Skip to main content

APLICACION INTEGRADA DE FISICA DE REACTORES PARA SIMULACIONES A GRAN ESCALA

PGC2018-096437-B-I00

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de Generación de Conocimiento y Fortalecimiento Científico y Tecnológico del Sistema de I+D+i
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Proyectos de I+D (Excelencia / Generación de Conocimiento)
Call year 2018
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Application case for phase III of UAM-LWR benchmark: Uncertainty propagation of thermal-hydraulic macroscopic parameters

  • Mesado, C.
  • Miró Herrero, Rafael|||0000-0003-1012-0869
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
[EN] This work covers an important point of the benchmark released by the expert group on Uncertainty Analysis in Modeling of Light Water Reactors. This ambitious benchmark aims to determine the uncertainty in light water reactors systems and processes in all stages of calculation, with emphasis on multi-physics (coupled) and multi-scale simulations. The Gesellschaft für Anlagen und Reaktorsicherheit methodology is used to propagate the thermal-hydraulic uncertainty of macroscopic parameters through TRACE5.0p3/PARCSv3.0 coupled code. The main innovative points achieved in this work are i) a new thermal-hydraulic model is developed with a highly-accurate 3D core discretization plus an iterative process is presented to adjust the 3D bypass flow, ii) a control rod insertion occurrence ¿which data is obtained from a real PWR test¿ is used as a transient simulation, iii) two approaches are used for the propagation process: maximum response where the uncertainty and sensitivity analysis is performed for the maximum absolute response and index dependent where the uncertainty and sensitivity analysis is performed at each time step, and iv) RESTING MATLAB code is developed to automate the model generation process and, then, propagate the thermal-hydraulic uncertainty. The input uncertainty information is found in related literature or, if not found, defined based on expert judgment. This paper, first, presents the Gesellschaft für Anlagen und Reaktorsicherheit methodology to propagate the uncertainty in thermal-hydraulic macroscopic parameters and, then, shows the results when the methodology is applied to a PWR reactor., The authors of this work thank the UAM-LWR benchmark organizers without whom this work would not have been possible. Besides, the authors sincerely thank to the Ministerio de Economia, Industria y Competitividad and the "Plan Nacional de I+D+i" for funding the projects NUC-MULTPHYS ENE2012-34585 and ENE2017-89029-P.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Deterministic neutron transport and burnup code coupling assessment

  • Vivancos-Grau, Arturo
  • Bernal, Álvaro
  • Miró Herrero, Rafael|||0000-0003-1012-0869
  • Barrachina, Teresa|||0000-0001-8794-4204
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
[EN] Nuclide evolution is a key aspect in nuclear reactor design and operation. Burnup (or depletion) codes evaluate the isotopic inventory evolution. The inherent need for nuclear safety, the development in computational capabilities, and new discoveries in related areas, such as mathematical methods, result in constant software re-evaluation and improvement. Now, many stochastic-based burnup codes are being developed in comparison to deterministic-based ones, which also present advantages and interesting aspects. In this work, nuclear li-braries, processing requirements, data workflow, and methodologies are studied for the development of a brand-new burnup code linked to the VALKIN-FVM-Sn deterministic transport code. As a result, the requirements to create, and couple, a burnup code have been assessed, establishing a methodology. The burnup code has been developed and contrasted with an industry reference. The resulting coupling is a lattice code foundation to be used in a Multiphysics platform., This work has been partially supported by Grant PGC2018-096437-B-I00-AR funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe", by the "European Union" and Grant PRE2019-089431 funded by MCIN/AEI/10.13039/501100011033 and by "ESF Investing in your future".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Lambda modes comparison for different approximations of the neutron transport equation: Diffusion, SN and SP3

  • Morató-Rafet, Sergio
  • Kochunas, B.
  • Larsen, E. W.
  • Downar, T.
  • Miró Herrero, Rafael|||0000-0003-1012-0869
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
[EN] The methods presented in this paper solve the Simplified Spherical Harmonics approximation to the mul- tidimensional neutron transport equation. 1D, 2D and 3D systems were modeled with Cartesian geome- try using the finite difference method to discretize the spatial variables. The method is able to simulate any energy group discretization, including up-scattering terms. The Krylov Shur method was used to cal- culate the solution of the steady-state equation by solving a generalized eigenvalue problem. This methodology has the capability to calculate any number of eigenfunctions. A formulation review of the Simplified Spherical Harmonics is explained in this work, as well as, a study of the boundary condi- tions for different approaches of the finite difference method. The results calculated by this methodology are compared with the discrete ordinates and diffusion approximation methods, all of them, using the same spatial discretization in order to show the different accuracy of each method without influence of the method used for discretizing the spatial variable. The results show the validity of each method for different benchmark problems., This work has been partially supported by the Spanish Agencia Estatal de Investigacion [Grant No. BES-2016-076782], the Spanish Ministerio de Economia Industria y Competitividad [project ENE2015-68353-P], [project ENE2017-89029-P-AR] and [project PGC2018-096437-B-I00-AR].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Methodology for neutronic uncertainty propagation and application to a UAM-LWR benchmark

  • Mesado, C.
  • Miró Herrero, Rafael|||0000-0003-1012-0869
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
[EN] This work covers an important point of the benchmark released by the expert group on Uncertainty Analysis in Modeling of Light Water Reactors (UAM-LWR). This ambitious benchmark aims to determine the uncertainty in LWR systems and processes in all stages of calculation, with emphasis on multi-physics (coupled) and multi-scale simulations. Specifically, in this work, a simplified BWR core is used to propagate the uncertainty of nuclear data. Due to a high computational cost in the analysis all fuel assemblies are modeled as fresh. The propagation is subdivided into two levels i) assembly level ¿with SCALE6.2.1 and SAMPLER module¿, and ii) core level, ¿with PARCSv3.2 and DAKOTA 6.3¿. The first level takes into account the uncertainties contained in the master library ENDF/B-VII.1 and as a result a problem-dependent neutronic library in NEMTAB format is obtained using TXT2NTAB code. This is a friendly Matlab code developed within this work. Finally, the uncertainty contained in the neutronic library is further propagated through PARCS. A different approach is presented in this work to propagate the uncertainty between codes. Following this approach only two neutronic libraries are generated, one with the average responses and the other with their standard deviations. Then, the standard deviation and a matrix of perturbation factors are used to perturb the main neutronic parameters. A parallel work is done to propagate the thermal-hydraulic parameters in a PWR core., The authors of this work thank IBERINCO (Iberdrola Ingenieria y Construcci.on, S. A.) for the shared data which made possible the validation of the lattice physics model. Moreover, this work was possible thanks to the UAM-LWR benchmark release, thanks to its organizers who requested the development of TXT2NTAB Matlab program. Finally, the authors sincerely thank to the Ministerio de Economia, Industria y Competitividad, Spain and the "Plan Nacional de IthornDthorni" for funding the projects NUC-MULTPHYS ENE2012-34585 and ENE2017-89029-P.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Calculation of Lambda modes of the multi-group neutron transport equation using the discrete ordinates and Finite Difference Method

  • Morató-Rafet, Sergio
  • Bernal, Á.
  • Miró Herrero, Rafael|||0000-0003-1012-0869
  • Jose E. Roman|||0000-0003-1144-6772
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
[EN] The method explained in this paper solves the steady-state of the neutron transport equation for 1D and 2D systems modeled with Cartesian geometry, by using the Discrete Ordinates method SN for the angular discretization and the Finite Difference Method for the spatial discretization. The method applies the multi-group approach for any energy discretization, including upscattering terms. The method solves the steady-state equation by solving a generalized eigenvalue problem by means of a Krylov-Schur method. One of the main advantages of the method is the capability to calculate multiple eigenfunctions. The Discrete Ordinates methodology is used for the angular discretization, which uses a simple formulation involving the angles and direction cosines. The spatial discretization with Finite Difference Method is selected for its simplicity. The method is validated with several one-dimensional benchmark problems and four two dimensional benchmark problems. The results show good agreement with respect to the reference results for all the cases studied., This work has been partially supported by the Spanish Agencia Estatal de Investigation [Grant No. BES-2016-076782], Ministerio de Eduacion Cultura y Deporte [Grant No. FPU13/01009] and the Spanish Ministerio de Economia Industria y Competitividad [project ENE2015-68353-P].