Skip to main content

DESARROLLO DE UN CODIGO DE TRANSPORTE NEUTRONICO MODAL 3D POR EL METODO DE LOS VOLUMENES FINITOS Y ORDENADAS DISCRETAS

ENE2015-68353-P

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Proyectos de I+D (Excelencia / Generación de Conocimiento)
Call year 2015
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Comparación de diferentes aproximaciones del Transporte Neutrónico: Difusión, SP3 y SN

  • Morató, S.
  • Bernal, Á.
  • Vidal-Ferràndiz, Antoni|||0000-0001-5449-7356
  • Miró Herrero, Rafael|||0000-0003-1012-0869
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
[ES] En este trabajo se presenta una comparación de resultados 1D y 2D para diferentes aproximaciones de la Ecuación del Transporte Neutrónico. La primera de ellas utiliza una discretización angular mediante el método de Ordenadas Discretas (SN) y el Método de Diferencias Finitas (FDM) para la discretización espacial. Tanto la ecuación de la Difusión como la aproximación SP3 utilizan la misma discretización espacial. Por tanto, se han desarrollado 3 códigos que han sido programados en lenguaje de programación FORTRAN, uno para cada aproximación angular. La resolución del problema de autovalores generalizado en cada una de las metodologías expuestas ha sido llevada a cabo mediante el uso de la librería SLEPc calculando varios modos., Este trabajo ha sido parcialmente financiado por la Agencia Estatal Española de Investigación [subvención número BES-2016-076782] y el Ministerio de Economía, Industria y Competitividad y el Fondo Europeo de Desarrollo Regional (MINECO/FEDER) [proyecto ENE2015-68353-P].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Lambda modes comparison for different approximations of the neutron transport equation: Diffusion, SN and SP3

  • Morató-Rafet, Sergio
  • Kochunas, B.
  • Larsen, E. W.
  • Downar, T.
  • Miró Herrero, Rafael|||0000-0003-1012-0869
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
[EN] The methods presented in this paper solve the Simplified Spherical Harmonics approximation to the mul- tidimensional neutron transport equation. 1D, 2D and 3D systems were modeled with Cartesian geome- try using the finite difference method to discretize the spatial variables. The method is able to simulate any energy group discretization, including up-scattering terms. The Krylov Shur method was used to cal- culate the solution of the steady-state equation by solving a generalized eigenvalue problem. This methodology has the capability to calculate any number of eigenfunctions. A formulation review of the Simplified Spherical Harmonics is explained in this work, as well as, a study of the boundary condi- tions for different approaches of the finite difference method. The results calculated by this methodology are compared with the discrete ordinates and diffusion approximation methods, all of them, using the same spatial discretization in order to show the different accuracy of each method without influence of the method used for discretizing the spatial variable. The results show the validity of each method for different benchmark problems., This work has been partially supported by the Spanish Agencia Estatal de Investigacion [Grant No. BES-2016-076782], the Spanish Ministerio de Economia Industria y Competitividad [project ENE2015-68353-P], [project ENE2017-89029-P-AR] and [project PGC2018-096437-B-I00-AR].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Methodology for neutronic uncertainty propagation and application to a UAM-LWR benchmark

  • Mesado, C.
  • Miró Herrero, Rafael|||0000-0003-1012-0869
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
[EN] This work covers an important point of the benchmark released by the expert group on Uncertainty Analysis in Modeling of Light Water Reactors (UAM-LWR). This ambitious benchmark aims to determine the uncertainty in LWR systems and processes in all stages of calculation, with emphasis on multi-physics (coupled) and multi-scale simulations. Specifically, in this work, a simplified BWR core is used to propagate the uncertainty of nuclear data. Due to a high computational cost in the analysis all fuel assemblies are modeled as fresh. The propagation is subdivided into two levels i) assembly level ¿with SCALE6.2.1 and SAMPLER module¿, and ii) core level, ¿with PARCSv3.2 and DAKOTA 6.3¿. The first level takes into account the uncertainties contained in the master library ENDF/B-VII.1 and as a result a problem-dependent neutronic library in NEMTAB format is obtained using TXT2NTAB code. This is a friendly Matlab code developed within this work. Finally, the uncertainty contained in the neutronic library is further propagated through PARCS. A different approach is presented in this work to propagate the uncertainty between codes. Following this approach only two neutronic libraries are generated, one with the average responses and the other with their standard deviations. Then, the standard deviation and a matrix of perturbation factors are used to perturb the main neutronic parameters. A parallel work is done to propagate the thermal-hydraulic parameters in a PWR core., The authors of this work thank IBERINCO (Iberdrola Ingenieria y Construcci.on, S. A.) for the shared data which made possible the validation of the lattice physics model. Moreover, this work was possible thanks to the UAM-LWR benchmark release, thanks to its organizers who requested the development of TXT2NTAB Matlab program. Finally, the authors sincerely thank to the Ministerio de Economia, Industria y Competitividad, Spain and the "Plan Nacional de IthornDthorni" for funding the projects NUC-MULTPHYS ENE2012-34585 and ENE2017-89029-P.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Cross-Section Generation Using TXT2NTAB Code for Uncertainty Propagation with Burnup Dependence

  • Labarile, A.|||0000-0003-1610-7606
  • Miró Herrero, Rafael|||0000-0003-1012-0869
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
  • Mesado, C.
[EN] One of the challenges of studying the neutronics of reactors is to generate reliable parameterized libraries that contain information to simulate the core in all possible operational and transient conditions. These libraries must include tables of cross sections and other neutronic and kinetic parameters and are obtained by simulating all the segments in a transport code. At the lattice level, one can use branch calculations to change ¿instantaneously¿ the feedback parameters as a function of burnup. When using random sampling for the lattice calculations, one can obtain statistical information about the output parameters and use it in a core simulation to characterize the accuracy of data estimating uncertainties when simulating a heterogeneous system at different scales of detail. This work presents the methodology to generate NEMTAB libraries from data obtained in the SCALE code system to be used in PARCS simulations. The code TXT2NTAB is used to reorder the cross-section tables in NEMTAB format and generate another NEMTAB of standard deviation. With these libraries, the authors perform a steady-state calculation for a light water reactor to propagate several uncertainties at the core level. The methodology allows obtaining statistical information of the most important output parameters: multiplication factor keff, axial power peak Pz, and axial peak node Nz., This work has been partially supported by Spanish Ministerio de Economia y Competitividad under projects ENE2017-89029-P.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Multigroup neutron diffusion equation with the finite volume method in reactors using MOX fuels

  • Bernal-Garcia, Alvaro
  • Jose E. Roman|||0000-0003-1144-6772
  • Miró Herrero, Rafael|||0000-0003-1012-0869
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
[EN] The use of mixed oxide (MOX) fuel to partially fill the cores of commercial light water reactors (LWRs) gives rise to a reduction of the radioactive waste and production of more energy. However, the use of MOX fuels in LWRs changes the physics characteristics of the reactor core, since the variation with energy of the cross sections for the plutonium isotopes is more complex than for the uranium isotopes. Although the neutron diffusion theory could be applied to reactors using MOX fuels, more emphasis on treatment of the energy discretization should be placed. This energy discretization could be typically 4¿8 energy groups, instead of the standard 2-energy group approach. In this work, the authors developed a finite volume method for discretizing the general multigroup neutron diffusion equation. This method solves the eigenvalue problem by using Krylov projection methods, in which the size of the vectors used for building the Krylov subspace does not depend on the number of energy groups, but it can solve the multigroup formulation with upscattering and fission production terms in several energy groups. The method was applied to MOX reactors for its validation. © 2017 Atomic Energy Society of Japan. All rights reserved., This work has been partially supported by the Spanish Ministerio de Eduacion Cultura y Deporte [grant number FPU13/01009]; the Spanish Ministerio de Ciencia e Innovacion [project ENE2014-59442-P]; the Spanish Ministerio de Economia y Competitividad and the European Fondo Europeo de Desarrollo Regional (MINECO/FEDER) [project ENE2015-68353-P]; the Generalitat Valenciana [project PROMETEOII/2014/008]; and the Spanish Ministerio de Economia y Competitividad [project TIN2016-75985-P].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A Krylov-Schur solution of the eigenvalue problem for the neutron diffusion equation discretized with the Raviart-Thomas method

  • Bernal-Garcia, Alvaro
  • Hébert, Alain
  • Jose E. Roman|||0000-0003-1144-6772
  • Miró Herrero, Rafael|||0000-0003-1012-0869
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
[EN] Mixed-dual formulations of the finite element method were successfully applied to the neutron diffusion equation, such as the Raviart¿Thomas method in Cartesian geometry and the Raviart¿Thomas¿Schneider in hexagonal geometry. Both methods obtain system matrices which are suitable for solving the eigenvalue problem with the preconditioned power method. This method is very fast and optimized, but only for the calculation of the fundamental mode. However, the determination of non-fundamental modes is important for modal analysis, instabilities, and fluctuations of nuclear reactors. So, effective and fast methods are required for solving eigenvalue problems. The most effective methods are those based on Krylov subspaces projection combined with restart, such as Krylov¿Schur. In this work, a Krylov¿Schur method has been applied to the neutron diffusion equation, discretized with the Raviart¿Thomas and Raviart¿Thomas¿Schneider methods., This work has been partially supported by the Spanish Ministerio de Eduacion Cultura y Deporte [grant number FPU13/01009]; Spanish Ministerio de Ciencia e Innovacion [project number ENE2014-59442-P]; Spanish Ministerio de Economia y Competitividad and the European Fondo Europeo de Desarrollo Regional (FEDER) [project number ENE2015-68353-P (MINECO/FEDER)]; Generalitat Valenciana [project number PROMETEOII/2014/008]; Universitat Politecnica de Valencia [project number UPPTE/2012/118]; Spanish Ministerio de Economia y Competitividad [project number TIN2016-75985-P].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Calculation of multiple eigenvalues of the neutron diffusion equation discretized with a parallelized finite volume method

  • Bernal-Garcia, Alvaro
  • Jose E. Roman|||0000-0003-1144-6772
  • Miró Herrero, Rafael|||0000-0003-1012-0869
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
[EN] The spatial distribution of the neutron flux within the core of nuclear reactors is a key factor in nuclear safety. The easiest and fastest way to determine it is by solving the eigenvalue problem of the neutron diffusion equation, which only contains spatial derivatives. The approximation of these derivatives is performed by discretizing the geometry and using numerical methods. In this work, the authors used a finite volume method based on a polynomial expansion of the neutron flux. Once these terms are discretized, a set of matrix equations is obtained, which constitutes the eigenvalue problem. A very effective class of methods for the solution of eigenvalue problems are those based on projection onto a low-dimensional subspace, such as Krylov subspaces. Thus, the SLEPc library was used for solving the eigenvalue problem by means of the Krylov-Schur method, which also uses projection methods of PETSc for solving linear systems. This work includes a complete sensitivity analysis of different issues: mesh, polynomial terms, linear systems solvers and parallelization., This work has been partially supported by the Spanish Ministerio de Eduacion Cultura y Deporte under the grant FPU13/01009, the Spanish Ministerio de Ciencia e Innovacion under the project ENE2014-59442-P, the Spanish Ministerio de Economia y Competitividad and the European Fondo Europeo de Desarrollo Regional (FEDER) under the project ENE2015-68353-P (MINECO/FEDER), the Generalitat Valenciana under the project PROMETEOII/2014/008, and the Spanish Ministerio de Economia y Competitividad and the European Fondo Europeo de Desarrollo Regional (FEDER) under the project TIN2016-075985-P.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Calculation of Lambda modes of the multi-group neutron transport equation using the discrete ordinates and Finite Difference Method

  • Morató-Rafet, Sergio
  • Bernal, Á.
  • Miró Herrero, Rafael|||0000-0003-1012-0869
  • Jose E. Roman|||0000-0003-1144-6772
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
[EN] The method explained in this paper solves the steady-state of the neutron transport equation for 1D and 2D systems modeled with Cartesian geometry, by using the Discrete Ordinates method SN for the angular discretization and the Finite Difference Method for the spatial discretization. The method applies the multi-group approach for any energy discretization, including upscattering terms. The method solves the steady-state equation by solving a generalized eigenvalue problem by means of a Krylov-Schur method. One of the main advantages of the method is the capability to calculate multiple eigenfunctions. The Discrete Ordinates methodology is used for the angular discretization, which uses a simple formulation involving the angles and direction cosines. The spatial discretization with Finite Difference Method is selected for its simplicity. The method is validated with several one-dimensional benchmark problems and four two dimensional benchmark problems. The results show good agreement with respect to the reference results for all the cases studied., This work has been partially supported by the Spanish Agencia Estatal de Investigation [Grant No. BES-2016-076782], Ministerio de Eduacion Cultura y Deporte [Grant No. FPU13/01009] and the Spanish Ministerio de Economia Industria y Competitividad [project ENE2015-68353-P].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

3D calculation of the lambda eigenvalues and eigenmodes of the two-group neutron diffusion equation by coarse-mesh nodal methods

  • J. L. Muñoz-Cobo|||0000-0002-4512-7991
  • Miró Herrero, Rafael|||0000-0003-1012-0869
  • Wysocki, A.
  • SOLER DOMINGO, AMPARO
[EN] This paper shows the development and roots of the lambda eigenvector and eigenmodes calculation by coarse-mesh finite difference nodal methods. In addition, this paper shows an inter-comparison of the eigenvalues and power profiles obtained by different 3D nodal methods with two neutron energy groups. The methods compared are: the nodal collocation method (Verdú et al., 1998, 1993; Hebert, 1987) with different orders of the Legendre expansions, the modified coarse-mesh nodal method explained in this paper, and the method implemented in the PARCS code by Wysocki et al. (2014, 2015). In this paper we have developed a program NODAL-LAMBDA that uses a two-group modified coarse-mesh finite difference method with albedo boundary conditions. Some of the approximations performed originally by Borressen (1971) have been discarded and more exact expressions have been used. We compare for instance the eigenvalues and power profiles obtained with Borressen original approach of 1.5 group and with 2 groups. Also, some improvements in the albedo boundary conditions suggested by (Turney 1975; Chung et al., 1981) have been incorporated to the code as an option. The goal is to obtain the eigenvalues and the sub-criticalities (ki¿k0) of the harmonic modes that can be excited during an instability event in a fast way and with an acceptable precision., The authors of this paper are indebted to IBERDROLA generacion nuclear for provide support and funding to perform this work.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Assembly Discontinuity Factors for the Neutron Diffusion Equation discretized with the Finite Volume Method. Application to BWR

  • Bernal-Garcia, Alvaro
  • Jose E. Roman|||0000-0003-1144-6772
  • Miró Herrero, Rafael|||0000-0003-1012-0869
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
The neutron flux spatial distribution in Boiling Water Reactors (BWRs) can be calculated by means of the Neutron Diffusion Equation (NDE), which is a space- and time-dependent differential equation. In steady state conditions, the time derivative terms are zero and this equation is rewritten as an eigenvalue problem. In addition, the spatial partial derivatives terms are transformed into algebraic terms by discretizing the geometry and using numerical methods. As regards the geometrical discretization, BWRs are complex systems containing different components of different geometries and materials, but they are usually modelled as parallelepiped nodes each one containing only one homogenized material to simplify the solution of the NDE. There are several techniques to correct the homogenization in the node, but the most commonly used in BWRs is that based on Assembly Discontinuity Factors (ADFs). As regards numerical methods, the Finite Volume Method (FVM) is feasible and suitable to be applied to the NDE. In this paper, a FVM based on a polynomial expansion method has been used to obtain the matrices of the eigenvalue problem, assuring the accomplishment of the ADFs for a BWR This eigenvalue problem has been solved by means of the SLEPc library. (C) 2016 Elsevier Ltd. All rights reserved., This work has been partially supported by the Spanish Ministerio de Eduacion Cultura y Deporte under the grant FPU13/01009, the Spanish Ministerio de Ciencia e Innovacion under projects ENE2014-59442-P, the Spanish Ministerio de Economia y Competitividad and the European Fondo Europeo de Desarrollo Regional (FEDER) under project ENE2015-68353-P (MINECO/FEDER), the Generalitat Valenciana under projects PROMETEOII/2014/008, the Universitat Politecnica de Valencia under project UPPTE/2012/118, and the Spanish Ministerio de Economia y Competitividad under the project TIN2013-41049-P.