches and bilateral pelvic pain were risk factors for a smaller pain improvement at W24, while lower back pain was a protective factor. Apart from reporting a significant clinical improvement of patients with CPP associated with dyspareunia after BoNT/A infiltration, this study shows that clinical characteristics should be analyzed in detail to identify potential responders to treatment., This study was funded by Universitat Politecnica de Valencia in Programa de Ayudas de Investigacion y Desarrollo (PAID-01-20), ISCIII, MCIU, VLC Campus in Convocatoria Ayudas: UPV-La Fe (INBIO): 2016 SPEHG (ID:C18), 2019 sEMG_BONTAv (ID:C06) and funds from private contracts with Merz Pharmaceuticals GmbH S.L.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Jacobian-Free Vectorial Iterative Scheme to Find Simple Several Solutions Simultaneously

  • Cordero Barbero, Alicia|||0000-0002-7462-9173
  • Torregrosa Sánchez, Juan Ramón|||0000-0002-9893-0761
  • Triguero-Navarro, Paula|||0000-0002-7319-9992
[EN] This manuscript is devoted to a derivative-free parametric iterative step to obtain roots simultaneously for both nonlinear systems and equations. We prove that when it is added to an arbitrary scheme, it doubles the convergence order of the original procedure and defines a new algorithm that obtains several solutions simultaneously. Different numerical experiments are carried out to check the behavior of the iterative methods by changing the value of the parameter and the initial guesses. Also, it performs a numerical example where the dynamical planes are carried out to see and compare the basins of attraction., This research was partially supported by Centro Universitario EDEM - Escuela de Empresarios, Valencia, Spain and by Universitat Politécnica de Valéncia Contrato Predoctoral PAID-01-20-17 (UPV).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

An iterative scheme to obtain multiple solutions simultaneously

  • Cordero Barbero, Alicia|||0000-0002-7462-9173
  • Garrido-Saez, Neus|||0000-0002-7903-8591
  • Torregrosa Sánchez, Juan Ramón|||0000-0002-9893-0761
  • Triguero-Navarro, Paula|||0000-0002-7319-9992
[EN] In this manuscript, we propose an iterative step that, combined with any other method, allows us to obtain an iterative scheme for approximating the simple roots of a polynomial simultaneously. We show that adding this step, the order of convergence of the new scheme is tripled respect to the original one. With this idea, we also present an iterative method that obtains multiple solutions of any nonlinear equation simultaneously, without the need to know the multiplicity of the solutions. We conclude with several numerical experiments to confirm the behaviour of the proposed methods.& COPY; 2023 The Authors. Published by Elsevier Ltd. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/)., This research was partially supported by Universitat Politecnica de Valencia Contrato Predoctoral PAID-01-20-17 (UPV), Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Flexible All-Optical Remote Frequency Conversion of 5G Signals to FR1 and FR2 Bands Employing an Optical Comb and Multi-Core Fiber for Next-Generation C-RAN Fronthaul

  • Fito-Estevan, Vicente
  • Maria Morant|||0000-0001-5565-7788
  • Roberto Llorente|||0000-0003-4799-2564
[EN] The rapid deployment of 5G wireless networks demands efficient, high performance, dynamically reconfigurable solutions for seamless multi-band frequency conversion and connectivity provision. Efficient centralized radio access networks (C-RAN) can benefit from an all-optical signal conversion and remoting employing optical frequency combs and multicore fiber (MCF) as optical source and transmission media respectively. This paper proposes and evaluates experimentally an all-optical frequency conversion approach based on an optical frequency comb (OFC) generated using a dualdrive Mach-Zehnder modulator (DD-MZM) and transmitted through MCF. The proposed method enables seamless frequency up- and down-conversion across sub-6 GHz and millimeter-wave (mm-wave) bands, leveraging optical heterodyning to achieve low-distortion signal transmission in next-generation C-RAN fronthaul implementations. The performance of the system is evaluated in terms of signal-to-noise ratio (SNR) and error vector magnitude (EVM) of the frequency-converted 5G signals. The results demonstrate that frequency-converted replicas exhibit minimal EVM degradation, with values consistently below 10.5%, ensuring compliance with 3GPP 5G NR standards. Additionally, we analyze how the modulation order affects the 5G performance, finding that lower-order orthogonal frequency division multiplexing (OFDM) schemes (e.g., QPSK) maintain robust performance at lower SNRs, while higher-order OFDM schemes (e.g., 64QAM and 256QAM) require higher SNRs for satisfactory performance meeting 3GPP threshold recommendations. Furthermore, we explore the role of multiple modulated optical carriers over the MCF media, showing that increasing the number of modulated carriers improves SNR and reduces the fluctuation of the received EVM. The EVM fluctuation is measured for different configurations, using one or two modulated optical carriers. The maximum access network reach is calculated by measuring the power margin available using the same receiver. Considering the propagation losses and expected crosstalk-induced SNR penalty of a 7-core MCF, a 23.6 km extension could be reached when using two modulated carriers for optical heterodyning compared with a single modulated carrier without frequency conversion. Finally, the impact of power balance of the optical carriers used for optical heterodyning is also evaluated in terms of EVM and SNR of the original and upconverted signals. These findings highlight the potential of MCF networks using an OFC for the transmission of 5G signals as a scalable solution for next-generation C-RAN supporting agile reconfiguration in multiple frequency bands., This work was supported in part by Spanish Ministry of Science and Innovation (MCIN) funded by MCIN/AEI/10.13039/501100011033 and by the European Union FEDER/UE under Project iPHOEBE PID2023-152410OB-I00. The work of Vicente Fito supported by the Universitat Politecnica de Valencia under Grant PAID-01-20 UPV. Funding for open access charge: Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Multiplexed vortex beam-based optical tweezers generated with spiral phase mask

  • Muñoz-Pérez, Francisco Misael
  • Furlan, Walter Daniel
  • Ferrando, Vicente|||0000-0002-7434-7109
  • Castro-Palacio, Juan Carlos|||0000-0002-0132-9989
  • Arias-Gonzalez, J. R.|||0000-0001-6802-0874
  • Monsoriu Serra, Juan Antonio|||0000-0003-3350-7951
[EN] The design and implementation of a multiplexed spiral phase mask in an experimental optical tweezers setup are presented. This diffractive optical element allows the generation of multiple concentric vortex beams with independent topological charges and without amplitude modulation. The generalization of the phase mask for multiple concentric vortices is also shown. The design for a phase mask of two multiplexed vortices with different topological charges is developed. We experimentally show the transfer of angular momentum to the optically trapped microparticles by enabling nearly independent orbiting dynamics around the optical axis within each vortex. The angular velocity of the confined particles versus the optical power in the focal region is also discussed for different combinations of topological charges., This work was supported by the Spanish Ministerio de Ciencia e Innovación (grant PID2019-107391RB-I00 and PID2022-142407NB-I00) and by Generalitat Valenciana (grant CIPROM/2022/30), Spain. F.M.M.P also acknowledgment the financial support from the Universitat Politècnica de València (PAID-01-20-25), Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

In-Network Quantum Computing for Future 6G Networks

  • Urgelles-Pérez, Helen
  • Monserrat del Río, Jose Francisco|||0000-0001-8664-6408
  • Maheshwari, Shivam
  • Nande, Swaraj Shekhar
  • Bassoli, Riccardo
  • Fitzek, Frank H.P.
[EN] In light of the imperative for expeditious data processing and enhanced global connectivity, the domain of communication technology is experiencing a rapid progression from the Fifth Generation (5G) to the forthcoming sixth generation (6G) within the research community. Furthermore, 6G promises to significantly augment the synergy between the human, digital, and physical realms, thereby necessitating the formulation of novel Key Performance Indicators (KPIs) as well as Key Values Indicators (KVIs), and the assimilation of commensurate technologies. Among these technologies, quantum computing is evolving rapidly due to its inherent advantages from quantum mechanics. Nevertheless, scant attention is directed toward a comprehensive exploration of the consequences attendant to its present-day application. The principal objective of this article resides in its endeavor to underscore, from a compensatory perspective, the convergence of 6G and quantum computing while concurrently considering the Sustainable Development Goals and its KVIs., The authors acknowledge the financial support by the Federal Ministry of Education and Research of Germany in the programme of "Souveran. Digital. Vernetzt.". Joint project 6G-life, project identification number: 16KISK001K. CeTI: Funded by the German Research Foundation (DFG, Deutsche Forschungsgemeinschaft) as part of Germany's Excellence Strategy -EXC 2050/1 -Project ID 390696704 -Cluster of Excellence "Centre for Tactile Internet with Human-in-the-Loop" (CeTI) of Technische Universitat Dresden. UPV: The research was founded by the Research and Development Grants Program (PAID-01-20) of the Universitat Politecnica de Valencia. The research stay of the author at Technische Universitat Dresden (Germany) was founded by the Program of Grants for student mobility of doctoral students at the Universitat Politecnica de Valencia in 2022 from Spain, and by Erasmus+ Student Mobility for Traineeship 2023. Open access funding enabled and organized by Projekt DEAL.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Memory in the iterative processes for nonlinear problems

  • Cordero Barbero, Alicia|||0000-0002-7462-9173
  • Garrido-Saez, Neus|||0000-0002-7903-8591
  • Torregrosa Sánchez, Juan Ramón|||0000-0002-9893-0761
  • Triguero-Navarro, Paula|||0000-0002-7319-9992
[EN] In this paper, we study different ways for introducing memory to a parametric family of optimal two-step iterative methods. We study the convergence and the stability, by means of real dynamics, of the methods obtained by introducing memory in order to compare them. We also perform several numerical experiments to see how the methods behave., This research was partially supported by Grant PGC2018-095896-B-C22 funded by MCIN/AEI/10.13039/5011000113033 by ERDF A way of making Europe,"European Union; this research was partially supported by PAID-01-20-17 (Universitat Politecnica de Valencia).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Characterization of Pelvic Floor Activity in Healthy Subjects and with Chronic Pelvic Pain: Diagnostic Potential of Surface Electromyography

  • Albaladejo-Belmonte, Mónica
  • Tarazona-Motes, Marta
  • Nohales-Alfonso, Francisco J.
  • De-Arriba, Maria
  • Alberola-Rubio, Jose
  • Garcia-Casado, Javier|||0000-0003-1410-2721
[EN] Chronic pelvic pain (CPP) is a highly disabling disorder in women usually associated with hypertonic dysfunction of the pelvic floor musculature (PFM). The literature on the subject is not conclusive about the diagnostic potential of surface electromyography (sEMG), which could be due to poor signal characterization. In this study, we characterized the PFM activity of three groups of 24 subjects each: CPP patients with deep dyspareunia associated with a myofascial syndrome (CPP group), healthy women over 35 and/or parous (>35/P group, i.e., CPP counterparts) and under 35 and nulliparous (<35&NP). sEMG signals of the right and left PFM were recorded during contractions and relaxations. The signals were characterized by their root mean square (RMS), median frequency (MDF), Dimitrov index (DI), sample entropy (SampEn), and cross-correlation (CC). The PFM activity showed a higher power (>RMS), a predominance of low-frequency components (DI), greater complexity (>SampEn) and lower synchronization on the same side (35/P group. The same trend in differences was found between healthy women (35/P) associated with aging and parity. These results show that sEMG can reveal alterations in PFM electrophysiology and provide clinicians with objective information for CPP diagnosis., This study was funded by Universitat Politecnica de Valencia in Programa de Ayudas de Investigacion y Desarrollo (PAID-01-20), ISCIII, MCIU, VLC Campus in Convocatoria Ayudas: UPV-La Fe (INBIO): 2016 SPEHG (ID:C18), 2019 sEMG_BONTAv (ID:C06) and funds from private contracts with Merz Pharmaceuticals GmbH S.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Analysis of the Evolution of Sea Water Quality in the Spanish Coast from Satellite Images before and during a Confinement Period

  • Parra-Boronat, Mar
  • Parra, Lorena
  • Jimenez, Jose M.|||0000-0002-3688-7235
  • Lloret, Jaime|||0000-0002-0862-0533
[EN] Satellite imaging, a form of remote sensing, can be used to analyse water quality, which must be monitored for proper and sustainable environmental management. This paper studies the effect of a sea traffic reduction in the Alboran Sea (Spain), analysing the changes in water quality before (from February 3rd, 2020) and during (until June 22nd, 2020) a confinement period. This was an unprecedented event in modern times and brought an interesting opportunity to study dynamics when the human impact is reduced. The study of these dynamics and the concentration levels with little human effect is important for environmental conservation purposes. We applied already existing indices using ArcGIS and ACOLITE to determine the following environmental parameters: colored dissolved organic matter (CDOM), suspended particulate matter (SPM), chlorophyll-a (Chl-a), and harmful algal blooms (HABs). Prequarantine concentration levels can reach up to 4 a(CDOM)440 (CDOM), 18 g/m(3) (SPM), and 100 mu g/L (Chl-a). Most prequarantine days presented an increment in either concentration level or distribution from the day before. The effects a sudden human impact has on an ecosystem which experimented reduced human influence for months were shown. On the day before the said impact (June 12th), three of the parameters were barely detected with concentration levels of mostly 2 a(CDOM)440 (CDOM), 6 g/m(3) (SPM), and 25 mu g/L (Chl-a), and sparse distribution. Afterwards (June 22nd), their levels went up to 4 a(CDOM)440 (CDOM), 14 g/m(3) (SPM), and 1000 mu g/L (Chl-a) and were distributed near the ports. The results presented in this study show that the main drivers of change when human impact was reduced were climatologic events (such as storms). Nevertheless, the importance of the human facto can be seen through the CDOM, SPM, and Chl-a plume near port areas observed the day after port activity was reactivated, June 22nd., This research was funded by the European Union through the ERANETMED (Euromediterranean Cooperation through ERANET joint activities and beyond) project ERANETMED3-227 SMARTWATIR; by Conselleria de Educacion, Cultura y Deporte with the Subvenciones para la contratacion de personal investigador en fase postdoctoral, grant number APOSTD/2019/04; and by Universitat Politecnica de Valencia through Program PAID-01-20 and PAID-10-20.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A quantitative autonomous bioluminescence reporter system with a wide dynamic range for Plant Synthetic Biology

  • Calvache-Román, Camilo Alberto
  • Vázquez-Vilar, Marta
  • Moreno-Giménez, Elena
  • Orzáez Calatayud, Diego Vicente
[EN] Plant Synthetic Biology aims to enhance the capacities of plants by designing and integrating synthetic gene circuits (SGCs). Quantitative reporting solutions that can produce quick, rich datasets affordably are necessary for SGC optimization. In this paper, we present a new, low-cost, and high-throughput reporter system for the quantitative measurement of gene expression in plants based on autonomous bioluminescence. This method eliminates the need for an exogenous supply of luciferase substrate by exploiting the entire Neonothopanus nambi fungal bioluminescence cyclic pathway to build a self-sustained reporter. The HispS gene, the pathway's limiting step, was set up as the reporter's transcriptional entry point as part of the new system's design, which significantly improved the output's dynamic range and brought it on par with that of the gold standard FLuc/RLuc reporter. Additionally, transient ratiometric measurements in N. benthamiana were made possible by the addition of an enhanced GFP as a normalizer. The performance of new NeoLuc/eGFP system was extensively validated with SGCs previously described, including phytohormone and optogenetic sensors. Furthermore, we employed NeoLuc/eGFP in the optimization of challenging SGCs, including new configurations for an agrochemical (copper) switch, a new blue optogenetic sensor, and a dual copper/red-light switch for tight regulation of metabolic pathways., The authors would like to thank Matias Zurbriggen for sharing the plasmids of the red-light system and Jorge Lozano-Juste for sharing the plasmid with the MAPKKK18 promoter. The authors also would like to thank Alberto Conejero for his assistance with data analysis.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Enhanced monitoring and dynamics analysis of a concentrated solar thermal experimental plant for steam production

  • David-Hernandez, Marco Antonio
  • Cazorla-Marín, Antonio|||0000-0003-3314-0395
  • Gonzálvez-Maciá, José|||0000-0001-9422-7756
  • Payá-Herrero, Jorge|||0000-0003-2663-3191
  • Frasquet, Miguel
[EN] Solar heat for industrial processes (SHIP) is an increasingly interest option as a key strategy to decarbonise the industrial sector. Linear Fresnel Collectors are a promising technology due to their cost-effectiveness and efficiency. As part of the SOLPINVAP project, an experimental facility was constructed to prove the use of modular Linear Fresnel collectors for steam production in industrial processes. SHIP plants commonly use standard industrial sensors, which can result in high uncertainty when measuring absorbed and produced heat. This can be problematic when selling energy to customers through an energy purchase agreement. To address this issue, an uncertainty analysis was conducted in the experimental plant, and more precise instrumentation was added to the installation. This reduced the uncertainty in the absorbed energy in the solar field from 12% to 3% and obtaining an uncertainty of 3% in the generated energy. Additionally, the operation of the plant was studied through experimental tests conducted during the summer of 2022, and the system dynamics were analysed during the period of peak heat absorption., The authors gratefully acknowledge the company Solatom CSP, for the information and operational data from the SHIP facility, and for the technical support, specially to Juan Martinez and Carlo Terruzzi. This work was partially supported by the Research and Development Aid Program (PAID-01-20) of the Universitat Politecnica de Valencia for receiving the Research Fellowship FPI-UPV-2020. This publication hasbeen carried out in the framework of the project "DECARBONIZACION DE EDIFICIOS E INDUSTRIAS CON SISTEMAS HIBRIDOS DE BOMBA DE CALOR", founded by the Spanish "Ministerio de Ciencia e Innovacion (MICIN) " with code number PID2020-115665RB-I00. The project was also partially funded by the R&D project SolarSteam4IND (TED2021-130614A-I00) , funded by MICIN/AEI/10.13039/501100011033/and by the European Union NextGeneration EU/PRTR 2021 call.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Design, establishment, analysis, and quality control of a high-precision reference frame in Cortes de Pallás (Spain)

  • García-Asenjo Villamayor, Luis|||0000-0001-6535-2216
  • Baselga Moreno, Sergio|||0000-0002-0492-4003
  • Martínez, Laura
  • Garrigues, Pascual
  • Luján, Raquel
[EN] A high-precision geodetic reference frame was required in Cortes de Pallas (Spain) to undertake a long-term deformation monitoring project. Involving distances up to 2000 m, the aimed accuracy was 1 mm and 3 mm for horizontal and vertical components, respectively. Such a high precision is necessary to detect possible displacements of selected points on a critical rocky area in a short period of time, i.e., 2 or 3 years, and also to provide ground control for the integration of precise 3D models periodically obtained by remote sensing techniques. Considering the historical geotechnical problems of the area, the possible influence of the hydroelectric power plant, and the peculiar orography of the zone, a proper analysis of the stability is crucial if the reference frame is to be used for rigorous over-time deformation monitoring. This paper describes the deformation monitoring of a 10-pillar geodetic network which was measured from 2018 to 2020 by using a sub-millimetric Mekometer ME5000 (0.2 mm + 0.2 ppm) along with a demanding observing methodology which includes a network of data loggers for temperature, humidity, and air pressure as well as proper calibration of sensors and instruments to prevent potential inconsistencies between the scale of the network and the unit of length of the International System (SI meter). The results demonstrated that the chosen methodology yielded the aimed accuracy. However, using such a high precision methodology entails the problem that small displacements of only 1 or 2 mm are significantly detected as deformations by conventional deformation analysis and then it arises the problem of finding a subset of stable points for a rigorous datum realization when all the points seem to displace. This general problem is analyzed in the particular case of Cortes de Pallas, where a balanced mix of deformation analysis and technical decisions was eventually adopted to define a precise and stable reference frame for rigorous over-time deformation monitoring., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Symmetry in the Multidimensional Dynamical Analysis of Iterative Methods with Memory

  • Cordero Barbero, Alicia|||0000-0002-7462-9173
  • Garrido-Saez, Neus|||0000-0002-7903-8591
  • Torregrosa Sánchez, Juan Ramón|||0000-0002-9893-0761
  • Triguero-Navarro, Paula|||0000-0002-7319-9992
[EN] In this paper, new tools for the dynamical analysis of iterative schemes with memory for solving nonlinear systems of equations are proposed. These tools are in concordance with those of the scalar case and provide interesting results about the symmetry and wideness of the basins of attraction on different iterative procedures with memory existing in the literature., This research was partially supported by Grant PGC2018-095896-B-C22, funded by MCIN/ AEI/10.13039/5011000113033 by ERDF A way of making Europe, European Union; by the internal research project ADMIREN of Universidad Internacional de La Rioja (UNIR); and partially supported by Universitat Politècnica de València Contrato Predoctoral PAID-01-20-17 (UPV).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Additive-Free Commercial Alumina Catalyzes the Halogen Exchange Reaction of Long Alkyl Halides in Batch and in Flow Processes

  • Mingueza-Verdejo, Paloma
  • Hervàs-Arnandis, Susi
  • Oliver-Meseguer, Judit|||0000-0003-1555-3583
  • Leyva Perez, Antonio|||0000-0003-1063-5811
[EN] The synthesis of alkyl halides can be performed by simply halide exchange reactions between two different alkyl halides, catalyzed by aluminosilicates. Here, we show that commercially available alumina shows a superior catalytic activity for the halogen exchange reaction between long alkyl halides (more than 6 carbons), including fluorides, in either batch or flow modes. The catalytic activity of the solid alumina is modulated by alkaline countercations on the surface, and sodium-supported alumina shows the optimal performance for the iodo-bromo and iodo-fluoro exchange under inflow reaction conditions, after >24 h reaction time, without any external additive., P. M.-V. and S. H.-A. thank ITQ, UPV-CSIC for the concession of a contract (PAID 01-20 and FPI-2022-S2-42040, respectively). J. O.-M. thanks the MICINN for the concession of a Ramon y Cajal contract (RYC2022-036154-I).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Can southern Europe lead an urban energy transition? Insights from the Energy Transition Roundtable in Valencia, Spain

  • Escario-Chust, Ana|||0000-0002-8094-9894
  • Peris-Blanes, Jordi|||0000-0002-4818-8626
  • Palau-Salvador, Guillermo|||0000-0003-0492-6567
  • Vogelzang, Fenna
  • Segura-Calero, Sergio
[EN] Multi-stakeholder engagement spaces are important instruments for transition governance. Due to their nature they require acute consciousness of the local context and place they are based in. The research presented in this paper adds to the body of literature on how to govern the energy transition at a local level, and contributes to filling the gap on the role of multi-stakeholder engagement groups in the energy transition process within a southern European context. Empirical evidence is drawn from the city of Valencia, Spain, where innovative formulas are being developed. One such innovation, the Mesa de Transici ¿on Energ ¿etica (MTE ¿ Energy Round Table), emerges as a multi-stakeholder, participatory and inclusive mechanism to define the roadmap towards achieving the energy transition and urban sustainability. This new experience in the city led to the discovery and exploration of the challenges, barriers, benefits and opportunities the city had to face, as well as clarifying how such multi-stakeholder engagement spaces can facilitate the energy transition path. The research evidenced that while participants and organizers were very satisfied with the development of the stakeholder group and the resulting demonstration projects used to enhance experimentation in the city, they signaled various difficulties. Such difficulties were rooted in the context and included dealing with an uneven vision of the transition, the vulnerability of the group due to the predominant role of the local administration, and a perceived lack of action. Nevertheless, the multi-stakeholder engagement space for the energy transition in Valencia can be seen as an important driver of change for the city. It can also be seen as an experimental model to be replicated in other Spanish or southern European cities., This work has received funding from the Research and Development Aid Program (PAID-01-20) from the Universitat Politecnica de Valencia; the Generalitat Valenciana and the European Social Fund through the postdoctoral grant CIAPOS/2021/178; and for open access from CRUE-Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Experimental evidence of the Poisson-like effect for flexural waves in thin metallic plates

  • Sánchez-Dehesa Moreno-Cid, José|||0000-0003-0742-4407
  • Cervera Moreno, Francisco Salvador
  • Broatch, A.|||0000-0001-9991-1039
  • García-Tíscar, Jorge|||0000-0003-4934-4587
  • Gao, Penglin
  • Felgueroso-Rodríguez, Andrés
[EN] This Letter reports the feasibility of a structure specifically designed for the control of flexural waves propagating in thin perforated plates. The structure, here denominated as a redirector device, consists of a square array of free holes that splits the impinging beam and transmits sideways their vibrational energy. This behavior is known as a Poisson-like effect, and it was theoretically described in different acoustic structures. This effect is experimentally demonstrated for flexural waves excited in an aluminum perforated plate, and it is explained in terms of a physical mechanism different to that reported for acoustic waves interacting with thin hollow cylinders embedded in water. In addition, a collimator device based also in free holes is designed and validated with the purpose of providing the beam impinging the redirector device. The measurements indicate that the amount of redirected energy is strongly enhanced when a barrier of two-beam resonators is added at the rear side of the redirector. All the designs are validated by an experimental setup employing 1¿mm thick aluminum plates., This research was partially supported by Grant No. PID2020112759GB-I00 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe." J.S.-D. acknowledges the "Proyecto interno" supported by the Universitat Politècnica de Valencia. A.F. is supported through the Programa de Apoyo para la Investigación y Desarrollo of the Universitat Politècnica de València under Grant Nos. PAID-01-20 and 21589. J.S.-D. and P.G. acknowledge useful conversations with Johan Christensen.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Establishing the EURO5000 reference baseline

  • Wisniewski, Mariusz
  • Lubowicki, Tomasz
  • Wezka, Kinga
  • Szpunar, Ryszard
  • Prochniewicz, Dominik
  • Guillory, Joffray
  • Truong, Daniel
  • Wallerand, Jean-Pierre
  • Garrigues Talens, Pascual
  • Luján, Raquel
  • Baselga Moreno, Sergio|||0000-0002-0492-4003
  • García-Asenjo Villamayor, Luis|||0000-0001-6535-2216
[EN] The EURO5000 geodetic reference baseline, a 5 km precise measurement facility, has been established and validated in the existing Geodynamic Test Field at the Pieniny Klippen Belt in Poland, a site chosen for its confirmed geodynamic stability. Over three years, the Warsaw University of Technology (WUT) determined initial baseline lengths through repeated GNSS and EDM measurement campaigns, establishing a detailed uncertainty budget. The stability of the newly installed points was rigorously monitored, contributing to the overall reliability assessment. Calibrated distances were independently verified by two advanced methods. The determined reference distances were independently confirmed by the Universitat Polite`cnica de Vale`ncia (UPV) using precise GBDM + GNSS methodology and by the Conservatoire National des Arts et Metiers (CNAM) with innovative two-color optical Arpent telemetry measurement ADM system, which effectively mitigates atmospheric refractive index challenges. In all cases, results from these independent methods showed strong consistency with the derived reference values within their declared accuracy ranges. The established EURO5000 baseline now serves as a robust European reference for precise distance measurements up to 5 km, demonstrating a remarkable measurement uncertainty below 1 mm (k = 2). This newly established reference standard offers a valuable resource for calibrating long-distance geodetic instruments, providing a highly accurate benchmark., The project 18SIB01 GeoMetre has received funding from the EMPIR programme co-financed by the Participating States and from the European Union's Horizon 2020 research and innovation programme, funder ID: 10.13039/100014132.The work was created by Mariusz Wisniewski as a result of the implementation of the "Implementation Doctorate" program financed by the Ministry of Education and Science. We would like to thank Dr. Eng. S&#322;awomir Jastrz&#281;bski for organizing and piloting the drone for the purposes of this research. Raquel Lujan acknowledges the funding from the Programa de Ayudas de Investigacion y Desarrollo (PAID-01-20) de la Universitat Polit`ecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Welfare implications on management strategies for rearing dairy calves: A systematic review. Part 2 Social management

  • Carulla-Pascual, Patricia
  • Villagrá, Arantxa
  • Blanco-Penedo, Isabel
  • Estellés, F.|||0000-0001-6774-6075
[EN] Introduction: Raising a healthy calf up to puberty is essential for optimal farm performance. It is therefore, it is necessary to promote animal welfare from the three spheres during this short period. Social management has been postulated as essential in lowering stress and consequently improving calf welfare during this period. Only the health sphere has been studied for a long time, but more recent studies have recently promoted positive experiences and emotional states from affective states or cognitive judgment and natural living spheres. A systematic review of different management strategies in rearing dairy calves according to the three spheres of animal welfare has been conducted using an electronic search strategy. Methods: The analysis and extraction of information from the studies were performed according to a protocol. From 1,783 publications screened, only 351 met the inclusion criteria. Results: The publications identified in the search can be divided into two main groups, feeding and social management, based on the main topic of the publication. This review provides an overview of social management, understood as the calf's interaction with others around it. Discussion: Primary social management issues that emerged were social housing with congeners, separation from the mother and human-animal interaction, distributed in the three broad spheres of animal welfare. The review highlights unresolved questions about how social management practices affect the three spheres of animal welfare at this life stage and the need to standardize good socialization practices for this stage. In conclusion, all the information shows that social housing has improved animal welfare from affective states, cognitive judgment, and natural living spheres. However, gaps in research were identified in relation to the optimal time to separate the calf from the mother, the optimal time to group with conspecifics after birth and group size. Further research on positive welfare through socialization are needed., This research was supported by the Centro para el Desarrollo Tecnológico Industrial and Cowvet S.L through project CDTI-IDI20200936. In addition, PC held a grant from the Ph.D. student s research program of the Universitat Politècnica de València (PAID-01-20)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

An automatized methodology to generate velocity distortion panels for wind tunnel testing

  • Broatch, A.|||0000-0001-9991-1039
  • Margot , Xandra|||0000-0002-2639-0444
  • García-Tíscar, Jorge|||0000-0003-4934-4587
  • Felgueroso-Rodríguez, Andrés
[EN] Replicating the actual velocity distribution that a target will experience in real life is sometimes necessary to perform realistic aerodynamic characterizations in wind tunnels. In industrial aerodynamics, this is especially critical in aeroengine inlets, automotive and aircraft compressors, atmospheric boundary layers, etc. However, wind tunnels are designed to provide a flow as uniform as possible. To reproduce the desired velocity distribution, the utilization of certain devices for flow adaption is typically required, in a trial-and-error procedure. In this research, we propose a methodology to automatically generate distortion screens to reproduce a desired target velocity distribution, based on analytical relations between the porosity in a media and the total pressure loss induced by this porosity. A numerical routine is used to design a robust and easily -manufactured hexahedral grid that matches the required porosity distribution. Once this geometry is generated, it can be realized by means of widely-available, inexpensive additive manufacturing. To validate the proposed methodology, two geometries that reproduce 1D velocity distributions and another geometry which considers a bi-dimensional distribution have been generated and studied using both computational fluid dynamics and wind tunnel measurements, demonstrating good agreement between the target velocity distributions and those obtained numerically and experimentally., A. Felgueroso is supported through the Programa de Apoyo para la Investigación. Desarrollo of the Universitat Politècnica de Valencia under grant PAID-01-20 nº 21589.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Modelling of a linear Fresnel solar thermal collector system for industrial processes and validation with on-site operational measurements

  • David-Hernandez, Marco Antonio
  • Cazorla-Marín, Antonio|||0000-0003-3314-0395
  • Gonzálvez-Maciá, José|||0000-0001-9422-7756
  • Payá-Herrero, Jorge|||0000-0003-2663-3191
[EN] The industry sector consumes one-third of the world's energy demand, where 70 % is used for heat-intensive processes. To meet this heat demand, fossil fuel-based technologies are typically employed, resulting in high carbon emissions. To decarbonise the industry sector, concentrating solar thermal technologies such as Fresnel collectors have been studied to demonstrate their techno-economic viability. This paper presents a new modular quasi-dynamic model that has been validated using measurements from two experimental campaigns conducted in an existing solar field facility. The model predicts the system's dynamic behaviour accurately, including the pressure evolution inside the tank with an error below 0.1 bar and the solar field temperatures with an error of around 0.5 K. Additionally, the difference between the daily measured and simulated generated energy is below 4.5 % on the analysed days. The model was also used to simulate the annual performance, resulting in a specific energy generation of 1604.5 MJ/m2 and a thermal efficiency of 27.8 %. Furthermore, a techno-economic analysis is conducted, incorporating a 20-year system lifetime, which yielded a payback period of 10 years and potential savings in CO2 emissions of 17.8 tCO2 per year., The company SOLATOM is acknowledged for all the information data of the SHIP plant. This work was partially supported by the Research and Development Aid Program (PAID-01-20) of the Universitat Politecnica de Valencia for receiving the Research Fellowship FPI-UPV.2020. This publication has been carried out in the framework of the project "DECARBONIZACION DE EDIFICIOS E INDUSTRIAS CON SISTEMAS HIBRIDOS DE BOMBA DE CALOR", founded by the Spanish "Ministerio de Ciencia e Innovacion (MICIN)" with code number PID2020-115665RB-I00. The project was also partially founded by the R & D project SolarSteam4IND (TED2021-130614A-I00), funded by MICIN/AEI/10.13039/501100011033 and by the European Union NextGeneration EU/PRTR 2021 call. Funding for open access charge: CRUE-Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Improving the order of a fifth-order family of vectorial fixed point schemes by introducing memory

  • Cordero Barbero, Alicia|||0000-0002-7462-9173
  • Garrido-Saez, Neus|||0000-0002-7903-8591
  • Torregrosa Sánchez, Juan Ramón|||0000-0002-9893-0761
  • Triguero-Navarro, Paula|||0000-0002-7319-9992
[EN] In this paper, we present a family of iterative schemes for solving nonlinear systems with 3 real parameters. If we do not fix values for the parameters this family has order 2, but if we fix two of them we obtain order 5. Starting from the fifth-order family, we study different ways of introducing memory, thus obtaining 6 order methods. We also analyze the efficiency indices of the family and of the methods with memory obtained from it, and we compare them with each other, as well as compare them with other known classes of iterative methods with order 5 and 6. Several numerical experiments are carried out to see the behaviour of the discussed methods, including dynamical planes to compare the stability of the different iterative schemes., This research was partially supported by Spanish Ministerio de Ciencia, Innovacia y Universidades PGC2018-095896-B-C22, by the internal research project ADMIREN of Universidad Internacional de La Rioja (UNIR) and was partially supported by Universitat Politecnica de Valencia Contrato Predoctoral PAID -01-20-17 (UPV) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Design and Calibration of Moisture Sensor Based on Electromagnetic Field Measurement for Irrigation Monitoring

  • Basterrechea-Chertudi, Daniel Andoni
  • Parra-Boronat, Mar
  • Parra-Boronat, Lorena
  • Marín, José F.
  • Mauri, Pedro V.
  • Rocher, Javier|||0000-0003-0182-1671
  • Lloret, Jaime|||0000-0002-0862-0533
[EN] Soil moisture control is crucial to assess irrigation efficiency in green areas and agriculture. In this paper, we propose the design and calibration of a sensor based on inductive coils and electromagnetic fields. The proposed prototypes should meet a series of requirements such as low power consumption, low relative error, and a high voltage difference between the minimum and maximum moisture. We tested different prototypes based on two copper coils divided into two different sets (P1-P15 and NP1-NP4). The prototypes have different characteristics: variations in the number and distribution of spires, existence or absence of casing, and copper wires with a diameter of 0.4 or 0.6 mm. In the first set of experiments carried out in commercial soil, the results showed that the best prototypes were P5, P8, and P9. These prototypes were used in different types of soils, and P8 was selected for the subsequent tests. We carried the second set of experiments using soil from an agricultural field. Based on the data gathered, mathematical models for the calibration of prototypes were obtained and verified. In some cases, two equations were used for different moisture intervals in a single prototype. According to the verification results, NP2 is the best prototype for monitoring the moisture in agricultural lands. It presented a difference in induced voltage of 1.8 V, at 500 kHz, between wet and dry soil with a maximum voltage of 5.12 V. The verification of the calibration determined that the calibration using two mathematical models offers better results, with an average absolute error of 2.1% of moisture., This work is funded by the European Union under ERANETMED (Euro-Mediterranean Cooperation through ERANET joint activities and beyond), project ERANETMED3-227 SMARTWATIR and the European Union, MAPA and Comunidad de Madrid (through IMIDRA), under the project PDR18-XEROCESPED of the PDR-CM 2014-2020 (operative programme of the European Agriculture Fund for Rural Development, EAFRD). L.P. is funded by Conselleria de Educacion, Cultura y Deporte, programme Subvenciones para la contratacion de personal investigador en fase postdoctoral, grant APOSTD/2019/04; J.R. by the Ministerio de Educacion, Cultura y Deporte, through the "Ayudas para contratacion pre-doctoral de Formacion del Profesorado Universitario FPU (Convocatoria 2016)" grant number FPU16/05540; and M.P. by the Universitat Politecnica de Valencia through the pre-doctoral PAID-01-20 programme.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effects of cold seawater pre-treatments on induction of early sexual maturation and sperm production in European eel (Anguilla anguilla)

  • Ferrão, Leonor
  • Morini, Marina
  • González-López, Wendy Ángela
  • Felip, Alicia
  • Gallego Albiach, Victor|||0000-0002-9733-0625
  • Pérez Igualada, Luz María|||0000-0002-6678-7446
  • Asturiano, Juan F.|||0000-0002-6441-5294
[EN] To induce sexual maturation in captivity, eels rely on hormonal treatments, but this process is costly and time-consuming. As an alternative, different types of conditioning, also referred as pre-treatment, have been assessed to ease hormonal treatment response. Recent studies have shown that migrating eels experience a wide range of temperatures, varying from 12 °C at night to as low as to 8 °C during the day. Therefore, this study evaluates the effects of low-temperature (10 °C) seawater pre-treatments of different durations (2 and 4 weeks) on male eel reproduction. The eye, gonadosomatic and hepatosomatic indexes from control (without thermic seawater pre-treatment) and pre-treated fish were measured. Blood and testis samples were also collected for sex steroid and histology analysis, respectively. Eels pre-treated for 2 weeks demonstrated increased progestin levels, comparing with the control group. Eels pre-treated for 4 weeks showed significantly higher gonadosomatic index and elevated androgens and estradiol levels in comparison with the remaining groups. In eels pre-treated for 2 and 4 weeks, there was an increase in the proportion of spermatogonia type B cells compared to undifferentiated spermatogonia type A, a differentiation process that was not observed in the control group. Cold seawater pre-treatment induced early sexual maturation, including steroid production, which consequently stimulated biometric changes and increased spermatogonia differentiation. Following the pre-treatments, eels started receiving standard hormonal treatment (with recombinant human chorionic gonadotropin at 20 °C). Pre-treated males started to spermiate earlier than the control group. In some treatment weeks, pre-treated individuals registered higher values of sperm density, motility, and kinetic parameters. Moreover, an economic evaluation was carried out relating the investment made in terms of hormone injections with the volume of high-quality sperm obtained from each experimental group. The low temperature pre-treatments demonstrated their economic effectiveness in terms of hormone treatment profitability, increasing the production of high-quality sperm in the European eel. Thus, this in vivo study suggests that cold seawater pre-treatment may increase sensitivity to the hormone applied during standard maturation treatment., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. Funded by the Spanish Ministry of Science, Innovation and Universities (MCIU; Project EELGONIA; RTI2018-096413-B-I00). L.F. had a PhD contract funded by the Generalitat Valenciana, Programa Grisolía (GRISOLIAP/2020/063). M.M. had a postdoctoral contract from the MCIU (MCIN/AEI/https:// doi.org/10.13039/501100011033) funded by European Union NextGenerationEU/ PRTR (C17. I1) and by Generalitat Valenciana (THINKINAZUL/2021/012) to SEASPERM. W.A.G.- L had a Margarita Salas postdoctoral contract (RD 289/2021.UAB) from the Spanish Ministry of Universities. V.G. had a Beatriz Galindo aid (BG22/00024; for the attraction of research talent 2022) funded by the Ministerio de Universidades (Spain). Funding for open access charge: CRUE-Universitat Politècnica de València
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Alkene Cross-Metathesis with 2,5-Dimethyl-2,4-Hexadiene Enables Isobutylenyl/Prenyl Functionalizations and Rubber Valorization

  • Mingueza-Verdejo, Paloma
  • Rodríguez-Nuévalos, Silvia|||0000-0002-5361-1169
  • Oliver-Meseguer, Judit|||0000-0003-1555-3583
  • Leyva Perez, Antonio|||0000-0003-1063-5811
[EN] 2,5-Dimethyl-2,4-hexadiene is a readily available and easily managable compound, whose symmetric and polymethylated dienic structure should be prone to engage in cross-metathesis reactions with other alkenes, but this has not been apparently exploited so far. Here we show that this reactant enables the easy synthesis of tri- and tetra-susbtituted alkenes (i. e. isobutylenyl and prenyl groups) from simple alkenes under mild reaction conditions, not only with the conventional 2nd generation Grubbs catalyst but also with other Grela-type catalyts such as StickyCat,TM AquaMetTM and GreenCatTM. The use of liquid and low volatile 2,5-dimethyl-2,4-hexadiene avoids the use of gaseous alkene reactants and, besides, showcases the reactivity of polyisoprene (rubber), thus allowing to optimize the reaction conditions for rubber upcycling, after metathesis reaction of the pristine or used polymer with simple alkenes. These results bring low volatile isoprene-type compounds as privileged poly-substituted reactants for alkene cross-metathesis reactions.; 2,5-Dimethyl-2,4-hexadiene is presented here as a suitable and selective reactant for delivering either prenyl or isobutylenyl groups to alkenes through a cross-metathesis reaction. The process smoothly operates at room temperature, give high yields of products, includes a late-stage transformation, and enables the valorization of real samples of recycled rubber. image, This work is part of the project PID2020-115100GB-I00 funded by MCIN/AEI/10.13039/501100011033MICIIN (Spain). Financial support by Severo Ochoa centre of excellence program (CEX2021-001230-S) is gratefully acknowledged. The work has also been funded by Generalitat Valenciana (INNEST/2022/20 from Agencia Valenciana de la Innovacio). P.M.-V. thanks ITQ, UPV-CSIC for concession of a contract (PAID 01-20). S.R.-N. thanks Agencia Valenciana de la Innovacio for a contract (INNEST/2022/20). J.O.-M. thanks the MICIIN for the concession of the Ramon y Cajal contract RYC2022-036154-I (funded by MCIN/AEI/10.13039/501100011033).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Single-atom Cu catalysts for the oxidative coupling of styrenes with aryl sulfones: from salts and zeolites to MOFs

  • Bilanin-Artigado, Cristina
  • Zheng, Yongkun
  • Pardo, Emilio
  • Vidal Moya, José Alejandro
  • Mon-Conejero, Marta|||0000-0002-1983-1096
  • Leyva Perez, Antonio|||0000-0003-1063-5811
[EN] Oxidative couplings in organic synthesis are typically performed with unrecoverable precious metal catalysts in solution. Here we show that CuCO3, Cu-supported zeolites and Cu-metal organic frameworks (MOFs) can replace AgNO3 as a catalyst for the oxidative coupling of styrenes with aryl sulfones, to give styrenyl sulfones. The single Cu atoms supported in zeolites show higher catalytic activity than the Cu salt as the basicity of the zeolite framework increases, to match the carbonate salt, and when embedded directly into a MOFs ' walls with oxamate ligands (thus with the proper electronic environment) they can be recycled for at least five times without any depletion in catalytic activity. These results showcase not only the substitution of a noble metal (Ag) by an abundant metal (Cu) in a metal-catalyzed oxidative coupling reaction, but also going from a salt to a supported solid catalyst, of high significance from a sustainable point of view., Financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033) is gratefully acknowledged. This work was also supported by the MICIIN (Spain) through projects TED2021-130465B-I00, PID2020-115100GB-I00, PID2019-104778GB-I00 and "Maria de Maeztu" CEX2019-000919-M. The Generalitat Valenciana (Project PROMETEO/2021/054) is also acknowledged. E.P. acknowledges the financial support of the European Research Council under the European Union's Horizon 2020 research and innovation programme/ERC Grant Agreement No 814804, MOF-reactors. M.M. thanks MICIIN from a contract under the Juan de la Cierva program (FJC2019-040523-I) . C.B. thanks ITQ/UPV-CSIC for a contract (PAID 01-20) . Y.Z. thanks to the China Scholarship Council (CSC No: 202009350009) for a Ph.D. fellowship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

One-Pot Synthesis of Terminal Alkynes from Alkenes

  • Bilanin-Artigado, Cristina
  • Singh, Amravati Shivaji
  • Martínez-Belenguer, Lluis
  • Leyva Perez, Antonio|||0000-0003-1063-5811
[EN] The direct synthesis of terminal alkynes from widely available terminal alkenes is an unmet challenge in organic synthesis. Here, we show that alkyl and aromatic terminal alkenes can be converted to the corresponding alkynes in a one-pot process consisting of a Ru-catalyzed dehydrogenative hydrosilylation, followed by an oxidative dehydrogenative reaction of the vinyl silane intermediate, enabled by the combination of PhIO with BF3. This formal alkene dehydrogenation reaction with commercially available reagents and under mild reaction conditions gives access to terminal alkynes in a simple manner, including acetylene., Financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033, and PID2020-115100GB-I00) is gratefully acknowledged. C.B. thanks ITQ/UPV-CSIC for a contract (PAID 01-20). A.S.S. also thanks ITQ for the concession of a contract.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Rapid aerodynamic characterization of surface heat exchangers for turbofan aeroengines through optical techniques and additive manufacturing

  • Broatch, A.|||0000-0001-9991-1039
  • García-Tíscar, Jorge|||0000-0003-4934-4587
  • Quintero-Igeño, Pedro-Manuel|||0000-0003-4373-2079
  • Felgueroso-Rodríguez, Andrés
[EN] Surface heat exchangers that use the bypass flow as heat sink are becoming a widely used solution to alleviate the high thermal load of modern aeroengines. Experimental characterization of such heat exchangers in full-scale engine tests is extremely expensive and time-consuming, so carrying out experiments in scaled wind tunnels that can replicate their very challenging flow conditions is highly desirable. However, intrusive instrumentation can affect the actual aerodynamics of the component due to the reduced size of the section and the typical high air velocities of turbofan engines. For this reason, a methodology to characterize a surface heat exchanger designed to work in the turbofan bypass using optical techniques is presented in this work. Additionally, the possibility of replicating the experimental conditions using additively manufactured models of exchangers would allow rapid preliminary characterization of these components. In this investigation, different non-intrusive techniques such as PIV, LDA, Schlieren, or LDV have been applied to determine the heat exchanger aerodynamic performance and vibration response, and a detailed characterization of the flow field has been carried out. Data have been cross-validated using different measurement techniques. A 3D-printed model has also been built to compare with the aluminum heat exchanger, showing almost an identical behavior in terms of velocity distribution downstream of the heat exchanger and pressure drop induced by its fins, as well as corrected frequencies, confirming thus the suitability of additive manufacturing for the aerodynamic characterization of these devices in preliminary stages., A. Felgueroso was supported through the Programa de Apoyo parala Investigacion y Desarrollo of the Universitat Politecnica de Valencia under grant PAID-01-20 no 21589. Funding for open access charge: CRUE-Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Bioluminescent sentinel plants enable autonomous diagnostics of viral infections

  • Calvache-Román, Camilo Alberto
  • García-Pérez, Elena
  • Fleiss, Aubin
  • Ezzeddin-Ayoub, Mustafa
  • Pasin, Fabio
  • Sarkisyan, Karen S.
  • Vázquez-Vilar, Marta
  • Rodríguez-Rodríguez, Marta
  • Victor
  • Daròs, José-Antonio|||0000-0002-6535-2889
  • Orzáez Calatayud, Diego Vicente
[EN] Plants engineered with synthetic genetic programs can transform how we monitor and manage the extension of crop pests and diseases. Here, we establish a bioluminescent platform in Nicotiana benthamiana for autonomous viral sensing based on the fungal bioluminescence pathway (FBP). We first demonstrate that recombinant viruses can deliver missing pathway components, establishing a methodological framework for spatially resolved tracking of infection dynamics. Leveraging this starting point, we develop a dual-output sentinel circuit that uses a protease-responsive bioluminescence resonance energy transfer (BRET) module to report infection through a virus-triggered spectral shift in luminescence. In the absence of infection, plants emit a stable yellow glow indicating system integrity. Upon infection with potyviruses, cleavage of the BRET fusion by the virus-encoded NIa-protease activates a distinct colour change detectable with low-cost imaging. This modular design is compatible with other pathogens carrying specific proteases and supports future multiplexing strategies. Our results highlight the potential of synthetic sentinel gene circuits as autonomous biosensors for precision crop protection., C.C. is recipient of a FPI-UPV fellowship (ref. PAID-01-20, Universitat Politecnica de Valencia), M. R-R is recipient of a FPU fellowship (ref. FPU21/00055, Ministerio de Ciencia, Innovacion y Universidades, Spain), V. V-V is recipient of a FPI fellowship (ref. PREP2022-000602, Ministerio de Ciencia, Innovacion y Universidades, Spain) and E.G-P recipient of ACIF fellowship (ref. ACIF/2020/309, Generalitat Valenciana); F.P. is supported by RYC2023-045411-I (Ministerio de Ciencia, Innovacion y Universidades, Spain). This research was supported by the Ministerio de Ciencia, Innovacion y Universidades (Spain) through Agencia Estatal de Investigacion (grants PID2022-141438OB-I00 and PID2023-146418OB-I00; MICIU/AEI/10.13039/501100011033 and ERDF, EU), by Generalitat Valenciana (Grant CIPROM/2022/21) and by by the European Union under the European Regional Development Fund (ERDF, EU) Programme, Comunitat Valenciana 2021-2027 (Grant INNEST/2025/49). The Synthetic Biology Group is funded by the MRC Laboratory of Medical Sciences (UKRI MC-A658-5QEA0) and UKRI Biotechnology and Biological Sciences Research Council through the International Science Partnerships Fund (grant number APP33664).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Evaluation of GDI spray structures under flash boiling and strong collapse conditions with diverse fuels

  • Payri, Raul|||0000-0001-7428-5510
  • Marti-Aldaravi, Pedro|||0000-0003-4650-4004
  • Mendoza Alvarez, Victor
  • Bautista, Abian
[EN] GDI (Gasoline Direct Injection) sprays are a matter of continuous research due to their potential for higher thermal efficiency and power output. Injections in GDI engines tend to happen at relatively high temperatures, which, combined with volatile fuels, are a perfect environment for flashing sprays, which are present in recently developed GDI engine passenger cars. Phenomena like flash boiling and especially spray collapse are still being investigated due to their complexity and impact on the engine performance. In the present research, the impact of different levels of flash boiling in the sprays is analyzed. Four surrogate mono-component fuels were tested with different volatile properties. Two optical techniques were carried out simultaneously: light extinction images (DBI) and frontal MIE scattering. The spray width was used to represent the radial expansion and study its relation with the spray collapse due to flash boiling. The degree of collapse was quantified by means of the instantaneous spray width variation for which three levels of collapse were identified. A novel MIE frontal approach was employed to study the spray surface evolution and the collapsing time by monitoring the nozzle tip clouding (opaquing) by the fuel. Results showed an increment of the width with the ratio of saturation to ambient pressure (R¿), as well as a strong correlation between the spray surface and the R¿ at each fuel temperature when the spray is stabilized. Based on the MIE technique, three collapse instants were identified throughout the injection time depending on the R¿., This work was funded by the Spanish Ministerio de Ciencias e Inno-vacion through project reference PID2021-1258120B-C21. The author Victor Mendoza thanks the Universitat Politecnica de Valencia for his predoctoral contract, which is included within the framework of "Programa Propio de la Universitat Politècnica de València - Subprograma 1 (PAID-01-20) ".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Estudio del interferómetro de Michelson mediante un laboratorio virtual, Study of the Michelson interferometer by means of a virtual laboratory

  • Muñoz-Pérez, Francisco M.
  • Ortega Mendoza, J. Gabriel
  • Monsoriu Serra, Juan Antonio|||0000-0003-3350-7951
[EN] Interference is a phenomenon of wave physics that occurs when two or more waves overlap. In the case of light, this results in patterns of light and shadow. In this paper, we present a virtual laboratory developed as a graphical user interface (GUI) in Matlab software, which aims to facilitate the study of the interference phenomenon of light for different wavelengths. The main goal is to provide students of Physics and Optics, both at undergraduate and graduate level, with the necessary skills to understand the wave behavior of light through the analysis of the interference pattern generated., [ES] La interferencia es un fenómeno de la física de ondas que se produce cuando dos o más ondas se superponen. En el caso de la interferencia de la luz, esto resulta en patrones de luz y sombra. En este trabajo, presentamos un laboratorio virtual desarrollado como interfaz gráfica de usuario (GUI) en el software Matlab. que tiene como propósito facilitar el estudio del fenómeno de interferencia de la luz para diferentes longitudes de onda. La meta principal es proporcionar a los estudiantes de asignaturas de Física y Óptica, tanto a nivel de pregrado como de grado, las competencias necesarias para comprender el comportamiento ondulatorio de la luz a través del análisis del patrón de interferencia generado., Este trabajo ha sido financiado por el Ministerio de Ciencia e Innovación (PID2022-142407NB-I00) y por la Generalitat Valenciana (CIPROM/2022/30). F.M.M.P. también agradece la financiación de la Universitat Politècnica de València (PAID-01-20-25). Este trabajo ha sido desarrollado por el Equipo de Innovación y Calidad Educativa MSEL de la Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Enhancing Six Sigma with latent variable models: An industrial application of multivariate Six Sigma in the automotive sector

  • García-Carrión, Sergio
  • Pozueta, Lourdes
  • Ferrer, Alberto|||0000-0001-7244-5947
[EN] The traditional Six Sigma toolkit presents significant limitations for problem solving in Industry 4.0 settings. To address these limitations, it can be extended with latent variable-based multivariate statistical techniques such as Principal Component Analysis (PCA) and Partial Least Squares (PLS), in what has been referred to as multivariate Six Sigma. In this work, this approach is applied to address vibration performance issues in the caliper, a key component of a car's braking system. By appropriately integrating these techniques into the five-step DMAIC cycle, the root cause was satisfactorily identified, an effective corrective action was implemented, and the objectives of the project were successfully achieved. This case study provides further evidence of the practical utility of multivariate Six Sigma and demonstrates its potential for broader adoption in industrial projects., This work was supported by the Research and Development Support Program of the UPV (PAID-01-20) and by the Generalitat Valenciana (AICO/2021/111 and CIAICO/2023/189).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Modifying Kurchatov&apos, s method to find multiple roots of nonlinear equations

  • Cordero Barbero, Alicia|||0000-0002-7462-9173
  • Garrido-Saez, Neus|||0000-0002-7903-8591
  • Torregrosa Sánchez, Juan Ramón|||0000-0002-9893-0761
  • Triguero-Navarro, Paula|||0000-0002-7319-9992
[EN] We present a modification of Kurchatov's iterative method in order to solve a nonlinear equation with multiple roots, that is, for approximating solutions with multiplicity greater than one. One of its principal advantages is that you do not have to know a priori the multiplicity of the root, since it does not appear in the iterative expression. In order to examine the behaviour of the proposed method, we perform a dynamical analysis. Furthermore, we carry out some numerical experiments in order to confirm the theoretical results and compare the proposed method with other known methods for dealing with multiple roots., This research was partially supported by Spanish Ministerio de Ciencia, Innovacion y Universidades PGC2018-095896-B-C22 and was partially supported by Universitat Politecnica de Valencia Contrato Predoctoral PAID-01-20-17 (UPV) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of the chain length of geraniol esters on the plasticization efficiency with poly(lactide)

  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
  • Garcia-Garcia, Daniel|||0000-0002-2520-0186
  • Balart, Rafael|||0000-0001-5670-7126
  • Tejada-Oliveros, Ramón
  • Moreno-García, Virginia
[EN] This work reports on the development of environmentally friendly PLA formulations utilizing different esters derived from geraniol as plasticizers. Geranyl formate, acetate, propionate, butyrate, isovalerate and caproate at 10 wt% were combined with PLA in formulations that were produced through extrusion and injection moulding processes. Theoretical solubility parameter studies predicted good miscibility between PLA and all the plasticizers. This was confirmed by tensile test, which showed elongation at break values between 200 and 300 %, totally in contrast with the 8 % value of neat PLA. Geranyl acetate and geranyl formate exhibited the highest elongation at break behavior. These values of elongation at break were supported by FESEM images, which showed clear signs of plasticization. The plasticization effect was further corroborated by DSC and DMTA analysis, where a clear decrease in the glass transition temperature was observed from a typical value of 60 °C for neat PLA down to 40¿50 °C for the plasticized blends. This was related to an enhanced chain mobility of the amorphous regions of PLA. Moreover, the plasticizers slightly increased the water absorption capabilities of PLA, as demonstrated by an increase in the water contact angle and water uptake for 11 weeks., This research is a part of the grant PID2020-116496RB-C22, funded by MCIN/AEI/10.13039/501100011033 and the grant TED2021- 131762A-I00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union "NextGenerationEU"/PRTR. Authors also thank Generalitat Valenciana-GVA for funding this research through the grant numbers AICO/2021/025 and CIGE/2021/094. Funded with Aid for First Research Projects (PAID-06-22), Vice -rectorate for Research of the Universitat Politecnica de Valencia (UPV) . R.T.-O. wishes to thank UPV for the grant received though the PAID-01-20 program. J. I.-M. wants to thank FPU19/01759 grant funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future. J. G.-C. wants to thank FPU20/01732 grant funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future. V. M. thanks Ge eralitat Valenciana-GVA for funding a postdoc position through the APOSTD program co -funded by ESF Investing in your future, grant number CIAPOS/2021/67. Microscopy Services at UPV are also acknowledged by their help in collecting and analyzing images.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

The multiple and contested worlds of urban food governance: The case of the city of Valencia

  • Zerbian, Tanya
  • Segura-Calero, Sergio
  • Escario-Chust, Ana|||0000-0002-8094-9894
  • Palau-Salvador, Guillermo|||0000-0003-0492-6567
[EN] Cities are positioned as critical actors in agri-food sustainability transitions through the implementation of food policy councils and food strategies for urban policymaking. Promoting participatory arrangements in food policymaking allows multiple actors to engage in a contested process of mutual learning that helps construct a common goal. The development of these multi-actor instruments has meant that social movements have had the possibility of reclaiming power in the governance spaces of cities, contributing to urban agri-food transitions. Nevertheless, while signalling that transition governance instruments can bring more inclusive and collective change, critical studies call for the need to pay attention to power dynamics in these processes. Drawing from this notion, this paper explores how diverse governance actors mobilise and execute power within and between two urban food governance instruments ¿ an agri-food transition platform and a food policy council ¿ in Valencia, Spain. The study contributes to urban food governance and sustainability transitions governance literature through raising three critical points regarding the potential of urban food governance processes for sustainability transitions: the longitudinal and cross-scale evaluation of power dynamics and subsequent tensions, the acknowledgement of different kinds of power, and the possible coexistence of different but symbiotic spaces for transition governance., This piece of research work has received funding from the Generalitat Valenciana and the European Social Fund through the postdoctoral grant CIAPOS/2021/178. This research has been partly funded by the European Commission under the DTA3/COFUND Marie Sklodowska-Curie PhD Fellowship (Grant Agreement 801604) and the Program of the Polytechnic University of Valencia Subprogram 1 (PAID-01-20).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Study of the hydraulic characteristics of two injectors fed with different fuels in a GDI system

  • Payri, Raul|||0000-0001-7428-5510
  • Gimeno, Jaime|||0000-0003-3317-9994
  • Marti-Aldaravi, Pedro|||0000-0003-4650-4004
  • Mendoza Alvarez, Victor
[EN] In the latter years, the Gasoline Direct Injection systems (GDI) have been studied with the aim of providing a solution to the particulate matter emission issue. It has been proved that emission levels are reduced with the tuning of certain variables, such as the injection pressure, that affect the internal flow in the nozzle, which in turn plays an vital role in the spray development. On the other hand, the implementation of fuels such as alcohols and some surrogates shows potential for improving the engine performance and emissions because of the different physical properties of the fuels that can alter the mixture formation and the chemical properties that affect the combustion. In this work, an experimental study of the influence of different fuels on the internal flow is realized for a vast number of conditions, including those that promote flash boiling and strong collapse of the spray at different ambient temperatures and pressures. The fuels employed are three components of gasoline: iso-octane, n-hexane and n-pentane; ethanol; and two blends (E00 and E20) for two nozzle geometries. Two experimental techniques are used to measure the mass flow rate and momentum flux of the spray, and then characterize the flow inside the nozzle. The results show a similar injector behavior for all fuels, except for the ethanol, which shows an increase in the rate of injection and induces a hydraulic delay., This work has been partially funded by Generalitat Valenciana "Nuevos conceptos en inyeccion de gasolina (NCIG)'', Spain with AICO/2020/208 reference. The author Victor Mendoza thanks the Universitat Politecnica de Valencia, Spain for his predoctoral contract, which is included within the framework of "Programa Propio de la Universitat Politecnica de Valencia -Subprograma 1 (PAID-01-20)''.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Design of iterative methods with memory for solving nonlinear systems

  • Cordero Barbero, Alicia|||0000-0002-7462-9173
  • Garrido-Saez, Neus|||0000-0002-7903-8591
  • Torregrosa Sánchez, Juan Ramón|||0000-0002-9893-0761
  • Triguero-Navarro, Paula|||0000-0002-7319-9992
[EN] In this paper, we design two parametric classes of iterative methods without memory to solve nonlinear systems, whose convergence order is 4 and 7, respectively. From their error equations and to increase the convergence order without performing new functional evaluations, memory is introduced in these families of different forms. That allows us to increase from 4 to 6 the convergence order in the first family and from 7 to 11 in the second one. We perform some numerical experiments with big size systems for confirming the theoretical results and comparing the proposed methods along other known schemes., Ministerio de Ciencia e Innovacion, Grant/Award Number: PGC2018-095896-B-C22; European Union; Universitat Politecnica de Valencia Contrato Predoctoral, Grant/Award Number: PAID-01-20-17
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Spectral Analysis of Anomalous Capacitance Measurements in Interleaving Structures: Study of Frequency Distribution in Photomultipliers

  • Milian Sánchez, Víctor
  • Balvis Outeiriño, Eduardo
  • Sahu, Sarira
  • Iglesias-Martínez, Miguel Enrique|||0000-0003-1405-5099
  • Guerra-Carmenate, José
  • Castro-Palacio, Juan Carlos|||0000-0002-0132-9989
  • Fernández de Córdoba, Pedro|||0000-0002-0347-7280
  • Muñoz-Pérez, Francisco Misael|||0000-0002-0313-5029
  • Monsoriu Serra, Juan Antonio|||0000-0003-3350-7951
[EN] This study presents experimental results on capacitance fluctuations in several devices located within an interleaving structure. Specifically, it examines the behavior of the capacitance between the anode and cathode of a photomultiplier, comparing it with the characteristics of the ultra-stable capacitor analyzed in a previous paper via measurements inside and outside a modified Faraday cage. The results cover spectral and correlation analyses both inside and outside the box, confirming differences in the spectrum using the periodograms. In particular, the confidence intervals for the mean capacitance values show significant changes between the two scenarios, from the inside to the outside of the enclosure. In the case of the ultra-stable capacitor, there is an increase from 0.004 to 0.008 nF. On the other hand, a symmetry analysis is conducted for all measurements taken both outside and inside the modified Faraday cage. It is observed that in all cases, there is clear non-symmetric behavior in the data., Miguel E. Iglesias Martínez s work was partially supported by the postdoctoral research scholarship Ayudas para la recualificación del sistema universitario español 2021 2023. Modalidad: Margarita Salas from the Ministerio de Universidades, Spain, funded by the European Union-Next Generation EU and additionally funded by Ayuda para potenciar la investigación postdoctoral de la UPV (PAID-PD-22) . The work of S.S. is partially supported by DGAPA-UNAM (México) Project No. IN103522. This work was supported by the Spanish Ministerio de Ciencia e Innovación (PID2022-142407NB-I00) and by Generalitat Valenciana (grant CIPROM/2022/30), Spain. F.M.M.P also acknowledges the financial support from the Universitat Politècnica de València (PAID-01- 20-25), Spain. This work was supported by the Spanish government (PID2021-128676OB-I00 and PID2022-142407NB-I00) and by Generalitat Valenciana (grant CIPROM/2022/30), Spain
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Three-step iterative weight function scheme with memory for solving nonlinear problems

  • Cordero Barbero, Alicia|||0000-0002-7462-9173
  • Garrido-Saez, Neus|||0000-0002-7903-8591
  • Torregrosa Sánchez, Juan Ramón|||0000-0002-9893-0761
  • Triguero-Navarro, Paula|||0000-0002-7319-9992
[EN] In this manuscript, we present a parametric family of derivative-free three-step iterative methods with a weight function for solving nonlinear equations. We study various ways of introducing memory to this parametric family in order to increase the order of convergence without new functional evaluations. We also performed numerical experiments to compare the iterative methods from different points of view., Ministerio de Ciencia e Innovacion, Grant/Award Number: PGC2018-095896-B-C22; Universidad Internacional de La Rioja; Universitat Politecnica de Valencia, Grant/Award Number: PAID-01-20-17
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Comparative Study of Numerical Methods for Solving the Fresnel Integral in Aperiodic Diffractive Lenses

  • Garmendía-Martínez, Adrián|||0000-0003-3443-5144
  • Gimenez Palomares, Fernando
  • Castro-Palacio, Juan Carlos|||0000-0002-0132-9989
  • Monsoriu Serra, Juan Antonio|||0000-0003-3350-7951
  • Ferrando, Vicente|||0000-0002-7434-7109
  • Muñoz-Pérez, Francisco M.
  • Furlan, Walter D.
[EN] In this work, we present a comparative analysis of different numerical methods to obtain the focusing properties of the zone plates based on Fibonacci and Cantor sequences. The Fresnel approximation was solved numerically in order to obtain the axial irradiance provided by these diffractive lenses. Two different methods were applied. The first one is based on numerical integration, specifically the Simpson integration method and the two-dimensional Gaussian quadrature. The second consisted in the implementation of the Fast Fourier Transform in both one and two dimensions. The axial irradiance of the lenses, the relative error with respect to the analytical solution, and the calculation time required by each method are analyzed and compared. From this analysis it was concluded that the Gauss method presents the best balance between accuracy and computation time. This analysis could be useful to decide the most convenient numerical method to be used for the study of more complex diffractive structures., This work was supported by the Ministerio de Ciencia e Innovacion de Espana (grant PID2019-107391RB-I00) and by Generalitat Valenciana (grant PROMETEO/2019/048), Spain. A.G.M. and F.M.M.P. acknowledge the financial support from the Generalitat Valenciana (GRISOLIAP/2021/121) and from the Universitat Politècnica de València (PAID-01-20-25), respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Three-Dimensional Refractivity Model for Atmospheric Mitigation in Distance and Vertical Angle Measurements

  • Luján, Raquel
  • García-Asenjo Villamayor, Luis|||0000-0001-6535-2216
  • Baselga Moreno, Sergio|||0000-0002-0492-4003
[EN] Atmospheric refraction is a significant challenge to accurate distance and angle measurements in open-air environments, often limiting the precision of measurements obtained using electro-optic geodetic instruments despite their nominal accuracies. This study introduces a novel model, 3D-RM, designed to mitigate atmospheric effects on both distance and vertical angle measurements. The 3D-RM integrates in situ meteorological data from a network of automatic data-loggers, terrain information from a digital terrain model (DTM), and sensible heat flux from the fifth generation of European Centre for Medium-Range Weather Forecast reanalysis (ERA5), which is used in the application of the Turbulence Transfer Model (TTM) for estimating vertical refractivity gradients at various height levels. The model was tested with total station observations to 10 target points during two field campaigns. The results show that applying the model for distance correction leads to improvements in terms of closeness to reference values when compared to the standard method, which relies only on meteorological data collected at the station. Furthermore, the model has been additionally tested by removing the station meteorological data (3D-RM2). The results demonstrate that accurate corrections can be obtained even without the need of meteorological sensors specifically installed at the station point, which makes it more flexible. The 3D-RM is a cost-effective and relatively easy-to-implement solution, offering a promising alternative to existing methodologies, such as measuring meteorological values at both station and target points or the development of new instruments that can compensate the refractivity (such as a multiple-color electronic distance meter)., The research contract of Raquel Lujan was funded by the Programa de Ayudas de Investigacion y Desarrollo (PAID-01-20) de la Universitat Politecnica de Valencia. This work was partially funded by the project Development of High-Precision GNSS Techniques for Dimensional Metrology, Deformation Monitoring, and Geodetic Networks for Civil Engineering Projects (GNSS-Metrology), ref. PID2022-142363NB-I00, Plan Estatal de Investigacion Cientifica y Tecnica y de Innovacion 2021-2023, MCIN/AEI/10.13039/501100011033/FEDER, UE.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Reconfigurable Activation Functions in Integrated Optical Neural Networks

  • Rausell-Campo, Jose Roberto|||0000-0002-6710-4766
  • Pérez-López, Daniel
[EN] The implementation of nonlinear activation functions is one of the key challenges that optical neural networks face. To the date, different approaches have been proposed, including switching to digital implementations, electro-optical or all optical. In this article, we compare the response of different electro-optic architectures where part of the input optical signal is converted into the electrical domain and used to self-phase modulate the intensity of the remaining optical signal. These architectures are made up of Mach Zehnder Interferometers (MZI) and microring resonators (MRR). We have compared the corresponding transfer functions with commonly used activation functions in state-of-the-art machine learning models and carried out an in-depth analysis of the capabilities of those architectures to generate the proposed activation functions. We demonstrate that a ring assisted MZI and a two-ring assisted MZI present the highest expressivity among the proposed structures. To the best of our knowledge, this is the first time that a quantified analysis of the capabilities of optical devices to mimic state-of-the-art activation functions is presented. The obtained activation functions are benchmarked on two machine learning examples: classification task using the Iris dataset, and image recognition using the MNIST dataset. We use complex-valued feed-forward neural networks and get test accuracies of 97% and 95% respectively., This work was supported in part by FPI-UPV Grant Program under Grant PAID-01-20-24 from the Universitat Politecnica de Valencia, through the Spanish MINECO Juan de la Cierva Program and in part by the H2020-ICT2019-2 Neoteric 871330 Project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Multi-trap optical tweezers based on kinoform Silver Mean lenses

  • Muñoz-Pérez, Francisco M.
  • Furlan, Walter D.
  • Garmendía-Martínez, Adrián|||0000-0003-3443-5144
  • Ferrando, Vicente|||0000-0002-7434-7109
  • Castro-Palacio, Juan Carlos|||0000-0002-0132-9989
  • Monsoriu Serra, Juan Antonio|||0000-0003-3350-7951
[EN] In this paper, we present the design and implementation of multi-trap optical tweezers based on new quadrifocal kinoform lenses. The phase distribution of these diffractive lenses is characterized by the Silver Mean sequence. The focusing properties of the resulting aperiodic DOEs coined Kinoform Silver Mean Lenses (KSMLs) are numerically examined. It is shown that, under monochromatic illumination, a KSML drives most of the incoming light into four single foci whose focal lengths are related to the Silver ratio. In this way, a KSML improves the diffraction efficiency of binary Fresnel Silver Mean Zone Plates. Through experimental results, the simultaneous trapping of particles in the four focal planes and their three-dimensional manipulation is demonstrated., This work was supported by the Spanish Ministerio de Ciencia e Innovación (grant PID2022-142407NB-I00) and by Generalitat Valenciana (grant CIPROM/2022/30), Spain. F.M.M.P. and A.G.M. acknowledge the financial support from the Universitat Politècnica de València (PAID-01-20-25) and from the Generalitat Valenciana (GRISOLIAP/2021/121), respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

EDM-GNSS distance comparison at the EURO5000 calibration baseline: preliminary results

  • Wezka, Kinga
  • Próchniewicz, Dominik
  • Szpunar, Ryszard
  • Garrigues Talens, Pascual
  • Walo, Janusz
  • Luján, Raquel
  • García-Asenjo Villamayor, Luis|||0000-0001-6535-2216
  • Baselga Moreno, Sergio|||0000-0002-0492-4003
[EN] At the Pieniny Klippen Belt in Poland, the novel primary reference baseline EURO5000 is required as part of the European Research project GeoMetre to both validate refractivity-compensated EDM prototypes and investigate the metrological traceability of GNSS-based distances. Since the aimed uncertainty is 1 mm at 5 km (k = 2), the design, construction, and validation must be carefully prepared to fulfil the high standards of the GeoMetre field campaigns which are planned to be carried out in May 2022. This contribution describes the main features of the EURO5000 and presents the results of the preliminary validation which includes a first comparison between the results obtained by using precise currently available EDMs as well as GNSS techniques following the standard GNSS geodetic processing algorithms, on the one hand, and the improved GNSS-Based Distance Meter (GBDM+) approach developed at UPV, on the other hand. The preliminary validation presented in this contribution also permits (1) to detect potential problems in the use of the baseline such as potential geodynamic problems, atmospheric refraction or multipath limitations, (2) to produce a set of reliable results, and (3) to pave the way for the final field comparisons between the novel EDMs and the GBDM+ approach. The result of this metrological experiment may significantly contribute to overcome the limitations of current high-precision deformation monitoring applications that require their scale to be consistent with the SI-metre within 0.1 ppm in several km., The project 18SIB01 GeoMetre hasreceived funding from the EMPIR programme co-financedby the Participating States and from the European Union's Horizon 2020 research and innovation programme, funderID: 10.13039/100014132. Raquel Lujan acknowledges the funding from the Programa de Ayudas de Investigaciony Desarrollo (PAID-01-20) de la Universitat Politecnica deValencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Experimental aerothermal characterization of surface air-cooled oil coolers for turbofan engines

  • Broatch, A.|||0000-0001-9991-1039
  • Olmeda, P.|||0000-0002-3161-0165
  • García-Tíscar, Jorge|||0000-0003-4934-4587
  • Felgueroso-Rodríguez, Andrés
  • Chávez-Modena, M.
  • González, L. M.
  • Gelain, M.
  • Couilleaux, A.
[EN] Thermal management is a major challenge for new generation turbofan aero-engines. One of the most promising heat exchangers are the so-called surface air-cooled oil coolers (SACOCs). In this study, an experimental methodology is proposed and implemented in order to characterize SACOCs mounted in turbofan bypass ducts. Three different SACOC geometries have been characterized under the same nominal operating point, while the actual velocity profile in the bypass was reproduced by means of a distortion screen upstream the test section. The heat exchangers were mounted in counterflow configuration and feature the same fin geometry in the oil side. The three prototypes varied only in the air side, being the first a baseline flat plate, the second a SACOC with standard trapezoidal fins and the third featuring optimized fins designed to reduce the pressure drop. Aerothermal results demonstrated that the effect of the SACOC on the bypass flow was confined to a region about the same height and width of the finned area, avoiding the need of reproducing the whole bypass duct. However, for this reduced-height experimental approach to be valid, we show that the velocity profile needs to be rearranged to match the specific section of the whole bypass. We also demonstrate how the optimized fin geometry achieved a 10% lower friction factor than the standard one at nominal flow conditions while increasing the overall heat transfer coefficient by 5.2%., This project has received funding from the Clean Sky 2 Joint Undertaking under the European Union's Horizon 2020 research and innovation programme under grant agreement n° 831977: Aerodynamic upgrade of Surface Air-Cooled Oil Coolers (SACOC). A. Felgueroso is supported through the Programa de Apoyo para la Investigación y Desarrollo of the Universitat Politècnica de València under grant PAID-01-20 n° 21589. The authors also wish to thank Safran Aircraft Engines for their kind permission to share the data presented in this publication. Special thanks are also given to Mr. Adolfo Guzmán for his inestimable support during the experimental campaign.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Experimental and numerical methodology for the aero-thermal analysis of a SACOC heat exchanger

  • Chávez-Modena, Miguel
  • Miguel González, Leo
  • Valero, Eusebio
  • Felgueroso, Andrés
  • Broatch, A.|||0000-0001-9991-1039
  • García-Tíscar, Jorge|||0000-0003-4934-4587
[EN] Surface air-cooled oil coolers (SACOC) are being used in the aerospace industry. This device is a passive heat exchanger used to dissipate a large amount of heat from the oil circuit of a turbofan engine to its secondary flow with minimal impact on turbofan efficiency. Typically, heat exchangers are formed by parallel fins and it is important to evaluate the interaction between the three-dimensional high-speed flow and the heat exchanger. The characterization of these devices is usually performed in custom wind tunnels. In addition, it can be done through numerical simulations that include the solution of the fluid equations in the flow field and a conjugate thermal problem. The benefit of using numerical methods, once validated, is that it allows a complete and computationally affordable analysis of the aerothermal performance of the SACOC. This work includes a comparison between numerical and experimental results in terms of pressures and temperatures to achieve a complete characterization, thus demonstrating the capability of the numerical model to obtain accurate results and allowing a better understanding of the physical phenomenon., This project has received funding from Clean Sky 2 Joint Undertaking under the European Union s Horizon 2020 research and innovation programme under grant agreement No 831977 Aerodynamic upgrade of Surface Air-Cooled Oil Coolers (SACOC). Leo M. González acknowledges the financial support from the Spanish Ministry of Science, Innovation and Universities (MCIU) under grant RTI2018-096791-BC21 Hidrodinámica de elementos de amortiguamiento del movimiento de aerogeneradores flotantes. A. Felgueroso is supported through the Programa de Apoyo para la Investigación &#119910; Desarrollo of the Universitat Politècnica de València under grant PAID-01-20 n&#9702; 21589.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Exploiting neural networks Bit-level redundancy to mitigate the impact of faults at inference

  • Catalán-Gallach, Izan|||0000-0001-7993-433X
  • Flich Cardo, José
  • Hernández Luz, Carles|||0000-0003-1192-6223
[EN] Neural networks are widely used in critical environments such as healthcare, autonomous vehicles, or video surveillance. To ensure the safety of the systems that rely on their functionality, it is essential to validate their correct behaviour in the presence of faults. This paper studies the behaviour of state-of-the-art neural network models with fault injection in their weights. For this purpose, we analyse the sensitivity of these models and identify the impact of bit flips on their accuracy. To mitigate the effects of faults, we introduce two mechanisms that leverage bit-level redundancy for protection. The first mechanism, Fixed Protection, safeguards consecutive sets of bits, while the second, Variable Protection, targets non-consecutive bits. Our findings demonstrate that, on average, random bit flip faults cause the accuracy of the original models to drop by 1.3% to over 3%. However, with our protection mechanisms in place, accuracy reductions are significantly minimised, ranging from only 0.0001% to 0.4%., This article has been made possible thanks to the Grant "BECA FPU PROGRAMA PROPIO DE LA UNIVERSITAT POLITECNICA DE VALENCIA - SUBPROGRAMA 1 (PAID-01-20)" No. 20210037. Carles Hernandez is partially supported by the Spanish Ministry of Science, Innovation and Universities under "Ramon y Cajal", fellowship No. RYC2020-030685-I. In addition, this work has received funding from the Valencian government project "IFAC: Implementing Fault-Tolerant Autonomous Computers (CISEJI/2022/30)", and from the Chips Joint Undertaking project EdgeAITrust no. 101139892 and the Spanish Agencia Estatal de Investigacion PCI2024-155056-2 grant. Funding for open access charge: CRUE-Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Introducing memory to a family of multi-step multidimensional iterative methods with weight function

  • Cordero Barbero, Alicia|||0000-0002-7462-9173
  • Torregrosa Sánchez, Juan Ramón|||0000-0002-9893-0761
  • Triguero-Navarro, Paula|||0000-0002-7319-9992
  • Villalba, Eva G.
[EN] In this paper, we construct a derivative-free multi-step iterative scheme based on Steffensen's method. To avoid excessively increasing the number of functional evaluations and, at the same time, to increase the order of convergence, we freeze the divided differences used from the second step and use a weight function on already evaluated operators. Therefore, we define a family of multi-step methods with convergence order 2m, where m is the number of steps, free of derivatives, with several parameters and with dynamic behaviour, in some cases, similar to Steffensen's method. In addition, we study how to increase the convergence order of the defined family by introducing memory in two different ways: using the usual divided differences and the Kurchatov divided differences. We perform some numerical experiments to see the behaviour of the proposed family and suggest different weight functions to visualize with dynamical planes in some cases the dynamical behaviour., This research was partially supported by Universitat Politècnica de València Contrato Predoctoral, Spain PAID-01-20-17 (UPV) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Development and Characterization of Polylactide Blends with Improved Toughness by Reactive Extrusion with Lactic Acid Oligomers

  • Tejada-Oliveros, Ramón
  • Fiori, Stefano
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Lascano-Aimacaña, Diego Sebastián|||0000-0002-0996-1946
  • Montanes, Nestor|||0000-0001-6070-127X
  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
  • Garcia-Sanoguera, David|||0000-0002-1923-9519
This research is a part of the grant PID2020-116496RB-C22 funded by MCIN/AEI/10.13039/ 501100011033, and the grant number AICO/2021/025 funded by Generalitat Valenciana-GVA. R.T.-O. wishes to thank UPV for the grant received though the PAID-01-20 program. J.G.-C. wishes to thank grant FPU20/01732 funded by MCIN/AEI/ 10.13039/501100011033 and by ESF Investing in your future. Microscopy Services at UPV are also acknowledged for their help in collecting and analysing images.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Development and characterization of high environmental performance composites of Bio-PBSA and short hemp fibers from different compatibilization strategies, Desarrollo y caracterización de compuestos de alto rendimiento medioambiental de Bio-PBSA y fibras cortas de cáñamo a partir de diferentes estrategias de compatibilización

  • Tejada-Oliveros, Ramón
  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
  • Garcia-Sanoguera, David|||0000-0002-1923-9519
  • Montanes, Nestor|||0000-0001-6070-127X
  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
[EN] In this research work, the effect of various compatibilizing agents on naturally sourced composites formed from poly(butylene succinate-co-adipate) - PBSA and short hemp fibers has been analyzed. Hemp has been employed as a natural reinforcement to obtain environmentally friendly composites, using biobased PBSA as a matrix. These composites were obtained from twin-screw extrusion and shaped by injection molding. To improve the poor compatibility between the matrix and lignocellulosic fibers, different compatibilizing agents were used, including a maleic anhydride graft copolymer (PBSA-g-MA), a copolymer based on itaconic acid (PBSA-g-IA) and dibutyl itaconate (DBI). The addition of these compatibilizers provided different levels of improvement with respect to the PBSA/hemp base compound. In relation to the mechanical properties, the addition of the copolymers significantly increased the maximum tensile stress, with values around 20 MPa, with respect to the 8,86 MPa of the PBSA/hemp uncompatibilized composite. The addition of DBI to the base blend led to an improvement in the elongation at break of 82% (3,51% elongation at break of the base blend versus 6,40% with the addition of DBI). These results are in agreement with those obtained in dynamic mechanical thermal analysis (DMTA), where the incorporation of hemp fibers and the combination of the different compatibilizers resulted in an improvement in stiffness over the entire temperature range., Los autores agradecen la financiación otorgada gracias al proyecto con número de subvención PID2020-116496RB-C22 financiado por el Ministerio de Ciencia e Innovación MCIN/AEI/10.13039/501100011033 y número de subvención AICO/2021/025 financiado por la Generalitat Valenciana. R. T.-O. quiere agradecer a la UPV la subvención recibida a través del programa PAID-01-20. J. I.-M. quiere agradecer la beca FPU19/01759 financiada por MCIN/AEI/10.13039/501100011033 y por el FSE Invierte en tu futuro.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Integrated Microwave Photonics Coherent Processor for Massive-MIMO Systems in Wireless Communications

  • Martínez-Carrasco-Romero, Pablo|||0000-0003-3771-590X
  • Rausell-Campo, Jose Roberto|||0000-0002-6710-4766
  • Pérez-Galacho, Diego
  • Li, Xu
  • Qing, Ting
  • Pérez-López, Daniel
  • Wang, Tiangxiang
[EN] Massive-MIMO systems can achieve high capacities and data rates by increasing the number of operational antennas in the base station. As more antenna elements are introduced, the complexity of the signal processing operations increases accordingly and current electronic processors struggle to reach those requirements. To overcome these hurdles, we propose a novel theory to process the RF signals in the optical domain. We experimentally demonstrate the capabilities of theory using a non-integrated Dual Parallel Modulator as a 2×2 optical matrix multiplier, recovering satisfactorily previously mixed RF signals modulated following the standards in 5G communications. Finally, we propose an integrated photonic architecture based on a core of Mach Zehnder Interferometers to physically process the information. Together with the optical core, we proposed the integration of RF modulators, microwave photonic filters and high-speed photodetectors.We present simulations on the expected performance of the circuit and analyze the impact of fabrication errors., The work of Jose Roberto Rausell-Campo was supported by the Polythecnic University of Valencia through FPI-UPV Program under Grant PAID-01-20-24. This work was supported by the UPV-Huawei Wireless Joint Innovation Center Agreement under Project YBN2020095120.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of BoNT/A in the Surface Electromyographic Characteristics of the Pelvic Floor Muscles for the Treatment of Chronic Pelvic Pain

  • Albaladejo-Belmonte, Mónica
  • Nohales-Alfonso, Francisco J.
  • Tarazona-Motes, Marta
  • De-Arriba, Maria
  • Alberola-Rubio, José
  • Garcia-Casado, Javier|||0000-0003-1410-2721
[EN] Chronic pelvic pain (CPP) is a complex condition with a high economic and social burden. Although it is usually treated with botulinum neurotoxin type A (BoNT/A) injected into the pelvic floor muscles (PFM), its effect on their electrophysiological condition is unknown. In this study, 24 CPP patients were treated with BoNT/A. Surface electromyographic signals (sEMG) were recorded at Weeks 0 (infiltration), 8, 12 and 24 from the infiltrated, non-infiltrated, upper and lower PFM. The sEMG of 24 healthy women was also recorded for comparison. Four parameters were computed: root mean square (RMS), median frequency (MDF), Dimitrov¿s index (DI) and sample entropy (SampEn). An index of pelvic electrophysiological impairment (IPEI) was also defined with respect to the healthy condition. Before treatment, the CPP and healthy parameters of almost all PFM sides were significantly different. Post-treatment, there was a significant reduction in power (<RMS), a shift towards higher frequencies (>MDF), lower fatigue index (<DI) and increased information complexity (>SampEn) in all sites in patients, mainly during PFM contractions, which brought their electrophysiological condition closer to that of healthy women (<IPEI). sEMG can be used to assess the PFM electrophysiological condition of CPP patients and the effects of therapies such as BoNT/A infiltration., This study was funded by Universitat Politecnica de Valencia in Programa de Ayudas de Investigacion y Desarrollo (PAID-01-20), ISCIII, MCIU, VLC Campus in Convocatoria Ayudas: UPV-La Fe (INBIO): 2016 SPEHG (ID:C18), 2019 sEMG_BONTAv (ID:C06) and funds from private contracts with Merz Pharmaceuticals GmbH S.L.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Dynamic evolution of transient receptor potential vanilloid (TRPV) ion channel family with numerous gene duplications and losses

  • MORINI, MARINA
  • Bergqvist, Christina A.
  • Larhammar, Dan
  • Dufour, Sylvie
  • Asturiano, Juan F.|||0000-0002-6441-5294
[EN] The transient receptor potential vanilloid (TRPV) ion channel family is involved in multiple sensory and physiological functions including thermosensing and temperature-dependent neuroendocrine regulation. The objective of the present study was to investigate the number, origin and evolution of TRPV genes in metazoans, with special focus on the impact of the vertebrate whole-genome duplications (WGD). Gene searches followed by phylogenetic and synteny analyses revealed multiple previously undescribed TRPV genes. The common ancestor of Cnidaria and Bilateria had three TRPV genes that became four in the deuterostome ancestor. Two of these were lost in the vertebrate ancestor. The remaining two genes gave rise to two TRPV subfamilies in vertebrates, consisting of subtypes 1, 2, 3, 4, 9 and 5, 6, 7, 8, respectively. This gene expansion resulted from the two basal vertebrate WGD events (1R and 2R) and three local duplications before the radiation of gnathostomes. TRPV1, 4 and 5 have been retained in all gnathostomes investigated, presumably reflecting important functions. TRPV7 and 8 have been lost independently in various lineages but are still retained in cyclostomes, actinistians (coelacanth), amphibians, prototherians and basal actinopterygians (Polypteridae). TRPV3 and 9 are present in extant elasmobranchs, while TRPV9 was lost in the osteichthyan ancestor and TRPV3 in the actinopterygian ancestor. The coelacanth has retained the ancestral osteichthyan repertoire of TRPV1, 3, 4, 5, 7 and 8. TRPV2 arose in the tetrapod ancestor. Duplications of TRPV5 occurred independently in various lineages, such as cyclostomes, chondrichthyans, anuran amphibians, sauropsids, mammals (where the duplicate is called TRPV6), and actinopterygians (Polypteridae and Esocidae). After the teleost-specific WGD (3R) only TRPV1 retained its duplicate, whereas TRPV4 and 5 remained as single genes. Both 3R-paralogs of TRPV1 were kept in some teleost species, while one paralog was lost in others. The salmonid-specific WGD (4R) duplicated TRPV1, 4, and 5 leading to six TRPV genes. The largest number was found in Xenopus tropicalis with no less than 15 TRPV genes. This study provides a comprehensive evolutionary scenario for the vertebrate TRPV family, revealing additional TRPV types and proposing a phylogeny-based classification of TRPV across metazoans., MM is a recipient of France-Spain bilateral postdoctoral fellowship APOSTD (APOSTD/2020/053) from the Generalitat Valenciana and the European community. JA has funding from Spanish MICIU (Project EELGONIA; RTI2018-096413-B-I00). DL has funding from the Swedish Research Council and the Swedish Brain Foundation. SD has funding from MNHN and CNRS.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Optical multi-trapping by Kinoform m-Bonacci lenses

  • Muñoz-Pérez, Francisco M.
  • Furlan, Walter D.
  • Ferrando, Vicente|||0000-0002-7434-7109
  • Monsoriu Serra, Juan Antonio|||0000-0003-3350-7951
  • Arias-Gonzalez, J. R.|||0000-0001-6802-0874
[EN] Optical manipulation is interfacing disciplines in the micro and nanoscale, from molecular biology to quantum computation. Versatile solutions for increasingly more sophisticated technological applications require multiple traps with which to maneuver dynamically several particles in three dimensions. The axial direction is usually overlooked due to difficulties in observing particles away from an objective-lens focal plane, a normal element in optical tweezers, and in managing interparticle distances along the trapping beam propagating direction, where strong radiation pressure and shadowing effects compromise the simultaneous and stable confinement of the particles. Here, aperiodic kinoform diffractive lens based on the m-Bonacci sequence are proposed as a newtrapping strategy. This lens provides split first-order diffractive foci whose separation depends on the generalized m-golden ratio. We show the extended manipulation capabilities of a laser tweezers system generated by these lens, in which concomitant trapping of particles in different focal planes takes place. Positioning particles in the axial direction with computer-controlled distances allows dynamic three-dimensional all-optical lattices, useful in a variety of microscale and nanoscale applications. (C) 2022 Optica Publishing Group under the terms of the Optica Open Access Publishing Agreement, Ministerio de Ciencia e Innovacion (PID2019-107391RB-I00); Generalitat Valenciana (PROMETEO/2019/048); Universitat Politecnica de Valencia (PAID-01-20-25).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Using osmotic pumps to induce sexual maturation in male and female European eels

  • Blanes-García, M.
  • García-Salinas, Pablo
  • MORINI, MARINA
  • Pérez Igualada, Luz María|||0000-0002-6678-7446
  • Asturiano, Juan F.|||0000-0002-6441-5294
  • Gallego Albiach, Victor|||0000-0002-9733-0625
[EN] Simple Summary The European eel is a species with high commercial value for aquaculture, and it has suffered a drastic reduction of its natural stocks during the last decades; thus, breeding in captivity is nowadays considered essential to avoid the extinction of the species. In this sense, a new method to maturate the European eel (males and females) for eel aquaculture has been studied. For the first time in the European eel, a controlled release hormone system (osmotic pumps) has been tested, which allowed to induce the testis maturation and sperm production in part of the males as well as a very early maturation and ovulation in the females. The European eel (Anguilla anguilla) is a commercially valued species for aquaculture. Over the past decades, it has experienced a drastic reduction in its natural stocks. Thus, breeding in captivity is considered essential, nowadays, to guarantee the eel aquaculture and to reduce pressure on natural populations. Traditionally, the European eel has been sexually matured by means of weekly hormonal injections, which cause stress to the fish. The purpose of this research study was to assess the use of osmotic pumps as a new method to induce sexual maturation in male and female European eels, without the weekly injection. The control groups were treated with weekly hormone injections (recombinant human chorionic gonadotropin for males and carp pituitary extract for females), and the implanted groups were treated with osmotic pumps (ALZET(R) osmotic pumps) loaded with the respective hormones. Regarding male European eels, this study shows that the use of controlled release systems was able to induce the maturation and spermiation, but without the necessary capacity to produce enough gametes with acceptable quality parameters that could meet the needs of a commercial eel hatchery. Concerning female European eels, the study demonstrates that the use of osmotic pumps loaded with CPE became an effective method, generating early maturations (4 to 10 weeks) in 50% of the females, so this method could become a viable alternative for eel hatchery procedures., This research was funded by "Ayuda a Primeros Proyectos de Investigacion (PAID-06-18), Vicerrectorado de Investigacion, Innovacion y Transferencia de la Universitat Politecnica de Valencia (UPV) Valencia, Spain". V.G. and M.M. have postdoc grants from the MICIU (IJCI-2017-34200) and the Generalitat Valenciana (APOSTD/2020/053), respectively. P.G.-S. and M.B.-G. have Ph.D. grants from the European Union through the Operational Program of the European Social Fund (ESF) of the Comunitat Valenciana 2014-2020 (ACIF/2018/147) and from the Universitat Politecnica de Valencia (PAID-01-20), respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

La ciudad de los cuidados. Infraestructura para un arte en común, The caring city. Infrastructure for an art in common

  • Ferriols-Montañana, Ana
  • Santiago Martin de Madrid, Paula|||0000-0001-7170-9007
[ES] Este artículo propone la teoría del cuidado como medio para la creación de infraestructuras de sustento en los modelos comunes. Se aborda la manera en la que los espacios comunes en la urbe proporcionan contexto y soporte para una creación artística alternativa. Para ello se realiza un análisis de los diferentes modelos, privado, público y común, en relación a la creación del espacio urbano y se identifican sus posibilidades de relación entre ellos. La teoría del cuidado se plantea como la metodología que prima en la gestión de los comunes al proponer una reivindicación de las labores reproductivas y de sostenimiento. A partir del estudio de varios proyectos, este artículo establece una clasificación de dos tipologías de intersección entre práctica artística contemporánea y espacios comunes, separando los proyectos artísticos que se constituyen como comunes, de los espacios comunes que ofrecen una infraestructura para la creación. También se analiza la relación que los proyectos analizados mantienen con el sistema público, desde la no interacción entre ambos, hasta la subvención de recursos. El objetivo de este análisis es el de mostrar la capacidad que los comunes proporcionan como infraestructura relacional y material para la creación artística., [EN] This article proposes that the creation of common infrastructures can be based on care theory. It addresses the way in which common spaces in the city provide context and backing for an alternative artistic creation. In order to do this, an analysis of the private, public and common models is carried out in relation to the creation of urban space. It is also approached an identification of relationship possibilities between each model. The theory of care is proposed as the methodology that prevails in the management of the commons since it entails a vindication of reproductive work. Based on the study of several projects, this article establishes a classification of two types of intersection between contemporary artistic practice and common spaces. Dividing the artistic projects that are constituted as commons, from the common spaces that offer an infrastructure for creation. The relationship that these projects maintain with the public system is also analysed, from non-interaction relationship to a subsidy of resources. The aim of the article is also to show the capacity of commons as a provider of relational and material infrastructures for artistic creation., Esta investigación ha sido realizada en el marco de los proyectos: Arte en Entornos Periféricos. de la Función Estética a la Dimensión Pública. (PGC2018-094351-B-C44-AR) (01/01/19 - 01/01/23), financiado por la Agencia Estatal de Investigación del Gobierno de España; y Humanidades Ecológicas y Transiciones Ecosociales. Propuestas Éticas, Estéticas y Pedagógicas para el Antropoceno. (PID2019-107757RB-I00) (01/06/20 - 01/06/23), financiado por la Agencia Estatal de Investigación del Gobierno de España. Se inscribe también en el marco de financiación del Programa de Ayudas de Investigación y Desarrollo (PAID-01-20) de la Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Iterative schemes for finding all roots simultaneously of nonlinear equations

  • Cordero Barbero, Alicia|||0000-0002-7462-9173
  • Garrido-Saez, Neus|||0000-0002-7903-8591
  • Torregrosa Sánchez, Juan Ramón|||0000-0002-9893-0761
  • Triguero-Navarro, Paula|||0000-0002-7319-9992
[EN] In this paper, we propose a procedure that can be added to any iterative scheme in order to turn it into an iterative method for approximating all roots simultaneously of any nonlinear equations. By applying this procedure to any iterative method of order p, we obtain a new scheme of order of convergence 2p. Some numerical tests allow us to confirm the theoretical results and to compare the proposed schemes with other known methods for simultaneous roots of polynomial and non-polynomial functions., This research was partially supported by Grant PGC2018-095896-B-C22, funded by MCIN/AEI/10.13039/5011000113033 by " ERDF A way of making Europe", European Union, also by the internal research project Grant ADMIREN, Universidad Internacional de La Rioja (UNIR), Spain and by Contrato Predoctoral, Universitat Politecnica de Valencia, Spain PAID-01-20-17 (UPV) and Ayuda Movilidad Estancia Doctorado, Universitat Politecnica de Valencia, Spain 01/10/2021.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Triiodide Faujasites With Reactive, Ionic, Antimicrobial, and Catalytic Applications

  • Mingueza-Verdejo, Paloma
  • Minguez-Avellan, Miriam
  • Hernandez-Garrido, Juan C.
  • Balaguer-Grau, Adrián
  • Boix, Pablo P.|||0000-0001-9518-7549
  • Oliver-Meseguer, Judit|||0000-0003-1555-3583
  • Leyva Perez, Antonio|||0000-0003-1063-5811
[EN] Zeolites are microporous materials widely used in industry for hosting and exchanging molecules and cations, but the inclusion of anions is severely limited by the anionic nature of the zeolitic framework. Here, we show that commercially available alkyl iodides and faujasite zeolites (one of the representative zeolite families) react in a tandem dehydroiodination-oxidation process under open-air reaction conditions, to give triiodide anions (I3 -) inside the faujasite (I3 -@faujasite), after releasing the corresponding alkene of the alkyl iodide and water as only by-products. This clean postsynthetic solid reaction does not employ any additive, solvent, or protecting atmosphere and can be carried out in multigram scale, to obtain up to approximate to 25 wt% I3 - loadings inside the zeolites, bench stable for months. The I3 -@faujasites are studied here as water disinfection agents, bacteria and yeast antiseptics, solid electrolytes, and catalytic solids, and, in many cases, outperform the activity of the state-of-the-art materials for each application. Besides, the densely packaged I3 -@NaX does not disaggregate into hydrofluoric acid, which allows the stability of this zeolite in strong acidic media. This conceptually different anion incorporation methodology in faujasites open new avenues to the design of anion-containing microporous zeolitic materials, with controlled release if desired, for a wide variety of applications., This study was supported by the Ministerio de Ciencia, Innovacion y Universidades (PID2023-148441NB-I00, CEX2021-001230-S, RYC2022-036154-I, PRE2021-099951, PID2020-119628RB-C31) and Universitat Politecnica de Valencia (PAID 01-20).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

GB_SynP: A Modular dCas9-Regulated Synthetic Promoter Collection for Fine-Tuned Recombinant Gene Expressionin Plants

  • Moreno-Giménez, Elena
  • Selma, Sara
  • Calvache-Román, Camilo Alberto
  • Orzáez Calatayud, Diego Vicente
[EN] Programmable transcriptional factors based on the CRISPR architecture are becoming commonly used in plants for endogenous gene regulation. In plants, a potent CRISPR tool for gene induction is the so-called dCasEV2.1 activation system, which has shown remarkable genome-wide specificity combined with a strong activation capacity. To explore the ability of dCasEV2.1 to act as a transactivator for orthogonal synthetic promoters, a collection of DNA parts was created (GB_SynP) for combinatorial synthetic promoter building. The collection includes (i) minimal promoter parts with the TATA box and 5'UTR regions, (ii) proximal parts containing single or multiple copies of the target sequence for the gRNA, thus functioning as regulatory cis boxes, and (iii) sequence-randomized distal parts that ensure the adequate length of the resulting promoter. A total of 35 promoters were assembled using the GB_SynP collection, showing in all cases minimal background and predictable activation levels depending on the proximal parts used. GB_SynP was also employed in a combinatorial expression analysis of an autoluminescence pathway in Nicotiana benthamiana, showing the value of this tool in extracting important biological information such as the determination of the limiting steps in an enzymatic pathway., This work was funded by Era-CoBiotech SUSPHIRE (PCI2018-092893) and PID2019-108203RB-I00 Plan Nacional I+D, Spanish Ministry of Economy and Competitiveness. E.M.-G. and S.S. acknowledge support by a FPU (FPU18/02019) and a FPI (BIO2016-78601-R) H2020 Research Program: 760331 Newcotiana fellowships, respectively, from the Spanish Ministry of Science, Innovation and Universities. C.C. acknowledges support by a FPI-UPV (PAID-01-20) fellowship from Universitat Politecnica de Valencia. The authors would like to thank Dr. Lynne Yenush for her assistance with the manuscript preparation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Characterization of potential spermatogonia biomarker genes in the European eel (Anguilla anguilla)

  • Blanes-García, Marta
  • Marinovic, Zoran
  • Herranz-Jusdado, Juan Germán
  • Xie, Xuan
  • Ferrão, Leonor
  • Horváth, Ákos
  • Psenicka, Martin
  • Morini, Marina
  • Gallego Albiach, Victor|||0000-0002-9733-0625
  • Pérez Igualada, Luz María|||0000-0002-6678-7446
  • Asturiano, Juan F.|||0000-0002-6441-5294
  • Baloch, Abdul Rasheed
[EN] Identification of specific molecular markers for spermatogonial stem cells in teleost is crucial for enhancing the efficacy of reproductive biotechnologies in aquaculture, such as transplantation and surrogate production in fishes. Since it is not yet possible to distinguish spermatogonial stem cells of European eel (Anguilla anguilla) using specific molecular markers, we isolated spermatogonial cells from immature European eels to find these potential markers. We attempted this by studying three candidate genes: vasa, nanos2, and dnd1. Two vasa (vasa1 and vasa2) genes, nanos2, and dnd1 were identified, characterized, and studied in the muscle, testis, and isolated spermatogonia. Our results showed that vasa1 and vasa2 had the highest levels of expression when measured by qPCR. In situ hybridization and immunochemistry assays showed that the four genes were localized explicitly in type A spermatogonia. However, vasa1 and vasa2 exhibited stronger signals in the immature testicular tissue than the other two potential markers. According to this, vasa1 and vasa2 were found to be the most effective markers for spermatogonial cells in the European eel., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. Funded by the European Union s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement Nº 642893 (IMPRESS; including the JGHJ and ARB predoctoral contracts), and by the Ministerio de Ciencia e Innovación y Universidades (Project EELGONIA; RTI2018-096413-BI00). MBG and LF have PhD contracts from the UPV (PAID01 20) and GVA (GRISOLIAP/2020/063), respectively. VG joined a grant RYC2021-031558-I funded by MCIN/AEI/10.13039/501100011033, and by European Union NextGenerationEU/PRTR. MM has a postdoc contract supported byMCIN/AEI/10.13039/501100011033 funded by European Union NextGenerationEU/PRTR (C17.I1) and by Generalitat Valenciana (THINKINAZUL/2021/012) to SEASPERM. MP was fnancially supported by the Ministry of Education, Youth and Sports of the Czech Republic project CENAKVA (LM2018099) and Biodiversity (CZ.02.1.01/0.0/0.0/16_025/0007370), and the Czech Science Foundation (grant number 22-31141 J)). ZM and ÁH were supported by the Ministry of Innovation and Technology within the framework of the Thematic Excellence Programme 2020, National Challenges Subprogramme (TKP2020-NKA-16) as well as the NKFIH K138425 and FK 142933 projects. Funding for open access charge: CRUE-Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Superoxidase dismutases (SODs) in the European eel: Gene characterization, expression response to temperature combined with hormonal maturation and possible migratory implications

  • Ferrão, Leonor
  • Blanes-García, Marta
  • Morini, Marina
  • Pérez Igualada, Luz María|||0000-0002-6678-7446
  • Asturiano, Juan F.|||0000-0002-6441-5294
[EN] Superoxide dismutases (SODs) are antioxidant enzymes that protect cells from oxidation. Three SODs have been identified in mammals, but there is limited information in teleosts. This study investigates SODs in the European eel and their expression patterns during testis maturation. Phylogenetic and synteny analyses revealed SODs paralogs and their evolution in vertebrates. The eel possesses one SOD1 and two SOD2/3 (a and b), indicating SOD2 and SOD3 duplication in elopomorphs. SODs expression were then evaluated in various male and female tissues. SOD1 is more expressed in females, while SOD2a and SOD2b dominate brain-pituitary-gonad tissues in both sexes. SOD3a showed predominant expression in the ovary and the male livers, whereas SOD3b was found in the pituitary and brain of both sexes. The effects of different maturation protocols (standard hormonal treatment vs. same protocol preceded with cold seawater pre-treatment) on SODs expression during testis maturation were evaluated. Salinity increase at the onset of standard treatment at 20 ¿C, simulating early migration, upregulated SOD1, SOD2a, and SOD2b, coinciding with spermatogonia type A differentiated cells dominance. Thereafter, SOD2a and SOD3a decreased, while SOD2b increased during hormonal treatment- induced spermatogenesis. Pre-treatment with seawater at 10 ¿C, mimicking the conditions at the beginning of the seawater migration, downregulated SOD1 but increased SOD3a expression. Finally, the standard hormonal treatment, replicating spawning at higher temperatures, downregulated SOD1 in eels without any pre-treatment while SOD2a expression increased in pre-treated eels. This study revealed tissue-specific, sex-dependent, and maturation-related SOD expression patterns, predicting SODs dynamic expression profiles during their reproductive migration., This study received funding from the Spanish MICIU (Project EELGONIA; RTI2018-096413-B-I00). LF has a predoctoral contract funded by the Generalitat Valenciana, Programa Grisolía (GRISOLIAP/2020/063). MBG has a predoctoral contract from the Universitat Politecnica de Valencia (PAID-01-20). MM had a postdoctoral contract funded by the Generalitat Valenciana (APOSTD/2020/053). Funding for open access charge: CRUE-Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Simultaneous roots for vectorial problems

  • Chinesta, Francisco
  • Cordero Barbero, Alicia|||0000-0002-7462-9173
  • Garrido-Saez, Neus|||0000-0002-7903-8591
  • Torregrosa Sánchez, Juan Ramón|||0000-0002-9893-0761
  • Triguero-Navarro, Paula|||0000-0002-7319-9992
[EN] In this manuscript, we design an iterative step that can be added to any numerical process for solving systems of nonlinear equations. By means of this addition, the resulting iterative scheme obtains, simultaneously, all the solutions to the vectorial problem. Moreover, the order of this new iterative procedure duplicates that of their original partner. We apply this step to some known methods and analyse the behaviour of these new algorithms, obtaining simultaneously the roots of several nonlinear systems., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This research was partially supported by Universitat Politècnica de València, Ayuda Movilidad Estancia Doctorado 01/10/2021 and Universitat Politècnica de València Contrato Predoctoral PAID-01-20-17 (UPV).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Automatic Segmentation of the Retinal Nerve Fiber Layer by Means of Mathematical Morphology and Deformable Models in 2D Optical Coherence Tomography Imaging

  • Berenguer-Vidal, Rafael
  • Verdú-Monedero, Rafael
  • Morales-Sánchez, Juan
  • Sellés-Navarro, Inmaculada
  • García-Pardo, José Gabriel
  • del Amor, Rocío
  • Naranjo Ornedo, Valeriana|||0000-0002-0181-3412
[EN] Glaucoma is a neurodegenerative disease process that leads to progressive damage of the optic nerve to produce visual impairment and blindness. Spectral-domain OCT technology enables peripapillary circular scans of the retina and the measurement of the thickness of the retinal nerve fiber layer (RNFL) for the assessment of the disease status or progression in glaucoma patients. This paper describes a new approach to segment and measure the retinal nerve fiber layer in peripapillary OCT images. The proposed method consists of two stages. In the first one, morphological operators robustly detect the coarse location of the layer boundaries, despite the speckle noise and diverse artifacts in the OCT image. In the second stage, deformable models are initialized with the results of the previous stage to perform a fine segmentation of the boundaries, providing an accurate measurement of the entire RNFL. The results of the RNFL segmentation were qualitatively assessed by ophthalmologists, and the measurements of the thickness of the RNFL were quantitatively compared with those provided by the OCT inbuilt software as well as the state-of-the-art methods., This work was partially funded by Spanish National projects AES2017-PI17/00771 and AES2017-PI17/00821 (Instituto de Salud Carlos III), PID2019-105142RB-C21 (AI4SKIN) (Spanish Ministry of Economy and Competitiveness), PTA2017-14610-I (State Research Spanish Agency), regional project 20901/PI/18 (Fundacion Seneca) and Polytechnic University of Valencia (PAID-01-20).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Toward surrogate-based conservation: Preservation of European eel (Anguilla anguilla) spermatogonial stem cells

  • Marinovic, Zoran
  • Blanes-García, Marta
  • Scekic, Ilija
  • Lujic, Jelena
  • Balogh, Reka Eniko
  • Ferrao, Leonor
  • Morini, Marina
  • Toth, Vilmos
  • Urbanyi, Bela
  • Kobolak, Julianna
  • Horvath, Akos
  • Asturiano, Juan F.|||0000-0002-6441-5294
[EN] In this study, we optimized cryopreservation and hypothermic storage protocols for the European eel (Anguilla anguilla) spermatogonial stem cells (SSCs). As the European eel is listed as a critically endangered fish species on the IUCN red list, there is a strong need to develop and advance ex situ conservation strategies beyond the current conservation measures. Cryopreservation of SSCs was done through freezing and vitrification of testicular tissue pieces. Freezing was optimized through five sequential experiments and has yielded SSC post-thaw viability above 50%. The physiological competence of frozen/thawed cells was tested by transplanting donor-derived testicular cells into sterilized common carp larvae. After two months, gonads of 32% of the recipients displayed a positive fluorescent signal indicating that frozen/thawed cells retained physiological competence. Needle-immersed vitrification was optimized by testing different equilibration and vitrification solutions. SSCs displayed viability rates above 70% after protocol optimization. Hypothermic storage experiments displayed that storage of isolated testicular cells is more favorable than storing testicular tissue pieces, and that there was no significant reduction of SSC viability for 6 days when storing them in testicular cell suspension. Results obtained in this study are the first validated protocols for SSC preservation in the European eel and present the foundation for biobanking and future development of surrogate-based ex situ conservation programs for this and phylogenetically-related eel species., The study was supported by the National Research, Development, and Innovation Office of Hungary (grants K138425 to AH and FK142933 to ZM) , the Research Excellence Programme, and the Flagship Research Groups Programme of the Hungarian University of Agriculture and Life Sciences (grants to ZM and AH) . This study has been supported by the Project PROMETEO 2025 "Climate Change, Reproduction and Conservation of Aquatic Species in the Mediterranean Ecosystems (CLIMEDREP)" funded by the Conselleria de Educacion, Cultura, Universidades y Empleo of Generalitat Valenciana (CIPROM/2024/2) . MBG received a predoctoral contract from the Universitat Politecnica de Valencia (grant PAID-01-20) to carry out her thesis. VT was supported by the Hungarian Academy of Sciences (NAP3.0 Program NAP2022-I-3/2022) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

GBDM+: an improved methodology for a GNSS-based distance meter

  • Baselga Moreno, Sergio|||0000-0002-0492-4003
  • García-Asenjo Villamayor, Luis|||0000-0001-6535-2216
  • Garrigues Talens, Pascual
  • Luján, Raquel
[EN] The determination of distances consistent with the definition of the base unit of length in the International System of Units (SI), the SI meter, with uncertainties of less than 1 ppm up to 5 km in the open air is a current challenge that is being increasingly required for different applications, including the determination of local ties, calibration baselines, and high precision geodetic metrology in singular scientific and engineering projects. The required knowledge of the index of refraction of the propagating medium at the same level of 1 ppm is a hard limit to the use of precise electronic distance meters (EDMs), which has motivated the recent development of new two-color, refractivity compensated, EDM prototypes. As an alternative, the use of global navigation satellite systems (GNSS) could benefit from their high scale stability although the lack of appropriate estimation of the uncertainties in their sources of error and their unknown propagation into the final result during the data processing has prevented a rigorous uncertainty analysis and, therefore, the use of GNSS for absolute distance determination. Stemming from our initial methodology for a GNSS-based distance meter (GBDM) that was restricted to relatively horizontal baselines and distances up to 1 km only, we have improved the method so that its application range is extended to baselines of up to 5 km with a possibly significant height difference so that it provides the final baseline distance with the corresponding uncertainty derived from the uncertainties in the different error sources rigorously propagated through the equations by which the distance is finally determined. This improved methodology, named as GBDM+, constitutes a significant step forward in the application of GNSS to open air length metrology., The work leading to this paper was performed within the 18SIB01 GeoMetre project of the European Metrology Programme for Innovation and Research (EMPIR). This project has received funding from the EMPIR programme co-financed by the Participating States and from the European Union's Horizon 2020 research and innovation programme, funder ID: 10.13039/100014132. Raquel Lujan acknowledges the funding from the Programa de Ayudas de Investigacion y Desarrollo (PAID-01-20) de la Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

DeepP: Deep Learning Multi-Program Prefetch Configuration for the IBM POWER 8

  • Lurbe-Sempere, Manel
  • Feliu-Pérez, Josué|||0000-0003-3017-4266
  • Petit Martí, Salvador Vicente|||0000-0003-2426-4134
  • Gómez Requena, María Engracia|||0000-0003-1466-4118
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
[EN] Current multi-core processors implement sophisticated hardware prefetchers, that can be configured by application (PID),to improve the system performance. When running multiple applications, each application can present different prefetch requirements,hence different configurations can be used. Setting the optimal prefetch configuration for each application is a complex task since itdoes not only depend on the application characteristics but also on the interference at the shared memory resources (e.g. memorybandwidth). In his paper, we proposeDeepP, a deep learning approach for the IBM POWER8 that identifies at run-time the bestprefetch configuration for each application in a workload. To this end, the neural network predicts the performance of each applicationunder the studied prefetch configurations by using a set of performance events. The prediction accuracy of the network is improvedthanks to a dynamic training methodology that allows learning the impact of dynamic changes of the prefetch configuration onperformance. At run-time, the devised network infers the best prefetch configuration for each application and adjusts it dynamically.Experimental results show that the proposed approach improves performance, on average, by 5,8%, 6,7%, and 15,8% compared tothe default prefetch configuration across different 6-, 8-, and 10-application workloads, respectively., This work was supported in part by Ministerio de Ciencia, Innovacion y Universidades and the European ERDF under Grant RTI2018-098156-B-C51, in part by Generalitat Valenciana under Grant AICO/2021/266, and in part by Ayudas Contratos predoctorales UPV -subprograma 1 (PAID-01-20). The work of Josue Feliu was supported by a Juan de la Cierva Formacion Contract under Grant FJC2018-036021-I.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

On the Equivalence Between Null Space and Orthogonal Space in Latent Variable Regression Modeling

  • García-Carrión, Sergio
  • Francesco Sartori
  • Borràs-Ferrís, Joan
  • Facco, Pierantonio
  • Barolo, Massimiliano
  • Ferrer, Alberto|||0000-0001-7244-5947
[EN] The concepts of null space and orthogonal space have been developed in independent contexts and with different purposes: the former arises in the inversion of partial least-squares (PLS) regression models, and the latter in orthogonal PLS (O-PLS) modeling. In this study, we bridge PLS model inversion and O-PLS modeling by mathematically proving that the null space and the orthogonal space are the same space. We also provide a graphical interpretation of the equivalence between the two spaces, using both a simulated and a real case study., Financial support was granted by the Research and Development Support Program of the UPV (PAID-01-20), and also by the Generalitat Valenciana (AICO/2021/111). Funding for open access charge was provided by CRUE Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Xenotransplantation of European Eel (Anguilla anguilla) Spermatogonia in Zebrafish (Danio rerio) and European Sea Bass (Dicentrarchus labrax)

  • Blanes-García, Marta
  • Marinovic, Zoran
  • Morini, Marina
  • Vergnet, Alain
  • Horváth, Ákos
  • Asturiano, Juan F.|||0000-0002-6441-5294
[EN] The European eel encounters challenges in achieving sexual maturation in captivity, which has been a concern for researchers. This study explores surrogate broodstock technology as an alternative approach for eel production. The present study aimed to evaluate zebrafish and European sea bass as potential recipients for European eel spermatogonia transplantation, given the abundance of eel type A spermatogonia (SPGA). Immature European eel testes were dissected and maintained at 4 °C or cryopreserved. SPGA were obtained by dissociation of fresh or post-thawed tissue, employing an enzymatic solution, and then labelled with fluorescent membrane marker PKH26. SPGA from fresh tissue were transplanted into wild-type zebrafish larvae and triploid European sea bass larvae, while SPGA from cryopreserved testis were transplanted into vasa::egfp transgenic zebrafish larvae. One-and-a-half months post-transplantation (mpt), fluorescent donor cells were not detected in the gonads of zebrafish or European sea bass. Molecular qPCR analyses at 1.5 or 6 mpt did not reveal European eel-specific gene expression in the gonads of any transplanted fish. The findings suggest that the gonadal microenvironments of zebrafish and European sea bass are unsuitable for the development of European eel spermatogonia, highlighting distinctive spermatogonial stem cell migration mechanisms within teleost species, This work was supported by the Spanish Ministry of Science, Innovation and Universities (EELGONIA; RTI2018-096413-B-I00) and the ThinkInAzul Project, supported by the Spanish Ministry of Science and Innovation (MCIN) with funding from the European Union NextGenerationEU (PRTRC17.I1) and the Generalitat Valenciana to SEASPERM (THINKINAZUL/2021/012), including the Marina Morini postdoctoral contract. The study was partially funded by the EU H2020 Research Innovation Program (AQUAEXCEL3.0; grant agreement No. 871108). Marta Blanes-García had a PhD contract from the UPV (PAID-01-20). Zoran Marinovi¿c and Ákos Horváth were supported by the National Research, Development and Innovation Office of Hungary (NKFIH K138425 and FK142933 grants), the National Excellence Program of the Ministry for Culture and Innovation from the source of the National Research, Development and Innovation fund (ÚNKP-23-4-II-MATE-10 grant) and the KKP program of the Hungarian University of Agriculture and Life Sciences, as well as the Flagship Research Groups Programme of the Hungarian University of Agriculture and Life Sciences and the Research Excellence Programme of the Hungarian University of Agriculture and Life Sciences.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Exploring Environmental Risk in Soils: Leveraging Open Data for Non-Sampling Assessment?

  • Aparisi-Navarro, Silvia
  • Candeias, Carla
  • Rocha, Fernando
  • Moncho-Santonja, María|||0000-0001-9520-6981
  • Defez Garcia, Beatriz|||0000-0002-3658-6766
  • Peris Fajarnes, Guillermo|||0000-0001-9215-9091
[EN] Soil contamination by heavy metals (HM) is a critical area of research. Traditional methods involving sample collection and lab analysis are effective but costly and time-consuming. This study explores whether geostatistical analysis with GIS and open data can provide a faster, more precise, and cost-effective alternative for HM contamination assessment without extensive sampling. Concentrations of nine HMs (Cu, Pb, Ni, Co, Mn, As, Cd, Sb, Cr) were analysed from 498 soil samples collected in two mining areas in Portugal: the Panasqueira and Aljustrel mines. Corresponding data were extracted from the Lucas TOPSOIL 1 km raster maps. Several contamination indices, Contamination Factor (Cf), Modified Contamination Degree (mCd), Geoaccumulation Index (Igeo), Nemerow Pollution Index (Pn), Potential Ecological Risk Index (PERI), and Pollution Load Index (PLI) were calculated for both datasets. A confusion matrix was used to evaluate the percentage of correct classifications, while a concordance analysis assessed the alignment of accurately classified points between the two data sources. In the soil samples, very high contamination levels for As were observed in 42% of the samples according to the Cf, with high levels for Sb found in approximately 30% of the samples. The mCd revealed that approximately 11% of soil samples exhibited very high levels of contamination, while the Pn indicated that 78.9% of the soil samples fell within the seriously polluted domain.Similar contamination trends were observed for the other indices. In contrast, the results for the LUCAS points showed significant discrepancies. No high contamination levels were found for any metal. The misclassification rates for mCd, Pn, PERI, and PLI were 84.25%, 97.55%, 95%, and 82%, respectively, when compared to the field data. This study concludes that while open data raster maps offer rapid overviews, they fall short of providing the detailed precision required for reliable contamination assessments. The significant misclassification rates observed highlight the limitations of relying solely on these tools for critical environmental decisions. Consequently, traditional sampling and laboratory analysis remain indispensable for accurate risk assessments of HM contamination, ensuring a more reliable foundation for decision-making and environmental management., This work was supported by Funding for open access charge: Universitat Polit`ecnica de Val`encia". Silvia Aparisi-Navarro was supported by the Research and Development Program (PAID-01-20) of the Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Welfare implications on management strategies for rearing dairy calves: A systematic review. Part 1-feeding management

  • Carulla-Pascual, Patricia
  • Villagrá, Arantxa
  • Blanco-Penedo, Isabel
  • Estellés, F.|||0000-0001-6774-6075
[EN] Introduction: Calves are very susceptible to stress in the early stages of life, and it is necessary to ensure maximum welfare. Feeding management has been identified as a major risk factor for calf health and welfare at this stage. However, the management protocol for calf rearing and its impact on animal welfare is unclear. A systematic review of different management strategies for rearing dairy calves according to the three spheres of animal welfare was conducted using an electronic search strategy. In this review, management strategies were studied to identify scientific gaps, to know the welfare problems of these animals in order to prioritize actions and future research and to study the interpretive approach of this management from the three welfare spheres.Methods: A protocol was used to analyze and extract information from the studies. Of the 1,783 publications screened, only 351 met the inclusion criteria for the management or welfare of calves' items.Results: The publications identified in the search can be divided into two main groups feeding and socialization, based on the main topic of the publication. The main topics that emerged from the search in the feeding management group were milk replacer, colostrum, and weaning, divided into the three main areas of biological functioning and health, natural life and affective states or cognitive judgement.Discussion: The main issues to be addressed were the different types of feed consumed by animals from birth to weaning and the weaning management. It has been found that the most researched issues are colostrum and solid starter feed management. Unresolved issues were highlighted, such as the lack of a clear protocol for the administration of milk replacers to reduce hunger and the best management of weaning to reduce stress., This research was supported by Centro para el Desarrollo Tecnologico Industrial and Cowvet S.L. by project CDTI-IDI-20200936. In addition, PC held a grant from the Ph.D. student's research program of the Universitat Politecnica de Valencia (PAID-01-20). The authors thank the Swedish University of Agricultural Sciences and the Department of Clinical Sciences for facilitating access to databases analyzed in this study.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of Milk-Feeding Frequency and Calcium Gluconate Supplementation on Growth, Health, and Reproductive and Metabolic Features of Holstein Heifers at a Rearing Farm

  • Revilla-Ruiz, Ángel
  • Carulla-Pascual, Patricia
  • Fernandez-Novo, Aitor
  • De Mercado, Eduardo
  • Perez-Navarro, Alejandro
  • Patron-Collantes, Raquel
  • Pérez-Garnelo, Sonia S.
  • González-Martín, Juan V.
  • Villagrá, Arantxa
  • Astiz, Susana
  • Izquierdo Sebastián, Francisco Javier
  • Estellés, F.|||0000-0001-6774-6075
[EN] We compared the effects of milk-feeding in 288 Holstein calves (72 per group) which were fed twice (2F) or thrice (3F) daily, with or without the addition of hydrogenated fat-embedded calcium gluconate (G) supplemented in the starter food and in the daily diet up to the age of 9 months, on the calves' metabolism, growth, health, and reproductive efficiency up to first pregnancy. The calves received 6 L of milk replacer (130 g/L) and had ad libitum access to water and textured calf starter with or without gluconate. Gluconate supplementation promoted a "catch-up" in growth in supplemented calves compared to their counterparts that did not receive gluconate. Gluconate appeared to reduce animal metabolic stress during key events, such as weaning and transfer into open-door pens, reducing fructosamine (352.61 vs. 303.06 in 3FG and 3F, respectively; p = 0.028) and urea (3F revealed the highest values compared with the other three groups: 19.06 for 3F vs. 13.9 (2F), 13.7 (2FG), and 14.3 (3FG), respectively, p = 0.002) from weaning onwards. The feeding of dairy calves with milk replacer three rather than two times per day tended to be associated with better health from weaning to 4 months old; parameters such as ultrasound lung score and calf health score improved over time (p < 0.001). Thrice-daily feeding with milk replacer tended to reduce the number of artificial inseminations per pregnancy in heifers by 0.2 points (p = 0.092). We confirmed significant correlations between early health and growth parameters and reproductive efficiency and a positive correlation between body weight and average daily weight gain and the thickness of the back fat layer in young heifers (r = 0.245; p < 0.0001; r = 0.214; p < 0.0001 respectively). Our study was conducted on a commercial farm with reasonably effective animal management, so baseline welfare was likely satisfactory., This work was funded by the "Centro para el Desarrollo Tecnologico Industrial" of the Spanish Ministry of Science and Innovation (grant CDTI-IDI-20200936). Patricia Carulla received a grant from Universitat Politecnica de Valencia through the program PAID-01-20. The funders had no role in the study design, data collection or analysis, manuscript preparation, or in the decision to publish the results.